Quality inspector jobs in Mount Prospect, IL

Akkodis is seeking an Quality Inspector for a 8+ Contract position with a client located in Aurora, IL Pay Range: $22/hr - $23/hr (The rate may vary based on experience, education, geographic location, and other factors.) Position Responsibilities The OPS Quality Inspector performs in-process inspections and tests of manufactured parts and assemblies to verify conformance with established quality standards. Perform in-process dimensional and visual inspections of parts and subassemblies at different stages of the manufacturing process to ensure compliance to all in-process, drawing and order requirements. Conduct in-process tests such as positive material Identification tests, hardness tests, paint thickness tests, hydro tests, visual examinations of welds and others as required. Appropriately identifies and segregates non-conforming material and initiates a nonconforming material report per NCR procedure. High school diploma or general education degree (GED). Two years of related experience in a manufacturing environment. Strong attention to detail and ability to detect defects in products. Must be able to interpret basic blueprints specifications, diagrams, and other written instructions. Strong visual abilities: able to visually identify defects, annual vision examen required. Ability to use calipers, micrometers, thread gauges, hardness testers, optical comparators, thickness testers, XRF analyzers and others. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. If you are interested in this Quality Inspector job, then please click APPLY NOW. For other opportunities available at Akkodis go to **************** If you have questions about the position, please contact Sunny Kumar at *****************************. Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ****************************************** The Company will consider qualified applicants with arrest and conviction records by federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Pride Health is hiring a Quality Control Technician to support our client's medical facility based in Elmhurst, Illinois. This is a 13-week contract job opportunity and a great way to start working with a top-tier healthcare organization! Job Summary: The Sterile Processing Quality Control Technician ensures the highest standards of instrument cleanliness, assembly accuracy, and quality assurance in sterile processing operations. This role combines hands-on technical processing responsibilities with detailed inspection and documentation tasks critical to patient safety and process reliability. This position focuses on quality assurance beyond standard sterile processing technician duties, ensuring compliance with all regulatory and internal standards while maintaining an unwavering commitment to safety and process excellence. Job Responsibilities: -Follow all ANSI/AAMI standards, manufacturer Instructions for Use (IFUs), SOPs, and company Work Instructions. -Decontaminate used surgical instruments and equipment using proper PPE and protocols. -Disassemble, clean, and reassemble complex surgical instruments as required. -Accurately assemble and package instrument trays and sets per guidelines. -Operate washers, sterilizers, and other processing equipment safely and effectively. -Inspect instruments for cleanliness, functionality, and damage prior to packaging. -Document missing or damaged instruments per SOPs. Required Skills & Experience: -Hands-on experience in sterile processing, demonstrating proficiency in decontamination, assembly, and sterilization procedures. -Strong attention to detail. -Ability to work effectively under pressure in a fast-paced, team-oriented environment. -General knowledge of surgical instruments and processing protocols. -Knowledge of sterilization techniques, including steam sterilization and infection control practices. -Familiarity with ANSI/AAMI standards and manufacturer Instructions for Use (IFUs). Additional Information: Location: Elmhurst, Illinois Schedule: 2nd Shift- 3 pm-11:30 pm & 3rd Shift- 11:00 pm-7:30am Pay Range: $24/Hr. - $28/Hr. Start: 12/15/2025 *Offered pay rate will be based on education, experience, and healthcare credentials. Interested? Apply now! About Pride Health As a certified minority-owned business, Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - are committed to creating a diverse environment and are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics. Pride Global offers eligible employee's comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance, and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors.

Johnson Service Group (JSG) is currently looking for a QC Technician with at least one year of Quality experience in an ISO Manufacturing facility. This is a contract with a global leader located in Niles IL. This is 100% onsite and has the chance to convert to direct hire. Hours are 5am to 2pm. Pay $19/hour Description Of Duties Conduct material/product inspections including but not limited to: incoming, process, first piece, supplemental and final inspections Measure and record material/product accurately using calibrated measuring equipment Control of non-conforming material/product Maintain material/product traceability and documentation Ensure tools, gauges, instruments and other measuring and testing equipment are calibrated Capable of carrying up to 40 lbs. Able to stand 4-6 hours daily (Ideally 6-8 hours/day) Skills and Experience Required: Basic mechanical aptitude Knowledgeable in Microsoft Excel and Word Proficient in all areas of quality inspection Experience using measuring equipment (micrometers, calipers) to ensure compliance with specifications Able to visually recognize and measure particulate as small as 0.8 sq. mm. Must successfully complete and pass a color deficiency test Minimum of one-year experience as a Quality Assurance/Quality Control Inspector in an ISO certified (or equivalent) manufacturing environment Proficient in English, written and spoken (bilingual in Spanish a plus) Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with over 35 years of experience investing in people and companies. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. #D400

