Quality inspector jobs in North Carolina - 439 jobs

Job Title: QC Environmental Monitoring Technician Department: Quality Control Pay: $25-$30/hr The QC Environmental Monitoring Technician supports parenteral manufacturing operations by performing routine environmental monitoring of classified manufacturing areas and conducting clean utility sampling and analysis across manufacturing and QC laboratory facilities. This role is essential in ensuring compliance with cGMP requirements and maintaining a controlled manufacturing environment to support the production of safe, high-quality pharmaceutical products. Key Responsibilities Adhere to and promote compliance with cGMP regulations, Quality Systems, and Good Documentation Practices (GDP). Perform routine environmental monitoring of classified manufacturing areas in support of both routine operations and Environmental Monitoring Performance Qualification (EMPQ) activities. Conduct clean utility sampling and analysis, including: Compressed air Potable water Purified water Water for Injection (WFI) Clean steam Support manufacturing and QC laboratory operations by providing accurate and timely environmental monitoring data. Enumerate, review, and document environmental monitoring results using LIMS or other laboratory data systems. Perform Second Person Verification (SPV) of environmental monitoring data on a routine basis. Participate in continuous improvement initiatives and quality-focused projects. Assist in the development, revision, and maintenance of SOPs and Work Instructions as needed. Adhere to and promote compliance with all site safety policies and procedures. Minimum Qualifications High School Diploma or equivalent required; Associate degree preferred. Minimum of 2 years of experience performing Environmental Monitoring in a GMP-regulated pharmaceutical manufacturing environment. Prior experience supporting aseptic or parenteral manufacturing operations strongly preferred. Hands-on experience with environmental monitoring techniques, including: Viable surface monitoring Viable air monitoring Non-viable air monitoring Compressed air sampling Water and clean utility sampling and analysis Experience working with laboratory systems such as LIMS, LES, and/or MODA. Preferred Qualifications Strong understanding of cGMP regulations and regulatory compliance expectations. Experience performing environmental monitoring within filling isolators or Restricted Access Barrier Systems (RABS). Ability to train and mentor junior Environmental Monitoring Technicians. Strong written and verbal communication skills. Proven ability to collaborate effectively in a cross-functional team environment. Physical & Work Environment Requirements Ability to work in laboratory and cleanroom environments while wearing appropriate PPE. Ability to gown into facility-specific cleanroom attire. Ability to stand or walk for extended periods and perform repetitive tasks. Ability to lift, push, pull, and carry up to 30 pounds. Work Schedule & Travel Ability to work 12-hour shifts. Flexibility to work day or night shifts, particularly during training and startup phases. This role may initially support project/startup activities and transition into a routine operational support position.

Founded in 1992, InServ is a full-service industrial contractor working in the life science, advanced manufacturing, and food and beverage industries. We specialize in four trades (mechanical, hygienic piping, HVAC, and electrical, instrumentation and controls), working from multiple locations across North Carolina and for clients across the Southeast. InServ is both a knowledgeable and reliable partner for our clients. We assist with design, adhere to schedules, and execute with the highest quality to provide a total solution. ESSENTIAL DUTIES AND RESPONSIBILITIES: Conduct daily walk-through surveillances on assigned project(s) and/or fabrication facilities. Evaluate to ensure conformance and compliance with contractual specifications, government regulations, and InServ's QA/QC policies and procedures. Inspect materials and fabricated products, on-site materials/equipment, and verify installation processes to ensure compliance with contract specifications and regulatory standards. Document and communicate inspection results. Identify and recommend solutions for non-conforming items and nonconformance of QA/QC policies and procedures. Follow-through to ensure nonconformances are resolved. Disseminate written policies and procedures related to compliance activities. Interpret specifications and clarify procedural issues for workers. Verify that all contractual and regulatory policies and procedures have been documented, implemented, and communicated for the project, and as directed by QA/QC Manager or Supervisor. Assess product for compliance to specifications and procedures. Assist with the development of risk management strategies. Contribute to suggestions for improvements in communication and monitoring. Maintain daily logs of project quality and surveillances. Support logged information with photographs/videos - photographing must be in accordance with client's privacy policies. File appropriate and timely inspection and compliance reports. Updated: 1/31/25 JD-QA/QC Inspector: Page 2 of 2 Discuss violations of QA/QC policies and/or specifications for potential stop-work orders with the QA/QC Manager and project management. Explain specifications, regulations, and/or QA/QC procedures and recommend rectifications. Train subcontractors on quality requirements and compliance, as necessary. Perform additional assignments per supervisor's direction. Travel Requirements: Skills, Knowledge, Qualifications & Experience: High school diploma or equivalent; some advanced education and/or technical training is desired. Self-motivated with a desire to be among a strong supportive team. AWS Certified Welding Inspector is desired. Prior NDT Level II (VT) certification is required, in accordance with SNT-TC-1A and endorsed by an ASNT NDT Level III. 3 years minimum experience in Visual Testing (VT). Welding experience is preferred but not required. Biopharmaceutical, high-purity inspection experience is required. Thorough knowledge of all aspects of construction (technology, equipment, processes, and methods). Thorough knowledge of company QA/QC policies, procedures and standards. Strong oral and written communication skills. Ability to identify, troubleshoot and resolve problems before major difficulties develop. Auditing skills. MS Office skills and ability/desire to learn new software. Excellent communication, organizational, and planning skills. Employment is contingent upon satisfying all jobsite-specific access requirements, with no outstanding restrictions from any jobsite or from working with any of InServ's partnering General Contractors, Owners, Customers, etc.

