Quality inspector jobs in Missouri City, TX - 544 jobs

IRISNDT is currently seeking a NACE CIP Level 1 and Level 2 Inspectors for a full time, call out positions. The Coating Inspectors shall possess knowledge and skills relating to the application of protective coatings to pipelines, fabricated piping, and storage tanks. The inspector should be familiar with and have experience in applying protective coatings, operating lest equipment, monitoring the application of the coatings, and enforcing company, industry and manufacturers specifications. The inspector must be familiar with safety standards applicable to coating applications as set forth in OSHA Construction Industry Standards. Primary Functions: • Performs assigned routine tests on materials, services in process, or finished projects where results are compared with company quality standards. Reports results to supervisor who will make an analysis and take necessary action. • Inspects visually for obvious defects. • Performs detailed visual inspection when necessary to determine quality of prodcut/service where limits are not clearly defined. Identifies defective work and helps put corrective actions in place. • Records results on inspection forms or charts and reports number of defects found. Posts and maintains forms and charts of inspection data, quality levels, or special quality studies. • May act as quality control department clerk, maintaining all quality records for facility. • Verifies that all materials used in the performance of the job assignment are in compliance with Client Company requirements. • Cooperates and works closely with the Repair/Cut-Out Welding Inspector, NDT and Contractor's Representative to assure that no repairs or cutouts are coated and lowered-in. • Assures that all specifications and safety standards are adhered to. • Records and reports material usage and waste. Qualification & Skill Requirements: High School Diploma or equivalent is required Minimum of two (2) years of experience in the application or inspection of coating in the petroleum or chemical industries, or One (1) year experience in the application or inspection of coating and either NACE CIP level 1 certification or SSPC PC1 level 1 certification. Current NACE CIP Level 1 or Level 2 certification required API 510/570 certifications considered an asset Valid TWIC card required Valid Driver's License and pre-access drug and alcohol testing required Pre-employment background checks will be required Please note: API 1169 Certification is required for all Inspectors by January 1, 2019. Physical Requirements: Move, carry, and lift objects 50 lbs. or more. Must be able to walk, stand, bend, reach, and climb. Must be able to work indoors and outdoors in all weather conditions. Benefits: Dental Insurance. Vision Insurance. Health Insurance. Paid Time Off. 401(K) W/Matching. Flexible Spending Account. Health Savings Account. About IRISNDT: IRISNDT is a tech-enabled value-adding service provider of Non-destructive Testing (NDT), Advanced NDT, Inspection, Asset Integrity Engineering, Software, and Specialized Mechanical Services to the chemical and petrochemical, refining, renewables, power, mining and other diverse end markets in the USA, Canada, the United Kingdom, and Australia. Join IRISNDT to build a promising career. Our dynamic environment offers advanced technology and ongoing learning, placing you at the forefront of industry innovation. We prioritize a strong safety culture and invest in our team, promoting a family-friendly workplace and internal career advancement. With IRISNDT, elevate your career where progress and excellence converge. We boast a team of over 2,000 dedicated staff members worldwide, our growth has been driven by seasoned management, robust technical expertise, and an unwavering commitment to exceeding customer expectations. For more information, visit our website at **************** NOTE: To be considered, applicants must be able provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification.

About the job QC inspector QC inspectors must possess computer skills and be bilingual. (Pipe Yard) Responsibilities include inspecting incoming and outgoing materials, conducting cycle counts, and maintaining an updated inventory system. Loading and unloading tasks are also required. Qualification: Must have relevant experience. Package Details

1. Perform in-process and final inspections on fabricated parts, weldments, assemblies, and structural components. 2. Verify dimensions using calipers, micrometers, gauges, tapes, weld gauges, and other precision measuring tools, prepare reports. 3. Review and interpret engineering drawings, welding symbols, fabrication standards, and customer specifications. 4. Review NDE reports, prepare ncr when necessary. 5. Ensure products meet quality standards, customer requirements, and regulatory codes. QUALIFICATIONS: 1. High school education or equivalent. 2. Ability to use appropriate measuring and test equipment. 3. Product familiarity working in a similar environment. TRAINING REQUIRED: 1. Strong attention to detail, accuracy and problem solving skills. Ability to read and interpret engineering drawings and specifications. 2. Performing dimensional inspections. 3. Experience with NDT methods. (VT, MT, PT) 4. Experience working with ITPs, MTRs and fabrication quality documentation PPE AND SAFETY: 1. Follow all shop safety policies, including PPE requirements. 2. Reasonable accommodations are made to enable

