RESPONSIBILITIES:
Responsibilities may include some or all of the following: Maintain accurate and up-to-date acceptance and rejection records and/or certifications systems as required by the applicable specifications. Determine acceptance or rejection after inspection and/or calibration of parts, tools, instruments or x-ray film. Identify defective conditions and test failures and prepare all appropriate documentation and/or calibration history. INSPECTION Perform semi-complex inspection on detailed machined parts using a wide variety of measuring instruments to determine acceptability or rejections of parts and/or parts finish. Adapt and develop inspection set-ups to check sample parts, forgings and castings. Check tool and jig layouts. Perform first article and envelope inspection, source inspections, and/or semi-complex surface plate set-ups. Interpret specifications, charts, manuals and other data to arrive at acceptance or rejection. Use mathematics to convert blueprint dimension and tolerances. Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements and military standards. Layout and measure hole locations and centerlines on castings, forgings, and machine parts to maintain control of machining cycle during manufacture. Determine acceptance or rejection after inspecting parts, tools, instruments or x-ray film. Identify causes of defective conditions and test failures and prepare all appropriate documentation. Investigate cause of customer return failures. Perform inspections to applicable specifications within assembly, test and shipping departments. Assist customer/government source inspectors as necessary. CALIBRATION Perform calibration on various types of semi-complex measuring and test equipment. Set-up calibration test conditions interpreting calibration procedures, specifications, manufacturing instructions or related documents.
Document and evaluate historical data to determine calibration intervals. Diagnose and calibrate newly acquired equipment. NONDESTRUCTIVE TEST Perform daily, weekly and monthly equipment and material checks. Perform pre-inspection and post-inspection cleaning. Set-up equipment and conduct tests of a semi-complex scope. Perform complete inspections in accordance with the applicable specifications, standards and other contractual documents. Interpret, evaluate and document inspection results in accordance with approved procedures. Observe all prescribed safety rules and regulations and maintain a FOD free work area. Perform other related responsibilities.
Job Requirements:
⦁ Three years related inspection, calibration, or NDT experience or demonstrated ability to perform described responsibilities.
⦁ May be required to be certified as a Level II Nondestructive Test Inspector in two or more disciplines.
⦁ Certification must be in accordance with MIL-STD-410 and PES1-29.
⦁ Preferred experience of CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5.
⦁ Knowledge of applicable military standards or specifications required.
⦁ Proficient in reading and interpreting blueprints, customer's specifications and internal drawings and procedures. Possess working knowledge of shop mathematics including trigonometry.
$53k-69k yearly est. 3d ago
Looking for a job?
Let Zippia find it for you.
Senior Inspector
Jobsrus.com
Quality inspector job in Irvine, CA
Inspector Senior
Job Type: Contract
Contract Length: 6+ Months
JobsRUs.com. is seeking to hire a Inspector Senior for our client in Irvine, CA!
Benefits Available!
Weekly Pay!
$40.25/Hour
Shift Details: 1st shift
DESCRIPTION:
With limited guidance in a team environment, responsible for various semi-complex inspection requirements.
Responsibilities may include some or all of the following:
Maintain accurate and up-to-date acceptance and rejection records or certifications systems as required by the applicable specifications.
Determine acceptance or rejection after inspection or calibration of parts, tools, instruments or x-ray film.
Identify defective conditions and test failures and prepare all appropriate documentation or calibration history.
INSPECTION Perform semi-complex inspection on detailed machined parts using a wide variety of measuring instruments to determine acceptability or rejections of parts or parts finish.
Adapt and develop inspection set-ups to check sample parts, forgings and castings.
Check tool and jig layouts.
Perform first article and envelope inspection, source inspections, or semi-complex surface plate set-ups.
Interpret specifications, charts, manuals and other data to arrive at acceptance or rejection.
Use mathematics to convert blueprint dimension and tolerances.
Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements and military standards.
Layout and measure hole locations and centerlines on castings, forgings, and machine parts to maintain control of machining cycle during manufacture.
Determine acceptance or rejection after inspecting parts, tools, instruments or x-ray film.
Identify causes of defective conditions and test failures and prepare all appropriate documentation.
Investigate cause of customer return failures.
Perform inspections to applicable specifications within assembly, test and shipping departments.
Assist customer or government source inspectors as necessary.
CALIBRATION Perform calibration on various types of semi-complex measuring and test equipment.
Set-up calibration test conditions interpreting calibration procedures, specifications, manufacturing instructions or related documents.
Document and evaluate historical data to determine calibration intervals.
Diagnose and calibrate newly acquired equipment.
NONDESTRUCTIVE TEST Perform daily, weekly and monthly equipment and material checks.
Perform pre-inspection and post-inspection cleaning.
Set-up equipment and conduct tests of a semi-complex scope.
Perform complete inspections in accordance with the applicable specifications, standards and other contractual documents.
Interpret, evaluate and document inspection results in accordance with approved procedures.
Observe all prescribed safety rules and regulations and maintain a FOD free work area.
Perform other related responsibilities.
Job Requirements:
Three years related inspection, calibration, or NDT experience or demonstrated ability to perform described responsibilities.
May be required to be certified as a Level II Nondestructive Test Inspector in two or more disciplines.
Certification must be in accordance with MIL-STD-410 and PES1-29.
Preferred experience of CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5.
Knowledge of applicable military standards or specifications required.
Proficient in reading and interpreting blueprints, customer's specifications and internal drawings and procedures.
Possess working knowledge of shop mathematics including trigonometry.
Education Required:
High School or equivalent
$40.3 hourly 3d ago
Quality Manager/ Lab Technician
Light Helmets
Quality inspector job in Carlsbad, CA
Quality Manger
LIGHT Helmets (Safer Sports, Inc.)
Carlsbad, CA (with occasional travel to supplier)
LIGHT Helmets is a cutting-edge football helmet manufacturer located in Carlsbad. We are hiring immediately for a Production Manager for our assembly operations. We are a high growth company that offers career advancement opportunities.
