Quality inspector jobs in Oxnard, CA

About Us Haskel, an Ingersoll Rand Company, is a High-Pressure Technology Solutions. We specialize in Air-Driven Liquid Pumps, Air-Driven Refrigerant Pumps, Hydraulic Drive Compressors, Gas Booster Compressor System, BuTech High-Pressure Valves and Hydrogen Valves Fitting and Tubing. Job Summary This role is responsible for ensuring the quality control cell is actively engaged to meet daily customer demand and production schedule. Performs receiving, in-process and/or final inspection of hardware. Conducts complex inspections as defined by quality/inspection plans or per directions of quality management/engineering. Uses a complete range of precision tools and instruments requiring advanced inspection skills and techniques. Ensures that all gauges/tools used are properly calibrated. Identify accurate and efficient means of inspection techniques. Works with general/minimal supervision. Train and provide directions to the Quality Control team under the supervision of the Quality Control Manager. Responsibilities The Quality Team Lead will inspect products by using a variety of inspection tools/devices, work instructions and computer to perform a series of inspections to correctly verify incoming parts, in-process and completed assemblies. Verify supplier material certifications, including special processes, and ensure compliance with quality/PO requirements. Creates supporting documentation (data books, certificates of conformance, etc…) Support disposition of discrepant materials (MRB) in accordance with appropriate quality procedures and maintain low inventory of on-hold parts. Verifies first articles from suppliers and internal departments. Prepares and processes records and reports to document supplier/operations performance. Qualify supplier components and/or systems for assuring conforming product. Adheres to calibrations system of inspection, measuring and test equipment. Applies Statistical Quality Control techniques as directed. Assist with interpretation of drawings, specifications and quality requirements. Properly process goods for outside processing, investigates and evaluates component parts returned and nonconforming product. The Quality Team Lead provides effective training to the quality control cell and ensures safety and quality standards are always maintained. Work with supervisor to manage and prioritize staffing assignments to ensure customer demand and the production schedule are met. Use basic problem-solving skills to ensure stable operation of the quality control cell. Report problems or concerns with quality, processes, equipment, materials and labor to Quality management. Work closely with support staff such as Purchasing/Planning, Manufacturing Engineering, Production Supervisor, Materials/Warehouse to resolve issues. Observe, maintain, coordinate and complete standard work. Update production metrics and facilitate regular team communication. Identify and support continuous improvement efforts with Quality management. Sustain and drive lean manufacturing and 5S activities. Follow documented policies and procedures as designated by the company's Quality System. Basic Qualifications Ability to read and interpret documents such as safety rules, engineering drawings, operating and maintenance instructions, Material Standards, Quality Plans, Control Plans and Inspection Test Plans. Experience with Microsoft Office (Word, Excel, Outlook). Ability to communicate effectively through oral and written communications. Ability to analyze and solve problems. Ability to work with others collaboratively. Strong organizational skills. Preferred Experience leading teams or projects strongly desired. Quality Control experience. Lean manufacturing and continual process improvement experience. Educational Requirements High School diploma or equivalent Five years + of related experience and a minimum of two leading teams. LIP Eligible Role This position is eligible for the LIP (Local Incentive Plan) of up to 4%. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. At Ingersoll Rand, we think and act like owners - of our business, our communities, our planet, and our health too. The Ingersoll Rand benefits program provides you with the tools and resources to take accountability for your health so that we can continue to help make life better. Benefits of employment and include; Medical and Prescription drug plans Wellness and Chronic disease management programs Dental, vision, life/AD&D insurance Short- and Long-term disability Health Savings Account Flexible Spending Account Parental Leave Employee Assistance Program Discount Program Employee Stock Grant 401k plan with a company match 3 weeks of paid vacation and 11 paid holidays throughout the calendar year Voluntary benefits include legal, accident, and critical illness protection

This role is designed for Second Shift. The Quality Technician II supports the Quality Engineering group through processing First Article Inspection (FAI) and Part Approval Process, selective inspection, analysis and processing of internal Nonconformance Reporting (NC) material and other administrative and logistical support duties. Represents the Quality Department in witnessing and documenting UAV flight acceptance test activity. Position Responsibilities Processes inbound or outbound FAI and deliverable submissions accurately and timely including: receipt and analysis of parts and/or supporting documentation; completion of associated records and logs; communication of submission status as needed to QEs, managers, engineers or interested parties; processing of parts after completion; maintaining records and files associated with submissions; and other related tasks. Conducts selective inspection under the direction of the QE group including: receipt and verification of material, completion and maintenance of related documentation, communication of inspection results to concerned parties and processing of material after verification using Agile/Oracle database. Processes internal non-conforming material as needed in support of QE including: retrieval and analysis of material, interpretation of preliminary findings and restatement of problem statements to ensure understanding of problem, processing material through the necessary NC processes, communication of status to concerned parties, maintaining necessary documentation and processing material to internal and external suppliers. Provides general support of QEs including communication, Corrective Action Request processing, product evaluation, and sorting activities under exceptional circumstances, and interfacing with other team members as necessary to complete assigned tasks in support of continuous improvement initiatives using A3, Six Sigma DMAIC forms. Support DCMA Source Inspection process Coordinates with Shipping and Contracts department as needed to ensure timely delivery. Responsible for creating the Final Inspection documentation package including COC, TDR's, etc., and as necessary support internal/external customer inspection. Represents and supports QEs during internal and 3rd party audits regarding the essential functions above and as needed regarding our measurements system and documented system. Develops and maintains process instructions for quality-related activities Works on assignments that are semi-routine in nature Other duties as assigned Basic Qualifications (Required Skills & Experience) High School Diploma or GED equivalent 1 - 2 years of related work experience or equivalent combination of education, training, and experience Demonstrated expertise in mechanical inspection methods and skills including surface plate work, hand tools, and gages, etc. Solid ability to read and understand drawing requirements including a solid understanding of Geometric Dimensioning and Tolerance to ANSI Y14.5 Basic knowledge of FAI validation and verification process requirements Strong computer skills and is proficient in MS Office Suite (Word, Access, PowerPoint, Excel) Basic knowledge of engineering drawings and specification systems Must be able to fill out the necessary flight test documentation Must be able to properly document any/all non-conformances encountered Must have the skills necessary to perform pre and post-flight visual inspections on flight hardware and components. Must possess the skills necessary to remove and replace field replaceable components on aircraft. Will populate excel spreadsheets on a daily basis documenting flight test results Must able to work efficiently in a fast-paced, high-volume environment Required to travel to and from remote flying sites on a daily basis Must have a valid California driver's license and clean driving record Willingness to work overtime also a must Other Qualifications & Desired Competencies 2 year technical degree desired; Quality system courses and/or equivalent experience preferred Aerospace quality management system experience (AS9100DD) and/or internal audit experience is preferred Solid ability to accurately record and manage data, records, files and other documents to support tasks Has an analytical approach to problem solving and high organizational skills as well as effective time management, interpersonal and communication skills Strong ability to manage time and prioritize tasks Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands Ability to work the majority of the time outdoors in varying weather conditions, when needed, during flight test activity (Frequent) Ability to lift up to 50 lbs. and carry/move objects of varying shapes and sizes (Frequent) Regularly required to, stand, sit; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) Clearance Level Clearance Level AeroVironment considers several factors, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

