Quality inspector jobs in Palmdale, CA

About Us Haskel, an Ingersoll Rand Company, is a High-Pressure Technology Solutions. We specialize in Air-Driven Liquid Pumps, Air-Driven Refrigerant Pumps, Hydraulic Drive Compressors, Gas Booster Compressor System, BuTech High-Pressure Valves and Hydrogen Valves Fitting and Tubing. Job Summary This role is responsible for ensuring the quality control cell is actively engaged to meet daily customer demand and production schedule. Performs receiving, in-process and/or final inspection of hardware. Conducts complex inspections as defined by quality/inspection plans or per directions of quality management/engineering. Uses a complete range of precision tools and instruments requiring advanced inspection skills and techniques. Ensures that all gauges/tools used are properly calibrated. Identify accurate and efficient means of inspection techniques. Works with general/minimal supervision. Train and provide directions to the Quality Control team under the supervision of the Quality Control Manager. Responsibilities The Quality Team Lead will inspect products by using a variety of inspection tools/devices, work instructions and computer to perform a series of inspections to correctly verify incoming parts, in-process and completed assemblies. Verify supplier material certifications, including special processes, and ensure compliance with quality/PO requirements. Creates supporting documentation (data books, certificates of conformance, etc…) Support disposition of discrepant materials (MRB) in accordance with appropriate quality procedures and maintain low inventory of on-hold parts. Verifies first articles from suppliers and internal departments. Prepares and processes records and reports to document supplier/operations performance. Qualify supplier components and/or systems for assuring conforming product. Adheres to calibrations system of inspection, measuring and test equipment. Applies Statistical Quality Control techniques as directed. Assist with interpretation of drawings, specifications and quality requirements. Properly process goods for outside processing, investigates and evaluates component parts returned and nonconforming product. The Quality Team Lead provides effective training to the quality control cell and ensures safety and quality standards are always maintained. Work with supervisor to manage and prioritize staffing assignments to ensure customer demand and the production schedule are met. Use basic problem-solving skills to ensure stable operation of the quality control cell. Report problems or concerns with quality, processes, equipment, materials and labor to Quality management. Work closely with support staff such as Purchasing/Planning, Manufacturing Engineering, Production Supervisor, Materials/Warehouse to resolve issues. Observe, maintain, coordinate and complete standard work. Update production metrics and facilitate regular team communication. Identify and support continuous improvement efforts with Quality management. Sustain and drive lean manufacturing and 5S activities. Follow documented policies and procedures as designated by the company's Quality System. Basic Qualifications Ability to read and interpret documents such as safety rules, engineering drawings, operating and maintenance instructions, Material Standards, Quality Plans, Control Plans and Inspection Test Plans. Experience with Microsoft Office (Word, Excel, Outlook). Ability to communicate effectively through oral and written communications. Ability to analyze and solve problems. Ability to work with others collaboratively. Strong organizational skills. Preferred Experience leading teams or projects strongly desired. Quality Control experience. Lean manufacturing and continual process improvement experience. Educational Requirements High School diploma or equivalent Five years + of related experience and a minimum of two leading teams. LIP Eligible Role This position is eligible for the LIP (Local Incentive Plan) of up to 4%. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. At Ingersoll Rand, we think and act like owners - of our business, our communities, our planet, and our health too. The Ingersoll Rand benefits program provides you with the tools and resources to take accountability for your health so that we can continue to help make life better. Benefits of employment and include; Medical and Prescription drug plans Wellness and Chronic disease management programs Dental, vision, life/AD&D insurance Short- and Long-term disability Health Savings Account Flexible Spending Account Parental Leave Employee Assistance Program Discount Program Employee Stock Grant 401k plan with a company match 3 weeks of paid vacation and 11 paid holidays throughout the calendar year Voluntary benefits include legal, accident, and critical illness protection

Job Details 0T534 CA - El Monte, CA Full Time $29.22 - $35.20 Hourly 2nd ShiftDescription Who we are: The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products. Summary: The CMM Quality Inspector by using the Gill Process Documents (i.e.: GPS, GMS, GOS), performs essential duties to meet customer and AS9100 requirements and supports engineers with complex tasks. This position also works on quality-related projects with direction from the Quality Control Manager. Essential Duties and Responsibilities include the following. Other duties may be assigned. Follow company policies and procedures Comprehend and ensure compliance with internal quality documents, and customer specifications Read and understand customer specifications, process standards, drawings (blue prints), ANSI procedures, and industry standards. Coordinate with CNC production to inspect and rework parts in a timely matter. Must be able to setup, program, and operate Coordinate Measuring Machines, both traditional in-place and articulated-arm (Romer) devices. Proficient in reading blueprints, understanding GD&T, and working with associated technical documents. Proficient in the selection of appropriate hand-held and/or surface plate measuring equipment appropriate to the task. Comfortable providing instruction for the development of Inspection employees within the organization. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications and Education (Required) Functionally capable in the use of Microsoft Office and other basic computer software. Ability to comfortably multitask with minimal supervision. Ability to effectively communicate verbally and in writing Acceptable Vision Test results Hexagon Metrology coordinate measuring machine level 1 Working knowledge of PC-DMIS software ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee. The Gill Corporation is an Equal Opportunity Employer . Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances. The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department

