Quality inspector jobs in Nevada - 77 jobs

Dassault Falcon Jet -Maintenance, Repair and Overhaul (MRO) facility in Reno, Nevada is seeking a full-time Quality Control Inspector who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. Also, providing the approval for return to service with respect to the work performed for work that the Service Center (FAA Certificated Repair Station) is rated. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. Job Duties & Responsibilities: * Responsible to Quality Assurance for quality and airworthiness and may report to Crew Chief for the assignment of aircraft maintenance tasks. * Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. * May travel to locations other than the Repair Station's fixed location to support customer aircraft. * May perform inspections, makes adjustments and repairs, replaces components and corrects any malfunction or deficiency with and without power applied to the aircraft. * May perform repairs on components removed from the aircraft. * May remove and re-install aircraft components to gain access for the performance of assigned tasks. * May troubleshoot (fault isolation) aircraft system malfunction. * May perform basic mechanical and electrical removals and installations. * Documents, records and signs for work performed and/or inspected per RSM/QCM. * Perform other related tasks as assigned by supervision. * May fuel and defuel aircraft. * May perform aircraft line services. * Performs inspection on-site and at off-site locations. * Supports production aircraft under Production Certificate System. * Assists other employees in the performance of their duties within area(s) of qualification. * Is familiar with and adheres to the RSM/QCM and applicable regulations. * Is responsible for and accountable for work performed. Requirements * Possess a Mechanics certificate with Airframe and Power plant ratings. * Minimum 3 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. * Trained in or experience with the methods, techniques, practices, aids, equipment and tools used to perform aircraft maintenance and alterations. * Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment and tools appropriate for the work being performed and approved for return to service. * Able to work unsupervised for extended periods. * Excellent written and verbal communications skills. * Can Do attitude - highly motivated, * Demonstrate excellent customer service skills/ * Team player that exhibits and models Dassault Falcon Jet core values and attributes. * Repair Station Training * Applicable Airframe Initial Training * Applicable Engine Training * Applicable Avionics Systems Training * RVSM Training * FAR 91.411/FAR 91.413 Training * Human Factors Training Compensation and Benefits The compensation for this position typically falls between $38 - $50 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime. This position may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

@HYVE Solutions, missions to help customers, business partners, and employees achieve success through shared goals, strategies, resources and technology solutions. @ HYVE Solutions, we believe employees are our greatest asset and we empower them to make a difference in our business. Diversity and inclusion make us all better. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

At Nox Group, we are dedicated to humanizing construction! Our enterprise owns and operates Corbins, RMCI, Nox Innovations, and Construction Labels. Our teammates, partners, and customers can expect that we genuinely care to serve them and look out for their best interests. As one of the fastest-growing industrial construction enterprises in the US and an industry leader in data centers, manufacturing, semiconductor, and water/wastewater treatment facilities, we continually look for people who are excited about personal growth and can contribute to our mission of being empowered thought leaders boldly changing the construction industry. We are currently seeking a Quality Technician to support our QAQC Department team in Reno, Nevada. As a Quality Technician, you will play an essential role in ensuring our installations comply with National and City codes, customer design specifications, and Corbins' expectation of “First Class Work”. You will be supporting the most challenging and exciting projects in the Southwest, including commercial, industrial, mission-critical and water/wastewater treatment facilities. Responsibilities Develop an understanding of the electrical project scope, quality requirements, quality plan, and quality documents pertaining to the assigned scope of work including applicable codes and standards. Coordinate with operations to schedule and perform quality inspections and tests to maintain production goals. Prepare inspection/test reports and maintain the quality files related to area of responsibility. Verify inspection and test compliance with applicable contract documents, codes, and standards. Correctly interpret and utilize codes and industry standards to determine compliance of the work. Assist the project team with completion of required test documentation. Organize quality documents and store per the company and project document management procedures. Identify, report, and correct nonconforming work in accordance with the company quality standards and the Project Quality Plan. Perform receiving inspection of permanent materials and plant equipment for project requirements as needed. Be involved in and provide quality input to task planning meetings. Examine/inspect field conditions and identify problems, inaccuracies, and cost saving measures that arise or that may be encountered. Take corrective actions as needed. Identify safety hazards you or other employees may be subject to and take all necessary corrective actions to eliminate or minimize hazards. Understand and respond appropriately to all safety hazards and warning devices (i.e. back-up alarms, smell of smoke, different colored warning tags, warning sirens) Understand and implement lockout/tagout procedures in safe manner. Qualifications 5+ years working in the industrial electrical industry. Experience maintaining effective communications (both orally and written) with supervisor, coworkers, and the project management team. Experience developing strong working relationship with supervisor, coworkers, and the project management team. Electrical code and standards knowledge Strong attention to detail and follow-through. Proficient in Microsoft Office software (Word, Excel, Outlook) Must be a self-starter, be organized, and have good interpersonal skills. Ability to complete tasks with minimal supervision. Ability to lift up to fifty pounds, unassisted, as required. Ability to work from various heights via ladders, scaffolds, aerial lifts, catwalks and other safe work platforms and area when necessary. Able to work a 40-hour work week, with overtime and off-hour shifts as required. Ability for stand for long periods of time in one place. Ability to walk jobsites throughout the day. Able to work in extreme weather conditions and elements, indoor or outdoor, including heat, cold, rain, mud, dust, and snow depending on the job location. Education/Certifications High school diploma or equivalent. Trade Certificate or college degree in education preferred or equivalent experience in construction training and development. Safety Level This is a safety sensitive position, and all applicable policies including drug test and background check will apply. The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to: Potentially lift up to 50 pounds Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing Potentially operate a motor vehicle, crane, tractor, etc. We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance to the Americans with Disability Act (ADA) It has been and continues to be the long-standing policy of any Nox Group operating company to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. In addition to federal law requirements, Nox Group and all of its subsidiaries comply with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Quality Inspector Job Summary Quality Inspectors perform various sorting, inspection, production, and data capture. Quality Inspectors work in partnership with our customers to contain and improve quality issues the most efficient way possible. Our vision is to be the Leading Global Provider of Premium Inspection and Quality Assurance Services. We create an atmosphere where we recognize the individual, work together to solve problems, and foster an environment for employee growth. Quality Inspectors work in manufacturing plants, warehouses or other locations where our customers parts are being produced or stored. The location may vary day to day depending on the needs of our customers. Teams work collectively to ensure that we are responsive, accountable, and accurate in all aspects of our work. It's important and our people are key to our continued success. Quality Inspector Job Responsibilities & Duties Performs various sorting, inspection, production, and data entry Reads and follows work instructions, work rules and directions Maintains organization and cleanliness of work area Uses inspection, measuring and test equipment as required Completes required training classes Follows all employee policies and other duties as assigned Quality Inspector Job Qualifications & Skills Flexibility and adaptability Positive attitude and self-motivated Detail orientated

