Quality inspector jobs in Oceanside, CA - 252 jobs

Inspector Senior Job Type: Contract Contract Length: 6+ Months JobsRUs.com. is seeking to hire a Inspector Senior for our client in Irvine, CA! Benefits Available! Weekly Pay! $40.25/Hour Shift Details: 1st shift DESCRIPTION: With limited guidance in a team environment, responsible for various semi-complex inspection requirements. Responsibilities may include some or all of the following: Maintain accurate and up-to-date acceptance and rejection records or certifications systems as required by the applicable specifications. Determine acceptance or rejection after inspection or calibration of parts, tools, instruments or x-ray film. Identify defective conditions and test failures and prepare all appropriate documentation or calibration history. INSPECTION Perform semi-complex inspection on detailed machined parts using a wide variety of measuring instruments to determine acceptability or rejections of parts or parts finish. Adapt and develop inspection set-ups to check sample parts, forgings and castings. Check tool and jig layouts. Perform first article and envelope inspection, source inspections, or semi-complex surface plate set-ups. Interpret specifications, charts, manuals and other data to arrive at acceptance or rejection. Use mathematics to convert blueprint dimension and tolerances. Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements and military standards. Layout and measure hole locations and centerlines on castings, forgings, and machine parts to maintain control of machining cycle during manufacture. Determine acceptance or rejection after inspecting parts, tools, instruments or x-ray film. Identify causes of defective conditions and test failures and prepare all appropriate documentation. Investigate cause of customer return failures. Perform inspections to applicable specifications within assembly, test and shipping departments. Assist customer or government source inspectors as necessary. CALIBRATION Perform calibration on various types of semi-complex measuring and test equipment. Set-up calibration test conditions interpreting calibration procedures, specifications, manufacturing instructions or related documents. Document and evaluate historical data to determine calibration intervals. Diagnose and calibrate newly acquired equipment. NONDESTRUCTIVE TEST Perform daily, weekly and monthly equipment and material checks. Perform pre-inspection and post-inspection cleaning. Set-up equipment and conduct tests of a semi-complex scope. Perform complete inspections in accordance with the applicable specifications, standards and other contractual documents. Interpret, evaluate and document inspection results in accordance with approved procedures. Observe all prescribed safety rules and regulations and maintain a FOD free work area. Perform other related responsibilities. Job Requirements: Three years related inspection, calibration, or NDT experience or demonstrated ability to perform described responsibilities. May be required to be certified as a Level II Nondestructive Test Inspector in two or more disciplines. Certification must be in accordance with MIL-STD-410 and PES1-29. Preferred experience of CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5. Knowledge of applicable military standards or specifications required. Proficient in reading and interpreting blueprints, customer's specifications and internal drawings and procedures. Possess working knowledge of shop mathematics including trigonometry. Education Required: High School or equivalent

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview Under the direction of the Task Order Manager, the Quality Control Inspector is responsible for conducting inspections to ensure compliance with contract requirements and Quality Control and Safety Plans. Pay Rate: $26.74/hourly Work Model: Onsite Responsibilities Essential Duties & Job Functions: * Review all site work to verify compliance in accordance with applicable plans and procedures. * Inspect and diagnose problems to determine corrective actions/repairs. * Inspect work in progress and finished work for discrepancies in accordance with the QC and applicable Safety Plans, and contract requirements.Complete necessary inspection reports and documentation required to support findings. * Assist in preparing Safety incident and hazard reports as required. * Maintains accurate administrative records. * Review all site work to verify compliance in accordance with applicable plans and procedures. * Respond to emergency site maintenance as required. * Ensures proper housekeeping practices are strictly observed. * Maintain open communications with personnel. * Performs other duties as assigned by the supervisor. * Other duties as assigned. Accountable For: * Tools and equipment within his or her possession. * Using PPE when required. * Timely completion and accuracy of all work. * Working closely and harmoniously with fellow workers. * Adherence to all Safety rules and regulations. Job Requirements Mandatory: * Working knowledge of Microsoft Programs, including but not limited to: Outlook, Word, PowerPoint, and Excel or equivalent software program. * Understanding of Government contracts, correspondence, reports, and records. * Knowledge of generally accepted standards of workmanship in custodial services. * Excellent communication skills, both oral and written. * Excellent organizational skills. * Mature judgment and ability to work with little or no supervision. * Ability to communicate ideas effectively with personnel at all levels. * United States Citizen. * High School Diploma or Equivalent. * Ability to pass pre-employment background check and drug screen. * Must be able to read, write, and speak English fluently. * Valid driver's license with excellent driving record (Must provide current driving record). * Ability to obtain access to U.S. Government Installations through the Defense Biometric Identification System (DBIDS). Preferred: * 2 yrs custodial experience. * Two-year degree in Safety, Industrial Hygiene, or a related field or broad experience in the same or similar areas. * Bilingual - Spanish Working Conditions: * Work is performed indoors and outdoors. Outdoor work is subject to temperature extremes and inclement weather conditions. * Work hours are subject to change, with overtime, weekend and/or holiday work as needed. * Subject to hazards that may cause personal bodily harm; diseases, cuts, bruises, burns, common cold, influenza, dust odors and elevated noise levels. * Tasks may be performed on uneven, inclined, hard and soft carpeted floors, cement structures and surfaces. * While performing duties of this job, the employee is occasionally required to stand and/or walk for long periods of time, sit, use of hands and fingers, handle, or feel objects, tools or controls, reach with hands and arms, climb stairs, climb ladders, balance, stoop, kneel, crouch or crawl, talk, hear, or smell. The employee must occasionally lift and/or move up to 35 pounds. Specific vision abilities required by the job include close vision. May be required to operate regular and specialized vehicles. Physical Requirements: * Must be able to lift to 50 lbs. * Must be able to climb stairs and ladders as required. * Must be able to load/unload materials, tools, and equipment. * Involves walking, bending, stooping, twisting, and reaching. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any if its subsidiaries, please email ******************. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. We're looking for people who put their innovation work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. What You'll Do: * Conduct thorough product inspections using work instructions, checklists, and technical drawings. * Prioritize tasks based on direction from Operations Supervisors to meet departmental goals. * Identify and document non-conforming products. * Initiate and manage Non-Conformance Reports (NCRs). * Ensure all NCRs are resolved before finalizing inspections. * Use precision and non-precision gauges, meters, and tools to verify product compliance. What You Bring: * High school diploma or GED. * 1+ year of experience in quality processes and Quality Management Systems (preferred). * 1+ year of experience with precision metal fabrication measurement tools (preferred). * Proficiency with precision measuring equipment (e.g., calipers, micrometers, paint mil gauges, hardness testers, CMM, optical comparators, etc.). * Strong organizational skills and ability to work independently. * Effective written and verbal communication skills across departments. * Ability to interpret and apply ISO and Quality System documentation. * Quick learning ability with various test and measurement equipment. * High attention to detail and accuracy. * Solid math and geometry skills. * Proficiency in Microsoft Office (Word, Excel, etc.). Pay Transparency nVent's pay scale is based on the expected range of base pay for this job and the employee's work location. Employee pay within this range will be based on a combination of factors including knowledge, skills, abilities, experience, education, and performance. Where federal, state, or local minimum wage requirements exist, employee pay will comply. Shift: Multiple shifts open Friday - Sunday, Saturday - Monday, Saturday/Sunday Compensation Range: $21.34-$31.88 WE HAVE: * A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day * nVent is a leading global provider of electrical connection and protection solutions. We believe our inventive electrical solutions enable safer systems and ensure a more secure world. We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world's most sensitive equipment, buildings and critical processes. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation. * Our principal office is in London and our management office in the United States is in Minneapolis. Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE. Learn more at ************** * Commitment to strengthen communities where our employees live and work * We encourage and support the philanthropic activities of our employees worldwide * Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money * Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: * Innovative & adaptable * Dedicated to absolute integrity * Focused on the customer first * Respectful and team oriented * Optimistic and energizing * Accountable for performance * Benefits to support the lives of our employees Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for eligible full-time employees that includes: * Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. * A 401(k) retirement plan and an employee stock purchase plan - both include a company match. * Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth.