Who we are: C.R. Laurence Co., Inc. (CRL) is the leading full-service provider of architectural metals, glass fittings and professional-grade glazing supplies. Offering more than 60,000 products, we serve the industry from locations throughout North America, Europe, and Australia. We operate our business to the highest standards of design, quality and customer service. The companies and institutions that depend on us impact the growing fields of glass fabrication, construction, architecture, interior design, and automotive. Their positions as leaders in their own industries mean they demand the highest standards from their suppliers. About the Position: We are currently searching for an experienced and analytical Quality Inspector to join our production department. As the Quality Inspector, you will uphold the safety regulations of our company and oversee the production process to guarantee that all our products meet quality expectations. The chosen candidate will perform regular product evaluations, record inspection results, and recommend improvements to the production process. To excel in this role, applicants should demonstrate great attention to detail with technical and math abilities. Responsibilities include, but are not limited to: Perform quality assessments on all incoming material from vendors, outgoing products for shipping and customer complaints. Reject all products and material that fail to meet quality expectations. Read drawings, plans and specifications to understand the requirements of the products and services. Perform Inspection and testing acceptance criteria Measure product dimensions examine functionality and compare the final product to the specifications. Recommend improvements to the production process to ensure quality control. Document inspection outcomes by completing detailed reports and performance records. Teach the production team about quality control concerns to improve product excellence Oversee the production process Resolve quality related issues in a timely manner. Control and maintenance of all quality documentation, such as: creation, review, approval, modification, elimination and distribution. Review, disposition and oversee rework of nonconforming product. Recommend Corrective/ Preventive actions to eliminate the causes of actual or potential non Qualification Requirements: A minimum of 1-year experience in a similar role High School diploma or equivalent qualification Certification in quality control is preferred Good math and technical skills Understanding of quality control standards and testing techniques. Basic computer skills (excel & word) Dependable, organized with ability to prioritize effectively Good communication skills Ability to problem solve, multi-task, attention to detail and work independently What CRL Offers You Highly competitive base pay Paid time off 10 Holidays (inclusive of 2 floating holidays) Market competitive 401(k) match Industry-leading medical, dental, and vision benefits Short-term and long-term disability coverage Life Insurance Employee discounts Health and wellness programs A culture that values opportunity for growth, development, and internal promotion Hourly: $21.15 - 26.44 We are excited to be an Equal Opportunity Employer at C.R. Laurence. We are actively seeking job applicants who reflect a broad representation of differences, including race, ethnicity, religion, sex, sexual orientation, gender identity/expression, physical ability, neurodiversity, age, veteran, family and economic status and background, geographical background and status, and perspective. We believe that the best companies reflect the incredible diversity in viewpoints, backgrounds, and identities of the world in their staffs, and are committed to inclusive hiring across departments and levels. C.R. Laurence Co., Inc. (CRL) is an E-Verify Employer.

Job Description Astrophysics Inc. is a leading global designer and manufacturer of X-Ray security inspection systems. Since 2002, we have dedicated ourselves to ensuring a safer world through advanced X-Ray screening and imaging technology. Our systems are deployed in critical infrastructure, aviation, and ports and borders sites in more than 140 countries. Hotels, prisons, courthouses, embassies, airports, military bases, and government buildings around the world depend on us for their safety and security. Astrophysics is an expanding, dynamic and fast-paced company looking for individuals who want to grow with us and be a part of a meaningful security mission. We currently have an immediate full-time position opening for a Quality Control Inspector located in City of Ontario, California. Job Summary: The Quality Control Inspector I is responsible for the inspection of x-ray imagining systems and components based on established inspection criteria. Inspections consist of verifying software and hardware functionality. Inspections also include verifying and approving the visual aspects of each unit, paperwork, electrical and imaging inspections. All inspection activities will be recorded on appropriate forms. Essential Duties: • Perform in-line quality inspections to insure product is produced in accordance to documented procedures, work/assembly instructions, and/or drawings. • Perform Final QC inspections as per documented procedures. Properly fill out form F-82-03-06 Final Quality Control Report • Review final QC inspection paperwork and imaging with Quality Control Supervisor or Quality Control Inspector III before release to shipping. • Verify that all paperwork from previous operations are properly filled out before release of product. • Prepares reports of findings and report inspection and test data to the Quality Control Supervisor • Follow daily work assignments as delegated by the Quality Control Supervisor. • Upon successful completion of final inspections, release product to the shipping department. • Perform QC paperwork maintenance assignments such as sorting, filing and copying as determined by the Quality Supervisor. • Assists with QC line inspections, i.e.: Label Placement, QC report, Packaging • Identify the procedure required to conduct quality test and inspections. • Follow inspection procedures as outlined in SOP-82-03 Quality Control Inspections. Line Inspection • Perform line inspection by performing audits of paperwork, labels, and visual inspection of frame & panels. • Perform line inspections as per documented procedures • Operates independently from the production function, to assess and determine quality status of goods at each stage. • Follow up and maintain all documentation regarding incoming inspection Education and Experience: • Strong attention to details, highly organized • Computer literate to include experience in navigating and manipulating file systems • Ability to multi-task and work in a fast paced environment • Effectively deal with personnel from other departments • Ability to read and write in English • High school diploma or equivalent • 0-2 years similar work experience required • Very good understanding of measuring techniques and tolerance call-outs • Proficient in the use of measuring equipment such as rulers and micrometers. • Experienced in visual inspections to determine material defects and paint imperfections Excellent benefit package including 401K plan with Employer Match 11 Paid Holidays, 10 PTO Days, Free Donuts on Fridays, Company Luncheons and year end Party! PLEASE APPLY AT: ************************************************** Equal Opportunity Employer Astrophysics Inc. provides equal employment and advancement opportunities to all individuals. Employment decisions at Astrophysics Inc. are based on merit, qualifications and abilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity national origin or protected veteran status and will not be discriminated against on the basis of disability. If you need assistance or an accommodation while seeking employment, please call *************** and ask for Human Resources. Determinations on requests for reasonable accommodation will be made on a case-by-case basis. Powered by ExactHire:185618

