Quality inspector jobs in Rahway, NJ - 215 jobs

Raycap, Inc. is seeking a highly motivated Quality Inspector. In this role, the Quality Inspector inspects components, sub-assemblies, and finished products received and/or built internally. This position works with Quality Management to implement the proper sampling plans based on component specifications, inspection plans, or customer-supplied requirements and to provide guidance on required quality tools, methods, and data to ensure that the shipped product fulfills all customer specifications and quality requirements. This position monitors and maintains Raycap quality processes to assure continual 100% customer satisfaction. Shift: Monday - Friday (11:00 p.m. - 7:30 a.m.) with overtime as required. Primary Job Responsibilities Collects quality data as required to derive quality objectives Executes and maintains comprehensive quality product inspections Serves as a manufacturing focal point for intelligent analysis of quality issues, determining true root causes, and implementation of permanent corrective and preventive actions Follows and promotes the use of and implementation of internal quality standards and procedures Reviews documentation for compliance with quality standards Inspects First Articles, incoming components, raw materials, fabricated parts, and in-process assemblies and subassemblies, products per Inspection Plans and Specification Requirements Conducts subassembly tests as required to ensure quality products Uses measuring equipment such as calipers and gauges Audits and monitors quality requirements in accordance with the company's quality assurance policies and customer specifications Documents and reports inspection findings, results, and monitors corrective actions to the inspection findings Regular adherence to performance of applicable procedures in the Quality Management Systems (QMS), Environmental Management (EMS), and Occupational Health & Safety standards (OHSAS); ensuring processes remain sustainable, suitable, and effective in relation to the position Continuous assessment of opportunities for improvement and any needed changes to management systems Qualifications Hands-on quality and manufacturing experience in an ISO certified environment. Proficient in MS Office, Access, Outlook, and Adobe programs Experience with Document Control software Familiarity with SAP, ISO-9001, knowledge and application of DFx, FMEA, or similar Quality Systems is a plus Who We Are Raycap, Inc. creates products that protect and support the world's most valuable assets. We support advanced solutions for telecommunications, renewable energy, transportation, defense, and other applications worldwide. We offer A competitive benefit package Paid Time Off from day one 10 annual company-paid holidays A Tuition Reimbursement program A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, gender identity, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today! Quality Control Inspector III/ CMM Programmer Overview: The Quality Control Inspector/Programmer is responsible for visual and dimensional inspections on manufactured parts, assemblies, and/or sub-assemblies. This role inspects parts to engineering drawings, customer purchase order(s), work orders, industry standards, and specifications. The inspector may report detailed inspection accept / reject information directly to the customer with shipments. Minimum Required Qualifications : Technical school diploma or equivalent combination of education and experience. Minimum 5-7 years' experience with Mechanical / Electronic part inspection in a manufacturing or production Environment. Experience in quality with machined / mechanical parts using GD&T interpretation, able to do programs for automatic inspection with Optical Vision Systems and CMMs. plus. Able to use Profilometers and special Microscopes for visual characteristics with other measuring tools and instruments. Knowledgeable with AS9102 FAIR (First Article Inspection Report) documentation and Inspection. Familiar with AQL, sampling methods and traceability. Strong verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, as well as any and all outside agents, including but not limited to; vendors, suppliers, customers, etc. Strong computer literacy, with MS Office/PC expertise and demonstrated experience with applicable systems, programs, equipment, etc. Must be a US Citizen. Essential or Primary / Key Responsibilities : Train other inspection personnel on CMM software and manual measurement techniques. Perform Mechanical measurements and visual quality assessments of received items, work-in-progress and finished goods. Performs 1 st Piece Inspection on machined parts and inspection for product Quality Analysis. Inspect with thread gages, GO/NO-GO plug gages, V-Blocks, Gage Blocks, height stands, dial indicators, various types of ID/OD micrometers, inspection of thread Pitch Diameter with special gages. Generate spreadsheets for data collection, evaluate history of product and recommend on Sample Size as per an AQL Reconcile final inspection documentation for shipments Interact with source inspector as needed and part-take in source inspection duties if necessary. Read, understand and interpret Mechanical/Electronic drawings. Approve incoming materials by confirming specifications, conducting visual and physical measurement of the product., rejecting if necessary and processing part thru to the next step. Approve in-process production by confirming specifications, conducting visual, physical measurement and physical measurement of the product., communicating required adjustments to production supervisor. Approve finished products by confirming specifications, conducting visual and physical measurement of the product. Document inspection results by completing reports and logs, summarizing re-work and waste, and inputting data into quality database Always verify equipment is operational and calibrated, follow operating instructions and coordinate repairs Work with Engineering, Operations, and other sources to resolve issues and meet goals Additional Duties / Responsibilities : Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required). Maintain and continue to elevate relationships with Business Development, Engineering, Operations, Customer Service and all other facets of the company Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization Actively participate in team meetings, improvement initiatives/programs, etc. to provide constructive recommendations and initiate actions to support company initiatives/goals Consistently demonstrate commitment to company values Keep management informed of area activities and of any significant problems Assume responsibility for related duties as required or assigned Ensure that work area and work areas of direct reports are clean, secure, and well maintained Complete special projects and miscellaneous assignments as required Work Environment : While performing the duties of this job, the employee can be exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment may be loud. This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required). This is a full-time position. Overtime and weekend work may be required as job duties demand. Travel is rare but may be required to coordinate proper CMM inspection techniques with Suppliers. . Physical Requirements : While performing the duties of this job, the employee is regularly required to talk and hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Vision and color vision must pass job-required vision screening The employee is occasionally required to sit; climb or balance; and stoop, kneel, or crouch The employee may be required to lift and/or move items weighing up to 25 pounds. This position is at our Montville, NJ office location. Pay Range: $30.50 - $38.00/hour Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at *************** to learn more about us and to apply. Check out all of our openings at VETERANS ARE ENCOURAGED TO APPLY No agencies, please. Pay Range: $30.50 - $38.00 per hour