LIGHT is looking for a HIGHLY MOTIVATED, FOCUSED individual to be part of our fun sports-oriented team. The ideal candidate must have excellent multi-tasking skills and perform a wide variety of duties including:
· Required Experience
Minimum 2 years of experience managing Quality Assurance/Quality Control (QA/QC)
ISO 9001 certification preferred
Key Responsibilities
o Quality Oversight
Manage all quality-related aspects of our products
Oversee lot acceptance and inventory management
Develop inspection standard operating procedures (SOPs) and acceptance criteria
Monitor and ensure paint quality standards
o Vendor and Product Compliance
Manage vendor quality control procedures
Ensure product compliance with internal and external standards
o Quality System Management
Oversee internal quality systems
Maintain and update the quality management system to ensure compliance with the SEI Program Manual
Lead SEI audit preparations and communications with the auditor
o Product Testing
Coordinate NOCSAE testing (initial and annual)
Schedule testing and collaborate with production to build helmets for quality testing
Manage in-house lab testing of products
Perform routine maintenance and calibration of lab equipment
Train lab technicians on helmet and component testing procedures
Archive and manage testing data
o Training and Documentation
Train staff on quality inspection protocols
Ensure ongoing compliance through regular training
Handle documentation and reporting related to quality processes
Compensation
Base Salary $78,500-98,500
Employee Stock Ownership plan after 12 months of contiguous employment
Target Bonus 5-10% of base tied to predetermined KPIs related to defect, costs, etc.
$78.5k-98.5k yearly 1d ago
Quality Control Inspector
Solectron Corp 4.8
Quality inspector job in Fontana, CA
Job Posting Start Date 01-20-2026 Job Posting End Date 04-03-2026
Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution.
Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter.
Job Summary
To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Quality Control Inspector in USA, Fontana Ca.
Reporting to the Quality Assurance Manager, is responsible for providing quality control and assurance throughout all phases of the production process including inspections of raw materials, in-process, and final products.
What a typical day looks like:
Performs visual inspections and other specified tests of incoming materials, in-process production, and finished products to confirm product meets drawings and specifications
Uses observation and testing to identify faults in materials and manufacturing process
Documents inspection results by completing inspection reports, logs, and checklists
Communicates with supervisor to determine appropriate recommendations and remedies for questions regarding products
Maintain quality records as needed
Keeps inspection and measurement equipment operating by following operating instructions; and notifying management when repairs are necessary.
Perform other related duties as assigned
The experience we're looking to add to our team:
High school diploma or equivalent
1-3 years' experience of quality inspections in a fabrication/manufacturing environment.
Previous experience in an ISO 9001 Certified company Strong analytical, problem-solving, detail-oriented skills
Thorough understanding of the product and/or process being inspected
Ability to read blueprints, specifications, and technical documents
Excellent written and verbal communication skills
Ability to handle multiple projects while maintaining attention to detail with the task at hand
Proficient in Microsoft Office Suite or related software as needed to complete reports.
What the physical requirements are:
Prolonged periods standing and performing repetitive tasks.
Must be able to lift up to 35 pounds at times.
Dexterity and accuracy as needed to operate testing equipment or gauges.
Must be able to bend, stretch, kneel, and squat to perform inspections
Must be able to traverse production facility to conduct inspections
Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor
#LI-GB1
What you'll receive for the great work you provide:
Full range of medical, dental, and vision plans
Life Insurance
Short-term and Long-term Disability
Matching 401(k) Contributions
Vacation and Paid Sick Time
Tuition Reimbursement
Pay Range (Applicable to California)$18.33 USD - $24.75 USD HourlyJob CategoryQuality
Is Sponsorship Available?
No
Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).
$40k-49k yearly est. Auto-Apply 9d ago
Lead Roadway Inspector
Kleinfelder, Inc. 4.5
Quality inspector job in Ontario, CA
Take Your Construction Career to the Next Level! Are you ready to be challenged, make a difference, and experience professional growth in your career? Kleinfelder's Construction Services team is looking for you! From construction management and observation/inspection services to laboratory testing and materials and forensic engineering, our Construction Services market helps to develop and maintain America's infrastructure and supply chain and is a recognized industry leader with more than 25 accredited laboratories.
Step into Your New Role
Kleinfelder Construction Services is seeking an experienced Lead Roadway Inspector to perform quality assurance inspection services on transportation-related road and highway improvement projects in the Inland Empire. The Lead Roadway Inspector will be assigned a field vehicle and gas card, reporting to a construction job site(s), with the ability to work extended shifts and nights as needed. The initial assignment is for a bus rapid transit project in Ontario.
Job Duties
* Lead a team of field inspectors coordinating inspection between multiple jurisdictions and municipalities
* Perform quality assurance inspection and documentation of civil (roadway) construction activities under the direction of a Resident Engineer
* Coordinate construction activities with various property/business owners within the proximity to the project; provides verification of adherence to temporary construction easements
* Issue field directives to the Contractor; attend weekly construction meetings; coordination of the construction schedule and notifications with the public outreach team
* Coordinate Quality Assurance materials sampling and testing
* Verify the implementation of the Contractor's Quality Control Program and adherence to plans and specifications
* Prepare detailed Daily Inspection Reports, with photos, accurately reflecting the construction progress
* Measure, calculate, track, and record pay quantities for monthly estimates
* Assist in maintaining, supporting, and promoting a safe work environment while complying with applicable safety rules, policies, and procedures
* Maintain a set of field as-built drawings
* Assist the Resident Engineer with field input on change orders, RFIs, submittals and response letters to the contractor, and as-built drawings
Qualifications/Skills
* High school diploma or equivalent. Associate degree preferred.
* Minimum of ten (10) years of demonstrated experience in roadway construction inspection of highways or major public works projects including traffic control, PCC and AC paving, earthwork, grading, drainage, and signing and striping
* Knowledge and experience with equipment used in construction inspection, surveying and field testing of construction materials.
* Knowledge and experience with principles of effective communication and supervision
* Able to work independently, make effective decisions concerning construction work in progress and solve field problems
* Able to direct the efforts of subordinate inspectors
Additional Preferred Qualifications
1) BS degree in Civil Engineering and/or EIT
2) Caltrans inspection experience
3) Proficient in the use of Microsoft Office programs
4) Knowledge of Caltrans standard plans, specifications, procedures, and Construction Manual
5) Ability to assist the Resident Engineer in all aspects of required field and office construction engineering work including, but not limited to the following:
* Experience in the inspection of traffic control system compliance
* Experience in Water Pollution Control Program (Storm Water Pollution Prevention Plan) enforcement
* Knowledge and experience with equipment used in construction inspection, surveying, field testing of construction materials, and construction office engineering
* Knowledge of computers, computer applications, and computer software programs such as Microsoft Office (Word, Excel, PowerPoint, and others)
* Knowledge and experience with principles of effective communication and supervision
* Ability to work night shifts for an extended duration
Move Forward with Kleinfelder
Kleinfelder has been connecting great people to the best work since 1961. We are engineers, scientists, and construction professionals providing solutions that improve our clients' transportation, water, energy, and other private infrastructure. As a responsive, cross-disciplinary team of bright, curious, and innovative problem-solvers, we are dedicated to doing the right thing, every day, on every project from over 110 offices in the US, Canada, and Australia. Connecting great people to the best work is our purpose - together, we deliver.