Join a Team Where Quality Matters-and So Do You Quality Inspector | Huntington Beach, CA | 8 pm - 4:30 am Are you dependable, detail-oriented, and passionate about quality? Join a company where your skills have a direct impact on delivering cutting-edge technology to global customers. Family-owned for over 75 years, Precision Resource is a leading global supplier of precision metal components and assemblies using a fineblank production method. We provide solutions to quality, cost and production challenges for market-leading customers in industries such as automotive, heavy duty, medical, aerospace, electronics, tools, hardware, military and defense. Why Join Precision Resource? Comprehensive benefits: health, dental, vision, and life insurance 401(k) with match and profit sharing Annual bonus based on division profitability Paid time off including vacation and flexible paid holidays Wellness and Employee Assistance Programs Tuition reimbursement and paid training Work with an established team of long-term employees Learn more: ********************************** About the Role We're looking for a Quality Inspector who brings precision, focus, and pride to their work. In this role, you will inspect and test incoming materials and in-process and finished parts to ensure compliance with our high standards and customer requirements. You'll work closely with production teams and play a critical part in identifying and stopping non-conforming products. This position will work from 8 pm - 4:30 am to support the 2nd and 3rd Shifts. Key Responsibilities: Inspect raw materials, in-process products, and final assemblies per control plans Perform measurements using calipers, micrometers, gauges, and advanced equipment (CMM) Maintain accurate inspection records and quality logs Communicate effectively with operators and supervisors to ensure quality standards are met Document and report any non-conformances and take appropriate corrective action Ensure cleanliness and order in QC areas Exercise authority to stop production when necessary to maintain quality What You Bring: High school diploma or equivalent 2-5 years of quality inspection experience in a metal stamping or machining environment Proficiency in using precision measuring tools and equipment Strong attention to detail and commitment to quality Reliable, proactive, and collaborative approach Join a company that values integrity, precision, and teamwork. Help us continue delivering the high-quality components that power industries worldwide. To conform to U.S. Government export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S. or protected individual as defined by ITAR (22 CFR §120.15). Precision Resource is an equal opportunity employer, M/F/D/V.

The QC Inspector's primary responsibility is to verify conformance of product to customer requirements and specifications through product inspection by 100% visual and/or dimensional measurement and product testing as well as the required secondary operations. Responsibilities: Inspection of product for visual defects via unaided eye or some magnification Inspection of product for dimensional specifications using contact and non contact measurement equipment Trimming of product to remove excess flash Perform required secondary operations such as part washing, drying, packaging Documentation of inspection results Qualifications: must be able to perform each essential duty satisfactorily Understanding the importance of product conformity Ability to read and write in English and/or Spanish Understand lot number identification and traceability Organized, neat and meticulous Able to perform repetitive tasks efficiently Good communication and interpersonal skills Basic math skills Perform other duties, as required Previous inspection experience is preferred Minimum of High School level of education is required Ability to handle moderate lifting, no greater than 50 lbs