Who we are: C.R. Laurence Co., Inc. (CRL) is the leading full-service provider of architectural metals, glass fittings and professional-grade glazing supplies. Offering more than 60,000 products, we serve the industry from locations throughout North America, Europe, and Australia. We operate our business to the highest standards of design, quality and customer service. The companies and institutions that depend on us impact the growing fields of glass fabrication, construction, architecture, interior design, and automotive. Their positions as leaders in their own industries mean they demand the highest standards from their suppliers. About the Position: We are currently searching for an experienced and analytical Quality Inspector to join our production department. As the Quality Inspector, you will uphold the safety regulations of our company and oversee the production process to guarantee that all our products meet quality expectations. The chosen candidate will perform regular product evaluations, record inspection results, and recommend improvements to the production process. To excel in this role, applicants should demonstrate great attention to detail with technical and math abilities. Responsibilities include, but are not limited to: Perform quality assessments on all incoming material from vendors, outgoing products for shipping and customer complaints. Reject all products and material that fail to meet quality expectations. Read drawings, plans and specifications to understand the requirements of the products and services. Perform Inspection and testing acceptance criteria Measure product dimensions examine functionality and compare the final product to the specifications. Recommend improvements to the production process to ensure quality control. Document inspection outcomes by completing detailed reports and performance records. Teach the production team about quality control concerns to improve product excellence Oversee the production process Resolve quality related issues in a timely manner. Control and maintenance of all quality documentation, such as: creation, review, approval, modification, elimination and distribution. Review, disposition and oversee rework of nonconforming product. Recommend Corrective/ Preventive actions to eliminate the causes of actual or potential non Qualification Requirements: A minimum of 1-year experience in a similar role High School diploma or equivalent qualification Certification in quality control is preferred Good math and technical skills Understanding of quality control standards and testing techniques. Basic computer skills (excel & word) Dependable, organized with ability to prioritize effectively Good communication skills Ability to problem solve, multi-task, attention to detail and work independently What CRL Offers You Highly competitive base pay Paid time off 10 Holidays (inclusive of 2 floating holidays) Market competitive 401(k) match Industry-leading medical, dental, and vision benefits Short-term and long-term disability coverage Life Insurance Employee discounts Health and wellness programs A culture that values opportunity for growth, development, and internal promotion Hourly: $21.15 - 26.44 We are excited to be an Equal Opportunity Employer at C.R. Laurence. We are actively seeking job applicants who reflect a broad representation of differences, including race, ethnicity, religion, sex, sexual orientation, gender identity/expression, physical ability, neurodiversity, age, veteran, family and economic status and background, geographical background and status, and perspective. We believe that the best companies reflect the incredible diversity in viewpoints, backgrounds, and identities of the world in their staffs, and are committed to inclusive hiring across departments and levels. C.R. Laurence Co., Inc. (CRL) is an E-Verify Employer.

Now Hiring: Quality Inspectors - Aerospace Manufacturing Are you an experienced Quality Inspector looking to advance your career in a high-precision aerospace machine shop? Join our team, where product integrity, process excellence, and safety are top priorities in a fast-paced, technical environment. We are seeking mid- to advanced-level Inspectors with a strong background in machined metal aerospace or military parts, proficiency in GD&T, and knowledge of AS9100, AS9102, and ANSI Y14.5 standards. Key Responsibilities Perform in-process, first-article (AS9102), and final inspections of precision-machined aerospace components Use tools such as micrometers, calipers, thread gauges, height gauges, CMMs, profilometers, and optical comparators Interpret complex blueprints and technical drawings using advanced GD&T (ANSI Y14.5) Record results in MRP systems and support NCR, root cause analysis, and CAPA activities Lead and mentor junior inspectors Support receiving inspections, traceability verification, and adherence to FOD, PPE, and cleanroom protocols Ensure compliance with AS9100, ITAR, and internal quality systems Requirements Minimum 3 years inspecting machined aerospace or military parts (metal only) Proficiency in GD&T, dimensional inspection, and visual inspection Knowledge of AS9100, AS9102, and ANSI Y14.5 standards CMM programming experience (PC-DMIS) a plus Experience with 1factory, FileMaker, or similar QMS/MRP systems Strong shop math, problem-solving, and communication skills in English Dependable, quality-focused, able to work independently and in a team Must pass annual visual acuity and color perception tests (NDT standards) U.S. person required for ITAR compliance Shifts Available Full-Time, Second Shift: Monday-Friday, 3:00 PM - 11:30 PM Initial training will take place on Day Shift: Monday-Friday, 7:00 AM - 3:30 PM Pay & Benefits $22.50-$39.50 per hour (I, II, & III) Medical, dental, vision, life insurance Disability, vacation, sick pay 401k Physical Demands Work primarily in an open warehouse environment with exposure to temperature changes, noise, vibrations, fumes, and chemicals Frequent use of wrists, hands, and fingers Extended periods of sitting, standing, walking, and bending Occasionally lift, carry, push, or pull up to 50 lbs ITAR Requirement This position requires the use of information subject to the International Traffic in Arms Regulations (ITAR). The candidate must be a U.S. person within the meaning of ITAR. ITAR defines U.S. persons as U.S. citizens, lawful permanent residents (i.e., Green Card holders), and some refugees. MGI is an equal opportunity employer. Ready to apply? Join our team today and take your aerospace inspection career to the next level! NO RECRUITERS PLEASE