Main Purpose: The Instrumentation and Electrical (I&E) Quality Control Inspector is responsible for ensuring all integrated components, assemblies and finished shelter, rack and enclosure packages meet Englobal quality standards, customer specifications and applicable codes and regulations related to instrumentation and electrical systems and functionality. Some fabrication inspection is expected, related to quality of build. This role works closely with I&E production, engineering and project management to identify issues early, maintain documentation and drive continuous improvement across the shop floor. Essential Functions: Own and maintain Englobal Quality Management Systems including continually working with operations to improve production quality while improving schedule Address customer feedback and complaints, acting as a key contact for quality-related inquiries Develop and execute comprehensive test plans for system walk-downs, final inspections and startup sequences Interact routinely with Purchasing, Engineering, Sales and other stakeholders to proactively improve the quality of components and completed assemblies Analyze operational capabilities, develop and maintain quality performance metrics Perform Quality System audits and provide support for areas in need of continuous improvement Partner with the Engineering department to review (and correct) all shop fabrication drawings before they are released to the floor Manage and execute all pre and customer witnessed Factory Acceptance Testing activities Travel occasionally, approximately 5-10% Identify potential conflicts, deviations or non-compliance issues during the fabrication and integration phases and develop corrective action plans Lead internal and external audits to ensure adherence to federal, state and local codes, as well as project-specific specifications Perform other duties assigned by supervisor Benefits Offered: Earned Wage Access Health, Dental and Vision Insurance 401(k) with Company Match Paid Holidays Paid Vacation Life Insurance Disability Insurance Safety Awards Company Store Employee Assistance Program (EAP) Requirements Physical Requirements: Standing, sitting, walking, stooping, kneeling, climbing, feeling, talking, hearing and seeing Turning, twisting, bending, and balancing Pushing, pulling and reaching Must be able to lift and / or move up to 25 pounds and occasionally 50-75 pounds Job Requirements: 5+ years of experience in instrumentation and electrical quality inspection Must have overall work process knowledge to support the development and maintenance of the quality management system Must have problem solving skills to apply methods for Root Cause Analysis (RCA). Understanding of Design Failure Mode Effect Analysis (DFMEA) and Process Failure Mode Effect Analysis (PFMEA) Knowledge of supplier manufacturing processes and required error proofing and other quality systems as needed to provide flawless quality Knowledge of regulatory requirements (National Electrical Code (NEC), National Fire Protection Association (NFPA), Atmosphères Explosibles (ATEX), Internation Electrotechnical Commission System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres (IECEx), International Organization for Standardization (ISO), American Petroleum Institute (API) etc.) Knowledgeable in inspection processes - incoming inspection, material & equipment verification and marking requirements and in-process inspection reporting Must be meticulous about capturing and retaining information Must have basic computer skills (Word, Excel, Record-keeping software etc.) Must be able to work in a team environment and be able to explain issues clearly to team Must be analytical and detail oriented Must be able to pass pre-employment drug screen Must be able to pass a background check Desirable Experience, Education, and Training: Bachelor's degree in a Quality related field Previous supervisory experience Tools, Equipment, and Technology: Office equipment and technology Environmental Conditions: Manufacturing and fabrication shop environment Mix of shop floor and office / documentation work May require walking the yard, climbing stairs and inspecting large assemblies Englobal a Gulf Island Company will not sponsor applications for work visas. Additionally, applicants for employment with Englobal a Gulf Island Company, must be currently authorized to work in the United States on a full-time basis. Accordingly, Englobal a Gulf Island Company, will not consider applications from candidates who require the company to sponsor a work visa and who are not currently authorized to work in the United States on a full-time basis. Englobal a Gulf Island Company is not accepting unsolicited candidates from search firms for posted employment opportunities. Please no phone calls or emails. All resumes submitted by search firms to Englobal a Gulf Island Company, employees via email, the internet, or any other form and/or method without a valid written search agreement in place for the position will be deemed the sole property of Englobal a Gulf Island Company. No recruiting placement fee will be paid in the event Englobal a Gulf Island Company, hires the candidate due to the referral or through other means. #IND25

Job Description Quality Inspector - PCBA MacroFab is the first digital marketplace and intelligent manufacturing platform focused on the $500B market in contract electronics manufacturing. Our technology and services allow customers to rapidly bring new products to market and consume manufacturing as a virtualized resource by offering instant price quotes, rapid services, and production at scale through a network of factories in North America. Our partners gain a source of low overhead manufacturing jobs, allowing them to fully subscribe their factory capacity and eliminate idle time. Come join a rapidly growing team where you can take ownership of your role and build your career at MacroFab. macrofab.com We are seeking a detail-oriented and experienced Quality Inspector to perform in-process and final inspections of Printed Circuit Board Assemblies (PCBA) in a high-mix, fast-paced electronics manufacturing environment. The ideal candidate will have a strong understanding of IPC standards and be skilled in identifying defects, verifying workmanship, and ensuring compliance with customer and industry specifications. Key Responsibilities: Perform visual and mechanical inspections of PCBAs using microscopes, magnifiers, and other inspection tools Verify component placement, soldering, polarity, and labeling according to IPC-A-610 standards Inspect surface mount (SMT) and through-hole solder joints for quality and conformance Document inspection results, discrepancies, and nonconformities using internal quality systems Work closely with production and engineering teams to resolve quality issues and prevent recurrence Perform first article inspections, in-process checks, and final quality audits Ensure all materials and assemblies meet customer specifications and internal quality standards Participate in root cause analysis and corrective/preventive action (CAPA) efforts Maintain a clean and organized inspection area and follow all safety protocols Assist with calibration and care of inspection tools and equipment Qualifications: High school diploma or equivalent required; technical certification in electronics or quality preferred 2+ years of experience inspecting PCBAs in an electronics manufacturing environment Knowledge of IPC-A-610 and other relevant quality standards (certification a plus) Ability to read and interpret engineering drawings, BOMs, and work instructions Excellent attention to detail and ability to work independently Basic computer skills and familiarity with ERP or quality management systems Even if you don't meet all of the requirements listed here, we still encourage you to apply. Skills can be used in many different ways, and your life and professional experience may be relevant beyond what any list of requirements will capture. Note: MacroFab is currently not sponsoring H1-B Visas . Powered by JazzHR cd WkJrgmHN