Job Description A Step Above Inc. in Las Vegas, NV, is searching for a full-time Roofing Field Coordinator - Quality Control Inspector to join our dedicated team. With a competitive weekly salary of $1,100, you'll be the key connection between shop operations, field technicians, and office staff, ensuring every project runs smoothly. We also offer generous benefits, such as: Health insurance Growth opportunities Collaborative and inclusive work environment ABOUT THIS ROOFING FIELD COORDINATOR - QUALITY CONTROL INSPECTOR JOB You will work full-time, starting bright and early each day. Your mornings will begin at 6:00 AM as you prepare the shop for operations and set the day in motion for our team. The role includes a blend of shop, field, and office activities, offering variety and challenge every day. As a Roofing Field Coordinator - Quality Control Inspector, you will collect and organize critical daily and weekly documentation-such as time sheets, ladder and vehicle inspections, and safety meeting notes-and deliver them to the office as needed. Your day will take you out into the field, driving the company vehicle to active job sites. There, you will thoroughly inspect roof systems, communicate issues and solutions to homeowners, and document your findings with detailed reports and labeled photos for office staff. As you interact with roof technicians, you'll verify the quality of their workmanship, uphold safety and company standards, and report any concerns or updates promptly. Throughout it all, you'll make sure company resources are used responsibly and that all policies are followed. Would you excel in this position? Here's what you need: Valid driver's license Basic understanding of roofing operations or willingness to learn Ability to work independently and manage early-morning responsibilities Professional communication skills for engaging with customers, field staff, and office personnel Strong attention to detail and organizational skills Reliable, punctual, and adaptable to changing operational needs ABOUT US With over 20 years of experience, our skilled team at A Step Above Inc. has built a reputation for completing exceptional, reliable work. Our locally owned and operated company provides top-quality HVAC and roofing services for residential and commercial clients, demonstrating our commitment to professional excellence. We take pride in fostering an innovative, collaborative environment where we work together to achieve incredible results. Our success stems from our talented team members, and we encourage their personal and professional growth. Join us to become part of our dynamic legacy! Apply now using our mobile-friendly application and take the next step in your career as a Roofing Field Coordinator - Quality Control Inspector. Must have the ability to pass a background check and drug screening test.

American Battery Technology Company (ABTC) is an industry-leading battery metals and critical material technology development and commercialization company. Our Pilot Plant just outside of Reno, Nevada will be the first integrated implementation of our multi-step processing train for the full mechanical processing, physical separation, chemical extraction, and production of commercial-scale battery metals that will be resold back into the battery manufacturing supply chain to enact a low-cost, low environmental impact, and domestically sourced closed-loop circular economy. We are seeking a highly motivated and detail-oriented Quality Technician to join our Li-ion battery recycling operation. This critical role reports directly to the Head of Quality and plays a vital part in ensuring the safety, quality, and efficiency of our battery disassembly, processing, and finished product quality. This position is for our D-shift staff, working nights, Thursday through Saturday, and every other Wednesday.

Quality Technician - Food Manufacturing Pay Range: Based on experience Schedule: 2nd Shift - Full-time We are seeking a detail-oriented and dependable Quality Technician to join our team at a food manufacturing facility in Henderson, NV. The Quality Technician is responsible for performing standardized inspections, product testing, and quality checks to ensure all products meet company, state, and federal food safety and quality standards. This role requires accuracy, initiative, and the ability to work both independently and collaboratively in a fast-paced production environment. Key Responsibilities: Conduct routine inspections and testing of raw materials, in-process, and finished goods to ensure compliance with quality and safety standards. Maintain and calibrate testing and measuring equipment. Record and report test results accurately and in a timely manner. Identify and report non-conformances, assisting in root-cause investigations when necessary. Ensure adherence to Good Manufacturing Practices (GMPs) and sanitation standards. Support continuous improvement initiatives and recommend process improvements. Monitor and inspect areas for compliance with sanitation and safety protocols. Complete and maintain inspection forms, logs, and related documentation. Collaborate with production teams to minimize downtime while maintaining quality control. Perform other related duties as assigned. Qualifications: Additional coursework in quality or food science preferred. Minimum 2 years of experience in quality control or production (food manufacturing strongly preferred). Familiarity with GMPs, SOPs, and food safety standards. Strong attention to detail and ability to work with minimal supervision. Basic math and computer skills for data entry and reporting. Ability to lift up to 50 lbs and perform repetitive tasks in a production environment. Must be available to work overnight, rotating, and weekend shifts as required. Bilingual (English/Spanish) a plus. Work Environment: Food manufacturing facility with exposure to allergens (wheat, nuts, coconut, soy products). May require standing, lifting, and walking for extended periods. Must wear appropriate PPE and comply with all FDA, GMP, and OSHA safety standards. Overtime, including weekends, may be required based on production needs. Physical Requirements: Frequent standing, walking, bending, and reaching. Occasional lifting or carrying of up to 50 lbs. Ability to work in varying temperatures and noise levels typical of a production environment.

General Description: The QA/QC Inspector plans and conducts activities concerned with the quality assurance of industrial processes, materials, and products by performing the following duties. The QA/QC Inspector will represent ACCO and its subcontractors for pipe and equipment installation, welding inspection and oversight of subcontractor installation and quality. The QA/QC Inspector will participate in the General Contractors project quality program documenting installation activities. Supervises: None Essential Duties & Responsibilities Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of assigned product or component. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Reviews all purchased products or components and provides input to the decision of whether the product has been vetted by ACCO for future purchases from the vendor. Documents data obtained during all quality assurance activities, consistent with company policies, codes and procedures. Communicates significant issues or developments identified during quality assurance activities and provides recommended process improvements to management. Prepares reports to communicate involvement and results of quality assurance activities. Maintains a working knowledge of codes and specifications for current industry quality standards. The quality team may assign other duties. Secondary Duties / Responsibilities: Develops new approaches to solve problems identified during quality assurance activities. Prepares and presents technical information and reports to team members and management. Directs technical and administrative workers engaged in quality assurance activities. Other duties as assigned by the Site QC Supervisor or QA/QC Director in conjunction with the project team. Position Requirements (Skills, Work Experience, Education, Certifications, Licenses, etc.): To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Seeking at least 5 years of experience in Quality Control with a minimum of 3 years focused on ASME B31 piping codes, industrial and commercial construction, fabrication, welding, non-destructive testing, and/or other similar fields. Current certification in accordance with AWS QC-1 as a Certified Welding Inspector (CWI) and /or ICC Mechanical - Commercial Certification preferred. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to calculate figures and amounts such as proportions, percentages, area, circumference, and volume. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Regular & routine attendance. ACCO Competencies: Proactivity / Initiative: Recognizes what needs to be done and accomplishes it in a manner appropriate for one's level/position and with minimal supervision. Perseverance: Shows the wherewithal to fight for difficult goals despite challenges and to bounce back from adversity. Insight: The ability to gather and make sense of information that suggests new possibilities. Teamwork: The ability to effectively work toward common goals with others by supporting, encouraging, and sharing information in an authentic and approachable manner. Motivation / Dedication: Commits to excellence in pursuing unselfish goals. Initiates action with collective goals takes responsibility and shows personal humility. Technical Curiosity / Willingness to Learn: Interest in seeking out new experiences, knowledge, and candid feed, back; demonstrating an openness to learning and change. Problem-Solver: Ability to identify, analyze, and solve a problem in support of personal, group, department, or organizational objectives. Physical Requirements: (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) Must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds Specific vision abilities required by this job includes Jaeger (J1) vision annually. Regularly required to walk, climb stairs, sit, stoop, kneel, crouch, or crawl Hours: This is a non-exempt position from Monday through Friday, with one-hour break for lunch and two rest breaks. Travel: Based on business needs to and from the primary office to regional branch offices & job sites. Varying work in varying locations.

