Quality inspector jobs in Michigan - 419 jobs

Delta does not provide immigration-related sponsorship for this role. do not apply for this role if you will need delta immigration sponsorship now or in the future. This includes direct company sponsorship, entry of Delta as the immigration employer of record on a government form, and any work authorization requiring a written submission or other immigration support from the company (e.g., H-1 B, OPT, STEM OPT, CPT, TN, J-1, etc.). Delta Research an Aerospace company is an AS9100 and ISO9001 registered facility which manufactures Gear Products, Prototype/ Production, and Transmission Builds. In addition, we provide contract gear and CMM inspection services. We are also a NADCAP approved non-destructive testing facility and currently provide Magnetic Particle Inspection (MPI) and Nital Etch. This position is for 1st Shift 6:00 a.m. - 2:30 p.m. Tasks: CMM Inspection - Support the Quality and Manufacturing departments with 1st Piece Inspection, In-Process Inspection and Final Inspection of finished parts. Use of manual handheld inspection tools such as micrometers, gages and other inspection equipment while CMM is running longer cycles times. Program next job(s) in line while CMM is checking parts. Perform layout inspections, first piece approvals, in-process inspections, and other aspects of inspection through-out the manufacturing process. Other quality related duties as assigned. Qualifications: Understanding of GD&T required Prior CMM Programming Experience CMM Programming experience using Open DMIS or similar preferred Experience in a job shop or a manufacturing environment. Knowledge of Inspection tools and best practices. Positive, can do, attitude with great attendance. Delta Gear and Delta Research are manufacturing facilities that produce Prototype, Development and Production gearing for the Aerospace, Defense and Electric Vehicle markets. All the Delta Family of Companies are Equal Opportunity Employers without regard to race, religion, color, national origin, age, sex, disability, or veteran status. The Delta Family of Companies offer competitive compensation packages, excellent Health Insurance, Prescription Drug Coverage, Dental, 401(k), and Vacation. Delta offers a clean, safe, state of the art, work environment. We also offer training and room for advancement. Applicants must be U.S. Citizens or have permanent Resident Status due to our ITAR business restrictions. Apply online today at: **************************

Cardinal Staffing is looking for 3 Quality Team Leads. Do you have an eye for detail and quality, are you a natural leader and enjoy traveling? If so, this may be the job for you! We have 3 shifts, (1st shift 6am-2pm, 2nd shift 2pm-10pm, and 3rd shift 10pm-6am). Monday-Friday with weekends. You must have flexibility to cover multiple locations between Auburn Hills and St Clair Shores and help cover different shifts. We are looking for someone that is Reliable, Responsible and Dependable. Pay is between $20-22/HR Job Description: * Inspect raw material and/or parts, audit production practices and processes, and report on non-conformances. • Accurately inspect raw materials and products visually, as well as with gauges, scales, or other measurement instruments as required and according to work instructions • Segregate non-conforming parts or material • Complete required documentation for work performed • Perform data entry of work results into appropriate databases • Perform final inspection to reconcile outgoing shipments, as required • May be required to identify causes of non-conformance • Meet all TKMNA employee attributes and competencies Qualifications: Minimum Requirements: • High school diploma or equivalent • Ability to read and write English and perform basic math problems • Ability to learn correct use of basic measurement instruments (tape measure, scales, gauges) • Basic computer knowledge to complete data entry • Attention to detail and accuracy • Ability to accurately inspect basic material, commodities, and/or processes* Travel Preferred requirements: • Prior experience using basic measurement instruments • Prior experience in a quality assurance inspection position About Cardinal Staffing Services: At Cardinal Staffing, a Surestaff Company, we are dedicated to helping individuals unlock their career potential through meaningful job opportunities. As a leading staffing agency in the light industrial and manufacturing space, we pride ourselves on connecting talent with top employers across the Midwest. We understand that finding the right job is about more than just a paycheck - it's about finding the opportunity that fits your skills, goals, and lifestyle. Here are the benefits you'll enjoy when you partner with us: Access to a wide range of job opportunities Competitive pay Health and Wellness Programs (including EAP) Medical benefits including medical, vision, dental, and prescriptions Electronic weekly pay Employee Advocacy & Personalized Job Support Cardinal Staffing also follows all applicable state and local laws regarding sick time, paid time off, and retirement savings programs. Cardinal Staffing is an equal opportunity employer. Notice Regarding the Use of Artificial Intelligence in Employment DecisionsIn accordance with state mandates, we are providing this notice to inform all applicants and employees that artificial intelligence (AI) tools may be used at various stages of our employment processes. This may include recruitment, screening, hiring, promotion, or other employment?related evaluations.AI tools may assist in reviewing application materials, assessing qualifications, or supporting decision?making. These tools do not replace human judgment; rather, they are used to support consistent and efficient evaluation. Our commitment to speed-to-hire means we work efficiently to get you placed in the right role, fast. If you're ready to take control of your career, explore exciting opportunities, and gain experience that lasts, then Cardinal Staffing is the place for you. Let's get started today!#IND2

