Quality inspector jobs in Montgomery, AL - 43 jobs

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for quality and integrity. Our 98,000 employees operate a network of 2,650 offices and laboratories, working together to enable a better, safer and more interconnected world. SGS is currently looking for Welding Inspectors in multiple locations throughout the USA. Work will be assigned on a as needed basis and will be paid for the hours/days and other applicable cost items for the hours/days spent on the assigned work. The work duration could be a day or several days or several weeks. The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Scope of work: The scope of work includes: Ensuring that welds and welding processes comply with codes, standards, specifications, and project requirements by performing visual inspections and also to witness & verify non-destructive tests & their reports. Monitoring welding parameters and inspecting materials and equipment. Quality document reviews including WPS / PQR, assessment of quality, and issue reports or recommendations for corrective actions to ensure the safety and structural integrity of welded components. Verify that welders are qualified, and that welding procedures and specifications (WPS) are followed correctly. Ensure all welding activities adhere to relevant industry codes (like ASME, AWS, API) and contractual requirements. Perform pre-weld, in-process, and post-weld inspections to identify defects and ensure quality. Conduct visual inspections of welded joints, checking dimensions, penetration, and bead formation. Witness non-destructive testing (NDT) and interpret / verify results. Visual inspection on the quality of welding and mechanical projects. Ensure that materials, equipment, and safety regulations are followed. Prepare detailed reports documenting inspection results, including any issues found. Qualifications Must have at least one of the following: AWS / CWI / CSWIP/API Minimum of five (5) years industrial welding-related inspection experience. Two (2) of these years should be in Quality Assurance / vendor surveillance / shop inspections inspector. Minimum of 5 - 10 years of industry experience (mainly Oil and Gas) Must be able to demonstrate knowledge of welding inspections. Welding inspections experience at manufacturer shops / facilities. Welding inspection experience of Pipeline, Equipment i.e. Pressure vessels, Heat exchangers, Pumps, etc.. would be an asset. Work schedule is Monday to Friday - 8 to 10 hours/day Hourly rate - $40 to $45/hr + $0.70/km No set schedule, the inspector will be contacted as needed. If the inspection site is beyond a round trip of 200 miles from the inspector place of residence, a per diem may be considered. The inspector will be required to sign an independent contractor agreement/sub-contractor agreement (1099) with SGS North America Inc. Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Division: Southern Pine Work Schedule: Monday - Thursday; 5pm - 5am; Weekends and Overtime as Needed Why you will love Coca-Cola UNITED? About us: * Privately owned and operated with 100+ years of historical strength and stability * Dedicated to supporting internal career growth through on job training, learning and opportunity for career advancement * Excellent Total Value Benefits Package to include: * Two weeks paid vacation within first year * Comprehensive Medical Preferred Provider Plan * Dental, vision, flex spending * Employee Assistance Program * Company paid life insurance ($50,000) * Additional optional insurance (accident, critical illness, universal life, home & auto) * Paid maternity & paternity leave * Paid holiday & sick time * 401(k) match (50% on first 6%; plus an additional annual match of up to 3%) * Exclusive employee discounts (cell phone, event tickets, gym membership, car buying, hotels, car rentals, technology needs and much more) * Competitive Compensation * Fast paced environment promotes a healthy lifestyle * For qualified candidates we offer an amazing CDL Tuition Program reimbursable up to $5250 for CDL school tuition - ask your Recruiter for details Job Description The Technician - Quality Assurance will be responsible for testing our finished product as well as specific packaging attributes as described by our Parent Company to ensure that our finished products meet required specifications. What your day will look like: * Perform beverage attribute testing to include: Brix, Assay, CO2, Net Contents, pH and Taste & Odor * Perform package attribute testing to include: Closure Removal Torques, Can Lid Application (Where Applicable), and Visual Appearance * Perform finished product attributes such as: Correct Bottle/Can, Correct Closure/Lid, Correct Label, Correct Production Date Code to include final packaging (Cases, Cartons, Trays, Wraps, etc.) and verification of any Promotional Identification * Perform Micro sample collection and testing (Note: A designated technician may be selected for Micro testing, in some cases, removing this responsibility from the remaining technicians) * Perform Syrup testing such as Brix, Assay, pH to include the use of an ultra-performance liquid chromatography (UPLC) or a high-performance liquid chromatography (HPLC) unit. (Note: Blending Technicians may be selected for Syrup testing, in some cases, removing this responsibility from Lab Technicians) * Perform lab equipment calibrations and/or verifications as needed. Lab equipment maintenance and problem troubleshoot is required as needed * Perform water treatment duties as described by the Quality Manager where applicable * Perform Internal Clean in Place (CIP) setup as described by the Quality Manager where applicable * Participate in the Sensory Program where applicable * Data entry from product testing is required in Laboratory Data Management System (LDMS) to include review of test results and reaction should an out of specification situation arise. Knowledge of the Product Hold program (when to use and when not to use) is a must. Assist in writing standard operating procedures (SOP's) as needed to include the use of Master Control * Perform daily lab housekeeping to include good manufacturing practices (GMP) inside and outside the lab where needed * Maintain lab testing equipment supplies to include ordering and inventory control * Responsible for receiving and testing ingredients where applicable * Performs appropriate duties as assigned by management What you need to succeed: * Minimum age 18 years old * Personal Protective Equipment (PPE) as required by position and compliance with UNITED safety policies * Regular and prompt attendance is an essential function of the job * Ability to read, write and speak English * Ability to maintain a neat professional appearance within Company guidelines * Ability to maintain safety and security of Company assets * Ability to utilize all Company provided resources and technology * High school diploma or general education degree (GED); or 6+ months related experience and/or training; or equivalent combination of education and experience * Willingness to work weekends, holidays, or flexible schedule as required * In depth knowledge of Laboratory Data Management System (LDMS) preferred * Effective math skills * Effective attention to detail, analytical, multi-tasking, and problem-solving skills * Effective interpersonal, oral, and written communication skills * Ability to work with all functional team members * Ability to be self-motivated and show initiative * Effective time management and organizational skills needed Physical Requirements Position will be required to comply with the CCBCU Personal Protective Equipment Program. Position is required to wear safety toed shoes when performing the following tasks: Operating Powered Industrial Equipment or Working in an Area where Powered Industrial Equipment is in use, Fleet Maintenance, Working with Palletized Product, Use of Hand Trucks/Dollies to Deliver Product, Cooler Services, etc. (X) None = 0% (0 hrs) (L) Limited = 1% (1 hr) (O) Occasionally = 2%-25% (1-2 hrs) (F) Frequently = 26%-50% (3-4 hrs) (R) Repeatedly = 51%-75% (5-6 hrs) (C) Continuously = 76%-100% (7+ hrs) Requirement Frequency Sit O Stand F Walk F Bend O Kneel/Squat O Climb Stairs O Crawling O Overhead Reach O Typing F Vehicle Operation X PPE/Special Clothing F Grasp O Push/Pull O Fine Manipulation F Lift up to 50 lbs L Carry up to 50 lbs L Pushing up to 50 lbs L Pulling up to 50 lbs L Exposure to Water F Exposure to Chemicals F Exposure to Weather O Exposure to Noise F CCBCU is an Equal Opportunity Employer Minorities/Women/Veterans/Disabled. Veteran friendly. Nearest Major Market: Montgomery

