Quality inspector jobs in Miami, FL - 174 jobs

Description: Job Purpose The QC Labeling Inspector is responsible for maintaining a high level of inventory accuracy and integrity within the Tissue Bank. Performs final product labeling and inspections, manages transport and storage of quarantine tissue, and maintains labeling supplies. Promotes Lean Behaviors across the organization (This includes Participating in Try storming, Brainstorming and Lean Related Initiatives). Promotes Usage of Problem Solving. Ensure that Labeling Operations are in Compliance with the State and Federal Regulations and AATB Standards. Duties and Responsibilities Preparation of the QC Labeling areas as specifically described in SOPs. Performs final inspection of products for proper specifications, label accuracy, and compliance with applicable regulations, standards and Vivex Biologics, Inc. quality requirements. Combines components for final products. Applies labels to final product and adds package inserts, boxes, etc. Maintains accurate inventory of post-processing, quarantine products (frozen and room temperature). Performs disposition of nonconforming products as directed. Coordinates and stages products for sterilization. Monitors freezers and responds to alarms. Supports nonconformance investigations, when applicable. Maintains knowledge of applicable regulations and standards related to storage, handling, labeling and inspections of tissue. Maintains effective communication with management when issues arise to obtain appropriate instructions to address the issues. Performs other duties as assigned by management. Requirements: Qualifications High School/Minimum of 4 Years of Relevant Experience. Associate/Minimum of 1 Years of Relevant experience. Bachelors/Minimum of 0-1 Years of Relevant experience Working Conditions Work is indoors in environmentally controlled conditions. Overtime may be required to meet production deadlines. Some on-call and weekends may be required. Physical Requirements Able to stand for extended period. Able to lift 25 lbs. without assistance. Must be able to infrequently lift, push, pull and carry boxes weighing up to 25 pounds. Walk, squat and bend over for intervals of 15-30 minutes, with or without reasonable accommodation. Direct Reports No direct reports. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job any time. Vivex Biologics, Inc. is an equal opportunity employer (EEO) and expressly prohibits any form of workplace discrimination and/or harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfers, leaves of absence, compensation and training. Vivex Biologics, Inc. with the Americans with Disability Act (ADA) which prohibits discrimination against qualified individuals with disabilities who, with or without reasonable accommodation, can perform the essential functions of a job.

LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI's propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Lead Detail Inspector(s) are responsible for the direct oversight of the Detail Inspection team, performing preliminary, hidden-damage, in-process, final Inspections, and perform return to service functions on all civil aviation articles received by this repair station in accordance with the current technical data provided in the manufacturer's instructions for continued airworthiness, operator technical data, service bulletins, service letters, airworthiness directives, government and industry standard practices, and other data acceptable and/or approved by the FAA. Responsibilities: * Oversee and coordinate inspections of the maintenance, preventive maintenance, or alteration of a powerplant, aircraft or appliance, or a part thereof, received at this repair station. * Oversee and coordinate inspections and required inspections in accordance with the methods, standards, and limits required by the accepted or approved data to determine that the work was satisfactorily completed. * Audit all inspection paperwork for completeness, task compliance, and deliver finalized documents to Records Dept. * Assist and train new and current inspectors in performing inspection tasks as specified on Company job cards, repair, and routing travelers, recording discrepancies as required. * Oversee the work performed by Inspectors who are unfamiliar with the methods, techniques, practices, and equipment used to perform maintenance, preventive maintenance, or alterations. * Lead Root Cause Analysis for nonconformances and audit corrective actions, including installed parts/material tags, tools and equipment used, proper signoff and references. * Ensure work performed by outside sources and incorporated in articles undergoing maintenance, preventive maintenance, or alteration was properly performed and documented. * Oversee and coordinate receiving inspection on incoming parts, materials, and tooling to ensure Company standards and requirements are met and generate the applicable identification tags. * In the absence of the Director of Inspection lead the Detail Inspection activities. * Communicate efficiently with all employee levels. Qualifications: * Airframe and Powerplant license * High School or equivalent and basic computer skills * Must possess exceptional attention to detail and proficiency in the inspection methods, techniques, aids, tools, and equipment used in aircraft jet engine maintenance. * 3 - 5 years experience as an inspector for aircraft jet engine maintenance. * Familiar with all regulatory requirements that govern the maintenance of aircraft jet engine. * Must be able to communicate Inspection Priorities to inspection personnel in a clear and concise manner. * Be able to read, write, speak, and understand the English language. * Must be legally authorized to work in the U.S Preferred Qualifications: * Experience as a Lead Inspector preferred. * Experienced with borescope inspection and interpretation of technical data during the borescope process preferred. Job Demands: Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws.