Quality InspectorTaylor, MI Company is a fabrication facility Shift: 1st shift: 7am to 3:30pm Monday-Friday w/ some OT on Saturday Must train on the 2nd shift 3p to 11:30p Pay: Up to $20/hr based on experience Essential Job Duties:Inspect parts for quality Inspected parts must meet QC and customer specifications. Must know how to read calipers and micrometers Reading blueprints is a plus Will have a quantity of parts expected to be inspected on each shift Other duties assigned by manager Safety Requirements Safety glasses Hearing protection if needed No loose fitting clothes Jewerly is not permitted Lots of opportunity for growth within the company. Contract to hire position

Job DescriptionJob Title: Quality Inspector Pay: $17/hour Shift: 1st shift We are seeking a Quality Inspector to join a 3rd party quality inspection company in Lansing. The successful candidate will ensure quality parts pass inspection and maintain accurate records.Responsibilities for the Quality Inspector: Inspect parts to ensure quality standards are met Maintain documentation and accurate records Ensure customers receive 100% certified parts Follow company work procedures for sorting, inspecting, reworking, and parts handling Review and understand job work instructions daily Requirements for the Quality Inspector: High school diploma or GED or history of successful work experience Experience in fieldwork and customer contact is valuable Highly developed organization skills Ability to communicate with team members and customers Ability to function in a stressful environment with time pressure Good eye for detail Work Environment: Quality inspection environment Physical demands not specified Benefits: Access to a personalized career consultant Healthcare Benefits Disability Insurance Advancement opportunities Opportunity for permanent hire How to Apply: Apply online or visit our office Equal Opportunity Employer.

Job Summary: Quality Control 3 is responsible for performing quality checks, and inspects materials, parts, and products at all stages of production. Quality Control 3 will make recommendations for improving processes and perform various analyses to evaluate the quality of raw, in-process and finished products. They will adhere to all Bandit safety, quality, inventory and production guidelines, standards, policies, and procedures. Duties and Responsibilities: Carry out quality assessment measures of all products ready to be shipped and incoming raw materials. Reject any product that fails to meet quality expectations and report issues/concerns to appropriate authority. Resolve any quality issues in a timely manner. Recommend improvement measures to production areas to ensure standards are being met. Knowledge of inspection, test, and measurement technique. Prepare documentation of the inspection process to ensure quality control standards are met. Examine finished product to ensure parts meet specification and quality. Knowledge of basic hand tools to put parts on. Other duties as assigned Qualifications and Education Requirements: High school diploma or GED At least two (2) years as a Quality Level 2 or previous work experience Ability to read a tape measure, basic shop math, and able to read a blueprint. Ability to use a tape measure and other measuring instruments. Basic written and verbal communication skills Complete Bandit's crane and/or forklift safety training Physical Requirements: Frequently stand, walk, push, pull, stoop, pinch, grasp, and/or bend Requires employee to work both inside/outside in heat/cold, and/or wet/humid conditions. Frequently required to use personal protective equipment (PPE) to prevent injury. Frequently lift 50 pounds Occasionally lift 60 pounds