Ensures the unit is cosmetically perfect Confirms equipment is functioning to company standards Ensures that the system is complete (accessories, additional components, etc.) Provides feedback to the Senior QA Technician and Warehouse Manager on all discovered issues or defects Maintains record of all testing reports and calibration data Customizes imaging equipment to customer order Requests all necessary components to convert the incoming unit per order Performs all testing tasks and calibration Completes all paperwork on spare parts requested and provides results to the Senior QA Technician/Warehouse Manager Repairs equipment from customer returns Requests all necessary spare parts Completes all paperwork on parts in and out, provides results to the Senior QA Technician/Warehouse Manager Completes the all-final checking procedures per the QA Department standards Maintains a clean work area Collaborates with other departments: Customer Service, RMA, Shipping, and Parts Maintains current knowledge of all company products and all other matters that affect the dental industry Monitors workflow when the manager/supervisor is not available Ensures all processes and protocols are being followed Meets company standards pertaining to quantity and quality of work performed on an ongoing basis, performing all work-related tasks in a manner that is in compliance with all Company policies and procedures Adheres to Company policies, procedures and directives regarding standards of workplace behavior in completing job duties and assignments Repairs, troubleshoots, and updates computers to company standards Performs other duties as assigned MINIMUM QUALIFICATIONS: Training and Experience High School Diploma / GED Warehouse experience Proficient with Computers including Microsoft Office Basic networking skills (preferred) Knowledge, Abilities and Skills Ability to use hand tools and power tools Self-motivated, enthusiastic and willing to learn Proven organizational skills and ability to meet targets, goals, timelines, etc. Excellent verbal and written communication skills Detail-oriented Forklift certified (preferred) If not certified, must become certified within 3-months of hire

Since 1953, Red Valve has set the standard for solving the world's toughest flow control challenges through unmatched elastomer design and manufacturing experience. Red Valve is dedicated to exceeding customer expectations with proven, creative, high-value solutions. Red Valve has a passion for innovation and creativity, with a wealth of patents and best approaches developed for customers' needs. The people of Red Valve embrace this passion every day, providing reliable solutions to customers' most demanding challenges, wherever and whenever they are needed most. Our Core Values Driven to Win Right - Can Do! - High Power - Low Ego & Thrive Together Red Valve was acquired by DeZURIK on January 1, 2021. Our organization offers the following: * Sign On Bonus * Health and Wellness Incentives * Employee Engagement Activities A Red Valve Quality Inspector must be a highly motivated, creative, self-starter who will perform a variety of quality control tests/inspections on products, materials, components, and parts, at various stages of the production process to ensure compliance with quality and reliability standards. The ideal candidate will demonstrate the desire and ability to drive change, identify business needs, areas of improvement and objectives through research and data-backed decision making that will empower them to make recommendations on appropriate business initiatives. Based on the needs of the business, this is a rotational position throughout the facility, covering a variety of quality processes and/or initiatives. The rotational schedule will be determined by the Quality Manager as necessary. Essential Duties and Responsibilities include the following: Knowledge of and/or commitment to learn the following responsibilities: * Ensure quality of manufactured goods * Inspect finished goods * Examine materials from suppliers before sending them to production * Inspect components, subassemblies, and assemblies * Perform quick visual inspections * Perform complex tests using instruments and equipment * Test, measure, and analyze products * Take samples for testing * Ensure company is meeting the standard codes in the manufacturing process * Record pass/fail grade of products * Produce detailed reports * Comply with various ISO operating procedures, work instructions * Observe dials, gauges and indicators to make sure that a machine is working properly * Count numbers of products tested or inspected * Process associated documentation including process tags, rework tags and nonconforming material documents * RMA - issuing and processing * Responsible for final inspection and signoff, and will stamp "OK-Lead" Supervisory Responsibilities This position does not have any supervisory responsibilities. Education High school diploma or general education degree (GED); or a minimum of two years related manufacturing experience and/or training; or equivalent combination of education and experience with an emphasis in quality inspecting. Skills/Experience * 3+ years of quality or other related business experience * Bachelor's Degree in a technical discipline is preferred or equivalent field experience or training * Practical knowledge of Lean business practices * Excellent time management, communication, customer service, and interpersonal skills * Strong analytical skills * Ability to read, interpret and work from drawing, specifications and standards * Ability to inspect parts & components to tight tolerances and specifications * Required: Basic ability to add, subtract, multiply and divide in all units of measure * Required: Intermediate knowledge and skills in the use of standard mechanical and electrical instruments, gauges and test rigs * Required: Basic ability to work under direct supervision and to follow written instructions and techniques * Required: Basic ability to write simple correspondence * Required: Basic efficient time management * Required: Intermediate decision making * Required: Intermediate computer skills, including Microsoft office Travel No travel required Physical Demands To perform this job successfully, the physical demands listed are representative of those that must be met by an employee. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, walk, use hands to handle and feel, reach with hands and arms, talk and hear. The employee may occasionally be required to crouch. The employee may occasionally lift items as heavy as 50lbs. Specific vision abilities may include the employee's ability to see near and far distances. WORKING CONDITIONS Ability to work in normal manufacturing and varying climate control office environment. When working occasionally in some shop areas, personal protection equipment (PPE) will be recommended and/or required (safety shoes, safety glasses w/side shields, hearing protection, face shield, gloves, apron, and boots). Stress may result from workload and meeting schedules. Must have the ability to support extended business hours to meet customer business needs. The ability to multitask is essential job function for this role. * Shift schedule is (4) 10- hour days Monday - Thursday 6:00am - 4:30pm * Friday is reserved for overtime as necessary and may be required * Exposed to loud sounds and distracting noise level DISCLAIMER: The above information on this has been designed to indicate the general nature and level of work performed by the employee within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of any employee assigned to this job. Nothing in this job description restricts management's right to assign duties and responsibilities to this job at any time. QUALITY Quality encompasses all aspects of DeZURIK, Inc.'s business, and every employee shares the responsibility to prevent the occurrence of any nonconformity relating to product, process, and the quality system. All employees have an obligation to identify and record any such nonconformity, and, through designated channels, initiate and recommend solutions. BENEFITS DeZURIK offers a generous benefit package including medical, dental, vision, life insurance, disability, accident, critical illness, and 401(k). Health savings, flexible spending, and dependent care accounts are also available as part of the benefit package. Holiday pay, PTO, and volunteer time are available.

Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Location : Mebane, NC 27302 Duration : 6 months contract (With a high possibility of extension) • ISO 9000 experience • Manufacturing experience (work in manufacturing plant environment) • Leadership skills (facilitate meetings, drive change, lead team, etc) • Strong MS excel skills • SAP experience will be a plus (not required by highly desired) Job description: • Take responsibility for continuous improvement of production operations including safety, scheduling, quality, Lean and training/development in assigned areas • Develop and maintain Quality Management System documents such as manufacturing methods, technical documentation, and training documentation • Support and facilitate investigations, root cause analysis and corrective actions. • Practice analytical problem solving incorporating use of strong math skills • Demonstrate initiative to learn and seek improvement opportunities with minimal direction Qualifications • Must have a Technical or Business Associates degree or equivalent work experience. • Minimum 3 year quality control experience • Minimum 1 year ISO and/or regulatory experience • Demonstrate understanding of quality procedures and concepts • Demonstrated lean manufacturing participation • Demonstrated EHS participation and support Additional Information To know more about this position, please contact: Himanshu Prajapat ********************************** ************

Job Description Knapheide Installation Center in Raleigh, NC is looking to hire a Quality Technician I to evaluate the overall quality of the completed units produced at the facility. This full-time position works Monday - Thursday from 6:30 AM - 3:30 PM. At Knapheide, you're more than an employee. You're part of a family filled with multi-generation employees who take pride in the work they do. Knapheide has been in business since 1848 and is the premier work truck equipment, accessory, and commercial upfit provider in the United States. BENEFITS & PERKS Paid time off Paid holidays, including Black Friday and Christmas Eve 401(k) with 7% company contribution, once eligible Medical, dental, and vision insurance Employer paid life insurance DAY TO DAY AS A QUALITY TECHNICIAN As a Quality Technician I, you'll inspect units to ensure the final product meets quality standards for form, fit, and function and matches the customer order. You'll work with the production team to ensure repairs are completed in a timely manner in order to maximize customer satisfaction. You'll assist in communicating quality issues throughout the organization in order to prevent further occurrences. To be successful in this role, you'll need to be detail oriented and have a strong mechanical background. OUR IDEAL CANDIDATE Career-minded - looking for more than a job Team player - gets along well with others Organized & attentive to detail - nothing gets by you without being double-checked Efficient - a knack for effectively prioritizing tasks and managing your time REQUIREMENTS High School Diploma or GED Equivalent; Associates or Bachelor's Degree preferred Previous experience working in a Quality role preferred Ability to lift/move up to 75 pounds If you're someone who never settles for second best, takes pride in the work you do, and you're looking for a jump start on a new career, apply today!

JobID: 8801 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

Job Description Edwards, Inc. is a full-service industrial general contractor providing construction, fabrication, and crane services. We are currently seeking a Day Shift Quality Control Welding Inspector for our Spring Hope, NC, Pipe Fabrication Shop. This position is Monday through Thursday 6am to 6pm. Fridays and Saturdays are possible depending on workload. The QCI Inspector will be responsible for: Reading and interpreting shop fabrication and isometric drawings. Verifying pipe spools dimensions as fit-up to shop fabrication and isometric drawings. Verifying heat number traceability is correct as recorded. Provide a visual weld examination of shop welding. Verify welding filler materials are in compliance and the LOT traceability is recorded. Monitor welding to ensure weld procedure specifications are being followed, correctly. Verify weld preparations, weld sizes, and weld placement in accordance with shop weld details. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements 5 years of experience in industrial piping (preferred but not required) Organizational Skills Able to interpret basic weld symbols as defined by AWS A2.4 Able to read and interpret Codes (i.e. ASME B31.1, B31.3, etc.) Ability to read shop fabrication and isometric drawings. Ability to read dimensional measuring devices. Experience in reading weld procedures and specifications (Preferred) Current AWS Certified Welding Inspector (preferred but not required) Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License (Preferred) High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus but not required. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************ Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.

Company / Location Information A.O. Smith is a global leader applying innovative technologies and energy-efficient solutions to products manufactured and marketed worldwide. The company is one of the world's leading manufacturers of residential and commercial water heating equipment and boilers, as well as a manufacturer of water treatment products for residential and light commercial applications. A. O. Smith is headquartered in Milwaukee, Wisconsin, with approximately 12,000 employees at operations in the United States, Canada, China, India, Mexico, the Netherlands, and the United Kingdom. Primary Function Employee is responsible for performing all Quality related functions required. This employee will maintain and update action items generated by the activities. Employee must communicate with upper management, peers, other department supervisors, engineers, etc. Employee will be responsible for manufacturing and/or Lab audits and reviews. To perform routine checks, tests, gaging, and instrument inspections of materials, goods in process, and finished goods. We Offer Competitive compensation package and comprehensive benefits plans which include medical and dental insurance, company-sponsored life insurance, retirement security savings plan, short- and long-term disability programs and tuition assistance. Hours: M-F, 3:30pm- 12:00am (midnight), Occasional OT, possible Saturdays Pay: $20.83/hr + $.75 shift premium #LI-Onsite #LI-AO Responsibilities Performs assigned routine tests on materials, goods in process, or finished goods where results are compared with company quality standards. Reports results to supervisor who will make an analysis and take necessary action. Inspects visually for obvious defects. Performs detailed visual inspection when necessary to determine quality of product where limits are not clearly defined. Removes defective product and places acceptable product back on line. Notifies line supervisor when inspection data exceeds acceptable limits or when major incidents of poor quality are noted. Records results on inspection forms or charts and reports number of defects found. Posts and maintain forms and charts of inspection data, quality levels, or special quality studies. Makes recommendation on disposition of questionable product to supervisor. May act as quality control department clerk, maintaining all quality records for the facility. May act as scrap collector, touring the facility and removing tested and product samples from QC inspection stations. Perform other duties as assigned Qualifications Knowledge of Quality processes, procedures, and tools (SPC, Six Sigma, and Statistical Analysis) Familiar with ISO requirements Familiar with Lean Manufacturing Communication and leadership abilities Excellent organizational skills Ability to initiate change and continuous improvement Able to achieve goals and results Ability to work well with cross-functional team Strong working knowledge of Microsoft Word, PowerPoint, and Excel 2 years related experience preferred Education High School Diploma or GEDADA Statement & EEO Statement In developing this job description care was taken to include all competencies needed to successfully perform in this position. However, for Americans with Disabilities Act (ADA) purposes, the essential functions of the job may or may not have been described for purposes of ADA reasonable accommodation. All reasonable accommodation requests will be reviewed and evaluated on a case-by-case basis. We consider all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status. We also provide reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law.