Mittera is looking for a Quality Inspector to join our growing team! The Quality Inspector will be responsible for developing, implementing, and maintaining comprehensive quality management systems that ensure our products consistently meet and exceed the highest industry standards. This role is critical in maintaining our reputation for excellence in our printing and collectible card production. Key Responsibilities * Perform inspections (in process, incoming and final) per procedures. * Release all acceptable finished goods, quarantine problematic finished goods for QA analysis. * Collect, review, and distribute Customer Samples based on Customer requirements * Collect, review, and file Retains. * Conducts WIP quality checks in each production department * Quarantine tag production that is outside of normal Mittera quality standards. * Sorts nonconforming product when required. * Notify Management immediately when any quality issue jeopardizes the completion of the order specified quantity. * Ensures tests and procedures are properly followed during production * Provides other assistance to the Quality Assurance Manager as requested * Works proactively to promote teamwork at all levels of the company * Conforms with and abides by all regulations, policies, work procedures, safety rules, security procedures and instructions * Performs all duties according to established safety policy, including wearing any required PPEs to perform duties as applicable * Willing to work flexible hours as needed * Ensure security of confidential Customer records and data * Special projects as assigned, working independently and/or within a team * And other job duties as assigned. Requirements Required Skills & Qualifications * Ability to understand, speak, read and write English * Self-starter and/or team player with strong verbal, written, and communication skills. * Courteous professional manner when interacting with all employees. * Solid technology skills with ability to utilize and learn various types of technology. * Strong interpersonal skills to handle sensitive and confidential situations while demonstrating poise, tact, and diplomacy * Efficient and high standards of accuracy and organization in performing tasks * Strong decision making skills and ability to prioritize work; effective time management skills * Analytical and problem-solving skills to find solutions to various problems; good vision, and mathematical competency * Proficient in Microsoft Office, including Word, Excel, internet and email * Ability to interact with all levels of the organization while maintaining integrity and strict confidentiality regarding sensitive information * Solid knowledge of workplace safety regulations and procedures to ensure compliance with health and safety standards. * Experienced with production tracking systems and software to monitor performance, optimize processes, and ensure efficient operations. * High School Diploma or equivalent * 2 years' experience in manufacturing setting Mittera is a leading-edge company that provides commercial and digital printing, finishing, graphic design, data analytics, direct mail processing, and fulfillment services. Mittera's full-service approach connects data-driven revelations, bar-raising creative, and expertly printed materials to give our customers' brand recognition it deserves. Competitive compensation and robust benefits plans are offered. Benefits include: * Medical * Dental * Vision * Life and AD&D Policies * Short and Long-Term Disability * 401K with Company Match * Paid Time Off * Paid Volunteer Time Off * Location specific benefits should go here! Mittera is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. All applicants must be 18 years of age or older. Visit us today at mittera.com or stop by and fill out an application at Mittera location near you!

Job DescriptionQuality Control Furniture Inspector Company: Funxion White Glove Service Job Type: Full-Time About Funxion Funxion White Glove Service specializes in high-end receiving, storage, inspection, deluxing, and white-glove delivery of furniture and fixtures for residential and corporate clients. Our reputation is built on precision, accountability, and presentation. We are seeking a detail-oriented Quality Control Furniture Inspector to join our receiving and operations team. Position Overview The Quality Control Furniture Inspector is responsible for inspecting furniture upon receipt and prior to delivery to ensure accuracy, condition, and presentation meet Funxion's white-glove standards. This role also performs basic deluxing services when items arrive dusty or lightly soiled. The ideal candidate takes pride in quality, has a strong eye for detail, and understands the importance of protecting high-value client assets. Key Responsibilities Inspection & Documentation Verify quantities, product specifications, and condition against packing slips and receiving documents Identify damage, defects, or discrepancies upon receipt Accurately document issues with detailed notes and photos Properly label, tag, and prepare items for storage or delivery Communicate inspection findings clearly with receiving, operations, and office teams Quality Control & Deluxing Responsibilities Inspect furniture and fixtures for damage, defects, and overall cleanliness Perform basic deluxing services as required, including dust removal, surface cleaning, and light wipe-downs Use approved cleaning materials and methods appropriate to furniture type, material, and finish Identify items requiring advanced cleaning, repair, or refinishing and escalate per company procedures Ensure all inspected and deluxed items meet Funxion's white-glove quality standards prior to storage or delivery Operational Support Repack items securely after inspection or deluxing Maintain a clean, safe, and organized inspection area Follow company safety, handling, and quality procedures Support receiving and warehouse operations as needed Qualifications Previous experience inspecting furniture, fixtures, case goods, or upholstery preferred Strong attention to detail and ability to identify damage, defects, and cleanliness issues Comfortable performing light cleaning/deluxing as part of quality control Ability to document findings clearly using mobile devices or tablets Ability to lift, move, and handle furniture safely with a team Reliable, punctual, and team-oriented Experience in warehousing, receiving, or logistics environments is a plus English proficiency required (reading and writing inspection notes) Benefits Competitive pay Paid time off and company holidays Opportunities for growth within operations and quality control Supportive, team-focused work environment

Quality Control Inspector Immediate need for a Quality Control Inspector for a manufacturing and construction company in Miami, FL to join our team. The ideal candidate will play a crucial role in ensuring that our products meet or exceed industry standards and customer expectations. RESPONSIBILITIES: * Ensure all products and processes comply with AISC, company, and industry quality standards. * Inspect raw materials, in-process components, and finished steel products through visual checks, measurements, and NDT methods to verify conformance to specifications. * Perform inspections on fabricated and erected steel structures to confirm compliance with design and detailing requirements. * Document and report inspection findings, nonconformities, and root cause analyses; collaborate with production and engineering teams to implement corrective and preventive actions. * Participate in design and scope reviews, validation, and final product approval processes. * Maintain quality documentation, inspection records, and provide data for management review meetings. * Support continuous improvement initiatives to enhance product quality, process efficiency, and safety compliance. * Ensure adherence to all AISC quality assurance procedures, regulatory requirements, and company safety policies. * Contribute to training, audits, and professional development activities as needed. QUALIFICATIONS: * 2+ years' experience with Structural Steel required. * Knowledge of AISC Process. * Detail oriented with ability to multi-task in a fast-moving environment with shifting priorities and changing requirements. * Fluent in the English language, in both oral and written form, required, bilingual in the Spanish language preferred. * Leadership abilities and able to identify and resolve problems. * Strong proficiency with Microsoft Office tools required. * Proficient in the ability to read and interpret drawings and technical documentation; and * Ability to work well under pressure and be able to assist in expediting shipments when necessary, working in conjunction with Production and Shipping schedules. * Ability to foster and promote a positive work environment. EDUCATION/TRAINING/EXPERIENCE: * 3+ years of responsibility in quality management required; within a manufacturing environment preferred. * Experience working in a manufacturing environment preferred. * Must have experience using various mechanical inspection tools, such as computers, micrometers, height gauge, radius gauge, pin gauges, protractors, and calipers. * Experience working with machined parts, assemblies, and/or sub-assemblies preferred. * Civil or Industrial Engineer preferred. BENEFITS: * 401(k) with matching contributions * Health insurance (medical, dental & vision) * Paid time off