Aerospace is soaring and so are we! Precision Aerospace Corp. (PAC) customers are high tech leaders in commercial and defense aerospace. Because of advancements in technology leading to significant fuel savings, the aerospace industry is positioned for unprecedented growth. We utilize leading edge technology and processes to make and deliver short run, high mix, close tolerance parts. Our customers value our track record of quality and delivery success and they are fueling our growth with new and interesting part manufacturing opportunities. Job Description To support the Quality Department's ability to achieve its goals. This includes accurately and timely auditing of company process, incoming material, work-in-process and customer shipments to achieve PAC Quality and Business objectives and to comply with AS 9100 standards. Other duties may be assigned as needed. Qualifications Perform first article (FAIR) tasks including documentation and reports. Perform 1st piece, in-process and last piece inspection using micrometers, calipers, comparators, various gauges and CMM equipment according to PAC standards and AS 9100 procedures. Submit PPAP documents. Perform incoming inspection tasks according to AS 9100 procedures. Perform final inspection and shipping tasks according to AS 9100 procedures. Perform process audits and follow-up with corrective actions. Ensure the quality of all material meets customer specifications through applicable quality policies, procedures and instructions. Cross train across multiple departments Perform data collection and communication tasks in ERP system and other applications. Perform miscellaneous quality-related clerical duties. Comply with all PAC policies. Additional Information Physical Requirements: Vision to AS 9100 standards documented by yearly vision exams. Able to stand, sit/or ambulate across the production space for long periods of time. Up to 95% of the scheduled shift. Effectively handle and manipulate parts in order to identify needed specifications. Effectively operate complex measuring instruments. Successful completion of a medical exam and drug screening required prior to employment at PAC. PAC is an equal opportunity Affirmative Action employer.

What Timken makes possible begins with you. Those who came before us helped land a man on the moon, create the world's infrastructure, and introduce renewable energy alternatives. Now you can join the Timken team to write your own unique story and help drive what's next. A career at Timken means you can have an immediate impact doing Work That Matters to the world- improving the efficiency of today's industrial equipment and preparing for the future of motion on our planet and beyond. New employees can start contributing right away, and there are many opportunities to advance your career at your own pace. Join our global team of 19,000 people in 45 countries, and start helping our customers push the limits of what's possible in their world of motion. Position Summary: This is a 1st shift position. The Inspector is responsible for the day-to-day completion of work assignments in compliance with Lovejoy's quality management system. The position requires a self-driven associate with quality systems body of knowledge. Responsible for applying lean manufacturing principals to help facilitated the ongoing support and execution of the quality management system. Essential Responsibilities: * Conduct and document receiving inspection, process inspection, and final inspection of product. * Conduct and document calibration of gages. * Control external calibration activities and documents. * Purchase gaging and quality supplies. * Conduct and document process audits (EASE). * Generate nonconforming product documents - work with purchasing or engineering on nonconforming material disposition. * Provide feedback to production and respond to the immediate needs of production by troubleshooting, assisting, and securing corrective action. * Perform special projects and assignments in support of the department or facility as defined by the Quality Manager. * Train production employees on proper use of gaging equipment and blueprint reading including GD&T. * Collect/analyze/report data to support key Quality metrics * Support failure analysis investigations to determine root cause of product/component failures * Ensure inspection equipment is suitable to meet the design intent and calibration is controlled. * Control record retention and organization of quality documents. * Complete first article (FAI) and final inspection and testing per military/government specification including completion/assembly of material certification, test reports, certificates of conformance and source inspection required documents. Technical/Functional Skills: * Experience in use of gages (metrology) * Experience in blueprint reading * Experience in GD&T * Experience in Gage calibration * Experience with vision inspection system and programs (e.g.: Keyence) * Proficiency with software packages (MS Office, and Statistical software) * Must have organizational, analytical, and planning skills * Ability to interface with all levels of the organization and customers * Effective communication and technical writing skills are required. Education and Experience: * High school diploma/GED required * Associates' preferred in quality control The pay range for this role is $21.00 - $28.00/hr and is commensurate on experience and education and could pay more or less than the posted range. This full-time position is eligible for paid time off, 401k, and comprehensive benefits package including medical, dental and vision. This position may require access to United States export controlled technical data ("CTD") and hardware under the Departments of US State (ITAR) and/or Commerce (EAR). Eligible candidates are; US Citizens, Green Card holders, Asylees or others eligible to receive US export license authorizations. Candidate must be authorized to work in the US. All qualified applicants shall be treated equally according to their individual qualifications, abilities, experiences and other employment standards. There will be no discrimination due to gender or gender identity, race, religion, color, national origin, ancestry, age, disability, sexual orientation, veteran/military status or any other basis protected by applicable law.