Aircraft Inspector: To ensure that MAC aircraft are maintained to the highest standard possible, while enforcing all procedures and policies established by MAC and Current Federal Aviation Regulations. RESPONSIBILITIES/DUTIES: Promotes safety throughout the organization as mandated through Company policies identified by executive management. Ensures the adherence to the designated programs outlined in this manual. Demonstrates on a daily basis a commitment to the continuous improvement of safety throughout the organization. Ensures compliance with safety policies and procedures found in Company manuals. Ensure a safe and healthy workplace for employees in the Maintenance Department. Ensure employees comply with Company safety policies and procedures. Make decisions regarding safety risk acceptance involving Airworthiness release process. Ensure Company aircraft are properly certified and maintained in accordance with Company policies and procedures. Reviews routine and non-routine work cards for accuracy and completion. Certifies the aircraft airworthiness (with regard to the work performed) after an inspection by signing the airworthiness release in the AFML. Records discrepancies detected on appropriate work sheets. Evaluate and submit changes in the inspection and maintenance procedures. Aid the DQ/CI in ensuring that Company aircraft are in compliance with all applicable Airworthiness Directives (AD). Make decisions regarding safety risk acceptance involving the Process Specifications management process. Ensures the quality for the airworthiness release / logbook entry process. Assists in the oversight of the MAC Tool Calibration Program. Assists in the oversight of the MAC Shelf Life Program. Ensures contractors that perform work on MAC aircraft or appliances are in compliance with applicable CFR and Company policies and procedures. Prepares and submits FAA Form 337 and / or EO s for the accomplishment of a major repair or alteration to MAC aircraft or components, as required. Accomplishes the corrective actions for the Quality Control Department requested by the CRB. Update Weight and Balance Report (WBM-QC-005) after each weighing event or recalculation Assist Tech Services with troubleshooting of aircraft In addition to routine inspection duties, an inspector may be required to perform receiving inspections of materials and/or equipment for use on MAC aircraft. Other duties as assigned by the Lead Inspector. QUALIFICATIONS: Must hold a current A&P license Must meet the requirements of 14 CFR 65.83 Three (3) years experience on aircraft with 10 or more seats or same class aircraft Must have a good command of the English language, both written and verbal SPECIAL POSITION REQUIREMENTS: Airworthiness Release Authorization RII Receiving Inspection Engine Run and Taxi Borescope Inspections (based on need) SUPERVISORY RESPONSIBILITY: Responsible for the maintenance performed by Class III ACMP, to include providing all maintenance documentation and applicable maintenance references. TRAINING REQUIREMENTS: ATR Fam Course PWC 100 Series Maintenance Course Hamilton Sundstrand 14SF and 247F Propeller Maintenance Course ATR Engine Run and Taxi Course MAC Basic Electricity Course EWIS Course CPCP Course WORKING CONDITIONS AND PHYSICAL EFFORT: Work typically performed in an office environment. However, due to work requirements, may require frequent travel which will involve exposure to noise, chemicals, adverse temperatures and other similar hazards. Mountain Air Cargo, Inc. is an Equal Opportunity Employer. We offer a comprehensive benefits package.

Acute Care TechnologySee attached Job Description At ZOLL, we're passionate about improving patient outcomes and helping save lives. We provide innovative technologies that make a meaningful difference in people's lives. Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiopulmonary and respiratory conditions. The Acute Care Technology division of ZOLL Medical Corporation develops and delivers innovative lifesaving products and software solutions to EMS, hospital, public safety, and military customers globally. Products include AEDs, trauma kits, ventilators, temperature management solutions, and more. Our dedicated employees take pride in their commitment to improving patient outcomes while delivering world-class customer service. At ZOLL, you won't just have a job. You'll have a career-and a purpose. Join our team. It's a great time to be a part of ZOLL! Job Summary Verification of procured materials, sub-assemblies, finished products and processes to the companies Quality Standards. This may include visual inspection, dimensional measurement, and electrical testing to verify conformance to established standards and specifications. Essential Functions Inspect measure and/or test material to established methods and standards. Utilize various inspection tools, such as Vision System, Verniers, Micrometers, Rulers, Oscilloscopes, DVMs, Power Supplies, Defib/Pacer Analyzers, custom fixtures etc. per procedures. Document inspection and test results according to established procedures. Maintain quality documentation files such as, Device History Records (DHR) and Inspection History Records. Process returned material to established procedures. Read and interpret documentation such as Standard Operating Procedures (SOP), schematics, technical drawings, PDAs and ECOs. Interface with other functions and departments as required. Required/Preferred Education and Experience High School Diploma Or equivalent. required 1-3 years experience in a related position. required Knowledge, Skills and Abilities Good written and oral communication skills. Ability to read specifications, procedures and engineering drawings. Familiar with use of mechanical and electronic test equipment. IPC-A-61OD for Incoming Inspection, preferred. Basic computer skills: Microsoft Office, Oracle and MES. Physical Demands Ability to lift up to 50 lbs. ZOLL is a fast-growing company that operates in more than 140 countries around the world. Our employees are inspired by a commitment to make a difference in patients's lives, and our culture values innovation, self-motivation and an entrepreneurial spirit. Join us in our efforts to improve outcomes for underserved patients suffering from critical cardiopulmonary conditions and help save more lives. #LI-LV1 The hourly pay rate for this position is: $24.00 to $25.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran. ADA: The employer will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990.

