Quality inspector jobs in Iowa

Job DescriptionResponsibilities: Supervise and audit truck loading/unloading of 2040 wooden book carts per truck. Verify compliance with Googles packing/handling instructions at pickup library sites. Observe loading process, document compliance, take photos, and prepare full report. Ensure professional representation of ProQC and CLIENT on-site. Recurring 12 inspections monthly at assigned location. Technical & Industry Experience: Minimum 3- 5 years in quality inspection, container loading supervision, or field audits. Strong understanding of container loading supervision and packing audits. Familiarity with auditing bulk/specialized cargo handling (wooden carts, books, or equivalent). Ability to verify compliance against written packing/handling instructions. Strong reporting and documentation skills. Logistics, warehousing, shipping, or field audit inspections. Experience with corporate clients, libraries, or academic institutions an added plus. Job Type: 1099 Contractor Project Duration: Monthly recurring inspections through approx. MarchJune 2026. Note: This is a 1099 contract role project duration may vary based on client needs Shift Hours: Typically, during library pickup hours (daytime, exact times TBC with logistics partner).1 inspector per city per assignment. Note: As a 1099 contractor, project schedules may vary depending on site availability Location: Must be able to travel to Ames, IA and nearby areas (exact CLIENT address can ONLY be shared once contractor joins)

Driven by Possibility Gates Corporation is a leading manufacturer of application-specific fluid power and power transmission solutions. At Gates, we are driven to push the boundaries of materials science to engineer products that continually exceed expectations. We don't rest on our rich heritage of innovation. We leverage it to inspire solutions that will power the next hundred years. We invest continually in R&D and technology, so our products not only outperform industry standards; they exceed our customers' demanding expectations. We invest in our people, bringing real-world experience that enables us to solve our customers' diverse challenges of today and anticipate those of tomorrow. And we are constantly expanding our product catalog and value-added service offerings to support every facet of our customers' operations. In the most extreme environments and those more familiar, Gates is there with the right product, in the right place at the right time. Whether building original equipment or maintaining products in the aftermarket, we enable companies in every industry to be more efficient, productive, and profitable. We are Gates. THE ROLE This position is based at assigned customer location and will move between Dubuque and Davenport to perform sampling inspections of products to ensure the highest quality products' availability to our customers. The incumbent will work with our operations teams to execute sorting / containment activities upon the identification of any defect. And help in the necessary quarantine, return, and replacement of Gates product to keep customer operations working effectively and on-time. The ability to read technical drawings and specifications is required of the incumbent to be able to inspect special characteristics that can affect the proper fit, form, and function of Gates finished goods. The ability to utilize common inspection equipment such as calipers, tape measures, micrometers, thread gages, depth gages, and gage blocks is preferred and will aid the successful candidate. Good interpersonal skills and effective communication with customer and internal personnel are essential to success in this role as well. This position reports directly to the Brantford, Canada Quality Supervisor and is vital in completing activities that improve customer satisfaction with Gates. ESSENTIAL DUTIES AND RESPONSIBILITIES: Other duties may be assigned beyond the core functions listed below. 1 50% Perform quality inspections of Gates product at customer locations according to defined sample plans utilizing proper inspection equipment. 2 45% Execution of containment / sorting activities for nonconformities found as determined appropriate through communication with the Gates manufacturing plant. Communication with customer representatives to ensure that any containment activities are coordinated with them to avoid unnecessary downtime in their operations. 3 5% Administrative work associated with documentation of issues and their associated corrective actions. SUPERVISORY RESPONSIBILITIES: No direct reports to this role. The position will work with Gates and Customer operation site management (Plant Manager, Quality Manager, Operations Supervisors, QE's, etc.), corporate quality, and customer representatives. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. High school diploma or GED Some undergraduate college study preferred, but not required if equivalent work experience in manufacturing obtained. Three years manufacturing experience in quality preferred REQUIRED SKILLS: An effective communicator with capability to interact with all layers of management Drive, intelligence, and high expectations of getting results through self and team. High level interpersonal skills with capability to influence, listen, understand and partner with Gates Operations and Customer Operations personnel. Proficiency using common PC applications: MS Word, MS Excel. Competent in reading, interpreting and applying drawings, schematics and technical documents. WORK ENVIRONMENT: Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit; use hands to finger, handle, or feel objects, tools, or controls; and talk or hear. The employee is occasionally required to stand, walk, and reach with hands and arms. The employee must frequently lift and/or move up to 10 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. While in Manufacturing Plants or Distribution Centers, the environment in some areas could require safety PPE to include hearing protection, steel toed shoes, and safety glasses. Gates Corporation is an Equal Opportunity and Affirmative Action Employer and is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of race, sex, color, religion, age, disability, pregnancy, citizenship, sexual orientation, gender identity, national origin, protected veteran status, genetic information, marital status, or any other consideration defined by law.