Why Us? At Par Health, we believe great healthcare is built on getting the essentials right. We're looking for passionate, talented individuals who share our commitment to improving lives. With 4,000+ team members worldwide, we lead with pride and purpose-prioritizing quality and safety while fostering a culture of continuous improvement, accountability, and teamwork. Elevating the Essentials isn't just our tagline, it's the higher standard we live by every day. Summary Handles and inspects components and filled product in accordance with Current Good Manufacturing Practices, Operating Procedures and Safety Regulations Documents and communicates functions and duties necessary to complete the manufacture of products produced in the Sterile Filling Department. Key Accountabilities - key outcomes/deliverables, the major responsibilities, and % of time Accountability Responsibilities % of Time Operational Performs all tasks as outlined in Batch Cards, SOPs and Job Aids Effectively demonstrates the ability to perform on automated lines Inspects finished product as required Packs-off product into trays and cases. Requires lifting weights of up to 35 lbs. Operates equipment as defined within the labor grade Maintains a smooth flow of production and monitors equipment as assigned 90% Issues Communicates to PMO or Supervisor in a timely manner any equipment or process deviations Continuous Documentation Documents in a timely manner all tasks requiring written records as specified in GMP regulations 10% Compliance Performs all functions in accordance with cGMPs, Corporate regulations, SOPs, and all other relevant regulations and standards Effectively demonstrates and understands the SOPs and job aids pertinent to each task performed Continuous Other Performs other duties as assigned by supervision Continuous Total 100% Qualifications Education & Experience Minimal acceptable level of education, work experience and certifications required for the job High school Diploma or GED from recognized institution or organization Successful completion of certified in house qualification programs Knowledge Proficiency in a body of information required for the job e.g. knowledge of FDA regulations, GMP/GLP/GCP, Lean Manufacturing, Six-Sigma, etc. Page 2 of 2 Customer Focus - Results Driven - Leadership - Teamwork - Innovation and Continuous Improvement Endo Job Description Template - Revised July 2014 Skills & Abilities Often referred to as “competencies”, leadership attributes, skills, abilities or behaviors that may be enterprise, functional or job specific e.g. coaching, negotiation, calibration, technical writing etc. Physical Requirements Physical & mental requirements e.g. lift 40 pounds, walk across plant/warehouse, business travel (% of time), driving as part of work responsibilities, etc. Required to reach with hands and arms and frequently required to use hands to finger, handle or feel. Occasionally lift and/or move up to 50 pounds Specific vision abilities required by this job include close vision Frequently exposed to moving mechanical parts Frequently exposed to toxic or caustic chemicals The noise level is moderate Work environment is a production/manufacturing environment Disclaimer: The above statements are intended to describe the general nature and level of work performed by employees assigned EEO Statement: We comply with all applicable federal, state, and local laws prohibiting discrimination and harassment, and provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or genetic information, or any other classification protected by federal, state or local law. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

DEPARTMENT: AbilityOne- Detroit Arsenal SUPERVISOR: Director, Contracts Gesher Human Services is a bridge to hope and opportunity for people at work, at home, and in the community. Gesher's workforce development, behavioral health, and inclusion programming serves all Metro Detroiters while meeting the needs of the Jewish community. GENERAL Perform daily quality inspections of contracted areas inside the Detroit Arsenal as well as identify potential and actual problem areas in the provided contracted services. Measures and updates quality standards as needed to ensure compliance with current contract. QUALIFICATIONS Required: High school diploma or equivalent. Other: Three to four years of janitorial experience with a documented work history performing custodial services preferred. Demonstrated experience in the performance of quality control Ability to work with individuals with disabilities Interpersonal skills sufficient to establish and maintain productive relationships that emphasize a customer focus as well as communicate effectively with participants, staff, government officials and public. Composition skills sufficient to prepare required reports Basic proficiency in Microsoft Word. Must be able to obit Department of Defense Security Clearance. Must be able to provide immunization records for Mumps, Measles, Rubella (MMR vaccine); Tetanus, Diphtheria, Polio (Tdap Vaccine) Hepatitis B; Varicella (Chicken Pox); and TB Skin test. Valid Michigan Drive License and a driving record must meet safe standards as established by Agency insurance carrier. DUTIES AND RESPONSIBILITIES Develop, implement and maintain complete quality control program (QCP) to assure the requirements of the contract as specified, including a documentation system of the inspections, results and actions. Identifies potential and actual problem areas in providing and contracted services. Perform daily quality inspections of contracted areas. Measures and updates quality standards as needed to ensure compliance with contracts Meets with government officials as deemed appropriate by the officials to discuss quality inspections and discrepancies. WORKING CONDITIONS Ability to work flexible hours, including early morning shift (5:30am-9:30am) Work involves the ability to obtain clearance to work on work on federal government contracts Ability to push and lift equipment, office furniture, and accessories weighing up to 50 pounds Work involves the ability to stoop and bend for up to four hours a day. NON-EXEMPT This position is non-exempt and eligible for overtime pay in accordance with the Federal Fair Labor Standards Act. The above is for general informational purposes only and is not intended to be all inclusive or limiting as to specific duties. The Agency reserves the right to modify, interpret, or apply this in any way the Agency desires and in no way implies that these are the only duties, including essential duties, to be performed by the employee occupying the position. The described job requirements are subject to change to reasonably accommodate qualified individuals with a disability. This job description is not an employment contract, implied or otherwise and any employment relationship remains “at-will.” Gesher is proud to be an equal employment opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran or disability status, or any other applicable characteristics protected by law.

