Quality inspector jobs in Greenwich, CT

The Quality Inspector will complete visual inspection of printed card assemblies and sub-assemblies. They will review paperwork, complete computer entry, read and interpret drawings and documents. They will interface with production line and visiting customers. They will also work in clean room environments. Required Skills Good written and verbal communication skills. Problem solving and analytical skills a plus. Keen attention to detail. Basic computer and math skills to measure specifications. Ability to use measuring devices such as gauges, meters, calipers and computers. Experience with workmanship specifications JSTD-001 and IPC-610 certifications required MIL-STD 38534, MIL-STD 38535 preferred EOE/Disability/Veteran This position is onsite We offer a comprehensive benefit package including: Health Insurance, Dental and Vision, Life Insurance, Short and Long-Term Disability. Flexible spending option and 401K. We also offer paid time off including: Vacation, Sick and Paid Holidays

**Food Technologist - 2nd Shift** **Shift:** 4:00 PM - 1:00 AM (must be flexible to stay past 1:00 AM as needed) **Schedule:** Monday-Saturday (subject to change based on production demand) **Industry:** Frozen Food Manufacturing Book a time to discuss this opening immediately: ************************************************************************ **About the Company** We are a **family-owned and operated frozen food manufacturer** , specializing in the production of Jamaican Beef Patties. Our facility is located in Tappan, NY, and is experiencing rapid growth and expansion. We pride ourselves on maintaining high standards of food safety, quality, and operational excellence. **Position Summary** We are seeking a **Food Technologist** with a minimum of **3 years of experience in a USDA-regulated facility** to join our **2nd shift Quality Control team** . This role is critical in ensuring that our products meet stringent quality and safety standards through routine testing, documentation, and collaboration with production teams. **Key Responsibilities** + Enforce **HACCP** , **GMPs** , and **Safety Standards** across the facility. + Conduct **pre-operational, operational, and post-operational checks** . + Perform **routine facility walkthroughs** and communicate findings to the QC Manager. + Participate in **internal and third-party audits** . + Review and verify **daily food safety and quality control records** . + Maintain and improve **SOPs** , **SSOPs** , and **prerequisite programs** . + Oversee sanitation tasks per the **Master Sanitation Schedule** . + Supervise **line checkers and QC assistants** to ensure timely and accurate testing. + Monitor **supplier performance** , conduct **ATP and allergen control testing** . + Review **labels and raw materials** for compliance. + Investigate and resolve **customer complaints** . + Maintain accurate documentation and ensure calibration of testing instruments. + Assist in **mock recalls** , special projects, and employee training. **Qualifications & Requirements** + Bachelor's Degree in **Food Technology** , **Food Science** , or related field preferred. + Minimum **3 years of experience** in a USDA-regulated food manufacturing environment. + Strong knowledge of **SQF** , **GMPs** , **HACCP** , **SOPs** , **SSOPs** , **USDA/FDA regulations** , and **Pest Control Programs** . + Proficiency in **Microsoft Word** , **Excel** , and **data entry software** . + Excellent **communication** , **documentation** , and **customer service skills** . + Ability to work flexible hours and adapt to production demands. **Work Environment & Team Structure** + You'll report to **Raquel and Sandra** , QC leads on the 2nd shift. + The QC team includes a **QC Director** , **QC Manager** , **QC Technicians** , and **Line Checkers** . + Dress code: **Clean non-slip shoes** , **jeans or khakis** , and a **company-provided lab coat** . + Fast-paced, collaborative environment with a strong focus on food safety and quality. **Employee Value Proposition** + Opportunity to grow with a **rapidly expanding company** . + Competitive benefits including **Medical, Dental, Vision, and 401(k)** . + Be part of a team that values **quality, integrity, and innovation** . **Job Type & Location** This is a Contract to Hire position based out of TAPPAN, NY. **Pay and Benefits** The pay range for this position is $31.25 - $36.06/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in TAPPAN,NY. **Application Deadline** This position is anticipated to close on Dec 19, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Hamilton Connections is seeking candidates for a quality control inspector operating at a manufacturing company in Danbury, CT. The quality control inspector is responsible for testing, evaluating and documenting the quality of manufactured products. The hours are 3:30 p.m.-12 a.m., Monday-Friday. The job pays $28-$32 an hour, depending on experience. Job Responsibilities: Perform first piece, final and first article inspections of products to inspect for damage and/or defects Use measuring tools like calipers, micrometers and gages to inspect products Measure products for accuracy according to blueprint specifications Maintain accurate documentation and reporting Other duties as assigned Job Requirements: 5 or more years of quality control experience, including first piece, final and first article inspections Experience with precision measuring instruments, including calipers, micrometers, height gages, plug gages and thread gages Able to read blueprints Coordinate Measuring Machines (CMM), vision system and/or optical comparator experience Geometric Dimensioning and Tolerancing (GD&T) experience Familiar with ISO procedures a plus Organized, responsible and self-driven High school diploma or equivalent Able to pass pre-employment screenings