JOB TITLE: Quality Inspector JOB TYPE: 6 month Contract-to-Direct Hire/Fulltime ESSENTIAL FUNCTIONS: Able to perform all duties of a General Inspector Must be capable of making own set-ups for inspection, including setups for checking Form Tolerances, Orientation Tolerances, Runout Tolerances, Profile Tolerances, Location Tolerances Must have an excellent understanding of ASME Y14.5 All symbols, modifiers, Tolerance Zones, Feature Control/Datum Reference Frames, General Rules, Free state Variation, Fundamental Rules, Basic Dimensions, Datums and Datum Selection, Datum Symbol Placement, Virtual Condition, Datum Targets, Position Tolerance Calculation, Projected Tolerance Zones, Chain Line and Chain Dimensions Knowledge of Repair Station Instructions according to a Component Maintenance Manual. Knowledge of FAA conformity Inspection Knowledge of Coordinate Measuring Machine Programming and Operation of the machine Analyze facts and circumstances surrounding individual inspection problems and determine acceptance or rejection of parts within requirements. Performs inspection and records results to assist other departments in their research and analysis work. Review certification packages delivered with parts from suppliers for accuracy and adequacy. All other duties as assigned PRIMARY TOOLS OR EQUIPMENT: Computers, printers, calculator and inspection equipment. Qualifications Education and/or Experience: BS Degree and/or 10 years of experience in an aerospace manufacturing environment. Class-A Inspector and CMM experience Language Skills: Ability to read and comprehend instructions, correspondence and memos. Good verbal skills with ability to effectively present information to customers, managers and other employees of the organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability calculate figures and amounts such as percentages and to draw and interpret bar graphs. Use general shop mathematics including trigonometry. Other Teamwork or Skills and Abilities: Ability to participate as a team member, daily or in meetings. Ability to listen actively and respond in group discussions. Willingness to learn other job skills and assist other team members. Understanding of team and business goals. Reassess work based on team goals and team priorities. Physical Requirements: While performing the duties of this job, the employee is frequently required to sit; stand; walk, use hands to finger, handle or feel objects, and reach with hands and arms. The employee is occasionally required to stoop, kneel, or crouch. The employee must frequently lift and/or move up to 10 pounds and occasionally lift up to 20 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus from close items to items at a distance. Additional Information All your information will be kept confidential according to EEO guidelines.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **** **Summary** Apply quality inspection methods to verify that our product meets the design data, customer requirements and government regulations **Essential Duties and Responsibilities** include the following. Other duties may be assigned. + Read and interpret drawings, diagrams, blueprints, specifications, purchase order, customer orders, work orders, Travelers, Test Reports + Inspection of electronic equipment with its sub-assemblies like circuit cards, power supplies, wire harnesses, chassis assemblies, final unit assemblies for compliance with engineering drawings, customer requirements, Customer Order, FAA, ISO/AS9100 and other regulatory agency requirements + Inspect to workmanship standard and acceptance criteria for electrical/electronic assemblies or electronic systems or support structures and components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, crimps, stakes, screws, welds, solders, press fits, or performs similar operations to join or secure parts in place + Inspect dimensions and clearances of parts for conformance to drawing, specifications, using instruments, such as micrometers, calipers, feeler gauges, height gauges, and other quality inspection tools. + Performing/Reporting First Article Inspection (FAI) and issue FAI reports per AS9102B, include per Geometric Dimensioning and Tolerancing (GD&T) ASME Y14.5-2009 requirements + Working knowledge of or certified in IPC-A-600, IPC-A-610, IPC-A-620 workmanship Standard + Inspect Test Reports to ensure conformance to test specifications + Verify configuration level for hardware and software products + Pull together Conformity data-package for unit shipment, or to present to show customer product/process requirement conformance + Familiar with assembly methods and processes of electronic units in an ISO-9001 / AS9100 manufacturing environment + Must be able to document inspection findings, complete rejection reports communicate inspection findings and concerns with manufacturing and other Quality personnel as well as understand and follow written company procedures and processes **Supervisory Responsibilities** None at this time **Competencies** To perform the job successfully, an individual should demonstrate the following competencies: + Ethical conduct - Will treat everyone with respect, inspires the trust of other, follows policies and procedures and supports organization's goals and values. + Stress Management/Composure - Ability to perform under pressure and demonstrate tact and composure. + Problem Solving - Identifies and resolves problem in a timely manner, demonstrates problem solving and troubleshooting skills. + Technical Capacity. + Communication Proficiency - Clearly conveys information and ideas through a variety of media to individuals or groups in a manner that engages the audience and helps them understand and retain the message. + Analytical Skills - Skill and ability to: collect, organize, synthesize, and analyze data, summarize findings; develop conclusions and recommendations from appropriate data sources. + Collaboration - Works effectively and cooperatively with others; establishes and maintains good working relationships. + Customer Focus - Makes customers and their needs a primary focus on one's actions; develops and sustains productive customer relationships. + Performance Management. + Results Driven. + Diversity - demonstrate knowledge of company EEO policy and promotes and harassment-free environment. **Qualifications** To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. **Education and/or Experience** High school diploma or general education degree (GED); at least five to seven years' of related experience and/or training; or equivalent combination of education and experience. **Computer Skills** + Proficient in Microsoft Office Applications: Outlook, Windows, Word, Excel, Access **Certificates, Licenses, Registrations** + Current IPC-610 or IPC-620 certification strongly preferred **Other Skills and Abilities** + Minimum 5 years' experience in the inspection of avionics units or electronic equivalent systems. + Proficiency in using calipers, micrometers, scales, PC-Windows experience and accuracy in data entry. + Maintained knowledge in IPC-610 or IPC-620 workmanship STD. **Other Qualifications** + U.S. Person required due to ITAR restrictions **Position Type/Expected Hours of Work** + This is a full-time position, and hours of work and days are Monday through Friday within one hour plus/minus of 6.30 a.m. to 4:00 p.m. This position may require long hours and frequent weekend work. **Physical Demands** While performing the duties of this job, the employee is occasionally required to standing and walking. The employee is frequently required to Sit, Use hands to finger, handle or feel; occasionally reaching with hands, stoop, kneel, crouch, or crawl. The employee is continuously required to lift and/or move up to 10 pounds and regularly; required to lift and/or move up to 25 pounds occasionally. Special vision requirements include, color vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. **Work Environment** While performing the duties of this job, the noise level in the work environment is usually moderate; occasionally by fumes or airborne particles and toxic or caustic chemicals. **Other Duties** Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities or activities may change at any time with our without notice. **Salary Range:** $42,800.00-$57,100.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne conducts background checks on qualified applicants who receive a conditional offer of employment in accordance with applicable laws, regulations and ordinances. Background checks may include, but are not limited to, education verification, employment history and verification, criminal convictions, Motor Vehicle Report (MVR & driving history), reference check, credit checks/credit history and drug testing. All qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Job Description Job Title: Quality Control Inspector II F Reports To: Quality & Process Planning Manager Job Purpose The Quality Control Inspector II is responsible for ensuring that all products meet established quality standards and customer specifications. This role performs inspections, checks, and tests during the manufacturing process, records observations, and recommends improvements. The position requires proficiency with ERP systems to produce quality reports for internal and external use, while supporting company-wide quality initiatives and continuous improvement efforts. Duties & Responsibilities Ensure compliance with all quality check procedures throughout the production process. Perform required physical testing in accordance with Work Instructions. Develop inspection plans aligned with company and customer-specific requirements. Conduct required visual checks and verify masking accuracy against blueprints and purchase orders. Act as subject matter expert for multi-process orders. Approve internal masking with resource owners to prevent process failures. Record inspection data, document pass/fail status, and report rejections with photo evidence as needed. Tag and hold parts for review when disposition is required. Complete logbooks for Copper Sulfate and 24-hour humidity tests. Review Shop Travelers for accuracy, completion, and compliance. Verify packaging instructions are followed before shipment and ensure traceability. Inspect expedited, regular, and rework orders for proper processing. Perform random sampling inspections on large quantity orders. Gather required measurement tools and take photos, sharing findings with customers and production teams. Promote accuracy in job scanning and identify opportunities to improve shop floor efficiency. Utilize ERP software to document corrective actions and prevent recurring quality issues. Educate production staff on quality control issues and support improvement efforts. Assist Quality Engineering and Specialists with troubleshooting and corrective actions. Maintain communication via email and phone as required. Ensure inspection benches are organized and clean; maintain 5S standards and audits. Perform other duties as assigned by management. Qualifications 3-5 years of quality control inspection or related experience. High School Diploma or equivalent required. Basic blueprint reading and interpretation. Proficiency with Microsoft Office Suite and ERP systems. Strong verbal, written, and customer service skills. Experience using measuring tools (meters, gauges, calipers, etc.). Ability to work full-time, including overtime and weekends as needed. Key Competencies Strong verbal and written communication skills. Attention to detail and accuracy. Basic math and analytical skills. Documentation and reporting skills. Hand-eye coordination. Ability to stay organized and maintain good housekeeping practices.