What We Do FOX Factory designs, engineers, manufactures and markets performance-defining products and systems for customers worldwide. Our premium brand, performance-defining products and systems are used primarily on bicycles, side-by-side vehicles, on-road vehicles with and without off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, snowmobiles, specialty vehicles and applications, motorcycles, and commercial trucks. Some of our products are specifically designed for and marketed to a variety of leading cycling and powered vehicle original equipment manufacturers ("OEMs"), while others are distributed to consumers through a global dealer and distribution network. Fox Factory Holding Corp. is the holding company of FOX Factory, Inc. and is publicly traded (FOXF) on Nasdaq. Why you should join us Not only do we provide competitive wages, you will also have access to great benefits and employee discounts. But more importantly, it's a fun environment where we truly enjoy working as a team and bringing great products to our customers! If this sounds like something you would love to do, and a place you want to be a part of, get in touch with us by submitting your application. We look forward to hearing from you! Night Shift - Sunday-Thursday, 10:00 pm - 6:00 am Quality Control Inspector/ CMM Programmer Position Summary: Inspects finished products, products being processed, incoming materials, parts and assemblies, etc. for conformance to company standards. Position Responsibilities: * Checks randomly selected samples and verifies accuracy of process. * Uses advanced inspection methods to develop and conduct quality programs. * Works under general supervision. * Keeps records and makes reports indicating results of inspections. * Uses experience and judgment for planning and accomplishing goals. * May obtain samples to conduct studies in laboratory analysis and determines measures to be taken to remedy deviations from standards. * Conduct Product and Process audits and LPA (Layered process audits). Specific Knowledge, Skills or Abilities Required: * Proficient on programming Zeiss CMM * Strong and accurate data entry skills * Intermediate skills in using Microsoft tools (Outlook, Word, Excel) * Excellent organization skills * Use of hang gauges calipers, height gauge, micrometers, etc. * Excellent problem-solving skills. * Self-motivated - able to work with minimal supervision * Testing of raw materials and/or finished products, which may or may not include industry standard test methods (e.g. ANSI/ASME measuring standards) Position Qualifications: Education: HS graduate or equivalent required Experience: 1+ years of experience in CMM programming 1+ years of experience in quality Previous experience with Geometric Dimensioning and Tolerancing (GD&T) Previous experience with Oracle, SAP or other database management systems Work Environment and Physical Requirements: Activity Constantly - 6+ hours : Stand, Walk, Twist/Turn, Stoop/Bend Frequently - 3 to 6 hrs. : Lift to 50 lbs. * Manufacturing Environment * Working in hot and cold climates * Personal Protective Equipment - Ear protection is readily available in high level noise areas * Working around machinery with moving parts * Working around moving objects or vehicles, * Potential for slippery and uneven walking surfaces including use of ladders * Working in close proximity to others * Exposure to offensive odors * Vision abilities required to validate and enter data on computer as well as calibrated measurement tools * Exposures to and working with hazardous waste