JOB TITLE: OGP Inspector REPORTS TO: Production Supervisor or Quality Lab Supervisor FLSA: Non-exempt JOB SUMMARY: Inspects molded plastic parts to insure product quality that meets or exceeds customer specification and requirements. ESSENTIAL DUTIES AND RESPONSIBILITIES: Uses inspection process based on control plans and work instructions Maintains an organized work area to ensure inspected parts are separated from those not yet inspected Completes required documentation and records the results of inspection and testing using paper and electronic systems Counts or packs parts to prepare for shipping or storage Follows established quality procedures to carry out directives Communicates production problems with lead people or management as needed Operate OGP Release product for shipping as required by control plan and work instructions Other duties as required REQUIRED KNOWLEDGE, SKILLS & ABILITIES: Education/Experience . High school education coursework or GED required. Computer Skills . Ability to enter data into computer, operate telephone and send email for intercompany communication. Ability to use microscope or other inspection equipment required. Language Skills . Ability to read, comprehend and utilize instructions and short correspondence. Mathematical Skills . Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers. Ability to count with accuracy. Reasoning Ability . Ability to solve practical problems. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Other Skills and Abilities . Must possess the interpersonal skills to deal courteously with co-workers and supervisors Supervisory Responsibilities . None. Physical Demands . While performing the duties of this job, the incumbent is frequently required to sit/stand and use hand to manipulate very small parts or tweezers. Sense of touch may be used to detect texture, burs and edges. Frequent movement throughout the facility is required. Normal or corrected to normal vision is required with good color vision, close vision, and ability to use microscope and adjust focus. While performing the duties of this job, the incumbent is regularly required to talk and hear. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. Dexterity to handle small parts necessary. Work Environment . The duties of this job are executed in a climate-controlled environment with few temperature or humidity extremes. Noise levels will vary from very low to moderate depending on the location that the work is performed within the facility. The noise level in the work environment is usually moderate The description given is intended only to provide information about the general nature of the job and is not an all-inclusive list of the job duties, skills or abilities. Employment with Accumold is “at will”, meaning that either the employee or the company may terminate employment at any time and for any or no reason

As a Data Center Quality Inspector I, you provide superb quality control services for our clients. The work includes performing essential inspections of electrical equipment and systems, such as switchgear and substations. Detailed knowledge of mechanical and instrumentation is critical to conduct inspections and interpret electrical drawings and specifications. Attentively, you ensure the equipment and technicians around you comply with company and site safety requirements. You prepare detailed daily reports about your findings, including time tracking and special inspection reports. Diligently, you approve and submit important documents such as Lockout/Tagout (LOTO) requests, team reports, and time tracking reports. You take pride in assuring that our clients receive safely installed and functional equipment every time. If you are an analytical and detail-oriented individual who communicates effectively and prioritizes safety, this could be the position for you! Travel may be required. Responsibilities Ability to read and interpret electrical drawings and specifications. Prepare written documentation such as daily narratives (work reports), special inspection reports, and daily time tracking. Perform inspections of switchgear, standby generators, protective relays, and other electrical distribution components. Submit LOTO requests, review and approve team reports, and time tracking. Ensure compliance with all company and site safety requirements. Benefits Competitive pay, depending on experience. Medical, dental, vision, 401(k) with company match, among other benefits. Holidays and paid vacation time. Extensive learning and development opportunities. Requirements: Requirements High school diploma or equivalent. Higher education degree preferred. Minimum of two years of experience inspecting, testing, commissioning, or operating electrical distribution systems. Commercial or naval nuclear experience is strongly desired. OSHA 10-hour Construction Safety training. Commitment to excellence and high standards.

Reports to Site Supervisor/Site Leads Quality Inspector Responsibilities (To include but not limited to the following) Client Relationship & Business Development The Quality Inspector acts as an impartial third party between the production source and the customer facility to ensure the product meets set criteria. Operations The Quality Inspector performs quality inspection / quality audits on incoming material using hand gaging and visual techniques to determine conformance to specifications and fitness for use. Contains non-conforming parts and/or sub-assemblies. Rectifies non-conforming material by rework, sorting and/or scrapping as directed by Team Leader. Uses methods such as de-rusting, grinding, drilling, tapping, assembly and/or disassembly to rectify non-conforming material. Determines the tools and equipment needed to do the job. Grinds, sands, cleans and oils parts and/or sub-assemblies by using hand tools or equipment. Organization & Management Communicate sort/inspection results to managers, supervisors and production source. Technical MUST be able to use basic hand tools such as gaging, drills, taps, grinders and/or sanders to repair and/or clean parts and/or sub-assemblies. Utilize company portal for time recording and policy acknowledgements. Knowledge, skills, abilities Hard skills · Proficiency in English · Excellent written and verbal communications skills · Ability to Coordinate, prioritize and multitask · Demonstrated flexibility within a fast-paced, challenging environment · Ability to take initiative and recognize needs · Ability to handle highly sensitive and confidential material · Ability lift /move 30 pounds · Must have reliable transportation Work experience Overall recommendations 1+ year in Quality related position. Basic knowledge of materials and production processes. Basic knowledge of quality control methods. Education background Overall recommendations High School Diploma or Equivalent About TRIGO Global Quality Solutions Founded in 1997 10,000 professionals in 20+ countries worldwide Serves the automotive, aerospace and heavy transportation industries Offers quality control & supply chain services including inspection, logistics, auditing, consulting & training The leading quality solutions provider, trusted by the world's top 10 automotive & aerospace companies TRIGO Global Quality Solutions is committed to equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability.