Job Description Now Hiring: QA/QC Technician - Data Center Project (Montgomery, AL) Pay: TBD, based on experience Per Diem: TBD for qualified travelers Schedule: Full-time | Long-term project United Trades of America is currently hiring a QA/QC Technician for a high-profile data center construction project in Montgomery, Alabama. This is a critical role focused on ensuring quality, safety, and compliance across all phases of construction. If you are detail-oriented and experienced in quality assurance/control for industrial or commercial builds, we want to hear from you. Key Responsibilities: Perform inspections and testing of mechanical, electrical, or structural systems according to project specifications Monitor installation practices and ensure adherence to quality standards and safety protocols Maintain accurate and up-to-date QA/QC documentation, reports, and logs Collaborate with site supervisors, engineers, and subcontractors to identify and resolve deficiencies Ensure compliance with drawings, specs, ITPs, and applicable codes Document and report non-conformance issues and confirm resolution through corrective actions Qualifications: Minimum 3 years of QA/QC experience in commercial or industrial construction Experience with data centers or mission-critical projects is highly preferred Strong working knowledge of ITPs, submittals, RFIs, and construction documents Familiarity with construction codes, specifications, and jobsite safety requirements Proficient in Microsoft Office and QA/QC tracking tools Excellent communication and documentation skills OSHA 10 or 30 certification preferred Additional Requirements: Must provide own PPE and tools Must be able to pass a background check and drug screening How to Apply:

Job Title: Construction Inspector- Welding/Structural Bolting ***Work Location: Birmingham, AL*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities Observe, inspect and provide reports on construction projects at federal facilities for compliance with plans and specifications in regard to workmanship, materials, installation and construction methods. Perform construction welding inspections relating to steel fabrication . Perform coating inspections and testing of various coating systems and methods of application. Perform structural bolting inspections and testing of various bolting methods and installation. Provide recommendations or necessary changes to government personnel regarding contract plans and specification relative to all phases of construction. Monitor contractor's quality system and administer the three-phase inspection process. Provide surveillance at construction sites and assists owner in problem resolution. Deliver and review change orders; modification; RFIs; and submittals. Monitor contractor's schedule. Review and ensure QA and safety plans are adhered to by the contractor. Utilize Resident Management System (RMS). Education/Experience: High School graduate with 5 years of experience with construction welding inspections and 2 years of experience in coating inspections and structural bolting inspections. AWS Certified Welding Inspector in conformance with AWS QC1 and shall have a minimum of five (5) years of experience relating to steel fabrication. Nondestructive testing (NDT) personnel shall be qualified to ASNT. Coating inspection and must have NACE Level I or higher or SSPC Protective Coatings Inspector Level 1 or higher and shall have received formal training in coating inspections and testing of various coating systems and methods of application. The individual shall have a minimum of two (2) years of experience in inspection and testing of coating systems. Structural Bolting Inspection experience and must be certified in accordance with AASHTO G4.2 guidelines and have received formal training in structural bolting inspections and testing of various bolting methods and installation. The individual shall have a minimum of two (2) years of experience in inspection and testing of structural bolting installations. Experience with Three-Phase QC/Inspection process Experience preferred EM 385-1-1 USACE Safety Manual Experience preferred with Resident Management System (RMS) Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