TMC is seeking a Quality Inspector for a Packaging/Kitting facility in NW Houston to support activities in Production. 1st shift: 6:00 am - 2:30 pm Must be able to work overtime which may include extended hours or weekends Responsibilities: Work closelynwith the inventory team and help to support audits Conducting audits to determine the quality of materials and finished products Perform thorough examinations of all materials and finished products Conduct and report internal audits and evaluations Implement and improve quality control operating procedures Identify and troubleshoot equipment problems and defects Identify areas of improvement to increase efficiency Participate in routine visual inspections Maintain a clean and safe work environment Qualifications Qualifications: Previous work experience in quality control or other related fields Ability to take direction Strong attention to detail Strong analytical and critical thinking skills Excellent written and verbal communication skills Strong math skills and comfortable with counting and verifying supplier lot material. Flexible to work overtime to include 10-12-hour shift and weekends when needed

Job Description We are looking for a Quality Inspector to join our team. The Quality Inspector performs inspections on machined turbomachinery components and assemblies to verify compliance with RMS specifications and quality standards. This role supports the quality management system and continuous improvement initiatives through accurate documentation, evaluation of nonconformances, and corrective action follow-up. The position is responsible for maintaining nonconformance reports and ensuring all discrepant components and assemblies are reviewed and dispositioned in accordance with RMS requirements. SKILLS REQURIED ORGANIZATIONAL - Leadership & Organization: ● Exceptional ability to mulitask, prioritize, and manage time and resources efffectively. ● Excellent time management skills with a proven ability to meet deadlines. ● Exceptional attention to details. ● Display ownership and accountability for tasks and responsibilities. ● Adaptable to changing schedules. INTERPERSONAL - Experience Required: ● Excellent interpersonal and customer service skills. ● Excellent verbal and written communication skills. ● Ability to work within a team. QUALITY, NON-CONFORMANCE ISO 9001 - Experience Preferred: ● Knowledge and experience with QMS principles and ISO 9001 ● Proficient with use of, care of, and the calibration of all types of measuring devices ● Ability to utilize a variety of inspection tools, CMM, Optitcal comparator, Faro Arms ● Ability to perform tirgonometric and geometric calculations ● AWS Certified Welding (CWI) PRIMARY ROLE RESPONSIBILITIES Quality Control Inspector ● Generate and maintain nonconformance reports to ensure that all discrepant components and assemblies are evaluated in accordance with company requirements. ● Perform dimensional/layout inspections of moderately complex parts. ● Perform visual inspection of welded components and repairs, verify compliance with approved procedures, drawings, and internal quality requirements. ● Generate inspection reports and associated documentation. ● Maintain inspection tool calibration system to ensure accuracy of company inspection equipment. ● Perform source inspections at supplier facilities. ● Review supplier-generated reports and material certifications Key Success Factors: Working knowledge of Excel, Word, etc. Knowledge of machining practices and processes Working knowledge of welding processes and weld quality requirements Knowledge of nondestructive testing practices and procedures Skill in communication, both written and verbal Skill in component set-up and evaluation Skill in interpretation of complex drawings Thorough knowledge of dimensional inspection / layout practices and procedures General: ● The above list of activities is not all-inclusive but a general representation of the requirements of the RMS Quality Inspector. This above list is subject to change based on the needs of the company. REQUIRED EXPERIENCE & QUALIFICATIONS ● Minimum of five years in a Quality Inspector role with dimensional inspection and reverse engineering practices. REQUIRED EDUCATION ● High School Diploma or GED from accredited institution ADDITIONAL REQUIREMENTS ● The position may be based in RMS's Pearland, TX facility.. ● Travel time is expected to be 5% ● This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends, may be required based on project needs. ● This position can be required to participate in the company random or customer specific drug and alcohol screening and background check. ● Able to pass a pre=employment drug and alcohol test and background check ● Ability to act professionally under stressful situations. ● Must be able to use hands for assembling and tool usage. ● Must not have allergies or issues related to handling metals, including aluminum, copper, bronze, and steele. ● Able to understand, read, write and speak English. ● Ability to lift 30 pounds ● Authorized to work in the United States ● RMS Inc. may have government contracts that impose specific requirements on employees working on those projects. If an employee does not meet these requirements, they may be reassigned to a different location or be ineligible to work on certain assignments. WHAT WE OFFER: Competitive Pay Paid Time Off Medical / Dental / Vision 401k Employee Incentive Programs Employee Reimbursement Programs Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! Visit ************************* to learn more about who we are and what we do. ABOUT RMS: Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise-all backed by