Inspects facility maintenance activities during and upon completion for conformance to manufacturers guidelines, regulatory requirements and company standards Essential Duties and Responsibilities Conduct QC inspections and audits on contract requirements, and other services performed. Prepares reports, develops quality plans, attends meetings as directed; performs other duties as assigned. Checks randomly selected samples, and verifies accuracy of equipment or process. Maintains a safe and healthy work environment by following standards and procedures, complying with legal regulations. Accomplishes quality and organization mission by completing related results as needed. Schedule inspection activities. Knowledge, Experience and Skill Requirements Knowledge of OSHA standards, NFPA, Joint Commissioning and safety procedures with skills in conducting accident investigations and safety inspections. Basic knowledge of mechanical systems, critical thinking skills, and proficiency with standard testing tools. A thorough understanding of ISO 9001:2015 standards Knowledge of recognized and generally accepted good engineering practice regulations and codes. Excellent analytical and computer skills, specifically in MS Office Suite. Strong written and oral communication and presentation skills. Strong teamwork and interpersonal skills Work Experience Five (5) years of experience in quality management for facility operations & maintenance of industrial equipment at an industrial facility requiring compliance with ISO 9001. Must hold Certified Quality Technician (CQT) certification through American Society for Quality. Must have the communication skills required to interface and coordinate with others. Experience working from building plans, blueprints, wiring diagrams, engineering drawings, and electrical maintenance and repair manuals Capable of performing physical labor including, walking, standing, lift up to 40lbs, pulling, climbing up and down ladders and agility/dexterity to perform duties assigned. Education, Licenses and Certification Required: High School Diploma OSHA Certification Certified Quality Technician (CQT) certification through American Society for Quality. This job description is subject to change by the employer as the needs of the employer and requirements of the job change. J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $40,000 to $60,000. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

We are seeking a Quality Control (QC) Inspector to join our team in Santa Fe Springs, CA. This is a Temp-to-Hire position, offering an excellent opportunity to grow within a fast-paced, quality-driven environment. As a QC Inspector, you will be responsible for ensuring that materials, processes, and products meet the highest standards of quality. Key Responsibilities: Perform regular inspections of materials using measurement equipment such as micrometers, calipers, and rulers. Ensure work packets are complete, accurate, and GDP compliant; make corrections as needed. Conduct mathematical calculations required to assist in completing inspections. Maintain a high standard of quality control methodologies and inspection techniques. Work closely with the QC Department and Production teams to resolve any issues and improve processes. Qualifications: Experience: Minimum of 2 years of QC experience, with at least 1 year of experience in the Medical Device, Pharmaceutical, or Aerospace industry. Skills: Proficiency with micrometers, calipers, and other measuring equipment. Certifications: HS Diploma or equivalent; knowledge of ISO 13485 and 17025 standards is a plus (but not a requirement). Independence: Ability to work independently with minimal supervision. Attention to Detail: Strong ability to catch discrepancies and ensure compliance with industry standards. What We Look for in a Candidate: Independent worker with the ability to solve problems autonomously. Strong communication skills, both written and verbal. Team-oriented with the ability to collaborate effectively with internal departments. A keen eye for detail and a passion for quality. A proactive, assertive individual who can handle high-stress situations without compromising on quality.