Job Description Prestige Stamping LLC Quality Control Inspector Midnight Shift: 11:00 PM to 7:00 AM The Quality Inspector is responsible for ensuring the quality of parts from initial inspection through to final shipment. Key Responsibilities: Perform First Piece Inspection (dimensional and visual layout) Conduct Hourly Inspections to ensure each press is checked regularly Perform Final Hopper Inspections, checking for dirt and foreign parts Carry out Final Job Inspections Verify information on hopper tags at the start and end of each run Assist production teams with problem-solving Report any non-conformances to the Quality Manager or Supervisor File paperwork, including inspection sheets, certifications, and related documents Document inspection results into ERP system and/or inspection check sheets as required. Follow all safety standards and company policies Job Requirements: Must be at least 18 years old. Ability to read basic measuring tools (micrometer, calipers, dial indicator) Input necessary information related to product quality into ERP system. Strong communication skills both written and verbal Ability to work well in a team environment Basic understanding of shop math Physical ability to lift up to 50 lbs and pass a physical exam What we offer: Paid holidays (no waiting period) and vacation pay. Attendance award days. 401k with a generous company match. Comprehensive insurance coverage: Blue Cross Blue Shield Medical/Prescription, Delta Dental, and EyeMed Vision.

Job DescriptionBenefits: 401(k) 401(k) matching Bonus based on performance Company parties Competitive salary Dental insurance Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Requirements and responsibilities: -Minimum 2 years of Quality Control experience required -Very proficient with measuring devices (calipers, micrometers, drop gages, pin gages, go & no-go gages, etc) -Familiar with GD&T drawing symbols and blueprint interpretation -Familiar with Quality Management Systems, including ISO 9001 -Experience with SPC (statistical process controls), data entry, control charting and understanding of trends -Must be highly quality conscious, detail oriented -Strong computer skills, including proficiency with MS Excel, Word and PowerPoint -Follow specific work, process, safety instructions and procedures -Able to complete control charts and process paperwork correctly and efficiently -Able to generate documented reports as required -Able to follow tasked to completion as directed by Quality Manager -Good communication skills and team mentality -Exhibit strong work ethic and attendance record -Forklift experience may be required

DEPARTMENT: AbilityOne- Detroit Arsenal SUPERVISOR: Director, Contracts Gesher Human Services is a bridge to hope and opportunity for people at work, at home, and in the community. Gesher's workforce development, behavioral health, and inclusion programming serves all Metro Detroiters while meeting the needs of the Jewish community. GENERAL Perform daily quality inspections of contracted areas inside the Detroit Arsenal as well as identify potential and actual problem areas in the provided contracted services. Measures and updates quality standards as needed to ensure compliance with current contract. QUALIFICATIONS Required: High school diploma or equivalent. Other: Three to four years of janitorial experience with a documented work history performing custodial services preferred. Demonstrated experience in the performance of quality control Ability to work with individuals with disabilities Interpersonal skills sufficient to establish and maintain productive relationships that emphasize a customer focus as well as communicate effectively with participants, staff, government officials and public. Composition skills sufficient to prepare required reports Basic proficiency in Microsoft Word. Must be able to obit Department of Defense Security Clearance. Must be able to provide immunization records for Mumps, Measles, Rubella (MMR vaccine); Tetanus, Diphtheria, Polio (Tdap Vaccine) Hepatitis B; Varicella (Chicken Pox); and TB Skin test. Valid Michigan Drive License and a driving record must meet safe standards as established by Agency insurance carrier. DUTIES AND RESPONSIBILITIES Develop, implement and maintain complete quality control program (QCP) to assure the requirements of the contract as specified, including a documentation system of the inspections, results and actions. Identifies potential and actual problem areas in providing and contracted services. Perform daily quality inspections of contracted areas. Measures and updates quality standards as needed to ensure compliance with contracts Meets with government officials as deemed appropriate by the officials to discuss quality inspections and discrepancies. WORKING CONDITIONS Ability to work flexible hours, including early morning shift (5:30am-9:30am) Work involves the ability to obtain clearance to work on work on federal government contracts Ability to push and lift equipment, office furniture, and accessories weighing up to 50 pounds Work involves the ability to stoop and bend for up to four hours a day. NON-EXEMPT This position is non-exempt and eligible for overtime pay in accordance with the Federal Fair Labor Standards Act. The above is for general informational purposes only and is not intended to be all inclusive or limiting as to specific duties. The Agency reserves the right to modify, interpret, or apply this in any way the Agency desires and in no way implies that these are the only duties, including essential duties, to be performed by the employee occupying the position. The described job requirements are subject to change to reasonably accommodate qualified individuals with a disability. This job description is not an employment contract, implied or otherwise and any employment relationship remains “at-will.” Gesher is proud to be an equal employment opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran or disability status, or any other applicable characteristics protected by law.