Responsible for inspector of raw materials, in process, and finished goods during production. Must make sure the part is to customer specifications and engineering drawing. Requires strong attention to detail and the ability to work independently in a fast-paced environment with minimal supervision. Must evaluate defects based on inspection criteria and alert appropriate personnel when required. PRIMARY DUTIES AND RESPONSIBILITIES * Follows applicable procedures, instructions, engineering drawings, and training. * Verifies and inspects raw materials during coating procedures. * Verifies and inspects in-process goods during converting/packaging procedures. * Assists in removing of product for finished order in the cell they are working in. * Alerts appropriate leadership of any issues that arise during a production run. * Reads, follows, and understands standard operating procedures. * Handles all materials and chemicals according to SDS and uses required PPE. * Works as part of the team with the other employees in the manufacturing room/cleanroom. * Maintains batch time set by manufacturing when performing inspections. * Evaluates product defects and makes decisions regarding the status of the product based on the inspection criteria. Notifies supervision of defective parts. * Can work with minimal supervision on inspection procedures and other assigned tasks. * In a timely manner, performs product inspections in assigned production stage. All inspections should be performed according to established written Quality Department procedures, engineering drawings, customer specifications and documentation. This includes critical inspection items that may affect the function and safety of the product. * Assists in the collection and verification of parts (in process/finished good sampling) both during and after production runs as required. * Fills in as required and trained for any position in all areas of the Quality Department. * Alerts supervision or management of problems with materials, product, tools, etc. * Works as a team with the other employees in all departments to complete inspection functions. * Prioritizes and completes work in a timely manner as outlined by supervision and management. * Inspects multiple product types in any given shift. May require switching between different products throughout the shift. * Evaluates product defects and make decisions regarding the status of the product based on the inspection criteria. Notifies supervision to perform any necessary rework or reject classification of defective parts. * Maintains working knowledge of processes and instrumentation used in the Quality Department. * Leads in the areas of attitude, work quality, work ethic, dependability, and company loyalty. * Regular and reliable attendance is an essential function of this job. Punctuality and regular attendance are crucial for efficient plant operations, safety, and morale. * Other duties and responsibilities may be assigned as required. AUTHORITY * Requests necessary supplies and resources required to complete the jobs assigned. * Rejects nonconforming product. * Alerts supervision regarding problems with materials, assemblies, tools, etc. * Accepts product within specification. Experience and Skills: QUALIFICATIONS * Attention for detail, and the ability to accurately record testing results and inspection criteria on quality records. Must be able to complete a position assessment test. * Able to perform routine tasks on a continuing basis. * Able to correctly inspect and test product according to instructions, engineering drawings, customer specifications and training. * Able to correctly use required tools, fixtures, rulers, testing equipment, etc. involved in the testing and inspection processes. * Able to communicate and work with others as a team. * Able to read and write English. * Able to read and understand the product criteria on engineering drawings. * Able to recognize quality problems with materials, work in process, and the final product. * Good work attendance and dependability. * If working nights or shifts with minimal supervision, must be able to pass a criminal background check. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand, walk, or sit. The employee is regularly required to use hands to grasp, finger or handle objects and reach with hands and arms. The employee is frequently required to talk and hear. Specific vision abilities required by this job include close vision and distance vision. This employee must occasionally lift and /or exert force from 25 pounds up to 75 pounds. Push and/or pull up to 300 pounds. WORK ENVIRONMENT Majority of time spent sitting or standing at a workstation, inspecting product. May need to operate testing equipment or use tools and/or fixtures as part of the inspection and testing processes. Benefits At Surmasis, we're proud to offer a comprehensive benefits package, including: * Medical Insurance - PPO & HMO plans * Dental and Vision Coverage * Flexible Spending Account (FSA) * Life Insurance Options * Short-Term and Long-Term Disability (STD/LTD) * 401(k) Retirement Plan We believe in taking care of our team-so you can focus on doing your best work.

TRIGO Global Quality Solutions has an immediate opening for a Quality Inspector in Dubuque, Iowa. The pay is $17-18hr and shift hours are 5:30am - 2:00pm Mon-Fri. Reports to Site Supervisor/Site Leads Quality Inspector Responsibilities (To include but not limited to the following) Client Relationship & Business Development * The Quality Inspector acts as an impartial third party between the production source and the customer facility to ensure the product meets set criteria. Operations * The Quality Inspector performs quality inspection / quality audits on incoming material using hand gaging and visual techniques to determine conformance to specifications and fitness for use. * Contains non-conforming parts and/or sub-assemblies. * Rectifies non-conforming material by rework, sorting and/or scrapping as directed by Team Leader. * Uses methods such as de-rusting, grinding, drilling, tapping, assembly and/or disassembly to rectify non-conforming material. * Determines the tools and equipment needed to do the job. * Grinds, sands, cleans and oils parts and/or sub-assemblies by using hand tools or equipment. Organization & Management * Communicate sort/inspection results to managers, supervisors and production source. Technical * MUST be able to use basic hand tools such as gaging, drills, taps, grinders and/or sanders to repair and/or clean parts and/or sub-assemblies. * Utilize company portal for time recording and policy acknowledgements. Knowledge, skills, abilities Hard skills * Proficiency in English * Excellent written and verbal communications skills * Ability to Coordinate, prioritize and multitask * Demonstrated flexibility within a fast-paced, challenging environment * Ability to take initiative and recognize needs * Ability to handle highly sensitive and confidential material * Ability lift /move 30 pounds * Must have reliable transportation Work experience Overall recommendations * 1+ year in Quality related position. * Basic knowledge of materials and production processes. * Basic knowledge of quality control methods. Education background Overall recommendations * High School Diploma or Equivalent About TRIGO Global Quality Solutions * Founded in 1997 * 10,000 professionals in 20+ countries worldwide * Serves the automotive, aerospace and heavy transportation industries * Offers quality control & supply chain services including inspection, logistics, auditing, consulting & training * The leading quality solutions provider, trusted by the world's top 10 automotive & aerospace companies TRIGO Global Quality Solutions is committed to equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability.