Trivium Packaging is a global sustainability leader in metal packaging with more than 60 locations worldwide, nearly 8,000 employees, and an annual revenue of approximately €3.0 billion. Trivium serves a diverse range of customers in a variety of end markets such as food, seafood, pet food, nutrition, beauty and personal care, household care, and premium beverages. Trivium wants to shape the industry and has embarked on an ambitious transformation journey. In the near term, focus is on building & upskilling the team, deciding where to play & how to win, and increasing financial performance by executing the Trivium Business System (commercial, operational, and supply chain excellence). Sustainability is embedded in our materials and in our actions. Trivium has ambitious sustainability targets and focuses exclusively on products that are infinitely recyclable. Our company sustainability journey has been awarded with a Platinum medal by EcoVadis, the world's leading rating agent who allocated this award only to the top 1% of the >75000 companies reviewed. Sustainability is embedded in each and every function at Trivium, it‘s in our DNA. The global head office is at Amsterdam Airport; however, many people work in virtual teams from different countries. Our culture is results-driven, entrepreneurial, informal, and highly multicultural. Our people have a high degree of responsibility. Job Summary: Under the direction of the Quality Manager, the Quality Technician (QT) will be an expert in the quality requirements of each production line as well as the quality system (APC). The QT must become fully proficient in understanding the quality standards, policies, APC systems, quality specifications, and ITM's (Information Training methods/SOP's). The QT is responsible for the accuracy and completeness of all quality checks and tests for the quality department as well as the proper reaction to the test results including effectively communicating with the team members, team leader, or manager as applicable. This position monitors and maintains all department equipment in a manner that provides for safe and quality operations. The QT is accountable for the department quality requirements as well as problem solving and training on defects. The QT will be instrumental in communicating, problem solving, analyzing, and reacting to quality problems as they arise. The QT will work closely with the plant management staff, crew team members, and working independently when required. The QT will be a resource for trials, process improvement, and product improvement activities. Job Duties: Maintain safe working environment for team members and equipment. Perform quality checks and inspections per defined standard work. Achieve and sustain competency on all gauges and quality checks. React to the quality check results according to company guidelines. Train all rotating team members on all required quality checks and measurements. Ensure all quality checks are completed and documented correctly as per requirements. Perform test studies and special measurements as required. Attain and sustain good working knowledge of SPC, control charts, ITM's, quality policies, and plant instructions that pertain to quality. Ensure all HFI (Hold for Inspection) on their shift is properly documented and located and provide assistance and guidance to Team Leaders or Supervisors with regards to HFI. Ensure all housekeeping tasks are completed daily, weekly, and as required. Follow 5S standards for the quality lab, and any other plant area as applicable. Assist Operator Technicians and Team Leaders when the line is down as directed. Provide quality guidance and assistance to Team Leaders and Supervisors on off shifts and weekends. Perform duties and tasks as directed by the Quality Manager. Lead the quality department pass down briefings to the oncoming shift. Identify and replenish supplies of test solutions, cross section materials, and other quality consumables. Follow directions of Team Leader and Supervisor on the shift with respect to emergency situations and other critical operational issues. All other duties as assigned. Qualifications and Experience Requirements: Strong written/verbal communication skills Ability to coach, train, mentor, and facilitate job tasks Excellent people skills, high energy and positive cultural fit and attitude Familiarity with Lean manufacturing practices Familiarity with self-directed work team cultures is preferred PREFERRED: Strong quality related background as well as technical background/aptitude Demonstrated attention to detail and ability to react and escalate appropriately Demonstrated ability to troubleshoot and problem solve Demonstrated ability to motivate people and maintain a safe, cohesive work environment. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, behaviors and or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and or Experience: High school diploma or GED required 2+ years experience working High speed manufacturing environment; 5+ preferred Preferred Qualifications: Experience within the metal can & end making industry Basic to intermediate skills with proficiency in all Microsoft Office applications (Word & Excel) Have acceptable attendance record Must demonstrate acceptable attention to detail with respect to documentation and job completion Must demonstrate good self-direction with minimal supervision Must have demonstrated good training and instructional skills. Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually very loud outside of the office/lab area. Employees must wear hearing protection and all other assigned Personal Protective Equipment. Temperature can range from extreme cold (90 degrees). Environment is subject to strong vibrations, and exposure to frequent visual and audible alarms. The atmosphere contains fumes, dust, odors and chemicals used in metal manufacturing process. While performing the duties of this job, the employee is regularly required to stand, walk, and use hands to finger, handle, grip, pull, feel, talk or hear. The employee is frequently required to reach with hands and arms and stoop, kneel, crouch or crawl. The employee will need to work at computer and other electronic screens. The employee must frequently lift and or move up to 30 pounds. Specific vision abilities required by this job include close and distance vision as well as color recognition. Good hand eye coordination is necessary. Ability to work around conveyors and high-speed mechanical equipment in a manufacturing and warehouse environment required. Average hours per week: 40 or 36/48 alternating Usual shift worked is: 8 or 12 hours Stand 90% Sit 10% Walk 90% Lift 30% Squat 20% Crawl 10% Climb 20% Bend (90 degrees) 20% Twist (30 degrees) 50% Reach above shoulders 20% Kneel 20% Work at heights 5-30 ft 20% Work at heights 30+ ft 5% Occasionally 1-33%, frequently 34-66% and continuously 67-100% of the time. This position requires ability to lift: Up to 15 lbs Frequently 16-30 lbs Frequently 31-50 lbs Occasionally 51-75 lbs Occasionally 76-100 lbs Not required Over 100 lbs Not required Must be willing to work all rotating or permanent shifts, including day and night 8 and/or 12 hour shifts, weekends and holidays. BRINGING YOUR TRUE SELF TO WORK To reach our goals, we know we need colleagues at all levels who are truly diverse in every way. That's why we are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status. Our customers come from a wide range of backgrounds, and so do our people and It's business critical for us to ensure all our people have what they need to perform at their best and can be their true selves at work.