Progress with an Employer that Values You
Kleinfelder is an inclusive organization free from discrimination. We are a stronger organization when we are a diverse workforce and believe that through diversity, equity, and inclusion comes creativity, innovation, and unity. We are proud to offer the following:
Benefits: Kleinfelder offers an excellent compensation and benefits package, including: medical, dental, vision, life insurance, 401(k) plan, and paid holidays. The expected salary range for the position is displayed in accordance with the California Pay Transparency Law. Final agreed upon compensation is based upon individual qualifications and experience. The expected salary range for the position is displayed in accordance with the California Pay Transparency Law. Final agreed upon compensation is based upon individual qualifications and experience. Salary range: $34.73 - 57.96/hr.
Career Development: We are committed to investing in the professional development of our staff, offering each employee every opportunity to grow, develop, and take control of their career paths. We support these efforts through reimbursements for continuing education as well as many of the expenses associated with trainings and certifications, and opportunities for career development through our internal Mentoring Program.
Equal Opportunity: Kleinfelder is an Equal Opportunity Employer - Minorities/Women/Disabled/Veterans. (Compliant with the new VEVRAA and Section 503 rules)
NOTICE TO THIRD PARTY AGENCIES
Please note that Kleinfelder does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, Kleinfelder will not consider or agree to payment for any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, Kleinfelder explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resume, including those submitted to hiring managers, are deemed to be the property of Kleinfelder.
#LI-SF1
$34.7-58 hourly Auto-Apply 11d ago
Quality Control Inspector (2nd Shift)
Irhythm Technologies 4.8
Quality inspector job in Orange, CA
Career-defining. Life-changing.
At iRhythm, you'll have the opportunity to grow your skills and your career while impacting the lives of people around the world. iRhythm is shaping a future where everyone, everywhere can access the best possible cardiac health solutions. Every day, we collaborate, create, and constantly reimagine what's possible. We think big and move fast, driven by our commitment to put patients first and improve lives. We need builders like you. Curious and innovative problem solvers looking for the chance to meaningfully shape the future of cardiac health, our company, and your career
About This Role:
The 2nd Shift Quality Control (QC) Inspector is responsible for supporting manufacturing operations during second shift by performing inspection, documentation review, and batch release readiness activities for finished goods and sub-assemblies. This role focuses on reviewing batch records, travelers, and routers, ensuring Good Documentation Practices (GDP) compliance, identifying quality issues, and initiating nonconformances (NCs) when required.
The QC Inspector also provides Receiving Inspection (RI) support as needed to ensure material flow continuity and compliance with inspection requirements.
Why This Role Is Critical
Provides real-time quality oversight on second shift, ensuring batch records, travelers, and GDP compliance are verified at the time of execution rather than retrospectively.
Enables timely identification and containment of nonconformances, reducing quality escapes, rework, and compliance risk.
Supports on-time release readiness and uninterrupted manufacturing flow, preventing inspection and documentation backlogs into first shift.
Strengthens audit readiness and cross-shift continuity, ensuring clear handoff and sustained control of quality issues across shifts.
What You WIll Be Doing
Batch Record, Traveler & Router Review
Perform detailed review of batch records and travelers for finished goods and sub-assemblies to ensure completeness, accuracy, and compliance with approved procedures.
Verify that all required manufacturing steps, inspections, testing reports, in-process checks, and approvals are properly completed and documented.
Ensure material traceability, including material lots, subassemblies, equipment identification (when applicable), and inspection status.
Access and reference the electronic Quality Management System (eQMS) to ensure the current, approved revisions of drawings, specifications, procedures, and work instructions are used during inspection and batch record review activities.
Verify that batch records, travelers, and inspection activities are executed against the correct released document revisions, and escalate discrepancies when outdated or incorrect documents are identified
Identify documentation errors, omissions, or discrepancies and ensure timely correction in accordance with GDP requirements.
Finished Goods & Sub-Assembly Inspection
Perform in-process, final, or verification inspections of finished goods and sub-assemblies per approved inspection plans and work instructions.
Ensure inspection results are accurately recorded and aligned with acceptance criteria.
Support timely review and release readiness of manufacturing lots to maintain production flow.
Nonconformance Identification & Escalation
Identify, document, and initiate Nonconformance (NC) records when inspection results, documentation, or material conditions do not meet requirements.
Ensure nonconforming material is properly identified, labeled, and segregated to prevent unintended use.
Escalate quality issues to Quality Control leadership and Manufacturing supervision as required.
Good Documentation Practices (GDP) Compliance
Enforce GDP standards across all reviewed records, including batch records, travelers, routers, and inspection forms.
Ensure corrections, clarifications, and late entries (when applicable) are performed per approved GDP procedures.
Support identification of recurring documentation issues and participate in corrective actions or retraining as needed.
Receiving Inspection (RI) Support
Perform Receiving Inspection (RI) activities when required, following approved sampling plans, inspection criteria, and procedures.
Verify material identification, lot traceability, and acceptance status.
Accurately document RI results and communicate material status to Manufacturing and Quality teams.
Compliance & Audit Readiness
Perform all activities in compliance with ISO 13485, and internal QMS SOPs, DOP's and work instructions.
Maintain inspection areas and records in a state of audit readiness.
Support internal audits and regulatory inspections by providing accurate records and inspection evidence as requested.
Cross-Shift & Cross-Functional Communication
Communicate inspection results, documentation issues, and open quality concerns clearly during shift handoffs.
Collaborate with Manufacturing, Quality Engineering, Receiving, and first-shift QC personnel to ensure continuity of quality controls.
What We Want to See
High School Diploma or GED required; Associate's or Bachelor's Degree in a technical or life sciences field is preferred.
Minimum of 2-5 years of experience in a medical device manufacturing, pharma, aerospace or regulated manufacturing environment, preferably in Quality Control or Inspection.
Experience navigating an electronic Quality Management System (eQMS) to review and reference released drawings, specifications, SOPs, and work instructions
Working knowledge of Good Documentation Practices (GDP) and controlled document execution.
Experience reviewing batch records, travelers, routers, and inspection records.
Ability to identify quality issues and initiate nonconformance records in accordance with established procedures.
Strong attention to detail with a focus on accuracy, compliance, and data integrity.
Ability to work independently on second shift with minimal supervision.
Effective verbal and written communication skills.
Ability to manage multiple tasks and prioritize work to support production needs.