Full-time Description A Quality Control Technician II is responsible for ensuring that products and services meet the established standards set by the company. Duties include maintaining strong overall quality control of products made by the company adhering to reliability, performance, and customer expectation. Performs incoming inspections of raw materials, customer supplied raw materials, returned goods and special components. Performs finished good inspections. Performs start-up and in process inspections. Monitors specific areas of production as directed by the Quality Control Supervisor. Makes measurements and records data as per inspection forms or job cards. Performs testing and records data for statistical process control (SPC) during manufacturing, (when required). Communicates with Quality Control Supervisor any occurrences of non-conforming product, out of control process or any other items of concern. Communicates with Manufacturing Engineers any occurrences of tests failing engineering limits or any other items of concern. Performs computer set up for label printing programs on cutting lines. Assists Engineering as needed for experimental testing. Enters finished goods inspection data into BMS as appropriate. Any other duties as assigned by supervisor. Requirements Excellent organizational skills and attention to detail. Must have good documentation practice. A proven understanding of part workmanship. Ability to handle numbers required. Strong interpersonal skills. Ability to use micrometer, computers, testing equipment and electronic balance is essential. Experience using Excel is preferred. Ability to speak, read, and write in English. Education & Experience High school diploma or equivalent. Working Conditions While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes, or airborne particles. The noise level in the work environment is usually moderate. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job, e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc. Ability to lift items weighing up to 15 lbs. Pay: $22.00-$24.00/hour Benefits: Eligible after 1st day: Paid holidays Employee Assistance Program Eligible after 90-day probation period: Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account Vacation time Sick time Eligible after 1 year of service: 401(k) with Employer Match Potential for discretionary bonus The final pay offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We're proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don't discriminate based on an individual's race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at **********************.

Principal Responsibilities Capable of reading and understanding complex drawings. Ability to use a variety of complex inspection gages and equipment. Performs visual and dimensional inspection of various mechanical components and assemblies to close tolerances. Identifies defects in surface, dimensional, visual and non-conformities (material, documentation and workmanship) to blue prints and Heim quality standards. Reports non-conformance of materials or unusual conditions to Quality management. Familiarity with Quality System(s) - ISO 9001, AS9100, etc. Coordinates and performs inspection processes and accepts product as a Designated Supplier Quality Representative for customers. Interacts with customers during source inspection. Completes paperwork. Reviews and interprets customer specifications. Maintains and updates delegation/regulatory documentation. Verifies material and process certifications for compliance with customer/regulatory requirements. Passes customer required Delegation Program Tests to achieve and maintain delegation approval. Inspects and accepts product under the FAA: PMA/TSO program as a Designated Manufacturing Inspection Representative. Prepares and signs FAA Airworthiness Approval Tags. Initiates and completes Fist Article Inspection Reports and other relevant quality reports. Maintains records, data and logs as necessary. Investigates and analyzes Quality issues and brings departments together to resolve problems. Provides written documentation and reports. Follows work procedures. Provides support to achieve short-term and long-term department / company goals. Provides leadership/training as needed. Ensures that production schedules and customer requirements are met. Maintains clean and safe work environment. Follows safety and environmental procedures and regulations. Reports safety incidents to supervisor. Makes recommendations for improvements to work processes and procedures. Contributes to 6 S programs in work area. Provides a high level of service to all internal and external customers. Contributes to positive teamwork environment. Performs other duties as assigned. Participates in training/learning other positions. Accomplishes related results as needed. Qualifications An AS degree in Industrial Technology or equivalent work experience of 6-8 years in a manufacturing environment, preferably in an aerospace manufacturing environment. “A” level Inspector or equivalent experience is required or any combination of knowledge, skill and experience to the satisfaction of the manager. Knowledge, Skills and Abilities Analytical Thinking Attention to Detail, thoroughness and accuracy Blueprint Reading Inspection Mechanical Ability Measurement and Test Equipment Communication (Speaking, Questioning, Listening) Computer (Word, Excel, Access) Customer focus Decision Making Dependability Initiative Interpreting Customer Requirements Organization Problem Solving Results Oriented Team Oriented Writing, documentation Knowledge Essential to the Position Customer requirements Inspection Techniques - Read and Interpret specifications Other: Travel: 25% Requires Certificates / Licenses: Customer Requirements / Quality Delegation Programs FAA