Spacecraft represent the most pressing unmet need across the entire aerospace industry. As more launch vehicles come online and the cost to orbit decreases, more companies launching payloads to space continue to emerge. For the first time in history, this influx of payload companies combined with reduced launch costs has resulted in a massive increase in need for commercial spacecraft platforms, known as satellite buses. These buses hold the payloads of our customers and are flown on launch vehicles. Apex manufactures these satellite buses at scale using a combination of software, vertical integration, and hardware that is designed for manufacturing. Our spacecraft enable the future of society: ranging from earth observation to communications and more. We'd love for you to join us on our mission of providing humankind access to the galaxy beyond our planet. About the Role Apex is looking for an experienced and motivated Spacecraft Quality Technician to oversee daily manufacturing operations. The ideal candidate will provide the production team with the ability to meet quality and safety standards while driving continuous improvement initiatives. This role requires strong leadership, organizational skills, and a commitment to fostering a collaborative and high-performing work environment. Responsibilities: • Conduct inspections and tests on in-process products and finished goods using appropriate tools and equipment. • Read and interpret blueprints, technical drawings, and specifications to verify product compliance. • Document and report quality issues, non-conformances, and inspection results accurately. • Perform root cause analyses and collaborate with cross-functional teams to implement corrective and preventive actions. • Maintain quality inspection tools and equipment. • Support the development and implementation of quality control procedures and standards. • Assist with internal and external audits to ensure compliance with regulatory and company requirements. • Monitor production processes to identify potential quality issues and recommend improvements. Requirements: • High school diploma or GED required; associate's degree or technical certification preferred. • 3+ years of experience in quality control/inspection in the aerospace industry. • Proficiency in using measurement tools (e.g., calipers, micrometers, gauges, multimeters) and testing equipment. • Strong attention to detail and excellent problem-solving skills. • Ability to read and interpret engineering drawings and technical documents. • Strong communication skills and ability to work collaboratively in a team environment. • Knowledge of quality systems and standards (e.g., ISO 9001, AS9100) is a plus. • Proficiency with Microsoft Office Suite and quality management software (preferred). Why Join Apex? Apex believes in creating a work environment that you look forward to embracing every day. Our employees love working at Apex, and we want you to love it too. We're a fast-growing startup backed by $200M in Series D funding, and we invest heavily in our people from day one. What We Offer For Full-time Employees: Shared upside: Receive equity in Apex, letting you benefit from the work you create Best-in-class healthcare: 100% company-paid medical, dental, and vision for you and your dependents, plus $100k life insurance at no cost Comprehensive PTO package to reset and recharge - starting at 15 days vacation, growing to 20+ days annually, plus 10 paid holidays Competitive 401(k) plan with generous matching - 100% match on first 3%, 50% on next 2% 8 weeks paid parental leave plus childcare reimbursement up to $350/day for work-related travel Daily catered lunch and unlimited snacks to keep you fueled throughout the day Vibrant community: Monthly office BBQs, pickleball tournaments, run club, and social gatherings for you and your family Your dream desk setup and all the tools you need to be your most productive self World-class Playa Vista office with EV chargers, with the benefit of in-person collaboration with amazing coworkers and flexibility to integrate work and life Real impact opportunity: Work alongside experts from aerospace, new space, and other cutting-edge industries to make a lasting difference Ready to join a team where your contributions matter and your future is bright? Let's build something extraordinary together. Equal Opportunity Employer Apex Technology, Inc. is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Candidates and employees are always evaluated based on merit, qualifications, and performance. We will never discriminate on the basis of race, color, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.