Job Description Employment Solutions has an IMMEDIATE need for Quality Assurance Inspector to work in the west Sunrise area. Our client has been in business for over 15 years and they manufacture, repair and distribute various aviation survival and emergency products throughout the world. Hours: 6am - 2:30pm Monday to Friday Pay: $21.00 per hour Aviation Quality Control Inspector (Simplified Description) This role checks aircraft parts and work to make sure everything is safe, correct, and meets FAA rules, customer requirements, and company standards. The inspector helps keep the repair station compliant and safe. What You'll Do Inspect aircraft parts and repairs to confirm they are airworthy. Use inspection tools and follow approved inspection methods. Read manuals, drawings, and FAA rules to verify proper work. Find and clearly record any problems or defects. Review maintenance paperwork before parts are approved for return to service. Enter inspection results into computer systems. Work with technicians and supervisors to keep work moving smoothly. What You Need High school diploma. FAA A&P or Powerplant license. At least 18 months of inspection experience. 5 or more years working in aviation maintenance or repair stations. Good understanding of aircraft safety and airworthiness requirements. Ability to communicate clearly and stay organized. Basic computer skills. Comfortable using measuring and inspection tools. Able to work independently with minimal supervision. Physical Requirements Able to lift up to 50 pounds. Able to bend, kneel, climb, and work in tight or awkward spaces. Comfortable working around noise, chemicals, and wearing required safety gear.

Job Description Job Title Quality Control Inspector Schedule: Monday-Friday 3:30pm - 12:00am. Company Snapshot: Born in Miami more than a quarter of a century ago, Tuuci is the global leader in premium shade and placemaking products for hospitality, commercial, and residential outdoor settings. From locations in North America, Europe and Asia, our teams strive to meet and exceed the Tuuci vision: to help people live their best life outdoors through inspiring design, enduring performance, and convivial service. We work in a fun, fast-paced, and diverse environment in which close collaboration and the spirited exchange of ideas are encouraged. Our culture supports our vision by encouraging creativity, driving excellence, and supporting personal growth and development. Position Summary: Tuuci is searching for a team member who embodies passion and performance in the Quality Control department. The Quality Control Inspector position inspects raw materials, finished products and the procedures of the entire production cycle to ensure efficiency and consistency. Other responsibilities include but not limited to: Essential Duties and Responsibilities: Conduct audit inspection on the in-process, process procedure and finished goods products by confirming specifications using drawings and procedures. Approve or reject raw materials with respect to quality standards. Document inspection results by completing reports and logs. Assist in determining the root cause and the implementation of a corrective action. Organize the disposition of rejected materials and log all rejected materials. Measure products with rulers, calipers, gauges, or micrometers. Monitor operations to ensure that they meet production standards; recommend adjustments to the production process. Document the QC results by preparing reports of the findings; ensure materials are checked in with the required paperwork and is in proper condition. Maintain safe and healthy work environment by following standards and procedures. Assist in the development of SOPs. Other tasks as assigned. Education and Qualifications: We prefer candidates with 2 years of quality control, receiving and inspection experience. Experience working in warehouse or manufacturing environment. Experience with reading engineering drawings, measuring tools and proficiency in MS Word and Excel. Lift up to 45lbs. Must be Fluent in English and Spanish. This is a full-time, night shift position hours are Monday through Friday from 3:30pm to 12:00am and occasionally require overtime up to 2:30am and Saturdays. Tuuci is an equal opportunity employer. All applicants and employees are to be treated equally with the same rights and privileges with respect to recruiting, hiring, promotions, demotions, transfers, separations, compensation, and benefits regardless of their age, race, color, creed, religion, or ethnic origin, sex, sexual orientation, pregnancy-related status, marital status, veteran status, physical or mental disability, where the individual is otherwise qualified, or any other category protected by applicable law. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9. ************* Company DescriptionTuuci is headquartered in Miami, FL and is the market leader in design, manufacture, and sale of commercial shade equipment, including market umbrellas, cabanas and related accessories. Tuuci products are manufactured primarily in Miami with global distribution supported by offices in The Netherlands and Vietnam. We are proud to be the preferred shade manufacturer for international luxury brands like Four Seasons, Ritz Carlton, Soho House etc. as well as domestic staples like Starbucks, Chipotle and Panera Bread. Tuuci was created in 1997, but we have not outgrown our collaborative start up culture. We work in a fast-paced, fun environment where the exchange of ideas and professional growth are encouraged. We are looking for fresh new talent to join and enhance our team and build a career within a growing company.Company DescriptionTuuci is headquartered in Miami, FL and is the market leader in design, manufacture, and sale of commercial shade equipment, including market umbrellas, cabanas and related accessories. \r \r Tuuci products are manufactured primarily in Miami with global distribution supported by offices in The Netherlands and Vietnam. We are proud to be the preferred shade manufacturer for international luxury brands like Four Seasons, Ritz Carlton, Soho House etc. as well as domestic staples like Starbucks, Chipotle and Panera Bread.\r \r Tuuci was created in 1997, but we have not outgrown our collaborative start up culture. We work in a fast-paced, fun environment where the exchange of ideas and professional growth are encouraged. We are looking for fresh new talent to join and enhance our team and build a career within a growing company.