responsiveness in competitive prices and lead times. RMS' commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Powell is a manufacturer of switchgear and other electrical equipment. We are seeking a Quality Inspector for our location in Southeast Houston! Four 10s schedule: Monday-Thursday 6:00am-4:30pm A Quality Inspector is responsible for ensuring that products or services meet established quality standards and specifications. They perform visual, mechanical and electrical inspections, tests, and audits to identify any defects or deviations from quality requirements. Quality Inspectors use various tools and techniques to measure and evaluate the quality of materials, components, and finished products. They document and report any non-conformities and work closely with production teams to address quality issues and implement corrective actions. Additionally, they may participate in the development and improvement of quality control processes and procedures. Essential Responsibilities Learn and be able to perform internal and customer factory acceptance testing to include visual, mechanical and electrical inspections, and testing of all equipment manufactured at Powell facilities according to Powell Standards. Perform tests using equipment such as multimeter, clamp-on-meter, voltage detector, Hi-Pot, etc. Program and operate electronic equipment such as microprocessor-based relays. Energize Powell electrical products and other buyout equipment such as service Panels, HVAC, Battery Chargers, UPS System, etc. Perform equipment failure investigations and root cause analysis. Complete and maintain all test Quality Control documentation as required. Perform maintenance on test equipment as needed. Interaction with all departments (sales, engineering, production control, fabrication, PCR, switchgear, shipping) including customers to work to resolve quality related issues. Interaction with all departments during production, final inspection and final release to shipping is required. External relationships may include regular interaction with other Powell subsidiaries, suppliers and customers. Record Engineering and Shop discrepancies, non-conformities and material shortages utilizing Powell systems. Participates in continuous improvement projects. Promote a safety culture as well as attend all safety meetings. Ensure Powell employees, suppliers and customers adhere to safety rules and PPE requirements. Ensure quality by following standard work instructions and identifying any potential risks to product quality. Ensure that work areas remain clean and well organized. Learn and understand basic electrical principles and relevant Mechanical experience. Minimum Qualifications High School Diploma or General Education Diploma, or a Trade School diploma or certificate Minimum 1-3 years' experience in manufacturing environment. Ability to read engineering documentation and drawings including specification sheets, wiring diagrams, schematics, three-line drawings, wiring lists and part drawings. Preferred Qualifications Experience in Quality inspection for electrical or electronic equipment or components preferred Basic experience working with industry codes and standards and able to refer to applicable codes. Skills, Abilities & Other Requirements Ability to apply industry standards as applicable to job and product. Able to read and interpret electrical symbols, characters, and drawings. Able to apply product knowledge and technical skills to aid in problem solving. Basic computer skills using Oracle, Word, Excel and Access. Develop the ability to answer technical questions from shop, inspectors, and customers. Ability to interact on a regular basis with shop, inspection, engineering, sales and shipping personnel. Actively seeks out self-development through internal or external programs that contributes to knowledge, skill and abilities. Demonstrates integrity and ethical decision making. Conscientious, thorough, accurate, and reliable when performing and completing job tasks. Able to work effectively within a team and around other departments and their activities. Ability to learn and adhere to all manufacturing policies and practices to ensure adherence to ISO requirements. Must be proficient in the English language, both written and verbal. Working & Environmental Conditions Working Conditions Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities. Required to always wear personnel protective equipment (i.e., hard hats, safety glasses, hearing protection, safety harnesses and respirators) when required. Working at a desk and computer in an office environment is required. Must be able to work from all types of ladders (step ladders, "A" frame ladders and all size extension ladders) and scaffolding. Working at heights usually no higher than 30 feet in the air or using proper lift equipment. Physical Requirements Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs. Bending the body at the waist, the legs at the knees, and extending arms and hands in any direction in a repetitive manner continuously. Continuous standing, walking 50-300-foot distances for long periods of time with only occasional sitting. Must be able to climb stairs frequently throughout the shift. Able to frequently look over shoulders, work with both arms above shoulders and use both arms at full length frequently. Using upper extremities to apply or exert a force continuously up to 50lbs. Ability to use hand tools such as tin snips, hammer, and power tools (some vibrating), for long periods of time with frequent repetition. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. *Posted position does not provide visa sponsorship or relocation. #LI-KC1