Primary Responsibilities: * Ensure that all product meets or exceeds customer specifications. * Ensure allocation is followed, validate correct product is pulled and shipped to customer. * Assist Quality Control Inspection Supervisor to ensure that all product inspections are being performed, labeling specification are adhered to, and non-conformance product is pulled and corrected. * Flex Between the shipping dock, receiving dock and production to assist Quality Control Inspection Supervisor with Quality issues and/or inspections. * Report any exceptions to the customer specifications to Quality Control Inspection Supervisor. * Send out Quality Issues Emails for Non-Compliant Product. * Oversee floor operations when the Quality Control Inspection Supervisor is unavailable. * Remember recent rejections and rejection trends. * Ensure Product packaging is in presentable condition for our customers. * Ensure Presentation is of highest standards. * Performs any other Quality Control related tasks or special projects as assigned. * Provide training when required. FULL TIME Night Shift - Thursday- Saturday, alternating Wednesdays. 6:00 p.m. - 6:00 a.m. Training will be on our B1 shift Thursday-Saturday alternating Wednesday 6:00 a.m. - 6:00 p.m. Education/Background Requirements: * 1 Year College degree or 6 Months year of experience in a related field required. * Previous experience in produce industry preferred. Specific Knowledge, Skills and Abilities Required * Must pass Background Check and pre-employment Skills Testing. * Must sign a confidentiality agreement upon hire. * Must be a self-starter and willing to work flexible hours. * Proficiency in use of English language with the ability to communicate effectively and professionally. * Proficient in computer-use skills (MS Office: Word, Excel and PowerPoint). * Strong organizational, analytical and problem-solving skills. Need to be creative, adaptable and able to accurately work with a sense of urgency. * Spanish as a second language would be an asset. * Inspection/audit experiences, working in software applications are considered assets. * Proficient in basic computer skills, JDA or NAV experience preferred. * Ability to use and read measuring devices such as scales, calipers, ruler. * Excellent communication and interpersonal skills. Working Conditions: * Environment includes an expansive refrigerated warehouse, where the temperatures range is 45-55 degrees (except office areas). The background noise approaches 70 dcbs. * Must be capable of lifting up to 35 lbs.

VQQ Inc is looking for QC inspector for each shift: days, afternoon and the night shift at its project site/s in MI and/or MO state.. The candidate should be: Responsible to do sorting/ inspection of automotive parts as a third party as per work instructions. Unpack the parts and repack the parts after inspection into its original packaging. Be familiar with automotive inspection/sorting methods and handheld measuring devices e.g., Ruler, tape, vernier caliper. micrometer etc. Rework parts as directed with handheld shop tools /devices/ machines (e.g. cutting, drilling, sanding, trimming, grinding, gluing, etc.); Be able to stand, work on production line, move, work in vehicles shipping yard, bend, lift (part weight varies) Able to read/speak and write in English language and follow all work instructions, visual aids/pictures, procedures, and policies as applicable. Be able to use handheld computer PC devices, tablets, scanners etc.

Available Shift: 1st Shift: 6:00 a.m. - 3:30 p.m. 2nd Shift: 3:30 pm. - 1:00 a.m. There is opportunity for growth; top performers who are interested in developing their skills are eligible for advanced positions at the six-month mark. Eligibility is based on attendance and performance. Job Summary: We are an automotive supplier seeking self-motivated, reliable, hard-working, and detail-oriented entry level quality inspectors for the end of line inspection. Duties and Responsibilities: Perform a full range of varied inspection tasks including visual and touch point inspection Inspect parts with fast pace precision ensuring there are no defects Document inspection results using logs and reports Ability to identify bad product from good Must demonstrate attention to detail as well as excellent listening skills Inspector must be able to utilize basic reading and writing skills Requirements Job Requirements: Strong problem-solving abilities Great attendance record Ability to work and communicate well with others Willing to perform repetitive tasks for extended periods standing up to 10 hours per day The health and safety of our candidates and employees is our top priority. We require that everyone in the building is always wearing a mask and we do a temperature check before candidates enter the building. We also check employee's temperatures every day before each shift.