General Duties and Responsibilities: Responsible to the Direct Supervisor, or their designee. On matters of product acceptance, individuals shall have direct access to the Quality Manager, or their designee, whose decision will be final. Complies with the requirements and procedures specified in the QA manuals while supporting the goals established by the Value Stream(s) or area assigned. Works with other departments to determine and resolve nonconformances in a timely fashion. Interprets applicable process documentation, (i.e., shop order, purchase order, requisition, LSC documentation, prints, etc.) to determine attributes of product to be examined or audited using applicable methods and/or instrumentation. Operates material handling equipment. Stores, locates, and pulls material, and performs necessary computer transactions for inventory control and tracking. Performs other job assignments and responsibilities as directed and/or when specific requirements or workload dictate. The NQT shall participate in teams to accomplish specific goals of the Value Streams such as throughput, quality, cost of operations, safety, Lean manufacturing, and training. The NQT shall ensure adequate coverage of Inspection duties to prevent a lapse in product flow. All members of the Value Stream shall be proficient in the performance of auditing practices established. Individuals shall follow all plant and department rules. Specific Duties and Responsibilities: The NQT shall support the manufacturing processing by: Performing tasks within the Processing cell as designated (i.e., Receiving, Stores, Inspection, Nuclear Safety Related, etc.) Utilizing equipment and skills to troubleshoot problems in product and in teams resolve product and manufacturing process problems as necessary. Performs inspection and audit duties on assemblies as required. Performing all necessary Quality driven activities within the assigned area. The NQT shall support the overall goals of the Value Stream Manufacturing Processes including throughput, safety, quality, cost of operations, and training. The NQT must be proficient in the use of material and dimensional testing equipment. The NQT shall exhibit solid multi tasking abilities during daily activities. The NQT shall be responsible for meeting daily production goals. Educational and Physical Requirements: Must be able to read and comprehend procedures and processing documentation. Capable of writing legibly when filling out required documentation, perform average calculations, and interpret complicated part drawings. The NQT will be required to exhibit suitable Geometric Dimensioning and Tolerancing (GD&T) skills. Must display natural or corrected vision of 20/22 with both eyes and normal color perception. Must be capable of reading a minimum of Jaeger 1 letters at a distance of not less than 12 inches on a standard Jaeger test chart. Each individual will continue to expand capabilities to diversify the position held. Must possess high school diploma or GED equivalency. Training and Experience: Must become competent in use of inspection tools, gaging, and manufacturing process documentation. Must develop accurate data entry and computer skills to proficiently perform applicable inspection tasks. Individuals must demonstrate continuous enhancement of their capabilities through the use of the Inspection Training Outline. Must successfully complete applicable "Skills Review" and acceptably complete applicable Training Program. Shall complete the Weld Inspection Fundamentals training course. Our Culture & Commitment to You: At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. Our training programs and initiatives focus on end-to-end development, from onboarding through senior leadership. We provide a wide range of development opportunities, including face-to-face and virtual training, mentorship and coaching, project management, and on-the-job training.

Quality Inspector - Des Moines, IA Hiring Immediately! Job Title: Quality Inspector D2 Pay: $15.00/hr Schedule: Thursday-Saturday, 7:00am-7:00pm Build Your Career as a Quality Inspector! Advance Services, Inc. is hiring Quality Inspectors in Des Moines, IA to ensure high-quality standards throughout all stages of the production process. This full-time opportunity is ideal for detail-oriented individuals who take pride in accuracy and consistency. Enjoy steady weekday hours, weekly pay, and long-term growth opportunities with a trusted company. Responsibilities Audit and inspect products throughout production and during final testing. Maintain accurate records and follow established quality procedures. Evaluate and determine product status based on inspection results. Maintain attention to detail and follow all safety procedures Qualifications 6+ months of similar experience. Reliable time and attendance *Employment contingent on drug test (including THC) Why Work with Advance Services, Inc.? Competitive weekly pay Health benefits for you and your family No application fees - ever! Easy application process Fun safety and attendance incentives Excellent referral bonuses Opportunity to work with top companies in your area Apply Today! Click the “Apply” button or visit our website: *********************** Select the Des Moines, IA branch or call us at ************. Walk-ins welcome! Visit our friendly team at 10888 Hickman Rd, Suite 1, Clive, IA 50325 Advance Services is an Equal Opportunity Employer. #427

Mestek Machinery is the industry-leading designer and manufacturer of the most complete, productive, and innovative metal forming solutions for the fabrication of HVAC sheet metal ductwork and fittings. Our family of companies -- Lockformer, Engel, Iowa Precision, Roto-Die, have decades of experience addressing every facet of the HVAC duct industry. The result is a combined knowledge and experience that develops cutting edge, precision technology and automated manufacturing equipment that improves productivity while ensuring the highest-quality finished ducts and fittings. JOB DESCRIPTION Quality Tech will conduct routine quality inspections throughout production, including in-process and final inspections of new machinery. ESSENTIAL DUTIES QC inspection of all new equipment. Conduct reviews of checklists for compliance with equipment specification standards per customer purchase agreements. Is a liaison between production and engineering for technical updates. Will participate in overflow part quality check as needed for machining operation. Design and implement methods for process control, process improvement, testing and inspection. Record and maintain documentation of all machinery inspections. Work with the safety committee to ensure continuous compliance with all environmental, health, and safety (EHS) regulations and standards. Identify and troubleshoot quality issues and recommend solutions. Collaborate and train production staff in quality control procedures and standards. Participate in continuous improvement initiatives to enhance quality control processes. Communicate quality control findings and recommendations to management. Support Service as needed with new equipment installations. Performs assumes other duties and responsibilities as may be required.

Transco As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. Who We Are: Transco Railway Products, Inc. has been the leader in providing railcar maintenance and services to the railcar industry. We have earned the reputation for honesty, integrity, and superior quality which has allowed us to establish a committed customer base. Transco is part of Marmon - a strong, growing, global organization that consists of more than 100 autonomous manufacturing and service companies. Job Description: We are looking for a Quality Control Inspector to perform final inspections on railcars to ensure the required work is completed and in compliance with industry standards and customer requirements. The QC Inspector will also support the production team with other quality initiatives as needed. Job Requirements: * Perform inspections of the final product to assess the quality of work performed and compliance to company standards using checklists, reports, forms, procedures, hand tools, gauges, and test instruments. * Work with production to identify and plan for the day's shipments to ensure verifications and inspections are made in a timely manner. * Ability to use railroad gauges, testing techniques, and test equipment necessary for railcar inspections. * Report adverse and/or non-compliant items to the responsible supervisor and QA Manager and follows-up to confirm that remedies have been put in place on items before the car is released to subsequent processes/stages. * Communicate technical information verbally and in writing. * Ability to instruct employees on proper railcar maintenance activities using established procedures and training materials. * Able to perform tasks that require climbing and balancing on ladders and platforms. Verifies cars are properly secured and identified prior to being released. * Able to pass drug screen and physical. What We Offer: * Transco strives to be the Employer of Choice. Our generous benefits package includes: * Benefits on Day 1 * Medical/Dental/Vision with first in class vendors * Health Savings Account * Flexible Spending Account (Medical and Dependent Care) * Company Paid Benefits: Short Term Disability, Long Term Disability, Life Insurance * Employee Assistance Program * 4 weeks of Paid Parental Leave * Vacation Benefits * 401k with generous company match and additional employer annual contribution Don't worry if you think that you do not meet all the qualifications. The tools, technology, and methodologies we use are constantly changing and we value talent and interest over specific experience. It is the policy of Transco to provide equal employment opportunities to all qualified persons, and to recruit, hire, train, promote, and compensate persons in all job without regard to race, color, religion, sex, national origin, disability, or sexual orientation, gender identify, protected veteran status or any other protected characteristic protected by the law. Pay Range: 54,000.00 - 66,000.00 We offer a comprehensive benefits package that may include medical, dental, vision, 401k matching, and more! Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

Job Description Loenbro Mission Critical has strategically shifted its focus to specializing in data center and mission-critical electrical projects. This decision capitalizes on the growing demand for reliable and innovative electrical solutions in the digital age. By specializing in this niche, Loenbro aims to excel in providing cutting edge electrical infrastructure for data centers and mission-critical facilities, positioning itself as a trusted partner in a rapidly expanding industry. This shift offers opportunities for specialization, long-term partnerships, technical innovation, and diversification, while also presenting challenges such as competition and compliance. To succeed, Loenbro must invest in expertise, adapt to changing regulations, and stay at the forefront of technological advancements, ultimately solidifying its reputation for quality and reliability in this critical sector. Position: Quality Control Inspector Company: Loenbro - Industrial Services Group Reports To: Regional Quality Manager Location: Cedar Rapids, Iowa Do you want to work for an industry leading, growing, diversified employer who believes in doing what we say, leading by example, doing the right thing, and practicing stewardship? Loenbro is a leader in the industrial services space who strives to be more than just a contractor to our customer, but a business partner who provides superior quality and service. This is your opportunity to work for a great employer who puts employees and their customers first. We have worked hard to build and maintain our reputation and are looking for industrious, conscientious, and motivated individuals to join our team. We encourage you to visit our website at *************** to learn more about our organization and who we are. Position Overview: We are looking for an experienced initiative-taking QC Inspector to join our growing Industrial Construction team. This position will be responsible for the duties listed below along with other related functions. A team-oriented mentality and the drive to continuously improve is what sets the Loenbro team at the top of the industry. This position works closely with related engineering, construction, fabrication, and other departments to ensure that the team's aligned goals are met. Employee will be expected to travel to remote jobs as needed throughout the intermountain region and possibly beyond Job Duties: Weld Map Isometric drawings. Enter welding and inspection information into tracking tools. Assist with pressure testing plans and functions. Review and File NDE/NDT Reports. Work with NDE personnel for planning and execution of work. Assemble and review project documentation packages. Perform and document inspections based on drawings, specifications, and procedures to determine compliance. Perform weld inspections. Review welding requirements and ensure welding procedures comply. Create and implement Project Quality Assurance Plans. Provide support and training to other inspectors. Write inspection and assess plans (I&TP's). Committed to Loenbro's core values and safety policies. Skills/Qualifications: Have a current AWS CWI or ASNT VT II or ability to pass the VT II exam. Knowledge of NDT methods (UT, MT, PT, RT) with ASNT-SNT-TC-1A documented training/hands on hours. Well-rounded with ASTM standards and materials. Efficient in Microsoft Excel and Word. Ability to communicate effectively with co-workers Quality Control Inspector. Excellent interpersonal written and verbal communication skills. Elevated level of organizational skills. Extensive knowledge of reading and understanding drawings. Must be a quick learner and motivated. Ability to travel and relocate as needed. Initiative-taking with the drive to learn and grow. Must be able to work as a team. Essential Requirements: Comply with all company policies and procedures. Ability to work in a challenging environment. Climbing up and down stairs and ladders while working on scaffolds and in trenches to access work. Lifting up to 50 pounds. Walking on uneven terrain for extended periods. Standing for extended periods. The use of respirators if required by projects Quality Control Inspector. Driving if required to travel to and from locations. Occasionally you may need to kneel, reach, or stoop. If driving is required, a valid driver's license and proof of insurability is required. All drivers are subject to a DMV background records search. Benefits Personal Time Off (PTO). Holidays: 6 paid holidays. Health Benefits: All employees are eligible for medical, dental, vision and life insurance coverage. 401(k) Retirement: The Company provides a 100% match of the first 4% of employees' contribution each year, to the plan. Eligibility is immediately following 90 days of employment. We are "Leading the Change" in the Energy Services Industry. Our growth and successes have not changed who we are. We live our core values every day. WE TAKE ACTION WE DO WHAT WE SAY WE LEAD BY EXAMPLE WE DO THE RIGHT THING WE PRACTICE STEWARDSHIP Loenbro is an Equal Opportunity Employer.