If you're looking for a special place to build or grow your career, you've found it. Whether you're an experienced professional, a recent college graduate or somewhere in between, IDEX is a place where you can apply your existing skills and learn new ones in an environment where you can make an impact. With interesting opportunities in engineering, marketing, sales, supply chain, operations, HR, finance, and more across more than 40 diverse businesses around the globe, chances are, we have something special for you. SUMMARY The Quality Inspector Level I is responsible for performing standardized quality control checks on products to ensure they meet the required legal and company standards for safety and quality. Other requirements include maintaining calibrated test equipment and preparing test data. ESSENTIAL DUTIES AND RESPONSIBILITIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ensure parts are inspected to meet production goals, including cycle time, quantity and quality. Operate Aberlink and Zeiss automated Coordinate Measuring Machine (CMM) software to measure and analyze data. Accurately align parts on the CMM and identify relevant features for measurement. Interpret CMM measurement data and identify potential quality issues. Perform dimensional inspection as per applicable inspection plan. Measure and check dimensions and tolerances using measuring devices, including (but not limited to) calipers, micrometers and gauges. Read and interpret basic engineering drawings. Complete inspection reports with results as displayed on the equipment. Record non-conforming material within the proper logs and alert supervisor as required. Perform necessary transactions in ERP system to maintain accurate inventory. Perform daily maintenance on CMM equipment; conduct routine checks to ensure equipment is within calibration and functioning safely and properly. Maintain a clean and safe workplace. Perform daily 6S activities to ensure organization and cleanliness of work area. Other duties as assigned Education and/or Experience High school diploma or GED or related experience and/or training: or equivalent combination of education and experience 2+ years of relevant experience in a high-volume manufacturing environment Basic understanding on automated inspection equipment (CMM, vision system) Basic understanding of Geometric Dimensioning and Tolerancing (GD&T) preferred Previous experience working within an ISO9001 certified facility preferred Qualifications Proficient in the use of basic measuring equipment (caliper, micrometer, air gauge, etc..) Ability to read and understand basic engineering drawings Ability to assess visual drawing requirements Ability to work alone with minimal supervision Ability to collect data and interpret results Must demonstrate a good attention to detail and the ability to communicate effectively both verbally and in writing Basic math, computer, and keyboard skills to work within the ERP system Must be 18 years of age or older Must be authorized to work in the US PHYSICAL DEMANDS: The physical demands described here are represented of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to lift up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. WORKING CONDITIONS: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Shop floor working environment. Employee may work in a loud environment. Appropriate Personal Protective Equipment (PPE) is required at all times in the shop floor. Noise Level is minimal with intervals of spikes. Are you ready to join a different kind of company where our people, our culture, and our commitments are centered around providing trusted solutions that improve lives around the world? Total Rewards The compensation range for this position is $35,800.00 - $53,600.00, depending on experience. This position may be eligible for performance based bonus plan. Benefits Package Our comprehensive U.S. benefit offerings include: Health benefits, 401(k) retirement savings program with company match, PTO, and more. More information on our benefits and rewards can be found on our career page: IDEX is an Equal Opportunity Employer. IDEX gives consideration for employment to qualified applicants without regard to race, color, religion, creed, genetic information, sex, sexual orientation, gender identity or expression, marital status, age, national origin, disability, protected veteran status, or any other consideration or protected category made unlawful by federal, state or local laws. Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact our Talent Acquisition Team at [email protected] for assistance with an accommodation. These contact tools may be used only by individuals with a disability for accommodation requests. Do not inquire as to the status of an application.

NYC Health + Hospitals is the largest public health care system in the nation. We are a network of 11 hospitals, trauma centers, neighborhood health centers, nursing homes, post-acute care centers, and correctional health services. We are a home care agency and a health plan, MetroPlus. Our health system provides essential services to 1.4 million New Yorkers every year in more than 70 locations across the city's five boroughs. Our diverse workforce of more than 42,000 employees are uniquely focused on empowering New Yorkers. NYC Health + Hospitals/Correctional Health Services is one of the nation's leading correctional health care systems in quality of and innovations to care, and access from pre-arraignment through compassionate release. In-jail services include medical, nursing, mental health, substance use treatment, social work, dental and vision care, discharge planning, and reentry support. In addition to providing direct patient care in the jails, CHS leverages the resources of the nation's largest municipal health care system to help discharged patients successfully return to their communities. CHS is also a pivotal partner in New York City's criminal justice reform efforts. The Quality Assurance (QA) Radiological Technologist position encompasses responsible, administrative and clinical activity of varying degrees of latitude. Clinical level judgement is needed in the daily supervision of radiological functions and patient care, and departmental projects. Responsibilities include: Review exam orders, consult with radiologist, schedule patients and arrange for transportation as indicated. Identify patient and document all information pertinent to final report in the RIS and on images (PACS). Prepare all patients (infants, children, adolescents, adults and geriatric) for radiological procedures requested by the clinician. Arrange for proper protection of patients, public and staff from infectious diseases/materials. Perform all general diagnostic imaging and routine examination in CT and Angiography. Assists in performing daily checks of radiographic imaging equipment, immobilization devices and other necessary accessories. Enters data and maintains documents and logs as required and mandated by the department QA guidelines and various regulatory agencies. Maintains adequate stocks of supplies and materials needed for use in the department. Checks equipment for defects prior for use and assures proper use of such equipment through instruction and review. Report any unexpected patient incidents in accordance with the occurrence report protocol. Maintain and exercise all mandated radiation safety regulations. Maintain basic care of all the imaging equipment. All malfunctions are to be reported to management staff whether mechanical, electrical or suspect and service request documentation completed. Maintain a clean and safe work environment for both patients and staff. Perform other duties as deemed necessary (by supervisory or administrative staff) in the event of emergencies or disasters. Continue professional growth and development of job-related skills on an ongoing basis. Participate in continuing education activities. Ensure all examinations are accessioned, documented and sent to PACS for reading. Monitor PACS and RIS incomplete worklists to ensure all exams are completed. In accordance with HIPAA (the Health Insurance Portability and Accountability Act), staff members will exercise due diligence in ensuring patient privacy and confidentiality. Identifies activities that the network has implemented to promote patient safety and takes all necessary precautions to ensure a safe environment for patients, visitors and staff. In addition to the Radiology Technologist job functions, the QA Technologists is responsible for the following: Organize and file maintenance reports for each building in regards to dentistry and radiology x-ray equipment and ensure dentistry and x-ray equipment follow the Department of Health codes, policies and procedures. Participates in quality assurance activities, including coordination, control and maintenance of technical equipment. Establish a daily/weekly/monthly quality control routine for monitoring, evaluating, and maintenance of X-ray equipment to ensure optimal performance and stability. Documenting and maintaining records for the quality control program in accordance with applicable regulations, legal requirements, accrediting agencies and recommendations from equipment manufacturers. Performs research and participates in special projects involving evaluation of equipment and delivery of service. Work with our radiologists to obtain updated documentation of primary diagnostic monitors. Distribute/collect dosimeter badges from each employee/facility that works with x-ray equipment. Recommends area assignment of personnel to coordinate activities within the department with other activities and services and represents the department in interdepartmental operations and meetings. May be assigned duties and responsibilities of X-ray Director in regards to radiology department workflow. Minimum Qualifications: Assignment Level III 1. For Supervisory Assignments: a valid license and current registration to practice Diagnostic Radiography as a Radiologic Technologist issued by the NYSDOH; and two (2) years of Radiologic Technologist experience performing duties consistent with Assignment Levels I and II, one (1) year of which must have been in a supervisory capacity. 2. For Specialized Imaging Assignments: a valid license and current registration to practice Diagnostic Radiography as a Radiologic Technologist issued by the NYSDOH; and possession of a current advanced- level certification for the performance of these procedures. NYC Health and Hospitals offers a competitive benefits package that includes: Comprehensive Health Benefits for employees hired to work 20+ hrs. per week Retirement Savings and Pension Plans Paid Holidays and Vacation in accordance with employees' Collectively bargained contracts Loan Forgiveness Programs for eligible employees College tuition discounts and professional development opportunities College Savings Program Union Benefits for eligible titles Multiple employee discounts programs Commuter Benefits Programs