For nearly 30 years, DASI has been in the business of providing comprehensive aircraft inventory support for airlines, MROs, OEMs, and distributors. Headquartered in Miami, Florida, with service centers in London and Singapore, DASI is a truly global partner, serving customers' parts and inventory needs in more than 140 countries. DASI is embracing the potential of online sales and their digital marketplace, which has been growing exponentially and has tremendous potential with the right technology team in place to support and take it to the next level. Purpose: At DASI, the role of the QC Inspector is to ensure that all incoming and outgoing material is being checked for compliance to customer and/or DASI standards. Key accountabilities: Investigate NCM (Nonconforming Material). Control the segregation and proper disposition of material designated by the Material Review Board. Collect data for QA to use in training and performance evaluation of inspection staff. Coach Inbound and/or Outbound inspection teams to recognize errors and areas for improvement. Scrap process as required. Participate in Continuous Improvement Projects (CPAR's). Perform all other duties as assigned. Key skills and competences: Focus on delivering exceptional customer service. A pro-active team worker with warehouse experience ideally in an aerospace related business Ability to be flexible, responsive and enthusiastic. Able to cope well under pressure and resolve issues and problems using their own initiative. Able to work effectively to tight deadlines and targets. Looking for a challenging role in which they can develop personally and professionally. Results driven, taking pride in achieving objectives. Ability to work in a fast-moving environment where a pro-active, can-do attitude is needed to achieve goals. Experience and qualifications: High school diploma or equivalent required. Minimum 2 years of processing aviation surplus parts is required. ISO and/or AS Quality Standard knowledge, a plus. DASI, LLC. and group companies are an Equal Opportunities Employer

CAP Government, Inc. is seeking the immediate hire of a licensed QC Multi-Disciplined Code Inspector needed for construction project inspection and plan review services. The work involves interpreting and applying these regulations to customer relations, reviewing building construction blueprints, product approvals, shop drawings, and other project documents. Some travel may be required for inspections and/or managing projects in the assigned area. Candidates must possess a professional demeanor, have both technical and industry experience, and be a team player. Duties, Responsibilities, and Qualifications Demonstrates excellent communication and customer service skills. Will visit the job site full-time (M-F), 40 hrs. per week, performing the following minimum tasks: Reviewing, observing, and verifying that construction conforms to the scope of work identified by the approved construction documents Observing and verifying that construction conforms to all applicable codes, standards, and guidelines, including the applicable International Codes, local codes, and DoD Standards. Writing/Updating field reports. Experience with MS Office (MS Word) is required. Experience with MS Excel and Adobe Acrobat is highly recommended and desired. Taking photos of construction progress Uploading photos and field reports to our file sharing website for viewing by client Reporting on removal or repair of defective or unsuitable work Reviewing contractors' monthly payment applications and recommending payment to owner Completing a monthly Design & Construction Status Report and distributing to the client Issuing Certificates of Occupancy and/or Certificates of Completions Verifying completion of punch lists Perform other related duties as assigned by the Manager Education/Experience: State of Florida Plan Review License (PX) or provisional license in building, electrical, mechanical, and/or plumbing; or State of Florida Inspector License (BN) or provisional license in building, electrical, mechanical, and/or plumbing, or ICC Residential & Commercial Plans Examiner and/ or Inspection certification in building, electrical, mechanical, and/or plumbing; or Minimum 5 years of experience performing code compliance inspections is required Bachelor's degree in the construction or design field is desirable 3 years in construction administration or superintendent/construction manager role is desirable Experience in managing construction projects as an architect, superintendent, project manager, or similar role, specifically during the construction administration phase of a project is desirable Must have knowledge of the Florida Building Code and other regulations pertaining to construction and development. Ability to understand and interpret codes and evaluate project proposals and projects under construction to verify conformance with code requirements. We offer competitive compensation packages; medical, dental, and vision coverage; life insurance, short- and long-term disability insurance; 401(k); employee referral; educational reimbursement; and more. Salary: Commensurate with experience and licensure Equal Opportunity Employer / Drug-Free Workplace / Veterans Our firm is committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability, protected veteran status, gender identity or any other factor protected by applicable federal, state or local laws.