Ways to Stand Out
Experience performing Receiving Inspection (RI) or FAI activities.
Familiarity with sampling plans, inspection plans, and acceptance criteria.
Demonstrated experience reviewing engineering drawings, including GD&T, to identify critical-to-quality (CTQ) characteristics, specification notes, and applicable inspection requirements, and applying them during inspection and batch record review
Experience using enterprise resource planning (ERP) systems (e.g., QAD, SAP) to support manufacturing execution, batch review, material status, and traceability is a plus
Location:
Orange County
Actual compensation may vary depending on job-related factors including knowledge, skills, experience, and work location.
Estimated Pay Range
$21.15 - $26.44
As a part of our core values, we ensure an inclusive workforce. We welcome and celebrate people of all backgrounds, experiences, skills, and perspectives. iRhythm Technologies, Inc. is an Equal Opportunity Employer. We will consider for employment all qualified applicants with arrest and conviction records in accordance with all applicable laws.
iRhythm provides reasonable accommodations for qualified individuals with disabilities in job application procedures, including those who may have any difficulty using our online system. If you need such an accommodation, you may contact us at *********************
About iRhythm Technologies
iRhythm is a leading digital healthcare company that creates trusted solutions that detect, predict, and prevent disease. Combining wearable biosensors and cloud-based data analytics with powerful proprietary algorithms, iRhythm distills data from millions of heartbeats into clinically actionable information. Through a relentless focus on patient care, iRhythm's vision is to deliver better data, better insights, and better health for all.
Make iRhythm your path forward. Zio, the heart monitor that changed the game.
There have been instances where individuals not associated with iRhythm have impersonated iRhythm employees pretending to be involved in the iRhythm recruiting process, or created postings for positions that do not exist. Please note that all open positions will always be shown here on the iRhythm Careers page, and all communications regarding the application, interview and hiring process will come from a @irhythmtech.com email address. Please check any communications to be sure they come directly from @irhythmtech.com email address. If you believe you have been the victim of an imposter or want to confirm that the person you are communicating with is legitimate, please contact *********************. Written offers of employment will be extended in a formal offer letter from an @irhythmtech.com email address ONLY.
For more information, see *********************************************************************************** and *****************************************
$21.2-26.4 hourly Auto-Apply 14d ago
Quality Control Inspector
Canopy A&D
Quality inspector job in Ontario, CA
Job DescriptionFrom Engine Bay to Payload, we protect vital structures and systems. Hera Technologies is a premier contract manufacturer specializing in high-precision metallic and non-metallic solutions for the Aerospace, Defense, Space, and Commercial Airline sectors. Our commitment to quality, innovation, and customer satisfaction has positioned us as an industry leader in the design, manufacturing and maintenance of thermal support systems. Our team is driven by excellence, integrity, and a passion for advancing aerospace technology.
Take the next step in your career with a company committed to excellence, where your contributions are recognized, and your potential is realized.
Take the next step in your career with a company committed to excellence, where your contributions are recognized, and your potential is realized.
Role OverviewThis is a full-time, on-site role for a Quality Control Inspector located in Ontario, CA. The Quality Control Inspector will be responsible for conducting inspections, ensuring quality control and quality assurance, and managing quality-related processes. The inspector will perform regular quality checks, document findings, analyze quality data, and maintain records. The role also involves collaborating with other team members to identify and address any quality issues and implementing corrective actions to ensure products meet the company's standards.Key Responsibilities
Conduct in-process and final inspections of products to ensure conformance to standards.
Perform regular quality checks, document findings, and analyze quality data.
Maintain accurate and detailed records of inspections and test results.
Collaborate with production teams to identify and address quality issues.
Assist in implementing corrective actions to ensure products meet company standards.
Ensure all processes and products adhere to industry standards and regulations.
Required Qualifications
Proven experience in Quality Control, Quality Assurance, and Inspection.
Experience with Quality Management systems and processes.
Strong communication skills.
Excellent attention to detail and problem-solving abilities.
Ability to work independently and as part of a team.
Knowledge of industry standards and regulations.
Associate degree or equivalent relevant experience.
Preferred Qualifications
Bachelor's Degree is preferred.
Additional certifications in quality control or related fields are a plus.
Previous experience in a manufacturing or fabrication environment is beneficial.
Additional Requirements:
Willingness to work long hours and weekends when needed to meet critical deadlines
Willingness to travel to customers' locations or other Hera sites as needed
Ability to use a computer and most common software programs to complete assignments
Ability to communicate with individuals and groups in person, by phone and online
Job DetailsType: Full TimeBusiness Hours: 7:00 AM - 3:30 PM or 2:00 PM - 12:30 AMHourly Range: $25 to $33Base Location: Ontario, CATravel: Up to 10%
Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. The base salary is just one part of your total compensation package at Hera. You will also have access to a comprehensive set of benefits like:
Company paid employee medical, dental and vision insurance Retirement plan participation (eligibility required) Paid Sick LeavePaid VacationPaid holidays Discretionary bonuses Physical Requirements / Work Environments· Ability to work in office, lab, and manufacturing environments with occasional exposure to noise, dust, and temperature variations· Must be able to lift and carry up to 35 lbs and perform tasks involving standing, walking, bending, and manual assembly· Visual acuity required for reading technical drawings and digital media· Valid US driver's license and ability to operate motor vehicles The above statements are intended to describe the general nature and level of work performed. They are not intended to be an exhaustive list of all responsibilities, duties, or skills required. Management may modify or assign additional duties as needed. EXPORT CONTROL REQUIREMENTS:To conform to US Government export regulations, the applicant must be a (i) US Citizen, (ii) lawful permanent resident of the U.S. (aka green card holder), (iii) protected individual as defined by U.S.C. 1324b(a)(3), or (iv) eligible to obtain the required authorizations from the U.S. Department of State. Hera Technologies is an Equal Opportunity Employer, employment with Hera Technologies is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
Elevate Your Career as a Quality Control Receiving Inspector in Huntington Beach, CA! - Urgently hiring 1st Shift QC Receiving Inspector in Huntington Beach! Job Title: Quality Control Receiving Inspector Pay: $26 - $27 per hour Hours: 6:30 AM - 3:00 PM
Start Date: ASAP
Looking for a hands-on role in a growing company? Join Helpmates, a leader in quality assurance within the aviation industry, as a Quality Control Receiving Inspector in Huntington Beach, CA and make an impact every day. As a Quality Control Receiving Inspector, you'll play a key role in ensuring the highest standards of quality for aviation parts, directly contributing to the safety and reliability of the industry. You'll work closely with engineering teams to deliver results that make a difference.