As Saab, Inc. is growing in East Syracuse, NY, we are seeking a Senior Quality Inspector, In-Process Inspection to: Authorize assembly process completion and support the build team with in-process inspections during the build process. Validate visually and dimensionally that the product meets requirements compared to engineering drawings. Inspect for defects in surfaces, fasteners, sealant, paint, and testing. Compile technical data and reports to provide feedback on final inspection results and recommended corrective actions. Develop deviation reports and represent quality at the Material Review Board. Be responsible for non-conforming material processes and procedures. Deliver high level of workmanship in inspection processes for structural assembly and system installations. Experienced in quality management systems and become a subject matter expert in the company management system. Participate in tooling validation and application to meet product requirements in quality and efficiencies. Develop standardization for working procedures for high repeatability. Compensation Range: $28.08 - $33.70 per hour The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: High school degree or equivalent required. Technical degree or certification in the field of electro/mechanical assembly, mechanics, or maintenance is preferred. 5+ years of qualified inspection experience in manufacturing. Experience with ISO/AS9100 and highly standardized processes. Strong communication skills and ability to work as a team. Proficiency interpreting engineering drawings and specifications in written and digital format required. Ability to execute the appropriate working methods and select the right tools to meet the right level of quality and efficiency. Ability to work with standardized procedures for high repeatability in a highly advanced and connected environment. Excellent communication and team working skills. Physical Requirements: Must be self-mobile and able to stand for extended periods. Ability to perform physical tasks such as sitting, bending, stooping, walking, climbing, reaching during a normal workday. Ability to perform repetitive motions (such as lifting or assembly of parts) including the use of hand held power tools. Ability to lift up to fifty (50) pounds. Hearing and vision within normal ranges is important for conversations, and to receive ordinary information and directives from Production Supervisors and management as required. Ability to work extended hours when required. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Inspection and Testing: Perform routine inspections and tests on finished goods and/or components according to established procedures and specifications. This may involve physical inspections, physiochemical analyses, or using specialized functionality testing equipment. Documentation and Record Keeping: Maintain accurate and complete records of all inspections, tests, and results. This includes entering data into databases, filing reports, and maintaining laboratory inspection plan. Equipment Maintenance and Calibration: Assist in the routine maintenance and calibration of laboratory equipment. Ensure that all equipment is in good working order and meets required standards.

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role Description: Arcadis is seeking a highly skilled and motivated Quality Inspector to support one of the most iconic and consequential infrastructure initiatives in the United States - the Gateway Hudson Tunnel Project (HTP). In this role, you will be responsible for conducting inspections, audits, documentation reviews, and collaborating with project teams to resolve quality issues. We are working in partnership with Parsons and Mace as part of the MPA Delivery Partner team, selected by the Gateway Development Commission to deliver this transformative project. The HTP is a critical component of the broader Gateway Program - one of the most ambitious and impactful transportation initiatives in the nation - and is designed to strengthen mobility, enhance resiliency, and ensure the long-term reliability of the Northeast Corridor. The project encompasses the construction of a new, two-track rail tunnel beneath the Hudson River, along with the full rehabilitation of the existing 113-year-old North River Tunnel. This vital infrastructure supports more than 200,000 daily passengers via Amtrak and NJ TRANSIT and serves as a backbone for economic activity and connectivity between New York and New Jersey. This is more than just a job - it's a once-in-a-generation opportunity to contribute to a nationally significant infrastructure program that will reshape rail transportation, drive sustainable economic growth, and improve regional accessibility for millions. As part of this high-performing, multidisciplinary team, you will help deliver excellence on one of the most technically complex and high-profile projects in the world. If you're seeking to make a meaningful, lasting impact - while advancing your career alongside some of the best minds in the industry - this is your moment. Role Accountabilities: Quality Assurance & Control * Conduct inspections of construction activities, materials, and workmanship to verify compliance with project specifications, drawings, and standards. * Support the implementation of the project's Quality Management Plan and related procedures. * Perform quality audits of contractors and subcontractors to confirm adherence to package-specific quality processes and procedures. * Review and verify contractor compliance with approved testing and inspection plans, including evaluation of test results and maintenance of up-to-date testing logs. Documentation & Reporting * Review quality documents from contractors and provide feedback and recommendations to project management and stakeholders. * Maintain systematic, retrievable records of all testing, inspection, acceptance activities, and outstanding punch list items. * Document any nonconforming work in Nonconformance Reports, verify completion of corrective actions, and monitor resolution of quality issues. * Prepare and submit quality-related reports, including daily, monthly, and quarterly summaries as required. Materials Testing & Inspection * Coordinate and monitor materials testing required under project contracts, including off-site lab testing performed by independent testing organizations. * Ensure that all materials used in construction meet specified standards and regulatory requirements. Project Coordination * Collaborate with resident engineers, contractors, and other project team members to resolve quality issues and support continuous improvement. * Participate in meetings, technical briefings, and coordination sessions related to quality assurance and control. Compliance & Safety * Ensure all quality activities comply with federal, state, and local codes, standards, and permitting processes. * Support the implementation of safety management plans and procedures as they relate to quality assurance. Required Qualifications: * Bachelor's degree in civil engineering, construction management, or a related field preferred. * Minimum 3 years of experience in quality inspection, quality assurance, or construction management on large-scale infrastructure or transportation projects. Key Skills and Abilities: * Knowledge of construction methods, quality assurance processes, and materials testing. * Familiarity with document control, inspection procedures, and quality management systems. * Proficiency with Microsoft Office and basic project management software. * Strong attention to detail and organizational skills. * Proactive attitude, eagerness to learn, and ability to take initiative. * Ability to work collaboratively in a team environment and communicate effectively with engineers, contractors, and stakeholders. * Willingness to work in the field and adapt to changing project needs. * Understanding of federal, state, and local codes, standards, and permitting processes is a plus. * Commitment to safety, quality, and continuous improvement. Preferred Qualifications: * Experience with federally funded projects and regulatory compliance is preferred. * Experience working on tunnel, rail, or major transportation infrastructure projects. Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The salary range for this position is $95,000 - $155,000. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. Join Arcadis. Create a Legacy. #LI-BB1 #LI-ONSITE #ANA-Mobility-Jobs #ANA-Construction #ANA-Gateway