Remarkable people, trusted by clients to design and advance the world. Wood Pipeline Inspection Team has an opportunity for a Chief Inspector (Sr. Quality Inspector). In this role you will be assigned to major project reporting to the Construction Manager & Project Manager/Director leading a team. Direct the efforts of the inspection team to assure the construction activities are in accordance with all project drawings, specifications and procedures. Responsibilities Assure all activities are conducted to maintain the safety of all personnel. Ensure that all government regulatory and environmental permitting is in place before construction commences. Assure that all of constructor's equipment and staff are qualified to meet safety requirements of the project. Coordinate communication between the project management team, client staff and constructor staff to assure an effective project execution. Monitor and direct all inspection activities; report any discrepancies in meeting the requirements of the project specifications and procedures. Direct and coordinate survey crews to meet the needs of the construction activities. Review and record inspection reports; direct all corrective action required. Monitor all weld testing and x-ray reporting to assure 100% coverage of weld quality. Qualifications Ability to monitor and direct all inspection activities; report any discrepancies in meeting the requirements of the project specifications and procedures Demonstrate the abiltty to direct and coordinate survey crews to meet the needs of the construction activities Able to review and record inspection reports; direct all corrective action required Ability to monitor all weld testing and z-ray reporting to assure 100% coverage of weld quality Demonstrate the ability to be well informed with project drawings and applicable specifications and procedures and to discuss this information with craft inspectors Five years of experience in pipeline and station construction projects Familiarity wi th CFR Trtle 49 and Parts 191 & 192 High school diploma or equivalent Good oral and written communication skills

Full-time Description We are ERock! Enchanted Rock is a leader and innovator of Electrical Resiliency-As-A-Service. Our advanced dual-purpose microgrids protect companies, critical infrastructure, and communities from unexpected power outages, ensuring business continuity and civic durability. Enchanted Rock's dual-purpose microgrids use natural gas and renewable natural gas (RNG) to drive the nation's most dependable microgrids - all while producing significantly lower to zero carbon emissions than traditional diesel backup generators. Powered by Granite Ecosystem™, our revolutionary software system, Enchanted Rock solutions provide 24/7/365 monitoring, optimization, and forecasts to enable worry-free, reliable power for businesses. The Enchanted Rock solution brings together patented technologies, advanced dual-purpose microgrid designs and integrated end-to-end services. The Power is On and we keep it on. What you'll do… The Quality Inspector will be a member of the Quality Team, reporting to the Quality Manager in Manufacturing. This position will be responsible for ensuring that incoming material, parts, components, and final product meet all designated quality specifications. The Quality Inspector will also coordinate product acceptance, reporting of inspection results and production/test data, while working with the Manager Manufacturing and the Quality Manager to drive production quality and continuous improvement. You'll make an impact by: Inspecting and approving incoming materials, parts, and components by confirming specifications, conducting visual and measurement tests, and rejecting and returning unacceptable materials. Inspecting in-process production by confirming specifications, conducting visual and measurement tests, communicating required adjustments to production supervisor. Approving finished products by confirming specifications, conducting visual and measurement tests, returning products for re-work, and confirming re-work. Documenting inspection results by completing reports and logs, summarizing re-work and waste, and inputting data into quality database. Keeping measurement and testing equipment operating by following operating instructions and calibration requirements and calling for repairs. Maintaining a safe and healthy work environment by following standards and procedures and complying with legal regulations. Providing user feedback to the development teams on product quality and defects. Requirements You'll sweep us off our feet if you: Are flexible and quick study. Are detail and process oriented. Have experience with quality control skills (e.g., Six Sigma). Have experience working in a Quality Management System driven environment. Enjoy working and driving improvement in a team environment. What you'll need: High School diploma. Basic computer skills and math skills. Minimum two years of experience with quality control in manufacturing/assembly. Ability to read and understand engineering drawings, specifications, and blueprints. Ability to operate with calipers, micrometers, rulers, gauges, and other measuring instruments. Experience in inspection, testing and measuring products against specifications, while producing required documentation. Ability to analyze testing data and make calculations to get required results. Interpersonal skills, initiative, and commitment to work in a team. Physical requirements and working conditions: Must possess mobility to work in a manufacturing environment. Standing: Frequent while performing inspection activities in the receiving and manufacturing areas. Walking: Frequent - Moving on foot while working in the receiving and manufacturing areas. Level Reaching: Occasional - as needed, during inspection activities. Machines & Equipment Testing equipment positioned in designated test cells. Your Rewards! Medical, Dental, Vision, and Prescription Drug Insurance Company-Paid Life Insurance Flexible Spending Account (FSA) Health Savings Account (HSA) Wellness Programs and Incentives 401(k) Retirement Plan & Company Match Paid Time Off - Sick & Vacation Time Paid Holidays Cool Open-Office Concept Do you have what it takes to join the Enchanted Rock team? Send us your resume today. Be yourself and keep it useful, funny, and cool! The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Enchanted Rock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At Enchanted Rock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education - to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values specifically our value of “The Team” which includes “Mutual Respect, Openness, and Honesty.”