What You'll Do:
As a Quality Control Receiving Inspector, you will be responsible for:
Interpreting engineering drawings and specifications to ensure accurate inspections.
Utilizing precision measuring tools like calipers, micrometers, height gauges, and indicators for thorough assessments.
Conducting visual and dimensional inspections for incoming aviation parts.
Performing receiving and first article inspections to guarantee compliance with industry standards.
Preparing detailed inspection reports and nonconformance documentation.
Identifying root causes of any discrepancies and contributing to corrective actions.
Reviewing supplier certifications for compliance with specified requirements.
Collecting and analyzing data for statistical assessments related to quality metrics.
Understanding and interpreting tolerances, as well as geometric and positional requirements.
Traveling as needed to support supplier audits or inspection programs.
What You'll Bring:
The ideal candidate for this role will have:
Education: High School Diploma or GED equivalent is required; an Associate's Degree is desired.
Experience: Open to both entry-level candidates and those with prior experience in quality control.
Skills: Experience with raw materials, electrical, machined components, crush core panels, and/or injection molded parts is preferred.
Why Join Us in Huntington Beach?
Supportive Team Culture: Work alongside a talented team dedicated to quality and excellence.
Career Growth Opportunities: Expand your skills and advance in a thriving company.
Competitive Pay and Great Benefits: Enjoy industry-leading compensation and comprehensive health benefits.
Affordable Health and Prescription Coverage: Receive health benefits with no waiting period once hired permanently.
Retirement Plan: Access to a 401k or Pension plan.
Location & Schedule:
This position is on-site in Huntington Beach, CA and offers 1st shift hours from 6:30 AM to 3:00 PM.
Ready to Take the Next Step?
If you're ready to start a rewarding career as a Quality Control Receiving Inspector in Huntington Beach, apply today or contact our recruiting team to learn more. Don't wait, we're hiring now!
$26-27 hourly 3d ago
Quality Control Inspector - Second Shift
Kinetic Personnel Group, Inc.
Quality inspector job in Covina, CA
Industry: Precision Manufacturing / Machining
Shift: 2nd Shift (3:00 PM to 1:30 AM, 4/10 schedule)
Pay: $24-$28/hour (DOE)
Schedule Notes:
Candidate will train on 1st shift (6:00 AM - 4:30 PM) during the first week. Upon successful training, they will move to 2nd shift (3:00 PM - 1:30 AM).
Position Overview:
Seeking an experienced Quality Control Inspector to perform dimensional inspections and first article inspections within a precision machining environment.
Qualifications:
• Proficient with micrometers, calipers, gauges, optical comparators, height gauges, drop indicators, etc.
• Experience with standard QC measuring equipment
• Able to perform First Article inspections with minimal supervision
• Strong math and measurement skills
• Familiarity with blueprint reading & work instructions
• Comfortable in a fast-paced manufacturing environment
• Proficient using Windows-based software
• Strong communication skills; detail-oriented and organized
Responsibilities:
• Perform dimensional inspections (in-process, first article, final)
• Read and interpret blueprints and specifications
• Monitor production operations for conformance to specifications
• Reject or tag non-conforming parts/materials
• Communicate inspection findings and recommended adjustments
• Perform additional related tasks as needed
KPG123
$24-28 hourly 13d ago
Quality Control Inspectors (Irvine, CA)
Insight Global
Quality inspector job in Irvine, CA
The Quality Inspector is responsible for performing incoming and in‑process inspections to ensure all purchased and manufactured components meet required specifications. This includes using precision measurement tools, interpreting technical drawings, maintaining accurate inspection records, and supporting both QA and manufacturing teams in a regulated environment. The role also requires proper handling, identification, and documentation of materials. This position is onsite in Irvine or Tustin, CA, 5 days per week (possible Saturday work) with 1-3 hours of required overtime per day.
Day‑to‑Day Responsibilities
Perform incoming and in‑process inspections on manufactured and purchased components per drawings and control plans.
Use properly calibrated gages and precision measurement tools (micrometers, verniers, dial calipers, hardness testers, surface testers, preset gauges).
Prepare and maintain component history records and incoming part documentation.
Ensure all materials are properly identified, documented, and segregated.
Process and segregate non‑conforming materials per procedure.
Support QA with technical assistance on measurement systems.
Provide assistance to manufacturing teams as needed.
Work with and understand ESD (electrostatic discharge) devices.
Maintain a safe and compliant work environment.
Perform other duties as assigned.
We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: ****************************************************
Skills and Requirements
High school diploma.
Minimum 2 years of QA/QC experience with on‑the‑job training.
Extensive hands-on experience using precision measuring tools for high‑tolerance components.
Strong proficiency in blueprint reading and interpreting tight tolerances.
Familiarity with GD&T (Geometric Dimensioning & Tolerancing).
Ability to perform basic math (whole numbers, fractions, decimals).
Familiarity with machine shop environments and processes.
Ability to ensure product quality in a highly regulated environment and maintain Device Master History record integrity.
PC skills including Word, Excel, Access, and exposure to ERP/manufacturing data systems. Technical training or relevant certifications.
Experience operating a CMM; ability to program CMM equipment (training may be provided).
Broader understanding of manufacturing data systems or advanced inspection tools.
$34k-46k yearly est. 2d ago
QC Inspector
Solopoint Solutions, Inc.
Quality inspector job in Irvine, CA
Responsibilities:
Perform visual and dimensional checks various incoming products (sheet metal, PCBAs or CCAs, Printed Boards or PCBs, Conformal Coating, Labels or markings, Cables, Harnesses; COTS items, and etc.) at various stages (Incoming, RMA, In-process, Final, Shipping, etc.)
Test and or verify products for a variety of characteristics such as functional performance mechanically or electrically, or chemical properties or composition.
Perform First Article Inspection and prepare FAIRs as needed.
Record Inspection findings and generate NCMR's, DCRs' and ERRs' as needed.
Communicate with the Project Mangers or QA for any possible delays and/or resolutions of any urgent and high priority jobs.
Required:
Extensive working knowledge of IPC-A-600, J-STD-001 and IPC-A-610, and IPC-A-620. Prior or current IPC training and/or certification is preferred.
Ability to read, comprehend and interpret engineering drawings and documentation such as electrical schematic diagrams, mechanical and assembly drawings, BOM, and assembly instructions, and etc.
Ability to adjust in fast-paced dynamic operations.
Ability to apply concepts of basic algebra and geometry such as decimals, fractions, length, proportions, percentages, area, circumference, and volume.