Acute Care TechnologySee attached Job Description At ZOLL, we're passionate about improving patient outcomes and helping save lives. We provide innovative technologies that make a meaningful difference in people's lives. Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiopulmonary and respiratory conditions. The Acute Care Technology division of ZOLL Medical Corporation develops and delivers innovative lifesaving products and software solutions to EMS, hospital, public safety, and military customers globally. Products include AEDs, trauma kits, ventilators, temperature management solutions, and more. Our dedicated employees take pride in their commitment to improving patient outcomes while delivering world-class customer service. At ZOLL, you won't just have a job. You'll have a career-and a purpose. Join our team. It's a great time to be a part of ZOLL! Job Summary Verification of procured materials, sub-assemblies, finished products and processes to the companies Quality Standards. This may include visual inspection, dimensional measurement, and electrical testing to verify conformance to established standards and specifications. Essential Functions * Inspect measure and/or test material to established methods and standards. * Utilize various inspection tools, such as Vision System, Verniers, Micrometers, Rulers, Oscilloscopes, DVMs, Power Supplies, Defib/Pacer Analyzers, custom fixtures etc. per procedures. * Document inspection and test results according to established procedures. * Maintain quality documentation files such as, Device History Records (DHR) and Inspection History Records. * Process returned material to established procedures. * Read and interpret documentation such as Standard Operating Procedures (SOP), schematics, technical drawings, PDAs and ECOs. * Interface with other functions and departments as required. Required/Preferred Education and Experience * High School Diploma Or equivalent. required * 1-3 years experience in a related position. required Knowledge, Skills and Abilities * Good written and oral communication skills. * Ability to read specifications, procedures and engineering drawings. * Familiar with use of mechanical and electronic test equipment. * IPC-A-61OD for Incoming Inspection, preferred. * Basic computer skills: Microsoft Office, Oracle and MES. Physical Demands * Ability to lift up to 50 lbs. ZOLL is a fast-growing company that operates in more than 140 countries around the world. Our employees are inspired by a commitment to make a difference in patients's lives, and our culture values innovation, self-motivation and an entrepreneurial spirit. Join us in our efforts to improve outcomes for underserved patients suffering from critical cardiopulmonary conditions and help save more lives. #LI-LV1 The hourly pay rate for this position is: $24.00 to $25.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran. ADA: The employer will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990.

Job DescriptionLocation: Wilmington, NC Hourly Rate: Depending on Experience. About Us: We are a veteran owned contractor, providing project, maintenance, and outage support throughout the United States. Over the past 15 years we have proven to be a trusted partner for our clients while providing services that help power the world. Summary: We are looking for a skilled QA/QC lead. All applicants must be familiar with ASME Boiler and Pressure Vessel Code, welding processes, SMAW, GTAW and FCAW. Must be familiar with NDT methods, visual, magnetic particle, liquid penetrant, radiography experience helpful. Responsibilities: • Performs process/product quality evaluations, conducts special studies and projects as requested by Quality Engineers. • Investigates and recommends solutions to quality data collection systems problems. • Performs Product/Material certification activities. • Controls release and status of acceptable, suspect, and non-conforming material and products. • Responsible for the development and maintenance of QA record Retention Systems. • Must be able to work with minimal supervision and make independent sound judgments. • Must be able to perform detailed mechanical and visual inspections as required. • Perform Dedication activities per specifications, drawing or test plans on commercial grade products to upgrade to nuclear grade material. • Responsible for implementing QA requirements contained in Quality Planning, Engineering specifications, Order Entry • Documentation, Purchase Orders and applicable regulatory requirements. • Responsible for dedication inspection/testing of product and certifying this activity. • Provides accurate and timely data analysis to support requests from customer, supplier, or Engineering. • Periodically interacts with internal/external auditors, customers, and suppliers. Must establish and maintain effective working relationships with individuals, auditors, managers, suppliers, and customers. • Capable of performing complex inspections and tests on product and material using standard and special gages. • Other duties as assigned. Qualifications: • Proficient with standard computer software (MS Word and Excel) and be able to write detailed inspection reports while maintaining an organized system of files. • Must have basic understanding of statistics, algebra and trigonometry. • Must have a minimum of 1-year experience in the nuclear industry with a working knowledge of the requirements of 10CFR50, Appendix B and ANSI N45.2.. • Must be certified in the following: ANSI N45.2.6 Level II, MT & PT Level II and VT-1 Level II. • Self-motivated with good written and verbal communication skills with a positive team-oriented attitude is required. • Must have reliable transportation and be able to travel extensively with an unrestricted driver's license. • Must pass background screens and drug/alcohol testing as required by our customers, including randoms. • Non - US Citizens must hold current work visa or green card. • High School Diploma or GED Preferred Qualifications: (not required) • Minimum of 5 years' experience in Quality Assurance or Quality Control Activities. • Minimum of 5 years' experience in fabrication, welding, manufacturing or related field. • Minimum of 5 years' experience in Mechanical/Dimensional inspection. Physical Requirements: • Must be able to work in heightened environments. • Must be able to carry 20lbs. • Must be able to push, pull, lift, climb, and extend as required for the job. • Must be able to work in high heat environments. • Able to stand, bend & kneel for extended periods of time. • Able to lift 50lbs. • Able to work in a confined space/ highly congested work area. • Able to wear full body protective clothing, to include face shield. • Able to work in radiation control areas. Powered by JazzHR jWNuE4rBqM

