Quality inspector jobs in Las Cruces, NM

QC Inspector I&E will assist management in establishing project requirements for selecting the proper procedures and techniques for project quality control in the I&E segment of the project. Performs pre-installation inspections as required including materials, wire size, routing, tubing size, fittings, raceway, supports, and ties storage to ensure the compliance to the project specifications, governing codes, and/or manufactures recommendations. Documents inspection activities on the correct forms, checklist, or media approved the by the projects ITP or SOP. Required Qualifications - Essential Skills, Knowledge, and Abilities: • Previous construction experience within the oil and gas industry • Previous exposure to high voltage electrical installation including switchgear and electric drives • Exposure to Hazardous Area installations • Commitment to Zachry values and safety rules and regulations • Instrument calibrations including ultrasonic flow meter, level transmitters, temperature transmitters, pressure transmitters etc. • A working knowledge of BS/IEC/ISO/API/ATEX/EEMUA codes and standards relating to electrical and instrumentation work • Working knowledge of construction standards, codes of practice and regulations/legislation relating to electrical and instrumentation work • Must have good aptitude and manual dexterity • Proficient in the use of Microsoft Office Package. Familiar with other computer packages (e.g. MS Project, Outlook, Bluebeam, etc.) • Ability to perform well under pressure • Ability to work with others - team player • Good communication skills with co-workers and supervisors Work Environment: Will work in all weather conditions ranging from warm/hot - cool/cold. Occasional rain. Will work at different elevations. May be required to work in close, confined spaces for a long period of time. Noise levels will be moderate to high. ZACHRY is dedicated to providing a Safe and Drug-Free work environment and is an Equal Opportunity Employer. #LI-KS1 Responsibilities: • Executes the specific inspections on materials, equipment and construction/installation activities on site. • Issues the relevant Quality Records and, when necessary, writes and sends to QC Supervisor non-conformances reports. • Checks cable laying and cable identification. • Performs punch-listing operations. • Checks power transformers, switchboard, accumulator battery, sockets outlet, lighting system. • Performs visual inspections, dimensional test, checks rating and material for connection. • Witness tests of continuity, insulation resistance. • Checks installation of instruments. • Performs tests functional instruments. • Checks fiber optic cable. • Performs test communication functionalities. • Verify special processes and the relevant workers' qualifications. • Witness the tests, controls and inspections carried out. • Check conformity with the Quality Control Plan, obtain the relevant documentation, verifies procedures and equipment to be used in tests, controls and inspections, manage documents certifying tests, controls and inspections.

QC Inspector I&E will assist management in establishing project requirements for selecting the proper procedures and techniques for project quality control in the I&E segment of the project. Performs pre-installation inspections as required including materials, wire size, routing, tubing size, fittings, raceway, supports, and ties storage to ensure the compliance to the project specifications, governing codes, and/or manufactures recommendations. Documents inspection activities on the correct forms, checklist, or media approved the by the projects ITP or SOP.