Job Title: Quality Control (QC) Inspector Company: Hansome Energy Systems Employment Type: Full-Time Hansome Energy Systems is a privately held industry leader in rotating electrical machinery, proudly supporting the U.S. Navy and other critical defense and industrial applications. We specialize in high-performance, precision-engineered equipment designed, built, and inspected to perform in the most demanding environments. Our commitment to quality, reliability, and mission readiness is the foundation of our work. Location & Facility Transition This position is currently based at our Linden, NJ facility and will be relocating to our new East Windsor, NJ facility. Candidates must be able to work in Linden during the transition and remain with the company through the move. Position Overview Hansome Energy Systems is seeking a highly detail-oriented Quality Control (QC) Inspector to ensure that mechanical and electrical components meet stringent defense and industrial quality standards. This role is critical to ensuring product reliability, regulatory compliance, and flawless execution of mission-critical equipment. The QC Inspector will perform dimensional inspections, documentation review, in-process checks, and final inspections. Key Responsibilities Perform incoming, in-process, and final inspections on mechanical, electrical, and precision-machined components. Verify parts and assemblies against drawings, specifications, and quality standards. Use precision measurement tools such as calipers, micrometers, height gauges, bore gauges, dial indicators, and other inspection equipment. Inspect for workmanship, proper assembly practices, dimensional accuracy, and material conformity. Document inspection results, discrepancies, and nonconformances clearly and accurately. Assist with root-cause investigations and corrective actions when defects are detected. Review manufacturing documentation such as travelers, work instructions, certificates of compliance, and material certifications. Ensure products meet all requirements before release to the next production stage. Collaborate closely with production, engineering, and quality teams to resolve issues. Support continuous improvement and maintain compliance with internal and external quality requirements. Qualifications Required High school diploma or equivalent. 1-3 years of experience in quality inspection or manufacturing. Strong understanding of mechanical drawings, tolerances, and inspection requirements. Proficiency with measurement tools such as calipers, micrometers, and gauges. Strong attention to detail, accuracy, and documentation skills. Ability to lift up to 50 lbs and stand for extended periods. Ability to work in Linden, NJ during the transition and relocate to East Windsor, NJ upon facility move. Must be a US Citizen Preferred Experience in defense, aerospace, or other high-reliability manufacturing environments. Familiarity with quality systems such as ISO 9001 or MIL-STD requirements. Experience with nonconformance reporting (NCR), MRB processes, or internal audits. Basic electrical knowledge or experience inspecting rotating electrical equipment. Experience with statistical process control (SPC) or advanced measurement tools (CMM, height gage, etc.). Work Environment Full-time, on-site QC inspection role. Work involves manufacturing floor, inspection stations, and documentation work areas. Exposure to shop environments, machinery, and moderate noise (with proper PPE). Quality- and safety-focused culture supporting defense and industrial programs. Benefits Competitive compensation Health, dental, and vision insurance Paid time off and holidays Retirement plan options Ongoing training and skill development Opportunity to ensure quality for products supporting U.S. Navy and critical applications How to Apply Qualified candidates are encouraged to submit their resume and/or application to the Hansome Energy Systems hiring team.

Changing lives. Building Careers. Joining us is a chance to do important work that creates change and shapes the future of healthcare. Thinking differently is what we do best. To us, change equals opportunity. Every day, our colleagues are challenging what's possible and making headway to innovate new treatment pathways to advance patient outcomes and set new standards of care. The Quality Inspector II will be responsible for performing quality assurance inspections on purchased components, manufactured sub-assemblies and final product. The Quality Inspector will perform all duties in accordance to the requirements of overall corporate policies, FDA regulations, ISO 9001, ISO 13485, the medical device directive, and the other applicable regulatory agencies. Expectations are to be familiar with and able to measure critical dimensions. ESSENTIAL DUTIES AND RESPONSIBILITIES Perform inspection by using a variety of inspection measuring and test equipment to determine acceptance or rejection of material or parts. Perform first article, incoming/receiving, and in-process inspections of materials or parts; determine acceptance or rejection after inspection and/or testing of materials, parts, and/or equipment. Interpret and work within the guideline of drawings, specifications, charts, procedures, and other data to determine acceptance or rejection of materials. Read and interpret sampling pan as per the American national standard institute (ANSI), Assist in the review and disposition of non-conforming material and customer returned material, including rework, scrap, and return to vendor. Maintain accurate and current inspection and/or testing records such as nit not limited to Material Certifications, Inspection/Test Results and reports, Certificates of Conformance, Rejection reports/tags, as required by applicable procedure and/or specification. Coordinate and inform other departments of inspection and/or testing status in support of production and project goals and initiatives. Promote and participate in continuous improvement initiatives. Responsible for the maintenance of appropriate conditions of all quarantine locations. Maintain the QC inspection areas in an orderly fashion conducive to carrying out safe and efficient inspections and procedures. Inspection requirements include training and working in classified clean rooms as necessary to perform in process inspections. Maintain records of inspection and all testing performed on the appropriate test records. Perform line clearances and quality reviews in manufacturing, labeling, or other assigned areas during manufacturing activities. Identify and implement opportunities for continuous improvement, including document revisions in order to maintain accurate SOPs. Provide quality support to various departments as needed, e.g. engineering, product development, etc.) Assist in training new associates according to the Quality System Regulations and company SOPs as applicable. May also perform other related duties, responsibilities, and special projects as assigned. DESIRED MINIMUM QUALIFICATIONS Associate degree in science is preferred. 3-7 years of relevant GMP/GLP experience specific to incoming, line clearance, in-process, and finished goods inspections in pharmaceutical or medical device industry. QA experience in the medical device industry preferred. Must have strong written and verbal communication skills. Strong organizational skills, self-directed, strong problem solving and interpersonal skills. Knowledge of CAPA, Validations, Change Control, preferred. Working knowledge of ISO 13485, 21CFR820 FDA QSR, and cGMP. Knowledgeable in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook) preferred. Salary Pay Range: $21.12 - $27.98 USD Hourly Our salary ranges are determined by role, level, and location. Individual pay is determined by several factors including job-related skills, experience, and relevant education or training. In addition to base pay, employees may be eligible for bonus, commission, equity or other variable compensation. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. Additional Description for Pay Transparency: Subject to the terms of their respective plans, employees and/or eligible dependents are eligible to participate in the following Company sponsored employee benefit programs: medical, dental, vision, life insurance, short- and long-term disability, business accident insurance, and group legal insurance, and savings plan (401(k)). Subject to the terms of their respective policies and date of hire, Employees are eligible for the following ******************************************* Integra LifeSciences is an equal opportunity employer, and is committed to providing equal employment opportunities to all qualified applicants and employees regardless of race, marital status, color, religion, sex, age, national origin, sexual orientation, physical or mental disability, or protected veteran status. This site is governed solely by applicable U.S. laws and governmental regulations. If you'd like more information on your rights under the law, please see the following notices: EEO Is the Law | EOE including Disability/Protected Veterans Integra LifeSciences is committed to provide qualified applicants and employees who are disabled veterans or individuals with disabilities with needed reasonable accommodations in accordance with the ADA. If you have difficulty using our online system due to a disability and need an accommodation, please email us at ***********************. Unsolicited Agency Submission Integra LifeSciences does not accept unsolicited assistance from search firms for employment opportunities. All CVs/resumes submitted by search firms to any employee at our company without a valid written search agreement in place for this position will be deemed the sole property of our company. No fee will be paid in the event a candidate is hired by our company as a result of an agency referral where no pre-existing agreement is in place. A formal written agreement is required before engaging any agency, and it must be executed and authorized by the Vice President, Talent Acquisition. Where agency agreements are in place, introductions (the initial sharing of a candidate's name, resume, or background) are position-specific and may only occur within the scope of that approved agreement. Please, no phone calls or emails. Integra - Employer Branding from Integra LifeSciences on Vimeo