Job Posting Start Date 12-03-2025 Job Posting End Date 01-12-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a Quality Control Inspector located in Buffalo Grove, IL Reporting to the manager the potential candidate would inspect electronic systems, assemblies, subassemblies, components and parts for conformance to specifications. 0600pm-0600am Rotating Shift Responsibilities: Performs visual inspection of electronic card and sub-assemblies, and systems or units to ensure that all product meets the established specifications for reliability and workmanship. Utilizes gages, templates, microscopes and other manufacturing aids to ensure that all product meets the established specifications for reliability and workmanship. Ensures that all required process operations have been performed on the product that is being inspected. Enters all quality data into the appropriate electronic or manual systems. Notifies the appropriate personnel if unusual product defects are identified or if process falls below acceptable levels. Provides timely feedback to manufacturing if non-conforming product is identified. Accurately completes all administrative activities associated with quality inspection. Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards. Assists with the disposition of all non-conforming materials/product. Qualifications: Completion of a high school degree or equivalent is preferred. Successful completion of company provided training may be required. Typically requires 6-12 months of related experience. AW20 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to Illinois)$17.98 USD - $24.27 USD HourlyJob CategoryQuality Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Temp Key Responsibilities: Inspection of incoming and outgoing products and materials to engineering and specifications using basic test and measuring equipment. Ability to work with handheld gauges, such as calipers, micrometers, height gauges, and pin gauges. Ability to work with an optical comparator. Able to read and interpret blueprints. Knowledge of GD&T is a plus. Experience with engineering drawings and tolerances, standards, and specifications. Upload your resume or send it to ***************** Benefits Offered: 401(K) 401(K) matching Dental, Vision, Life, and Health insurance (after 60 days) Paid Time Off/ IL Plawa Qualifications: 1- 2 Years of experience performing close/tight-tolerance mechanical inspections required.

Job Description Key Areas of Responsibility (Answerable for the following end results) 1. Inspect parts at 200% inspection of headliners. 2. Assist hourly workforce with end of line (EOL) responsibilities. 3. Support APQP activities including PPAP, Trial Runs, and Engineering changes. · Perform Inspection activities as needed. · Verify material is properly identified · Provide and communicate breakpoint 4. Ensure all nonconforming material is properly identified, contained and dispositional per the Control Plan and BOS. · Identify and communicate nonconformance internally and between shifts · Monitor effectiveness of Quality Alert · Provide and communicate breakpoint · Support problem solving activity · Escalate out of specification conditions per Control Plan requirements 5. Ensure area of responsibility, equipment, inspection fixtures and documentation is organized, clean and in good working order and communicate any out of order conditions. 6. Document all activities as required. 7. Adhere to all company guidelines for Emergency Evacuation to ensure employee safety. 8. Any additional responsibility deemed necessary by management. Limits of Authority · Advise Department Supervisor/Manager of those situations that may pose a significant risk to the program, product assurance, facilities, employee safety or customer satisfaction results. · Communicate and work adjacent with Quality Coordinator to reach Quality goals · Initiate actions to prevent the occurrence of any nonconformance relating to product, process & systems. · Identify and record any problems relating to the product, process or system. · Initiate, recommend or provide solutions through the appropriate channels and verify implementation. · Control further processing and delivery of nonconforming product until the deficiency is corrected. Basic Education, Experience and Training Requirements · High school diploma or equivalent. · At least 1 year of automotive experience is preferred. · Excellent written, mathematical, interpersonal and analytical skill. · Proficient computer skills in Word, Excel, Power Point, and data entry. · Working knowledge of statistics. · Able to maintain confidentiality on products, services and processes. · Must be flexible and able to work across all shifts as needed. Internal Training Requirements · Dakkota Orientation · Dakkota Vision and Culture · Departmental Training o Process 12 - Preventive, Corrective and Nonconformance Management o Process 16 - Quality and Inspection Management · Company Training o BOS Overview o Information Technology o Outlook o Purchase Requisitions · Quality Mission Statement Health, Safety and Physical Demand Requirements · Normal amount of sitting and standing, average mobility to move around an office and plant environment, able to conduct normal amount of work on a computer. Risks Associated with Job Function · None Travel Requirements · None Life at Dakkota Our success is rooted in meaningful relationships and a culture that feels like family. We champion compassion, respect, and work-life balance, while supporting each team member's personal and professional growth. Through ongoing development, competitive pay, and a comprehensive benefits package, we empower our people to thrive both at work and in life. The pay range for this role is $36,700 - $43,200 per year. This role is also eligible for bonus/incentive pay. The pay range listed for this position represents a good-faith estimate of potential compensation at the time of posting. Actual pay may vary based on factors such as experience, skills, and location. This range is subject to change in the future and does not guarantee a specific salary. Our benefits include paid time off, medical, dental, and vision coverage, and a 401(k) plan for eligible employees. Explore everything we have to offer at Dakkota Careers!