Ability to confer with management or engineering staff to determine quality and reliability standards or applicable requirements.
Ability to use mechanical measurement tools such as calipers, micrometers, and electrical measurement tools, etc.
Ability to operate computers and able to use computer applications and files such Microsoft Word and Excel, Adobe PDF, Outlook emails, and other databased platforms.
Detail oriented, dedicated and self-motivated.
Ability to work under minimum supervision.
Work well in a team environment.
Must have good interpersonal skills.
$34k-46k yearly est. 15d ago
Quality Control Inspector (plastics injection molding)
Balda C Brewer
Quality inspector job in Ontario, CA
Job Description
This position is responsible for performing in-process, component and finished goods visual and dimensional inspections using SPC/AQL sampling plans to support production, incoming receiving inspection and Quality investigations as needed. These inspections utilize industry standard metrology and gaging methods to identify defects and ensure product meets customer requirements. This position works on the production floor sampling, performing visual inspections and assessing quality of the parts and process. Attention to detail and the ability to work with minimal amount of supervision and understanding of quality inspection tools and equipment is required.
Essential Job Functions and Responsibilities:
Perform dimensional and visual In-process and finished good inspection on parts/boxes per approved control plans, test methods and customer drawings.
Quality / SPC evaluation when required per site documentation.
Communicate with Machine Technicians, Operators and Production Supervisors inspections/SPC results to operation when defects are detected to ensure process adjustments are made and in an effort to run a consistent quality product.
Review daily NCR reports, SPC charts and quality system documentation.
Enforce and maintain our Quality System and provide suggestions to maintain our continuous improvement system.
Visually and dimensionally evaluate product and packaging in accordance with established acceptance criteria and standards.
Follow all Safety rules and guidelines. Report any unsafe condition or practice.
Maintain a clean work area throughout the shift.
Evaluate product documentation for adequacy and completeness.
Visually and dimensionally evaluate product and packaging in accordance with established acceptance criteria and standards.
Measure process performance against established acceptance criteria and standards.
Record real time data and prepare formal reports.
Other assignments as may be given by the Quality Engineer or Managers.
Support maintenance and calibration requirements for Quality Lab and production floor
Place non-conforming product on hold and create non-conforming records and assist with Quality inspections of rework product as needed.
Partner with Quality Control department for the management of product retains.
Update Quality Inspection requirements
Assist in the creation, closure review and verification of completion of batch records and release products and issuance of certificates of compliance to ensure product produced meet the customer and regulatory requirements
Assist with New Product validation as required.
Participate in Gage Repeatability and Reproducibility (GR&R), Geometric Dimensioning and Tolerancing (GD&T or GD and T) Intermedium studies and product/process validations
Review and release product for shipping though issuance of COC ensuring all Customer requested documents are provided at the time of shipment
Maintain cleanliness of QC lab, implement and sustain 6S, Quality boards and speak to status of site Quality metrics
Able to generate and reconcile Labels (as needed)
Perform Environmental monitoring activities according to site procedures. Train Quality personal on environmental monitoring activities and clean room requirements.
Other assignments as may be given by the Quality Supervisor or Plant leadership team.
Core Competencies:
Statistical Process Control Knowledge
Cosmetic, visual and dimensional Inspection
Housekeeping
General Safety
Communication & Teamwork Skills
Computer literate. Good verbal and written communication skills.
Ability to perform standard measurement and test equipment.
Attendance-dependability
Time Management
IQMS Knowledge
Inspection Skills
Organizational Skills
Basic math skills
Metrology
Blueprint Reading
Data Entry Skills
Knowledge, Skills, and Abilities
Read and write in the English language.
Must be able to perform basic math such as addition, subtraction, multiplication, division, fractions, and decimals.
Ability to read and interpret basic engineering drawings and product specifications.
Proficiency with utilizing ANSI Sampling Plans
Proficient in utilizing hand measurement tools (Caliper, Micrometer, Ruler, Gage Blocks, etc.)
Experience with PCDMIS and Measuremind 3D automated inspection software usage (CMM, OGP, Smart scope, etc.) and programming a plus
Knowledge of Medical device standards and Regulations (ISO 13485)
Ability to read and decipher blueprints
Knowledge of GD&T
Experience with handling non-conforming material
Experience with device history record creation and review
Knowledge of ERP and quality system elements
Proficiency in using Microsoft Excel, Access Database and Word
Experience in supporting process validation activities including testing and Gage R&R
Knowledge of sample plans creation is a plus
Understanding of risk management is a plus
Education and/or Experience:
High School Diploma or GED.
Minimum 6 months factory related experience in a regulated industry.
Minimum of one year experience in visual and dimensional evaluation of molded products; or minimum three years experience in plastic injection molding and assembly processes
Experience with calipers and micrometers is required; Other inspection equipment such as indicators, height gage, & pin gauges are a plus.
Should have prior experience in a manufacturing environment to understand normal safety requirements.
Certified Quality Inspector or Technician a plus
$34k-46k yearly est. 19d ago
2ND SHIFT QC INSPECTOR
Teamquest Staffing Services
Quality inspector job in Anaheim, CA
QC INSPECTOR for 2nd shift, pay DOE, 4 month minimum experience, GMP knowledge, able to write quality reports, bilingual, pay 20-21 per hr or depending on exp can be more.
$34k-46k yearly est. 16d ago
QC Final Inspector | 2nd Shift
Advancedpcb
Quality inspector job in Orange, CA
Job DescriptionDescription:
Shift: 2:30pm - 11:00pm
Scope:
Inspect and evaluate final products to ensure compliance to customer requirements prior to delivery.
Essential Job Function:
Perform Final Inspection on finished product to ensure compliance to customer requirements.
Read customer drawings
Perform measurements with measurement tools such as calipers, micrometers, and pin gages.
Perform rework as appropriate, which may include mask touch-up, material removal with an x-acto knife, burnishing, soldering irons, final finish brush plating, sanding
Verify acceptability of rework after completion
Identify and mark non-conforming product to ensure it is not delivered
Prepare standard and AS9102 First Article Reports as needed
Verify certifications and reports are complete and accurate and can be used for final acceptance and certification of product
Complete Deliverables for Customers and ensure they are complete and accurate
Complete department logs and record yield data as required
Perform preventative maintenance as defined by department maintenance schedule
Support other work areas or departments as required by production or management.