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking an Inspector I Petroleum to join our Caleb Brett team in Carteret, NJ. This is a fantastic opportunity to grow a versatile career in the Petroleum Inspection field. Intertek is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. What are we looking for? The Inspector I Petroleum is responsible for measuring, sampling, and reporting findings on bulk petroleum and refined products. This position will travel at least 30% of the time. Shift/Schedule: Inspector will work six consecutive days, followed by two days off, on an on call / as needed basis. This includes holidays and weekends. Salary & Benefits Information The base wage or salary range for this position is $20 - $28 per hour. Individual compensation packages are based on a variety of factors unique to each candidate including skill set, experience, qualifications, and other job-related reasons. In addition to competitive compensation packages, when working with Intertek you can expect benefits including medical, dental, vision, life, disability, 401(k) with company match, generous vacation / sick time (PTO), and more. What you'll do: Understand and adhere to Caleb Brett safety procedures. Able to perform by specified methodology the below duties in addition to completing the associated paperwork. Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, rail cars, tank trucks and vessels. Custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks and vessels. Perform routine equipment calibration, verification and function checks. Verify and communicate the results obtained and make the entries into the appropriate media, whether print or electronic, required to ensure the validity and traceability of the information. Provide on the job assistance and receive training from more experienced inspectors. Communicate and coordinate with terminal, transport and company personnel to promote smooth exercise of duties assigned. Monitor the availability of the supplies needed for the above processes, and to make any needs for such supplies known to the Dispatcher or Coordinator. Organize and coordinate jobs so that services are rendered, and reports and samples are submitted in a timely manner. Maintain work areas, records and equipment in a clean, organized and functional condition. This position outline is a general guideline and does not represent all encompassing details. The position assumes that the incumbent has both the mental and physical requirements to carry out the above defined duties. Minimum Requirements & Qualifications: Must have grasp of basic mathematics including fractions and work in an automated environment. 0 - 6 months experience. Ability to work on an on-call basis, including weekends and holidays. Valid Driver's License and reliable driving record required. Reliable Personal Transportation Required. Work vehicle provided; business use only. Must have or be able to obtain a Transportation Worker Identification Credential (TWIC). Model Intertek's 10X Energies at all times within the workplace, practicing business the right way. Be aware of, and adhere to, safety practices and policies to ensure your own safety, as well as the safety of others who may be affected by your actions at work. Ability to work in fast-paced, multi-tasking environment with shifting priorities and demanding deadlines. Must be detailed-oriented and able to effectively prioritize and organize workload, with efficient time management. Ability to communicate and interact effectively in verbal written and presentation formats. Must possess the fundamental technical and administrative skills required to perform the job duties. Must be customer focused and quality driven. Ability to travel as business needs dictate. Preferred Requirements & Qualifications: TWIC credentials Some experience as a Petroleum Inspector or Sampler

The Quality INSEPCTOR position will be responsible for inspection of all incoming raw materials and finished products. Tasks will require use of calipers, micrometers, gauges, optical comparator, drawing comparisons and other inspection tools - candidate MUST have experience with relevant equiptment. Report, analyze and trend quality data (i.e. non-conforming material and inspection results). Work directly with suppliers to address quality concerns and assess performance. Responsible for specific quality programs as assigned, other related responsibilities as follows: Ensures company standard practices and cGMP procedures are followed. Issue Batch Records to production and Finished Good inspection records to Operations Maintains SOP binders and updates such through approved Change Controls. Participate in internal and external audit process Inspect and evaluate all incoming components and labeling Inspection and testing of finished goods Authorize release of Quarantined components for production use Responsible for calibration schedules for testing and production equipment PROVIDE SALARY HISTORY TO BE CONSIDERED Qualifications Relevant quality experience along with cGMP and 2 years experience preferred. Experience with FDA compliance regulations a plus Additional Information To be considered you MUST provide the following: Current resume Full Salary History Salary & Benefits : Salary will be based on experience Medical Benefits package available Schedule - F/T Monday to Friday 7:30 to 4:00 pm PLEASE NO RECRUITERS OR SOLICITATIONS! All your information will be kept confidential according to EEO guidelines.

TopView Sightseeing is seeking a sharp, reliable, and observant Quality Control Inspector to help maintain high service standards across our sightseeing operations, including bus, boat, and bike tours. This full-time, field-based role plays a key part in ensuring safe, high-quality experiences for thousands of daily customers across New York City. Responsibilities: Conduct undercover inspections of service quality across all TopView locations and brands Monitor employee conduct and adherence to safety protocols and company standards Perform passenger counts and compile data for internal industry analysis Inspect competitor operations and provide detailed reports Document and report inspection results, policy violations, and improvement suggestions Collaborate with operations leadership to enhance service quality Requirements: High school diploma or GED Experience in supervision, inspection, or monitoring preferred NYC tourism experience is a plus Strong attention to detail and ability to collect and report accurate data Must have a smartphone and familiarity with Google Apps Professional, trustworthy, and presentable Excellent communication skills and a proactive attitude Must be comfortable working 100% in the field, including weekends and holidays Benefits: Health insurance 401(k) Paid time off Join a fast-growing company and help shape the quality of NYC's top sightseeing experiences-apply today! Powered by JazzHR AEzMzKURVa

Quality Inspector - 3rd Shift Join a quality‑driven manufacturing and laboratory environment where your attention to detail directly impacts product integrity and customer satisfaction. As a Quality Inspector, you'll play a key role in verifying incoming materials, supporting lab operations, and ensuring compliance with cGMP and QA standards. What You'll Do + Inspect incoming components and lab‑prepared samples to verify compliance with specifications, including appearance, dimensions, and overall integrity. + Perform sampling and submission activities, including pulling samples from multiple pallets, completing submission forms, and making pass/reject decisions based on lab test results. + Document all inspection activities accurately and consistently in alignment with SOPs, QA requirements, and audit expectations. + Maintain compliance within the lab, ensuring proper labeling, cleanliness, and adherence to cGMP protocols. + Assist with investigations related to out‑of‑spec results and support corrective and preventive action (CAPA) efforts. + Collaborate with QC team members to uphold a strong culture of safety, accuracy, and continuous improvement. Top Skills & Experience + Component and material inspection + Quality Control / Quality Assurance + Laboratory environment experience + GMP knowledge and compliance + Strong documentation and organizational skills Additional Qualifications + Ability to work independently while maintaining high attention to detail + Experience with component‑level inspections and lab‑based quality systems + Strong communication skills and a commitment to accuracy and consistency Experience Level + Intermediate level; prior QC or inspection experience preferred This position is moving fast! If interested please send over your updated resume to carendas @actalentservices.com with your availability for a 5 minute phone screen. Job Type & Location This is a Contract to Hire position based out of Wharton, NJ. Pay and Benefits The pay range for this position is $23.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Wharton,NJ. Application Deadline This position is anticipated to close on Jan 20, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

: Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has over 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: Responsible for the return to service of all assigned articles to include completion of all work orders and all other required documentation from pre-planning to delivery of the aircraft. Physically inspect aircraft, aircraft components, and review paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. Major Duties and Responsibilities: Determine inspection status of aircraft in for scheduled inspection, as assigned. Audit of inspection and maintenance work packages generated by the repair station during the performance of maintenance and repair. Work with production personnel, Team Leaders, Lead Technicians and Technicians to ensure accurate and complete documentation of work performed in company work order packages. Generation of maintenance record entries for aircraft, engines, propellers, and accessories maintained by the repair station in accordance with 14 CFR Part 43 and the requirements of this repair station manual. Includes completion of FAA forms 337 and 8130-3 as required. Assist in surveillance of the repair station facilities and procedures and report results to the Chief Inspector. Assist the Quality Assurance Manager and Chief Inspector in the development of improved methods and procedures for the performance of quality assurance functions. Assist the Quality Assurance Manager and Chief Inspector in the maintenance of the technical publication libraries throughout the repair station. Assist the Quality Assurance Manager and Chief Inspector in the tracking and calibration of inspection and test equipment used by the repair station for the purpose of product acceptance. The proper execution of Malfunction or Defect Reports, FAA Form 8010-4 when required. This report will be submitted to the FAA within 96 hours after the malfunction or defect has been discovered in accordance with 14 CFR§145.221. Assist the Quality Assurance Manager and Chief Inspector as necessary in the receiving inspection of parts or material forwarded to him by the receiving inspector. 1 Assuring proper documentation of the preliminary inspection, hidden damage inspection, and final inspections of all items processed as assigned. Make entries into maintenance logs & work orders IAW 14 CFR Part 43 and Operator/Air Carrier manuals. Maintaining Quality Department work areas in a clean and orderly manner. Assist the Quality Assurance Manager and Chief Inspector as dire Knowledge, Skills and Abilities: Knowledge of inspection techniques and tools within an FAA 145 repair station. Thorough understanding of FAR's and regulations pertaining to aircraft maintenance part 145. High mechanical aptitude. Ability to read schematics and blueprints. Be proficient with PC and be familiar with MS office. Knowledge of quality control. Ability to interact with a group of coworkers. Ability to work with complex equipment. Ability to establish procedures. Ability to work in a production-oriented environment. Ability to work under frequent changing priorities. Ability to select and evaluate priorities. Ability to read and comprehend documentation written in the English language. Problem-solving and decision-making skills. Good written and verbal communication skills. Self-starter with the ability to multi-task and prioritize workday/projects independently. Ability to travel. Work Conditions & Physical Requirements: The employee must occasionally lift and/or move up to 50 pounds Stands at least 75% of each workday. Other motions: standing; walking; repetitive motion hand - wrist; fingering; grasping; feeling; handling; hearing; talking; seeing; eye-hand coordination. High organizational, time management and logic skills required Ability to work at a desk in an office environment for extended periods of time Availability during nights, weekends, & holidays as needed. Must be capable of maintaining a flexible schedule, including the willingness to occasionally work extended hours as per project demands and organizational needs. Travel: Some travel is required. Required Education/Experience: Minimum ten years of experience in maintaining aircraft with verifiable practical experience as an active aircraft mechanic in a maintenance organization. Minimum of five years of experience in a supervisory position in a maintenance organization. Minimum of ten years of experience in a Part 145 environment. Must have a thorough working knowledge and understanding of FARs, aircraft technical bulletins, service bulletins, airworthiness directives, aircraft systems, and the ability to communicate this knowledge to the required persons. Previous Director of Maintenance or Chief Inspector experience preferred. FAA Airframe and Power Plant Certification or license (A&P) Must have and maintain a valid driver license and must meet the company's vehicle insurance requirements. Subject to pre-employment and random drug testing. Must pass a background check. Direct Reports: This role has direct reports. Work Authorization: Must be authorized to work in the United States of America. Compensation: Competitive pay based on experience Medical including Health, Dental and Vision Short-Term and Long-Term Disability Insurance Paid Holidays Paid Vacation Profit Share Program

Job DescriptionDescription: : Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has over 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: Responsible for the return to service of all assigned articles to include completion of all work orders and all other required documentation from pre-planning to delivery of the aircraft. Physically inspect aircraft, aircraft components, and review paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. Major Duties and Responsibilities: Determine inspection status of aircraft in for scheduled inspection, as assigned. Audit of inspection and maintenance work packages generated by the repair station during the performance of maintenance and repair. Work with production personnel, Team Leaders, Lead Technicians and Technicians to ensure accurate and complete documentation of work performed in company work order packages. Generation of maintenance record entries for aircraft, engines, propellers, and accessories maintained by the repair station in accordance with 14 CFR Part 43 and the requirements of this repair station manual. Includes completion of FAA forms 337 and 8130-3 as required. Assist in surveillance of the repair station facilities and procedures and report results to the Chief Inspector. Assist the Quality Assurance Manager and Chief Inspector in the development of improved methods and procedures for the performance of quality assurance functions. Assist the Quality Assurance Manager and Chief Inspector in the maintenance of the technical publication libraries throughout the repair station. Assist the Quality Assurance Manager and Chief Inspector in the tracking and calibration of inspection and test equipment used by the repair station for the purpose of product acceptance. The proper execution of Malfunction or Defect Reports, FAA Form 8010-4 when required. This report will be submitted to the FAA within 96 hours after the malfunction or defect has been discovered in accordance with 14 CFR§145.221. Assist the Quality Assurance Manager and Chief Inspector as necessary in the receiving inspection of parts or material forwarded to him by the receiving inspector. 1 Assuring proper documentation of the preliminary inspection, hidden damage inspection, and final inspections of all items processed as assigned. Make entries into maintenance logs & work orders IAW 14 CFR Part 43 and Operator/Air Carrier manuals. Maintaining Quality Department work areas in a clean and orderly manner. Assist the Quality Assurance Manager and Chief Inspector as dire Knowledge, Skills and Abilities: Knowledge of inspection techniques and tools within an FAA 145 repair station. Thorough understanding of FAR's and regulations pertaining to aircraft maintenance part 145. High mechanical aptitude. Ability to read schematics and blueprints. Be proficient with PC and be familiar with MS office. Knowledge of quality control. Ability to interact with a group of coworkers. Ability to work with complex equipment. Ability to establish procedures. Ability to work in a production-oriented environment. Ability to work under frequent changing priorities. Ability to select and evaluate priorities. Ability to read and comprehend documentation written in the English language. Problem-solving and decision-making skills. Good written and verbal communication skills. Self-starter with the ability to multi-task and prioritize workday/projects independently. Ability to travel. Work Conditions & Physical Requirements: The employee must occasionally lift and/or move up to 50 pounds Stands at least 75% of each workday. Other motions: standing; walking; repetitive motion hand - wrist; fingering; grasping; feeling; handling; hearing; talking; seeing; eye-hand coordination. High organizational, time management and logic skills required Ability to work at a desk in an office environment for extended periods of time Availability during nights, weekends, & holidays as needed. Must be capable of maintaining a flexible schedule, including the willingness to occasionally work extended hours as per project demands and organizational needs. Travel: Some travel is required. Required Education/Experience: Minimum ten years of experience in maintaining aircraft with verifiable practical experience as an active aircraft mechanic in a maintenance organization. Minimum of five years of experience in a supervisory position in a maintenance organization. Minimum of ten years of experience in a Part 145 environment. Must have a thorough working knowledge and understanding of FARs, aircraft technical bulletins, service bulletins, airworthiness directives, aircraft systems, and the ability to communicate this knowledge to the required persons. Previous Director of Maintenance or Chief Inspector experience preferred. FAA Airframe and Power Plant Certification or license (A&P) Must have and maintain a valid driver license and must meet the company's vehicle insurance requirements. Subject to pre-employment and random drug testing. "Offer of employment is contingent upon successfully completing DOT background check screening and drug testing required by federal regulation for this role." Direct Reports: This role has direct reports. Work Authorization: Must be authorized to work in the United States of America. Compensation: Competitive pay based on experience Medical including Health, Dental and Vision Short-Term and Long-Term Disability Insurance Paid Holidays Paid Vacation Profit Share Program Requirements:

Full-time Description About Generant: Initially founded in the early 1930's, Generant designs and manufactures valves and pressure regulators for a wide variety of industries with a strong position in the Industrial Gases and Cryogenics, Medical Gases and Equipment, Energy, and Chemicals markets. Generant is 100% employee-owned and is headquartered in Butler, NJ where most valve and regulator products are manufactured. We look for dedicated and talented people who accept the responsibilities of thinking like owners and embrace our mission as stated in our Quality Policy: “Our Goal is to provide our customers, suppliers and employees true value. We believe this can only be accomplished through a strong commitment to continuous improvement in the quality of our products, services and working environment.” Our ideal candidates: Are people who are personally motivated to produce high-quality work Are lifelong learners - driven to continually improve Are well organized Enjoy working in a team environment Join our growing team and be a part of our journey! Generant is looking for a 3rd shift Quality Control Inspector Join our growing company! 3rd shift is Monday - Friday. 11:00pm - 07:30am Job Summary: The primary function of the Quality Control Inspector is to help assure the quality of finished goods and conformance to product requirements. This is accomplished by inspecting parts, checking calibration status of measurement devices, and documenting inspections and nonconformance. Essential Functions: · Conduct First Article Inspection and in-process inspections of products to ensure compliance with quality standards and specifications. · Maintain Calibration of Metrology Tools · Perform In-Process inspections, Final Inspection, Raw Material Inspection - Bar Stock, Inspection of Incoming Purchased Parts, and Outside Process Inspection · Data Entry into Quality Databases · Interpret mechanical drawings · Communicate product and material nonconformances to management. · Identify and report any deviations from quality standards to the appropriate personnel · Collaborate with production teams to resolve quality issues and implement corrective actions · Conduct root cause analysis and implement preventive measures to minimize defects and improve product quality · Maintain accurate records of inspections, test results, and quality documentation. · Assist in the development and implementation of quality control procedures and processes · Other duties as assigned Requirements Qualifications: Education/Experience/Skills: · High School Diploma or equivalent · 2+ years as a Quality Control Inspector in a manufacturing environment that produces metal pieces · Able to read and interpret engineering drawings · Must have a complete knowledge of metrology equipment and their uses including micrometers, calipers, indicators, depth micrometers, gauge pins, thread gauges and optical comparators · Advanced Math Skills · Strong knowledge of Statistical Process Control (SPC) techniques and tools · Familiarity with quality control standards and regulations · Must be able to work in a fast-paced environment · Excellent attention to detail and analytical skills · Ability to work independently and as part of a team · Fluent in English (Good Verbal and Written Communication Skills) · Ability to carryout detailed, written and verbal instructions Physical Demands: · Must frequently lift up to 25 pounds and occasionally lift up to 75 pounds · When performing the duties of this job, the employee is regularly required to sit, use hands to finger or handle or feel objects and tools or controls and talk or hear · Employee is frequently required to reach with hands and arms · Employee is occasionally required to stand, walk, stoop, kneel, crouch, or crawl · Specific vision abilities require close vision, distant vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Work Environment: · Inspector works near moving mechanical parts and is occasionally exposed to vibration · Noise level is usually moderate for a manufacturing plant Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Benefits: Medical, Dental, Vision, Employee Stock Ownership Plan (ESOP), 401k, Life and AD&D Insurance Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Marotta Controls, Inc. is one of the fastest growing technology businesses in New Jersey, specializing in the design, development, and production of precision control components and systems. Founded in 1943, Marotta has been at the forefront of Aerospace & Defense milestones for over 75 years from breaking the sound barrier on the Bell X-1 and landing the first man on the moon to playing a critical role on today's advanced U.S Navy platforms as well as the emerging commercial space industry. Our products and expertise range from high performance valves to complete sub-systems that integrate electronic controls, actuators, and power conversion systems. We have received over 200 patents for our technologies and support the most demanding applications found on military aircraft, tactical systems, submarines, surface ships, satellites and space launch vehicles. Our teams have repeatedly been recognized for outstanding performance by some of the most prestigious organizations in the world including The Boeing Company, Lockheed Martin, NASA & Northrop Grumman. Quality Inspector I (Material Review Coordinator) Overview: The Quality Control Inspector I (Material Review Coordinator), is responsible for managing the review, documentation, and control of nonconforming material in accordance with prescribed dispositions. This includes physical and electronic movement of material within the organization as well as to external providers. This role is responsible for the prompt resolution of nonconforming materials in accordance with applicable quality standards. Minimum Required Qualifications : High school diploma or equivalent is required. An Associate's or Bachelor's degree in a related field is preferred. Prior experience in a manufacturing, quality control, or materials management role is required. Experience with Material Review Board (MRB) processes or nonconformance management highly desired. Ability to work with inventory management and nonconformance tracking systems is essential. Basic understanding and interpretation of engineering drawings, standards, specifications, and certificates of conformance. Excellent organizational, communication, and interpersonal skills; strong attention to detail; ability to work independently and collaboratively in a fast-paced environment; and strong problem-solving abilities. Must be a US Citizen Essential or Primary / Key Responsibilities : Physically and electronically move piece-parts, subassemblies, and finished goods through internal processes with an emphasis on control of nonconforming material. Timely creation and processing of nonconforming records (NCRs) for nonconforming materials. Maintain accurate and detailed records of MRB activities, nonconformities, investigations, and dispositions. Monitor and maintain the inventory of materials in quarantine or designated MRB locations, performing regular cycle counts and investigating inventory discrepancies. Generate reports and metrics on MRB status, material movement, and nonconformance data to provide visibility to management and support performance targets. Read, understand, and interpret engineering drawings, purchase orders, specifications, and other requirement sources. Perform measurements and visual quality assessments of received items, work-in-progress, finished goods, and nonconforming material. When performing inspections, document inspection results by completing reports & logs and inputting data into the quality database. Verify equipment is operational and calibrated. Follow operating instructions and, when necessary, coordinate repairs. CT Scanner training and usage may be required. Adhere to all internal processes, particularly processes associated with handling of non-conforming materials. Act as the central point of communication between quality, engineering, production, and procurement teams to ensure timely resolution of material issues and effective implementation of actions. Other duties, as assigned Additional Duties / Responsibilities : Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required). Maintain and continue to elevate relationships with Engineering, Operations, Customer Service, and all other facets of the company Abide by all safety, quality, housekeeping, and company policies/procedures to ensure compliance with regulatory and internal system requirements Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization Actively participate in team meetings, improvement initiatives/programs, etc. to provide constructive recommendations and initiate actions to support organizational goals Consistently demonstrate commitment to company values Keep management informed of area activities and of any significant problems Ensure that work areas are clean, secure, and well maintained Complete special projects and miscellaneous assignments, as required Other duties, as assigned Work Environment : While performing the duties of this job, the employee can be exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment may be loud. This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required). This is a full-time position. Days and hours of work are 8 hours, Monday through Friday. Occasional overtime and weekend work may be required as job duties demand. No regular travel is expected for this position. Physical Requirements : While performing the duties of this job, the employee is regularly required to talk and hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Vision and color vision must pass job-required vision screening The employee is occasionally required to sit; climb or balance; and stoop, kneel, or crouch The employee may be required to lift and/or move items weighing up to 50 pounds. We offer a highly competitive compensation package for this outstanding position plus a quarterly bonus along with a full range of top quality benefits and employee services including: medical, prescription, dental, vision, life and disability income insurance programs, 401k retirement plans with company match, generous tuition aid program, paid vacation, sick and personal days, paid holidays and flexible work hours with compressed work week options. We recognize and reward our employee's accomplishments and host several employee engagement events per quarter. This position is at our Montville, NJ corporate offices location. Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. As a Federal Contractor, Marotta is required to have all employees vaccinated against COVID-19 or qualify for a religious or medical exemption . If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at *************** to learn more about us and to apply. Check out all our openings at We are an Affirmative Action and Equal Opportunity employer M/F/IWD/Veterans VETERANS ARE ENCOURAGED TO APPLY No agencies, please Pay Range: $25.75 - $28.00 per hour