At Nox Group, we are dedicated to humanizing construction as one of the fastest-growing industrial enterprises in the US. Nox Group owns and operates Corbins, RMCI, Nox Innovations, and Construction Labels, and our teams set the standard as industry leaders. As we continue to expand our reach nationwide, we seek people who are passionate about personal growth and eager to make a positive impact throughout the industries and communities we serve. We prioritize our people, our partners, and our relationships. Start your journey today and join our skilled team. We are currently seeking a Quality Technician to support our QAQC Department team in Reno, Nevada. As a Quality Technician, you will play an essential role in ensuring our installations comply with National and City codes, customer design specifications, and Corbins' expectation of “First Class Work”. You will be supporting the most challenging and exciting projects in the Southwest, including commercial, industrial, mission-critical and water/wastewater treatment facilities. Responsibilities Develop an understanding of the electrical project scope, quality requirements, quality plan, and quality documents pertaining to the assigned scope of work including applicable codes and standards. Coordinate with operations to schedule and perform quality inspections and tests to maintain production goals. Prepare inspection/test reports and maintain the quality files related to area of responsibility. Verify inspection and test compliance with applicable contract documents, codes, and standards. Correctly interpret and utilize codes and industry standards to determine compliance of the work. Assist the project team with completion of required test documentation. Organize quality documents and store per the company and project document management procedures. Identify, report, and correct nonconforming work in accordance with the company quality standards and the Project Quality Plan. Perform receiving inspection of permanent materials and plant equipment for project requirements as needed. Be involved in and provide quality input to task planning meetings. Examine/inspect field conditions and identify problems, inaccuracies, and cost saving measures that arise or that may be encountered. Take corrective actions as needed. Identify safety hazards you or other employees may be subject to and take all necessary corrective actions to eliminate or minimize hazards. Understand and respond appropriately to all safety hazards and warning devices (i.e. back-up alarms, smell of smoke, different colored warning tags, warning sirens) Understand and implement lockout/tagout procedures in safe manner. Qualifications 5+ years working in the industrial electrical industry. Experience maintaining effective communications (both orally and written) with supervisor, coworkers, and the project management team. Experience developing strong working relationship with supervisor, coworkers, and the project management team. Electrical code and standards knowledge Strong attention to detail and follow-through. Proficient in Microsoft Office software (Word, Excel, Outlook) Must be a self-starter, be organized, and have good interpersonal skills. Ability to complete tasks with minimal supervision. Ability to lift up to fifty pounds, unassisted, as required. Ability to work from various heights via ladders, scaffolds, aerial lifts, catwalks and other safe work platforms and area when necessary. Able to work a 40-hour work week, with overtime and off-hour shifts as required. Ability for stand for long periods of time in one place. Ability to walk jobsites throughout the day. Able to work in extreme weather conditions and elements, indoor or outdoor, including heat, cold, rain, mud, dust, and snow depending on the job location. Education/Certifications High school diploma or equivalent. Trade Certificate or college degree in education preferred or equivalent experience in construction training and development. Safety Level This is a safety sensitive position, and all applicable policies including drug test and background check will apply. The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to: Potentially lift up to 50 pounds Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing Potentially operate a motor vehicle, crane, tractor, etc. We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance to the Americans with Disability Act (ADA) #NXCLIND1 It has been and continues to be the long-standing policy of any Nox Group operating company to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. In addition to federal law requirements, Nox Group and all of its subsidiaries comply with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

The Quality Technician performs quality control tests/inspections on products at various stages of production process. Duties require verbal and written communication ability, visual acuity to product detail, manual coordination to operate hand tools and testing equipment, ability to enter data in computer system and the physical ability to lift various weights. Essential Job Functions Performs quality check of printed, laminated and slit roll samples and pouches on a regular basis to verify Operator's result for dimension. Operates quality control testing equipment/tools. Collects and manages sample retained. Collaborate with Operator and Production Supervisor in ensuring product conformance during job set up for approval to run. Respond and assist Production and/or Quality Supervisor in verifying reported non-conformities for quick resolution or corrective action. Communicate deviation incidents to concerned personnel for corrective action. Place non-conforming raw materials, WIP & Finished products ON HOLD/Quarantine on Radius, update the Quality Log and communicate to concerned personnel. Assist Quality Supervisor in sampling and verification of internally quarantined and customer returned non-conforming materials to identify proper disposition. Generates and issues Certificate of Analysis directly to customer or save in the system. Communicates discrepancies of production documentations (WI, SOP, Layout, etc.) to Management and CSR for timely correction. Prints quality forms for production personnel if needed. Read and replies to e-mails in timely manner. Cooperate in the maintenance, cleanliness and organization of the Laboratory. Cooperate during root cause analysis to identify proper corrective & preventive action. Assist in collection, preparation and review of customer required samples. Perform filing of quality documents/records. Assist with team members with their responsibilities as needed or during their absence. Attend team meetings and feedback on any quality related issues/improvements. Assist in employee trainings, if required. Follow all established safety rules and regulations and utilize required safety equipment. Report defective equipment or unsafe conditions to the appropriate personnel. Maintain work area in a clean and orderly condition. Follow all company Good Manufacturing Practices & Policies. Perform other duties as required or as requested by Supervisor or Manager. Ability to work a flexible schedule if needed. Ability to collaborate and maintain Garlock's commitment to a Food Safe environment. Skills and Knowledge Technical or vocational degree is a plus. Able to consistently act independently and prioritize work. Practical interpersonal and written communication skills Experience with ERP and other Maintenance Planning tools. Strong analytical and problem-solving skills Strong sense of ownership, work ethic, good judgment, and decision-making skills Familiar with Microsoft Office (Word, and Excel). Able to work in a fast-paced environment and multi-task effectively. Excellent organizational and prioritization skills. Excited about taking on new challenges in the manufacturing industry Self-motivated, hands-on, practical mindset, and capable of setting and reaching ambitious goals. Ability to work as part of a team and independently. Ability to collaborate and maintain Garlock's commitment to a Food Safe environment. Physical Requirements: While performing the duties of this job, the employee is regularly required to stand, walk, sit, and use hands to handle or feel. The employee frequently is required to talk or hear. The employee is occasionally required to reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The noise level in the work environment is usually loud. Period lifting of pallets weight and material weighing up to 50lbs Squatting, crouching, turning, twisting, stretching, climbing steps, grabbing, pulling, pushing, and bending. Visual and hearing acuity within normal limits Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Typical environment of manufacturing and production facilities. Exposure includes but is not limited to continuous noise, scent of materials, bright workstations, machinery with moving parts. Other Details: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This company is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. It is the responsibility of all Employees to ensure that the product produced by Garlock Flexibles meets or exceeds the expectations for quality of Garlock Flexibles and their Customers. It is also the responsibility of all employees to ensure that the Hygiene of their work area meets or exceeds the standards set in Garlock Flexibles Good Manufacturing Practices Manual. 3rd Shift Sun-Thurs 11pm-7am 40 hours a week/Overtime as needed