Immediate opening is available for full-time Mechanical Inspectors, 1st Class and 2nd Class for Production and Final Quality Inspection in Farmingdale. NY. Responsibilities include monitoring, measuring, and documenting the characteristics of products as compared to product requirements and prevent non-conforming product. This position will work with machined and fabricated metal products at various stages in our manufacturing processes including final Quality Inspection. We are seeking individuals with excellent interpersonal skills and operational expertise to join our production team. Essential Duties and Responsibilities include the following: - Monitor and measure the characteristics of products at appropriate stages of product realization. - Document and analyze the conformity of product to required specifications - Cooperate with manufacturing to prevent non-conforming product and continuously improve processes. Supervisory Responsibilities: This job has no supervisory responsibilities. Balances team and individual responsibilities; Gives and welcomes feedback; Puts success of team above own interests. - Written Communication - Excellent command of the written English language; Writes clearly and informatively; Varies writing style to meet needs; comprehends and applies proper email etiquette; presents numerical data effectively; able to read and interpret complex written information (customer specification manuals, contracts, etc). - Problem Solving -- identifies and resolves problems in a timely manner; gathers and analyzes information and data skillfully; develops alternative solutions; works well in group problem solving situations. Requirements Education and/or Experience: A high school diploma or equivalent. The preferred candidate will have: - Experience with Measuring and Testing Equipment including CMM equipment. - Ability to read and interpret part drawings, product specifications, and other related documentation. Must understand Geometric Dimensioning and Tolerances (GD&T) to product inspection Qualifications / Requirements: - Must be a detail-oriented, communicator, able to prioritize tasks and able to work under pressure with multiple deadlines. - Must be able to use all standard measuring instruments and CMM equipment. - While performing the duties of this Job, the employee is regularly required to sit; use hands to type, handle and feel. Employees must be able to communicate effectively through talking and listening. The employee is occasionally required to stand; walk, and reach, lift and carry objects weighing up to 25 lbs with hands and arms.

General Purpose The Incoming Inspector is responsible for the inspection and verification of incoming raw materials, components, and outsourced parts used in HYTORC's electric and hydraulic tools. This role ensures that all incoming products meet the required specifications, quality standards, and documentation requirements . The Incoming Inspector will work closely with suppliers, purchasing, and quality teams to resolve quality issues and maintain compliance with industry standards. Essential Duties and Responsibilities * Inspect and verify incoming raw materials, machined components, and subassemblies for compliance with engineering drawings, specifications, and quality requirements. * Perform dimensional inspections using precision measurement instruments (calipers, micrometers, height gauges, bore gauges, Comparators, CMM). * Verify material certifications, supplier documentation, and compliance with required standards. * Record and maintain inspection results, nonconformance reports, and supplier performance data. * Work closely with Quality Control, Purchasing, and Engineering to address discrepancies or nonconforming materials. * Segregate and label nonconforming materials, coordinating with purchasing for supplier returns or corrective actions. * Control of MRB and quality hold areas. * Follow and support ISO 9001:2015 quality management processes. * Ensure inspection tools and gauges are calibrated and in good working condition. * Maintain a clean, organized, and safe work area in accordance with company policies. Supervisory Responsibilities None Education/Experience Required * Minimum 2-4 years of experience in a quality control or inspection role. * Experience in the inspection of mechanical components and assemblies, preferably for industrial tools or related equipment. * High School Diploma or equivalent required. * Technical or trade school training in mechanical inspection, or a related field is preferred. * Ability to read and interpret engineering drawings, blueprints, and GD&T specifications. * Proficient in the use of precision measuring instruments and inspection equipment. * Understanding of material certification requirements and industry quality standards. * Experience with CMM operation and basic programming a plus. * Strong attention to detail and accuracy in record-keeping. * Familiarity with ISO 9001:2015 quality systems preferred. Computer Skills Necessary * Microsoft Office * Experience with CMM software (e.g., Wenzel, Mitutoyo, Zeiss, or equivalent). Physical Demands/Requirements * Ability to stand for extended periods during inspections. * Ability to lift up to 50lbs. occasionally.