Job Description Please note: While aviation experience is preferred, we welcome candidates with equivalent quality control experience in parts inspection, shipping, receiving from other industries. The duties and responsibilities listed represent tasks commonly performed. PRINCIPAL DUTIES (Essential Functions): - Performed with minimal supervision 1. Responsible for performing incoming and outgoing inspections of aircraft parts and required documentation to meet the customer's requirements and the safety standards of the Quality Management Program. 2. Performs receiving inspection functions as prescribed in the Quality Manual. Utilizes pick ticket, retrieves part and performs a visual inspection of packaging looking for damage and identification. 3. Verifies all certifications and packing lists are accurate. Records and communicates any discrepancies or improvement opportunities. 4. Inspects and identifies material and related documentation as prescribed by the purchase order/sales order and customer specifications highlighting any nonconformance or omission. 5. Reviews part number, model number, serial number, description, quantity, condition and all trace documentation to ensure compliance. 6. Completes inspection checklist and logs ensuring accuracy then posts into the Pentagon database. 7. Sorts and places materials or items on racks and shelves in shipping area or other designated areas. 8. Creates imaging data capturing the parts condition. 9. Fills orders to be shipped to customers and creates packing slip and invoice. 10. Prepares orders and assures that all material is properly packaged for adequate protection from the environment or damage. 11. May handle hazardous materials when required. 12. Builds pallets when required. 13. Processes shipments online using FedEx, UPS and DHL tracking software. 14. Satisfies internal/external customer shipping deadlines. 15. Administers vendor and carrier contracts to ensure provision of agreed upon service(s) and/or product(s). 16. Assists the team in resolving complex inventory discrepancies to determine root causes of inventory discrepancies and develop recommendations for corrective action. 17. Maintains competent knowledge of all customer requirements and quality standards. 18. Assist with processing drop shipment documentation. 19. Other duties as assigned. Shipping/Receiving Inspector - Level I MINIMUM REQUIRED QUALIFICATIONS - Ø High school or equivalent Ø Typically, 2+ years of experience in warehouse, stockroom, and/or shipping/receiving Ø Minimum 1 year aviation industry experience in inspecting aircraft parts and paperwork Ø Computer skills necessary to operate word processing, spreadsheet, database, and web-based applications Ø Good verbal and written communication skills able to read, send, and execute instructions via email Ø Speak, understand, and follow directions in English Ø Able to lift up to 45lbs Company DescriptionFounded in 1996, Owl Aerospace is committed to providing its customers with innovative solutions. We are a leading provider of high quality aircraft engines, air frame spare parts and aviation services to domestic and international carriers as well as cargo and commuter airlines.Company DescriptionFounded in 1996, Owl Aerospace is committed to providing its customers with innovative solutions. We are a leading provider of high quality aircraft engines, air frame spare parts and aviation services to domestic and international carriers as well as cargo and commuter airlines.

Miami Air International, with its modern fleet of Boeing 737 aircraft, is the premier provider of private group air transportation, commonly called chartered flights. It's not just a flight. This is a travel experience that is tailored to delight your group. We understand that each group is unique and personalizing the right services and flight amenities is critical, and at the heart of why you are considering a charter. All we do is charter. And we do a lot! Our business is built to only serve groups like yours, and you are our number one priority. In addition to concentrating our efforts on being the best in those things you want from any airline - like industry leading safety-programs and over 25 years of proven reliability and financial stability - we provide a suite of services unparalleled by any other airline. Sound like a match? You're in luck. Miami Air is currently seeking a highly motivated and personable individual to join the company as a Quality Control Inspector responsible for the efficient and economic determination of the airworthiness of aircraft, engine, appliance and component maintenance actions as assigned, and conduct inspections in accordance with the Maintenance Program, AD, SB or other requirement to ensure aircraft, engines, appliances and components are maintained to a prescribed standard in order to continue their airworthiness. Functions & Responsibilities Perform preliminary, in progress, hidden damage, and final inspections. Performs special inspections as detailed by the requesting or requiring document. Performs Required Inspection Item (RII) and Buy Back inspections. Perform receiving inspections to ensure the use of legal, conforming and applicable parts and materials. Ensure that inspections and surveillance are performed as required on necessary maintenance actions in order to assure the use of approved data, material, tools, test equipment and that high standards of workmanship are present. Provide guidance and assistance to maintenance personnel in order to train, maintain and enhance compliance to programs, policies and procedures. Conduct daily audits of aircraft work packages including checks/inspections forms, log pages, routines and non-routines, modification orders, etc. to ensure completion, correctness, use of appropriate references to approved data in all entries and forms. Review the aircraft and engine logbooks, using the same criteria as described in item f above, at checks and during accomplishment of any maintenance. At the appropriate checks, transcribes all pilot reports and deferred maintenance items to the appropriate work forms. Conduct records analysis of audits and reviews of data/information for continuing analysis and surveillance reports as identified by the Manager, QC/QA & Training. Lead and maintain the current the Structural Defect Log as assigned. Review and address the calibrated tools and equipment status and shelf-life status and ensure correction of any discovered discrepancies during the first 10 days of each month. Perform as a “Designated Instructor” in areas and/or on subjects as qualified and approved by the Manager, Maintenance Training and QA. Perform the inspections of S.O.S. Tag items and documents results per the S.O.S. program. Complete safety and housekeeping checks of hangar and line work areas on a routine basis as designed and assigned by the Manager, QC/QA & Training. Perform other duties as necessary within the scope of quality. Qualifications & Requirements Associate degree A&P Mechanic License Airman's Certificate with A&P ratings for a minimum of 3 years. 3 years of experience as licensed A&P mechanic with 2 years of maintenance experience on large aircrafts. Boeing 737 experience, Classic and NG preferred. ETOPS and RVSM operations experience. Knowledgeable of the FARs, GMM, Maintenance Programs. Excellent written and oral communication skills. Proficient with Microsoft applications. Knowledge of TRAX systems, a plus. Knowledgeable of manuals and publications skills, a plus. Miami Air International provides equal employment opportunities to all legally eligible and authorized to work applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Title: Dock QC Inspector Reports to: QC Manager Type: Full-Time | Onsite | Non-Exempt Pero Family Farms is a market share leader with over a century of dedication, commitment and integrity. Operating since 1908, Pero is the farm trusted by retailers and consumers alike. We are a fully integrated farming operation, with departments that specialize in organic farming, logistics, global supply chain management, national sales operations, food processing operations, and strategic marketing functions. Our operation includes over 35,000 acres spanning across the East Coast of the United States from Florida to New York, with distribution and production facilities in several different states. We pride ourselves in maintaining a strong family heritage and tradition that has been dedicated to quality, innovation, and excellent customer service that has been feeding America's families for over a century. Our family's passion for farming remains unwavering, with a vision to continue the tradition for many generations to come, whilst maintaining the reverence and trust it has established with the American consumer. As we expand our offering to include an assortment of organic vegetable options; we have become one of the largest organic vegetable growers in the country and we are looking to grow our workforce family. Join us in continuing and strengthening our position as a market share leader dedicated and trusted by retailers and consumers alike. JOB SUMMARY Assure consistent product Safety and Quality by testing, measuring and verifying raw materials. Performance of procedures that comply with stated corporate mission and strategic plan, corporate policies, and customer product specifications. Requirements RESPONSIBILITIES AND DUTIES Color, Sizing and grade evaluation of fresh perishable produce Calibrations on weight scales, thermometers and all applicable testing tools or detectors G.M.P. monitoring of operation to assure food safe environment Color code enforcement; sanitation, organics handling, allergen control Hold and release program Rework Program Shelf-life evaluation and sensory testing as required Paperwork, filing, notifications and data entry for Team site/Quality System Other duties as required SKILLS Good communication skills, including basic written and spoken English, to ensure understanding of safety procedures and documentation Basic computer skills Microsoft Office: Excel, Word A working knowledge of English and basic math Ability to collaborate with management PHYSICAL & ENVIRONMENTAL CONDITIONS Required to stand, sit, walk for long periods of time Frequent use of hands for simple, firm grasping and writing Frequent bending, stopping, reaching, climbing Frequent lifting, carrying 5 pounds to 50 pounds Frequent use of cutting utensils (i.e. knives, peeler) Exposure to product fumes such as onions, peppers, etc. Exposure to varying temperatures of 45 degrees or less Exposure to chemicals such as chlorine, etc. Works overtime as required EDUCATION & EXPERIENCE Minimum High School education / G.E.D. preferred or applicable certification Understanding of Produce Standards, and or basic produce experience preferred Must be able to drive to outside locations for inspections; required for dock staff COMPANY BENEFITS/PERKS 401(k) Health, Dental, Vision Insurance and more Paid Time Off (PTO) The company (Pero) reserves the right to alter, amend, expand or contract these duties and responsibilities as the companies needs evolve.