DHL Supply Chain is Hiring! At DHL, you will play a part in one of the world's most essential industries. There has never been a better time to join DHL Supply Chain. In a global business like ours, the opportunities are endless. So, join us. Work with us. Grow with us. The core responsibilities of this role include: Supply Chain, Quality Control, Auditing, Product Compliance, Material or Product Inspection Position: First (1st) Shift Quality Technician I Shift: Monday-Friday AM Shift Hours TBD Pay: $22.25 In addition to the general job description below, the ideal candidate will also possess the following skills and/or experience: A minimum of 1-3 years' experience in the following: * Ensure accurate checking, inspecting and/or counting of all products for both inbound and outbound departments and ensuring all product is free of damage or defect. * Auditing product and packaging/labeling to maintain highest level of product compliance and accuracy * Ensure the quantity, quality, labeling, and shipping address of orders correspond to customer specifications or other requirements. * MUSThave experience using SAP and Manhattan commercial WMS (warehouse management system) software. * Microsoft Office software, including Excel. Be part of the world's largest logistics company! DHL Supply Chain has been certified as a Great Place to Work in the US and Canada! Our excellent benefits packages includes: * Affordable medical, dental, and vision coverage available beginning on your 30thday * PTO program for all associates, including paid holidays and vacation * 401(k) with generous company match * Tuition reimbursement program * Excellent training and career advancement opportunities Grow your skills. Shape your world. Role Purpose: Provide leadership, training, support and disciplines for establishment, maintenance, alignment and continual improvement of the QA System. Responsible for day-to-day Quality Assurance activities to ensure compliance with governmental regulations, customer requirements, quality assurance policies and procedures and accommodating requests for support. Leads QA team. Assigns QA team work schedules, directs team, trains associates in required QA processes and monitor's associates' compliance and progress. Key Accountabilities: * Monitor and report level of QMS implementation, compliance and effectiveness through audit activities, observation, review of quality metrics and customer feedback. * Facilitate QA training for new and existing associates. * Review documents and instruction prepared by members of the work group for accuracy and legibility. * Work with Quality Assurance, Ops Performance and Process Improvement teams to progress Quality initiatives. Incorporate QA, OP and PIM tools and methodologies, as appropriate, in performance of tasks. * Recommends appropriate methods for supporting the site operations' requirements for quality assurance compliance. * Lead/support coordination of QA license, permit and registration activities and provide direction for compliance with FDA, DEA, ATF, State and other similar regulatory requirements. * Perform daily quality assurance activities as required or directed by management. * Lead and facilitate development of QMS documentation. Required Education and Experience: * High School Diploma or Equivalent * Forklift operator certificate or satisfactory completion of a forklift-training program within the first 30 days of employment * Associate degree or equivalent in related field of study, preferred Our Organization is an equal opportunity employer. #LI-Onsite #LI-DNI ","title

**Job Title: QC Inspector** **About the Role** Are you detail-oriented and passionate about quality? As a **QC Inspector** , you'll play a critical role in ensuring the integrity and performance of our electronic products. You'll inspect circuit boards and small electrical components using advanced tools and techniques, helping us maintain the highest standards of quality and reliability. This is more than just a job-it's a chance to be part of a collaborative team that values precision, innovation, and continuous improvement. We are currently hiring for both **day and swing shifts** , offering flexibility to fit your lifestyle. **Key Responsibilities** + Perform **visual and mechanical inspections** of components and finished products. + Utilize tools such as **microscopes, calipers, x-ray systems, and vision systems** to verify product specifications. + Accurately **document inspection results** and report non-conformances. + Collaborate with **production and engineering teams** to resolve quality issues and improve processes. + Maintain a **clean, organized, and safe work environment** in compliance with company standards. + Follow **standard operating procedures (SOPs)** and quality control guidelines. + Meet **daily production targets** and support throughput goals. + Participate in training programs covering **ESD, safety, first article inspection, IPC-A-610 standards** , and more. **What You Bring** + Proven experience in **quality control and assurance** within a manufacturing setting. + Proficiency in **inspection techniques** and use of measurement tools. + Ability to **read and interpret blueprints, drawings, and bills of materials** . + Strong **attention to detail** and commitment to accuracy. + Basic **computer skills** and ability to document findings clearly. + Effective **communication skills** in English (written and verbal). + Experience with **microscope-based visual inspections** . **Why Join Us?** + Be part of a **supportive and skilled team** that values your contributions. + Work in a **clean, safe, and well-equipped facility** with cutting-edge tools. + Enjoy **opportunities for professional growth** , training, and advancement. + Make a real impact by helping deliver **high-quality products** to global customers. + Choose a shift that fits your schedule- **day and swing shifts available** . **Work Environment** You'll thrive in a fast-paced, hands-on manufacturing environment where safety, precision, and teamwork are key. Our culture encourages continuous learning and improvement, and we're committed to helping you succeed. **Job Type & Location** This is a Contract to Hire position based out of Carson City, NV. **Pay and Benefits** The pay range for this position is $20.00 - $21.50/hr. **Workplace Type** This is a fully onsite position in Carson City,NV. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

As a QC Inspector at Rocket EMS, you will play a vital role in ensuring that our high-reliability PCB assemblies adhere to the strictest quality standards. Your responsibilities will include conducting first article inspections, performing in-process audits, and monitoring production quality along the SMT line. This position demands meticulous attention to detail, a solid understanding of IPC standards, and the decisiveness to halt production when quality is jeopardized. Responsibilities Review job documentation (MPI, Deviations, ECOs, and Customer Requirements) prior to inspection. Conduct SMT First Article Inspections and verify compliance with IPC-A-610 (Class 2 and 3) and customer standards. Monitor throughput and quality on assigned lines; halt production if significant defects are identified and escalate issues promptly. Provide daily quality pass-down reports and keep leads/supervisors informed about inspection outcomes. Initiate and review Technical Inquiries for discrepancies; ensure no jobs commence without proper authorization. Assist in addressing bottleneck areas as directed by Supervisor, Engineer, or Manager. Escalate unresolved issues to the Quality Manager. Adhere to and enforce all procedures related to ESD, MSD handling, housekeeping, maintenance, safety, and inspection protocols. Propose and support continuous process and quality improvements. Qualifications Education High school diploma or equivalent (required). Experience Minimum of 2 years in an electronics inspection role within a contract manufacturing or similar environment. IPC-A-610 and/or J-STD-001 certification (required). Skills Strong understanding of IPC workmanship standards (Class 2 and 3). Ability to read and interpret blueprints, drawings, and BOMs. Basic computer skills (MS Word, Excel, Outlook). Excellent communication skills in English, both written and verbal. Detail-oriented with the capability to accurately identify and classify defects. Benefits 401(k) with company match Medical, dental, vision, and life insurance Paid time off Growth opportunities in a cutting-edge electronics manufacturing environment Schedule 8-hour shift, Monday-Friday Overtime and weekends as needed