Discover your exciting role The primary responsibilities of this position include conducting : visual inspections, checking coating thicknesses, spark testing of all coated surfaces; repairs. All listed duties are to be conducted in accordance to Fab Tech's set standards & meet all FM criteria. Explore your tasks and responsibilities * Conduct thorough visual inspections to ensure aesthetics of all parts meet Fab Tech's high quality criteria standards * Inspector will responsible for ensuring that coating thickness of parts meet mil thickness specification * Coating inspector will spark test all coated surfaces to ensure all coated surfaces within set parameters are free of defects * Coating inspectors will also be responsible for making judgement calls determining whether product needs to be reworked/repaired * Individual will be responsible for performing manual repairs on all defected parts Show your expertise POSITION REQUIREMENTS * Minimum high school diploma or equivalent. * Ability to stand on feet for up to 10 hrs. daily * Must be able to work in a fast paced work environment * Position requires the ability to make independent decisions based on standards * Attention to detail is a must * Gloves need to be worn during all visual; spark testing procedures * Note: Must pass PFT; RFT in order to wear 7700 series respirator Personal Attributes * Independent * Dependable, determined, positive in demeanor * Attention to detail. * Team player * Good attitude Physical Demands * Frequent standing, sitting, bending at the waist, and use of hands in this role is required * Specific vision abilities required to include close vision, and the ability to adjust focus * Occasionally perform physical activities including lifting (up to 50 lbs. unassisted) Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the production area is usually moderately loud. The Blast department is a sectioned off area of the production floor. Various blasting, grinding, inspecting and welding tasks are performed within the Blast department. * Safety glasses and hearing protection are required when in the production area * PPE covering eyes and skin is required when welding or heat induced cutting * PPE specific to tasks being performed is required Non-Solicitation We are not currently accepting third-party agency candidates for this position. Any agency candidate submitted to any employee of Exyte or TFS may be contacted by Exyte or TFS without obligation to the third-party agency. Employment Sponsorship Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor employment visas at this time. EEO Statement Exyte US, Inc. and its subsidiaries are proud to be an Equal Employment Opportunity employer that is committed to supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by applicable federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact Clinton Crellin via E-Mail at ************************* Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.

Are you looking for a Company you can "GROW" with, Look no farther, CMC Hotels can provide this opportunity to you. We believe in Growing People. Our people are the Heart of our organization. The growth and success of our portfolio will be possible by the contribution of our associates who will be recognized, grow and succeed with us. We offer our associates an array of benefits, based on eligibility, including: * Competitive wages based on experience * Paid Vacation * Holiday Pay * Medical, Dental, Vision Insurance * Sick Leave * 401k * Hotel Discounts RESPONSIBILITIES: * Follow 15/5 rule, make eye contact and smile at 15 feet, greet guest within 5 feet, to ensure complete guest satisfaction. * Must wear approved uniform at all times while working, including nametag. * Responsible for assisting in cleaning rooms or public areas and performing laundry functions as workload may require. * Responsible for establishing and implementing proper standards and procedures for housekeeping staff ensuring brand and corporate standards. * Enforces established policies and procedures for CMC and the hotels brand. * Responsible for training all housekeeping and laundry staff according to expectations and standards. * Communicates daily with other management, and department heads and employees to ensure proper operating procedures are in compliance. * Responsible for conducting daily inspections of all areas cleaned by the Housekeeping Department including the guest rooms and public areas. Record all relevant information on the Housekeeping Inspection Report. * Responsible for installing inventory controls for uniforms, linens and/or supplies to be monitored by issuance procedures and purchasing. * Responsible for inventories of guest supplies and amenities including equipment on an ongoing basis. * Responsible for monitoring and controlling the budget. * Responsible for key control as noted in the housekeeping manual. * Responsible for managing, monitoring and making adjustments to comply with energy conservation program management. * Responsible for ensuring proper maintenance in regard to building, furniture, fixture, and equipment. * Responsible for evaluating condition of furniture, fixtures, décor and make recommendations and assist in the coordination of rehab projects. * Ensures Security for the hotels customers, employees, and property assets. * Responsible for updating all safety procedures. * Responsible for compliance with fire and safety issues. * Responsible for following and implementing the DND policy to fellow associates, reference Life Safety handbook if necessary. * Responsible for reporting maintenance issues, using the corporate approved tickets, and making sure room is noted as out of order until repair can be made. * Responsible assisting Executive Housekeeper in conducting room attendant training to improve weak areas reflected in the individuals performance evaluations. * Responsible for assisting the Executive Housekeeper in completing room assignments for the Room Attendants from the Housekeeping Report. * Responsible for serving as the Executive Housekeeper in their absence for days off, sick, vacation or other. * Execute any other tasks or duties deemed necessary by hotel management for the successful operation of the property.