Immediately Hiring: Quality Control Inspector (Manufacturing / First Shift) Company: Dayton-Granger, Inc. Industry: Aviation and Aerospace Component Manufacturing Shift: 1st Shift, 6 or 7am start time, Monday - Friday Hours: Full-Time, 40 hours a week. Direct Hire, Competitive Pay, Great Benefits, Work-Life Balance Position Overview: Dayton-Granger, Inc. is seeking a skilled Quality Control Inspector to join our aerospace manufacturing team in Fort Lauderdale, FL. In this role, you'll perform inspections on in-process and finished assemblies, sub-assemblies, and components to ensure they meet rigorous quality standards. Using precision tools such as calipers, micrometers, and height gauges, you'll verify critical dimensions, review blueprints and engineering changes, and maintain accurate inspection records. Your attention to detail will directly contribute to the production of advanced avionics products for commercial, general aviation, and military programs. As a key member of our growing team, you'll enjoy the stability of a company with over 82 years of proven success, a collaborative environment where your expertise is valued, and clear opportunities for long-term career growth in aerospace. Located just four miles from Fort Lauderdale's sunny beaches, DG offers competitive pay, excellent benefits, and a supportive culture where we work together as one crew. Key Responsibilities: Inspects in-process and/or finished production assemblies and sub-assemblies for conformance to quality assurance standards. Performs tasks from blueprints, engineering change notices, or established operating procedures. Determines acceptance, rejection, or rework requirements of unit. Prepares and maintains inspection reports and records. Performs additional tasks assigned by management Follows all DG safety procedures as per company policies and per the Facility Engineer/Safety Director Required Qualifications: High School Diploma or GED Minimum of one (1) year of experience as a Quality Inspector in a manufacturing environment within a highly regulated industry (e.g., aerospace, defense, automotive, medical devices, etc.). Hands-on experience with precision inspection tools, including calipers, micrometers, height gauges, and other measuring Instruments Familiarity with ERP systems Basic computer proficiency (Microsoft Word, Excel, Outlook, and other relevant software Strong verbal and written communication skills in English Ability to lift, push, and pull up to 25 lbs Visual requirements include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus Why You'll Love Working Here: We are a multi-generational team with members representing a diversity of cultures, educational backgrounds, experience levels and ideas all 'making it happen' from one location in beautiful, coastal South Florida. We are a long-standing supplier providing cutting edge products in support of long term aerospace programs, while at the same time developing new products to meet the needs of new customers, programs and up and coming markets. Additionally, DG loves its employees! The average employee tenure is around 8 years. Length of service milestones are celebrated company-wide and employees may make selections of anniversary gifts. Benefits Affordable comprehensive insurance coverage (Medical, Dental, Vision). 401(k) match. Paid Time Off (PTO) and paid holidays. Mental health benefits. Complimentary life insurance with the option for supplemental coverage. Paid parental leave Short-term and long-term disability coverage. Excellent work-life balance. Tuition reimbursement. Dynamic and collaborative work environment. On-site gym. Access to advanced technology and resources. Length of service/milestone anniversary gifts. Team-building activities. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This position requires use of or access to information subject to the Export Administration Regulations (“EAR') or the International Traffic in Arms Regulations (“ITAR'). Accordingly, all applicants must be U.S. persons within the meaning of these regulations. Under ITAR, a U.S. person is defined as a U.S. Citizen, U.S. Permanent Resident, or a person who is a protected individual under the Immigration and Naturalization Act (8 U.S.C. 1324b(a)(3)).