About Us: Carl Buddig and Company, a respected name in the meat manufacturing industry, boasts a legacy of over 80 years. Founded as a family-owned company, we have evolved into a leading producer of premium meat products, including renowned lunchmeats, ready-to-eat cooked meats under our Kingsford, LLC division, and savory snack meats from Old Wisconsin. As a third-generation family business, our success is anchored in our commitment to quality, innovation, and community. With a workforce of 2,500 dedicated team members spread across Illinois, Wisconsin, and Indiana, we continue to expand, driven by a vision for excellence and a responsiveness to evolving consumer preferences. At Carl Buddig and Company, we foster a culture centered around teamwork and innovation. We strive to create an environment that values creativity and collaboration, ensuring every team member is empowered to contribute to our collective goals. Our dedication extends beyond our business operations. We actively support charitable initiatives and community organizations through direct contributions, volunteer work, and partnerships. We aim to make a positive impact and give back to the communities that have supported us over the years. Join us at Carl Buddig and Company, where tradition meets innovation, and where our passion for quality meat products is matched by our commitment to our people and communities. Position Summary: To effectively perform all the required duties of the Quality Assurance Technician in an accurate, thorough and safe manner. Perform audits that consist of pre-operational/operational in oun facility. Processing areas as prescribed by A policy and procedures, and maintain proper documentation, in order to assure adherence to specifications. Key Responsibilities: Perform audits (pre-operational / operational) in the facility ensuring that all @uality/HACCP/SQF/SSOP requirements are being met complete all required paperwork, documenting all findings and corrective actions implemented Inspect and verify Critical Control Points (CCP'S) in the manufacturing tacity. Monitor GMP's in production areas. Collect samples for lab analyses to assure that product meets specifications. Perform routine data entry in computer, with minimum errors. In the event a deficiency is discovered/product failure, he/she will report the events) to the QA Manager and appropriate department supervisor/manager Maintain work area in a clean and sanitary manner. Possess knoweage of and familiarity with the job responsiblities and requirements of all direct reports to include Line Packers. Team Leaders and Packaging Material Handlers. Perform inspections of Hold items for proper disposition. Provide assistance to Operations in times of staffing challenges, possibly working on the production line. Provide guidance to line associates for best quality. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) Use of Artificial Intelligence in Employment Decisions Statement Carl Buddig and Company does not use artificial intelligence (AI) to make any employment decisions, including recruiting, hiring, promotion, performance evaluations, discipline, or termination. All employment decisions are made by trained HR professionals and company leaders to ensure fairness, consistency, and compliance with the Illinois Human Rights Act.

Information Job Title: Department/Location: Quality Technician - Collagen Quality/Montgomery Reports To Title: Work Schedule: Quality Manager Weekdays 40 hours per week + flexibility for additional work if required Job Purpose To follow up day to day quality in the Montgomery facility, ensure correct measurement and disqualification criteria, make sure the product meets quality expectation and initiate quality improvement Duties and Responsibilities Daily check the information in OSP from ATL, Water test and FKM from previous day Review all records and check if all was done according to the procedures, using correct frequency and specification and if incidents were solved proper way. Review with ATL, WT or FKM operator any possible error or doubts Daily visual inspection of the product on each machine in any shift. Review material in hold, low quality records and together with Quality manager take decision Ensuring proper product packaging If needed, organize inspection of casing with quality issue. Responsibility of finalizing claims and analysis in timely manner Organizing their schedule and ensure all utilities needed for their work Responsible for Quality devices in his/her area Communicating with Production and Extrusion Quality and solving quality problems together with them Analyzing Quality data, tendencies Weekly and Monthly Reports required by Quality Manager. Cover vacation for any other Quality Technician. Back up of Quality Manager in his absence. Qualifications Education: Bachelor's degree is preferred, but not required, in some engineering fields, such as industrial engineering, chemical engineering, etc. Experience 2 years of experience in Quality areas, with knowledge of quality inspection and quality rejections. Skills Basic management in MS Office Suite (Excel, Word, PowerPoint) Basic knowledge of lab equipment and methods, basic knowledge of ISO system Languages: Bilingual (English and Spanish) required (oral and written fluency). Strong communication skills Ability to find root cause of problem, solution Abilities Strong control of the process, good organization, improvement mind Other characteristics such as personal characteristics - responsibility, accuracy, sincerity. Competencies Required Competencies: Communication Adaptability Ethics Problem Solving Teamwork Working Conditions Within the production facility the environment is controlled. There are times that require inside and outside working so ups and downs in temperature are normal. Must follow all safety regulations at all facilities and wear all proper safety equipment. Steel toe shoes, hearing protection, safety glasses, and goggles are required in certain areas of the plant. The facility is also a BRC food packaging facility so all requirement of the BRC must be followed Physical Requirements Must be able to spend a considerable amount of time working on the production floor among a variety of different machines/chemical and physical laboratory. Work on feet for long periods of time. Some lifting required. Must be aware of your surroundings at all times. Must be willing to work in wet environments doing testing when necessary Direct Reports ATL and WT Quality Collagen Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Construction Materials Testing (CMT) Technician Thompson Engineering is seeking qualified Construction Materials Testing (CMT) Technicians for multiple locations. This position is responsible for the daily oversight of construction materials testing and inspection activities on active construction sites to ensure compliance with project specifications, industry standards, and quality requirements. Ideal candidates will demonstrate flexibility and a willingness to travel across multi-states to various job sites as needed. Key Responsibilities Perform field testing of construction materials using a 40-pound nuclear density gauge Obtain concrete samples from ready-mix trucks and prepare concrete test cylinders Conduct concrete testing and transport samples to the laboratory for further analysis Collect, document, and deliver soil samples from job sites to the laboratory Observe construction activities and accurately record performance data Perform visual inspections of reinforcing steel (rebar) Maintain detailed daily field diaries documenting project activities Prepare and submit daily reports and required documentation to the Team Leader in accordance with project specifications Ensure quality and quantity standards are met on all assigned work Proactively review project documents and testing procedures to understand technical requirements Communicate professionally and ethically with clients, contractors, and team members Maintain company-owned equipment in safe, proper working condition Report any required corrective actions to the Team Leader to ensure work quality meets company standards Follow all written procedures, company policies, and safety requirements Complete field activities and reports accurately and in a timely manner Perform all duties in a professional, ethical manner Additional Responsibilities Establish personal goals for continuous improvement and job performance Maintain reliable, punctual, and regular attendance Attend and actively participate in safety meetings and training programs Perform other duties as assigned Qualifications Minimum Requirements High school diploma or equivalent Minimum of six (6) months of construction materials testing experience ACI Level I Certification (or ability to obtain) Nuclear Gauge Certification Ability to communicate effectively both verbally and in writing Valid driver's license Ability to read and write in English Willingness to travel to various job sites as required Level and compensation commensurate with experience Physical Requirements Ability to work flexible schedules and overtime as required by operational needs Ability to lift and carry a minimum of 50 pounds Ability to safely operate a company vehicle Ability to push or pull up to 400 pounds using a wheelbarrow Ability to walk, stoop, bend, climb stairs and ladders Ability to work on uneven terrain including concrete, gravel, dirt, and grass Ability to work at elevated heights and in open structures Ability to work outdoors for extended periods in varying weather conditions Ability to wear required personal protective equipment (PPE) About Thompson Engineering Founded in 1953, Thompson Engineering provides quality assurance and professional services for construction projects supporting industrial, infrastructure, and community development. Our services include drilling, materials testing, construction inspection, chemistry laboratory services, engineering design, environmental assessments, surveying, geotechnical studies, and construction management. Today, Thompson Engineering is recognized for leadership on projects that define skylines, coastlines, and transportation networks across the Southeast. From project planning and design through construction and completion, we deliver innovative solutions to complex infrastructure and building challenges for industrial, commercial, transportation, federal, and municipal clients.