Job Description General Purpose The Incoming Inspector is responsible for the inspection and verification of incoming raw materials, components, and outsourced parts used in HYTORC's electric and hydraulic tools. This role ensures that all incoming products meet the required specifications, quality standards, and documentation requirements . The Incoming Inspector will work closely with suppliers, purchasing, and quality teams to resolve quality issues and maintain compliance with industry standards. Essential Duties and Responsibilities Inspect and verify incoming raw materials, machined components, and subassemblies for compliance with engineering drawings, specifications, and quality requirements. Perform dimensional inspections using precision measurement instruments (calipers, micrometers, height gauges, bore gauges, Comparators, CMM). Verify material certifications, supplier documentation, and compliance with required standards. Record and maintain inspection results, nonconformance reports, and supplier performance data. Work closely with Quality Control, Purchasing, and Engineering to address discrepancies or nonconforming materials. Segregate and label nonconforming materials, coordinating with purchasing for supplier returns or corrective actions. Control of MRB and quality hold areas. Follow and support ISO 9001:2015 quality management processes. Ensure inspection tools and gauges are calibrated and in good working condition. Maintain a clean, organized, and safe work area in accordance with company policies. Supervisory Responsibilities None Education/Experience Required Minimum 2-4 years of experience in a quality control or inspection role. Experience in the inspection of mechanical components and assemblies, preferably for industrial tools or related equipment. High School Diploma or equivalent required. Technical or trade school training in mechanical inspection, or a related field is preferred. Ability to read and interpret engineering drawings, blueprints, and GD&T specifications. Proficient in the use of precision measuring instruments and inspection equipment. Understanding of material certification requirements and industry quality standards. Experience with CMM operation and basic programming a plus. Strong attention to detail and accuracy in record-keeping. Familiarity with ISO 9001:2015 quality systems preferred. Computer Skills Necessary Microsoft Office Experience with CMM software (e.g., Wenzel, Mitutoyo, Zeiss, or equivalent). Physical Demands/Requirements Ability to stand for extended periods during inspections. Ability to lift up to 50lbs. occasionally.

The Quality INSEPCTOR position will be responsible for inspection of all incoming raw materials and finished products. Tasks will require use of calipers, micrometers, gauges, optical comparator, drawing comparisons and other inspection tools - candidate MUST have experience with relevant equiptment. Report, analyze and trend quality data (i.e. non-conforming material and inspection results). Work directly with suppliers to address quality concerns and assess performance. Responsible for specific quality programs as assigned, other related responsibilities as follows: Ensures company standard practices and cGMP procedures are followed. Issue Batch Records to production and Finished Good inspection records to Operations Maintains SOP binders and updates such through approved Change Controls. Participate in internal and external audit process Inspect and evaluate all incoming components and labeling Inspection and testing of finished goods Authorize release of Quarantined components for production use Responsible for calibration schedules for testing and production equipment PROVIDE SALARY HISTORY TO BE CONSIDERED Qualifications Relevant quality experience along with cGMP and 2 years experience preferred. Experience with FDA compliance regulations a plus Additional Information To be considered you MUST provide the following: Current resume Full Salary History Salary & Benefits : Salary will be based on experience Medical Benefits package available Schedule - F/T Monday to Friday 7:30 to 4:00 pm PLEASE NO RECRUITERS OR SOLICITATIONS! All your information will be kept confidential according to EEO guidelines.

Open Scientific provides contract staffing and direct hire recruitment services for the scientific, engineering, laboratory and manufacturing sectors. Job Description Quality Inspector A large labeling company is looking for Quality Inspectors. The labeling company works with large companies nationwide to provide labels for their products. The Quality Inspectors ensure the overall excellence of products or goods manufactured. They are the “last line of defense” to ensure the product is in excellent condition for the customers. Successful people in this role has great attention to detail. This is perfect for someone looking for long term work and growth. Requirements: · 1 - 2 years' experience in related field · Knowledge of FDA/cGMP guidelines · Basic writing and math skills · Strong verbal communication skills · Fluent in English, Spanish a plus · Must be able to stand on feet all day Location: Hauppauge Pay Rate: $12-$15 per hour 1st and 2nd shift available Benefits: Sick days, Vacation, 401k, Medical, Dental and much more Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description LNK International, Inc. is one of the nation's largest manufacturers of solid and liquid dose, over the counter (OTC) pharmaceuticals. For over 40 years, we have built a reputation for delivering the highest quality products, outstanding service and product innovation. What sets LNK apart? We believe it is our employees. There is a commitment to quality in every department at LNK. As a member of our Accounting department you will be working with dedicated professionals who support and interact with all areas of the company. Our full time employees enjoy competitive benefits including: 401(k) with generous employer match Health Insurance Dental Insurance Paid holidays Paid vacation Responsibilities: Responsibilities include but are not limited to checking the overall quality of the manufacturing and/or packaging operations. Perform all line releases, product quality checks and batch record/work order review. Supports production activities related to the timely production of finished goods. Performs line releases and product quality checks including batch record/work order review for QA release. Assists in the validation/qualification of batches, including sampling. Ensure that any required sampling is performed and samples are submitted to laboratory. Maintain records and organize documents to support packaging/manufacturing operations in an efficient manner. Assist when needed for any pertinent investigations involving respective areas. Monitor warehousing and staging areas to ensure materials are being received/shipped/maintained within cGMP and SOP Guidelines. Report building maintenance issues to ensure compliance with AIB, HACCP, cGMP regulations and pertinent SOP's and report them to the QA Supervisor. Assist in the monitoring and maintenance of the Pest control, calibration and temperature monitoring programs. All other duties as assigned Education and Experience: HS Diploma At least one year of directly related experience. Work Environment: In person. There is no remote option for this role. Overtime may be required from time to time. The salary listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining a team member's base salary and/or rate, several factors may be considered as permitted by law. LNK provides equal employment opportunities to all applicants and prohibits discrimination of any type on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information or any other characteristic protected by applicable federal, state or local laws. Job Posted by ApplicantPro