Spacecraft represent the most pressing unmet need across the entire aerospace industry. As more launch vehicles come online and the cost to orbit decreases, more companies launching payloads to space continue to emerge. For the first time in history, this influx of payload companies combined with reduced launch costs has resulted in a massive increase in need for commercial spacecraft platforms, known as satellite buses. These buses hold the payloads of our customers and are flown on launch vehicles. Apex manufactures these satellite buses at scale using a combination of software, vertical integration, and hardware that is designed for manufacturing. Our spacecraft enable the future of society: ranging from earth observation to communications and more. We'd love for you to join us on our mission of providing humankind access to the galaxy beyond our planet. About the Role Apex is looking for an experienced and motivated Spacecraft Quality Inspector to oversee daily manufacturing operations. The ideal candidate will provide the production team with the ability to meet quality and safety standards while driving continuous improvement initiatives. This role requires strong leadership, organizational skills, and a commitment to fostering a collaborative and high-performing work environment. Responsibilities: * Conduct inspections and tests on in-process products and finished goods using appropriate tools and equipment. * Read and interpret blueprints, technical drawings, and specifications to verify product compliance. * Document and report quality issues, non-conformances, and inspection results accurately. * Perform root cause analyses and collaborate with cross-functional teams to implement corrective and preventive actions. * Maintain quality inspection tools and equipment. * Support the development and implementation of quality control procedures and standards. * Assist with internal and external audits to ensure compliance with regulatory and company requirements. * Monitor production processes to identify potential quality issues and recommend improvements. Requirements: * High school diploma or GED required; associate's degree or technical certification preferred. * 3+ years of experience in quality control/inspection in the aerospace industry. * Proficiency in using measurement tools (e.g., calipers, micrometers, gauges, multimeters) and testing equipment. * Strong attention to detail and excellent problem-solving skills. * Ability to read and interpret engineering drawings and technical documents. * Strong communication skills and ability to work collaboratively in a team environment. * Knowledge of quality systems and standards (e.g., ISO 9001, AS9100) is a plus. * Proficiency with Microsoft Office Suite and quality management software (preferred). Shift Hours: 2PM-10:30PM + 10% Shift Differential Why Join Apex? Apex believes in creating a work environment that you look forward to embracing every day. Our employees love working at Apex, and we want you to love it too. We're a fast-growing startup backed by $200M in Series D funding, and we invest heavily in our people from day one. What We Offer For Full-time Employees: * Shared upside: Receive equity in Apex, letting you benefit from the work you create * Best-in-class healthcare: 100% company-paid medical, dental, and vision for you and your dependents, plus $100k life insurance at no cost * Comprehensive PTO package to reset and recharge - starting at 15 days vacation, growing to 20+ days annually, plus 10 paid holidays * Competitive 401(k) plan with generous matching - 100% match on first 3%, 50% on next 2% * 8 weeks paid parental leave plus childcare reimbursement up to $350/day for work-related travel * Daily catered lunch and unlimited snacks to keep you fueled throughout the day * Vibrant community: Monthly office BBQs, pickleball tournaments, run club, and social gatherings for you and your family * Your dream desk setup and all the tools you need to be your most productive self * World-class Playa Vista office with EV chargers, with the benefit of in-person collaboration with amazing coworkers and flexibility to integrate work and life * Real impact opportunity: Work alongside experts from aerospace, new space, and other cutting-edge industries to make a lasting difference Ready to join a team where your contributions matter and your future is bright? Let's build something extraordinary together. Equal Opportunity Employer Apex Technology, Inc. is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Candidates and employees are always evaluated based on merit, qualifications, and performance. We will never discriminate on the basis of race, color, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.

Perform in-process inspection on product being processed through the work cell, specifically at SMT, Wave and Selective Soldering operations. Essential Duties and Responsibilities: * Adhere to all ESD requirements and Board Handling. * Use of Moisture Sensitive Device (MSD) handling requirements based on component moisture sensitive levels (MSL). * Verify process compliance to document control process and procedures. * Examine product to verify conformance to workmanship standards. * Inspects and approves incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting unacceptable materials through the designated ERP system. * Inspect product being processed through work cell according to specific in-process inspector training and procedure, along with IPC-A-610 & J-STD-001 workmanship standards. * Documents inspection results by completing reports and logs as applicable. * Resolve quality-related issues in a timely matter. * Approves finished material and/or product by confirming specifications, conducting visual measurement tests, returning products for re-work and confirming re-work. * Responsible for stopping processes, with communication to Production Supervisor, lead and/or engineering, to control manufacture of non-conforming assemblies. * Support and follow all ISO standards related to various Quality Management Systems. These systems may include, but are not limited to, quality, the environment, health, safety and security. * Maintains safe and healthy work environment by following standards and procedures, and complying with legal regulations. * Perform all other duties, as assigned.

Job Description Hydraulics International, Inc (HII) is seeking a Quality Inspector II who performs visual, surface plate layout, verify outside process, in-process, and final inspection of manufactured, purchased and assembled items, units or systems and packaging, packing and marking of units prior to shipment in accordance with drawing, planning, purchase order and or customer requirements. You should be a self-starter with ability to handle increasing responsibility and multiple takes with demonstrated attention to quality, detail, and accuracy. Key Performance Deliverables: Basic knowledge or ability to perform visual, surface plate layout, verify outside processes, in-process and final inspection of manufactured, purchased and assembled items, units or systems and packaging, packing and marking of units prior to shipment in accordance with drawing, planning, purchase order and/or customer requirements. Comprehension and accurate execution of quality assurance methods and procedures. Complete inspection, work order, AS9102 1st Article and test records, reports, logs, rejection reports and inputting quality data into ERP database. Ability to use standard inspection equipment (calipers, micrometers, height gage, thread gages, etc..), experience or efficiency with CMM-coordinate measuring machines is desirable, but not mandatory (target-goal to obtain level III) Ability to read and interpret purchase orders/contracts, drawings, industry standards and specifications, comprehension and compliance to customer specifications and requirements. Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals, adept with Trigonometry - GD&T. Conduct inspections and tests of raw materials, in-process materials, and finished products to ensure compliance with established quality standards. Document inspection results and maintain accurate records of test data. Communicate inspection results to relevant personnel and departments. Support continuous improvement initiatives by identifying potential process improvements and making recommendations. Participate in training and cross-training programs to develop and maintain knowledge of inspection techniques, quality control processes, and industry regulations. Follow all safety and environmental policies and procedures. Requirements: High school diploma or equivalent. Minimum of 2-3 years of experience in a similar role. Knowledge of quality control techniques and principles. Ability to interpret technical drawings and specifications. Ability to work independently and in a team environment. Strong attention to detail and problem-solving skills. Ability to use measuring instruments and test equipment. Experience providing guidance and training to junior inspectors. Competencies: Customer Focus - Anticipating, meeting and/or exceeding customer needs, wants and expectations. Interpersonal Skills - Effectively communicat ing, building rapport and relating well to all kinds of people. Planning and Organizing - Establishing courses of action to ensure that work is com pleted effectively. Problem Solving - Defining, analyzing and diagnosing key components of a problem to formulate a solution Project Management - Identifying and overseeing all resources, tasks, systems and people to obtain results. Salary Expectations: We offer competitive compensation & benefits package: 401(k) Dental insurance Health insurance (Dental, Vision, & Life Insurance) PTO About HII: HII headquartered in Chatsworth, California, U.S.A., is a leading supplier of integrated products, services and support to military forces, aviation and commercial industries, Government agencies and prime contractors worldwide. Focused on defense and commercial technology, the Company develops manufactures and supports a broad range of systems for over one hundred industries as well as mission critical and military sustainment requirements worldwide. We are extremely proud of the fact that our extensive design capabilities enable us to produce the most sophisticated units known to today's technology. Our corporate, engineering and manufacturing facilities, located in Chatsworth, CA and Forsyth, GA, encompass over 625,000 sq. feet. Our manufacturing facility is equipped with the latest state-of-the-art equipment such as CNC lathes and mills, computerized tube bending, and automatic press brake and programmable punch press, laser topography scanners, and other quality verification devices. HII has combined the greatest talent, skill, and equipment to best service our customers' demands. HII is an Equal Employment Opportunity Employer and strictly prohibits discrimination and harassment against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibits discrimination and harassment against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability (including physical, emotional, and mental health), or status as a protected veteran. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact **************x200 for assistance.