We are hiring Inspector / Packagers at our Whitsett, NC plant, located at 6900 Konica Drive immediately with a start date as soon as Monday, March 17, 2025 Daytime Shift: 6:30 am to 5:00 pm, Monday through Thursday - 4 Ten hour shifts. Must be able to stand for the duration of your shift on an assembly line. We will provide the training and the tools that you need to be successful in your position. This is a job that is fast paced, working as part of a team and there is plenty of work to accomplish. We have a great place to work with awesome employees. We have 3 positions, 40 hours a week at $12.00 an hour to start. After 60 days, if you have great attendance, a willingness to learn and work as a member of a team, you will be eligible for health insurance, Paid Time off, a 401K plan, 10 Paid Holidays and a salary increase after six months. A great Zink perk is you will always enjoy every Friday, Saturday and Sunday off. You read that correctly. You will never have to work on a weekend! We are open to hiring college students, people looking for their 1st job or anyone who is willing to work. Please apply online at ******************** No outside agencies or recruiters please. For immediate consideration, apply online ******************** or send your resume to ********************* Zink is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. No recruiters or agencies. Thank you for your interest.

About Williams-Sonoma DC -Claremont, NC Since it was founded in 1956, Williams - Sonoma has grown from Chuck Williams' single store in Sonoma, CA into one of the largest retailers in the country, with some best known and most beloved brands in home furnishings, including Williams - Sonoma, Pottery Barn and West Elm. Our Distribution Centers serve as vital connections between factories and our retail, online and mail-order customers around the world. The Supply Chain environment is dynamic and fast-paced, and the network is expanding rapidly. If you have a background in distribution, manufacturing, engineering, transportation, finance, human resources, or home delivery - and are looking for a job with a strong opportunity for gaining new skills and for advancement - our Supply Chain Organization could be just the place for you. Williams-Sonoma, Inc Supply Chain Overview By managing resources responsibly, caring for our people, and uniting around our values, we lead our industry and are proud to be recognized for our continuous action and progress in the following areas: Barron's 100 Most Sustainable Companies; Forbes Best Employers for Women and Diversity; Newsweek America's Most Responsible Companies; and USA Today Customer Service Champions. These honors reflect that we are truly a people-first organization. * Over 4,000 Full-Time Associates across the Supply Chain * 14.5M square feet of small parcel, personalization, furniture, and manufacturing space in the domestic US, Williams-Sonoma has developed an agile and capable distribution network consisting of the following: * Large package / furniture distribution centers located in Southern California, Northern California, Texas, Georgia, and New Jersey totaling 9.2M square feet plus another 1.2M square feet of standalone final-mile furniture hubs. * Small package eCommerce distribution centers located in Mississippi and Arizona totaling 3.2M square feet, consisting of over 1,000 full-time associates and 1,500 seasonal/temporary associates in Mississippi * Sutter Street Manufacturing upholstery factories located in North Carolina and Mississippi totaling with over 1,400 full-time employees producing approximately $900 million to $1 billion in sales of upholstered furniture * Transportation Department for Ocean, Air, Trucking, and Rail consisting of over 30 transportation professionals located in Memphis, TN * 700 associates in our Sourcing offices in 10 countries in Asia and Europe including China, Vietnam, Singapore, India, Italy, and Turkey The Final Inspect position is located in Claremont, NC. You'll be excited about this opportunity because you will.... * Cutting all strings and detailing the whole piece of furniture. * Assure ticket and fabric are correct with the frame piece. * Inspect overall appearance to include standing back and visually checking. * Complete final inspection to include, but not limited to, all seams are sewn straight, no dropped stitches, no puckered fabric, no fabric defects visible, cushion corners even side to side with tailoring correct, cushions & backs filled out correctly and fit the piece, no lumps or cat tracks, assure all welt is straight and even. * Assure all deck labels are in the correct location. * Take photos of each piece for tracking quality issues. Note: This job description reflects essential functions, it does not prescribe or restrict the number or types of tasks that may be assigned or reassigned during the conduct of business. Check out some of the required qualifications we are looking for in amazing candidates…. * At least 6 months to 1 year of experience in the quality control area. * Experience in an upholstered furniture manufacturing environment preferred. * Experienced in using computers for tracking and updating kit location for customer service. * Ability to perform multiple tasks in a fast-paced environment to assure delivery requirements. We prefer some of these qualities as well…. * High School Diploma or equivalent. * Experience in an upholstered furniture manufacturing environment preferred. Review these physical requirements, as they play a major part in this role…. * Ability to frequently lift bundles of approximately 50-75 lbs. * Ability to bend and twist. Our company benefits are second to none in the industry…. * Generous discount on all Williams-Sonoma, Inc. brand products * 401(k) plan and other investment opportunities * Paid vacations, Employee Assistance Programs, Time Off to Volunteer, Matching Gifts Community Service Program, and Holidays (in some locations) * Health benefits, dental and vision insurance, including same-sex domestic partner benefits, Legal and Identity Protection Plans and Pet Insurance * For more information on our benefits offerings, please visit MyWSIBenefits.com * To learn more about our Supply Chain culture and regional associate events, please visit: ************************* (Login credentials may be required) EOE