The Quality Control Inspector will be responsible for ensuring the products meet established quality standards and specifications. This position will involve performing various inspections, tests, and analyses throughout the production process to identify and address any deviations from quality standards. The objective will be to maintain high-quality standards and compliance with regulatory requirements, contributing to customer satisfaction and operational excellence. SHIFT HOURS Monday - Thursday 6:30 AM to 5:15 PM (45-minute lunch break) CORE FUNCTIONS Perform incoming and in-process inspection. Work with production personnel to ensure production and shipment of quality products Knowledge of all production processes and their associated standards. Perform in-process and end-of-the-line product inspections and document findings in the database. Maintaining and improving quality inspection processes.. Use standard measuring equipment. Differentiate between critical and non-critical dimensions and specifications on technical specifications. Communicate with Quality Manager and line supervision when there are findings to determine levels of risk. Work with production personnel to ensure production and shipment of quality products. Maintaining and improving quality inspection processes. Maintain calibration system, write work instructions, assist in training, and implement action plans towards achieving established IATF quality objectives and business goals. Pack out products once assessed and approved from a quality standpoint QUALIFICATIONS & REQUIREMENTS Education and Experience High school diploma or general education degree preferred 3-5 years manufacturing experience preferred. 2 years IATF experience, QA, Lean, and ISO experience preferred. Required Licenses None Skills, Abilities, and Knowledge Skilled in inspecting. Ability to read a tape measure. Travel None COMPETENCIES Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; commits to long hours of work when necessary to reach goals. Completes tasks on time or notifies appropriate person with an alternate plan. Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. Sets and achieves challenging goals; Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence; Takes calculated risks to accomplish goals. Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness. PHYSICAL REQUIREMENTS Exerting up to 20 pounds of force occasionally and/or a negligible amount of force constantly to move objects up to 50 pounds as a team lift. Physical Activities This position is subject to the following physical activities: kneeling, reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, talking, and hearing. Visual Acuity The worker is required to have close visual acuity to perform an activity such as preparing and analyzing data and figures; transcribing; viewing a computer terminal; expansive reading; visual inspection involving small defects, small parts and/or operation of machines (including inspection); using measurement devices; and/or assembly of fabrication of parts at distances close to the eyes. Working Conditions The worker is subject to inside and outside environmental conditions, including heat, noise, vibration, and hazards from a production-based environment. ABOUT REALTRUCK RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep , Bronco and off-road enthusiasts around the world. Globally headquartered in Ann Arbor, Michigan, Real Truck's 5,000+ associates operate from 78 facilities across four continents. RealTruck's industry leading product portfolio, which includes the Husky Liners total vehicle protection brand, boasts over 850 patents and pending applications. The company's omni-channel retail approach delivers a seamless consumer experience online at RealTruck.com, as well as through its 12,000+ dealer network and automotive (OEM) partnerships. For more information, visit www.realtruck.com.

Job Description The Quality Control Inspector will be responsible for ensuring the products meet established quality standards and specifications. This position will involve performing various inspections, tests, and analyses throughout the production process to identify and address any deviations from quality standards. The objective will be to maintain high-quality standards and compliance with regulatory requirements, contributing to customer satisfaction and operational excellence. SHIFT HOURS Monday - Thursday 6:30 AM to 5:15 PM (45-minute lunch break) CORE FUNCTIONS Perform incoming and in-process inspection. Work with production personnel to ensure production and shipment of quality products Knowledge of all production processes and their associated standards. Perform in-process and end-of-the-line product inspections and document findings in the database. Maintaining and improving quality inspection processes.. Use standard measuring equipment. Differentiate between critical and non-critical dimensions and specifications on technical specifications. Communicate with Quality Manager and line supervision when there are findings to determine levels of risk. Work with production personnel to ensure production and shipment of quality products. Maintaining and improving quality inspection processes. Maintain calibration system, write work instructions, assist in training, and implement action plans towards achieving established IATF quality objectives and business goals. Pack out products once assessed and approved from a quality standpoint QUALIFICATIONS & REQUIREMENTS Education and Experience High school diploma or general education degree preferred 3-5 years manufacturing experience preferred. 2 years IATF experience, QA, Lean, and ISO experience preferred. Required Licenses None Skills, Abilities, and Knowledge Skilled in inspecting. Ability to read a tape measure. Travel None COMPETENCIES Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; commits to long hours of work when necessary to reach goals. Completes tasks on time or notifies appropriate person with an alternate plan. Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. Sets and achieves challenging goals; Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence; Takes calculated risks to accomplish goals. Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness. PHYSICAL REQUIREMENTS Exerting up to 20 pounds of force occasionally and/or a negligible amount of force constantly to move objects up to 50 pounds as a team lift. Physical Activities This position is subject to the following physical activities: kneeling, reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, talking, and hearing. Visual Acuity The worker is required to have close visual acuity to perform an activity such as preparing and analyzing data and figures; transcribing; viewing a computer terminal; expansive reading; visual inspection involving small defects, small parts and/or operation of machines (including inspection); using measurement devices; and/or assembly of fabrication of parts at distances close to the eyes. Working Conditions The worker is subject to inside and outside environmental conditions, including heat, noise, vibration, and hazards from a production-based environment. ABOUT REALTRUCK RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep , Bronco and off-road enthusiasts around the world. Globally headquartered in Ann Arbor, Michigan, Real Truck's 5,000+ associates operate from 78 facilities across four continents. RealTruck's industry leading product portfolio, which includes the Husky Liners total vehicle protection brand, boasts over 850 patents and pending applications. The company's omni-channel retail approach delivers a seamless consumer experience online at RealTruck.com, as well as through its 12,000+ dealer network and automotive (OEM) partnerships. For more information, visit ******************