The Quality Control Inspector 1 supports the organization in the development, maintenance and execution of a quality control program that will allow the business to continually improve. In addition, the Quality Control Inspector 1 will help ensure that the supply being delivered from vendors and the product being shipped to customers meets the expected standards and specifications. Duties and Responsibilities: Inspect raw materials, machined, welded, and coated parts ordered and received at TEI (TRENDSETTER ENGINEERING, INC) headquarters from vendors and internal machine shop for quality and accuracy. Verify parts received against engineering drawings, specifications, and manufacturing records. Prepare electronic inspection reports for incoming products. Maintain incoming inspection log. Issue, document, and follow up on NCR's. Manage calibrated measuring equipment and certificate log. As necessary, perform other duties, requiring the same level of skill & responsibility. Support any new quality initiatives as required. Be familiar with company HSE (Health, Safety, and Environmental) policies and procedures. Share knowledge & best practice across the company. All other duties as assigned. Qualifications: Associate degree or at least 5 years of previous experience related to quality control inspection, preferably within the oil & gas industry. Advanced skills in dimensional measurement and verification, utilizing all necessary tools. Proficient computer skills and knowledge of Share point and Microsoft 365 required. Ability to demonstrate initiative and assertiveness, plan and organize work in an efficient manner, and work well under stress and time pressures. Strong interpersonal and communications skills, both verbal and written

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

At Sabre Industries, we connect and power America's communities with world-class utility and telecom solutions. We reliably build a better world together; one customer, one team, and one community at a time. Our teams live out the organization's core values of integrity, commitment, innovation, and connection. That's how we continuously exceed our high standards of enterprise excellence-by creating a space for our engaged employees to thrive. With consistent hiring opportunities nationwide and countless career levels, chances are the next big step on your career path starts here. We work with our employees to create customized career paths and development in all facets of the organization. People will always be our greatest asset, and we place emphasis on enhancing the lives of our employees. Scope of Responsibility: The purpose of this position is to oversee the quality of all galvanized products prior to sending to customers to ensure we are meeting or exceeding customer expectations and to conduct final inspections on customer product to ensure all products are free of uncoated areas, acid spots, lumps, projections, globules, edge tears, spikes or heavy deposits of zinc which will interfere with intended use of the product. Under the direction of the Manager or Shift Supervisor, the QC Specialist provides training, guidance and direction to employees in an efficient, clean, safe and cost-effective manner in order to achieve the goals and key performance metrics in line with the organization's objectives. Essential Duties: * Ensure all galvanized products meet Sabre quality requirements, minimize downtime, and promote efficiency and uptime. * Perform final inspection to ensure all products are free of uncoated areas, acid spots, lumps, projections, globules, edge tears, spikes or heavy deposits of zinc which will interfere with intended use of the product. * Measure the thickness of final product and document according to the quality program guidelines. * Conduct all inspections in accordance with Sabre Galvanizing Work Instructions, SOP's, and associated ASTM specifications with regard to specific customer requirements that may go above and beyond the standard. * Read work orders or receive oral instructions to determine work assignments or material or equipment needs. * Must use good judgment, follow instructions and have good problem-solving abilities. * Relies on instructions and pre-established guidelines to perform the functions of the job. * Excellent attention to detail and strong ability to multi-task. * Train and assess employees' competencies in the Skill-Based Pay process. * Actively seeks and supports continuous improvement activities in process efficiencies, costs and effectiveness of work. * Must have knowledge and demonstrate compliance of all safety guidelines. * Calibrate the mil gauge using calibration blocks and log results. * Record number of units handled or moved, using daily production sheets or work tickets. * Attach identifying tags to product or mark them with proper identifying information as per Work Instruction requirements. * Follow established housekeeping standards. * Additional duties as assigned by Supervisor and/or Management. * Work in your shift as scheduled * Getting along with coworkers * Additional duties as assigned by Supervisor and/or Management. Position Requirements: Education: High School Diploma or GED Equivalent preferred. Experience: Prior Galvanizing and Manufacturing experience required. Experience using forklifts and cranes required. Skills & Abilities: * Knowledge of ASTM Standards required. * Ability to read, write and speak English required. * Must be able to obtain SG Crane/Forklift Certification. * Experience using mil gauge, tape measure, hand file and wire brush highly preferred. Physical Requirements: * Must be able to lift up to 75 pounds. * Must be able to perform physical activities that require considerable use of arms and legs and moving entire body, such as climbing, lifting, balancing, walking, stooping, bending, twisting and handling of materials. * Must be able to work in an outside manufacturing environment for long shifts, including weekends. * Position requires manual dexterity, arm-hand steadiness and a safety-minded individual. * Must be able to work in an open environment exposed to extreme temperatures. * Must have the ability to concentrate on tasks for long periods of time and be able to observe and receive information from all relevant sources At Sabre Industries, we invest in your future with a competitive benefits program. As a full-time employee, you are eligible for: * Medical, Dental & Vision coverage * 401(k) with Company Match * Continuing Education & Tuition Reimbursement * Life and Disability Coverage * Paid Time Off & Paid Holidays * Health and Wellness Resources * Employee Discounts Sabre Industries is an Equal Opportunity Employer: M/F/Vets/Disabled/Sexual Orientation/Gender Identity Revised: 10/24/2024