Quality Control Inspector Elgin, IL Currently looking for a Quality Control Inspector to fill an opening with a metal stamping company in Elgin, IL. Interested candidates should have at least one year of quality control inspection experience in manufacturing. More than one year of experience will be strongly considered. Responsibilities of the Quality Control Inspector Be responsible to measure parts using GD&T if necessary and to use metrology such as Vernier calipers, micrometers and gages Be able to inspect parts per print including work-in-process and finished goods Review and follow quality control plans and participate in testing for parts including non-conforming parts for review by the MRB Material Review Board Be on the shop floor and in the lab to review materials, dimensions and other specifications to verify conformance to customer requirements Be trained for and be responsible for maintaining and cleaning the tools of metrology such as height gages, calipers, go/no go gages, optical comparators, CMM Coordinate Measuring Machines and other equipment Assist with the development of quality inspection plans such as for first piece, in-process and last piece inspections Be trained to if necessary and apply your knowledge to assist with the development of PFMEA's and Quality Control Plans Meticulously focus maintaining quality documentation Requirements of the Quality Control Inspector At least one year of quality inspection experience in manufacturing Bilingual Spanish speaking is a plus High School Diploma Compensation for the Quality Control Inspector The targeted annual base salary for this first shift position ranges from $23.00 to $33.00 per hour depending on experience and is temp to perm or contract to hire