Inspects, measures, sorts and samples machined, fabricated and assembled parts for deviations from specifications, defects and damage. Utilizes precision measuring instruments and complex measurement equipment. Essential Functions: Analyze and interpret technical data including engineering drawings, source control drawings, data, manuals, and other materials to determine specifications, inspection procedures and determine proper measuring instruments required. Measure and document dimensions of products to verify conformance to drawings or specifications using measuring instruments such as rulers, calipers, gauge pins, micrometers or other measuring equipment. Inspect or measure materials, products, and production work for conformance to drawings and specifications. Visual inspection with and without microscope. Reject and document products, materials, and equipment not meeting specifications. Notify supervisors and other personnel of production problems and assist in identifying and correcting these problems. Discuss inspection results with those responsible for products and suggest possible corrective actions. Document inspection results and process jobs in the appropriate sections of our ERP system. Ability to create and update inspection reports from engineering drawings and other specifications. Ability to learn to operate complex inspection equipment such as Optical Comparator, CMM and Vision Inspection Systems. Qualifications Competencies: Strong verbal and written communication skills, including proficiency in PC-based applications and Microsoft Office. Excellent attention to detail. Strong math skills to determine sampling quantities based on lot size and interpret dimensional tolerances. Ability to use basic hand measuring instruments such as calipers and micrometers. Effective time management skills. Familiarity with basic Geometric Dimensioning and Tolerancing (GD&T). Education/Experience: High School Diploma, GED, or equivalent experience. Minimum 2-3 years of related work experience, or a combination of relevant training and experience. Preferred Qualification: Additional academic coursework or training in Quality/Inspection. Certification by the American Society for Quality (ASQ) as a Quality Inspector (CQI). Supervisory Responsibility: This position has no supervisory responsibilities Work Environment: While performing the duties of this job, the employee is frequently exposed to airborne particles, moving mechanical parts and vibration. The noise level in the work environment and job sites is considered moderate. Physical Demands: Requires regular, predictable, attendance and punctuality. Requires prolonged periods or sitting, occasional standing, stooping, bending and reaching and repetitive hand movements. Must have the ability to routinely lift objects up to 30lbs and occasionally lift objects up to 50 pounds with assistance. Requires eye-hand coordination and dexterity sufficient to operate machinery and computer equipment. Requires normal range of hearing and vision, including color vision. Must be mentally adaptable/flexible in dealing with a variety of people/situations. Must be able to analyze cause of interpersonal conflict and resolve complex issues in a positive and professional manner. Emotional stability and personal maturity are important attributes for this position. May be required to work outside or normal business hours. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Metrea is a defense company dedicated to translating commercial innovation into solutions for the hardest problems in national security. With deep mission expertise, Metrea focuses on delivering effects-as-a-service across Aerospace, Electromagnetic & Cyber, Digital & Synthetic domains via its capability groups. Metrea also consists of six support groups (Operations, People, Finance, Legal, Strategy, and Solutions) that guide the development of specific capabilities that Metrea's files (product, projects, programs, etc) leverage to achieve their targets. Group Overview Air Mobility Group (AIRMOB) is responsible for developing and delivering Metrea's aerial refueling (AAR) capabilities, ensuring the readiness and operational effectiveness of the tanker fleet. AIRMOB oversees fleet management, maintenance, and airworthiness, working to sustain and enhance refueling operations. It manages the integration of new processes and technologies, ensuring that tanker aircraft remain mission-ready through effective logistics, maintenance oversight, and regulatory compliance. By coordinating across various teams, AIRMOB ensures the fleet meets both current and future operational needs, supporting a range of specialized air mobility missions. Position Summary Inspectors are directly responsible to the Head of Airworthiness for ensuring that all maintenance performed on Company aircraft, engines, appliances, and accessories is accomplished in accordance with approved Aircraft Technical Orders, Company programs, Contract requirements and FAA Regulations to maintain a continuous state of airworthiness. Inspectors ensure that safety is the first consideration in Quality Control and Maintenance Departments. Role and Responsibilities * Accomplish aircraft inspections, by the applicable maintenance program specifications, procedures, and criteria to detect and document discrepant or non-airworthy conditions. * Ensure all special inspections are completed and documented correctly in the maintenance records. * Perform required inspections (IPI and/or RII) on items as listed in technical/company manuals and following procedures listed in the GMM/technical data. * Monitors workmanship and materials to verify that the Company, NAVAIR, and FAA rules, regulations, and standards are complied with. * Ensure that aircraft modifications or component changes follow maintenance manual procedures or approved technical data procedures. * Ensure all required inspection items (RII) are completed and documented properly, and Instructions for Continued Airworthiness (ICA) have been received, reviewed, and approved before any aircraft modification action. * Perform receiving inspections of newly purchased, repaired, overhauled parts or continued service components and hardware to ensure proper documentation from approved vendors, absence of shipping damage, proper packaging, protection, and airworthiness certification. * Ensure assistance in the classification of repairs and alterations in relation to Major or Minor repairs. * Reviews all maintenance entries in the aircraft maintenance records/MIS, initiating procedural error notices as necessary to correct incomplete or deficient paperwork. * Monitors/audits aircraft inspection reports, log pages, and records for accuracy and completeness of entries before being sent to the Aircraft Records Department. * Conducts routine and unscheduled audits of aircraft work packages, including checks/inspections forms, log pages, routines and non-routines, modification orders, etc., to ensure completion, correctness, and use of appropriate references to approve data in all entries and forms. * Reviews all Deferred and Carry-Over Items. * Monitors the Company Precision Measuring Equipment Program for compliance. * Specific KC-135 experience is highly desirable. Skills and Experience Education: B.A./B.S. degree from a four-year college or university in a related field and/or a combination of education and related experience. * Formal training as a lead auditor. Experience: * Five (5) years' experience in an aviation administration function dealing with Quality matters. * Experience performing internal & external audits. * Experience in an aviation-centric Quality Management System (QMS). * Knowledge and experience with the implementation of QMS. * Knowledge of all areas of aircraft QMS, AS9100, and AS9110. * Knowledge of external agencies (including FAA, NTSB, ICAO, EASA, etc.) * Leading Quality Management Reviews. * Prepare and deliver presentations to senior leadership. * Perform internal and external audits. * Demonstrate ability to act as a Quality Ambassador for the organization, both internally and externally. * Manage a Quality program with a focus on continuous improvement. * Graduate from a formal auditor's course with accreditation. * Understand aviation-related quality assurance programs. * Prior military/contractor aviation support experience. * Specific KC-135 experience is highly desirable. Additional Eligibility Qualifications * Must be able to accomplish all duties with little or no assistance. * Must have a good command of the English language, both oral and written. Computer Skills: Proficient in Microsoft Office (Word, Excel, Access, PowerPoint, Project, and Visio). Certificates: * Must have - FAA A&P Certificate * Valid Driver's License * Current US Passport Our Culture Metrea's single core value, "rooted in humility," is supported by four key attributes: entrepreneurial, systematic, discerning, and over-deliver. These attributes, combined, form our Teammate Firmware, our culture. We explore these attributes during the hiring process when we grow our teams and continually support the growth of our culture. We are a hyper-collaborative, dynamically hierarchical organization united by a passion for what we do, how we do it, who we do it with, and who we do it for. Benefits Medical insurance options Dental and vision insurance Retirement plan eligibility Enhanced maternity leave Work Authorization / Security Clearance The employee must be a US citizen. The employee must be able to hold and maintain a Secret (or higher) Clearance Level. AAP/EEO Statement Metrea Strategic Mobility is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law. Position Type and Expected Hours of Work This is a full-time non-exempt position with typical working hours of Monday through Friday, 7:00 a.m. to 4:00 p.m. Hours and work shifts may change in accordance with department and business needs. Exempt Employees must have the ability to be on-call and available, as business needs require. Work Location Metrea Strategic Mobility 17301 Heacock Street Moreno Valley, CA 92551 Work Environment This job operates within flightline, industrial, and business office locations. This role routinely uses standard office equipment, computers, iPads, phones, photocopiers, filing cabinets, and aircraft inspection devices such as flashlights, magnifying lenses, and cameras. Travel Travel requirements may be up to 25% with potential for 45-60 consecutive days working in India.