The Quality Control Inspector (QA/QC) is responsible for implementing quality control and safety plans to ensure compliance with contract specifications, applicable regulations, and company standards. This position inspects all phases of goods, services, and operations to verify conformity with established quality health, and safety requirements. The Quality Control Inspector (QA/QC) performs ongoing inspections to ensure all work meets contractual provisions, confirms that services listed on the performance requirement summary are completed in satisfactory manner, and determines areas to be inspected- both scheduled and unscheduled- as well as the frequency of inspections. This position requires communicating deficiencies to appropriate personnel, maintaining Quality Control files, and documenting the results of inspections. Performs all other position -related duties and assigned or requested. A valid Class A Commercial Driver's License (CDL-A) is required for this position to meet the scope of contract operations. Minimum Requirements High School graduate or equivalent. Must be able to speak, read, write, and understand English. Able to operate and inspect machines or equipment to diagnose defects and submit a request for replacement parts. Dismantles and reassembles equipment, using hoists and hand tools. Examine parts for damage or excessive wear, using micrometers and gauges. Identify defective engines and subassemblies, such as transmissions, and tests overhauled equipment to ensure operating efficiency. Performs scheduled and unscheduled maintenance, repairs, and adjustments of all heavy machinery to ensure the equipment remains fully mission capable for mission support. Performs a variety of collateral duties such as handling, containment, clean-up and disposal of hazardous waste, etc. Operates all heavy equipment and forklifts up to and including 50,000 pounds lift capacity, and a variety of other equipment to trouble shoot faults and validate repairs. Understands and uses safety items and personal protective equipment (PPE) that is mandatory and actively supports the EHS safety program. Required to walk, stand, sit, and move about the property for long periods of time. Required to perform physical activities that require considerable use of the arms and legs and moving the entire body, such as climbing, lifting, balancing, stooping to handle materials. Work in a noise level can range from minimal to intense. Able to lift and/or move up to 50 pounds. Possess a Valid California Commercial Drivers' License (CDL). Must be a US Citizen or able to work in the US. PD Systems is an equal opportunity employer and prohibits discrimination and harassment of any kind. Employment decisions at PD Systems are based on business needs, job requirements, and individual qualifications, without regard to race, religion, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

Quality Control Inspector - Wire and cable harnesses Full\-time, in\-person On\-the\-job training Must be able to perform detail\-oriented tasks, including inspection and testing. Summary: With supervision, perform basic and routine assembly operations on components, and sub\-assemblies in accordance with military, aerospace and or other assembly standards using visual aids and verbal written instructions. Core Functions: Advanced Soldering Crimping techniques Connector assembly Understanding of Travels and Drawings Use of cable assembling hand and power tools such as heat guns, hand crimpers, screw drivers etc. Use of rulers and tape measure. Knowledge and experience: Cable\/Harness Assembly in Aerospace and Military Applications Ability to Read & Interpret Blueprints, Schematics, Traveler\/Routers, Bills of Material & Wire Lists. Basic math and measurements. Fluent English The following is preferred but not required: Experience interpreting design drawings Experience with wire and cable harnesses Familiarity with standard specifications such as IPC\/WHMA\-A\-620, IPC J\-STD\-001, and NASA\-STD\-8739.4 Certification to the standards IPC\/WHMA\-A\-620, IPC J\-STD\-001, and NASA\-STD\-8739.4 is a big plus. Schedule: M\-F 6:00 am\-2:30pm. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"653983288","FontFamily":"PuviRegular","job OtherDetails":[{"field Label":"Job Opening ID","uitype":111,"value":"ZR_1442_JOB"},{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"Work Experience","uitype":2,"value":"4\-5 years"},{"field Label":"Salary","uitype":1,"value":"$20\-$25"},{"field Label":"Salary Type","uitype":2,"value":"Hourly"},{"field Label":"City","uitype":1,"value":"Westlake Village"},{"field Label":"State\/Province","uitype":1,"value":"California"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"91362"}],"header Name":"Quality Control Inspector\-Wire Cable and Harness","widget Id":"4**********0072311","awli IntegId":"urn:li:organization:3525447","is JobBoard":"false","user Id":"4**********0184003","attach Arr":[],"awli ApiKey":"861ql0p5wym4v2","custom Template":"3","awli HashKey":"66ba2a8eeb5a681ba7da00d31a032d78e5ed3414d140cf204a55382c0c8fce038ffeabbeedb5adcc344251186e484454f2800ec019c1cd83b305bb4e1324cd14","is CandidateLoginEnabled":false,"job Id":"4**********8276032","FontSize":"15","google IndexUrl":"https:\/\/greathirehr.zohorecruit.com\/recruit\/ViewJob.na?digest=Qx8B8qu1HVi@yVb@TMCCeHkGwssng5Nj5XZPFJ3aThw\-&embedsource=Google","location":"Westlake Village","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"5a0s1eed**********48682b45b77ac5327c6"}