Dynamic Manufacturing, Inc. has an exciting opening for a motivated Quality Technician to join our team! A successful Quality Technician will be mechanically inclined, display a continuous improvement mindset, and ideally have experience in a manufacturing or aerospace environment. At Dynamic Manufacturing, we offer: An Engaging Work Environment Opportunities for Advancement Tuition Reimbursement Competitive Pay (we pay weekly!) Comprehensive Benefits Package & 401(k) Match Generous Paid Time Off, and more! Responsibilities: Write and revise Job Instructions, Control Plans, Quality Alerts, Support Documents, or other documents as required and process ECIs accordingly. Review training records of Job Instructions, Control Plans, Quality Alerts, Support Documents, or other documents as required. Perform PPAP Audits and assist with PPAP activities. Update 3 Panel Charts - Root Cause for weekly Quality meetings. Create monthly Warranty Charts to present to customer. Work with Production, Calibration and Engineering Team members to address fixturing and inspection gaging issues. Perform weekly LPAs (Layered Process Audits) and maintain reports. Assist with Containment, sorting and receiving inspection activities as required. Be a problem first responder and assist with resolving production issues, determine Root Cause and disposition nonconforming products. Interface with CMM Inspection Lab and Teardown and Sediment Labs as necessary to resolve issues. Use QAD to determine stock locations and quantities for suspect material and other activity, as necessary. Perform inspections with Calipers, Micrometers, or other devices, as necessary. Visual Factory maintenance, daily Torque and Masters checks. Ensure compliance and assist with adherence to the Quality Management system (IATF16949/ISO9001). Qualifications: 1-2 years experience in a related field Working knowledge of Excel and Word. Ability to learn Access, Teams, OneNote and QAD. Familiarity with IATF16949 or other quality systems desirable. Manufacturing experience as a quality inspector or quality technician preferred. Able to perform basic mathematical calculations. Strong written and verbal communication skills. Spanish as a second language a plus. Ability to work in shop floor environment & be able lift 50 lbs. The above statements are intended to describe the general nature and level of the work being performed in this job. This is not an exhaustive list of all duties and responsibilities. The management of Dynamic Manufacturing, Inc. reserves the right to amend and change responsibilities to meet business and organizational needs. WHY CHOOSE DYNAMIC? Dynamic Manufacturing is a family owned and operated organization formed in 1955 by John Partipilo. Our organization specializes in the manufacture of automotive, off-road, industrial and racing powertrain products. This includes Torque Converters, Transmissions (Automatic, Manual, Hybrid models) and Transfer Case Assemblies. Our organization started with a single retail facility and a dream. Today, we serve the aftermarket and several OE customers. Our operations consist of almost a million square feet of floor space and 1,000+ extremely talented employees encompassing turnkey operations from engineering, total machining operations, through assembly and dynamometer testing. We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Receives specific assignments from the station manager relative to inspection position to be worked and any special instructions needed. Performs assigned tasks obtaining assistance as required for unusual or difficult problems encountered. Work is reviewed in terms of ability to complete accurate emission inspections within established time limits, follow proper test procedures, ability to deal effectively with the public, and cash collection accuracy. * Serves as lead lane inspector performing emission inspection functions in all test positions. * Assists in directing and training Lane Inspectors. * Follows established emission inspection procedures in testing vehicles. * Responsible for collecting inspection fees and accounting for the proper dollar amount collected in cash and charges. * Enters appropriate vehicle information into computer and verifies vehicle data against computer data. * Performs general lane operations including: tag renewals, greeting motorists as they enter the inspection station and provides general program information. * Operates vehicles during the emissions and evaporative system test. * Provides test results to customers and explains the printout as necessary. * Instructs customers on the next step in the inspections process after test is completed. * Collects documents from customers relative to inspection re-tests. * Refers questions or comments to appropriate individuals. * Performs other duties as assigned such as janitorial, lawn maintenance, and other facility care tasks as required. * Assists with opening and closing the station as needed. * Must be available to work 40 hours per week during station operating hours Tues-- Sat 8AM--6PM * Assist other stations as needed and as assigned. * Excellent customer service skills. * High School Diploma or equivalent preferred. * Previous computer and automotive experience helpful. * Must be 18 years of age. * Candidate must be in good standing with company. * Must possess manual dexterity sufficient to operate computer keyboard, make electronic equipment connections * Ability to endure long period of standing and walking. * Ability to stoop, bend, twist, reach and squat and balance body weight on one or both knees. * Ability to work in extreme hot and cold weather. * Ability to operate a motor vehicle, including a manual transmission and to operate testing equipment.

Job Title: Quality Control Inspector Department: Quality Reports to: Quality Control Manager Classification: Non-Exempt Travel: None GWS is the North American leader in the design and manufacturing of custom cutting tools. Servicing industries including Aerospace, Automotive, Medical, Energy and general Engineering. As the fastest growing company in our industry, the career opportunities are numerous and the pathways for advancement nearly limitless. Entry-level position with limited prior training or relevant work experience. Has basic skills to perform routine tasks. Works within clearly defined standard operating procedures. Works with either close supervision or under clearly defined procedures. Job Summary: The Quality Control Inspector is responsible for ensuring that all products meet customer and company standards by inspecting end mills and form tools at the end of production. Responsibilities include inspection and test of product, process audits and disposition of non conforming product. Coordinating the use, calibration, and servicing of all inspection equipment. Duties/Responsibilities: Inspect cutting tools manufactured within extremely tight tolerances. Examine tools for proper geometry within blueprint specifications. Compare quantity and part number of items received with procurement data and other specifications to ensure completeness of and accuracy of order. Approve or reject items, and record inspection and disposition data. Inspect incoming raw material, thin film coating, vendor supplied tooling, grinding wheel geometric configurations and final inspections. Prepare inspection procedures for reference use in subsequent inspections. Run inspection programs for in-process process and final inspection. Assist in etching product identifications. Other duties as assigned. Education and Experience: High school diploma or general education degree (GED) or 1-3 years industry related experience and/or training. Certification from a qualified training institution in the field of tool and cutter grinding is ideal but not . Manufacturing experience is . Strong geometry knowledge is . Experience with hand gauges and non contact-contact inspection equipment is required. Required Skills/Abilities: Ability to convert metric to inch and decimal to fractions. Strong analytical troubleshooting ability. Uses standard operating procedures to guide own work and solve standard problems. Applies basic skills to perform simple activities. Understands how the assigned duties relate to others in the team and how the team integrates with others. Uses communication skills to exchange information. Use assigned methods, tools and processes. Support sharing of best practices. Familiarity with navigating Windows based computer programs. knowledge of the gauge calibration process. Ability to read and comprehend blueprints. Knowledge of calipers, hand micrometers, and metrology equipment. Ability to work in a fast paced manufacturing environment. Involvement And Knowledge of the use of quality management system procedures, forms, work instructions, and certifications. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.