Saab, Inc. is seeking a detail oriented Incoming Material Inspector to join our Quality team. In this role, you will be responsible for inspecting, verifying, and documenting incoming materials, components, and products to ensure compliance with quality standards, specifications, and regulatory requirements prior to release to production or inventory. Responsibilities include: Inspecting incoming materials, parts, and assemblies using visual inspection, dimensional measurements, and approved testing methods. Verifying materials against purchase orders, drawings, specifications, and quality standards. Using inspection tools and equipment including calipers, micrometers, gauges, and other precision measuring devices. Identifying, documenting, and segregating nonconforming materials. Initiating Nonconforming Material Reports (NCMRs) and communicating issues to Quality, Supply Chain, and Leadership teams. Maintaining accurate and complete inspection records, reports, and logs in accordance with company procedures. Ensuring proper labeling, handling, and storage of inspected materials. Supporting supplier quality improvement initiatives and participating in audits as required. Following company quality procedures, safety policies, and regulatory requirements, including standards such as ISO, AS9100, and Federal Aviation Administration (FAA). Assisting with continuous improvement and corrective action processes. Compensation Range: $22.93 - $27.50/hour The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: High school diploma or equivalent (technical or vocational training preferred). 1+ years of experience in quality inspection or a manufacturing environment. Ability to read and interpret engineering drawings, blueprints, and specifications. Basic knowledge of quality systems and inspection techniques. Proficiency with measuring and inspection tools. Basic computer skills for data entry and reporting. Strong attention to detail. Good organizational and documentation skills. Ability to work independently and follow procedures. Effective communication and teamwork skills. Problem-solving and analytical skills. Desired Qualifications: Experience with ISO 9001/AS9100 or similar quality systems. Experience with incoming inspection or supplier quality. Knowledge of statistical sampling methods (AQL, ANSI/ASQ Z1.4). Certification such as Quality Inspector (CQI) or equivalent. Working Conditions: Manufacturing or warehouse environment. Standing, walking, lifting, and use of inspection equipment. May require use of personal protective equipment (PPE). Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Quality Inspector - 3rd Shift Join a quality‑driven manufacturing and laboratory environment where your attention to detail directly impacts product integrity and customer satisfaction. As a Quality Inspector, you'll play a key role in verifying incoming materials, supporting lab operations, and ensuring compliance with cGMP and QA standards. What You'll Do * Inspect incoming components and lab‑prepared samples to verify compliance with specifications, including appearance, dimensions, and overall integrity. * Perform sampling and submission activities, including pulling samples from multiple pallets, completing submission forms, and making pass/reject decisions based on lab test results. * Document all inspection activities accurately and consistently in alignment with SOPs, QA requirements, and audit expectations. * Maintain compliance within the lab, ensuring proper labeling, cleanliness, and adherence to cGMP protocols. * Assist with investigations related to out‑of‑spec results and support corrective and preventive action (CAPA) efforts. * Collaborate with QC team members to uphold a strong culture of safety, accuracy, and continuous improvement. Top Skills & Experience * Component and material inspection * Quality Control / Quality Assurance * Laboratory environment experience * GMP knowledge and compliance * Strong documentation and organizational skills Additional Qualifications * Ability to work independently while maintaining high attention to detail * Experience with component‑level inspections and lab‑based quality systems * Strong communication skills and a commitment to accuracy and consistency Experience Level * Intermediate level; prior QC or inspection experience preferred This position is moving fast! If interested please send over your updated resume to carendas @actalentservices.com with your availability for a 5 minute phone screen. Job Type & Location This is a Contract to Hire position based out of Wharton, NJ. Pay and Benefits The pay range for this position is $23.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Wharton,NJ. Application Deadline This position is anticipated to close on Jan 20, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.