Thompson Engineering is a leader in delivering high-quality infrastructure and construction projects across the South. With a strong commitment to safety, quality, and client satisfaction, we are currently seeking a dedicated and experienced Civil QA/QC Inspector to join our growing team. The Civil QA/QC Inspector will oversee the quality assurance and quality control aspects of civil construction work including earthworks, concrete, asphalt, utilities, drainage, and structural components. The ideal candidate will be responsible for ensuring that all construction activities comply with applicable codes, standards, project specifications, and quality plans. The Ideal candidate must be willing to travel to support project needs. Essential Functions of the Position * Conduct QA/QC inspections for all civil construction activities, including but not limited to earthwork, foundation, concrete placement, utilities, roadways, and structural components. * Review and interpret project drawings, specifications, and quality requirements. * Prepare and maintain daily inspection reports, test results, non-conformance reports (NCRs), and corrective action documentation. * Monitor construction work to ensure compliance with approved inspection and test plans (ITPs). * Coordinate with contractors, site engineers, consultants, and quality managers to address any quality-related issues. * Verify materials and workmanship meet the project's approved submittals and standards. * Attend quality and coordination meetings as needed. * Ensure that all inspection and testing records are properly documented and archived. * Support continuous improvement by identifying recurring quality issues and suggesting practical solutions. Minimum Requirements * High School Diploma or GED required; Associate's or Bachelor's degree in Civil Engineering, Construction Management, or related field preferred. * Minimum of [3-5] years of experience in civil construction QA/QC, preferably in infrastructure or large-scale projects. * In-depth knowledge of industry standards and codes (ASTM, ACI, AASHTO, etc.). * Experience reviewing and implementing Inspection and Test Plans (ITPs) and Quality Control Plans (QCPs). * Familiarity with construction materials and laboratory/field testing procedures. * Strong organizational and communication skills. * Proficiency with Microsoft Office Suite and QA/QC reporting tools. * Valid driver's license and the ability to travel to project sites. Preferred Certifications (Not Required, but a Plus): * ACI Concrete Field Testing Technician - Grade I * NICET Certification in Civil/Construction Inspection * OSHA 10 or 30 Certification * ISO 9001 Quality Management Systems knowledge * QMS/QA-related training or certifications Physical Requirements * Must be willing to work flexible schedules and overtime as needed by the department needs. * Ability to lift and carry a minimum of 40 lbs. * Drive a company vehicle in a safe manner * Walk, stoop, bend, and climb up and down stairs and ladders * Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel. * Work in high grounds and high open buildings * Work outside for extended periods in the heat and cold * Ability to wear appropriate PPE for hazardous materials * Ability to read and write in English About Thompson Engineering Thompson Engineering was established in 1953 in Mobile, Alabama. Since then, the company has grown to include multiple offices in states throughout the Southeast. Thompson Engineering is a subsidiary of Thompson Holdings, Inc. Our sister companies are Watermark Design Group, an architectural and interior design firm, and Thompson Consulting Services, a disaster recovery consulting firm. As a group, the three firms provide a broad range of architectural and engineering services. Thompson is an employee-owned firm with more than 300 personnel in multiple disciplines. Our staff has a vested interest in providing safe, quality driven, successful projects that are completed on time and within budget. Our business relies heavily on our performance and the repeat satisfaction of our customers. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job Title: Distribution Inspector 3Location: Rio Grande Valley Service Area/El Paso Service AreaKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Ensure all inspections meet or exceed industry regulations and standards. Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. Strong communication skills with the ability to work effectively in a team environment. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-IF1

Job Level: Mid Level Home District/Group: South Central District Department: Quality Market: Transportation Employment Type: Full Time As a Quality Technician, you play a key role in supporting strategic infrastructure projects across Texas, Louisiana, and Mississippi. These initiatives include the development of AI data centers, improvements in energy reliability, and enhancements to community resilience. Working closely with both the Infrastructure and Power teams, you serve as a quality control focal point, helping ensure that project execution aligns with established standards and requirements. Your responsibilities include acting as a liaison between departments, supporting team members, and developing a strong understanding of the project scope and schedule as it relates to your assignment. Through collaboration and precision, you help ensure that these projects are built to last and meet the highest standards. District Overview Kiewit's South Central District is one of Kiewit's leading infrastructure districts specializing in heavy civil, transportation, and water resource markets. Projects you could be working on could include mass grading, drainage, paving, utility and more. Although most of our work is regionally based in the south-central region of the United States, we also pursue various projects stretching across the United States. We are looking for individuals who are passionate about infrastructure and committed to the construction industry as opposed to design. Location This position will support our civil scope on large scale data center projects in TX. Project sites include Abilene and El Paso TX. Responsibilities * Perform testing on aggregates and asphalt for material properties for conformance to requirements. * Support team members in their roles as a program focal point for quality control, acting as a liaison with other functional departments. * Develop a thorough understanding of the project scope and schedule as they relate to his/her specific assignment. * Understanding of TXDOT and local municipality specifications * Report test results to upper management and recognize failing materials * Ability to understand asphalt and aggregate properties Qualifications * Degree in Geology, Civil Engineering or related field preferred * Self-starter with exceptional organization and interpersonal skills * Working knowledge of the specific trade of discipline (i.e. civil, structural, electrical) as assigned, with associated special processes, inspection and testing techniques - preferred * Working knowledge of construction industry preferred * Certifications issued from ACI, AGG101, SB101, SB102, Level 1A, 1B and level 2 preferred. Training provided and ability to obtain certifications within 6 months. * Ability to gain additional certifications to support project testing and inspection * Capability to work extended construction hours during high seasons and potential night shifts. * Ability to work as a team, strong communication skills, evaluating technical documents, some experience in a lab preferred. #LI-SS1 Other Requirements: * Regular, reliable attendance * Work productively and meet deadlines timely * Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment. * Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. * Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. * May work at various different locations and conditions may vary. We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status.