For nearly 70 years, MasterBrand has been a leader in shaping environments where people gather, enriching lives, and creating lasting memories. As the number one North American residential cabinet business, we take pride in our stylish products, expansive network, and dedicated associates. Join us as an intern and embark on a journey where you'll face authentic business challenges, craft scalable solutions, and make a real impact. Job Description The Quality Tech - Supplier Quality position is the lead point-of-contact between the DA operations team and our vendors/ suppliers, and is responsible for overall performance and improvements in supplier quality and material quality. This position works within the Distributive Assembly (DA) and Riverside Quality System, and uses root cause analysis techniques, and trend/ statistical analysis to assist in the continual improvement of the DA's manufacturing processes. This individual will also assist in solving problems, controlling variables, and providing candid & accurate feedback that are critical to quality. They will be expected to lead continuous improvement activities and teams focused on improving material quality within the DA. Organizational Relationship: This position will report to the Quality Manager as a member of the Continuous Improvement and Quality Department. Accountabilities: Request, coordinate and track through completion vendor corrective actions Develop new metrics and processes to improve material quality (for example: First Pass Yield) Able to access and interpret technical drawings and blueprints Able to complete and publish End-of-Month Vendor Scrap Reports Audit incoming and in-process pallets for non-conforming material Audit current processes for identification of defects in material goods and process execution Coordinate processing of non-conforming material into quarantine receiving “red zone” and/or vendor scrap area Maintain accountability over quarantined material and expedite disposition through vendors Actively participate in Process, Shipping and Out-of-Box Audits and work towards resolution of open items Interacts with Leadership in the identification and resolution of product quality problems Frequently interacts with internal and external customers to resolve quality problems Coordinate return of defective material to vendors with Materials/Supply group Audit and evaluate pallets of non-conforming material and reconcile discrepancies between actual inventory and tally report sheets Capture defect data, analyze, and identify/communicate trends with recommended countermeasures for resolution. Coach employees on proper processing of “scrap” materials and with proper repair techniques Periodically review specifications and Standard Operating Sheets (SOS) etc. for accuracy and revisions Support Riverside DA employees and Leadership as needed to interpret specifications and solve problems Assist with creating quality standards and visual aids, and training associates on their intended use Participate in Kaizen improvement events, especially those focused on quality Generate, modify, and complete Standard Operating Sheets (SOS) Support Annual Physical Inventories Support root cause investigations in collaboration with Quality Technician. Perform Pick Cart Audits Review and respond to Hour By Hour Supplier related defects being reported. Knowledge, Skills and Experience: Excellent written and oral communications skills Skilled in Microsoft Office required (Word, Excel, and PowerPoint), with expertise in Excel preferred Ability to apply and interpret basic statistical data Must be detail-oriented with the ability to discern colors and see defects from arm's length away Must have the ability to actively initiate, lead, and participate in problem solving activities as they pertain to supplier quality issues Must be able to give candid feedback and report findings of non-compliance to the Riverside Quality System Ability to maintain the professional competence, knowledge, and skill necessary for the satisfactory performance of all assigned responsibilities Able to work under normal supervision and self-pace as required Willing to perform basic 5S (housekeeping/organization) steps and maintain the vendor scrap area and vendor scrap work cell Two years' experience within a manufacturing environment preferred One year of demonstrated exceptional individual performance, and/or one year of quality assurance/control desired Must be willing to hold self and others accountable to safety and quality policies and procedures Physical Requirements Possess manual dexterity to perform detailed cosmetic repairs to cabinet components by hand Individual and team-lifting as appropriate Safely perform stacking and down-stacking of various cabinet components to process and quarantine non-conforming material A combination of bending, reaching, squatting/stooping, standing and walking for up to nine hours per day The ability to operate a manual pallet jack The ability to work safely and wear proper PPE, which includes, but is not limited to: Safety glasses, ear plugs, task-specific gloves, bump cap or hardhat, and steel toed safety shoes The ability to work in a hot and/or dusty environment SHIFTS: 1st shift hours: Monday - Thursday 5:30 AM - 4:00 PM, You will normally work this shift, however may need to work on Fridays based on company needs. BENEFITS Insurance coverage including medical, dental, vision, life insurance, flexible spending accounts, wellness programs, 401K all effective day 1 of employment, plus generous PTO and holidays Associate appreciation/recognition programs Scholarship program for children of employees Other benefits offered are dependent upon plant location, please check with HR for details Qualifications Education: High school diploma or GED equivalent is minimally required Must be a team player with strong written and verbal communication skills Must have the ability to actively initiate lead and participate in problem solving activities Minimum 3 years' experience in a manufacturing setting preferred Additional Information Equal Employment Opportunity MasterBrand Cabinets LLC is an equal-opportunity employer. MasterBrand Cabinets LLC's policy is not to discriminate against any applicant or employee based on race, color, religion, sex, gender identity or expression, national origin, ancestry, age, disability/handicap status, marital status, military status, sexual orientation, genetic history or information, or any other basis protected by applicable federal, state or local laws. MasterBrand Cabinets LLC also prohibits harassment of applicants or employees based on any of these protected categories. It is also MasterBrand Cabinets LLC's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Reasonable Accommodations MasterBrand Cabinets LLC is committed to working with and providing reasonable accommodations to individuals with disabilities. If you have a disability and wish to discuss potential accommodations related to applying for employment, please contact us at [email protected].