Job DescriptionDescription: QUALITY CONTROL BENCH INSPECTOR Responsibilities include but are not limited to: Reading and adhering to the published Workscope, as revised. Performing Receiving Inspection of incoming engines to identify visual non-conformances on the engines as-received. Documenting discrepancies (Damage Report) and generating Non-Routines, Manila Tags or 227's as required to initiate the repair of the noted discrepancies per SOP 14-006 R1. Performing Incoming & Outgoing Inventory Inspection of LRUs. Perform EMU and/or piece part inspection of disassembled engines, identifying and documenting non-conformances. Recording the status of all inspected parts on the QC 227C (Unserviceable and Serviceable parts alike), and proper routing of parts to restore them to serviceable condition in a timely and accurate manner. Routing parts to Outside Vendors and accurately documenting identification data and work required in Quantum. Also responsible for overseeing maintenance actions in progress and documenting required data on maintenance forms as maintenance actions are accomplished. Minimum Job requirements: Minimum FAA “P” Certificated; 2 years Minimum CF6 engine experience; Ability to navigate the OEM Manuals and to read and understand technical data; must have working knowledge of the Quantum Operating System. Requirements: MINIMUM REQUIREMENTS: Must possess a valid FAA A&P or Powerplant Certificate Read & Write English Able to Read and Comprehend OEM Engine Manuals, IPC's, SPM's, AMM's and other Approved Data 2 Years' Experience on CF6 Engines (is a plus) Computer Skills Able to use MS Outlook (Email), Word & Excel Must be COACHABLE (Able to Listen, Learn and Follow Instructions) / Have a Good Attitude / 2 Years with CTS Engines ** Applicants must be U.S. Citizens or Permanent Residents to be considered, we don't have sponsor plans at the moment**

GotWorX, Inc. Is currently seeking a Quality Control Inspector for our client based in the Tamarac area. This is a temp-hire opportunity for the right candidate. Client is currently offering a salary of $ 18 pay rate, plus a benefits package once perm employee! Overview: The Quality Control Inspector ensures that incoming, in process, and finished parts are within all required specifications per drawings and work instructions. It is the Quality Control Inspector s responsibility to implement good documentation practices (GDP) and proper material identification, preventing nonconforming material from continuing through the process without proper approval, to ensure that the customer gets parts that function properly every time. Responsibilities: Performs area specific internal quality audits Performs area specific 5S audits Performs random in-process audits in designated areas Performs first piece inspection audits for team members as required Maintains and stores inspection equipment appropriately Verifies presence of calibration sticker before using measurement device Notifies manager of equipment with past due calibration Notifies manager of calibrated items that need attention Reviews and provides feedback on procedures, policies, and processes Applies proper sampling methods (AQL) managing risk and cycle time Interprets and inspects mechanical drawings (GD&T literate) Maintains all inspections records or other required documentation Coordinates, implements, and documents containment actions Actively supports conducting root cause investigations In order to be considered, we require: High School Diploma or GED required Prior experience in quality control field preferred Prior inspection experience preferred Prior forklift experience preferred Prior machining / CNC experience preferred Prior SAP experience preferred Candidates will be required to complete a background check and drug screen before beginning work.

Job Purpose The QC Labeling Inspector is responsible for maintaining a high level of inventory accuracy and integrity within the Tissue Bank. Performs final product labeling and inspections, manages transport and storage of quarantine tissue, and maintains labeling supplies. Promotes Lean Behaviors across the organization (This includes Participating in Try storming, Brainstorming and Lean Related Initiatives). Promotes Usage of Problem Solving. Ensure that Labeling Operations are in Compliance with the State and Federal Regulations and AATB Standards. Duties and Responsibilities Preparation of the QC Labeling areas as specifically described in SOPs. Performs final inspection of products for proper specifications, label accuracy, and compliance with applicable regulations, standards and Vivex Biologics, Inc. quality requirements. Combines components for final products. Applies labels to final product and adds package inserts, boxes, etc. Maintains accurate inventory of post-processing, quarantine products (frozen and room temperature). Performs disposition of nonconforming products as directed. Coordinates and stages products for sterilization. Monitors freezers and responds to alarms. Supports nonconformance investigations, when applicable. Maintains knowledge of applicable regulations and standards related to storage, handling, labeling and inspections of tissue. Maintains effective communication with management when issues arise to obtain appropriate instructions to address the issues. Performs other duties as assigned by management. Requirements Qualifications High School/Minimum of 4 Years of Relevant Experience. Associate/Minimum of 1 Years of Relevant experience. Bachelors/Minimum of 0-1 Years of Relevant experience Working Conditions Work is indoors in environmentally controlled conditions. Overtime may be required to meet production deadlines. Some on-call and weekends may be required. Physical Requirements Able to stand for extended period. Able to lift 25 lbs. without assistance. Must be able to infrequently lift, push, pull and carry boxes weighing up to 25 pounds. Walk, squat and bend over for intervals of 15-30 minutes, with or without reasonable accommodation. Direct Reports No direct reports. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job any time. Vivex Biologics, Inc. is an equal opportunity employer (EEO) and expressly prohibits any form of workplace discrimination and/or harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfers, leaves of absence, compensation and training. Vivex Biologics, Inc. with the Americans with Disability Act (ADA) which prohibits discrimination against qualified individuals with disabilities who, with or without reasonable accommodation, can perform the essential functions of a job.

LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI's propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Lead Inspector(s) are responsible for the direct supervision performing preliminary, hidden-damage, in-process, final Inspections, and perform return to service functions on all civil aviation articles received by this repair station in accordance with the current technical data provided in the manufacturer's instructions for continued airworthiness, operator technical data, service bulletins, service letters, airworthiness directives, government and industry standard practices, and other data acceptable and/or approved by the FAA. Responsibilities: * Supervise and coordinate inspections of the maintenance, preventive maintenance, or alteration of a powerplant, aircraft or appliance, or a part thereof, received at this repair station. * Supervise and coordinate inspections and required inspections in accordance with the methods, standards, and limits required by the accepted or approved data to determine that the work was satisfactorily completed. * Audit all inspection paperwork for completeness, task compliance, and deliver finalized documents to Records Dept. * Assist and train new inspectors perform inspection tasks as specified on Company job cards, repair and routing travelers recording discrepancies as required. * Audit corrective action entries, including installed parts/material tags, tools and equipment used, proper signoff and references. * Supervise and coordinate receiving inspection on incoming parts, materials, and tooling to ensure Company standards and requirements are met and generate the applicable identification tags. * Assist in the development and training of new inspectors. Qualifications: * High School or equivalent and basic computer skills * Airframe and Powerplant license * Must possess exceptional attention to detail and proficiency in the inspection methods, techniques, aids, tools, and equipment used in aircraft jet engine maintenance. * 3 - 5 years experience in a lead role for an aircraft jet engine maintenance. * Experienced with borescope inspection and interpretation of technical data during the borecope process. * Familiar with all regulatory requirements that govern the maintenance of aircraft jet engine. * Must be able to communicate Inspection Priorities to inspection personnel in a clear and concise manner. * Be able to read, write, speak, and understand the English language. * Must be legally authorized to work in the U.S Job Demands: Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws. 2nd Shift: 2:30pm-11:00pm

Miami Air International, with its modern fleet of Boeing 737 aircraft, is the premier provider of private group air transportation, commonly called chartered flights. It's not just a flight. This is a travel experience that is tailored to delight your group. We understand that each group is unique and personalizing the right services and flight amenities is critical, and at the heart of why you are considering a charter.

Job DescriptionDescription: Title: Dock QC Inspector Reports to: QC Manager Type: Full-Time | Onsite | Non-Exempt Pero Family Farms is a market share leader with over a century of dedication, commitment and integrity. Operating since 1908, Pero is the farm trusted by retailers and consumers alike. We are a fully integrated farming operation, with departments that specialize in organic farming, logistics, global supply chain management, national sales operations, food processing operations, and strategic marketing functions. Our operation includes over 35,000 acres spanning across the East Coast of the United States from Florida to New York, with distribution and production facilities in several different states. We pride ourselves in maintaining a strong family heritage and tradition that has been dedicated to quality, innovation, and excellent customer service that has been feeding America's families for over a century. Our family's passion for farming remains unwavering, with a vision to continue the tradition for many generations to come, whilst maintaining the reverence and trust it has established with the American consumer. As we expand our offering to include an assortment of organic vegetable options; we have become one of the largest organic vegetable growers in the country and we are looking to grow our workforce family. Join us in continuing and strengthening our position as a market share leader dedicated and trusted by retailers and consumers alike. JOB SUMMARY Assure consistent product Safety and Quality by testing, measuring and verifying raw materials. Performance of procedures that comply with stated corporate mission and strategic plan, corporate policies, and customer product specifications. Requirements: RESPONSIBILITIES AND DUTIES Color, Sizing and grade evaluation of fresh perishable produce Calibrations on weight scales, thermometers and all applicable testing tools or detectors G.M.P. monitoring of operation to assure food safe environment Color code enforcement; sanitation, organics handling, allergen control Hold and release program Rework Program Shelf-life evaluation and sensory testing as required Paperwork, filing, notifications and data entry for Team site/Quality System Other duties as required SKILLS Good communication skills, including basic written and spoken English, to ensure understanding of safety procedures and documentation Basic computer skills Microsoft Office: Excel, Word A working knowledge of English and basic math Ability to collaborate with management PHYSICAL & ENVIRONMENTAL CONDITIONS Required to stand, sit, walk for long periods of time Frequent use of hands for simple, firm grasping and writing Frequent bending, stopping, reaching, climbing Frequent lifting, carrying 5 pounds to 50 pounds Frequent use of cutting utensils (i.e. knives, peeler) Exposure to product fumes such as onions, peppers, etc. Exposure to varying temperatures of 45 degrees or less Exposure to chemicals such as chlorine, etc. Works overtime as required EDUCATION & EXPERIENCE Minimum High School education / G.E.D. preferred or applicable certification Understanding of Produce Standards, and or basic produce experience preferred Must be able to drive to outside locations for inspections; required for dock staff COMPANY BENEFITS/PERKS 401(k) Health, Dental, Vision Insurance and more Paid Time Off (PTO) The company (Pero) reserves the right to alter, amend, expand or contract these duties and responsibilities as the companies needs evolve.