Ability to work overtime as requested
Keep work area clean and organized
Requirements:
Essential Qualifications, Education and Experience:
High school diploma or equivalent
One year of PCB manufacturing experience
Knowledge of IPC-6012, or IPC-6013
Knowledge of IPC-600
Strong work ethic
Ability to work effectively in a team environment
Physical Requirements:
Prolonged periods sitting and performing visual and manual tasks.
Fine motor skills
Ability to use microscopes for long periods of time performing job duties
ITAR Compliance Requirement:
This position requires access to controlled technical data and/or participation in activities subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons, as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals with refugee/asylee status). Candidates who do not meet ITAR eligibility requirements will not be considered for this position.
AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC).
Compensation: Exact compensation may vary based on skills, experience, and location.
About AdvancedPCB
AdvancedPCB is a leading manufacturer of high-reliability printed circuit boards. The company features 6 total manufacturing sites: Santa Clara, our headquarters in the heart of the Silicon Valley; 2 in Southern California, 1 in Maple Grove, Minnesota, Aurora, Colorado and Chandler Arizona. Currently, the company is viewed as over $100 Million; 180,000 sq. ft. of manufacturing space with over 480 employees, making AdvancedPCB one of the largest privately held printed circuit board manufacturers in North America.
Visit us!
**********************************
$34k-46k yearly est. 25d ago
Quality Control Inspector
Concorde Battery Corp 4.1
Quality inspector job in West Covina, CA
Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply.
Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor.
Position Responsibilities:
Perform inspection of materials, processes and final product, per business need.
Generates inspection reports according to AS9100 requirements.
Enter inspection data into systems.
Utilizes inspection tools including calipers, gauges and testing equipment (CMM).
Reads and interprets drawings, procedures and work instructions.
Identifies areas for improvement in inspection processes and coordinates implementation.
Comply with all safety requirements; participate in safety training/practices.
Qualifications:
1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment.
Understanding of QA requirements, processes, practices and systems.
Demonstrated ability to work in team-based environments.
Ability to read engineering drawings to determine and measure features and tolerances.
Strong written and verbal communication skills in English.
Software experience; Excel, Word, Power Point, etc.
Bilingual - English/Spanish
Perks and Benefits:
Desired first shift schedule
Premium Health Insurance - $0 employee premium & $0 deductible
Company provided life insurance for all employees with $0 employee contribution
Dental
10 paid holidays
5 paid sick days
Accrued vacation
401(k)
Profit Sharing
Frequent overtime availability based on customer demand
This position description reflects the general level and nature of the job, and is not to be considered as all inclusive.
Concorde Battery Corporation offers a competitive salary and outstanding benefits.
For more information about Concorde Battery Corporation please visit our website at ***********************
CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.
$35k-43k yearly est. 60d+ ago
Quality Control Inspector
Motive Workforce Solutions
Quality inspector job in Tustin, CA
The Quality Control Inspector is responsible for verifying that Solar PV, BESS, and EV projects are installed in compliance with design drawings, codes, standards, and client requirements. This role ensures quality assurance through inspection, documentation, and enforcement of corrective actions.
$34k-46k yearly est. 2d ago
QC Line Inspector | Food Manufacturing
Elias & Company Management
Quality inspector job in Rancho Cucamonga, CA
Temp
Schedule: Monday-Friday, 8:00 AM - 4:30 PM + OT & Weekends as needed Pay: $18-$19/hour (DOE)
We are currently seeking a detail-oriented and proactive QC Line Inspectors to join our team and help ensure product excellence on the production line. This role plays a critical role in monitoring and verifying product quality during production. This position ensures that all products meet company specifications, customer expectations, and regulatory requirements. You'll work closely with Production and Quality teams to identify and resolve issues in real time.
Key Responsibilities:
· In-Process Quality Monitoring
Inspect products during production to ensure quality standards.
Monitor packaging, labeling, and coding accuracy.
Verify lot numbers, expiration dates, and weights.
· Documentation & Reporting
Complete in-process quality check records.
Document non-conformances and deviations.
Communicate issues to Production and QA Supervisors.
· Compliance & Standards
Follow GMP, safety, and OSHA/Cal-OSHA guidelines.
Ensure compliance with SOPs and customer specs.
Support audit and inspection readiness.
· Collaboration & Continuous Improvement
Assist in implementing corrective actions.
Participate in quality improvement initiatives.
Help train employees on quality procedures.
Qualifications:
· Required:
Must be bilingual and able to pass E-Verify.
High school diploma or GED.
1+ year of QA or manufacturing experience.
Strong attention to detail and ability to work in a fast-paced environment.
Ability to read SOPs, batch records, and specs.
Basic computer skills.
· Preferred:
Experience in GMP, ISO, and FDA-regulated environments.
Familiarity with inspection tools (scales, calipers, gauges).
Knowledge of ERP or quality management systems.
Physical & Environmental Requirements:
Ability to stand for long periods.
Occasional lifting up to 25 lbs.
Exposure to manufacturing environments.
$18-19 hourly 60d+ ago
Quality Control Inspector
Chemical Guys
Quality inspector job in Fontana, CA
Chemical Guys is more than a brand, it's a lifestyle with a worldwide following. Driven by adventure, a passion for shine, and a love for the road ahead, we welcome any and all who share this passion to become part of our family.
When we started, we decided to wipe the slate clean and start off fresh with the simple idea to make the best quality chemicals manufactured right here in California to the highest quality standard. Over the years, we have grown into so much more: a huge library of detailing knowledge, a benchmark in the industry, group of friends with one common passion.
Today, Chemical Guys has become a true omnichannel leader in automotive appearance industry with a massive social media following and product distribution around the World. But we know this is still just the beginning as we want to win in the long run, drive innovation, and refine the industry while having fun and smiling along with you. So, grab a wash mitt, some soap, put a smile on your face, and don't look back… it's going to be an unforgettable ride!
Summary of Position
The Quality Inspector is responsible for ensuring all products meet & exceed quality expectations from receiving of inbounds to finished good output in production. As a Quality Inspector, you will oversee all Quality Control processes performed in-house and work closely with the Quality Control Lead when performing investigations for root cause analysis & CAPA implementation in the spirit of continuous improvement.
Job Responsibilities
Perform in-house investigations to ensure adherence to internal standards across the following categories: Raw chemicals, finished goods, components, machines, accessories, etc.
Maintain in-house internal finished good standards & label standards.
Work alongside the Quality Lead in maintaining a non-conformance log & providing quality metrics to support KPIs.
Execute & document unique projects from the testing of new components to the execution of planned E&O exercises.
Monitor on-hand waste to schedule & support routine pickups.
Perform product assessments, including but not limited to -
-Physical: Color, Odor, Appearance, etc.-Analytical: Torque, Specific gravity, pH, Viscosity, etc.