Job Description Principal Responsibilities Capable of reading and understanding complex drawings. Ability to use a variety of complex inspection gages and equipment. Performs visual and dimensional inspection of various mechanical components and assemblies to close tolerances. Identifies defects in surface, dimensional, visual and non-conformities (material, documentation and workmanship) to blue prints and Heim quality standards. Reports non-conformance of materials or unusual conditions to Quality management. Familiarity with Quality System(s) - ISO 9001, AS9100, etc. Coordinates and performs inspection processes and accepts product as a Designated Supplier Quality Representative for customers. Interacts with customers during source inspection. Completes paperwork. Reviews and interprets customer specifications. Maintains and updates delegation/regulatory documentation. Verifies material and process certifications for compliance with customer/regulatory requirements. Passes customer required Delegation Program Tests to achieve and maintain delegation approval. Inspects and accepts product under the FAA: PMA/TSO program as a Designated Manufacturing Inspection Representative. Prepares and signs FAA Airworthiness Approval Tags. Initiates and completes Fist Article Inspection Reports and other relevant quality reports. Maintains records, data and logs as necessary. Investigates and analyzes Quality issues and brings departments together to resolve problems. Provides written documentation and reports. Follows work procedures. Provides support to achieve short-term and long-term department / company goals. Provides leadership/training as needed. Ensures that production schedules and customer requirements are met. Maintains clean and safe work environment. Follows safety and environmental procedures and regulations. Reports safety incidents to supervisor. Makes recommendations for improvements to work processes and procedures. Contributes to 6 S programs in work area. Provides a high level of service to all internal and external customers. Contributes to positive teamwork environment. Performs other duties as assigned. Participates in training/learning other positions. Accomplishes related results as needed. Qualifications An AS degree in Industrial Technology or equivalent work experience of 6-8 years in a manufacturing environment, preferably in an aerospace manufacturing environment. “A” level Inspector or equivalent experience is required or any combination of knowledge, skill and experience to the satisfaction of the manager. Knowledge, Skills and Abilities Analytical Thinking Attention to Detail, thoroughness and accuracy Blueprint Reading Inspection Mechanical Ability Measurement and Test Equipment Communication (Speaking, Questioning, Listening) Computer (Word, Excel, Access) Customer focus Decision Making Dependability Initiative Interpreting Customer Requirements Organization Problem Solving Results Oriented Team Oriented Writing, documentation Knowledge Essential to the Position Customer requirements Inspection Techniques - Read and Interpret specifications Other: Travel: 25% Requires Certificates / Licenses: Customer Requirements / Quality Delegation Programs FAA

GSE Dynamics, Inc., a full-service engineering and manufacturing company located in Hauppauge, NY, is seeking an experienced Mechanical Quality Control Inspector. Duties include: Read blueprints and instructions for quality expectations for products and supplies Inspection of raw materials to quality standards Inspections including First article using appropriate methods including measuring dimensions, testing functionality, reviewing specifications, etc. Use of various systems to perform complex testing procedures Maintain records of testing, information and various metrics. Monitor the use of equipment to ensure it is safe and well-maintained. Prepare and submit reports to quality management Qualifications: Knowledge of Aerospace Manufacturing is required including processing and fabrication methods. Minimum 3 years experience in manufacturing quality control inspections. Ability to read and understand blueprints and instructions. Ability to work independently with hand measuring equipment including calipers and micrometers. Ability to do independent first piece inspection on sheet metal parts, machined parts and assemblies. Ability to lift heavy materials (up to 40 lbs.) Computer skills are a must. Experience working within an AS9100 quality environment is a plus. Working knowledge with CMM inspections Familiarity with composite materials is a plus. Requirements: U.S. Citizen High School Diploma or equivalent Salary Range: $24.00 per hour - $30.00 per hour This is an estimated salary range with any actual compensation offers to be dependent upon factors including experience, skill set, qualifications, and other factors allowed by law. Job Type: Full-time FLSA Classification: Non-exempt Benefits include: Paid Time Off, Medical Insurance, FSA (Flexible Spending Account), Dental Benefit, Aflac Supplemental Insurance, Life Insurance, 401k with company match. EOE / Veteran / Disability Please Contact: [email protected]