Metrea is a defense company dedicated to translating commercial innovation into solutions for the hardest problems in national security. With deep mission expertise, Metrea focuses on delivering effects-as-a-service across Aerospace, Electromagnetic & Cyber, Digital & Synthetic domains via its capability groups. Metrea also consists of six support groups (Operations, People, Finance, Legal, Strategy, and Solutions) that guide the development of specific capabilities that Metrea's files (product, projects, programs, etc) leverage to achieve their targets. Group Overview Air Mobility Group (AIRMOB) is responsible for developing and delivering Metrea's aerial refueling (AAR) capabilities, ensuring the readiness and operational effectiveness of the tanker fleet. AIRMOB oversees fleet management, maintenance, and airworthiness, working to sustain and enhance refueling operations. It manages the integration of new processes and technologies, ensuring that tanker aircraft remain mission-ready through effective logistics, maintenance oversight, and regulatory compliance. By coordinating across various teams, AIRMOB ensures the fleet meets both current and future operational needs, supporting a range of specialized air mobility missions. Position Summary Inspectors are directly responsible to the Head of Airworthiness for ensuring that all maintenance performed on Company aircraft, engines, appliances, and accessories is accomplished in accordance with approved Aircraft Technical Orders, Company programs, Contract requirements and FAA Regulations to maintain a continuous state of airworthiness. Inspectors ensure that safety is the first consideration in Quality Control and Maintenance Departments. Role and Responsibilities Accomplish aircraft inspections, by the applicable maintenance program specifications, procedures, and criteria to detect and document discrepant or non-airworthy conditions. Ensure all special inspections are completed and documented correctly in the maintenance records. Perform required inspections (IPI and/or RII) on items as listed in technical/company manuals and following procedures listed in the GMM/technical data. Monitors workmanship and materials to verify that the Company, NAVAIR, and FAA rules, regulations, and standards are complied with. Ensure that aircraft modifications or component changes follow maintenance manual procedures or approved technical data procedures. Ensure all required inspection items (RII) are completed and documented properly, and Instructions for Continued Airworthiness (ICA) have been received, reviewed, and approved before any aircraft modification action. Perform receiving inspections of newly purchased, repaired, overhauled parts or continued service components and hardware to ensure proper documentation from approved vendors, absence of shipping damage, proper packaging, protection, and airworthiness certification. Ensure assistance in the classification of repairs and alterations in relation to Major or Minor repairs. Reviews all maintenance entries in the aircraft maintenance records/MIS, initiating procedural error notices as necessary to correct incomplete or deficient paperwork. Monitors/audits aircraft inspection reports, log pages, and records for accuracy and completeness of entries before being sent to the Aircraft Records Department. Conducts routine and unscheduled audits of aircraft work packages, including checks/inspections forms, log pages, routines and non-routines, modification orders, etc., to ensure completion, correctness, and use of appropriate references to approve data in all entries and forms. Reviews all Deferred and Carry-Over Items. Monitors the Company Precision Measuring Equipment Program for compliance. Specific KC-135 experience is highly desirable. Skills and Experience Education: B.A./B.S. degree from a four-year college or university in a related field and/or a combination of education and related experience. Formal training as a lead auditor. Experience: Five (5) years' experience in an aviation administration function dealing with Quality matters. Experience performing internal & external audits. Experience in an aviation-centric Quality Management System (QMS). Knowledge and experience with the implementation of QMS. Knowledge of all areas of aircraft QMS, AS9100, and AS9110. Knowledge of external agencies (including FAA, NTSB, ICAO, EASA, etc.) Leading Quality Management Reviews. Prepare and deliver presentations to senior leadership. Perform internal and external audits. Demonstrate ability to act as a Quality Ambassador for the organization, both internally and externally. Manage a Quality program with a focus on continuous improvement. Graduate from a formal auditor's course with accreditation. Understand aviation-related quality assurance programs. Prior military/contractor aviation support experience. Specific KC-135 experience is highly desirable. Additional Eligibility Qualifications Must be able to accomplish all duties with little or no assistance. Must have a good command of the English language, both oral and written. Computer Skills: Proficient in Microsoft Office (Word, Excel, Access, PowerPoint, Project, and Visio). Certificates: Must have - FAA A&P Certificate Valid Driver's License Current US Passport Our Culture Metrea's single core value, “rooted in humility,” is supported by four key attributes: entrepreneurial, systematic, discerning, and over-deliver. These attributes, combined, form our Teammate Firmware, our culture. We explore these attributes during the hiring process when we grow our teams and continually support the growth of our culture. We are a hyper-collaborative, dynamically hierarchical organization united by a passion for what we do, how we do it, who we do it with, and who we do it for. Benefits Medical insurance options Dental and vision insurance Retirement plan eligibility Enhanced maternity leave Work Authorization / Security Clearance The employee must be a US citizen. The employee must be able to hold and maintain a Secret (or higher) Clearance Level. AAP/EEO Statement Metrea Strategic Mobility is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law. Position Type and Expected Hours of Work This is a full-time non-exempt position with typical working hours of Monday through Friday, 7:00 a.m. to 4:00 p.m. Hours and work shifts may change in accordance with department and business needs. Exempt Employees must have the ability to be on-call and available, as business needs require. Work Location Metrea Strategic Mobility 17301 Heacock Street Moreno Valley, CA 92551 Work Environment This job operates within flightline, industrial, and business office locations. This role routinely uses standard office equipment, computers, iPads, phones, photocopiers, filing cabinets, and aircraft inspection devices such as flashlights, magnifying lenses, and cameras. Travel Travel requirements may be up to 25% with potential for 45-60 consecutive days working in India.