Job Description American Battery Technology Company (ABTC) is an industry-leading battery metals and critical material technology development and commercialization company. Our Pilot Plant just outside of Reno, Nevada will be the first integrated implementation of our multi-step processing train for the full mechanical processing, physical separation, chemical extraction, and production of commercial-scale battery metals that will be resold back into the battery manufacturing supply chain to enact a low-cost, low environmental impact, and domestically sourced closed-loop circular economy. We are seeking a highly motivated and detail-oriented Quality Technician to join our Li-ion battery recycling operation. This critical role reports directly to the Head of Quality and plays a vital part in ensuring the safety, quality, and efficiency of our battery disassembly, processing, and finished product quality. This position is for our D-shift staff, working nights, Thursday through Saturday, and every other Wednesday. Requirements Experience: Proven professional experience (2+ years) in a quality control, technician, or related technical role, preferably within a manufacturing, recycling, or complex technical environment. Battery Expertise: Direct hands-on experience with Li-ion battery technology, including familiarity with common battery pack and module architectures. Mechanical Fluency: Demonstrated mechanical aptitude and proficiency in using a variety of hand tools for precise disassembly, inspection, and maintenance tasks. Documentation & Communication: Excellent written communication skills, with experience in technical writing, including the creation and maintenance of SOPs, work instructions, and quality reports. Attention to Detail: Meticulous approach to recording data, performing inspections, and accurately executing product sampling protocols. Responsibilities In-Process Quality Control & Sampling: Execute routine sampling and testing of recycled products (e.g., black mass, metal fractions) generated by the recycling operation multiple times per day. Document and report all test results, non-conformances, and material inconsistencies accurately. Disassembly Inspection & Assurance: Conduct in-depth mechanical disassembly and inspection of battery packs and modules, requiring proficient use of various hand and power tools (e.g., wrenches, sockets, multimeters). Perform visual, dimensional, and functional quality inspections on incoming Li-ion battery packs and modules to ensure non-conforming material does not enter our recycling process. Work closely with production personnel during the disassembly process to verify adherence to quality and safety standards. Procedure Development & Documentation: Collaborate with production and engineering teams to develop and write clear, concise Standard Operating Procedures (SOPs) for safe Li-ion battery disassembly and initial processing steps. Maintain and update quality records, inspection logs, and documentation systems in compliance with quality management standards. Safety & Compliance: Support and enforce strict adherence to quality management systems and internal safety standards. Crucially, a strong preference will be given to candidates with knowledge of Li-ion battery electrical safety protocols and high-voltage handling best practices. Nice-to-Have Knowledge of high-voltage electrical safety standards and procedures relevant to Li-ion batteries (e.g., NFPA 70E, OSHA guidelines). Experience utilizing analytical equipment for material testing or quality assurance in a manufacturing or recycling environment. Relevant technical certification or associate's degree (e.g., Electrical Technology, Mechanical Technology, or Quality Assurance). Benefits Competitive Pay Company-sponsored health, dental, vision, and life insurance Parental Leave Company-sponsored Employee Assistance Program Stock options 401(K) Paid time off Monthly phone stipend Equal Opportunity Employer American Battery Technology Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Americans With Disabilities Act American Battery Technology Company does not discriminate based upon disability in its hiring or employment practices and complies with the ADA title I employment regulations. If you need assistance or an accommodation due to a disability or a special need, please contact Human Resources.

The Quality Technician performs quality control tests/inspections on products at various stages of production process. Duties require verbal and written communication ability, visual acuity to product detail, manual coordination to operate hand tools and testing equipment, ability to enter data in computer system and the physical ability to lift various weights. Essential Job Functions Performs quality check of printed, laminated and slit roll samples and pouches on a regular basis to verify Operator's result for dimension. Operates quality control testing equipment/tools. Collects and manages sample retained. Collaborate with Operator and Production Supervisor in ensuring product conformance during job set up for approval to run. Respond and assist Production and/or Quality Supervisor in verifying reported non-conformities for quick resolution or corrective action. Communicate deviation incidents to concerned personnel for corrective action. Place non-conforming raw materials, WIP & Finished products ON HOLD/Quarantine on Radius, update the Quality Log and communicate to concerned personnel. Assist Quality Supervisor in sampling and verification of internally quarantined and customer returned non-conforming materials to identify proper disposition. Generates and issues Certificate of Analysis directly to customer or save in the system. Communicates discrepancies of production documentations (WI, SOP, Layout, etc.) to Management and CSR for timely correction. Prints quality forms for production personnel if needed. Read and replies to e-mails in timely manner. Cooperate in the maintenance, cleanliness and organization of the Laboratory. Cooperate during root cause analysis to identify proper corrective & preventive action. Assist in collection, preparation and review of customer required samples. Perform filing of quality documents/records. Assist with team members with their responsibilities as needed or during their absence. Attend team meetings and feedback on any quality related issues/improvements. Assist in employee trainings, if required. Follow all established safety rules and regulations and utilize required safety equipment. Report defective equipment or unsafe conditions to the appropriate personnel. Maintain work area in a clean and orderly condition. Follow all company Good Manufacturing Practices & Policies. Perform other duties as required or as requested by Supervisor or Manager. Ability to work a flexible schedule if needed. Ability to collaborate and maintain Garlock's commitment to a Food Safe environment. Skills and Knowledge Technical or vocational degree is a plus. Able to consistently act independently and prioritize work. Practical interpersonal and written communication skills Experience with ERP and other Maintenance Planning tools. Strong analytical and problem-solving skills Strong sense of ownership, work ethic, good judgment, and decision-making skills Familiar with Microsoft Office (Word, and Excel). Able to work in a fast-paced environment and multi-task effectively. Excellent organizational and prioritization skills. Excited about taking on new challenges in the manufacturing industry Self-motivated, hands-on, practical mindset, and capable of setting and reaching ambitious goals. Ability to work as part of a team and independently. Ability to collaborate and maintain Garlock's commitment to a Food Safe environment. Physical Requirements: While performing the duties of this job, the employee is regularly required to stand, walk, sit, and use hands to handle or feel. The employee frequently is required to talk or hear. The employee is occasionally required to reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The noise level in the work environment is usually loud. Period lifting of pallets weight and material weighing up to 50lbs Squatting, crouching, turning, twisting, stretching, climbing steps, grabbing, pulling, pushing, and bending. Visual and hearing acuity within normal limits Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Typical environment of manufacturing and production facilities. Exposure includes but is not limited to continuous noise, scent of materials, bright workstations, machinery with moving parts. Other Details: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This company is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. It is the responsibility of all Employees to ensure that the product produced by Garlock Flexibles meets or exceeds the expectations for quality of Garlock Flexibles and their Customers. It is also the responsibility of all employees to ensure that the Hygiene of their work area meets or exceeds the standards set in Garlock Flexibles Good Manufacturing Practices Manual. 3rd Shift Sun-Thurs 11pm-7am 40 hours a week/Overtime as needed