MWH is a leading water and wastewater treatment focused general contractor in the US with a rich history dating back to the 19th century Fueled by the mission of Building a Better World our teams are rapidly growing across the nation As a company committed to our teams well being and growth we offer a supportive work environment opportunities for advancement and the chance to contribute to a mission that shapes the future Your expertise and ambition are valued here The work we do matters The critical systems infrastructure we build changes lives betters communities and improves ecosystems If youre passionate about this we want to hear from you About the Role MWH Constructors Construction Management Services CMS group is seeking qualified candidates for the position of Quality Inspector to conduct and document inspections related to the construction of waterwastewater related infrastructure projects in the Santa Clarita CA area Essential Functions Represent the project owner in the field provide single point field inspection of the Contractors work Daily monitor and record contractors methods procedures and processes for compliance with the contract and prepare a comprehensive Daily Inspection Report with measurement of daily installed quantities and resources utilized Inspect the work for completeness and conformance with the plans specifications and applicable regulations and ordinances Assist the construction manager in developing as built drawings Document compliance and non compliance of completed work with established quality control and quality assurance processes and procedures Basic Qualifications High School diploma or equivalent education Strong written and oral communication skills Minimum of 3 years of inspection experience in the construction of water infrastructure projects ACIACPII CertificationsA thorough understanding of construction safety quality control and general contract management requirements is necessary Confined Space CertificationAn equivalent combination of related experience and technical training may be substituted Valid California Drivers LicensePreferred Qualifications Bachelor of Science degree in Civil Engineering or Construction ManagementCompensation The base hourly rate is 6596 and fringe benefits are 3535 as per the General Prevailing Wage Determination PWD issued by the Director of Industrial Relations httpswwwdircagovoprl2025 2PWDDeterminationsSouthernSC 023 63 2DpdfBenefits Health Insurance medical dental and vision Paid Time Off includes vacation and sick time Paid Parental Leave Program10 Paid Holidays 401k Plan company matching contributions up to 4Employee Referral Program MWH Constructors is a global project delivery company in heavy civil construction with a focus on water and wastewater treatment infrastructure With the ultimate goal of delivering maximum value to clients and their local communities MWH Constructors provides single source integrated design and construction services through a full range of project delivery methods Incorporating industry leading preconstruction and construction services the Companys multi disciplined team of engineering and construction professionals delivers a wide range of projects including new facilities infrastructure improvement and expansion and capital construction services Equal Opportunity Employer including disabled and veterans Please note that all positions require pre employment screening including drug and background check as a condition of employment LI JB1 LI Onsite

ABOUT SANISURE SaniSure is a multinational manufacturer of single-use bioprocessing solutions (SUT) used in the production of biological drugs, including monoclonal antibodies, cell therapies, gene therapies, and vaccines. With operations in the U.S. and in Europe, SaniSure operates a leading platform of vertically integrated critical fluid management technologies and integrated solutions. Its single-use products and system solutions are sold to global pharma and biotech companies and are used from R&D through full-scale commercial cGMP manufacturing of among the most innovative large molecule therapeutics and vaccines. This role is expected to be on-site. We continue to be on a robust growth trajectory, via both organic and inorganic growth, as the company capitalizes on increasing global demand and continues its transition from a component manufacturer to an integrated systems and solutions provider. Our primary offering includes high-value assembly solutions and a portfolio of market-leading products, including PharmaTainer bottles and carboys and related assemblies, Mixed4Sure mixing solutions, Flex4Sure bags and bag assemblies, Fill4Sure needles and needle assemblies, fittings, clamps and a wide range of silicone, braided and thermoplastic tubing solutions. The company has a growing portfolio of innovative solutions serving fast-growth applications, such as cell and gene therapies. SaniSure is a high-growth, nimble and innovative company with a strong customer and market focus. Join us and grow your career at SaniSure! SUMMARY : Performs quality control inspections in all aspects of operations, checks, and test during the manufacture of products. Inspect incoming materials, and products at different stages of production. Records observations and make recommendations for improving processes. Shift 7:00 to 3:30 pm. ESSENTIAL FUNCITONS: Responsible for all activities involving quality inspections and compliance with applicable regulatory requirements; Initiate nonconformance reports (NCR). Performs all aspects of testing related to manufacturing. Incoming inspections In-process inspection. Final Inspection release of finished goods. Document review. Supports cross functional departments investigate potential non-conformance's observed Ensures that all inspections and procedures are properly completed and documented. Perform pre and post-inspection of product gamma irradiation process. Approve or reject raw materials with respect to quality standards and communicate results to all pertinent parties. Initiate nonconformance reports (NCR) for all non-conforming material identified throughout operations Prepare and submit Metrics reports to the quality supervisor or QC lead Comply with all safety requirements ensuring work areas meet standards. May be required to report to multiple facilities within a 2-mile radius. Job Order document review and release Other duties as assigned QUALIFICATIONS High School Diploma or equivalent with 2+ years of experience in quality control inspections. Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. Minimum of 0-2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. Solid organizational and planning skills required. Ability to communicate effectively, verbally and in writing, demonstrate good interpersonal skills interdepartmentally and with external vendors and contractors. Must be able to work effectively and efficiently in a team environment. Must have the following personal attributes: integrity and trust, work ethic, sound judgment, intellectual honesty, pragmatism, courage and conviction. Must display personal accountability for results and integrity. Must display eagerness to learn and continuously improve. Must have uncompromising dedication to quality. Good general mathematical skills. General knowledge and use of measuring devices such as calipers, tape measures, rulers, pin gauges Equal Opportunity Employer We are committed to providing equal employment opportunities to all employees and applicants without regard to race, ethnicity, religion, color, sex (including childbirth, breast feeding and related medical conditions), gender, gender identity or expression, sexual orientation, national origin, ancestry, citizenship status, uniform service member and veteran status, marital status, pregnancy, age, protected medical condition, genetic information, disability or any other protected status in accordance with all applicable federal, state and local laws.