COME BE A PART OF OUR EXCELLENT TEAM! Benefits High School Diploma Preferred, but NOT Required Medical, Dental, and Vision Insurance 100% Company Paid Employee Life Insurance & Short-Term Disability 14 paid Company Holidays 80 Hours of Vacation 40 Hours of Sick 401K w/ GENEROUS Match Eligible Tuition Reimbursement Eligible for Auto Allowance Eligible for Wellness Reimbursement of up to $50.00 Per Month Eligible to Receive Referral Bonuses Team Wear Eligible for Discretionary Bonus Annually Years of Service Awards, Employee Assistance Program, Frequent Employee Appreciation Events & More!! About Hyundai GLOVIS America Inc. GLOVIS America, Inc. is a third-party logistics provider headquartered in Irvine, CA. Since our inception in 2002, we are committed to delivering our customers products via truck, rail, or ocean vessel throughout the U.S., Canada, and Mexico. Glovis America makes every effort to exceed standards by providing quality service to our customers and vendors of the automotive, freight forwarding, parts distribution, used car, and fuel industries. We cater logistics strategies and processes to our customers' needs by utilizing the latest information systems and advanced technologies. Summary The Quality Control Inspector will audit the quality of GLOVIS services including, but not limited to, underbody coat applications, vehicle processing operations, PIO parts installations, load line processes, export processes, body shop repairs, and rail loading. Responsibilities Perform new vehicle audits Must be able to audit the quality of all GLOVIS services and have the ability to detect minor vehicle issues Must have good color vision Inspect cars using GPQMS Audit App, specialized camera, and/or check sheets Properly document results of the inspection and take pictures of non-conforming items Must be truthful when recording results of inspections Alert Supervisor/Manager of quality concerns immediately Provide feedback to resolve compliance issues Audit employee compliance with standardized processes, procedures, bulletins, and work instructions Assist with creating and monitoring corrective actions and countermeasures Provide input on how to correct known issues within various departments Alert Supervisor/Manager of quality concerns that are found during inspection process immediately Notify Supervisor/Manager if units flagged for defects are not repaired in a timely manner Assist with the development of audit strategies Assist with training of new staff on quality inspections Assist with development and implementation of audit strategies, audit related policies and procedures, and assessment schedules This position is required to fill in where needed, including, but not limited to, all Tier 1 & 2 positions Other duties as assigned Skills Ability to adapt to process change and ISO standards Required Ability to follow written and verbal instructions Required Excellent written and verbal communication skills Required Excellent interpersonal skills Required Ability to record and verify numbers 17 characters in length Required Computer literacy with experience in Bluetooth/ RF technology and logistics software Preferred Education & Experience High School Diploma/G.E.D Required Must hold a valid state-issued driver's license without restrictions Required 1 year Quality Inspection Preferred Physical Requirements Drive Walk Working at heights Approx. 20ft Lift up to 25lbs Carry up to 25lbs Push/pull Bend/stoop Kneel Squat/crouch Stand Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. Working and Environmental Conditions This position works in a plant manufacturing/warehouse setting at Montgomery, AL Exposure to loud noises from vehicles and heavy machinery Exposure to indoor and outdoor weather conditions Exposure to chemicals/fumes The information contained herein is not intended to be an all-inclusive list of duties and responsibilities of the job, nor is it intended to be an all-inclusive list of skills and abilities required to do the job. Glovis America, Inc. reserves the right to alter and change this job description at any time without notice based on business needs.

Job DescriptionAre we the road to your future? We are currently searching for an experienced Senior CEI Inspector to support our Gulf Region located in Alabama. Experience in environmental and/or waterline construction is a plus. To be considered for this position, applicants must have, at minimum, 8 years of inspection experience. What you'll be doing: Inspection for compliance with contract documents, standards, and specifications Testing of materials; review of plans; analysis of engineering-related data; and construction survey/layout Keeping daily diaries on project operations, resolves daily constructability issues and trouble shoots problems to mitigate delays to contractor's progress Monitors contractor's daily operations and performs and/or reviews test reports to ensure that all work and materials conform to specifications, plans and contractual provisions. Also monitors utility relocation efforts by inspecting and tracking relocation work Documenting pay records, performing construction calculation, and computer/iPad entry Anticipates contractual problems and advises supervisor of the need for plan revisions, supplemental agreements, or other contract adjustments to improve safety, timely delivery and/or quality of delivered product Ensures compliance with TN EPSC standards, and that all work performed in permitted areas, is done in accordance with the permits Effectively communicates and coordinates work with contractors, subcontractors, utility owners, and property owners to minimize delays and disturbances while maximizing progress of the projects Perform acceptance testing of materials in a laboratory environment and inputs test results into various computer data bases What you need to have: High School Diploma or equivalent 8 + years of progressive inspection level experience or equivalent combination of education and experience Possess a valid driver's license and good driving record Ability to pass a drug test Must be able to perform moderate physical activity including but not limited to walking, climbing, balancing, kneeling, and standing Must be able to lift 70 lbs. Must be able to work nights and weekends as required Must apply safety philosophy and program to all operations Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role Valid driver's license A satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: Employee Stock Ownership Plan (ESOP) Medical, Dental, & Vision 401(k) retirement savings plan + employer matching Paid Time Off (PTO) and holidays Employer-Paid Life/AD&D insurance Employer-Paid short-term disability and long-term disability Wellness incentives Student Debt Retirement Match Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “ For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference .” - Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-DNI AL Alabama