Elevate Your Career as a Quality Control Receiving Inspector in Huntington Beach, CA! - Urgently hiring 1st Shift QC Receiving Inspector in Huntington Beach! Job Title: Quality Control Receiving Inspector Pay: $26 - $27 per hour Hours: 6:30 AM - 3:00 PM Start Date: ASAP Looking for a hands-on role in a growing company? Join Helpmates, a leader in quality assurance within the aviation industry, as a Quality Control Receiving Inspector in Huntington Beach, CA and make an impact every day. As a Quality Control Receiving Inspector, you'll play a key role in ensuring the highest standards of quality for aviation parts, directly contributing to the safety and reliability of the industry. You'll work closely with engineering teams to deliver results that make a difference. What You'll Do: As a Quality Control Receiving Inspector, you will be responsible for: Interpreting engineering drawings and specifications to ensure accurate inspections. Utilizing precision measuring tools like calipers, micrometers, height gauges, and indicators for thorough assessments. Conducting visual and dimensional inspections for incoming aviation parts. Performing receiving and first article inspections to guarantee compliance with industry standards. Preparing detailed inspection reports and nonconformance documentation. Identifying root causes of any discrepancies and contributing to corrective actions. Reviewing supplier certifications for compliance with specified requirements. Collecting and analyzing data for statistical assessments related to quality metrics. Understanding and interpreting tolerances, as well as geometric and positional requirements. Traveling as needed to support supplier audits or inspection programs. What You'll Bring: The ideal candidate for this role will have: Education: High School Diploma or GED equivalent is required; an Associate's Degree is desired. Experience: Open to both entry-level candidates and those with prior experience in quality control. Skills: Experience with raw materials, electrical, machined components, crush core panels, and/or injection molded parts is preferred. Why Join Us in Huntington Beach? Supportive Team Culture: Work alongside a talented team dedicated to quality and excellence. Career Growth Opportunities: Expand your skills and advance in a thriving company. Competitive Pay and Great Benefits: Enjoy industry-leading compensation and comprehensive health benefits. Affordable Health and Prescription Coverage: Receive health benefits with no waiting period once hired permanently. Retirement Plan: Access to a 401k or Pension plan. Location & Schedule: This position is on-site in Huntington Beach, CA and offers 1st shift hours from 6:30 AM to 3:00 PM. Ready to Take the Next Step? If you're ready to start a rewarding career as a Quality Control Receiving Inspector in Huntington Beach, apply today or contact our recruiting team to learn more. Don't wait, we're hiring now!