Job DescriptionJoin our client's team in Kansas City! Are you passionate about ensuring airworthiness and safety in aircraft maintenance? Our client, a leading aircraft component service organization, is seeking a Quality Control Inspector with a keen eye for detail. If you thrive on precision and excellence, this role is perfect for you.Job Summary: As a Quality Control Inspector, you will play a crucial role in ensuring all maintenance work meets airworthiness standards and regulatory requirements. You will conduct various inspections on aircraft components to determine serviceability and airworthiness, ensuring compliance with technical data and documentation standards. Responsibilities: Perform preliminary, routine, and in-process inspections on aircraft and components. Document maintenance activities following relevant regulations and standards. Conduct final buy-back of maintenance and issue airworthiness releases. Monitor compliance with safety regulations and scrap bin policies. Provide oversight, guidance, and assistance on the floor. Conduct facility audits for regulatory compliance. Complete OJT documentation and maintain training records. Qualifications: Minimum three years of heavy aircraft maintenance or aircraft component maintenance experience. FAA Airframe and Powerplant (A&P) License required. Knowledge of technical and regulatory documentation interpretation. Strong communication skills and ability to work effectively in a team. Proficiency in MS Office and basic computer skills. Ability to work various shifts and schedules. Prior NDI and QC experience preferred. Benefits: We offer a competitive hourly rate, full benefits package, and a dynamic work environment that fosters growth and development. If you are ready to take the next step in your aviation career, apply now for the Quality Control Inspector position at Kansas City.

Job DescriptionSalary: Job Title: Quality Control Inspector (Electrical Contractor) Employment Type: Full-Time We are seeking a Quality Control Inspector to oversee electrical construction activities on project sites, ensuring all work meets applicable codes, standards, and project specifications. This role plays a key part in promoting quality, safety, and compliance through inspections, documentation, and collaboration with field teams. Key Responsibilities: Inspect electrical installations and verify compliance with NEC, NFPA, IEEE, and project requirements Review drawings, specifications, and quality plans Document inspections, test results, and non-conformance reports (NCRs) Support field teams with quality assurance processes Ensure adherence to safety protocols including LOTO and arc flash Collaborate with project managers, subcontractors, and engineers to maintain high standards Qualifications: Bachelor's degree in a related field (or equivalent experience) Minimum 3 years of construction or field-related experience Proficiency in Microsoft Office and willingness to learn platforms like Procore and Bluebeam OSHA 30 preferred (or willingness to obtain) Strong attention to detail, communication, and organizational skills Work Environment: Primarily based on active construction sites with occasional office visits. Must be available for non-standard hours during key construction phases. What We Offer: Competitive Pay Comprehensive Benefits Package with Tax-Advantaged HSA and FSA offerings Employer-Paid Short- and Long-Term Disability Programs Employer-Paid Life Insurance Generous Paid Time Off Provisions 401K Retirement Savings Plan with Company Match Tuition Reimbursement Fully Paid Parental Leave Voluntary Products Including: Critical Illness Insurance and Accident Insurance Corporate Wellness Program with Wellness Time Off and Rewards Visa sponsorship is not available for this position at this time. The Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of the Company without a prior written search agreement will be considered unsolicited and the property of the Company. Please, no phone calls or emails. The Weitz Company, LLC (and its U.S.-basedsubsidiaries and affiliates) recognizes the value of and is committed to hiring and retaining a diverse and inclusive workforce.We are an Equal Opportunity Employer and follow applicable affirmative action guidelines and policies. All qualified applicantswill receive consideration for employment (including minorities, females, veterans, and individuals with disabilities, regardless of sexual orientation, gender identity, or other protected categories in accordance with applicablestate and federal laws). The Company is a drug and alcohol-free workplace and background checks are required if applicable.Click hereto review our Privacy Notice. Location Cedar Rapids, IA Department Safety & Quality Employment Type Full-Time Minimum Experience Experienced

As a Quality Control Inspector, you are an invaluable manufacturing team member, ensuring the highest production quality from in-process inspections to final inspections. Inspect products and materials visually and with measurement tools like torque wrenches, micrometers, or calipers. Your job is to ensure our products are consistently high quality and adhere to relevant specifications. Support operations and quality teams regarding the quality of the products and materials, process scrap, perform rework and efforts and help solve problems by providing rejection information for root cause analysis. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. * Perform quality inspections to ensure products and materials meet standards, print and/or specifications * Conduct quality in process and final inspections * Document issues noticed during testing, measurement or visual inspection * Removing products that don't meet production standards * Accepting or rejecting finished products and discussing inspection results with the production team and Quality Engineers * Serve as the primary quality resource to operations * Interface with quality and operation representatives concerning quality problems * Directly support the Quality Engineer to adequately control the quality hold area and the disposition of materials and products. * Directly support Quality Engineer to evaluate causes of scrap and work toward the elimination of such defects * Coordinate with Operations and direct associates on quality standards * Regular and reliable attendance at work * Participate in all TVS SCS quality and excellence initiatives. Competencies * Attention to detail * Be able to follow inspection sheets and work instructions * Knowledge of basic math and computer skills * Ability to influence others to follow work instructions, rules and regulations * Strong leadership skills and teamwork mentality * Verbal and written communication skills * Dexterity, physical strength, and physical stamina * Conscientious * Adaptable * Initiative Physical Demands The physical demands described here are representative of those that an employee must meet to successfully perform the essential functions of this job. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The associate may occasionally be required to lift 51 pounds, anything greater than 51 pounds requires assistance. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment This job is performed in a busy warehouse environment with high forklift traffic. Warehouses are subject to seasonal temperatures. Steel-toed shoes, safety glasses and vests are required personal protective equipment (PPE). It is estimated a 10% office environment and 90% warehouse environment. Position Type/Expected Hours of Work Full Time, Non-Exempt. Schedule flexibility for extended or unplanned work hours is required. Travel Travel is not expected for this position. Education and Experience * High school diploma or GED certificate * Ability to read work instructions/inspection sheets and use precise measurement tools, such as a torque wrench, micrometer, and caliper * Attention to detail * Ability to follow verbal and written instructions * Valid driver's license and reliable transportation * Proficiency with Microsoft Office Suite including Excel, Word, and PowerPoint Other Duties Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, responsibilities, and activities may change at any time, with or without notice. TVS SCS NA is committed to cultivating a diverse and inclusive culture as an EEO employer. The TVS SCS NA team does not discriminate against candidates and employees because of their disability, sex, race, gender identity, sexual orientation, religion, national origin, age, veteran status, or any other protected status under the law within any employment practices. We are pleased to provide reasonable accommodations to applicants; please contact [Hope Molyneaux, *********************] to request a reasonable accommodation. The employee selected for this role must be able to perform the position's essential functions satisfactorily. If requested, reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. TVS SCS NA complies with the CPRA: CALIFORNIA PRIVACY NOTICE **************************************************************************************************