Key Accountabilities: * Accurately inspect raw materials and products visually, as well as with gauges, scales, or other measurement instruments as required and according to work instructions. * Segregate non-conforming parts or material. * Complete required documentation for work performed. * Perform data entry of work results into appropriate databases. * Perform final inspection to reconcile outgoing shipments, as required. * May be required to identify causes of non-conformance. * This is a position that works directly on the warehouse floor on or around heavy machinery. * Meet TKMNA Employee Attributes / Competencies. The above is intended to describe the general content of and requirement for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or requirements. This position has been identified as "safety sensitive" by thyssenkrupp under applicable laws. Accordingly, any application for this position that is considered for employment with thyssenkrupp requires successful completion of pre-employment drug testing, which may include testing for marijuana in accordance with any applicable federal, state, and local laws. Qualifications: Minimum Requirements: * High school diploma or equivalent * Ability to read and write English and perform basic math problems * Ability to learn correct use of basic measurement instruments (tape measure, scales, gauges) * Basic computer knowledge to complete data entry * Attention to detail and accuracy * Ability to accurately inspect basic material, commodities, and/or processes * Safety Mindset. Preferred requirements: * Some college courses or certificates in Quality Assurance-related field of study * Prior experience using basic measurement instruments * Prior experience in a quality assurance inspection position Job Compensation Starting at $20.00 Benefits Overview We offer competitive company benefits to eligible positions, such as: * Medical, Dental, Vision Insurance * Life Insurance and Disability * Voluntary Wellness Programs * 401(k) and RRSP programs with Company Match * Paid Vacation and Holidays * Tuition Reimbursement * And more! Benefits may vary based on job, country, union role, and/or company segment. Please work with your recruiter or tk representative for applicable benefits information. Disclaimer This is to notify the general public that some individuals/entities are using the thyssenkrupp ("TK") name, trademark, domain name, and logo without authorization. They are posing as employees, representatives, or agents of TK and its associated/group companies. These individuals/entities are fraudulently offering jobs online through texts, websites, telephone calls, emails, or by issuing fake offer letters. They are also soliciting jobseekers to deposit money in certain bank accounts or providing jobseekers with fraudulent checks to obtain banking information. TK does not ask, solicit, or accept any monies in any form from candidates, job applicants, or potential jobseekers, who have applied to or wish to apply to TK, whether online or otherwise as a pre-employment requirement. TK bears no responsibility for money being deposited/withdrawn therefrom in response to such fake offers. TK does not: 1. Send job offers from free email services like Gmail, Rediffmail, Yahoo mail, etc.; 2. Request payment of any kind from prospective jobseekers or candidates for employment; 3. Authorize anyone to collect money or agree to any monetary arrangement in return for a job at TK; 4. Send checks to job seekers; or 5. Make job offers through third parties. In the event TK uses professional recruitment services through a third party, offers are always made directly by TK and not by any third parties. PLEASE NOTE: 1. TK strongly recommends that potential jobseekers do not respond to such fake solicitations, in any manner; 2. TK will not be responsible to anyone acting on an employment offer that is not directly made by TK; 3. Anyone making an employment offer in return for money is not authorized by TK; and 4. TK reserves the right to take legal action, including criminal action, against such individuals/entities. TK follows a formal recruitment process through its own HR department and applications are evaluated by its HR department through pre-defined processes. Please visit our official careers website at ******************************** to view authentic job openings at TK. If you receive any unauthorized, suspicious, or fraudulent offers or interview calls, please email us at **********************************************. We shall not accept any liability towards the representation made in any fraudulent communication or its consequences, and such fraudulent communication shall not be treated as any kind of offer or representation by TK or its group companies and affiliates. Company With around 480 locations in over 40 countries, thyssenkrupp Materials Services is the biggest materials distributor and service provider in the western world. The broad service spectrum offered by the materials experts enables customers to focus on their individual core business. The area of Materials Services spans two strategic areas: global materials distribution as one-stop-shop - from steel and stainless steel, tubes and pipes, nonferrous metals and specialty materials to plastics and raw materials - and tailored services in the areas of materials management and supply chain management. An extensive omnichannel architecture offers 250,000 customers worldwide cross-channel, round-the-clock access to more than 150,000 products and services. A highly efficient logistics system ensures that all requested services are smoothly integrated into customer production processes "just-in-time" or "just-in-sequence. Copper and Brass Divison Sales is a distributor and processor of aluminum, stainless steel, copper, brass, bronze and more quality materials serving markets across North America, including Canada and Mexico. By providing customers with what they want, when they need it, Copper and Brass Sales is able to help them succeed in today's challenging global business environment. The company's focus on the Aerospace, Automotive, Electrical, Medical and Oil & Gas Industries allows them to offer these market segments expertise specific to their needs. The daily commitment of its employees to provide premium service focused on the customer first has earned Copper and Brass Sales the position of a respected leader in the nonferrous metals industry for over 80 years. We value diversity Diversity promotes appreciation of all the individual strengths and differences in the workforce; it is a driver and an expression of our corporate culture. We feel companies that give equal support to all employees regardless age, disability, ethnicity, gender/gender identity or sexual orientation enjoy important competitive advantages and are more efficient. So we can harness diversity to the benefit of employees and the company. What's more, greater diversity leads to greater innovation in the company. thyssenkrupp Materials NA Inc. and the affiliated group companies and business units including Copper and Brass Sales, Engineered Plastics, Ken-Mac Metals, OnlineMetals, thyssenkrupp Steel Services, thyssenkrupp Supply Chain Services, and thyssenkrupp Materials de Mexico. Also including thyssenkrupp Materials Trading NA, LLC and thyssenkrupp Materials, LLC (Aerospace) are equal opportunity employers. Qualified applicants will receive consideration for employment without regard to age, sex, race, color, religion, national origin, genetics, disability, gender identity, marital status, sexual orientation, veteran status or any other protected characteristic required by applicable law. Applicants with disabilities who require reasonable accommodation in connection with the application process are encouraged to contact us directly.