Receives specific assignments from the station manager relative to inspection position to be worked and any special instructions needed. Performs assigned tasks obtaining assistance as required for unusual or difficult problems encountered. Work is reviewed in terms of ability to complete accurate emission inspections within established time limits, follow proper test procedures, ability to deal effectively with the public, and cash collection accuracy. Serves as lead lane inspector performing emission inspection functions in all test positions. Assists in directing and training Lane Inspectors. Follows established emission inspection procedures in testing vehicles. Responsible for collecting inspection fees and accounting for the proper dollar amount collected in cash and charges. Enters appropriate vehicle information into computer and verifies vehicle data against computer data. Performs general lane operations including: tag renewals, greeting motorists as they enter the inspection station and provides general program information. Operates vehicles during the emissions and evaporative system test. Provides test results to customers and explains the printout as necessary. Instructs customers on the next step in the inspections process after test is completed. Collects documents from customers relative to inspection re-tests. Refers questions or comments to appropriate individuals. Performs other duties as assigned such as janitorial, lawn maintenance, and other facility care tasks as required. Assists with opening and closing the station as needed. Must be available to work 40 hours per week during station operating hours Tues-- Sat 8AM--6PM Assist other stations as needed and as assigned.

Quality Control Associate (Entry Level) Inspect and document vehicles for carrier damage Verify reported vehicle damage on and off rail cars Help manage facility access until repairs are completed Transmit damage document to the OEM reporting sites (Data Entry) Report damages in the BNSF system Training Provided Areas of Responsibility: Comply with all industry, client, and company safety regulations and operating procedures Work independently and with a team Other tasks as assigned What's Required: High School Diploma or GED Safety first mentality Able to meet attendance requirements Basic knowledge of Microsoft Office Suite Able to work on rail cars in all elements (outside position) Valid driver's license Type: F/T Pay: $20/ hr Hours: Wed-Sun 8:30AM-5:00PM We Offer: A Full Benefits package including Medical, Dental, 401K Paid Holidays and Vacations An annual Steel Toe Boot allowance All Personal Protective Equipment (PPE) provided Veteran Friendly We love to promote hard workers Company Overview: Established in 1987, Road & Rail Services has grown and diversified to become a leading provider of rail-related services in North America. Our network of skilled associates provides plant and terminal operating expertise as well as field maintenance of rail assets for railroads, rail shippers, and owners of rail related equipment and facilities. Visit us online at ******************* for more information!

Seeking a quality control inspector to inspect carbide cutting tools including drills, reamers, and endmills. 2nd Shift M-F 2:30-11pm and Saturday 6am-11am Must know how to use micrometers, dial indicators, point micrometers and scales. Will be trained on how to perform ISO audits.

Quality Inspector 💲 Pay: $18 - $25/hour (based on experience) ✨ Full Benefits Package after 60 days 🔎 Ludlow uses E-Verify to confirm work eligibility in the U.S. Do you take pride in details and have a passion for quality? Do you have experience in a manufacturing, (sheet metal, welding) environment? Join our team as a Quality Inspector and play a key role in ensuring our products meet the highest standards. This role is perfect for someone who enjoys hands-on work, problem-solving, and making a real impact in a fast-paced manufacturing environment. What You'll Do Inspect materials, in-process, and finished products Use precision tools (calipers, micrometers, gauges, etc.) Document results and maintain quality records Support continuous improvement and ISO 9000 standards Inspect parts and assemblies to ensure they meet blueprint and customer specifications What We're Looking For Required Skills & Experience 3-5 years of experience in a quality inspection role within manufacturing (sheet metal, welding, or related environment) Strong ability to read and interpret blueprints, drawings, and manufacturing prints Proficient in using measuring tools (calipers, micrometers, height gauges, etc.) Familiarity with ISO 9000 standards and Statistical Process Control (2-3 years) High school diploma or equivalent Proficiency in Microsoft Office (Outlook, Word, Excel, PowerPoint) Excellent communication, problem-solving skills, and knowledge of manufacturing processes Hands-on metal fabrication experience Preferred Skills (a big plus!) Certified AS9100 Internal Quality Auditor Six Sigma Green Belt or Black Belt CMM experience Bilingual (Spanish) Why You'll Love Working Here We believe in taking care of our team. Our comprehensive benefits package includes: Medical, dental, and vision insurance IRA with company match Life insurance, short- and long-term disability Legal, identity theft, and wellness programs Critical illness, hospital indemnity & accident insurance Paid time off, holiday pay, and floating holidays This is more than just a job-it's an opportunity to grow your skills, be part of a supportive team, and make a difference every day. 👉 Apply today and bring your expertise in quality to a company that values precision, integrity, and innovation.