About Us At ENFRA, we blend a rich history with a forward-looking vision. With over 100 years of experience, we are a pillar of stability in the energy infrastructure industry and a leader in innovative energy solutions. Our commitment to leveraging emerging technologies ensures that we remain at the forefront of the Energy-as-a-Service sector. We believe in growth-not just for our business, but for our people. Our team members have the opportunity to advance their careers in a supportive environment that values continuous learning and development. We embrace innovation and encourage creative problem solving to tackle the energy infrastructure and energy challenges of tomorrow. Inclusion is at the heart of our culture. We strive to create a workplace where every voice is heard and valued, fostering a collaborative environment where diverse perspectives drive our success. Join us to be part of a legacy of excellence and a future of groundbreaking advancements. At ENFRA, stability, innovation, and growth are more than just values-they are the pillars of our continued success. Overview The Quality Control Specialist I contributes to the overall success of the organization by ensuring products and services meet customers' expectations, regulatory requirements, project specifications, and the quality control program, The individual is expected to continuous improvement in safety outcomes, operational efficiency and team effectiveness. Responsibilities QC Documentation: The individual will input, maintain and track deficiencies within the QC software system. Site QC Audits: The individual will assist more senior technicians in troubleshooting problems and providing solutions of problems. They will be responsible for visual inspection to ensure the installed product meets project requirements, company standards and local codes. QC Project Reporting: Project reporting involves documenting and communicating the progress, findings and outcomes of quality control activities within the project. Review of Project Documents: This individual will review project documents for accuracy and completeness, checking for errors, inconsistencies, missing information that is related to the project drawings and specifications. Mentoring and Training: The individual will be expected to attend training sessions with the other QC and project team members. Quality Documentation: Managing and maintaining comprehensive documentations of quality control activities, inspections results, weld maps, torque maps and compliance records. Site QC Audits: The individual will be responsible for visual inspection to ensure the installed product meets project requirements, company standards and local codes. Thus, communicating any quality issues or concerns to supervisors, Foreman, and project managers to ensure that we meet customers specifications, local codes and standards. QC Project Reporting: Project reporting involves documenting and communicating project's unresolved issues and driving continuous improvement initiatives. The individual is responsible for enhancing product quality, reducing waste, optimizing processes, and increasing efficiency. This includes collaborating with project superintendents, Foreman and project managers to implement best practices and quality improvement. Review of project documents: This individual will review project documents for accuracy and completeness, checking for errors, inconsistencies, and missing information. They are responsible for ensuring that quality control processes and products comply with industry standards, local codes and customer specifications. Qualifications Required Education, Experience, and Qualifications 4-year degree in a related field. 2+ years' experience in fabrication shop quality control Quality Control training is required. OSHA 10 20 hours Continuing Education Working knowledge of construction codes for mechanical, electrical, and plumbing. Working knowledge of regulatory agency requirements as it pertains to quality control. Working knowledge of nondestructive testing techniques. Ability to read and understand construction documents (contracts/subcontracts, purchase documents, plans, and specifications.). Ability to act as a specialist in quality control, keeping up with changes in the industry, and updating staff as well as corporate for any necessary procedural updates. Proven ability to supervise, communicate and lead personnel. Effective verbal and written communication skills. Detail-oriented and willing to tackle various ongoing projects in a fast-paced environment. Versed in the industry and the Company's competitors. Ability to multitask and perform duties outside of the scope of work when necessary. Preferred Education, Experience, and Qualifications 2+ years of hands-on experience in the layout, fitting, and welding steel pipe and sheet metal. Construction claims experience. Certifications (welding, quality control, nondestructive testing techniques, etc). Expert level knowledge of all welding methods, procedures, and quality control. Working knowledge of all tools and equipment. Travel Requirements 0-5% of the time will be spent traveling to the job site(s)/office locations. Physical Activities Climbing stairs. Remaining in a stationary position, often standing or sitting for prolonged periods Repeating motions that may include the wrists, hands and/or fingers Environmental Conditions Quiet environment Physical Demands Light work that includes adjusting and/or moving objects up to 20 pounds ENFRA is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities, and participates in the e-Verify program. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, age, sexual orientation, gender identity, national origin, veteran status, disability, or any other classification protected by law.