Primary Responsibilities: • Ensure that all product meets or exceeds customer specifications. • Ensure allocation is followed, validate correct product is pulled and shipped to customer. • Assist Quality Control Inspection Supervisor to ensure that all product inspections are being performed, labeling specification are adhered to, and non-conformance product is pulled and corrected. • Flex Between the shipping dock, receiving dock and production to assist Quality Control Inspection Supervisor with Quality issues and/or inspections. • Report any exceptions to the customer specifications to Quality Control Inspection Supervisor. • Send out Quality Issues Emails for Non-Compliant Product. • Oversee floor operations when the Quality Control Inspection Supervisor is unavailable. • Remember recent rejections and rejection trends. • Ensure Product packaging is in presentable condition for our customers. • Ensure Presentation is of highest standards. • Performs any other Quality Control related tasks or special projects as assigned. • Provide training when required. FULL TIME Night Shift - Thursday- Saturday, alternating Wednesdays. 6:00 p.m. - 6:00 a.m. Training will be on our B1 shift Thursday-Saturday alternating Wednesday 6:00 a.m. - 6:00 p.m. Education/Background Requirements: • 1 Year College degree or 6 Months year of experience in a related field required. • Previous experience in produce industry preferred. Specific Knowledge, Skills and Abilities Required • Must pass Background Check and pre-employment Skills Testing. • Must sign a confidentiality agreement upon hire. • Must be a self-starter and willing to work flexible hours. • Proficiency in use of English language with the ability to communicate effectively and professionally. • Proficient in computer-use skills (MS Office: Word, Excel and PowerPoint). • Strong organizational, analytical and problem-solving skills. Need to be creative, adaptable and able to accurately work with a sense of urgency. • Spanish as a second language would be an asset. • Inspection/audit experiences, working in software applications are considered assets. • Proficient in basic computer skills, JDA or NAV experience preferred. • Ability to use and read measuring devices such as scales, calipers, ruler. • Excellent communication and interpersonal skills. Working Conditions: • Environment includes an expansive refrigerated warehouse, where the temperatures range is 45-55 degrees (except office areas). The background noise approaches 70 dcbs. • Must be capable of lifting up to 35 lbs.

Quality Inspector - Metal Parts (Tier 1 Automotive Stamping) Auburn Hills: 6:00am-4:30pm - $17/hr Job SummaryThe Quality Inspector is responsible for inspecting stamped metal automotive parts to ensure they meet customer specifications and company quality standards. This role supports production by identifying defects, documenting findings, and maintaining a safe and organized work environment. Key Responsibilities Perform visual and dimensional inspections of stamped metal parts Use gauges, calipers, check fixtures, and other measurement tools Follow quality standards, work instructions, and inspection criteria Record inspection results and complete required documentation Communicate defects or nonconformities to production and leadership Support containment, rework, and sorting activities as needed Maintain a clean, safe work area and follow all safety procedures Qualifications Previous manufacturing or quality experience preferred Ability to read and understand basic work instructions Comfortable standing for long periods and lifting up to 25 lbs Long term contract to hire

Job Description Available Shift: 1st Shift: 6:00 a.m. - 3:30 p.m. 2nd Shift: 3:30 pm. - 1:00 a.m. There is opportunity for growth; top performers who are interested in developing their skills are eligible for advanced positions at the six-month mark. Eligibility is based on attendance and performance. Job Summary: We are an automotive supplier seeking self-motivated, reliable, hard-working, and detail-oriented entry level quality inspectors for the end of line inspection. Duties and Responsibilities: Perform a full range of varied inspection tasks including visual and touch point inspection Inspect parts with fast pace precision ensuring there are no defects Document inspection results using logs and reports Ability to identify bad product from good Must demonstrate attention to detail as well as excellent listening skills Inspector must be able to utilize basic reading and writing skills Requirements Job Requirements: Strong problem-solving abilities Great attendance record Ability to work and communicate well with others Willing to perform repetitive tasks for extended periods standing up to 10 hours per day The health and safety of our candidates and employees is our top priority. We require that everyone in the building is always wearing a mask and we do a temperature check before candidates enter the building. We also check employee's temperatures every day before each shift.