For nearly 70 years, MasterBrand has been shaping the places where people come together, enriching lives and creating meaningful memories for our customers. That, combined with our stylish products, expansive dealer and retail network, and dedicated associates, has helped make us the number one North American residential cabinet business. Our unique culture of continuous improvement is based on trusting the tools , empowering the team and moving forward , and is kept alive by our more than 14,000 associates across 20-plus manufacturing facilities and offices. Visit ******************* to learn more and join us in building great experiences together ! Job Description The Quality Technician tests and inspects products at various stages of production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. Primary Duties and Responsibilities Include: Interprets engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality and reliability standards. Selects products for tests at specified stages in production process, and tests products for variety of qualities such as dimensions, performance, and mechanical, electrical, or chemical characteristics. Records test data, applying statistical quality control procedures. Evaluates data and writes reports to validate or indicate deviations from existing standards. Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Sets up and performs destructive and nondestructive tests on materials, parts, or products to measure performance, life, or material characteristics. Prepares graphs or charts of data or enters data into computer for analysis. Has an eye for color, finish, hardness, density or any other measurable characteristic of material. Works with Management to define Quality Standards which the product and processes must meet. Uses a variety of precision measuring instruments, including electronic devices and complex testing equipment. Other duties may be assigned as necessary. Qualifications Required Education, Training or Experience Must be fully trained and able to perform assigned job tasks in the assigned department. Minimum of 18 months of related experience is preferred. Knowledge, Skills and Abilities Ability to read measurement tools. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to apply common sense understanding to carry out detailed written or oral instructions. Work Environment Employees must be able to cope with Iowa climates; endure heat and cold conditions in the building. Fast paced workloads and moderate noise levels are normal. Paint fumes and exposure to chemicals associated may be present. Personal Protective Equipment as required by OSHA will be provided by the Company. Additional Information Equal Employment Opportunity MasterBrand Cabinets LLC is an equal-opportunity employer. MasterBrand Cabinets LLC's policy is not to discriminate against any applicant or employee based on race, color, religion, sex, gender identity or expression, national origin, ancestry, age, disability/handicap status, marital status, military status, sexual orientation, genetic history or information, or any other basis protected by applicable federal, state or local laws. MasterBrand Cabinets LLC also prohibits harassment of applicants or employees based on any of these protected categories. It is also MasterBrand Cabinets LLC's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Reasonable Accommodations MasterBrand Cabinets LLC is committed to working with and providing reasonable accommodations to individuals with disabilities. If you have a disability and wish to discuss potential accommodations related to applying for employment, please contact us at [email protected].

Job DescriptionSalary: We are looking for a highly skilled and self-motivated Quality Technician with the technical expertise of a Quality CAD Technician. This role plays a key part in ensuring all products meet rigorous quality and dimensional standards throughout the manufacturing process. The ideal candidate will have experience interpreting blueprints, working with stainless steel and aluminum, and thriving in a fast-paced production environment. Key Responsibilities: Inspect raw materials, in-process components, weldments, and finished products for accuracy and compliance with specifications. Read, interpret, and analyze engineering drawings and blueprints to validate product quality and adherence to design requirements. Use a variety of precision instruments and measurement tools such as calipers, micrometers, and CMMs to ensure dimensional accuracy. Perform detailed CAD reviews and assist with drawing updates or revisions to support continuous improvement and quality control initiatives. Conduct root cause analysis and support corrective and preventive actions for non-conforming materials or processes. Collaborate closely with Engineering, Production, and Fabrication teams to resolve quality issues and enhance manufacturing processes. Maintain accurate quality records, inspection reports, and documentation required for internal and external audits. Support the development and implementation of quality control plans, procedures, and work instructions. Participate in cross-functional improvement projects to streamline inspection processes and enhance product reliability. Train production team members on quality standards, blueprint reading, and measurement techniques. Qualifications: High school diploma or equivalent required; Associates degree or higher in Quality Assurance, Mechanical Design, or related technical field preferred. Minimum 2 years of quality inspection experience in a manufacturing or metal fabrication environment. Hands-on experience with stainless steel and aluminum manufacturing. Proficient in CAD software (AutoCAD, SolidWorks, or similar) and experienced in interpreting and validating engineering drawings. Strong understanding of quality standards, inspection practices, and statistical process control. Skilled in using precision measurement tools and quality inspection equipment. Extremely detail-oriented, organized, and capable of working independently. Excellent problem-solving and communication skills with the ability to work across departments.