Quality inspectors are responsible for evaluating products and services, inspecting defects, ensuring compliance with safety requirements, and documenting their findings. Lift over 25lbs All Job Posting Locations (Location) Wetumpka Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Do you enjoy working in a physically active environment? Do you want the opportunity to start a job that will turn into a career with dedication and time? If you answered "yes!", then we want you as part of our team! Our QC Techs have an eye for detail and a basic understanding of lumber measurements and computers. They are crucial in ensuring the quality of our products. If this sounds like a team you would like to be part of, apply today!! SUMMARY OF FUNCTIONS Work in the planer/sawmill, continuously monitoring the machine centers and processes for accurate production of lumber. The goal of the Quality Control Technician is to maintain and increase the recovery of lumber from each log. ESSENTIAL DUTIES AND RESPONSIBILITIES Consistently measure and record thickness & width measurements at each machine center, according to the procedures developed. Perform daily manufacturing quality checks according to the procedures developed to determine if machine centers are operating at an optimum level. Document findings, maintain records and communicate to mill personnel when lumber is off-specification. Assist mill personnel in bringing lumber back into specification. Provide training to mill personnel on identifying quality issues and communicating those issues back to QC Supervisor. Generate reports that show performance trends on quality indicators. Complete production tallies, downtime tallies, and daily reports as required. Assist supervisor in developing quality processes in other areas as needed. QUALIFICATIONS Understand and follow oral or written instructions issued by supervisors. Ability to exert muscle force repeatedly or continuously over time. Ability to bend, stretch, twist, or reach with body, arms, and/or legs. Understanding of correct lumber manufacturing processes. Understanding of the relationship between volume, value, and recovery. Working knowledge of planer/sawmill machinery. General knowledge of optimization. Comfortable with basic computer skills. Ability to communicate effectively to other operators/supervisors. Attention to detail. Ability to watch gauges, dials, or other indicators to ensure a machine is working properly. Ability to complete production tallies, downtime tallies, and daily reports as required. Understand basic mathematical skills. Work well both independently and as part of a team. SAFETY Follow all area/machine center specific safety regulations Wear all required personal protective equipment: hardhat, safety glasses, hearing protection, etc…as required Do not enter restricted areas Report immediately to supervisor any equipment that is unsafe or functioning improperly Request assistance when a task exceeds individual knowledge Visually inspect equipment and area before starting/operating Whenever possible, eliminate unsafe conditions as soon as possible Use Standard Lockout Procedures when appropriate for machine centers Use proper lifting technique by pushing, pulling and lifting with your legs and not your back Never approach a saw while it is still running Follow all other safety regulations as set forth by the company COMPANY BENEFITS We offer outstanding benefits that includes Company Paid Health Insurance Prescription Drug Insurance Dental and Vison Insurance Telemedicine Program through Teladoc Wellness Incentives Paid Time Off 7 Paid Holidays Term Life Insurance, Accidental Death Insurance, Critical Care Insurance Employee Assistance Program Strive Rewards Program Employee Referral Program Safety Incentives Uniform Rental Boot Loans

Performs a variety of quality control tests/inspections on products, materials, components, parts, etc., at various stages of the production process to ensure compliance with quality and reliability standards. Records statistical data. Analyzes data and writes summaries to validate or show deviations from existing standards. Recommends modifications to existing, or suggests new, standards, methods, and procedures. Typically, has up to 3 years of experience in position or specialization. Applies basic skills and may develop advanced skills using tools and equipment appropriate for the position or specialization. Duties and tasks are standardized. Resolves routine questions and problems and refers more complex issues to higher levels. Works independently and as a team promoting cohesion within Regal Rexnord while following standard procedures and written instructions to accomplish assigned and known tasks. Responsibilities: Requires ability to read complex drawings. Understand Bill of Materials and have a working knowledge of manufacturing processes that may include turning boring grinding balancing, heat treating, coatings or others needed to manufacture components to the drawings and specifications. Makes decisions on whether parts meet the drawing/router specs and write scrap tickets when non-conforming product is realized. Attach inspection reports and balance records to SAP. Must have the ability to read and calibrate all gauges available in the plant. Will need the ability to learn the CMM; this includes the Zeiss and Keyonce machines. Scanning and filing production routers and material certifications will be required. Coordinate returned product through the RMA process. Actively participate in process and department improvement discussions. Qualifications: MACHINES, TOOLS, EQUIPMENT, WORK AIDES: Must be computer proficient and SAP experience a plus Minimum Education: High school or GED Minimum Experience: A minimum of 3 years of experience in the field or in a related area Necessary Skills: High Level verbal and written communication skills- English primary High school level math skills Work in a constant state of alertness Regular and predictable attendance “Restrictions imposed by federal export control laws may limit this job opportunity to candidates who are a “U.S. Person”, which includes U.S. citizens, U.S. nationals, U.S. permanent residents, individuals granted asylum in the United States, and refugees in the United States, or who otherwise can qualify for a license that permits them to hold the position.” Benefits Medical, Dental, Vision and Prescription Drug Coverage Spending accounts (HSA, Health Care FSA and Dependent Care FSA) Paid Time Off and Holidays 401k Retirement Plan with Matching Employer Contributions Life and Accidental Death & Dismemberment (AD&D) Insurance Paid Leaves Tuition Assistance About Regal Rexnord Regal Rexnord is a publicly held global industrial manufacturer with 30,000 associates around the world who help create a better tomorrow by providing sustainable solutions that power, transmit and control motion. The Company's electric motors and air moving subsystems provide the power to create motion. A portfolio of highly engineered power transmission components and subsystems efficiently transmits motion to power industrial applications. The Company's automation offering, comprised of controls, actuators, drives, and precision motors, controls motion in applications ranging from factory automation to precision control in surgical tools. The Company's end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture. Regal Rexnord is comprised of three operating segments: Industrial Powertrain Solutions, Power Efficiency Solutions, and Automation & Motion Control. Regal Rexnord has offices and manufacturing, sales and service facilities worldwide. For more information, including a copy of our Sustainability Report, visit RegalRexnord.com. Equal Employment Opportunity Statement Regal Rexnord is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, pregnancy, age, ancestry, national origin, genetic information, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you'd like to view a copy of the company's affirmative action plan for protected veterans/individuals with disabilities or policy statement, please email ***************************. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail ***************************. Equal Employment Opportunity Posters Notification to Agencies: Please note that Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third-party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third-parties for hires made.