SHIFT: Day /OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials for defects. The QC inspector will also be responsible for documenting inspection results, taking measurements, and tracking defects. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Reports to QC Lead person for daily activities Perform and document dimensional and visual checks of production parts and incoming goods. Responsible for notifying Quality Control Lead person, in addition to Manufacturing and Engineering, of non-conforming goods. Inspect customer-supplied inserts, per drawings supplied. Ring check and approve production tryouts to engineered tolerances. Inspection of buy-out materials. Make first-piece inspection and document ring checks. Shipping certifications. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminate waste. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Lead person Other Requirements An annual vision examination is required. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 4-5 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Inspects finished products, products being processed, incoming materials, parts, and assemblies, etc., for conformance to company standards. **Essential Duties and Responsibilities** + Conduct QC inspections and audits on contract requirements, and other services performed. + Prepares reports, develops quality plans, attends meetings as directed; performs other duties as assigned. + Checks randomly selected samples, and verifies accuracy of equipment or process. + Maintains a safe and healthy work environment by following standards and procedures, complying with legal regulations. Accomplishes quality and organization mission by completing related results as needed. + Schedule inspection activities. **Knowledge, Experience and Skill Requirements** + Knowledge of OSHA standards, NFPA, Joint Commissioning and safety procedures with skills in conducting accident investigations and safety inspections. + Basic knowledge of mechanical systems, critical thinking skills, and proficiency with standard testing tools. + ISO Lead Auditor Certification with a thorough understanding of ISO 9001:2015 standards + Knowledge of recognized and generally accepted good engineering practice regulations and codes. + Excellent analytical and computer skills, specifically in MS Office Suite. + Strong written and oral communication and presentation skills. + Strong teamwork and interpersonal skills **Work Experience** + Up to 2 years of experience of Quality control or an equivalent combination of education and experience sufficient to understand technical and process-based aspects of the services we provide. **Education, Licenses and Certification Required:** + High School Diploma + OSHA Certification _This job description is subject to change by the employer as the needs of the employer and requirements of the job change._ J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $40,000 to $60,000. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes: U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. **We maintain a drug-free workplace and perform pre-employment substance abuse testing.** Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Ameritex Machine and Fabrication is a high mix low volume sheet metal and structural fabrication facility that uses a variety of equipment such as CNC Fiber Lasers, CNC punch presses, CNC press brakes, and tube lasers to support over 19 production and assembly lines. The company serves customers in energy, oil and gas, automotive, electric vehicle, and aerospace. We operate out of a state of the art 100,000 sqft facility in Conroe, Texas. Job Responsibilities \tAddresses daily quality concerns and questions \tTroubleshoots manufacturing problems and quality issues \tWork closely with operation teams to ensure process controls are in place and adequate to meet standard requirements \tEnsure any non-conforming product is properly identified, quarantined and communicated \tExamines material or product for surface defects such as crack, pits, and incomplete welds \tVerifies specified dimensions of product or material \tConduct incoming material inspection, in-process inspection, and final inspection to procedures, specifications, drawings, samples, or illustrations. \tMust be able to follow instructions and work independently \tCleaning, organizing, and setting up workstations \tKitting or grouping required parts per job requirements \tMust be able to easily multitask around the shop. Qualifications \tExperience in manufacturing quality environment \tTooling experience needed \tComputer capable \tAble to stand, walk, squat, move for 8+ each day At least 2 years of college education Work Schedule Though this professional needs to complete his/her work during the standard routine hours, he/she might need to be flexible at times and extend beyond the normal hours to do the work which needs to be completed on a priority basis. $18.00 - $28.00 Hourly