Performs inspection and monitoring of all incoming materials that require inspection, including but not limited to packaging, chemicals, subassemblies, mechanical and electrical components. They are inspected in accordance with FDA/GMP requirements and established company SOPs and specifications. Responsibilities Key Accountabilities: Inspects materials and products, for conformance to specifications, using fixed or preset measuring instruments and/or analysis of vendor supplied documentation Normally pursues a defined course of training to develop professional capabilities and skills in such areas as, but not limited to, GD&T (geometric dimensioning and tolerancing), FDA/GMP and SOPs Ensures materials and products are in accordance with established tolerance levels for quality and performance and are not irregular or damaged. Relies on instructions and pre-established guidelines to perform the functions of the job. Works either under a supervision or higher-level inspector Primary job functions do not typically require exercising independent judgment Inspects of all incoming materials or chemicals Collects data and subsequent disposition of goods in SAP Placement of Bar Code labels on all in-coming material and the use of Bar Code Reader Reading and understanding of drawings or blueprints Maintains good general housekeeping in warehouse and inspection area At direction of Supervisor or Manager will perform special assignments as necessary All other duties as assigned by manager Internal Networking/Key Relationships: To be determined based on department needs Skills & Capabilities: Must have basic math skills and concepts. Qualifications Minimum Knowledge & Experience Required for the Position: High School diploma or equivalent, with a minimum of 2 years of experience in a manufacturing operations role. International Mobility Required: No Travel Requirements: No The hourly wage range Werfen reasonably expects to pay for the position is $22 to $25. Compensation is reasonably based upon multiple factors including education, relevant experience, skillset, knowledge, and specific needs of the business.

Description & Requirements Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Starting Rate: $21.21 GENERAL PURPOSE: Inspect, at various stages of production, printed material/cartons to ensure they meet both the customer's and MPS's quality and production standards. Essential Job Functions * Records and maintains accurate in-process inspection records. * Inspects in-process material using statistical sampling plans. * Performs various testing methods including scanner challenge and scale count verification. * Visually inspects for printing, die cutting and gluing to established standards. * Inspects each pallet prior to shipping (accepting or putting on Q.C. Hold). * Ensures material placed on Q.C. Hold is properly documented and moved to the Hold Area. * Communicates with packers/feeders and mechanics to correct/sort, when defects are found during a production run. * Checks job bag for all standards and specifications required for that operation before beginning production. * Conducts line clearance and documents before starting production. * Establishes case counts for all new jobs and monitor to insure existing counts are correct. * Performs other job duties as assigned. Qualifications * Must have good communication skills and the ability to give directions when required. * Must have knowledge of GMPs and SOPs for Quality. * Must understand basic math and be able to use a calculator. * Must be able to read and write in English. * Must pass basic reading test. * Must pass ruler test. * Must pass color hue test. * Must be able to differentiate between acceptable and unacceptable material. * Must be able to maintain good attendance. * Must be willing to work overtime as needed; significant overtime may be required during busy periods. * Must be able to perform all essential functions of this job with or without reasonable accommodation. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Employee is required to: sit, stand, talk, see, and hear. The starting rate is $21.21 per hour, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 10 days of paid vacation, and 11 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ******************************** and the application window is expected to close by 11/9/2025. Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by state or federal law.

Job Description BASIC FUNCTIONS Mid-level position. Performs counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested. Ability to complete a full analysis on all EEE Devices within the Laboratory Ability to operate all test equipment within the Laboratory Department Identify nonconformity to provide data to Quality Manager. Ability to communicate, document and report all nonconformity within internal system and direct supervisor. Ability to conduct work as assigned by senior management. Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day. Ability to understand industry traceability and documentation requirement as required for each industry Ability to evaluate and differentiate between various commodity types. Review and implement detailed inspection reports to provide all information regarding product testing and inspection Compile, review data and complete test reports IAW CTG Standards Ability to use general inspection gages, Ex. Calipers, Micrometers, etc. Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements. Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity. Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements. For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports. Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections. Comply with all requirements of the AS9120, ISO 9001, ASA-100, and IDEA QMS 9090 Quality Management System and criteria of CCAP-101, AS6081, AC7402 and ANSI/ESD-S20.20 STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC - Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts - Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Daily throughput (inspections/Lab steps completed) Quality Issue detections (Incoming NCM ) Outgoing Quality (customer Escapes) IDEA Certification and knowledge implementation Use of GD&T and FAI knowledge for timely FAIR completion Issue communication Daily 6S/ESD/FOD policies followed Ability to find datasheets/drawings information on CTG Systems Diversity of inspections (EC/EM/HA/Hardware/etc) Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY High School Diploma or equivalent with a minimum of 2 years' experience performing in-process and final inspection preferably in a machining, automotive or aerospace business Must be proficient in English, both written and verbal communication skills Good arithmetic skills are required Mechanical aptitude desired Ability to correctly use and interpret basic measuring tools including weight gauge, micrometer, caliper scale (linear), gauge blocks, thread gauges, and comparative standards Basic proficiency of Microsoft Excel and Word Independent; can work with limited supervision and direction Must complete IDEA-ICE-3000 Certification within 6 months of hire. Able to pass internal testing and training to meet internal requirements ASQ CQI certified or must completed certification within 1 year of accepting position Strong Electronics inspection knowledge preferred Must demonstrate acceptable vision requirement.