Job Description ABOUT THE COMPANY Founded in 1888, Lee Kum Kee, a Hong Kong-based global food company, specializes in creating condiments and sauces that promote Chinese cuisine worldwide. With more than 200 products to choose from, Lee Kum Kee takes the mystery out of cooking authentic and delicious Asian foods in the comfort of your kitchen. Lee Kum Kee is committed to providing authentic and innovative condiments and sauces featuring the highest quality ingredients. Armed with a unique management culture, stringent quality control, superb and innovative products, coupled with the century-long brand reputation, Lee Kum Kee has achieved unanimous recognition and won numerous prestigious awards. BENEFITS Medical, dental, life insurance covered by the company 401(k) retirement plan with company match Two (2) weeks vacations Ten (10) paid holidays POSITION SUMMARY This position performs works related to online inspection, sanitation inspection, receiving inspection, and other activities related to quality assurance and quality control. ESSENTIAL FUNCTIONS Online Inspection Conduct online inspections and verify the control parameters according to procedures and instructions for production, filling and packaging process. Record result of inspection, including weigh-up, filling temperature, packaging material, product code, container closure, etc. Perform GMP/hygiene inspection based on GMP and hygiene standards. Correct GMP/hygiene violation and report to production supervisor and/or QA Manager. All jobs shall be conducted timely according to QA/QC work instruction. Sanitation Inspection Conduct daily and monthly sanitation inspections, including pre-operation inspection and post-operation inspection. Perform ATP test and environmental swabbing. Monitor environmental air quality and inspect employees' hygiene condition. Record the result of inspection and communicate with Production Supervisor and Quality Assurance Manager. Receiving Inspection procedures Inspect incoming raw materials and packaging materials according to QA/QC work instruction. Take samples when needed according to the receiving manual Organize and update Raw Material Manual. Organize and update receiving records. Organize and update COA from suppliers Other tasks Observe and record nonconforming products / production and promptly communicate with production supervisor and Quality Assurance Manager or designee for immediate action. Make routine decisions for product holding, production line holding, etc, and verify correction and corrective action and document the incident accordingly. Calibrate equipments used for inspections and report immediately if the device is malfunction. Assist Quality Assurance Manager with any tasks related to quality compliance. Perform other special assignment from the management. SUPERVISORY RESPONSIBILITIES This position has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skills, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE This position requires with minimum a high school diploma or general education (GED). Candidate must be able to work independently and in cross-functional teams to achieve established goals. Individual must be detailed-oriented, quality-oriented, with high sense of responsibility. LANGUAGE SKILLS Candidate must be able to speak, write, read and understand English to perform daily functions. Bilingual in English/Chinese or Spanish preferred. MATHEMATICAL SKILLS Ability to add, subtracts, multiply, and divides in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written and oral form. Ideal candidate must be able to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. CERTIFICATES, LICENSE, REGISTRATIONS Not required. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands and fingers to perform daily job functions. The employee is required to stand, sit, kneel, and walk when performing essential job functions. Occasional lifting and/or move up 50 pounds. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment may be high and individual who works in certain areas needs to wear proper PPE (Personal Protective Equipment). Lee Kum Kee (USA) Inc., a division of Lee Kum Kee International Holdings Ltd., has its headquarters and manufacturing facilities in Southern California with more than 300 employees. We are looking for the best and brightest talents to join our company and work together to bring the next level of success! It is Lee Kum Kee's policy to seek and employ the most qualified persons in all jobs in a manner which will ensure equal employment opportunity as well as administer personnel actions in a manner as to not discriminate against any person on the basis of race, color, religion, national origin, age, sex, sexual orientation, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

At QIMA, we're on a mission to help our clients make products consumers can trust. Working with over 30,000 global brands, retailers, manufacturers and food growers, we are on the ground wherever products are made. We help businesses secure every step of their supply chain with quality inspections, supplier audits, certifications, and lab testing, all powered by our intelligent digital platform. Our team of 5,000 QIMers (and counting) across 40 offices and laboratories, are united in our shared passion for innovation and integrity, and guided by our QIMA values in the decisions we make every day. We believe in the work we do, and in making a positive difference in the world. Does this sound like something you'd like to be a part of? Our Consumer Goods Division is dedicated to helping brands, retailers and manufacturers worldwide deliver safe, quality and ethically made products to their consumers. Every day at work, our inspectors, auditors, and lab techs use their expertise to help safeguard the products you use every day in your home: from clothes and footwear to toys and baby products, to electronics, appliances, and furniture. Job Description As a Quality Control Inspector, you'll be reporting to an Operations Manager and working as a part of our Operations team. At QIMA, the role of Operations is to deliver our industry-leading services to our clients while ensuring that all the work is performed to the QIMA standard of quality. Your role in this will be to: Check email daily in order to receive inspection documents and guidelines; Attend inspections on time and communicate with supplier in a professional way; Perform the inspection of the merchandise according with company procedures. Supervise the stuffing of the containers according with company procedures; Fulfill inspection reports according with company procedures and time lines. Qualifications Think you have what it takes? First of all, we want someone with: Experience in quality management, especially softlines/ garments/ textiles/ footwear (2 years or more); Knowledge of AQL standards , as well as relevant safety and quality regulations; Good command of English (spoken and written); Great attention to detail and strong professional ethics . Additional Information Does this describe you? Then we want to hear from you as soon as possible! Apply now and we can write the next chapter of the QIMA story together. Note: This position is open to candidates who work as freelancers in Los Angeles.