Job Title: Quality Assurance (QA) Technician Salary Grade: 3 FLSA: Non-Exempt Physical Grade: 2 Job Status: Full-Time Travel Required: 0-5% Assist with development and improvement of quality standards, procedures, and work instructions. Review processes and products to assure they conform to applicable quality standards and work instructions. Train and coach other employees on proper work methods and promote understanding of quality standards. Complete and provide data and reports to management. ESSENTIAL DUTIES AND RESPONSIBILITIES The following duties are normal for this position. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned. More specifically, the person will: Assist manufacturing with implementation and compliance to company quality standards, procedures, work instructions, and certification requirements. Audit product and processes to assure compliance to standard work. Coach and train employees on proper work methods and promote understanding of quality standards. Work with management to evaluate and troubleshoot problems causing quality-related defects. Assist with corrective action teams to resolve identified problems. Ensure all parts and components are accurate according to specifications. Evaluate compliance of finished products to applicable specifications and tolerances. Compile data and complete special inspection reports per customer qualification requirements (i.e., ITP, PPAP, etc.). Evaluate returned goods and complete analysis reports (RGA) in a timely manner. Use and understand various paperwork, including but not limited to schedules, prints, & tech standards. Assist with selection, tracking and calibration of gages and measuring equipment. Assist with development and implementation of new and revised measurement systems. Use advanced measurement devices to provide data for manufacturing and engineering when required. Maintain accurate data and records in correct file locations and databases. Provide necessary reports to supervisors and management. Create, review and update work instructions, procedures, and other quality documents. Use proficient computer skills employing Microsoft Word, Excel, and be able to learn other special software as required to complete assigned responsibilities. Perform general housekeeping and maintenance on equipment. Perform extra assignments in other areas and related task assignments within the work area. Regular, consistent attendance. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Strong commitment to quality and working safely. Proficient computer skills; ability to use various computer programs to complete responsibilities (i.e., Microsoft Word, Excel, etc.). Ability to read various measuring devices (e.g., measuring tape, caliper, micrometer, etc.). Ability to work independently or as a team with minimal supervision. Prior experience in production and/or manufacturing or as a QA Technician preferred. Strong analytical skills with attention to detail and accuracy. Ability to pass Motor Vehicle Records (MVR) requirements to operate a company vehicle. EDUCATION - EXPERIENCE - COMPUTER SKILLS High school diploma or a general education degree (GED); One-year certificate from a college or technical school; or or one to two years' related experience and/or training; or equivalent combination of education and experience. TRAINING - CERTIFICATIONS - LICENSES Forklift license Valid State Driver's License Training in the following subjects is desired: CNC Machining, Welding, Print Reading, Geometric Dimensioning and Tolerances, Statistics, Statistical Process Control. Continually participate in additional training related to the job. COMPETENCIES To perform this position successfully, individual should demonstrate the following work competencies: Safety and Security - Observes safety and security procedures; uses equipment properly. Problem Solving - Identifies and resolves issues in a timely manner. Communication Skills - Speaks clearly, listens and receives clarification, respond to questions. Dependability - Follows instructions, responds to management direction, and takes responsibility. Quality Assurance - Demonstrates accuracy and thoroughness. Ethics/Professionalism - Treats people with respect; works ethically and with integrity. Organizational Support - Follows policies and procedures. Judgment - Exhibits sound and accurate judgment. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee: Must be able to frequently stoop/bend. Must be able to regularly use hands and arms. Must be able to regularly stand and walk. Must be able to regularly lift and/or move up to 50 pounds of equipment. Must be able to occasionally lift and/or move more than 50 pounds of equipment with assist available. Specific vision abilities required by this job include close, distance, color, and peripheral vision. Specific hearing abilities required for this job include the ability to hear equipment alarms and the ability to hear instructions from others. ENVIRONMENTAL ADAPTABILITY The noise level in the work environment is usually LOUD. While performing the duties of this job, the employee is occasionally exposed to wet or humid conditions (non-weather), outdoor weather conditions and extreme heat (non-weather). The employee is frequently exposed to fumes or airborne particles and vibration. Steel-toe safety shoes, safety glasses, and hearing protection required where posted. Additional PPE may be required when working in other areas. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee owner for this job. Duties, responsibilities, and activities may change at any time with or without notice. Precision, Inc. is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, the employer will provide reasonable accommodations to qualified individuals with disabilities and encourage prospective and current employee owners to discuss potential accommodations with Precision, Inc.

Job Title: Quality Control Inspector (Electrical Contractor) Employment Type: Full-Time We are seeking a Quality Control Inspector to oversee electrical construction activities on project sites, ensuring all work meets applicable codes, standards, and project specifications. This role plays a key part in promoting quality, safety, and compliance through inspections, documentation, and collaboration with field teams. Key Responsibilities: Inspect electrical installations and verify compliance with NEC, NFPA, IEEE, and project requirements Review drawings, specifications, and quality plans Document inspections, test results, and non-conformance reports (NCRs) Support field teams with quality assurance processes Ensure adherence to safety protocols including LOTO and arc flash Collaborate with project managers, subcontractors, and engineers to maintain high standards Qualifications: Bachelor's degree in a related field (or equivalent experience) Minimum 3 years of construction or field-related experience Proficiency in Microsoft Office and willingness to learn platforms like Procore and Bluebeam OSHA 30 preferred (or willingness to obtain) Strong attention to detail, communication, and organizational skills Work Environment: Primarily based on active construction sites with occasional office visits. Must be available for non-standard hours during key construction phases. What We Offer: Competitive Pay Comprehensive Benefits Package with Tax-Advantaged HSA and FSA offerings Employer-Paid Short- and Long-Term Disability Programs Employer-Paid Life Insurance Generous Paid Time Off Provisions 401K Retirement Savings Plan with Company Match Tuition Reimbursement Fully Paid Parental Leave Voluntary Products Including: Critical Illness Insurance and Accident Insurance Corporate Wellness Program with Wellness Time Off and Rewards Visa sponsorship is not available for this position at this time. The Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of the Company without a prior written search agreement will be considered unsolicited and the property of the Company. Please, no phone calls or emails. The Weitz Company, LLC (and its U.S.-based subsidiaries and affiliates) recognizes the value of and is committed to hiring and retaining a diverse and inclusive workforce. We are an Equal Opportunity Employer and follow applicable affirmative action guidelines and policies. All qualified applicants will receive consideration for employment (including minorities, females, veterans, and individuals with disabilities, regardless of sexual orientation, gender identity, or other protected categories in accordance with applicable state and federal laws). The Company is a drug and alcohol-free workplace and background checks are required if applicable. Click here to review our Privacy Notice. Location Cedar Rapids, IA Department Safety & Quality Employment Type Full-Time Minimum Experience Experienced