Job Title: Quality Inspector - Automotive Manufacturing Shift: 1st Shift Hours: 6:00am - 2:30pm Schedule: Monday-Friday, weekends when needed PAY RATE: $17.00/hr Join our team and take the next step in your career. PPG Quality is a leading provider of manufacturing solutions, specializing in quality inspection, workforce support, and operational services for manufacturers and parts suppliers. We proudly serve industries including automotive, aerospace, medical devices, electronics, motorcycles, and food production. Headquartered in northern Atlanta, PPG Quality operates across the United States, Canada, and Mexico. We are committed to rapid career advancement and developing future leaders in manufacturing. At PPG Quality, we foster a culture of excellence, collaboration, and personal growth-where every team member is empowered to perform at their highest level. Job Summary Quality Inspectors are responsible for a wide range of hands-on duties including sorting, inspection and data capture. They work directly with customers to resolve and prevent quality issues, reinforcing PPG QUALITY'S commitment to superior solutions. Work environments vary from yard sorts, manufacturing facilities, warehouses, etc. - whatever the customer needs. Inspectors must be flexible with a strong sense of accountability and attention to detail. The success of our organization depends on the dedication of our team members. Key Responsibilities Perform sorting, inspection, and basic production tasks Accurately enter data and maintain records Follow all written instructions, policies, and operational rules Keep work area clean and organized Operate inspection tools, measurement devices, and test equipment - training available Fulfill additional duties as assigned Job Qualifications Adaptable to changing environments Positive attitude and self-driven work ethic Flexible to work overtime as needed Top Reasons to Work for PPG Quality Weekly competitive pay Free Training - No experience required Benefits - Medical, Dental and Vision from day one Career Growth - Advancement opportunities Make a difference in an evolving industry At PPG Quality, we prioritize your well-being. Our affordable and convenient health benefits include: Medical Insurance $25 copays for doctor's visits Free Teledoc Service for easy virtual healthcare access Vision Insurance Dental Insurance #PPG1 Got an eye for detail? If you're the kind of person who spots the little things that make a big difference, we want you on our team. APPLY TODAY! PPG Quality is proud to be an equal opportunity workplace. We are committed to providing equal employment opportunities regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or veteran status. PPG Quality complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities.

Now Hiring: QA/QC Technician - Data Center Project (Montgomery, AL) Pay: TBD, based on experience Per Diem: TBD for qualified travelers Schedule: Full-time | Long-term project United Trades of America is currently hiring a QA/QC Technician for a high-profile data center construction project in Montgomery, Alabama. This is a critical role focused on ensuring quality, safety, and compliance across all phases of construction. If you are detail-oriented and experienced in quality assurance/control for industrial or commercial builds, we want to hear from you. Key Responsibilities: Perform inspections and testing of mechanical, electrical, or structural systems according to project specifications Monitor installation practices and ensure adherence to quality standards and safety protocols Maintain accurate and up-to-date QA/QC documentation, reports, and logs Collaborate with site supervisors, engineers, and subcontractors to identify and resolve deficiencies Ensure compliance with drawings, specs, ITPs, and applicable codes Document and report non-conformance issues and confirm resolution through corrective actions Qualifications: Minimum 3 years of QA/QC experience in commercial or industrial construction Experience with data centers or mission-critical projects is highly preferred Strong working knowledge of ITPs, submittals, RFIs, and construction documents Familiarity with construction codes, specifications, and jobsite safety requirements Proficient in Microsoft Office and QA/QC tracking tools Excellent communication and documentation skills OSHA 10 or 30 certification preferred Additional Requirements: Must provide own PPE and tools Must be able to pass a background check and drug screening How to Apply: 📩 Submit your resume and certifications at ***************************** 📧 Or email directly to ******************************

Information Job Title: Department/Location: Quality Technician - Collagen Quality/Montgomery Reports To Title: Work Schedule: Quality Manager Weekdays 40 hours per week + flexibility for additional work if required Job Purpose To follow up day to day quality in the Montgomery facility, ensure correct measurement and disqualification criteria, make sure the product meets quality expectation and initiate quality improvement Duties and Responsibilities Daily check the information in OSP from ATL, Water test and FKM from previous day Review all records and check if all was done according to the procedures, using correct frequency and specification and if incidents were solved proper way. Review with ATL, WT or FKM operator any possible error or doubts Daily visual inspection of the product on each machine in any shift. Review material in hold, low quality records and together with Quality manager take decision Ensuring proper product packaging If needed, organize inspection of casing with quality issue. Responsibility of finalizing claims and analysis in timely manner Organizing their schedule and ensure all utilities needed for their work Responsible for Quality devices in his/her area Communicating with Production and Extrusion Quality and solving quality problems together with them Analyzing Quality data, tendencies Weekly and Monthly Reports required by Quality Manager. Cover vacation for any other Quality Technician. Back up of Quality Manager in his absence. Qualifications Education: Bachelor's degree is preferred, but not required, in some engineering fields, such as industrial engineering, chemical engineering, etc. Experience 2 years of experience in Quality areas, with knowledge of quality inspection and quality rejections. Skills Basic management in MS Office Suite (Excel, Word, PowerPoint) Basic knowledge of lab equipment and methods, basic knowledge of ISO system Languages: Bilingual (English and Spanish) required (oral and written fluency). Strong communication skills Ability to find root cause of problem, solution Abilities Strong control of the process, good organization, improvement mind Other characteristics such as personal characteristics - responsibility, accuracy, sincerity. Competencies Required Competencies: Communication Adaptability Ethics Problem Solving Teamwork Working Conditions Within the production facility the environment is controlled. There are times that require inside and outside working so ups and downs in temperature are normal. Must follow all safety regulations at all facilities and wear all proper safety equipment. Steel toe shoes, hearing protection, safety glasses, and goggles are required in certain areas of the plant. The facility is also a BRC food packaging facility so all requirement of the BRC must be followed Physical Requirements Must be able to spend a considerable amount of time working on the production floor among a variety of different machines/chemical and physical laboratory. Work on feet for long periods of time. Some lifting required. Must be aware of your surroundings at all times. Must be willing to work in wet environments doing testing when necessary Direct Reports ATL and WT Quality Collagen Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Quality inspectors are responsible for evaluating products and services, inspecting defects, ensuring compliance with safety requirements, and documenting their findings. Lift over 25lbs All Job Posting Locations (Location) Wetumpka Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.