Job Board Only - No Asmts Allowed Joliet Staffing is Hiring: Quality Inspector in Chicago Heights, IL! General Purpose of the Job The Quality Inspector is responsible for ensuring that all customer products are manufactured to the correct specifications throughout the entire production process. This includes verifying compliance with manufacturing requirements and customer standards. Job Title: Quality Inspector Schedule: 6:30 AM - 3:00 PM Pay Rate: $18.00/HR Position Type: Temp-to-Hire Benefits through Jolie Staffing: Medical, Dental, AD&D Essential Duties & Responsibilities Inspect parts according to production drawings before running full production, ensuring all dimensions meet specifications. Maintain daily records of final inspections and shipping processes. Provide assistance to Machine Operators when necessary. Coordinate with production teams to conduct plant-wide gauge and equipment calibration. Identify non-conforming products and properly document all rejected materials/products. Perform in-process product verification as needed. Confirm revision accuracy on all related documentation and products. Maintain basic computer documentation and inspection reporting. Ensure the company complies with applicable manufacturing standards and codes. Inspect incoming raw materials, parts, and subassemblies, mark results, and complete required paperwork. Perform first-piece inspections per control plan before production begins. Conduct in-process inspections to verify adherence to drawings, specifications, and manufacturing plans. Perform final inspection to confirm the product meets customer standards and all certifications/documentation are in place prior to shipment. Maintain and manage inspection fixtures, gauges, and measuring devices to ensure accurate measurements and documentation. Knowledge Base Understanding of steel fabrication processes, including laser cutting, press brake bending, and welding. Knowledge of paint line powder coating processes and cured finish testing. Proficient use of metrology and measurement instruments. Ability to read and interpret production drawings, blueprints, and technical specifications. Education & Experience High School Diploma or GED required; Associate degree preferred. One to three years of related manufacturing or quality inspection experience, or a combination of education and experience. Language Skills Ability to read and interpret technical procedures and business documentation. Capable of preparing written reports and presenting information clearly. Must be bilingual (English/Spanish). Mathematical Skills Ability to apply fractions, percentages, ratios, and proportions to practical manufacturing and measurement scenarios. Reasoning Ability Ability to identify problems, collect data, analyze results, and draw valid conclusions. Capable of interpreting detailed instructions, procedures, and technical documents. #IND-M

Temp To Full-Time Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping. Reject all products and materials that fail to meet quality expectations. Read blueprints, plans, and specifications to understand the requirements of products and services. Measure product dimensions, examine functionality, and compare the final product to the specifications. Recommend improvements to the production process to ensure quality control. Document inspection outcomes by completing detailed reports and performance records. Teach the production team about quality control concerns to improve product excellence. Supervise the production process. Resolve quality-related issues in a timely manner.

Job Description SMS Staffing is Hiring - Quality Control Inspectors! Job Title: Quality Control Inspector Job Type: Temp to Hire Pay: Starting at $18/Hr.+ (based on experience) Shift: 2nd Shift | 4:00 PM - 12:30 AM (Monday - Friday) Job Summary We're looking for detail-oriented inspectors to help maintain product quality. As a Quality Control Inspector, you'll check components, in-process materials, and finished goods, keep accurate inspection records, submit samples to the lab, and report defects. You'll also have the authority to place materials on hold or halt production if needed. Key Responsibilities Inspect materials and products against standards Record inspection and test data Submit samples to the lab Report defects to Production, Shipping, and Quality management Place materials on hold or release as appropriate Halt production or shipment if safety or quality issues arise Maintain a clean and safe work area Follow all safety and food safety policies Requirements High school diploma required; training in industrial quality practices preferred Basic math skills Ability to read and follow job orders and specifications Strong attention to detail Ability to work independently Experience with inspection tools like calipers preferred Physical Demands Frequent standing, walking, bending, kneeling, crouching, and reaching Lift/move items 10-50 lbs regularly Visual acuity for close, distance, color, and depth perception Join the SMS team! It takes more than top-notch facilities, modern equipment, and innovative technologies to become our customers' most trusted supplier. It takes people who are committed to our customers' success and who are willing to go the extra mile to get the job done right. #SMS Powered by JazzHR jgvb QKIpWa