Be cross trained in operating QC lab equipment for performing in house testing, including but not limited to: pH testing, viscosity testing, specific gravity.
Analyze product characteristics against established specifications/standards to determine disposition (i.e. pass/fail). Includes evaluation of several Certificates of Analysis (COAs)
Adhere to basic principles of GLP & cGMP to expand these practices department wide.
Perform timely escalations with strong communication skills using appropriate terminology.
Under the guidance of the Quality Manager, facilitate & assist in unique audit requests & testing when required.
Assist production, warehouse, and quality personnel as required.
Location: 13481 Valley Blvd. Fontana, CA 92335
Compensation: $19/hr
Job Type: Full Time with either temp to hire(benefits provided when you become perm. employee) or permanent hire from the start
30/60/90 Deliverables
30 Day
Fully comprehend the concept of inbound inspections and be capable of verbally speaking to all processes the position is responsible for with clear explanations of how to perform & the value it brings to the organization.
Build relationships with key team members & cross functional teams and provide a brief explanation of how their roles intertwine with the responsibilities of the QC Inspector.
Manage an inbound receipt and approval/rejection tracker for all items inspected and provide weekly summaries of rejected materials.
60 Day
Assist in Retains & Standards management and be capable of fully owning the process to support unique investigations.
Support the Quality Lead in conducting investigations & take ownership of projects related to Non-Conformances (NCRs) in pursuit of timely escalations and closures.
90 Day
Begin conducting trend analysis for rejected materials at inbound and provide a high-level summary including, but not limited to: items impacted, shared issue(s), quantities impacted, vendor information, etc
Requirements
Job Requirements
Strong written & verbal communication skills in English. Proficiency in Spanish is a plus.
High prioritization of safety and caution when utilizing sensitive laboratory equipment.
Knowledge of basic mathematics to be able to understand & analytical data.
Physically be able to climb ladders, stay on feet for a full 10hr shift and lift 50 lbs.
Physically be able to obtain samples from containers up to 72” tall.
Ability to prioritize & pivot daily activities driven by production urgency.
Relentless attention to detail.
American Society for Quality (ASQ) Certified Quality Inspector (CQI) preferred.
Salary Description $19/hr
$19 hourly 25d ago
Now Hiring! QC Line Inspectors | 1st & 2nd Shift| 832954
Helpmates 3.7
Quality inspector job in Huntington Beach, CA
Join Our Team as a 1st Shift QC Line and Final Inspector in Huntington Beach! - Urgently Hiring Job Title: 1st Shift QC Line and Final Inspector Pay: $25 - $27/hr DOE Hours: 6:30 am - 3:00 pm (overtime required) Looking for a hands-on role in the aviation industry? Join Helpmates, a leader in quality control for aviation parts, as a 1st Shift QC Line and Final Inspector in Huntington Beach, CA, and make an impact every day. As a Quality Control Inspector, you'll play a key role in ensuring the highest standards are met, supporting daily operations effectively.
What You'll Do:
As a Quality Control Line Inspector, you will be responsible for:
Interpreting engineering drawings and specifications to ensure compliance with industry standards.
Using standard measuring tools such as calipers, micrometers, height gauges, and dial indicators for precise measurements.
Conducting visual and dimensional inspections across receiving, in-process, final, and first article checks on aviation parts, from small components to full assemblies.
Preparing detailed inspection and nonconformance reports, analyzing root causes, and assisting with corrective action investigations.
Reviewing supplier certifications for compliance to maintain the integrity of production standards.
Collecting data for statistical analysis and supporting supplier audits, including necessary travel.
What You'll Bring:
The ideal candidate for this role will have:
A minimum of 1 year of hands-on experience in Quality Control and Final Inspection.
Proficiency with measuring tools including calipers, micrometers, height gauges, and indicators.
Experience in visual and dimensional inspections, with knowledge of aerospace standards preferred.
Familiarity with CMM/FARO equipment is a plus.
Strong analytical skills, attention to detail, and the ability to write clear nonconformance reports.
Why Join Us in Huntington Beach?
Enjoy flexible hours with the possibility of overtime to maximize your earning potential.
Benefit from a supportive team culture that values your contributions and fosters professional growth.
Access affordable health and prescription coverage with no waiting period after hire.
Participate in a 401k retirement plan to support your future financial goals.
Location & Schedule:
This position is on-site in Huntington Beach, CA, with shifts from 6:30 am to 3:00 pm. Overtime may be required.
Ready to Take the Next Step?
If you're ready to start a rewarding career as a 1st Shift QC Line and Final Inspector in Huntington Beach, apply today or contact our recruiting team to learn more. Don't wait; we're hiring now!
$25-27 hourly 2d ago
Quality Control Inspector
Concorde Battery Corp-Georgia 4.1
Quality inspector job in West Covina, CA
Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply.
Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor.
Position Responsibilities:
* Perform inspection of materials, processes and final product, per business need.
* Generates inspection reports according to AS9100 requirements.
* Enter inspection data into systems.
* Utilizes inspection tools including calipers, gauges and testing equipment (CMM).
* Reads and interprets drawings, procedures and work instructions.
* Identifies areas for improvement in inspection processes and coordinates implementation.
* Comply with all safety requirements; participate in safety training/practices.
Qualifications:
* 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment.
* Understanding of QA requirements, processes, practices and systems.
* Demonstrated ability to work in team-based environments.
* Ability to read engineering drawings to determine and measure features and tolerances.
* Strong written and verbal communication skills in English.
* Software experience; Excel, Word, Power Point, etc.
* Bilingual - English/Spanish
Perks and Benefits:
* Desired first shift schedule
* Premium Health Insurance - $0 employee premium & $0 deductible
* Company provided life insurance for all employees with $0 employee contribution
* Dental
* 10 paid holidays
* 5 paid sick days
* Accrued vacation
* 401(k)
* Profit Sharing
* Frequent overtime availability based on customer demand
This position description reflects the general level and nature of the job, and is not to be considered as all inclusive.
Concorde Battery Corporation offers a competitive salary and outstanding benefits.
For more information about Concorde Battery Corporation please visit our website at ***********************
CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.
How much does a quality inspector earn in Menifee, CA?
The average quality inspector in Menifee, CA earns between $29,000 and $52,000 annually. This compares to the national average quality inspector range of $25,000 to $42,000.
Average quality inspector salary in Menifee, CA
$39,000
What are the biggest employers of Quality Inspectors in Menifee, CA?
The biggest employers of Quality Inspectors in Menifee, CA are: