Quality inspector jobs in Gloucester, NJ

Job Purpose Nondestructive Testing (NDT) Level III Radiographer (RT) is tasked with the day-to-day operations of the NDT department and supervision of NDT inspectors. Provide real time x-ray service and support to the assigned projects and programs to ensure product meets customer quality requirements. Essential Duties and Responsibilities: Radiographer (RT) Level III Real Time x-ray certification Knowledge of real time x-ray equipment and imaging software, radiographer interpretations Maintain all X-Ray related Equipment / Systems Perform Real-time X-Rays on products and components per existing Procedures and Operating Instructions for internal and external customers Train, qualify and certify NDT RT inspection personnel Write NDT Procedures Develop NDT X-ray inspection techniques Support manufacturing operation level procedures, inspection techniques Support NDT investigations, perform inspections and participate in supplier audit if required Ensure compliance with customer and certification agency regulations Provide NDT RT certification and data for completed X-ray inspections Maintain safe work environment with X-ray monitor equipment, maintain x-ray report and digital logs for Florida Department of Health audits Other duties as assigned Travel 30-40% Qualifications : To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High School Diploma or equivalent; Associates Degree preferred Five (5) years of work experience as NDT RT Level II in aerospace inspections Certified ASNT NDT Level III Familiar with quality system requirements (ASME Section III, ANSI, NQA-1, AS9100, ISO9001, etc.) Ability to read, interpret, and apply engineering drawings and specifications Competent computer skills, including MS Office, specifically Word and Excel Ability to read, write, and understand English Minimum and Preferred Qualifications: Must be qualified and certified to ASNT-TC-1A in the following NDT Methods that will be utilized: Radiographic (RT) Preferred candidate will be Certified in one or more of the following NDT methods in conjunction with RT: Visual Examination (VT), Liquid Penetrant Examination (PT) Magnetic Particle Examination (MT) Ultrasonic Examination Required education: Required: High School diploma or equivalent with at least 3 years of inspection related experience. Preferred: 2 years of inspection related experience with a completion of 2 years or college in technical or engineering related discipline from a university, college, or technical school. Preferred:1 year of inspection related experience with a degree in engineering or science from a university or accredited college. Required Licenses or Certifications: Valid Driver's License Previous Level III Certification to ASNT-TC-1A including documented objective evidence of classroom and on the job training experience

Job DescriptionJob Summary: Quality Inspector:Precision Machine Shop is seeking a dedicated and detail-oriented Quality Inspector to join our team. The Quality Inspector will be responsible for ensuring that our products meet the highest quality standards, from incoming raw materials, In-process assemblies, to finished goods. They will play a vital role in maintaining our reputation as a trusted manufacturer of precision metal products. Responsibilities: Quality Inspector: Conduct inspections on incoming raw materials, parts, sub-assemblies, and finished goods to ensure compliance with quality specifications and standards. Follow established inspection checklists, testing procedures, and documentation protocols. Perform visual inspections, measurements, and functional tests utilizing various tools. Identify and document non-conformities, defects, and discrepancies, and work closely with the production team to address and resolve issues promptly. Adhere to relevant quality standards, regulations, and industry best practices. Participate in internal quality audits and assist in the implementation of corrective and preventive actions. Provide timely and accurate inspection reports and documentation. Collaborate with cross-functional teams to drive continuous improvement initiatives related to quality control and assurance. Stay updated on industry trends, advancements, and regulatory changes related to quality assurance. Maintain a clean and organized work area, ensuring that all testing equipment is properly calibrated and maintained. Requirements: Quality Inspector High school diploma or equivalent; additional technical certifications or qualifications in quality assurance are preferred. Proven experience as a Quality Inspector, preferably in the metal fabrication or manufacturing industry Strong knowledge of quality control principles, methods, and techniques Proficient in using measurement tools and equipment such as calipers, micrometers, gauges, and CMM (Coordinate Measuring Machine) Excellent attention to detail with an ability to identify and document quality issues effectively. Familiar with reading and interpreting engineering drawings, specifications, and technical documentation Good communication skills, both written and verbal Ability to work independently and collaboratively within a team environment. Familiarity with ISO 9001 or other quality management systems is a plus. Knowledge of Lean Six Sigma methodologies is an added advantage. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

Conduct Receiving, In-process and Final Inspections of Parts, Containers, Shelters, and Welded Structural Steel Fabricated Assemblies by performing Dimensional Inspection, VT, and NDE IAW AWS and Military Specifications. Perform wind, light, water leak, and paint performance tests. Witness electrical testing on all components. Sign each traveler line item as each task is performed and checked before movement to next process step to maintain traceability. Calibrate and Maintain TME and Manufacturing equipment. Complete Inspection Reports, and Sign Product Conformance Release Finished Product. Maintain Records of Acceptance to ISO9001 Standard. Report findings to supervisor. Job Summary: This position reports to the Quality Manager. The ideal candidate possesses a basic understanding of manufacturing, fabrication, assembly, and welding processes of Structural Steel Products. Ability to read different types of schematic drawings. Ability to use basic inspection equipment, prepare and write inspection reports. Responsibilities: * Accident prevention - actively identify, correct and/or report safety hazards to prevent accidents. * Actively identify and pursue cost reduction and efficiency/profit improvement opportunities. * Support the ISO 9001 Quality Management System and the Sea Box Quality Policy calling for self-inspection of your work product. * Determines quality and reliability standards by studying drawings and formulas; verifying specifications with engineering staff. * Perform NDE of Welds and Welding Processes IAW AWS, Military, and Customer Specifications. * Identifies raw material condition by inspecting materials samples; conducting inspections and physical tests of materials. * Identifies in-process product condition by inspecting samples during productions process; conducting in-process inspections and physical tests. * Determines disposition of finished products by collecting, classifying, analyzing, and interpreting production and quality data; determine product acceptability in comparison to specifications. * Determines acceptability or rework by conducting inspections and physical tests of reworked product. * Documents finished product status by recording and summarizing raw materials, in-process, and finished-product inspection and physical test data; updating quality assurance data based. * Maintains quality assurance operations by following quality assurance policies and procedures; reporting needed changes. * Contributes to team effort by accomplishing related results as needed. * Perform precision inspection with equipment such as calipers, micrometers, depth gauges, plug gauges and comparator * Performs other duties as assigned * Must be able to fulfill essential job function in a consistent state of alertness and safe manner. Why work for Sea Box? We offer benefits to our full-time employees that include: * Health Insurance * Dental Insurance * Vision Insurance * Basic and Voluntary Life * Long-Term Disability * Flexible Spending Accounts * Employee Assistance Program * Paid Time Off * Paid Holidays, Bereavement, Jury Duty * 401(k) with company match * Employee Referral Program Employees are eligible for most benefits on the 1st of the month following date of hire. Salary Range: $40,000 - $55,000 Location: This position is onsite (non-remote) at the Company's corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Company's normal 8:30am - 5:30pm hours of operation. Requirements Experience: 3-5 years' work related experience. Education: High school diploma or equivalent. ASQ or AWS Certifications helpful. Salary Description $40,000 - $55,000

SP Industries Inc. is expanding our team in Vineland, NJ and have immediate openings for a Quality Inspector. In this role, the right candidate will perform assigned quality assurance tasks including inspection of incoming, in process and final auditing. They will assure that project product and process requirements comply with the ISO9000 quality system standards This position reports directly to the Quality Manager. Hours are Monday- Thursday on 1st Shift - 4/10s schedule. Essential Duties and Responsibilities Visually inspects glassware, where defects may be difficult to see Assists the Quality Manager with data gathering part inspections, continuous improvement projects, corrective action follow ups and ISO9000 maintenance duties as assigned Performs receiving inspections, in process inspection and final inspection Must keep track of results and inform Quality Manager of findings Assures that inspection records test quality plans are complete and accurate Performs daily scheduled system quality process audits and specified 100 inspection of in process and final products Uses diverse measuring devices and equipment like calipers, micrometers, pin and fixture gages, among others to evaluate glassware quality compliance Interpreting mechanical drawings and specifications that are job related Education and/or Experience High School Diploma or GED Must possess adequate visual acuity with or without corrective lenses Prior experience working in a team oriented environment 2-5 years of glass experience preferred Appropriate hand and eye coordination HSE All employees have the responsibility to work in a safe manner and report any health, safety or environmental concern to their manager or supervisor in a timely manner. Employee responsibilities for Health, Safety and Environment include: Work in compliance with divisional health, safety and environmental procedures Refrain from removing or altering safety devices or guarding unless hazardous energies are controlled through lockout-tagout methods Report any unsafe conditions or unsafe acts Report defect in any equipment or protective device Ensure that the required protective equipment is used for the assigned tasks Attend all required health, safety and environmental training Report any accidents/incidents to supervisor Assist in investigating accidents/incidents Refrain from engaging in any prank, contest, feat of strength, unnecessary running or rough and boisterous conduct Why SP Industries Inc.? The three parallelograms in our logo reflect our core company values: People, Process, and Performance. As part of ATS, Scientific Products leverages the ATS Business Model (ABM) to train, develop, engage, empower, and energize our people to make impactful changes in the organization. Our relentless focus on people is what continues to set us apart as a great place to build a career. • We provide a wide range of innovative and high-quality scientific products that improve people's lives • We offer a robust health and welfare benefits package that includes Life, Health, Dental, Vision • We offer 401(K) including company match, Paid Time Off annually + Paid Holidays • You will enjoy career Advancement Opportunities and Tuition Assistance to help you achieve your goals and continue your career growth ATS is a $2.2B publicly-traded global enterprise with a proud 40-year history of helping advance the future with automation solutions. Scientific Products sits within the ATS Life Sciences Group and is a leading global provider of state-of-the-art fill-finish drug manufacturing solutions, research, pilot and production lyophilizers, laboratory equipment and supplies, and specialty glassware. Scientific Products supports research and production across diverse end-user markets including pharmaceuticals, life science, ophthalmic, environmental testing and monitoring, food and beverage and more. Scientific Products has a long and successful track record of quality and science innovation, and is headquartered in Warminster, Pennsylvania, with production facilities in the USA and Europe. Scientific Products offers a world-wide sales and service network including product training and technical assistance. For more information visit *************************** EEO and Affirmative Action Statement: SP is an Equal Opportunity Employer, dedicated to a policy of non-discrimination in employment on any basis and takes affirmative action to ensure equal employment opportunities. It is our policy to provide our employees and applicants with equal employment opportunities in accordance with applicable laws and not to discriminate on the basis of race, color, religion, ancestry, national origin, age, marital status, sex, gender identification, sexual orientation, genetic information, political belief, pregnancy, citizenship, handicap or disability, status as a veteran or member of the U.S. military, or any other characteristic protected by applicable federal, state, or local laws. SP's Affirmative Action Plan is available through the HR Department and may be accessed during normal business hours. Pay Transparency Nondiscrimination Provision: SP will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.

Job DescriptionDescription: Since 1904, Nelson Miller Group (NMG) has been a leading global provider of custom solutions, partnering with organizations across industrial, IoT, lighting, medical, telecommunications, consumer, and aerospace and defense sectors. We bring complex products to life by solving intricate challenges in engineering design, manufacturing, and supply chain management. Our expertise spans Human-Machine Interface (HMI) solutions, value-added distribution, plastics, membrane switches, overlays, touch panels, electronics, metals, and cables. Our century-long legacy is built on a deep commitment to innovation, operational excellence, and unwavering customer satisfaction. These principles drive everything we do as we continue to grow and expand our global market presence. General Description Inspects molded and assembled product or parts for work quality, dimensional accuracy, conformance to drawings, internal specifications, and customer-supplied specifications using precision measuring and testing instruments and equipment. This individual is required to handle the day-to-day shift inspections and all measurement tools. Duties and Responsibilities Reads inspection logs and quality plans to determine mature and sequence inspection. Perform basic functions such as locating part specific programming, following fixturing outlines, and taking basic digital readout measures Reviews blueprints and product quality plans to locate critical dimensions and cosmetic criteria used during inspection. Inspects molded parts and assemblies during all phases of fabrication and assembly to ensure adherence to cosmetic and dimensional specifications. Measures parts and assemblies for dimensional accuracy using precision measuring instruments, templates, jigs, and fixtures. Accepts or rejects parts and assemblies, prepares documentation to record inspection results, and segregates unacceptable products. Confers with production and other personnel to coordinate the inspection process and to discuss inspection results. Inspects packaging of product to determine compliance with internal packaging instructions Inspects purchased parts, assemblies, accessories, and materials for conformance to specifications using precision measuring instruments and devices. Examines items for defects in materials, workmanship, and damage occurring in transit. Accepts or rejects purchased product, prepares documentation to record inspection results, and segregates unacceptable products. May prepare inspection procedure outlines for reference use in subsequent inspections using data obtained from blueprints, customer specifications, and catalogs. Assists machine operators in determining product quality conformance. Trains new and existing machine operators on operator tasks and product quality specific to each production item. Maintains a clean and orderly work area. Provides information and suggestions for improvement of product, processes, and the quality management system. May occasionally perform the duties of machine operator as directed by supervisor. All other duties as assigned. Qualification Requirements General: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and or ability required. Experience with vision systems (Keyence, OGP, Mitutoyo, and similar) required. Experience with hand tools (calipers, micrometers, height gages, and similar) required. Understanding of basic blueprint reading required. Education: High school diploma or general education degree (GED); and a minimum of one year manufacturing experience and/or training; or equivalent combination of education and experience. Experience with injection molding or plastics required. ASQ certification is a plus. Language Skills: Ability to write routine reports and correspondence. Ability to speak effectively to all employees of the organization. Ability to comprehend and comply with written and verbal procedures, instructions, and assignments. Ability to deal with situations involving several variables in standard manufacturing conditions. Ability to actively participate in group problem solving activities. Mathematical Skills: Ability to add subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to use ratios and percents. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Other Skills and Abilities: Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit and talk or hear. The employee is occasionally required to stand, walk, and use hands to finger, handle, or feel objects, tools, or controls. The employee must frequently lift and or move up to 10 lbs. and occasionally lift and or move up to 25lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts and is exposed to humid conditions. The noise level in the work environment is usually moderate. Due to ITAR and / or CUI compliance, this position requires candidates to be a U.S. Citizen, Permanent Resident Alien, or Protected Individual per 8 U.S.C.1324b(a)(3). Candidates being considered for hire must pass a pre-employment background check. Compensation and Benefits: Pay Range: $17.50/hr - $24.00/hr (Pay to be determined by the experience, knowledge, skills, and abilities of the candidate, and alignment with market data) Benefits Offered: Comprehensive benefit package including medical, dental and vision coverage; company-paid basic life/AD&D insurance, short-term and long-term disability insurance; voluntary supplemental insurances, flexible spending accounts and employee assistance program (EAP). Sick Leave, Vacation Time, and company-paid Holidays are also provided as paid time off. Nelson Miller Group also provides a 401(k) Retirement Savings Plan option with a safe harbor non-elective company contribution. Nelson Miller Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran status, or any other characteristic protected by applicable federal, state, or local law. Requirements:

MAJOR JOB DUTIES AND RESPONSIBILITIES (List in order of importance) Complies with company policies, procedures, work instructions and training requirements. Positively Influences peers and other line-level personnel to comply and adhere to applicable requirements. Carries out responsibilities in compliance with the Quality Manual and applicable regulations (cGMP, MDD and GDPMDS). Performs attribute inspection activities to determine acceptability of kit, components, and/or shipped packages; documents the results. Sends kit back to production team or manually corrects kit when errors are discovered; documents and tracks any errors. Performs batch record review for conformance to Good Documentation Practices. Performs assembly lot review and forwards documentation to Supervisor/Manager. Physically demarcates, stages, packs and/or palletizes accepted kits/shipped orders. Assists in the maintenance of an organized production environment, free of distractions and debris. Performs other duties as assigned.

Job DescriptionQuality Control Inspector - Level III The Level III Inspector is responsible for performing complex first article, in-process, and final inspections to ensure that precision machined components, assemblies, and products meet all customer and company quality standards. Work involves inspection of diversified, tight-tolerance parts for industries such as aerospace, medical, defense, and semiconductor manufacturing. Responsibilities may also include supplier audits and qualification activities. This position requires extensive hands-on experience with precision machining processes, engineering drawings/blueprints, and Geometric Dimensioning and Tolerancing (GD&T). The Level III Inspector develops inspection procedures, designs specialized gauging or measurement setups, and uses a range of precision and electronic measuring instruments. The role also includes programming and setup of Coordinate Measuring Machines (CMMs) and OGP vision systems, as well as training other inspectors in their use. Primary Responsibilities Verify that precision machined parts and assemblies meet all customer and internal specifications for quality and conformance. Accurately document all inspections and verifications through signatures, stamps, or electronic records. Review and confirm the completeness and accuracy of supplier certifications. Lead quality initiatives for assigned customers and support general quality efforts across all programs. Mentor and train Level I and Level II inspectors on inspection techniques, control plans, and FAI (First Article Inspection) reporting. Serve as the primary trainer for CMM and OGP vision system programming and operation. Promote and maintain a safe, organized, and 5S-compliant work environment. Support workload management within the inspection area to ensure efficiency and accuracy. Perform additional duties as directed by management. Knowledge and Skill Requirements Extensive experience inspecting precision machined components and tight-tolerance mechanical parts. Thorough understanding of engineering drawings, blueprints, and GD&T, with the ability to interpret and train others in these standards. Strong knowledge of both English and Metric measurement systems. Proficiency with statistical tools and variance analysis. Skilled in the use of precision measuring instruments and electronic devices (micrometers, height gages, surface plates, comparators, CMMs, OGP systems, etc.). Ability to interpret customer specifications, national standards, and technical documentation. Strong communication, mentoring, and collaboration skills with the ability to work effectively with employees, management, and customers. Physical Requirements Annual eye examination and one-time Ishihara (Color Blindness) Test required from an accredited eye care professional. Working Conditions Standard manufacturing and inspection environment. May require light lifting, standing, walking, and sitting for extended periods. Occasional local travel and weekend work may be required

About the Role: TAI is looking for a seasoned API 653 Inspector to lead and manage large above-ground tank inspection projects. The ideal candidate will have at least 10 years of experience, with a proven track record of supervising teams, overseeing all project phases from start to finish, and serving as a key point of contact for major clients in the chemical and power generation industries. If you are a self-motivated leader with a knack for problem-solving and a desire to make a significant impact, we offer a challenging role with the opportunity to take ownership of high-profile projects. Join our team and play a critical part in ensuring the safety and integrity of essential infrastructure. About TAI: TAI has been a leading multidisciplinary firm for over 35 years, providing expert engineering, management, and technical services to industrial, manufacturing, commercial, and mission critical markets. With over 300 skilled professionals, 16 different divisions, and 6 offices across the US, TAI offers sole-source solutions for complex projects, built on long-term client partnerships and a culture that attracts top talent. Team members at TAI are capable, well-rounded, flexible, and optimistic. We have found that the best employees are the ones who recognize the importance of what they do and the ones who let that guide them in the actions they take. More than any skill, we seek people who make decisions that support the common good. We work for our clients, and we work for one another. Here's a glimpse into your day to day: * Provide project management support on Large Above ground Tank Inspection projects, and as needed for other inspection projects. * Ensure project deliverables meet TAI and client expectations * Manage all phases of a project - setup, execution, and closeout * Develop and maintain project schedules and budgets. * Provide a single point of contact between TAI and client - getting info from client to carry out successful inspection project, providing the client with necessary information and resolving most project issues with the client. * Prepare initial budget, tracking overall costs, approving pending invoices, and pursuing change orders as required. * Perform overall project quality control. * Visit field to scope out projects. * Support proposal development by assisting with scope development, cost estimating and execution plan coordination. * Experience and knowledge of Magnetic Flux Leakage Technology (MFL). * Experience and knowledge of floating roofs and seal inspections. * Meet with clients to provide recommendations on the repair/ replacement/alteration of plant equipment as required for safe operation. * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. * Conduct daily safety risk assessments on routine and non-routine job tasks. * Scheduling activities related to inspection. * Prepare isometric drawings and field sketches of piping for pipe inspections * Review and interpret P&ID's * Writes detailed inspection reports and maintains documentation of inspection activities. * Identifies circumstances that necessitate the use of proper safety procedures and equipment. * Communicate with clients and other parties in such a manner as to benefit the professional reputation of the company. You'll be a perfect fit if you have: * High School Diploma, some college coursework preferred. * API 653 Certification. * Have a minimum of 10 years' experience working as an API Inspector within related industry * At least 5 years' experience managing large Above Ground Tank Inspection projects. * Prior experience supervising a project team * Self-motivated individual with the ability to work independently and oversee large projects. * Experienced with using Magnetic Flux Leakage Technology (MFL) * Demonstrated ability to perform complete inspection reports for equipment or piping. * Inspection: Know the significance of what is observed and recognize the potential significance of what cannot be observed. Critical-minded and curiosity as to conditions and findings. * Documentation: Clarity, comprehensiveness, and professional presentation of reports. * High reach operation ability. * Demonstrated leadership, interpersonal and communication skills. * Travel: Will travel up to 50% out of town. Physical Requirements: * Capacity to perform physically demanding work: Climbing, pipe rack walking, tight-spot body positioning/maneuvering. * Must be able to remain in a stationary position as necessary to complete assigned tasks. * The person in this position needs to frequently move about client's facilities and offices to access equipment and complete tasks. * Consistently ascend and descend portable and fixed ladders, scaffolding and other equipment used to reach equipment at various levels of height some of which maybe in excess of 25 feet in a safe manner. * Must be able to ascend and descend a large quantity of stairways at any given time. * Frequently move tools and equipment weighing up to 50lbs across client facilities as needed to complete tasks. * Occasionally lift and move equipment in excess of 100lbs in a safe manner. * Must be able to work in outdoor weather conditions as needed. Compensation and Benefits: * Pay: $55-65/hour (based upon experience) * Annual Profit Sharing Bonus (variable) * PTO and Paid Holidays * Health Benefits: Employee through family level coverage for medical, dental, and vision insurances. Company funded life and long-term disability insurances. Short Term Disability, FSA, HSA, EAP, and supplemental life insurances (employee - family) are also available! * 401(k)with employer match Other Offerings: * The opportunity to make a real impact on a variety of industry-leading projects. * The ability to balance your work and family activities. * Flexible work schedule * Work in a dynamic and collaborative environment that values creativity and innovation. * A chance to learn and grow alongside some of the brightest minds in engineering. * Professional Development, Tuition Reimbursement, and Association Membership Reimbursements. Discover what makes TAI a top-20 manufacturing partner, according to Engineering News-Record (ENR), and one of the top-50 fastest-growing private companies in the Baltimore Business Journal. Learn more about us at ***********************

C & L Inspection was built on a mission to be the most trusted US Services Company delivering top-notch performance with uncompromising integrity. This way of thinking has set us above the competition. We are looking for knowledgeable, safety minded people to join our team as we grow. Job Title: Sr. Craft InspectorLocation: Middletown, PA (Surrounding Areas) Duration: 03/010/2024-12/31/2024Job Description:· The Sr. Craft Inspector performs the quality control (QC) function over the contractor's work as a part of the Company's quality assurance program and is responsible for the completion of all activities in his area of assignment in accordance with the appropriate Company specifications and the approved for construction drawings. Duties may include, but are not limited to:· Right-of-Way Clearing and Grading' Ditching, Stringing, and Bending' Lowering, Padding, and Backfilling' Road Boring' Tie-ins' Clean-up' inspection.· The inspector works under the direction of the Chief Inspector may be assigned additional responsibilities as required· The inspector provides quality assurance through inspection of work and materials for conformance to requirements.· The inspector is to complete required documentation (i.e. reports and log books) in a timely, concise, and accurate manner.· Familiarization with the approved construction drawings and the appropriate Company specifications in order to assure the work is performed in accordance with those requirements.· Familiarization with Contract documents (Agreement) as it relates to his or her duties on the project· Familiarization with applicable industry and regulatory codes' Familiarization with the Pre-Job Notes · Familiarization with the sequence of the work and plan inspection of upcoming activities· Report safety issues to the Chief Inspector and Safety Inspector· Drawing markups for as-built records· Hydrostatic tests and any test failures· Quantity, size, wall thickness, grade, heat number, other pipe nomenclature and pipe coating, and its location· Understanding the basics of pipe alignment, welding, and its inspection (specialized inspectors are required for the actual inspection)· Condition of ditch bottom Rocks, roots, clay, and other debris· Lifting and lowering in equipment· Understanding, monitoring, assessing, and reporting on painting and coating activities and items including but not limited to:· Vendor Product data sheet utilization· Proper application of paint and/or coating· Proper setup and use of holiday detector / jeep Requirements:· API 1169· OSHA 10 or OSHA 30· 10 years hands on experience· 5 years supervisor experience C & L Inspection offers a full slate of Inspection, Construction Management and Engineering personnel to the Petroleum, Natural Gas and Telecom Industries. We surpass others in the industry by providing the newest technology, training and support that is unequaled. Working together with our inspectors and clients, our team strives to set a new bar for the Pipeline & Utilities Inspection industry. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

This position is responsible for completing, but not limited to, lot control (when required) and quality inspections, paperwork and maintaining a filing system for this paperwork. The position may also perform incoming inspection, product and process audits on material. The QC Inspector will assist with calibration plus final inspection and acceptance for in plant processes. This inspector may also be requested at times to provide coverage in other locations/divisions than currently assigned. ESSENTIAL DUTIES AND RESPONSIBILITIES: Record lot traceability information and maintain lot traceability database. Conduct inspections - incoming inspections, PDS inspections Product audits and final product quality inspections. RGA support Ensure/Assist with calibration of equipment Participates in the Internal Audit Program Operates all equipment in a safe and professional manner, while completing tasks on a timely basis. Understand the DWK Quality Policy and relevant Quality Objectives. Recognize his/her contribution to the effectiveness of the OPS including the benefits of improved performance. Observe all safety precautions, rules and regulations and maintains work area in a clean and safe manner. Works within the guidelines of ISO and EHS. Other duties as assigned. Education and/or Experience High School diploma or GED equivalent preferred One (1) year experience in a manufacturing environment preferred One (1) year of prior quality experience preferred Computer literate. SAP knowledge a plus. Work Environment / Conditions / Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to walk, stand, sit, use hands and fingers, reach with hands and arms, climb or balance, stoop, kneel, bend, talk and hear. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Work will take place in an office and warehouse environment. Employee may be required to work weekends, holidays and be on-call on occasion. The employee may encounter controlled air conditions with frequent air changes, environmental exposure. These are considered essential duties and are illustrative of those job tasks, which are fundamental. Employees may be required to perform additional related duties as may be assigned by management. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

**About the Role:** TAI is looking for a seasoned API 653 Inspector to lead and manage large above-ground tank inspection projects. The ideal candidate will have at least 10 years of experience, with a proven track record of supervising teams, overseeing all project phases from start to finish, and serving as a key point of contact for major clients in the chemical and power generation industries. If you are a self-motivated leader with a knack for problem-solving and a desire to make a significant impact, we offer a challenging role with the opportunity to take ownership of high-profile projects. Join our team and play a critical part in ensuring the safety and integrity of essential infrastructure. **About TAI:** TAI has been a leading multidisciplinary firm for over 35 years, providing expert engineering, management, and technical services to industrial, manufacturing, commercial, and mission critical markets. With over 300 skilled professionals, 16 different divisions, and 6 offices across the US, TAI offers sole-source solutions for complex projects, built on long-term client partnerships and a culture that attracts top talent. Team members at TAI are capable, well-rounded, flexible, and optimistic. We have found that the best employees are the ones who recognize the importance of what they do and the ones who let that guide them in the actions they take. More than any skill, we seek people who make decisions that support the common good. We work for our clients, and we work for one another. **Here's a glimpse into your day to day:** + Provide project management support on Large Above ground Tank Inspection projects, and as needed for other inspection projects. + Ensure project deliverables meet TAI and client expectations + Manage all phases of a project - setup, execution, and closeout + Develop and maintain project schedules and budgets. + Provide a single point of contact between TAI and client - getting info from client to carry out successful inspection project, providing the client with necessary information and resolving most project issues with the client. + Prepare initial budget, tracking overall costs, approving pending invoices, and pursuing change orders as required. + Perform overall project quality control. + Visit field to scope out projects. + Support proposal development by assisting with scope development, cost estimating and execution plan coordination. + Experience and knowledge of Magnetic Flux Leakage Technology (MFL). + Experience and knowledge of floating roofs and seal inspections. + Meet with clients to provide recommendations on the repair/ replacement/alteration of plant equipment as required for safe operation. + Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. + Conduct daily safety risk assessments on routine and non-routine job tasks. + Scheduling activities related to inspection. + Prepare isometric drawings and field sketches of piping for pipe inspections + Review and interpret P&ID's + Writes detailed inspection reports and maintains documentation of inspection activities. + Identifies circumstances that necessitate the use of proper safety procedures and equipment. + Communicate with clients and other parties in such a manner as to benefit the professional reputation of the company. **You'll be a perfect fit if you have:** + High School Diploma, some college coursework preferred. + API 653 Certification. + Have a minimum of 10 years' experience working as an API Inspector within related industry + At least 5 years' experience managing large Above Ground Tank Inspection projects. + Prior experience supervising a project team + Self-motivated individual with the ability to work independently and oversee large projects. + Experienced with using Magnetic Flux Leakage Technology (MFL) + Demonstrated ability to perform complete inspection reports for equipment or piping. + Inspection: Know the significance of what is observed and recognize the potential significance of what cannot be observed. Critical-minded and curiosity as to conditions and findings. + Documentation: Clarity, comprehensiveness, and professional presentation of reports. + High reach operation ability. + Demonstrated leadership, interpersonal and communication skills. + Travel: Will travel up to 50% out of town. _Physical Requirements:_ + Capacity to perform physically demanding work: Climbing, pipe rack walking, tight-spot body positioning/maneuvering. + Must be able to remain in a stationary position as necessary to complete assigned tasks. + The person in this position needs to frequently move about client's facilities and offices to access equipment and complete tasks. + Consistently ascend and descend portable and fixed ladders, scaffolding and other equipment used to reach equipment at various levels of height some of which maybe in excess of 25 feet in a safe manner. + Must be able to ascend and descend a large quantity of stairways at any given time. + Frequently move tools and equipment weighing up to 50lbs across client facilities as needed to complete tasks. + Occasionally lift and move equipment in excess of 100lbs in a safe manner. + Must be able to work in outdoor weather conditions as needed. **Compensation and Benefits:** + Pay: $55-65/hour (based upon experience) + Annual Profit Sharing Bonus (variable) + PTO and Paid Holidays + Health Benefits: Employee through family level coverage for medical, dental, and vision insurances. Company funded life and long-term disability insurances. Short Term Disability, FSA, HSA, EAP, and supplemental life insurances (employee - family) are also available! + 401(k)with employer match **Other Offerings:** + The opportunity to make a real impact on a variety of industry-leading projects. + The ability to balance your work and family activities. + Flexible work schedule + Work in a dynamic and collaborative environment that values creativity and innovation. + A chance to learn and grow alongside some of the brightest minds in engineering. + Professional Development, Tuition Reimbursement, and Association Membership Reimbursements. Discover what makes TAI a top-20 manufacturing partner, according to Engineering News-Record (ENR), and one of the top-50 fastest-growing private companies in the Baltimore Business Journal. Learn more about us at *********************** TAI provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

$19.87-$27.99 Per Hour Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the world's largest bottler for retailers and A-brands. Our products are distributed worldwide from our production sites in Europe and North America. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Position Detail: LAB TECH: * Perform required tests in SPC data system at the standard frequency including CO2, brix, TA, air, codes, dew point, taste, odor, appearance, contents, sodium, etc. * Perform control drinks test as needed. * Perform can seam check at required frequency. * Perform weekly full round net content of filler. * Perform product changeovers at filler. * Valve troubleshooting and rebuilding. * Assist, train and mentor other lab techs with operational problems such as syrup issues, lab testing, CIP, micros, filler changeovers to improve effectiveness. * Assist as needed in production report filing, updating formulas, vendor information or any other lab related documents. * Verify and oversee water room testing and PM work as needed to insure compliance. * Verify that all production schedules are current and communicated to all depts. * Be SQF ready at all times by completing tours and following up on any issues. * Assist QA Manager and or Supervisor as needed. * Maintain communication with production regarding schedules and changes, syrup batch issues, etc. * Correct batch as needed according to the control drink results. * Ensure syrup tanks and High Shear mixer are CIP and have been verified clean by performing Taste, Odor, and Appearance testing. * Ensure every tank has been 7-stepped CIP at least once per week and before batching sensitive products. Maintain use of Chart Recorder. * Ensure that empty bags and containers are properly discarded of. * Follow all GMP guidelines at all times. * Keep work area clean and organized, keeping overhead door closed when not bringing in materials. * Ensure caps, gaskets, clamps, etc are kept clean and dry. * Ensure tanks are capped off and doors are closed after CIP. * Back up for this position is another trained lab tech. * Must have an understanding of SQF, responsible for Food, Safety/Food Quality and to notify a person with the authority to take action for any Food Safety or Food Quality issue. * BATCHER TECHNICIAN: * Responsible for accurately following batch instruction sheets, dispensing and weighing dry ingredient weight and lot numbers. * Batch syrup using correct formulation and mixing instructions. * Physically lift ingredient bags up to 50 lbs and manually open 1 to 5 gallon pails and jugs. * Must have computer skills for requesting bulk ingredients through HMI (Human Machine Interface). * Operate cleaning in place (CIP) system and use transfer cleaning chemicals. * Review daily production schedules to coordinate what product to run. * Maintain the cleanliness of the batching and sugar rooms. * Ensure all Safety Standard (Company or Regulatory) are met at all times. * Ensure all Company Good Manufacturing Standards are met at all times. Working Conditions: Will work regularly around moving mechanical parts and equipment. Plant is very clean & is a safe environment. Regularly exposed to wet floors, humid conditions, cold conditions, and caustic chemicals. Noise level requires hearing protection. Will occasionally lift up to 75 pounds during shift. Will regularly be required to walk stand, use of hands and fingers, handle objects, tools, controls, reach with hands and arms, talk and hear. Employee will occasionally be required to sit, climb and or balance, stoop, kneel, crouch, crawl and smell., taste Vision requirements are close, distance, color, peripheral, depth and ability to adjust focus. Position Requirements: * Soft drinks experience preferred. * High school standard of education. * BS/BA in a scientific field, preferably Microbiology, with at least 1 college level course in Microbiology. * Understanding of GMP and Lab Safety, Standard Methods and processes. A Career with Refresco Refresco offers a competitive salary and comprehensive benefits, which include: * Medical/dental/vision insurance * Life insurance * 401(k) savings plan with company match * Paid holidays and vacation * Well-being benefits * Discount programs Join Refresco TODAY and enjoy a rewarding CAREER! Equal Opportunity Employer Refresco is an Equal Employment Opportunity/Affirmative Action employer. Refresco does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran status, status in uniformed services, sexual orientation, gender identity, gender expression, marital status, genetic information, or any other status protected by law. Criteria Behaviors Detail Oriented: Capable of carrying out a given task with all details necessary to get the task done well Team Player: Works well as a member of a group Dedicated: Devoted to a task or purpose with loyalty or integrity

Job Description The Quality Technician's role will be seen as pivotal in our efforts to drive at-source quality at ALMAG. The role requires the individual to support new product introduction, provide quality training, support, and to work collaboratively with various teams to develop standard work and ensure compliance. DUTIES AND RESPONSIBILITIES The quality technician's primary responsibility is to positively support the various departments in assuring that the requirements of the customer and quality management system are being met throughout each department. Additionally, the quality technician contributes to the continuous improvement of Almag's quality system. The duties and responsibilities of the Quality Technician are detailed below, but not limited to the following: Supporting the New Product Introduction process by assuring new customer requirements are understood and achieved. Responsible for performing audits of various departments to ensure that the QMS requirements are being met. Communicate new product status, its performance based on data, and provide samples and feedback to the respective departments with continuous improvement approach in mind. Responsible for collecting samples as required for various customer and internal requirements. Responsible for tracking and supporting Quality Containment processes for nonconforming product in all departments. Responsible for supporting production team in achieving customer requirements through training, auditing, and development of standard documents. Provide direction and support to any special sorting if needed, with the focus on accuracy and efficiency of sorting. Perform product testing for mechanical properties. Support team lead and shift supervisors to determine criteria for acceptance or rejection when there is uncertainty. Provide direction to the team if clarification is required for WO notes or requirements. Perform other related duties as assigned. Requirements MINIMUM QUALIFICATIONS Education/Experience At least 3 years' experience in quality, working in manufacturing environment. ASQ Certified Quality Technician (CQT) would be an asset. Certified Internal Auditor would be an asset. Technical Skills/Competence Excellent teamwork and collaboration across departments and within teams Work Efficiently Flexibility/Adaptability to meet customer business requirements. Communicate clearly and effectively, verbally and in writing. Must be able to read and understand engineering drawings. Basic knowledge of GD&T would be an asset. Ability to work and make decisions independently. Good mechanical aptitude and attention detail. Must be competent in the use of measuring instruments i.e. Calipers, micrometers. Basic proficiency with MS-office (Excel, Word, PowerPoint). Fork Lift Certified Benefits Profit Sharing Education Assistance Program Social Events Safety Shoe and Glasses Allowance Internal Growth and Development Health and Dental Life and AD&D Vision Critical Illness Insurance Long Term Disability

Job Details Warminster, PA Full Time DaylightDescription Quality Technician Penn United Technologies, Inc. has an immediate need for full-time Quality Technician to join our Plastic Injection Mold team at our Warminster, PA location. As a Quality Technician, you would be responsible for working with various manufacturing teams to achieve quality production and work to continually improve manufacturing processes to help ensure customer satisfaction. About Us: Penn United, a leading advanced contract manufacturer since 1971, provides the highest quality precision manufactured solutions for our customers' complex needs. Our broad range of manufacturing services support a variety of industries including medical, defense and aerospace, connectivity, energy, fluid handling, and precision components for consumer goods. Through our diverse range of capabilities which includes Plastic Injection Molding, Engineering, Precision Machining/Grinding, Stamping, Carbide Manufacturing, Additive Manufacturing and more, our work plays a vital role in products used around the world every day. Penn United Technologies currently employs over 650 people across all divisions of our employee-owned precision manufacturing company. Our Plastic Injection Molding team is located in Warminster, PA approximately an hour north of Philadelphia. Responsibilities: Work with manufacturing technicians to achieve acceptable product, meet or exceed customer quality standards, goals and deliveries Perform inspections and audits of materials and audit manufacturing processes Utilize inspection tools such as micrometers, indicators, digital height gage and comparators as needed Identify and report discrepancies with standard, placing all nonconforming product on hold Create, maintain and file inspection logs and quality documents Audit manufacturing technician inspection logs and SPC charts, verifying with product samples Assist with or perform First Articles, Gage R&R and Capability Studies, etc. Assist in training quality and manufacturing team to follow inspection procedures and in the use of inspection equipment Maintain clean equipment and work area Qualifications Qualifications: Knowledge and Skills Understanding of blueprint reading and inspection techniques High degree of accuracy, attention to details and deadlines Strong reading, comprehension, math and problem-solving skills Capable of completing application training on: - Statistics/Statistical Process Control - Measurement/inspection equipment - Technical Math - Geometric Dimensioning and Tolerancing (dependent on job assignment) Visual acuity (20/20 vision or corrective lenses) Basic computer literacy, including Microsoft Office Suite Able to work well independently and cooperatively with teams Excellent organizational skills, self-motivated, able to effectively manage multiple tasks Strong ability to professional communicate using verbal and written skills Candidates must be able to work daylight shift, lift up to 40 lbs., and stand 8-10 hours per day Education/Experience Required: High school diploma or equivalent Desired: Experience with Smart Scopes and Quest machines What we offer you: We offer an array of excellent benefits that reflect our commitment to the health and financial well-being of our employee-owners including: COMPETITIVE STARTING WAGE WITH THE OPPORTUNITY FOR TWO PAY INCREASES IN THE FIRST YEAR HEALTH BENEFITS Medical, dental, vision, Rx insurance that starts the first day Flexible Spending Account (FSA) Employee Assistance Program (EAP) Hearing Aid Coverage RETIREMENT ESOP: 5% Company paid contribution to our Employee Stock Ownership Plan 401K: 3% Company paid contribution 401K: 50% Company paid match up to the first 6% you contribute MONTHLY PROFIT-SHARING PROGRAM WORK / LIFE BALANCE - Paid Time Away from Work 15 Days Paid Time Off (PTO) your first year 9 Paid Holidays OTHER INSURANCE COVERAGE Group Term Life Short Term Disability (after 90 days) Long Term Disability (after 6 months) Voluntary Benefit package ADDITIONAL BENEFITS Tuition Reimbursement Safety Equipment (PPE) Reimbursement Years of Service Awards Equal Opportunity Employer /Veterans/Disability

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking a dedicated Quality Control Inspector to join our fast-paced, dedicated, and extremely talented team. Candidates should bring in a high level of excitement and punctuality. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday Responsibilities: Inspect - Conduct routine and non-routine inspection of materials at incoming, in-process, and final. First Article Inspection when required by the customer or quality management. Inspect - Perform tests, interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data/material for release. Calibration - Maintain inspection equipment in accordance with Amuneal's internal procedures and any relevant customer specifications. Document - Ensure drawings, work instructions, and procedures are maintained to current revision and accessible. Audit - Perform routine internal audits of processes and persons, as directed by relevant management. Train - Provide training and guidance to junior members of the Quality team. This includes the provision of oversight, and implementation of disciplines when it is necessary, as well as reporting on progress, or lack thereof, to relevant management. Straighten: Arrange items that are needed so that they are ready & easy to use. Clearly identify locations for all items so that anyone can find them & return them once the task is completed. Shine: Clean the workplace & equipment on a regular basis to maintain standards & identify defects. Standardize: Revisit the first three of the 5S on a frequent basis to maintain standards & identify defects. Sustain: Keep the rules to maintain the standard and continue to improve every day. Qualifications: High School Diploma/ GED required. Associates Degree, Bachelors Degree, or Technical school preferred. Knowledge of ISO 9001 Ability to read and understand blueprints Technically apt, with experience using Microsoft Suites. Use of CMM/ FARO Arm Preferred. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

Bring precision, curiosity, and craftsmanship to a team that builds components trusted by the U.S. Navy. At Interstate Connecting Components (ICC), a division of Heilind Mil-Aero, we take pride in engineering excellence. As a Quality Control Inspector, you'll play a key role in ensuring that every part we ship meets the highest standards of performance and safety. If you have experience inspecting, measuring, or testing mechanical, electrical, or assembled products - or even a background in pharmaceutical or chemical manufacturing where precision is everything - this could be the perfect next step in your quality career. What You'll Do Perform inspection and testing of incoming materials and finished products using precision tools (calipers, micrometers, thread gauges, drop gauges, etc.). Interpret engineering drawings and verify that products meet specifications before they reach our customers. Serve as the liaison between Quality and Warehouse teams, ensuring materials flow seamlessly from receipt to shipment. Conduct and coordinate Customer Source Inspections when required. Support investigations of nonconforming materials and contribute to process improvements. Accurately document inspections and results in our ERP system (Inventory, Order Entry, Purchasing, and Production modules). Assist with continuous improvement projects, developing better inspection methods and tools. Why You'll Love Working Here Purpose-driven work: Your inspections directly impact mission-critical equipment used in military and aerospace applications. Skill development: Get hands-on exposure to diverse products and inspection techniques in a growing organization. Comprehensive benefits package including medical, dental, and vision coverage; 401(k) with company match; PTO and holidays; tuition reimbursement; wellness and pet insurance programs; and referral bonuses.

Manufacturing Quality Inspector BH Job ID: 3365 SF Job Req ID: 15972 Job Title: Manufacturing Quality Inspector Shift: 1st Shift Mon - Fri (7am - 330pm) About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are currently seeking a reliable and knowledgeable individual to join our Quality team. This role will be responsible for inspecting materials and products, providing quality support through knowledge of inspection procedures and tools, identify deviations, work with production team members to document non-conforming materials and communicate with engineering team within in a manufacturing facility. A Quality Inspector works with a team to ensure all products meet established quality standards. The ideal candidate is adaptable, a team player, a great communicator, and can meet deadlines and prioritize multiple projects. Responsibilities: * Perform inspection on in-house and vendor-supplied parts and complete in-process inspections as required. Ability to use ESDS materials when working with electronic materials (i.e. wrist straps, grounded rubber mats). Operate Positive Material Identification (PMI) Gun to check materials against blueprints or drawings. Use Keyence measurement programming and CMM operation experience * Interpret engineering drawings/specifications and geometric dimensioning and tolerancing (GD&T). Conduct process audits of assigned value streams focusing on adherence to standard work. Identify and document defects, deviations, or non-conforming items and processing defects. * Perform final product inspection/verification before shipment for customer orders. Identify and report defects or issues in the assembly process and necessary adjustments or repairs to ensure product quality. Partake in the occasional inspection of soldering workmanship and electronic assemblies Perform quality checks by established quality procedures and ISO requirements. * Collect samples of products or materials for testing and coordinate with the quality control laboratory if further analysis is required. Collaborate with team members to optimize workflow and achieve daily and monthly targets. Ensure inspection tools and equipment are properly calibrated and maintained and report issues. * Maintain accurate records of inspection results, quality control data, and non-conforming products. Generate reports and documentation as required * Inspect finished products for quality and adherence to specifications. Perform quality checks by established quality procedures and ISO requirements. Identify and report defects or issues in the assembly process and necessary adjustments or repairs to ensure product quality. Test and troubleshoot assemblies. * Participate in training programs to improve maintenance skills and product knowledge. Attend monthly EHS trainings. Follow all policies and procedures (i.e. report on time and ready to work - Start/Lunch/Breaks). Participate in continuous improvement initiatives by suggesting process enhancements and participating in root cause analysis, writing the NCM, and disposing of waste accordingly (RTV, Scrap, Rework) * Follow all safety guidelines, including wearing appropriate personal protective equipment (PPE). Test PSI limit no greater than 30,000. Report any safety hazards or incidents to supervisors promptly. Follow 5S principles (Sort, Set in order, Shine, Standardize, Sustain). Test PSI limit no greater than 30,000. Lift a maximum of 35 lbs for an individual and 70 lbs for a team lift. Maintain a clean and organized work area. Requirements: * High School Diploma or GED * 2+ years' experience in Manufacturing/Industrial Quality Inspection * 1+ years of experience in Using Precision measuring tools and blueprints Core Competencies: * Lifting: Must be able to lift up to 35 pounds occasionally with hoist to be used on objects over 40 pounds. * Standing: Standing is required in periods of up to three hours at a time. * Stooping: Would be required to lift objects off pallets * Hand Dexterity: Must be able to work with hand tools, screws and gauges, as well as operating buttons on controls. * Verbal Communication: Must be capable of clear communication between co-workers and supervisor. * Carrying: Capable of carrying 40 pounds for a distance of up to 25 feet. Preferences: * Ability to read and understand the bill of materials and work instructions, blueprints, or technical drawings * Ability to operate precision tools such as micrometers, calipers, thread gauges, comparators, and others * Demonstrated time management skills, strategic thinking, and adaptability * Proficient computer knowledge (i.e. log on credentials (SSO), JD Edwards, and Microsoft Outlook, Word and Excel) Travel & Work Arrangements/Requirements: This position will be based at our site in Ivyland, PA no travel. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond.

System One is seeking a Certified FARO/NDE Inspector for a long-term onsite contract role. The inspector will perform precision dimensional inspections using FARO systems and support shop floor inspection activities. Candidates with NDT certifications are strongly preferred. Key Responsibilities: + Perform dimensional inspections using FARO equipment + Support shop floor inspection tasks as needed + Interpret drawings and specifications for accuracy and conformity + Work closely with quality, production, and engineering teams + Accurately document inspection results and maintain required records Required Qualifications: + FARO inspection experience (required) + Any NDT certifications (VT, PT, MT, UT, etc.) are a plus + Ability to work 2nd or 3rd shift Additional Details: + Duration: Long-term contract + Pay: Please ask candidates for desired pay range + Screening: Level 3 background check + 10-panel drug & alcohol testing + Benefits: Eligible for System One billable employee benefits, including vacation & sick leave Ref: #161-Managed Staffing Charlotte System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.

Centinel Spine , LLC is the leading global medical device company exclusively focused on addressing cervical and lumbar spinal disease with prodisc , the most complete total disc replacement (TDR) technology platform in the world. The Company's prodisc technology is the most studied and clinically proven TDR system across the globe, validated by over 540 published papers and more than 300,000 implantations. Centinel Spine's prodisc is the only TDR technology with multiple motion-preserving anatomic solutions, allowing the surgeon to Match-the-Disc™ to each patient's anatomy for both cervical and lumbar total disc replacement. About the opportunity: If you are passionate about making a difference, we are looking for a Quality Control Inspector. The qualified candidate will be considered for full time employment upon successful completion of the 90-day training period. This role is responsible for performing inspection and testing of finished goods and raw materials and maintains inspection documentation. This position is on-site in West Chester, PA five (5) days a week and reports to the Quality Control Supervisor. Where you will make an impact: Responsible for performing inspection and testing including incoming inspection of finished goods and raw materials. Also responsible for maintaining inspection documentation, including scanning and filing completed records. Responsible for initiating non-conformance reports and ensuring non-conforming material is processed in accordance with the disposition. May assist with nonconformance investigations as needed. Responsible for maintaining a clear and organized QC inspection area, product is placed in bins and on racks. Assist in internal audits as requested. What you will bring: High School Diploma (or equivalent) required Associate's degree or technical certification preferred Proficient in navigating computer systems 1-3 years' experience in a regulated environment performing quality control inspections Experience reading and inspecting engineering drawings Strong written and oral communication skills Excellent attention to detail, communication and relationship building skills Collaborate well in a team environment and convey a positive attitude Where you will go: 100% West Chester office-based Work hours for training - Monday to Friday 8:00am - 4:30pm Work hours post training - Monday to Friday 9:00am - 5:30pm Note: The above job description describes the general nature and level of work being performed by employees assigned to this position. It is not intended to be construed as an all-inclusive list of all responsibilities, duties and skills required of all employees assigned to this position. Duties, responsibilities and activities may change at any time with or without notice. Centinel Spine is proud to be an equal opportunity employer.