Job DescriptionBenefits: Dental insurance Health insurance Paid time off Profit sharing Vision insurance D.W. Mack Co., Inc is seeking a full time Junior Quality Inspector to join our team. You will conduct tests to determine the quality of finished materials and finished products. Alternative Workweek Schedule -Hours are Monday - Thursday 7:00am - 5:30pm Benefits include: Health, dental, vision, life insurance, profit sharing, vacation, sick pay Responsibilities: Inspect in-process production by confirming specifications, conducting visual measurement tests, and communicating required adjustments to the production supervisor or machine operator. Approves finished products by confirming the specifications, conducting visual and measurement tests, and communicating required adjustments to the production supervisor. Documents inspection results by completeing reports and logs. Keeps measurement equipment operating by following operating instructions and calibration requirements and calling for repairs. Maintains a safe and healthy work environment by following standards and procedures, and complying with legal regulations. Be a team member of the Quality department and support production and other internal departments to further th interest of the company. Qulaifications: Previous work experience in quality control or other related fields Strong attention to detail Strong analytical and critical thinking skills Excellent written and verbal communication Basic computer and math skills to calibrate and measure specifications Blueprint reading Ability to use measuring devices such as gauges, meters and calipers Experience in the Aerospace industry a Plus Conversational Spanish a Plus About D.W. Mack Co., Inc : D.W. Mack Co., Inc. is a family owned business that has been in operation since 1969. We are a Tool & Die stamping house with in house Die making, EDM, CNC mill & CNC lathe capabilities. Most of our business is working with the aerospace industry. We are AS9100D certified.

Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: * Perform inspection of materials, processes and final product, per business need. * Generates inspection reports according to AS9100 requirements. * Enter inspection data into systems. * Utilizes inspection tools including calipers, gauges and testing equipment (CMM). * Reads and interprets drawings, procedures and work instructions. * Identifies areas for improvement in inspection processes and coordinates implementation. * Comply with all safety requirements; participate in safety training/practices. Qualifications: * 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. * Understanding of QA requirements, processes, practices and systems. * Demonstrated ability to work in team-based environments. * Ability to read engineering drawings to determine and measure features and tolerances. * Strong written and verbal communication skills in English. * Software experience; Excel, Word, Power Point, etc. * Bilingual - English/Spanish Perks and Benefits: * Desired first shift schedule * Premium Health Insurance - $0 employee premium & $0 deductible * Company provided life insurance for all employees with $0 employee contribution * Dental * 10 paid holidays * 5 paid sick days * Accrued vacation * 401(k) * Profit Sharing * Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.

SPT Labtech is a global supplier of innovative lab automation products for the life science markets. Our solutions save time and material costs and simplify complex operations. We are natural innovators. We create, design and manufacture high quality, robust and innovative automated laboratory equipment for academic, pharmaceutical and biotechnology research. We are looking for a talented Quality Control Inspector to join our growing team. You must have the ability to work on complex products and to work collaboratively and flexibly across several inter-disciplinary teams. Inspector Job Responsibilities: Inspect and approve incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting and returning unacceptable materials. Inspect in-process production by confirming specifications, conducting visual and measurement tests, communicating required adjustments to production supervisor. Approves finished products by confirming specifications, conducting visual and measurement tests, returning products for re-work, and confirming re-work. Reject all in-coming materials, in-process production, and finished goods products that fail to meet quality standards by specifications or quality criteria through non-conformance process. Assists Quality team members or management with failure and nonconformance data recording and reporting Prioritizes schedules based on product introduction and manufacturing schedules, maintaining a minimum turnaround time. Accomplishes quality and organization mission by completing tasks and responsibilities as needed. Keeps measurement equipment operating by following operating instructions and calibration requirements and calling for repairs. Maintains safe and healthy work environment by following standards and procedures and complying with legal regulations. Support the engineering manager or take ownership in resolving quality-related issues in a timely manner Recommend improvements to the production and quality control inspection process to ensure quality control. Be a team member of the quality department and support Production, Engineering and other internal departments to further the interests of the company as a whole. Requirements Written and verbal communication skills Experience with inspecting electromechanical assemblies, machined and metal fabrication highly desired. CMM experience a plus Basic math skills Excellent computer skills to include use of MS Office Attention to detail Analytic skills Documentation skills Time management skills Flexibility and able to change priorities on short notice based on production demands Hand/eye coordination Reporting skills Blueprint reading Education and Experience Requirements: High school diploma Experience with measuring devices such as meters, gauges, computers, calipers, and other measuring instruments One to two years' quality inspector experience Knowledge of ISO and QMS is highly desired Benefits 401(k) Health insurance Dental insurance Vision insurance Paid time off SPT Labtech is committed to a diverse and inclusive workplace. SPT Labtech is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