FXI is a leading producer of foam innovation in the Bedding, Furniture, Industrial, Home & Office, Healthcare, and Transportation markets. We have made it our mission to provide tailored solutions that delight our customers and consumers. With our corporate headquarters, high-tech research and development facility, and multiple manufacturing locations in North America, FXI has built a culture of innovation and achievement that is recognized by customers, suppliers and peers. Our products include finished goods, sub-assemblies, services, and raw materials for OEMs, fabricators, and retailers. You will find FXI's foam innovations inside, around, and under yourself in countless applications. Everywhere foam goes, FXI's innovations lead the way! Won't you join us? Responsibilities: * The incumbent technician will be an integral part of manufacturing processes working directly with associates and leads in a work cell. * They will prepare all required FXI and customer documentation to provide visibility of product status. * REQUIRED SKILLS & EXPERIENCE: Monitor Fabrication & Manufacturing processes to determine products are meeting requirements and specifications. * Compliance with all plant rules. * Detail oriented with strong organizational skills. * Assist Quality Manager with maintenance of Quality Management System, Procedures (SOP) and Work Instructions (WI). * Working knowledge of metrics, KPI's and the ability to update associated logs and files. * Strong communication skills both written and verbal to address customers, suppliers, and FXI associates. * Previous manufacturing or testing experience. * Follow appropriate Standard Operating Procedures (SOP), Work Instructions (WI) and safety procedures. * Proficient use of MS Products; Excel, Word, PowerPoint, and Outlook. * Duties as assigned by Quality Manager. * Interface with Suppliers to address defective material. * Ability to perform with minimal supervision including multi-tasking capabilities. * SAP; part number search, create inspection plan & lot, material hold & release transactions. * Review and disposition of nonconforming product. * Ability to use standard measuring tools including but not limited to tape measure, 6" scale, caliper, micrometer, weigh scale and height micrometer. Qualifiations: * High School diploma or GED required. * Certification or Associate's degree in Quality, Engineering, Science, or related field. * TECHNICAL SKILLS: Generate and communicate fabrication & manufacturing status using graphs and data reports. * Strong analytical skills. * Working knowledge of SPC and software. * Problem Solving and root cause analysis methodologies. * Assign corrective action, update non-conformance systems and maintain associated records. * Ability to read and interpret customer requirements and part prints. * Understanding and application of Process Flow, FMEA and Control Plan. * Internal Auditor skills; ISO 9001 AS9100. * Direct experience within industry including but not limited to ISO, AS, TS management systems and documented training in one or more areas as: technician, inspector and/or auditor.

Quality Assurance Tech I - (2 nd Shift) Duration : 12 Months contract Total Hours/week : 40.00 2 nd Shift Client: Medical Device Company Level Of Experience: Entry Level Employment Type: Contract on W2 (Need US Citizens Or GC Holders Only) 2nd Shift (2:00 PM - 10:00 PM) Job Description: Quality Control is responsible for the efficient and effective performance of testing in conformance with regulations and standards. Demonstrates limited, entry-level experience. Completes routine tests. Works within clearly defined SOPs and/or scientific methods. Adheres to quality guidelines. Works with a high degree of supervision. Complies with regulations and standards. Identifies basic non-compliance within regulations and standards. Entry level is with limited experience. Develops skills in basic tasks, techniques and procedures within one skill area / process / method. Maintains appropriate licenses / training / certifications, as needed. Applies basic knowledge and skills to complete routine tasks consisting of prescribed steps. Has basic skills training in an analytical / scientific method or operational process area (e.g., material handling and management, logistics, manufacturing production). Works within clearly defined SOPs and / or scientific methods and adheres to quality guidelines. Works with a high degree of supervision. About Client: Client, a leading global medical technology company that makes and sells medical devices, instrumented systems and reagents, is dedicated to improving people's health throughout the world. The Company's capabilities are instrumental in combating many of the world's most pressing diseases. Founded in 1897 and headquartered in Franklin Lakes, New Jersey, Client employs more than 25,000 people in approximately 50 countries throughout the world. The Company serves healthcare institutions, life science researchers, clinical laboratories, industry and the general public. It was one of the first companies to sell U.S.-made glass syringes. It was also a pioneer in the production of hypodermic needles and ranked #195 in the 2019 Fortune 500 list. It was also listed among the top 100 companies in Newsweek's 2009 Green Rankings. Ranking of the 500 largest American corporations based on environmental performance, policies, and reputation. Placed third in the health care sector and 83rd overall Thanks & Regards , Edwin George || Millenniumsoft Inc. 8301 Arlington Blvd, Suite # 504, Fairfax, VA 22031 ************ X105 (Direct) Fax : # ************ ************************ ********************** An E -Verified Corporation WBE Certified (State of Virginia) NOTE: "Under Bill s. 1618 Title III passed by the 105th U.S. Congress this mail cannot be considered spam as long as we include a way to be removed from our mailing list. Simply send us an e-mail with REMOVE in the subject and we will gladly REMOVE you from our mailing list."

Job Purpose: Inspects finished products, products being processed, incoming materials, parts, and assemblies for conformance to company standards. Conducts routine and non-routine analysis of raw materials, in process and finished product, using a variety of testing devices and procedures to maintain product quality. Responsibilities include but are not limited to the following: This position is for a 2nd shift only! Proficient in the use of Inspection tools such as caliper, micrometer, height gage, optical comparator, pin and thread gages. Ability to determine if components meet specifications according to a 2D drawing. Ability to run programmed components and follow documented procedures using the CMM (Coordinate Measurement Machine) Able to make manual measurements using the CMM, such as hole locations and flatness Accept help and have the ability to learn from Senior Quality Technicians and engineering Document inspection results using FMP (receiving inspection reports, FA reports, NCMR) Post accepted components into inventory using Mass 500. Maintain proper part count for inventory control. Basic knowledge of products and production processes Follows Inspection Processes and procedures Understands all aspects of GCX quality guidelines and expectations Represent Quality Assurance during VOC inspection of finished goods Job Requirements: Ability to read and understand complex blueprints. Ability to accurately measure parts using precision hand tools. Strong communication skills. (Written and verbal English) Strong attention to details. Basic computer literacy (Microsoft Excel, Word, etc.) Basic Math & Analytic Skills.

At Bosch Mobility Aftermarket, we believe in creating a work culture that embodies our core values of grow, enjoy, and inspire. Our Mobility Aftermarket division provides diagnostic and repair shop equipment, spare parts, and repair solutions for passenger cars and commercial vehicles worldwide. Our Automotive Service Solutions operations supply testing and repair-shop technology, diagnostic software, service training, and information services. As a member of our team, you will have the opportunity to grow your skills and knowledge while working with cutting-edge technology. We want you to enjoy what you do and feel inspired to contribute your best to our customers and to the growth of our business. We believe that by cultivating a work environment that encourages personal and professional growth, enjoyment, and inspiration, we can achieve great things together. Join us at Bosch Mobility Aftermarket and help us shape the future of mobility! Job Description * Analyze and verify products according to specifications and technical drawings * Perform visual and dimensional inspections for incoming products, shelf lifetime requalification, damaged items, customer returns / complaints * Update quality indicators * Monitor and control blocked parts in the warehouse. * Manage scrapped parts due to quality problems * Create reports and nonconformity notifications. * Manage measuring equipment (e.g., calibration control). * Perform part sorting / selection according to established norms and standards. * Support the review of process instructions and other quality system documents. Qualifications * High School Diploma / GED * 1.5 years of verifiable experience in the Quality area in product handling, with knowledge of measuring equipment (e.g., calipers) * Proficiency in measuring and testing devices including calipers. * Computer skills including proficiency with Microsoft office. * Job requires the ability & willingness to communicate regularly & effectively with coworkers. * Experience driving a forklift. Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization is not available. Additional Information Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. Comprehensive Benefit Offering - All benefits are effective DAY 1! * Medical, Dental & Vision * Life and Supplement Life * Long and Short Term Disability (after 30 days) * Paid Time Off & Holidays * 401K - with generous company match * In addition to 401K, additional retirement benefit 100% company paid * Annual bonuses * Tuition Assistance * Paid Volunteer Time * Associate Discounts on Bosch products like home appliances, powertools, thermal products like tank-less water heaters and more

Description SEWS-El Paso Customer Service Center (Eastside) Job Title QA Technician (Hourly Position) Job Duties and Responsibilities Follow up with the inspections and sorting of FG materials Work close with the sorting company for good instructions and sorting methods Observe and ensure all the safety rules are followed by the QA members and sorting company Develop standard or visual aid and reports for sorting purposes Help during the ISO/TS internal and external audits Propose changes on ways and procedures in order to make the process more efficient and accurate Close contact to the manufacturing plants in Mexico for feedback on quality issues Ensure FG material conditions are correctly identified and meet with all customer requirements Judgement of Good and No Good part using measurement tools and repair of defects based on skill level/hierarchy Support to material handler to move material using forklift Perform the Tear Down Inspection to the wire harnesses All other duties assigned Qualifications Bilingual, English and Spanish preferred Available to travel between the US and Mexico, Valid Passport needed Excellent dimensional skill and detailed oriented (basic knowledge of international metric system and usage of measurement instruments (measure tape, caliper, etc.) Basic knowledge of MS Excel Disposition to work Overtime in short notice Ability to drive forklift Excellent communication skills Minimum of 3 years experience in a similar Quality Assurance duties and ISO/TS16949 preferred About Sumitomo Electric Wiring Systems, Inc.Sumitomo Electric Wiring Systems, Inc. (SEWS) is part of the Sumitomo family of companies, a 400 year old brand with a reputation for quality and reliability. With the support of facilities throughout North America, SEWS has been delivering innovative solutions to automakers for over 30 years, and is a leading supplier of electrical distribution systems, components and electronics. SEWS is committed to technical development worldwide and with a global network of resources, is able to deliver a truly competitive advantage to each of our customers. Our associates are what drive Sumitomo's continued growth, which is why we proudly offer a competitive salary and comprehensive benefits package, including Medical, Dental, Vision, Disability, Life, 401(k) with match, tuition benefits, paid holidays and vacation.To learn more about us, please visit *************** Follow Us on LinkedIn: ***************************************************************** About the Sumitomo Electric GroupSince the founding of Sumitomo Electric Industries, Ltd. in 1897 with copper wire production, we have developed many new technologies and products through innovative R&D activities based on Sumitomo Electric manufacturing technologies for electric wires and power cables. With more than 350 subsidiaries worldwide, we continue to introduce a wide variety of products that fulfill the expectations of society, in five business fields: Automotive, Information & Communications, Electronics, Environment & Energy, and Industrial Materials. We are a Fortune global 500 company. To learn more about Sumitomo Electric Group, please visit ********************** Follow Us on LinkedIn: ************************************************* **Interested Candidates Should Submit Cover Letter and Salary History When Applying.**

Tradesmen International is immediately hiring skilled Quality Control Technicians for projects located in El Paso, TX. This is a first shift opportunity and the pay rate is up to $35/hour based on experience and skill level. If you are a Quality Control Technician eager to master your skills while working alongside our accomplished Craft Professionals, this is your chance to advance your career! Job Scope: * Meet at meeting spot every morning to go over daily schedules * Drive to specific location on the wall border and inspect vertical construction of the wall ensuring that all work is complete to specifications * Write a daily report and enter into system using Microsoft Excel * Other related tasks assigned Requirements * Must be able to pass a federal background check with fingerprints * Must have clean driving record * Must have 6+ years of commercial/civil construction experience * OSHA 10 is required and OSHA 30 is a plus Company Details Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: * Tradesmen+ Rewards Program - earn points for hours worked * Vacation Pay * Health insurance * 401(k) profit-sharing savings plan Find our app, TradeGig, in the App store to see opportunities, set notifications and click to express interest! Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen's full website. Recruiter Name Alivia Tedeschi Location US-TX-EL PASO

at Sumitomo Electric Wiring Systems, Inc. SEWS-El Paso Customer Service Center (Eastside) Job Title QA Technician (Hourly Position) Job Duties and Responsibilities Follow up with the inspections and sorting of FG materials Work close with the sorting company for good instructions and sorting methods Observe and ensure all the safety rules are followed by the QA members and sorting company Develop standard or visual aid and reports for sorting purposes Help during the ISO/TS internal and external audits Propose changes on ways and procedures in order to make the process more efficient and accurate Close contact to the manufacturing plants in Mexico for feedback on quality issues Ensure FG material conditions are correctly identified and meet with all customer requirements Judgement of Good and No Good part using measurement tools and repair of defects based on skill level/hierarchy Support to material handler to move material using forklift Perform the Tear Down Inspection to the wire harnesses All other duties assigned Qualifications Bilingual, English and Spanish preferred Available to travel between the US and Mexico, Valid Passport needed Excellent dimensional skill and detailed oriented (basic knowledge of international metric system and usage of measurement instruments (measure tape, caliper, etc.) Basic knowledge of MS Excel Disposition to work Overtime in short notice Ability to drive forklift Excellent communication skills Minimum of 3 years experience in a similar Quality Assurance duties and ISO/TS16949 preferred About Sumitomo Electric Wiring Systems, Inc.Sumitomo Electric Wiring Systems, Inc. (SEWS) is part of the Sumitomo family of companies, a 400 year old brand with a reputation for quality and reliability. With the support of facilities throughout North America, SEWS has been delivering innovative solutions to automakers for over 30 years, and is a leading supplier of electrical distribution systems, components and electronics. SEWS is committed to technical development worldwide and with a global network of resources, is able to deliver a truly competitive advantage to each of our customers. Our associates are what drive Sumitomo's continued growth, which is why we proudly offer a competitive salary and comprehensive benefits package, including Medical, Dental, Vision, Disability, Life, 401(k) with match, tuition benefits, paid holidays and vacation.To learn more about us, please visit *************** Follow Us on LinkedIn: ***************************************************************** About the Sumitomo Electric GroupSince the founding of Sumitomo Electric Industries, Ltd. in 1897 with copper wire production, we have developed many new technologies and products through innovative R&D activities based on Sumitomo Electric manufacturing technologies for electric wires and power cables. With more than 350 subsidiaries worldwide, we continue to introduce a wide variety of products that fulfill the expectations of society, in five business fields: Automotive, Information & Communications, Electronics, Environment & Energy, and Industrial Materials. We are a Fortune global 500 company. To learn more about Sumitomo Electric Group, please visit ********************** Follow Us on LinkedIn: ************************************************* **Interested Candidates Should Submit Cover Letter and Salary History When Applying.**

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR RA4u3Dt3hL

Job Description At Stampede Culinary Partners in Sunland Park, NM, we don't just offer jobs-we offer careers with purpose. When you become our full-time Food Quality Control Technician, you'll be a key player in ensuring the safety, quality, and consistency of our products. We offer: Competitive pay Health, dental, and vision insurance HSA/FSA options Short- and long-term disability coverage (STD/LTD) Life and AD&D insurance Accident insurance Group hospital indemnity insurance Pet insurance 401(k) with company match Pension plan after 1 year Floating holidays Mental health support program Employee discounts on meat and veggies Event BBQs and recognition programs On-site parking and bus route access SCHEDULE: This is a full-time 2nd shift position, working Monday through Friday from 2 PM to 10 PM, with frequent overtime opportunities based on production needs. DAY-TO-DAY: As our Food Quality Control Technician, you are the last line of defense between our products and the customers who trust us. Your day starts with pre-operational inspections to ensure the production lines are ready. You'll be responsible for monitoring product quality, conducting tests on seasonings, batters, breading, and marinades, and randomly pulling products off the line to check weight, length, and thickness against customer specifications. Every hour, you'll perform metal detection checks, box weight tracking, and organoleptic testing (cooking and tasting products) to guarantee that our food meets safety and quality standards. You'll manage critical documentation, work closely with U.S.D.A. and S.S.O.P. requirements, and train backup QC Technicians to ensure seamless operations. Your role also includes enforcing GMP practices across the plant and participating in weekly QA meetings to stay ahead of industry developments. Every decision you make protects our brand's reputation and ensures our customers receive only the best. Your work truly matters. QUALIFICATIONS: Proficiency with computers Adherence to quality and safety guidelines Physical ability to stand, walk, kneel, and lift up to 25 lbs in a cold, loud, and fast-moving production environment Basic math skills with the ability to use a calculator to determine percentages and averages Great communications skills, both written and verbal Strong organization and time management skills Team player Experience in the food industry is preferred but not required for this Food Quality Control Technician role. JOIN US! Stampede Culinary Partners, Inc. is an innovative protein solutions company that focuses on custom protein development and processing. Our customers include leading restaurants, top retailers, leading food service distributors, home delivery customers, and other emerging segments. The ability to satisfy our mission depends largely on our greatest asset, our employees! Our company culture is built on the expertise and experience of all our employees and driven by the 5 pillars that we hold ourselves to daily: perform passionately, challenge directly and respectfully, commit to teamwork, and embrace innovation. Ready to become our Food Quality Control Technician? Just fill out the initial 3-minute, mobile-friendly application! Job Posted by ApplicantPro