Quality Control Inspector - Wire and cable harnesses Full-time, in-person On-the-job training Must be able to perform detail-oriented tasks, including inspection and testing. With supervision, perform basic and routine assembly operations on components, and sub-assemblies in accordance with military, aerospace and or other assembly standards using visual aids and verbal written instructions. Core Functions: Advanced Soldering Crimping techniques Connector assembly Understanding of Travels and Drawings Use of cable assembling hand and power tools such as heat guns, hand crimpers, screw drivers etc. Use of rulers and tape measure. Knowledge and experience: Cable/Harness Assembly in Aerospace and Military Applications Ability to Read & Interpret Blueprints, Schematics, Traveler/Routers, Bills of Material & Wire Lists. Basic math and measurements. Fluent English The following is preferred but not required: Experience interpreting design drawings Experience with wire and cable harnesses Familiarity with standard specifications such as IPC/WHMA-A-620, IPC J-STD-001, and NASA-STD-8739.4 Certification to the standards IPC/WHMA-A-620, IPC J-STD-001, and NASA-STD-8739.4 is a big plus. Schedule: M-F 6:00 am-2:30pm.

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

THE COMPANY Silvus Technologies is dedicated to one mission: connecting those who keep us safe. We do so by delivering the most advanced Mobile Ad-hoc Network (MANET) radios powered by our custom and ever-evolving Mobile-Networked MIMO waveform. Together, our radios and waveform provide the vital communications for mission critical applications in the harshest environments from underground tunnels to high altitude balloons. Silvus StreamCaster radios are being rapidly adopted by customers all over the world ranging from the U.S Departments of Defense, to International, Federal, State and Local Law Enforcement agencies, all the way to the Super Bowl, Grammys and industry-leading drone, robot, and other unmanned systems manufacturers. Wouldn't you like to join an incredibly talented group of people, doing very challenging work, with the prime directive of “ Keeping Our Heroes Connected ”? Silvus' rapid growth is fueled by a focus on research and innovation and a team of the most passionate, skilled, and creative thinking individuals. If you are looking for a challenging experience, you owe it to yourself to learn how Silvus can provide a rewarding opportunity that creates a pathway to a fulfilling career. THE OPPORTUNITY Silvus is seeking a Quality Control Inspector who will report to the Quality Control Inspection Supervisor on the OQC team. Primary responsibilities will include conducting thorough inspections, maintaining accurate documentation, and ensuring proper procedures are followed for incoming electronic and mechanical parts and during the manufacturing and testing process. This role is also responsible for investigating any quality issues, anomalies, or failures and will work alongside engineering and suppliers to recommend any necessary changes or improvements. This position is fully onsite, Monday through Friday, at Silvus Technologies' HQ in the heart of vibrant West Los Angeles. The following is a list of at least some of the current essential job functions of the position. Management may assign or reassign duties and responsibilities at any time at its discretion. ROLE AND RESPONSIBILITIES Perform and document inspections of products and processes, including electronic cables, GPS devices, Wi-Fi dongles, connectors, mechanical enclosures, shields, and other critical components. Conduct inspections tied to receiving raw materials, parts, components, and fit checks as necessary. Ability to inspect First Article components and subassemblies. Prepare in-process inspection reports, ensuring completeness and accuracy. Maintain Quality documentation. Identify the serviceability of parts and components and appropriate tooling. REQUIRED QUALIFICATIONS High School Diploma or GED required. Minimum 1-3 years of electronic part inspection experience. Proficient experience utilizing inspection tools (i.e., multi-meters, calipers, micrometers, microscopes). Demonstrated proficiency in reading basic schematics, specifically those related to PCBs and PWAs. Read and interpret part documentation, including blueprints, drawings, schematics, etc. Utilize Google Suite, Microsoft Office, and various communication systems effectively. Identify and escalate potential issues. Maintain clear and accurate records and documentation. Must have excellent organizational skills, possess high attention to details, with the capacity to handle numerous tasks simultaneously. Excellent and effective oral and written communication. Must be a U.S. Citizen due to clients under U.S. government contracts. All employment is contingent upon the successful clearance of a background check. PREFERRED KNOWLEDGE SKILLS AND ABILITIES IPC-J-STD 610, 620, or 001. Ability to recognize the importance of processes and procedures and follow them accordingly. Ability to remain flexible and responsive in a fast-paced environment with shifting demands. Effectively evaluate workload and manage competing priorities and deadlines. Proactively recognize challenges or risks and communicate them to the appropriate stakeholders to ensure timely resolution. WORKING CONDITIONS & PHYSICAL REQUIREMENTS Occasional exposure to heat and cold. While performing the duties of this job, the employee is required to do the following: Perform bending and reaching movements to place items on lower and higher shelves. Kneeling or squatting to access lower shelves. Must be able to lift up to 50 lbs. when receiving incoming part shipments. Walking/Moving in the labs. COMPENSATION The pay range is NOT a guarantee. It is based on market research and peer data, and will vary depending on the candidate's experience and qualifications. CA Pay Range$22-$27 USD NOTE - As a U.S. Federal Contractor, Silvus Technologies requires that ALL candidates being considered for employment for any position (regardless of level) MUST be a U.S. Person (permanent resident or citizen). Stricter U.S. Citizen ONLY requirements are needed for some Engineering or R&D roles. This generally does NOT apply to International positions; only job postings for positions located in the U.S. Exceptions will be included in the Required Qualifications section of the posted position. All Employment is contingent upon the successful clearance of a background check. Silvus is proud to be an equal-opportunity employer, and we value diversity. We do not discriminate on the basis of race, color, age, religion or belief, ancestry, national origin, sex (including pregnancy), sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, physical or mental disability, protected veteran status, genetic information, political affiliation, or any other factor protected by applicable federal, state, or local laws. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive benefits and privileges of employment. Please contact us to request accommodation. *Silvus does not accept unsolicited resumes from individual recruiters or third-party recruiting agencies in response to job postings. No fee will be paid to third parties who submit unsolicited candidates directly to Silvus Technologies.