About the Role: The QC Inspector plays a critical role in ensuring that all manufactured products meet stringent quality standards and comply with industry regulations. This position involves conducting detailed inspections and tests on raw materials, in-process components, and finished goods to identify defects or deviations from specifications. The QC Inspector collaborates closely with production teams to address quality issues promptly and implements corrective actions to prevent recurrence. By maintaining accurate documentation and reporting, the inspector supports continuous improvement initiatives and helps uphold the company's reputation for excellence. Ultimately, this role ensures that only products meeting the highest quality criteria reach customers, thereby safeguarding customer satisfaction and company success. Minimum Qualifications: High school diploma or equivalent. Proven experience in quality control or inspection within a manufacturing environment. Familiarity with quality control procedures, inspection techniques, and measurement tools. Basic understanding of manufacturing processes and product specifications. Ability to read and interpret technical drawings and quality documentation. Preferred Qualifications: Certification in Quality Control or related fields (e.g., ASQ Certified Quality Inspector). Experience with statistical process control (SPC) and root cause analysis. Proficiency in using digital measurement instruments and quality management software. Knowledge of ISO 9001 or other relevant quality management systems. Strong problem-solving skills and attention to detail. Responsibilities: Perform visual and dimensional inspections of materials and products at various stages of the manufacturing process. Utilize measurement tools and testing equipment to verify product specifications and tolerances. Document inspection results accurately and report any non-conformances or quality issues to the quality control manager. Collaborate with production and engineering teams to investigate defects and implement corrective and preventive actions. Ensure compliance with company quality standards, safety regulations, and industry guidelines during all inspection activities. Maintain inspection equipment and ensure calibration is up to date to guarantee measurement accuracy. Participate in internal audits and assist in external quality audits as required. Skills: The QC Inspector applies their skills daily by meticulously examining products to ensure they meet all quality standards, using both visual assessment and precise measurement tools. Their ability to interpret technical drawings and specifications allows them to identify deviations and potential defects early in the production process. Communication skills are essential as they report findings clearly and collaborate with cross-functional teams to resolve quality issues effectively. Analytical skills support their role in conducting root cause analysis and contributing to continuous improvement efforts. Additionally, proficiency with quality management software and inspection equipment ensures accurate data recording and compliance with regulatory requirements.

Meet the Owned Brand division of REVOLVE: REVOLVE is the next-generation fashion retailer for millennial and Generation Z consumers. As a trusted, premium lifestyle brand and a go-to source for discovery and inspiration, REVOLVE delivers an engaging customer experience from a vast yet curated offering of over 45,000 products. Founded in Los Angeles in 2003 by co-CEOs, Michael Mente and Mike Karanikolas, REVOLVE's family of brands includes their luxury offering, FORWARD by Elyse Walker, and a portfolio of 24 owned brands such as Lovers + Friends, Tularosa, NBD and RAYE. The Owned Brand division within REVOLVE is an industry-leading fashion design and production house based in Los Angeles. Leveraging the power of REVOLVE's data driven merchandising, combined with raw creative talent results in an unparalleled ability to identify a specific market niches, developing brands that each have their own identity, designed with a distinct consumer interest and personality in mind. At REVOLVE the most successful team members have the thirst and creativity to redefine fashion retail for the 21st century, making REVOLVE THE leading online retail destination targeted towards Millennial and Generation Z consumers seeking premium fashion. With a team of 1,000 strong, we are a dynamic bunch that are motivated by getting the company to the next level. It's our goal to hire high-energy, diverse, bright, creative, and flexible individuals who thrive in a fast-paced work environment. In return, we promise to keep REVOLVE a company where inspired people will always thrive. Some of the sweetest perks we offer aren't in a typical benefit package like hefty discount on items we carry - as in 50% or more off retail prices, free weekly lunches, and pretty rad company parties. To take a behind the scenes look at the REVOLVE “corporate” lifestyle check out our Instagram @REVOLVEcareers or #lifeatrevolve. Are you ready to set the standard for Premium apparel? Main purpose of the Owned Brands QC Inspector role: This is a full time role for a candidate who can identify the most effective defect recovery process for each item to minimize monetary loss of defective merchandise. He or she will be heavily involved in the QC process through the speccing of garments, evaluation of garments, and providing insight on different garment issues. This is a permanent full time role for a candidate who is able to work in a fast paced, high volume, sku intensive environment while maintaining accuracy. Major Responsibilities: Essential Duties and Responsibilities include the following. Other duties may be assigned. • Accurately spec garments • Document defects into current systems • Comprehend and analyze reports to identify areas of opportunities • Effectively communicate issues to all involved parties • Communicate and interact with all cross functional departments, for pulling, mending, Returns, and any other follow ups as needed • Update QC Tracker, and other relating reports on daily basis • Minimize monetary loss of defective merchandise through defective recovery process • Identify the most effective defect recovery process for each item - RA, Restore, Sellable Defect, Other • Identify defects by inspecting defective apparel • Clearly communicate with Technical Design Team regarding defective and unacceptable merchandise • Travel as needed to the Cerritos location • Complete ad-hoc tasks and assignments as directed by management Required Competencies: To perform the job successfully, an individual should demonstrate the following competencies: • Ability to spec garments • High level of attention to detail and the ability to identify apparel construction flaws • Hands-on approach at recommending “how-to-fix” solutions quickly and efficiently • High level of apparel construction and fabrication knowledge • Strong communication, prioritizing and organizational skills • Ability to take ownership of assigned tasks and meet responsibilities without supervision • Ability to work successfully with any personality type and be a team player • Sense of urgency and ability to maintain performance quality under pressure • Flexible and adaptable to a very fast-paced environment • Must be able and willing to lift and carry up to 10 lbs., perform frequent repetitive finger, hand and wrist motions, as well as, bending, stooping, reaching, squatting, kneeling, pushing, and pulling • Must be able to sit for extended periods of time Minimum Qualifications: • Minimum 5-7 years' experience working in a QA/QC, Production or Warehouse environment required • Computer literate in Excel, Word and Email required • Technical fashion, garment construction and fabrication knowledge preferred Preferred Qualifications: • Bilingual highly preferred; proficient in English A reasonable estimate of the current base hourly/salary range is $18/hr to $19/hr. ATTENTION: After submitting your application, please check your spam folder for emails on your application status. Emails are sent from an ADP email address.