Quality Inspector 1st Shift - Riverside, CA Portables M-F 6:30AM-3PM $20.12-$23.74Hr LUXFER GAS CYLINDERS is the world's largest manufacturer of high-pressure composite cylinders. We have a proven record for dependability and safety. American Made products that save the lives of firefighters and first responders!! JOB DESCRIPTION: You will perform inline quality inspections, checks, and tests during the manufacturing process. Records defects on a daily basis and may make recommendations for improving processes. As a Quality Inspector, you will work closely with Production to identify nonconforming materials on the shop floor. ACTIVITIES: The main activities of the position include but are not limited to the following: Responsible for inspecting materials for quality and defects. Inspects cylinders internally, externally, and dimensionally to ensure they meet all internal and external customer requirements. Perform in-process inspection and final inspection. Identify non-conforming material and notify the Quality Lead or Team Leader to generate non-conforming material reports. Generate rework tags and send nonconforming material to various areas for rework. Give feedback from personal experiences on the shop floor to help improve Production/Quality processes and possibly assist in implementing and testing out these new processes. QUALIFICATION/REQUIREMENTS: Able to lift product and stand for extended periods of time. Ability to read Pi-Tape, Calipers, Depth Gauge, and a weight scale. Requires a high school diploma or its equivalent and 2 years of related experience. Familiar with standard concepts, practices, and procedures within the quality function. Relies on experience and judgment to plan and accomplish goals. Demonstrated ability to troubleshoot and problem solve. At least 18 years old Able to pass a Drug Test ** The acceptable outcome of a Background Check **We are committed to a safe, drug-free work environment and pre-employment drug screening, physical and background checks are required prior to starting. Candidates must be authorized to work in the US. Luxfer Cylinders is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act) with respect to employment opportunities. Women, minorities and veterans are encouraged to apply. NOTICE FOR CALIFORNIA RESIDENTS Pursuant to the California Privacy Rights Act, if you are a California resident, you have the right to know the categories of personal information we collect and how it's used. Please visit the site below to access our California Privacy Rights Act Policy for candidates and employees. ******************************************************************************************************************************************

Quality Inspector 1st Shift - Riverside, CA Portables M-F 6:30AM-3PM $20.12-$23.74Hr LUXFER GAS CYLINDERS is the world's largest manufacturer of high-pressure composite cylinders. We have a proven record for dependability and safety. American Made products that save the lives of firefighters and first responders!! JOB DESCRIPTION: You will perform inline quality inspections, checks, and tests during the manufacturing process. Records defects on a daily basis and may make recommendations for improving processes. As a Quality Inspector, you will work closely with Production to identify nonconforming materials on the shop floor. ACTIVITIES: The main activities of the position include but are not limited to the following: * Responsible for inspecting materials for quality and defects. * Inspects cylinders internally, externally, and dimensionally to ensure they meet all internal and external customer requirements. * Perform in-process inspection and final inspection. * Identify non-conforming material and notify the Quality Lead or Team Leader to generate non-conforming material reports. * Generate rework tags and send nonconforming material to various areas for rework. * Give feedback from personal experiences on the shop floor to help improve Production/Quality processes and possibly assist in implementing and testing out these new processes. QUALIFICATION/REQUIREMENTS: * Able to lift product and stand for extended periods of time. * Ability to read Pi-Tape, Calipers, Depth Gauge, and a weight scale. * Requires a high school diploma or its equivalent and 2 years of related experience. * Familiar with standard concepts, practices, and procedures within the quality function. * Relies on experience and judgment to plan and accomplish goals. * Demonstrated ability to troubleshoot and problem solve. * At least 18 years old * Able to pass a Drug Test * The acceptable outcome of a Background Check We are committed to a safe, drug-free work environment and pre-employment drug screening, physical and background checks are required prior to starting. Candidates must be authorized to work in the US. Luxfer Cylinders is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act) with respect to employment opportunities. Women, minorities and veterans are encouraged to apply. NOTICE FOR CALIFORNIA RESIDENTS Pursuant to the California Privacy Rights Act, if you are a California resident, you have the right to know the categories of personal information we collect and how it's used. Please visit the site below to access our California Privacy Rights Act Policy for candidates and employees. ******************************************************************************************************************************************

The Quality Inspector is responsible for performing incoming and in‑process inspections to ensure all purchased and manufactured components meet required specifications. This includes using precision measurement tools, interpreting technical drawings, maintaining accurate inspection records, and supporting both QA and manufacturing teams in a regulated environment. The role also requires proper handling, identification, and documentation of materials. This position is onsite in Irvine or Tustin, CA, 5 days per week (possible Saturday work) with 1-3 hours of required overtime per day. Day‑to‑Day Responsibilities Perform incoming and in‑process inspections on manufactured and purchased components per drawings and control plans. Use properly calibrated gages and precision measurement tools (micrometers, verniers, dial calipers, hardness testers, surface testers, preset gauges). Prepare and maintain component history records and incoming part documentation. Ensure all materials are properly identified, documented, and segregated. Process and segregate non‑conforming materials per procedure. Support QA with technical assistance on measurement systems. Provide assistance to manufacturing teams as needed. Work with and understand ESD (electrostatic discharge) devices. Maintain a safe and compliant work environment. Perform other duties as assigned. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements High school diploma. Minimum 2 years of QA/QC experience with on‑the‑job training. Extensive hands-on experience using precision measuring tools for high‑tolerance components. Strong proficiency in blueprint reading and interpreting tight tolerances. Familiarity with GD&T (Geometric Dimensioning & Tolerancing). Ability to perform basic math (whole numbers, fractions, decimals). Familiarity with machine shop environments and processes. Ability to ensure product quality in a highly regulated environment and maintain Device Master History record integrity. PC skills including Word, Excel, Access, and exposure to ERP/manufacturing data systems. Technical training or relevant certifications. Experience operating a CMM; ability to program CMM equipment (training may be provided). Broader understanding of manufacturing data systems or advanced inspection tools.