Job Description As a QC Inspector at Rocket EMS, you will play a vital role in ensuring that our high-reliability PCB assemblies adhere to the strictest quality standards. Your responsibilities will include conducting first article inspections, performing in-process audits, and monitoring production quality along the SMT line. This position demands meticulous attention to detail, a solid understanding of IPC standards, and the decisiveness to halt production when quality is jeopardized. Responsibilities Review job documentation (MPI, Deviations, ECOs, and Customer Requirements) prior to inspection. Conduct SMT First Article Inspections and verify compliance with IPC-A-610 (Class 2 and 3) and customer standards. Monitor throughput and quality on assigned lines; halt production if significant defects are identified and escalate issues promptly. Provide daily quality pass-down reports and keep leads/supervisors informed about inspection outcomes. Initiate and review Technical Inquiries for discrepancies; ensure no jobs commence without proper authorization. Assist in addressing bottleneck areas as directed by Supervisor, Engineer, or Manager. Escalate unresolved issues to the Quality Manager. Adhere to and enforce all procedures related to ESD, MSD handling, housekeeping, maintenance, safety, and inspection protocols. Propose and support continuous process and quality improvements. Qualifications Education High school diploma or equivalent (required). Experience Minimum of 2 years in an electronics inspection role within a contract manufacturing or similar environment. IPC-A-610 and/or J-STD-001 certification (required). Skills Strong understanding of IPC workmanship standards (Class 2 and 3). Ability to read and interpret blueprints, drawings, and BOMs. Basic computer skills (MS Word, Excel, Outlook). Excellent communication skills in English, both written and verbal. Detail-oriented with the capability to accurately identify and classify defects. Benefits 401(k) with company match Medical, dental, vision, and life insurance Paid time off Growth opportunities in a cutting-edge electronics manufacturing environment Schedule 8-hour shift, Monday-Friday Overtime and weekends as needed

For nearly 70 years, MasterBrand has been a leader in shaping environments where people gather, enriching lives, and creating lasting memories. As the number one North American residential cabinet business, we take pride in our stylish products, expansive network, and dedicated associates. Join us as an intern and embark on a journey where you'll face authentic business challenges, craft scalable solutions, and make a real impact. Job Description The Quality Tech - Supplier Quality position is the lead point-of-contact between the DA operations team and our vendors/ suppliers, and is responsible for overall performance and improvements in supplier quality and material quality. This position works within the Distributive Assembly (DA) and Riverside Quality System, and uses root cause analysis techniques, and trend/ statistical analysis to assist in the continual improvement of the DA's manufacturing processes. This individual will also assist in solving problems, controlling variables, and providing candid & accurate feedback that are critical to quality. They will be expected to lead continuous improvement activities and teams focused on improving material quality within the DA. Organizational Relationship: This position will report to the Quality Manager as a member of the Continuous Improvement and Quality Department. Accountabilities: * Request, coordinate and track through completion vendor corrective actions * Develop new metrics and processes to improve material quality (for example: First Pass Yield) * Able to access and interpret technical drawings and blueprints * Able to complete and publish End-of-Month Vendor Scrap Reports * Audit incoming and in-process pallets for non-conforming material * Audit current processes for identification of defects in material goods and process execution * Coordinate processing of non-conforming material into quarantine receiving "red zone" and/or vendor scrap area * Maintain accountability over quarantined material and expedite disposition through vendors * Actively participate in Process, Shipping and Out-of-Box Audits and work towards resolution of open items * Interacts with Leadership in the identification and resolution of product quality problems * Frequently interacts with internal and external customers to resolve quality problems * Coordinate return of defective material to vendors with Materials/Supply group * Audit and evaluate pallets of non-conforming material and reconcile discrepancies between actual inventory and tally report sheets * Capture defect data, analyze, and identify/communicate trends with recommended countermeasures for resolution. * Coach employees on proper processing of "scrap" materials and with proper repair techniques * Periodically review specifications and Standard Operating Sheets (SOS) etc. for accuracy and revisions * Support Riverside DA employees and Leadership as needed to interpret specifications and solve problems * Assist with creating quality standards and visual aids, and training associates on their intended use * Participate in Kaizen improvement events, especially those focused on quality * Generate, modify, and complete Standard Operating Sheets (SOS) * Support Annual Physical Inventories * Support root cause investigations in collaboration with Quality Technician. * Perform Pick Cart Audits * Review and respond to Hour By Hour Supplier related defects being reported. Knowledge, Skills and Experience: * Excellent written and oral communications skills * Skilled in Microsoft Office required (Word, Excel, and PowerPoint), with expertise in Excel preferred * Ability to apply and interpret basic statistical data * Must be detail-oriented with the ability to discern colors and see defects from arm's length away * Must have the ability to actively initiate, lead, and participate in problem solving activities as they pertain to supplier quality issues * Must be able to give candid feedback and report findings of non-compliance to the Riverside Quality System * Ability to maintain the professional competence, knowledge, and skill necessary for the satisfactory performance of all assigned responsibilities * Able to work under normal supervision and self-pace as required * Willing to perform basic 5S (housekeeping/organization) steps and maintain the vendor scrap area and vendor scrap work cell * Two years' experience within a manufacturing environment preferred * One year of demonstrated exceptional individual performance, and/or one year of quality assurance/control desired * Must be willing to hold self and others accountable to safety and quality policies and procedures Physical Requirements * Possess manual dexterity to perform detailed cosmetic repairs to cabinet components by hand * Individual and team-lifting as appropriate * Safely perform stacking and down-stacking of various cabinet components to process and quarantine non-conforming material * A combination of bending, reaching, squatting/stooping, standing and walking for up to nine hours per day * The ability to operate a manual pallet jack * The ability to work safely and wear proper PPE, which includes, but is not limited to: Safety glasses, ear plugs, task-specific gloves, bump cap or hardhat, and steel toed safety shoes * The ability to work in a hot and/or dusty environment SHIFTS: * 1st shift hours: Monday - Thursday 5:30 AM - 4:00 PM, You will normally work this shift, however may need to work on Fridays based on company needs. BENEFITS * Insurance coverage including medical, dental, vision, life insurance, flexible spending accounts, wellness programs, 401K all effective day 1 of employment, plus generous PTO and holidays * Associate appreciation/recognition programs * Scholarship program for children of employees * Other benefits offered are dependent upon plant location, please check with HR for details Qualifications Education: * High school diploma or GED equivalent is minimally required * Must be a team player with strong written and verbal communication skills * Must have the ability to actively initiate lead and participate in problem solving activities * Minimum 3 years' experience in a manufacturing setting preferred Additional Information Equal Employment Opportunity MasterBrand Cabinets LLC is an equal-opportunity employer. MasterBrand Cabinets LLC's policy is not to discriminate against any applicant or employee based on race, color, religion, sex, gender identity or expression, national origin, ancestry, age, disability/handicap status, marital status, military status, sexual orientation, genetic history or information, or any other basis protected by applicable federal, state or local laws. MasterBrand Cabinets LLC also prohibits harassment of applicants or employees based on any of these protected categories. It is also MasterBrand Cabinets LLC's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Reasonable Accommodations MasterBrand Cabinets LLC is committed to working with and providing reasonable accommodations to individuals with disabilities. If you have a disability and wish to discuss potential accommodations related to applying for employment, please contact us at ************************.