Job Description Alacrity Solutions Independent Contractor Automotive Mechanical Inspector Alacrity Solutions is a full end-to-end provider delivering streamlined insurance claims, repair, and recovery solutions. As one of the largest independent providers of insurance claims services in North America, we provide property, auto, heavy equipment, and casualty claims management services. Our staffing capabilities, temporary housing services, managed repair network, and subrogation services support a fully integrated solution for all your needs from first notice of loss through completion of repairs. By assembling the best service providers through strategic acquisitions and relying on the right talent, Alacrity Solutions provides consistent, professional, and scalable services throughout the entire claim handling and resolution process. To learn more, visit ************************** The objective of the Automotive Mechanical Inspector is to travel to repair facilities in your area to verify mechanical failures. Skills & Requirements/Licensure: Candidate must have a minimum of 5 years hands on automotive repair experience, ASE or equivalent Manufacturer Certifications. Ability to take high quality photos and video, valid driver's license and some basic tools required. Computer and Phone System Requirements: Smartphone with ability to receive text messages and monitor email. Computer with internet access. Experience with web-based applications a plus. Working Conditions / Physical & Mental Demands: The physical demands described here are representative and must be met by the independent contractor to successfully perform this job. 100% travel is required within designated working territory based on the location of assignments received. Normal office or field claims environment. Ability to operate a motor vehicle for up to 8 hours daily, repeatedly entering and exiting the vehicle. Must be able to make physical inspections of auto loss sites. Must be able to work outdoors in all types of weather. Why Choose Alacrity? Flexibility: Self-determined Scheduling Competitive payment rates. Weekly pay. Knowledgeable office staff working to assure our inspectors are fully trained and supported from initial onboarding to being a long-term inspector. Come join us to turn your knowledge into a career without turning a wrench ever again! Diversity Statement Alacrity is an equal opportunity employer and is committed to providing employees with a work environment free of discrimination and harassment. All decisions pertaining to an employee's employment are made without regard to race, color, religion, sex (including sexual orientation, pregnancy, childbirth), gender, gender identity or expression, age, national origin, ancestry, physical or mental disability, medical condition, reproductive health decisions, veteran's status, genetic information, creed, marital status, disability, citizenship status, or any other characteristic protected by applicable law. How Long We Retain Personal Information: We will keep your personal information for as long as necessary to fulfill legitimate business purposes and in accordance with applicable laws. Powered by JazzHR h9k7P8llCH

QUALITY CONTROL - WALDWICK NEW JERSEY START NOW !!!!!!!!!!!!!!!!!! ** We are looking for reliable and responsible candidate for warehouse associate in Waldwick. Pay rate: $13.50 (NEGOTIABLE DEPENDING ON EXPERIENCE) 2nd shift QA( Quality Assurance) Train for 2 weeks on 1st shift MONDAY - FRIDAY ( 7am-3:30pm) Regular hours MONDAY - FRIDAY 3pm-11:30pm OVERTIME AVAILABLE Must work weekends.( rotate) Requirements: Computer Knowledge, Inspecting Materials, Test Samples Able to stand all day performing this job. Bilingual is a plus Must have transportation Benefits offered - Health Care Sick Pay 401 k offered in 2021 MUST HAVE TRANSPORTATION!!!!!!!!!!!!!!!! Start now! Vaccinated