Responsibilities: Perform visual and dimensional checks various incoming products (sheet metal, PCBAs or CCAs, Printed Boards or PCBs, Conformal Coating, Labels or markings, Cables, Harnesses; COTS items, and etc.) at various stages (Incoming, RMA, In-process, Final, Shipping, etc.) Test and or verify products for a variety of characteristics such as functional performance mechanically or electrically, or chemical properties or composition. Perform First Article Inspection and prepare FAIRs as needed. Record Inspection findings and generate NCMR's, DCRs' and ERRs' as needed. Communicate with the Project Mangers or QA for any possible delays and/or resolutions of any urgent and high priority jobs. Required: Extensive working knowledge of IPC-A-600, J-STD-001 and IPC-A-610, and IPC-A-620. Prior or current IPC training and/or certification is preferred. Ability to read, comprehend and interpret engineering drawings and documentation such as electrical schematic diagrams, mechanical and assembly drawings, BOM, and assembly instructions, and etc. Ability to adjust in fast-paced dynamic operations. Ability to apply concepts of basic algebra and geometry such as decimals, fractions, length, proportions, percentages, area, circumference, and volume. Ability to confer with management or engineering staff to determine quality and reliability standards or applicable requirements. Ability to use mechanical measurement tools such as calipers, micrometers, and electrical measurement tools, etc. Ability to operate computers and able to use computer applications and files such Microsoft Word and Excel, Adobe PDF, Outlook emails, and other databased platforms. Detail oriented, dedicated and self-motivated. Ability to work under minimum supervision. Work well in a team environment. Must have good interpersonal skills.

Quality Control Inspector II is a hands-on role, whose primary responsibility consists of the inspection and measurement of products to ensure that they are in spec at the point of production. POSITION DUTIES/RESPONSIBILITES Able to read different measuring gages, understanding of gage calibration, receiving inspection of components, validate process and test reports, In-process inspection, generate Nonconformance reports, read travelers, work with industry and customer specifications, understands QMS function, review P.O. for shipping orders to ensure correct delivery address, prepare paperwork for shipping of product, Customer source inspection, verification of resin mix, understanding of composite inspection, train new inspectors, develop performance metrics, complete corrective action reports, work with supplier quality issues, perform internal audits. Qualifications 5 years minimum experience in Mechanical Inspection NDT Ultrasonic Testing experience, Level II preferred Experience with AS 9100 and ISO 9001 ROMER Arm experience, PCDMIS, Verisurf, Polyworks Use calipers, micrometers, height gages and scales Blueprint reading GD&T, computer proficient Generate FAIR per AS9102Must be able to meet ITAR eligibility PHYSICAL DEMANDS N (Not Applicable) Activity is not applicable to this position.O (Occasionally) Position requires activity up to 33% of the time (0 - 2.5+ hrs/day) F (Frequently) Position requires activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day) C (Constantly) Position requires activity more than 66% of the time (5.5+ hrs/day) Physical Demands Lift/Carry 10 lbs or less F 11-20 lbs F 21-50 lbs F 51-100 lbs O Over 100 lbs N Push/Pull 12 lbs or less F 13-25 lbs F 26-40 lbs F 41-100 lbs O Other Physical Requirements Must be able to lift and carry items weighing up to thirty-five (35) pounds on a repetitive basis. Must be able to stand, walk, bend, squat, climb, kneel, twist, and work at heights on an intermittent basis for up to twelve (12) hours. Requires hand manipulation including simple grasping, pushing, and pulling materials. Must be able to reach and work above and below the shoulder level. Must be able to work with and around forklifts and hazardous machinery. Must be able to remain in a stationary position such as working at a desk on a computer for prolonged periods of time. Visual acuity skill to detect any flaws in the parts being inspected. Ability to wear Personal Protective Equipment (PPE) - Required Safety Glasses

Job Title: Quality Control Inspector (Aerospace Job Shop) Department: Quality Assurance Reports To: Quality Manager Employment Type: Full-Time We are seeking an experienced Quality Control Inspector with a minimum of 5+ years in aerospace manufacturing to join our fast-paced job shop in Corona, CA. This role is responsible for performing in-process, first article, and final inspections using advanced measurement tools, including portable CMM equipment such as a Romer Arm. The ideal candidate must be highly proficient in GD&T, blueprint interpretation, and AS9100 requirements. Key Responsibilities Inspection & Measurement Perform first article, in-process, and final inspections on aerospace components in accordance with customer, engineering, and industry standards. Operate and program Romer Arm or similar portable CMM equipment to perform high-accuracy dimensional inspections. Use precision measurement tools including calipers, micrometers, height gauges, surface plates, bore gauges, and optical comparators. Interpret and apply Geometric Dimensioning & Tolerancing (GD&T) to inspect complex features and assemblies. Document inspection results and complete required forms, reports, and digital records. Quality Assurance Ensure products meet all customer specifications, engineering drawings, and AS9100/ISO quality standards. Identify, document, and report nonconformances; assist in root cause analysis and corrective actions. Support the creation and maintenance of First Article Inspection Reports (FAIRs) to AS9102 standards. Verify certifications, material traceability, and documentation packages for final release. Manufacturing Support Work closely with machinists, engineers, and production staff to resolve quality issues on the shop floor. Provide feedback on manufacturability, drawing interpretation, and potential process improvements. Assist in developing inspection methods and fixturing when required. Qualifications Experience 5+ years of Quality Control/Inspection experience in an aerospace or precision machining environment. Strong, hands-on experience with Romer Arm / portable CMM inspection tools. Proven expertise in GD&T (ASME Y14.5) and interpreting complex aerospace drawings. Education High school diploma or GED required; technical training or certifications in inspection, CMM, or aerospace manufacturing preferred. Technical Skills Proficiency with: Portable CMM systems (Romer, Faro, or equivalent) GD&T application and interpretation Reading complex blueprints and 3D models Standard inspection equipment (manual and digital) AS9100 & AS9102 First Article requirements Experience with ERP/MRP systems and digital inspection software a plus. KPG123