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. Assists in other branch duties as assigned related to back office support and housekeeping. Performs other duties as assigned. Qualifications Education and Experience High School or equivalent (Required) 6 months to 2 years of transferrable industry experience (Prefered) Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications Valid Driver's License (Required) Transportation Worker Identification Credential (TWIC) (Preferred) Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities Continues to gain knowledge and expertise in the profession (Required) Uses existing procedures to solve routine or standard problems (Required) Has no discretion to vary from established procedures by performing structured work assignments (Required) Language Skills: English - Basic level (Required) Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) Reasoning Skills/Abilities: Intermediate level (Required) Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) Ability to work independently with minimal or no supervision (Required) Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job Stand: Frequently Move or traverse: Frequently Sit: Occasionally Use hands: Constantly Reach with hands and arms: Frequently Climb or balance: Frequently Stoop, kneel, crouch or crawl: Frequently Talk/hear: Constantly Taste/Smell: Occasionally Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Quality Control Inspector II (Current Aerospace Industry Exp. Req.) Employment Type Full-Time Benefits Offered Dental, Life, Medical, Paid Time Off, Retirement, Vision Compensation $20 to $23 per hour to be determined at the time of the interview with our customer. This is a Permanent position. Our customer is a leading and growing company in the aerospace market that has grown every year since our inception over 20 years ago. Key Responsibilities and Accountabilities: · Examine materials and final products, calculates tolerances and dimensions using hand tools, verifies conformance to standards, reads work orders, routers and blueprints to determine product specifications as a part of inspecting products and materials in process and in final inspection · Document / record quality inspection information · Evaluate information to determine whether parts and materials conform to regulations and standards · Maintain current knowledge of organizational policies and procedures, federal and state policies and directives · Analyze data or information · Establish and maintain interpersonal relationships · Evaluate information to determine compliance with standards Professional Skills: · HS diploma or equivalent or equivalent combination of experience/education · 4 or more years of related experience required · Intermediate knowledge of mathematics and applications · Basic AS9100 knowledge · Intermediate knowledge of machines and tools, including their designs, uses, repair, and maintenance. This includes Keyence inspection equipment, optical comparators, digital micrometers and calipers, gage pins, ring gages, dial indicators, concentricity gage, thread segments Intermediate knowledge of design techniques, tools, and principals involved in production of precision technical plans, blueprints (including geometric dimension and tolerancing features), drawings, and models as well as advanced knowledge of geometric dimension tolerancing (GD&T) features Physical Requirements and Working Condition: · Must be able to bend, stoop, kneel, and stand for prolonged periods of time, climb steps, and ladders · Must be able to work at heights utilizing fall protection equipment (man lifts, ladders, and stand) · Must be able to lift up to 45lbs · Subject to environmental conditions -protection from weather conditions but not necessarily from temperature changes · Subject to hazards to include a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat or exposure to chemicals · Subject to loud constant noise Subject to atmospheric conditions such as fumes, odors, dust, mists, gases, or poor ventilation Employee Acknowledgement: The above information on this description has been designed to indicate the general nature and level of work performed at this client's location. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. Due to nature of defense contracts, US Citizenship is a requirement. As part of our Drug and Alcohol Policy, upon acceptance of any offer of employment, employment will be conditional of successfully passing a background check and required drug testing. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities Shipyard experience is required. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 Walk-ins Accepted! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM

To be a part of Axial means you'll be joining a company that is positioned to lead the way in the most demanding fastener requirements and environments. Industries we serve include energy, oil and gas upstream and downstream, defense, and heavy industry. We have culture of growth and innovation where we value your growth and development as we collaborate to improve as an American manufacturer. We draw on our extensive experience in multiple industries and markets to solve complicated manufacturing problems for our nationwide and global customers. Axial prizes a team attitude, continual growth as humans and employees, personal ownership and pride of work. Our benefits lead the way and include strenuous safety protocols to put the health and safety of our team first, and a competitive benefits package that includes PTO day 1 of employment, (all insurance), 401k, and shift differential payment. Do you want to join a place that you can make a difference and grow your career? APPLY TODAY! Seeking 2 second shift employees (one experienced, one entry to intermediate) level, 1 first shift position only. Must indicate what shift you are willing to work. Essential Job Functions: Willingness and ability to plan and meet performance and production expectations. Perform receiving, First Article, In-Process and Final Dimensional inspections. Operate various inspection machines and instruments. Ability to read and understand print tolerances. Knowledge, Skills, and Abilities: Should have experience with hardness testing machines and inspection tools. Ability to interpret mechanical drawings. Be able to interpret specification ASTM, ASME, etc. and customer specifications. A willingness and ability to plan and meet performance expectations in a multi-tasking and team-oriented environment. Reliable, dependable, and dedicated to meeting quality and integrity standards. Driven to solve problems and help others. Good math skills and ability to apply logic and reasoning. Good time management skills. Education and Experience: High school diploma or equivalent. 1-2 years prior Inspection or machine operator experience required for entry level operator. 3-5 year prior Inspection or machine operator experience required for middle level operator. 6+ years prior Inspection or machine operator experience required for senior level operator. Physical Requirements: Must be able to work in noisy environments. Must be able to work in environments exposed to seasonal weather conditions. Must be able to lift up to 50 pounds at times. Must be able to bend, stretch, squat, and reach to access all parts of the machine. Pay Range: $16-$24 per hour (based on experience) Differential pay available depending on time and days worked. Employment is contingent upon a successful background check and drug screen. Equal Opportunity Employer; E-Verify Employer