Quality Control Microbiology Analytics I, II, III QC Microbiology Analyst I The Quality Control Microbiology Analyst I serves as a support role to clinical and/or commercial production. The QC Microbiology Analyst I will perform environmental monitoring activities including, but not limited to, non-viable particulate testing, active air viable, passive air viable, surface viable, and personnel monitoring. This position will report into the Manager of QC Microbiology. Environmental monitoring in controlled environments: Non-viable particulate monitoring; Active viable air monitoring, Personnel monitoring, Surface sampling, Passive air monitoring Equipment monitoring: Ensure equipment is in proper working conditions; Ensure all equipment is properly; maintained/calibrated; Assist with routine laboratory testing; Plate reads and incubations Shipping of test samples and equipment to contract laboratories for testing Complete all documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP). REQUIREMENTS Associates degree in a science or relevant field required; Minimum 0-2 years of experience or equivalent experience. Environmental monitoring or within the biopharmaceutical industry experience preferred. Proficient with computer software such as; Microsoft Office Strong written and oral communication skills Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities Trained in GxP/GDP, Safety The QC Microbiology Analyst I must be able to maintain aseptic behavior within a cleanroom environment for an extended period. Must have the ability to work in a team-oriented environment and with clients Must be able to work during the weekend, holidays and as required by the company Must be able to handle the standard/moderate noise of the manufacturing facility While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens. QC Microbiology Analyst II The Quality Control Microbiology Analyst II serves as a support role to clinical and commercial production. Microbiology Analyst II will perform environmental monitoring activities including, but not limited to, non-viable particulate testing, active air viable, passive air viable, surface viable, and personnel monitoring. This position will report into the Manager of QC Microbiology. Environmental monitoring in controlled environments; Non-viable particulate monitoring, Active viable air monitoring Personnel monitoring, Surface sampling, Passive air monitoring Equipment monitoring; Ensure equipment is in proper working conditions, Ensure all equipment is properly maintained/calibrated, Program equipment with proper workflows, Assist with routine laboratory testing, Plate reads and incubations Shipping of test samples and equipment to contract laboratories for testing Produce documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP) Writing/conducting investigations pertaining to environmental monitoring and testing Develop and train QC Microbiology Analyst I personnel on relevant business processes. REQUIREMENTS BA/BS in a science or relevant field required or equivalent experience; Minimum 2-4 years of experience with environmental monitoring or within the biopharmaceutical industry. GxP/GDP, Safety Trained Proficient with computer software such as; Microsoft Office, MODA/LIMS Familiarity with ISO and EU standards Strong written and oral communication skills Technical training ability Must have the ability to work in a team-oriented environment and with clients Must be able to work during the weekend, holidays, and as required by the company Must be able to handle the standard/moderate noise of the manufacturing facility The QC Microbiology Analyst II must be able to maintain aseptic behavior within a cleanroom environment for an extended period. Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens. QC Microbiology Analyst III The Quality Control Microbiology Analyst III serves as a support role to clinical and/or commercial production. The QC Microbiology Analyst III will coordinate data for batch release, participate in project/client meetings, and author/revise environmental monitoring procedures. Additionally, the QC Microbiology Analyst will perform environmental monitoring activities including, but not limited to, non-viable particulate testing, active air viable, passive air viable, surface viable, and personnel monitoring. Documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP). Coordinates data for batch release Participation in project/client meetings and communications, providing scientific and technical expertise Authoring/revising Standard Operating Procedures, Work Instructions, Forms, and Protocols Review of investigations and documentation of non-confirming events and environmental excursions. Apply expertise of compliance requirements to maintain an inspection-ready state. Participate and act as subject matter expert during audits/inspections Develop and train QC Microbiology Analyst II on relevant business processes Processing of purchase orders for outsourced testing and lab supplies Coordinates work orders REQUIREMENTS BA/BS in a science or relevant field required or equivalent experience; Minimum 5-7 years of experience with environmental monitoring or within the biopharmaceutical industry GxP/GDP Trained Proficient with computer software such as; Microsoft Office, MODA/LIMS, Microsoft Visio (preferred), Netsuite (preferred), Maximo Asset Management System (preferred) Proficient knowledge of ISO and EU standards Strong knowledge of quality systems and ability to interpret Quality standards for implementation and review. Strong written and oral communication skills Strong technical writing skills Technical training experience Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen. Must have the ability to work in a team-oriented environment and with clients Must be able to work during the weekend, holidays and as required by the company Must be able to handle the standard/moderate noise of the manufacturing facility Working Environment While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens. Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen. Other exposures may include gases (nitrogen), or corrosive chemicals (Clorox, potassium hydroxide), or exposure to liquid nitrogen. The noise level in the work environment is moderately noisy. Must have the ability to work in a team-oriented environment and with clients Must be able to work during the weekend, holidays, and as required by the company Must be able to handle the standard/moderate noise of the manufacturing facility Physical Requirements The QC Microbiology Analyst II must be able to maintain aseptic behavior within a cleanroom environment for an extended period. Must be physically capable to stand; walk; site; bend; stretch; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. Occasionally personal protective equipment may be required including lab coat, latex gloves, safety glasses and/or respirator. Please note these job descriptions are not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.