TempToFT Are you detail-driven with a passion for precision electronics? Come join the team of a leading electronics manufacturer, and help ensure the highest standards in quality and compliance. Responsibilites • Conduct in-process and first article inspections using customer drawings • Record inspection results and maintain accurate QC documentation • Inspect electronic assemblies and components to IPC and ANSI Class 3 standards • Monitor wave soldering processes and verify operator self-inspections • Use microscopes and precision tools to inspect PCBs and support soldering tasks Required • High school diploma with 5+ years in EMS or OEM electronics manufacturing • Skilled in blueprint reading, assembly instructions, and IPC/ANSI/NASA standards • Experienced in ISO 9001, AS9100, NADCAP environments and AS9102 documentation • Strong English communication; familiar with AOI equipment 23.00 Qualifications High School Diploma/GED 5+ years in EMS or OEM electronics manufacturing

Astrophysics Inc. is a leading global designer and manufacturer of X-Ray security inspection systems. Since 2002, we have dedicated ourselves to ensuring a safer world through advanced X-Ray screening and imaging technology. Our systems are deployed in critical infrastructure, aviation, and ports and borders sites in more than 140 countries. Hotels, prisons, courthouses, embassies, airports, military bases, and government buildings around the world depend on us for their safety and security. Astrophysics is an expanding, dynamic and fast-paced company looking for individuals who want to grow with us and be a part of a meaningful security mission. We currently have an immediate full-time position opening for a Quality Control Inspector located in City of Ontario, California. Job Summary: The Quality Control Inspector I is responsible for the inspection of x-ray imagining systems and components based on established inspection criteria. Inspections consist of verifying software and hardware functionality. Inspections also include verifying and approving the visual aspects of each unit, paperwork, electrical and imaging inspections. All inspection activities will be recorded on appropriate forms. Essential Duties: • Perform in-line quality inspections to insure product is produced in accordance to documented procedures, work/assembly instructions, and/or drawings. • Perform Final QC inspections as per documented procedures. Properly fill out form F-82-03-06 Final Quality Control Report • Review final QC inspection paperwork and imaging with Quality Control Supervisor or Quality Control Inspector III before release to shipping. • Verify that all paperwork from previous operations are properly filled out before release of product. • Prepares reports of findings and report inspection and test data to the Quality Control Supervisor • Follow daily work assignments as delegated by the Quality Control Supervisor. • Upon successful completion of final inspections, release product to the shipping department. • Perform QC paperwork maintenance assignments such as sorting, filing and copying as determined by the Quality Supervisor. • Assists with QC line inspections, i.e.: Label Placement, QC report, Packaging • Identify the procedure required to conduct quality test and inspections. • Follow inspection procedures as outlined in SOP-82-03 Quality Control Inspections. Line Inspection • Perform line inspection by performing audits of paperwork, labels, and visual inspection of frame & panels. • Perform line inspections as per documented procedures • Operates independently from the production function, to assess and determine quality status of goods at each stage. • Follow up and maintain all documentation regarding incoming inspection Education and Experience: • Strong attention to details, highly organized • Computer literate to include experience in navigating and manipulating file systems • Ability to multi-task and work in a fast paced environment • Effectively deal with personnel from other departments • Ability to read and write in English • High school diploma or equivalent • 0-2 years similar work experience required • Very good understanding of measuring techniques and tolerance call-outs • Proficient in the use of measuring equipment such as rulers and micrometers. • Experienced in visual inspections to determine material defects and paint imperfections Excellent benefit package including 401K plan with Employer Match 11 Paid Holidays, 10 PTO Days, Free Donuts on Fridays, Company Luncheons and year end Party! PLEASE APPLY AT: ************************************************** Equal Opportunity Employer Astrophysics Inc. provides equal employment and advancement opportunities to all individuals. Employment decisions at Astrophysics Inc. are based on merit, qualifications and abilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity national origin or protected veteran status and will not be discriminated against on the basis of disability. If you need assistance or an accommodation while seeking employment, please call *************** and ask for Human Resources. Determinations on requests for reasonable accommodation will be made on a case-by-case basis.