In the Quality Inspector role, you will be responsible for inspection and quality services to ensure company products and processes meet customer, company, and other specification. This role supports company initiatives, provides training and assists the Quality Control Manager. Essential Responsibilities: Comply with all quality, safety, and work rules and regulations. Quality Management: Assure that employees operate consistently within the policies and procedures of VPET USA INC. Evaluate problems and make initial recommendations for possible corrective action to supervisor. Participate in the construction and/or revision of SOPs for the inspection function. Provide support to production team when required. Visually and physically inspects materials, components, subassemblies, assemblies, tools, and final product configuration using blueprints, sketches, engineering drawings, and orders, and other applicable sources to observe, measure, record conformity to customer, regulatory, and company specifications. Records compliance with quality standards to verify that company products and processes meet customer, company, and other specifications. Solves inspection problems; methods-procedures, plans, and details. Audits products and processes to verify system. Maintains necessary inspection logs and writes inspection reports. Communicate quality problems and work with engineering and leads to support, investigate and resolve the quality issues. Perform all other duties as assigned. Minimum Requirements: Ability to manage multiple tasks, set priorities, identify, address problems and meet deadlines. Self-motivated with ability to work independently in a fast-paced environment with changing priorities. Computer skills to include Microsoft programs. Must be able to use computer programs to keep track of administrative tasks such as report writing, analysis of work orders, evaluations, etc. English skills must be proficient to understand, read, write and speak English Ability to work overtime and weekends as required. Must be committed to the success of the entire organization. Physical Requirements: Requirements include, but are not limited to: Must be able to stand and walk for prolonged periods of time. Must be able to lift and carry up to 25 lbs. Must be able to push, pull, twist, climb, balance, stoop, kneel, and crawl. Must be able to perform repetitive motions such as reaching and grasping. Must be able to use a ladder or step ladder. Work environment is in a warehouse and temperatures inside vary between hot or cold based on the outside conditions. This is a fast-paced environment with constantly changing priorities. Education/Experience: High School diploma or equivalent preferred. Minimum of 3 years of experience in a similar role or a combination of experience and education will be considered. Familiar with SQF 2000, HACCP, and GMP preferred. Experience in the plastic bottle industry or in a manufacturing environment is preferred. Competitive Benefits: Medical (HMO), dental and vision insurance premium. 401k plan, Employer contributes 3%, up to 5%. Company offers vacation and sick pay. Holiday Pay: Eight (8) paid holidays per year. Basic Life Insurance Paid (25K policy). We are an Equal Opportunity/ Affirmative Action Employer and do not discriminate against applicants due to veteran status, disability, race, gender, gender identity, sexual orientation or other protected characteristics.

The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. Apply technical knowledge and expertise in determining proper equipment installation and operation. Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards, and technical data. Review and approve locally developed procedures and solutions to complex repair situations. Perform analysis of defects and interprets quality control rejection and failure trends. Monitor safety, training, and certification requirements. Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. Maintain Quality, Safety, Training and Certification Records. Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. Inspect forms and records related to aircraft maintenance. The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. Document maintenance as per Quality Assurance (QA) and established regulatory requirements. Comply with work order timekeeping system procedures. Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. Perform weekly Foreign Object Damage (FOD) walk-downs. Maintain situational awareness, stay cognitive-focused, and mitigate risks. Comply with processes and procedures as per DHS/DOD documents and publications. Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. Perform weekly break room and smoking area cleaning duties. Perform other duties as assigned. Minimum Requirements: Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. High School Diploma or equivalent is required. Five (5) years of experience in aircraft maintenance. Valid Airframe and Power Plant (A&P) License required. Valid FAA Inspection Authorization (IA) required. Ability to obtain a government flight line driver's license. Possess a valid United States driver's license. Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. Ability to read and interpret data is required. Ability to read, write, speak and understand English. Physical Requirements/Working Environment: Capable of performing tasks that frequently require lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. May be required to work night shifts. May work in Aircraft maintenance hangar or outside. Some domestic travel may be required Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.