Performs a variety of quality and/or safety checks to ensure compliance with quality standards, reliability standards, and all specifications. Assists with troubleshooting and resolving quality issues through audits, sampling, inspection, and functional testing. Supports implementation of new quality processes. At Butterball, we exist to help people pass love on. As the most recognized name in turkey, the brand represents more than 60 years of cherished memories, providing quality, great tasting products that make meals something to celebrate every day. We proudly believe that life at Butterball means having a team who supports you, having the opportunity to grow personally and professionally, and making an impact on the health of others daily. Whether you choose to work at one of our five (5) manufacturing facilities in NC, AR, MO, farms in AR, NC, and KS, corporate office in NC, IL, or in the field, we believe we have an opportunity for everyone to succeed. At Butterball, we believe in fostering a culture where every team member is valued, has the opportunity to grow professionally and contribute to our success. Join us in our Purpose and apply for an opportunity today! Key Responsibilities * Monitors processes to ensure compliance with food safety, regulatory and company compliance, including GMP, HACCP, and SOPs. * Collects microbiological and product samples for testing and evaluation. * Performs checks of product quality against specifications. * Assists with audits of the process, GMP's, food safety, and customer audits. * Investigates issues related to Quality and Food Safety. * Records findings and assists with troubleshooting quality, safety, or sanitation issues. * Applies holds to nonconforming products and materials. * Assists with product improvement projects. * Assists with data verification and quality metrics reporting. Minimum Qualifications (Educations & Experience) * High school diploma, GED, or equivalent * 1+ year of experience or the knowledge, skills, and abilities to succeed in the role Knowledge, Skills, and Abilities Butterball Core Competencies Caring about people, valuing contributions, and empowering to succeed is the Butterball Way. We recognize the value that different perspectives and cultures bring to Butterball and seek to create an environment where everyone can thrive. Everyone has a seat at the table and is expected to embody our core competencies: * Safety First: We put safety first. The health, safety, and well-being of our people, products, and turkeys is everyone's responsibility and everyone's jobs. * Integrity: We trust each other to do the right thing. We act with integrity and gain the confidence and trust of others through honesty, respect, and authenticity. * Stewardship: We take care of what matters. We are accountable to our commitments and take responsibility for the well-being of our teams, our quality, our customers, our business, our brand, and our communities. We are always answerable for our actions and those we lead. * Enthusiastic Attitudes: We create a climate where everyone feels they belong and can be engaged, every day. Where our people are enthusiastic and motivated to do their best and work together to make great things happen. * Continuous Improvement: We are committed to continuous improvement. We challenge ourselves and our company to constantly learn, develop, grow, improve, and innovate. Essential Knowledge, Skills, and Abilities * Knowledge of workplace safety rules * Basic understanding of manufacturing processes * Good math skills * Ability to speak, read, and write in English * Good communication and customer service skills with the ability to interact at all levels * Excellent attention to detail * Firm problem-solving, organization, time-management, and critical thinking skills * Ability to understand and follow directions to ensure compliance with all applicable standards and regulations Preferred Knowledge, Skills, and Abilities Physical Demands * While performing the duties of this job, the employee may be regularly required to stand, sit, talk, hear, reach, stoop, kneel, and use hands and fingers to operate a computer, telephone, keyboard, and occasionally lift up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, color vision and the ability to adjust focus. Working Conditions & Travel Requirements * Work will be performed in a variety of conditions. Occasionally in a climate-controlled office environment(s) and primarily in a manufacturing plant environment with varying conditions, such as cold areas, wet areas, warm areas, chemicals, and other site conditions. This position requires the individual to wear and work in personal protective equipment while in the manufacturing environment. * The noise level of the office environment is usually moderate; the noise level in the manufacturing environment may exceed 85 DBA and require hearing protection. * Occasional travel may be required. Disclaimer We embrace equal opportunity employment. Butterball is committed to the fair and impartial treatment of all employees and applicants for employment without regard to gender, age, race, religion, color, national origin, physical or mental disability, military/veteran status, sexual orientation, gender identity and expression, genetic information, marital status, parental status, pregnancy, or any other status protected by law. This position is deemed Safety Sensitive for purposes of Butterball's Drug/Alcohol Screening & Testing Policy. Details will be provided to individuals who receive a conditional job offer, or upon request. The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of what is required of personnel so classified. Furthermore, they do not imply or establish a contract for employment and are subject to change at the discretion of the employer.

Job Title: QC Environmental Monitoring Technician Department: Quality Control The QC Environmental Monitoring Technician is responsible for supporting parenteral manufacturing operations through routine environmental monitoring of classified manufacturing areas, as well as conducting clean utility sampling and analysis within both manufacturing and QC laboratory facilities. This role plays a critical part in ensuring compliance with cGMP requirements and maintaining a controlled manufacturing environment to support the production of safe and effective pharmaceutical products. Key Responsibilities: Adhere to and promote compliance with all cGMP procedures, Quality Systems, and Good Documentation Practices (GDP). Perform routine environmental monitoring of classified manufacturing areas to support both standard operations and Environmental Monitoring Performance Qualification (EMPQ) activities. Conduct clean utility sampling and analysis, including but not limited to: Compressed air Potable water Purified water Water for Injection (WFI) Clean steam Support manufacturing and laboratory activities by providing timely and accurate environmental monitoring data. Enumerate, review, and document sampling results in LIMS or other laboratory data systems. Perform Second Person Verification (SPV) of environmental monitoring results on a routine basis. Participate in continuous improvement projects and quality initiatives. Assist with authoring and updating Standard Operating Procedures (SOPs) and Work Instructions as required. Adhere to and promote compliance with all site safety standards. Minimum Requirements: High School Diploma or equivalent required; Associate degree preferred. 2+ years of experience performing Environmental Monitoring in a GMP pharmaceutical manufacturing environment, preferably supporting aseptic or parenteral production. Demonstrated experience with environmental monitoring techniques, including: Viable surface monitoring Viable air monitoring Non-viable air monitoring Compressed air sampling Water and clean utility sampling and analysis Experience with laboratory systems such as LIMS, LES, and/or MODA. Preferred Qualifications: Strong understanding of cGMP requirements and regulatory compliance. Experience performing environmental monitoring within filling isolators or restricted access barrier systems (RABS). Ability to train and mentor junior Environmental Monitoring Technicians. Strong verbal and written communication skills. Ability to work effectively with cross-functional teams. Physical & Work Environment Requirements: Ability to work in laboratory and cleanroom environments while wearing appropriate PPE. Ability to gown into facility-dedicated cleanroom attire as required. Ability to stand or walk for extended periods and perform repetitive tasks. Ability to lift, push, pull, and carry up to 30 pounds. Work Schedule & Travel: Ability to work 12-hour shifts. Flexibility to work day or night shifts as required, especially during training and startup phases. Role may initially support project/startup activities and transition into a routine operational support role.