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

At QIMA, we're on a mission to help our clients make products consumers can trust. Working with over 30,000 global brands, retailers, manufacturers and food growers, we are on the ground wherever products are made. We help businesses secure every step of their supply chain with quality inspections, supplier audits, certifications, and lab testing, all powered by our intelligent digital platform. Our team of 5,000 QIMers (and counting) across 40 offices and laboratories, are united in our shared passion for innovation and integrity, and guided by our QIMA values in the decisions we make every day. We believe in the work we do, and in making a positive difference in the world. Does this sound like something you'd like to be a part of? Our Consumer Goods Division is dedicated to helping brands, retailers and manufacturers worldwide deliver safe, quality and ethically made products to their consumers. Every day at work, our inspectors, auditors, and lab techs use their expertise to help safeguard the products you use every day in your home: from clothes and footwear to toys and baby products, to electronics, appliances, and furniture. Job Description As a Quality Control Inspector, you'll be reporting to an Operations Manager and working as a part of our Operations team. At QIMA, the role of Operations is to deliver our industry-leading services to our clients while ensuring that all the work is performed to the QIMA standard of quality. Your role in this will be to: Check email daily in order to receive inspection documents and guidelines; Attend inspections on time and communicate with supplier in a professional way; Perform the inspection of the merchandise according with company procedures. Supervise the stuffing of the containers according with company procedures; Fulfill inspection reports according with company procedures and time lines. Qualifications Think you have what it takes? First of all, we want someone with: Experience in quality management, especially softlines/ garments/ textiles/ footwear (2 years or more); Knowledge of AQL standards , as well as relevant safety and quality regulations; Good command of English (spoken and written); Great attention to detail and strong professional ethics . Additional Information Does this describe you? Then we want to hear from you as soon as possible! Apply now and we can write the next chapter of the QIMA story together. Note: This position is open to candidates who work as freelancers in Los Angeles.

Meet the Owned Brand division of REVOLVE: REVOLVE is the next-generation fashion retailer for millennial and Generation Z consumers. As a trusted, premium lifestyle brand and a go-to source for discovery and inspiration, REVOLVE delivers an engaging customer experience from a vast yet curated offering of over 45,000 products. Founded in Los Angeles in 2003 by co-CEOs, Michael Mente and Mike Karanikolas, REVOLVE's family of brands includes their luxury offering, FORWARD by Elyse Walker, and a portfolio of 24 owned brands such as Lovers + Friends, Tularosa, NBD and RAYE. The Owned Brand division within REVOLVE is an industry-leading fashion design and production house based in Los Angeles. Leveraging the power of REVOLVE's data driven merchandising, combined with raw creative talent results in an unparalleled ability to identify a specific market niches, developing brands that each have their own identity, designed with a distinct consumer interest and personality in mind. At REVOLVE the most successful team members have the thirst and creativity to redefine fashion retail for the 21st century, making REVOLVE THE leading online retail destination targeted towards Millennial and Generation Z consumers seeking premium fashion. With a team of 1,000 strong, we are a dynamic bunch that are motivated by getting the company to the next level. It's our goal to hire high-energy, diverse, bright, creative, and flexible individuals who thrive in a fast-paced work environment. In return, we promise to keep REVOLVE a company where inspired people will always thrive. Some of the sweetest perks we offer aren't in a typical benefit package like hefty discount on items we carry - as in 50% or more off retail prices, free weekly lunches, and pretty rad company parties. To take a behind the scenes look at the REVOLVE “corporate” lifestyle check out our Instagram @REVOLVEcareers or #lifeatrevolve. Are you ready to set the standard for Premium apparel? Main purpose of the Owned Brands QC Inspector role: This is a full time role for a candidate who can identify the most effective defect recovery process for each item to minimize monetary loss of defective merchandise. He or she will be heavily involved in the QC process through the speccing of garments, evaluation of garments, and providing insight on different garment issues. This is a permanent full time role for a candidate who is able to work in a fast paced, high volume, sku intensive environment while maintaining accuracy. Major Responsibilities: Essential Duties and Responsibilities include the following. Other duties may be assigned. • Accurately spec garments • Document defects into current systems • Comprehend and analyze reports to identify areas of opportunities • Effectively communicate issues to all involved parties • Communicate and interact with all cross functional departments, for pulling, mending, Returns, and any other follow ups as needed • Update QC Tracker, and other relating reports on daily basis • Minimize monetary loss of defective merchandise through defective recovery process • Identify the most effective defect recovery process for each item - RA, Restore, Sellable Defect, Other • Identify defects by inspecting defective apparel • Clearly communicate with Technical Design Team regarding defective and unacceptable merchandise • Travel as needed to the Cerritos location • Complete ad-hoc tasks and assignments as directed by management Required Competencies: To perform the job successfully, an individual should demonstrate the following competencies: • Ability to spec garments • High level of attention to detail and the ability to identify apparel construction flaws • Hands-on approach at recommending “how-to-fix” solutions quickly and efficiently • High level of apparel construction and fabrication knowledge • Strong communication, prioritizing and organizational skills • Ability to take ownership of assigned tasks and meet responsibilities without supervision • Ability to work successfully with any personality type and be a team player • Sense of urgency and ability to maintain performance quality under pressure • Flexible and adaptable to a very fast-paced environment • Must be able and willing to lift and carry up to 10 lbs., perform frequent repetitive finger, hand and wrist motions, as well as, bending, stooping, reaching, squatting, kneeling, pushing, and pulling • Must be able to sit for extended periods of time Minimum Qualifications: • Minimum 5-7 years' experience working in a QA/QC, Production or Warehouse environment required • Computer literate in Excel, Word and Email required • Technical fashion, garment construction and fabrication knowledge preferred Preferred Qualifications: • Bilingual highly preferred; proficient in English A reasonable estimate of the current base hourly/salary range is $18/hr to $19/hr. ATTENTION: After submitting your application, please check your spam folder for emails on your application status. Emails are sent from an ADP email address.