BCforward began as an IT business solutions and staffing firm. Founded in 1998, BCforward has grown with our customers' needs into a full service personnel solutions organization. BCforward's headquarters are in Indianapolis, Indiana and also operates delivery centers in 20 locations in North America as well as India and Puerto Rico. We are currently the largest consulting firm and largest MBE certified firm headquartered in Indiana. Job Description Quality Assurance Technician II El Paso, TX, USA, 79907 Pay Rate: $11.00/hr Qualifications- Required Skills Technician degree in a Quality/Engineering discipline Experience and knowledge of Acceptance Sampling Plans and table usage. Must be able to read and interpret mechanical drawings Proficient in the use of mechanical inspections equipment including calipers, micrometers, go/no go gages, and other mechanical inspection equipment. Ability to prioritize inspection workload Detail oriented and excellent organization skills Strong communication skills - written and verbal. Ability to work under pressure in a fast paced environment Experience working with ISO Quality Systems Must have experience with MS Office platforms (excel, word, etc.) Desired Skills Minimum of 3 years of mechanical inspections experience Able to discuss technical problems encountered with manager, engineering or purchasing staff. Visual inspection experience Job Summary Perform inspections and tests on incoming material, in process and finished product to ensure that quality standards and process controls are being met throughout the manufacturing and configuration process. Generate the appropriate documentation, records and reports. Support Quality, engineering and manufacturing teams as needed. Job Responsibilities Perform Visual/Dimensional inspections, incoming, in process and final inspections as required Inspection and testing of parts for compliance to drawings and/or specifications, detailed documentation of results, generation of certificate of compliance and proper maintenance of records. Generate NCMR reports Update DHR records when needed Maintain and execute the Return Material Disposition Process Maintain IQA inspection database with required records Generate/maintain database for in process and incoming inspection information Disposition non-conforming material through the MRB process. Shift Type 1st Shift Sandra Taylor ************ Additional Information Sandra Taylor ************

Assists management in establishing project requirements for selecting the proper procedures and techniques for project quality control in civil/structural segment of the project. Assists in training and testing craft personnel on proper techniques and procedures. Perform rebar, form, concrete, earthwork structural steel inspections throughout the site to ensure the quality of the work conform to the project specifications and governing codes. Must have 5+ years' experiences as a Civil Journeyman/Structural Journeyman. Must have extensive knowledge of concrete, rebar, and underground activities, foundation, structural and construction materials, and processes used for each activity. Required Qualifications - Essential Skills, Knowledge, and Abilities: • Must have good aptitude and manual dexterity • Good reading comprehension • Ability to work with others - team player • Good communication skills with co-workers and supervisors • Commitment to Zachry values and safety rules and regulations Preferred Qualifications: • Current Zachry or Zachry ROF'ed employee. • Former experience working with Zachry Industrial, Inc. • Former QC experience. Reports to Position: No Direct reports Physical Requirements: • Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. • Will talk and hear to communicate. • Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. • May be required to pick up, lift, carry and move up to 50lbs • Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements. • Must be able to work in all weather conditions (including heat, rain, cold, and wind) while wearing appropriate PPE. • Will be required to wear personal protective equipment (PPE) including but not limited to : hard hat, safety glasses/spoggles, ear plugs, masks/respirators, hi-vis safety vest, leather gloves and leather steel-toed work boots. Work Environment Employee will work in multiple environments on site. Work site noise levels will be moderate to high. Job site will contain: light to heavy equipment vehicles, small to large equipment, materials, communication equipment and tools, people standing, walking, sitting, signaling and talking, bells, whistles and alarms. The above description covers the fundamental responsibilities of the Quality Control Civil/Structural Inspector position. It shall not be construed as a complete listing of all miscellaneous, incidental or similar duties which may be required from day- to -day. Zachry Group is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer. #LI-KS1 Qualifications: • Review project requirements, determines minimal requirements and procedures, schedules and coordinates required examinations, inspections, or tests for the discipline or project segment assigned to. • Perform examinations, inspections, or tests as required by project management and/or client/owner. • Coordinates training, craft testing and/or trains personnel regarding required construction procedures and proper use of tools, instruments, etc. • Provides technical assistance to project management in selecting optimum construction procedures and/or techniques to meet project specifications. • Provides technical assistance to project management regarding the selection of tools, instruments, and test equipment to assist in the project quality control effort. • Assists project management in selection and/or testing of personnel to perform specific work activities to assist in ensuring work meets project requirements. • Schedules examinations, inspections, or tests as required by project. • Coordinates examination, inspection, and test plans with project management and client representatives. • Completes and maintains inspection, test, examination, and Quality Control Records. • Assures implementation of job site Q.C. Program.

Assists management in establishing project requirements for selecting the proper procedures and techniques for project quality control in civil/structural segment of the project. Assists in training and testing craft personnel on proper techniques and procedures. Perform rebar, form, concrete, earthwork structural steel inspections throughout the site to ensure the quality of the work conform to the project specifications and governing codes. Must have 5+ years' experiences as a Civil Journeyman/Structural Journeyman. Must have extensive knowledge of concrete, rebar, and underground activities, foundation, structural and construction materials, and processes used for each activity.