Job Description Aerospace exp required Job Posted by ApplicantPro

Job DescriptionQuality Control InspectorAre you passionate about ensuring the highest quality standards in the biotech industry? We are seeking a skilled and detail-oriented Quality Control Technician to join our reputable biotech diagnostic company. Location: CarlsbadPay Rate: $18 - $19.80/hr, contract Both 1st shift and 2nd shift available, Monday-Friday and weekends as needed Key Responsibilities: Perform routine and special inspections for visual, dimension, and functional assessments, ensuring adherence to inspection instructions. Document and report inspection findings, monitoring corrective actions for any identified issues. Execute product identification and traceability activities as required. Review, approve, and maintain Device History Records for all manufacturing functions, in compliance with relevant standards and regulations. Apply in-depth knowledge of QSRs/ISO and regulatory guidelines to daily tasks, ensuring quality standards are upheld. Monitor and comply with customer specifications and company quality assurance policies. Ensure proper calibration and maintenance of inspection equipment. Essential Functions: Conduct and document hourly inspections. Perform and document line clearance procedures. Carry out First Articles and Retention Samples, documenting and filing accordingly. Review, approve, and file documents for completeness and compliance. Work Environment:The work environment encompasses warehouse, laboratory, and manufacturing settings, where handling viral and bacterial hazards, potentially hazardous chemicals, and infectious bodily fluids and samples may occur. Flexible work hours may be required to meet project deadlines. Education, Skills & Experience: Minimum 6 months of Quality Control inspection experience required. Experience with Good Manufacturing Practice (GMP) Experience in a medical device high-volume manufacturing environment is strongly desired. Ability to read, interpret, and follow detailed procedures, instructions, and drawings. Solid understanding of QSRs/ISO standards. Demonstrated team-oriented interaction skills and professional behavior. Proficiency in word processing, data entry, and spreadsheet navigation. Familiarity with basic quality terms, definitions, and concepts. Understanding of traceability (product, material, and calibration). Basic math skills for determining appropriate sample sizes for inspection based on lot sizes. Problem-solving skills to identify processes and standards in need of improvement and initiate appropriate action. If you are driven by a commitment to excellence and have a passion for quality control in the biotech industry, we encourage you to apply. Join our dedicated team and make a significant impact on healthcare by maintaining the highest quality standards in our biotech diagnostic products.

The Quality Control Inspector is responsible for verifying that Solar PV, BESS, and EV projects are installed in compliance with design drawings, codes, standards, and client requirements. This role ensures quality assurance through inspection, documentation, and enforcement of corrective actions.

TempToFT We are hiring Quality Control Inspectors/Testers to join our team in Fountain Valley, CA! LONG TERM ASSIGNMENT!!! ADVANCEMENT OPPORTUNITIES!!! HIRE ON OPPORTUNITIES!!! PAY RATE: $16.00 - $19.00 ( DOE ) SHIFTS AVAILABLE: 1st Shift ( MONDAY - FRIDAY ) 6:00AM - 2:30PM 2nd Shift ( MONDAY - FRIDAY ) 3:00PM - 10:30PM JOB DESCRIPTION: Position Summary: Responsible for assigned jobs/tasks. To complete work in a timely manner with accuracy, and conformance to work instructions, IPC620/designated standards and customer requirements. Additional duties may be assigned by supervisor or department manager. Essential Duties: Execute task as assigned by lead/supervisor and/or manager Verify traveler documentation for accuracy (part numbers, revs, quantities, etc.) Verify documentation for customer inspection / test requirements Conduct inspections / test per instructions and standards Read and understand technical drawings Document all transactions per directions Refer problems or concerns to lead, supervisor or manager Maintain work area clean and organized (FOD free) Advise lead or manager of training, equipment needs and opportunities for improvement. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The essential duties are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions SAFETY EXPECTATIONS Learn and follow all safety requirements. Failure to do so will result in disciplinary action. Maintain a clean and orderly work area. Report to work; healthy and not affected by alcohol, drugs, or other harmful influences Actively participate in safety improvement activities. Report any unsafe practices by coworkers or contractors. Immediately report all injuries and other safety incidents. AUTHORITY Communicating Problems or Opportunities for Improvement to Management for appropriate action. To report documentation requiring correction or improvement. To report any non-conforming product and opportunities for improvement. SUPERVISORY RESPONSIBILITIES: NO LIST CERTIFICATIONS AND TRAINING WHETHER OUTSOURCED OR INTERNAL IF APPLICABLE: Familiarity with IPC-620 / 610 requirements J-STD solder acceptance criteria Familiarity with PKC operating systems (QMS, Work Instructions, ERP, etc.) CORE VALUES: • Our customer's voice is at the center of everything we do. • We are committed to a vibrant, sustainable world. • Our integrity defines our value. • We respect each team member's unique abilities to drive our success. • We win through teamwork. • Our quality defines us. • Our differentiation is through innovation. Our Mission: To actively be the bridge between quality candidates and great employers! We strive to connect each applicant with great opportunities that align their respective skills in industries they are familiar with throughout the country! Who We Are: As part of our team you'll be eligable to receive: • Competitive salaries • Exceptional benefits packages • Flexible Vacation & Paid Time Off • Employer-matched 401(k) plan • Sign On Bonuses • Referral Bonuses • Great Benefits Company Description: Vantage Staffing Solutions has been noted as the fastest growing employment firm in the USA. We have helped both small & large businesses expand there operations by connecting quality job seekers through our partnerships with the best job boards on the web, curated email alerts, award-winning recruitment services, and the world's best Overall Staffing Service. Vantage Staffing Solutions is proud to be an equal opportunity employer and provides equal employment opportunities (EEO) to all employees and applicants without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity or genetics. Positions may be Temp-To-Hire, Direct Hire or Contract Opportunities and are dependent on factors including performance, attendance, safety policy adherence. Category: Staffing, Recruiting, Careers, Jobs, Now Hiring, Pay-Rolling Services, Vendor Management Services and Human Resources Management.