Quality inspector jobs in Rocky Mount, NC

Job Description Job Title: Quality Associate Department: Global Laboratory Services Reports To: Laboratory Manager FLSA Status: Non-Exempt Job Purpose Statement: Responsible for internal auditing of the ISO 9001 Quality Management System as well as conducting testing with significant attention to detail. Key Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Abide by and enforce company policies, safety procedures and good housekeeping practices Performs quality assurance analysis to ensure consistent and reliable operation in a laboratory setting Performs routine analysis to ensure the integrity of data, processes, and results and provides recommendations to improve quality standards Reviews and interprets test results to ensure accuracy, precision, and repeatability Performs calculations and determinations to validate results or specifications Validates and verifies methods and identifies issues that may affect the accuracy and integrity of test results Performs internal auditing Record keeping as required Perform other duties as required Job Qualification Requirements: Associate Degree in related field preferred, or equivalent combination of education and experience Effective analytical, planning and organizational skills Excellent interpersonal skills Excellent verbal and written communication skills Adapt to frequent changes in climate, environment, workload and schedules, including Saturday and Sunday work when required 30-day competency evaluation period Minimum job criteria level - 3 Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasional lifting of 40 pounds or more Visual attention to assure correct operations Benefits We offer a wide range of market-competitive total rewards that include 401(k) match, merit increases, paid holidays, medical, dental, life, vision, short and long-term disability benefits, and tuition assistance to name a few. EOE M/F/Disabled/Vet Employer All applicants must be authorized to work in the United States.

Job Description Edwards, Inc. is a full-service industrial general contractor providing construction, fabrication, and crane services. We are currently seeking a Day Shift Quality Control Welding Inspector for our Spring Hope, NC, Pipe Fabrication Shop. This position is Monday through Thursday 6am to 6pm. Fridays and Saturdays are possible depending on workload. The QCI Inspector will be responsible for: Reading and interpreting shop fabrication and isometric drawings. Verifying pipe spools dimensions as fit-up to shop fabrication and isometric drawings. Verifying heat number traceability is correct as recorded. Provide a visual weld examination of shop welding. Verify welding filler materials are in compliance and the LOT traceability is recorded. Monitor welding to ensure weld procedure specifications are being followed, correctly. Verify weld preparations, weld sizes, and weld placement in accordance with shop weld details. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements 5 years of experience in industrial piping (preferred but not required) Organizational Skills Able to interpret basic weld symbols as defined by AWS A2.4 Able to read and interpret Codes (i.e. ASME B31.1, B31.3, etc.) Ability to read shop fabrication and isometric drawings. Ability to read dimensional measuring devices. Experience in reading weld procedures and specifications (Preferred) Current AWS Certified Welding Inspector (preferred but not required) Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License (Preferred) High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus but not required. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************ Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.

Job Description Knapheide Installation Center in Raleigh, NC is looking to hire a Quality Technician I to evaluate the overall quality of the completed units produced at the facility. This full-time position works Monday - Thursday from 6:30 AM - 3:30 PM. At Knapheide, you're more than an employee. You're part of a family filled with multi-generation employees who take pride in the work they do. Knapheide has been in business since 1848 and is the premier work truck equipment, accessory, and commercial upfit provider in the United States. BENEFITS & PERKS Paid time off Paid holidays, including Black Friday and Christmas Eve 401(k) with 7% company contribution, once eligible Medical, dental, and vision insurance Employer paid life insurance DAY TO DAY AS A QUALITY TECHNICIAN As a Quality Technician I, you'll inspect units to ensure the final product meets quality standards for form, fit, and function and matches the customer order. You'll work with the production team to ensure repairs are completed in a timely manner in order to maximize customer satisfaction. You'll assist in communicating quality issues throughout the organization in order to prevent further occurrences. To be successful in this role, you'll need to be detail oriented and have a strong mechanical background. OUR IDEAL CANDIDATE Career-minded - looking for more than a job Team player - gets along well with others Organized & attentive to detail - nothing gets by you without being double-checked Efficient - a knack for effectively prioritizing tasks and managing your time REQUIREMENTS High School Diploma or GED Equivalent; Associates or Bachelor's Degree preferred Previous experience working in a Quality role preferred Ability to lift/move up to 75 pounds If you're someone who never settles for second best, takes pride in the work you do, and you're looking for a jump start on a new career, apply today!

Global Channel Management is a technology company that specializes in various types of recruiting and staff augmentation. Our account managers and recruiters have over a decade of experience in various verticals. GCM understands the challenges companies face when it comes to the skills and experience needed to fill the void of the day to day function. Organizations need to reduce training and labor costs but at same requiring the best "talent " for the job. Qualifications Quality Lab Technician needs 4 - 6 years experience in a pharmaceutical environment and knowledge of a wide variety of microbiological techniques (e.g., BET, antibiotic potency, sterility, etc.) and analytical techniques (e.g., UV, etc.). Quality Lab Technician requires: cGMPs and regulatory requirements inside/ outside of the US. Environmental Monitoring LIMS, TrackWise, and Microsoft Office programs Quality Lab Technician duties: data reviewer for the Biological Quality Lab. responsible for cancellation of lots in LIMS and running final product reports. Additional Information $32/hr 9 MONTHS

The Opportunity: A global pharmaceutical company based in Raleigh, NC is seeking a Quality Associate to join their team. This is a long-term temporary role, working Monday through Friday, 40 hours per week. The position follows a hybrid schedule with two days onsite and three days remote. The hourly rate is $45-$50, and benefits are included. Primary Duties: The Quality Associate will support data migration, batch record review, and release activities while building tools to improve operational efficiency. The role involves document management, collaboration with cross-functional teams, and a strong focus on Quality Assurance. Experience with systems like Veeva Vault and Excel is required; knowledge of Power BI is preferred but not mandatory.. The primary duties include but are not limited to: Migrate and manage quality documents in Veeva Vault or similar systems. Transition legacy records while ensuring traceability and compliance. Create and maintain trackers for KPIs, batch status, and release metrics. Review batch records for completeness and compliance. Support release activities and coordinate documentation readiness. Strong organizational, communication, and technical writing skills. Ability to work independently and cross-functionally across QA, MSAT, QC, and Supply teams. Quality- and goal-oriented mindset with a patient-first approach. Requirements Associate degree required; bachelor's in life sciences preferred. 3+ years of QA experience in an FDA-regulated pharmaceutical/biotech environment. Proficiency in batch record review, document control, and Microsoft Office. Familiarity with SAP and Veeva systems. The Partnership - Benefits: ABA-MEC Medical Benefit PEP 401k Paid Time Off Employee Assistance Program (EAP) Working Advantage {discounts) Frink-Hamlett Legal Solutions is an equal employment opportunity employer and all qualified applicants will receive consideration for employment without discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation or citizenship status.

Full-time Description To use various inspection and measuring tools to ensure that parts made by production employees meet the company and customer standards before being shipped to the customer. Starting Pay: $16.50 per hour Schedule: Second Shift, Monday - Thursday, 3:00pm to 1:30am. (4 10 hour shifts per week). Essential Duties and Responsibilities: -You must be able to reasonably commute to the work location. Relocation assistance is not offered for this position. · Audit the production process to ensure products meet standards and have no defects · Sample, sort, test, weigh, measure manufactured components to ensure no defects in products · Help supervisors and leads to decide to run or reject a part or make necessary changes to ensure meeting the part specifications · Notify shift supervisor when defects or other problems are found · Look for ways to improve processes · Assist with training employees on running jobs and ensuring that parts are meeting the part specifications · Work with company personnel to resolve inspection questions · Complete and record daily audit findings from production samples · Comply with all quality, safety and work rules and regulations · Follow all clean up and housekeeping procedures · Other duties may be assigned as necessary Required Knowledge, Skills, and Abilities: · Basic skills in reading, writing and arithmetic are necessary · Ability to follow detailed work instructions · Ability to read blueprints, drawings and schematics · Good manual dexterity is necessary · Good computer understanding · Knowledge of machinery · Understanding of the different types of measuring tools and equipment · Good communication skills Education and Experience: High school diploma, GED or equivalent experience Previous quality experience in a manufacturing industry preferred, Physical Demands: While performing the responsibilities of the job, the employee is required to talk and listen. The employee is required to use their hands and fingers to handle and feel. Vision requirements of this job include close vision, color vision and moderate distance vision. The employee is required to stand most of the shift, occasionally walk around from machine to machine. The employee may occasionally need to lift moderate weights up to 35 lbs. Work Environment: Most of the work performed on the production floor of a manufacturing facility. The work setting of this manufacturing facility provides adequate lighting, noise levels will be moving between moderate to high noise levels. Required Personal Protection Equipment includes Safety Glasses and Hearing Protection for any person in the production area. Additional PPE may be required, i.e. gloves, face masks, face shields, dependent on the specific job being performed and company safety rules and regulations. Because of the nature of this business, the temperature in the production facility can be very hot during the hotter times of the year. Typically, the temperature is more comfortable during the more moderate temperature times of the year. Employees are strongly encouraged to have water at their work area to stay hydrated during their work shift. Requirements Required Knowledge, Skills, and Abilities: · Basic skills in reading, writing and arithmetic are necessary · Ability to follow detailed work instructions · Ability to read blueprints, drawings and schematics · Good manual dexterity is necessary · Good computer understanding · Knowledge of machinery · Understanding of the different types of measuring tools and equipment · Good communication skills Salary Description $16.50/hr starting

Manufacturing Quality Technician - Wilson, NC Be a part of a revolutionary change! At Philip Morris International (PMI), we've chosen to do something incredible. We're totally transforming our business and building our future on one clear purpose - to deliver a smoke-free future. With huge change, comes huge opportunity. So, if you join us, you'll enjoy the freedom to dream up and deliver better, brighter solutions and the space to move your career forward in endlessly different directions. Our success depends on people who are committed to our purpose and have an appetite for progress. Your ‘day to day': As a Manufacturing Quality Technician, you will support manufacturing teams during production and ensure quality management system principles and standards are respected along manufacturing process. Ensure that intermediate and finished product non-conformities are managed and related corrective & preventive actions are taken in timely manner. Support quality improvement initiatives related to quality of the products and systems. Ensure Compliance and Safety Guarantee adherence to PMI and legal standards, policies, and environmental, Health, Safety, and Sustainability guidelines. Foster a proactive, safety-first culture using preventive and predictive approaches in line with our Integrated Operating System. Production Support Support production teams by providing quality guidance and support in case of products, quality instrument and system issues. Share knowledge and expertise to teams on new processes, requirements, methods or guidelines. Train the shop floor team members on quality practices and procedures, and ensure the operational staff remains up to date with PMI quality requirements. Provide first level support for direct material troubleshooting and relevant trials. Support brand change activities to ensure no consumer complaint occurred. Coordinate the availability and testing of samples according to the sampling plan and the control strategy. Perform critical review of executed production batch records and manage intermediate and finished product nonconformities and related corrective and preventive actions held with relevant stakeholders and ultimately confirm to the final approver that the product can be released for commercial manufacturing. Atline Instrument Management Maintain test instruments through calibration, chemical or parts supply, troubleshooting methods, and instrument knowledge. Maintain pertinent records, logs, or reports. Evaluate and verify test methodology and instrument accuracy in assessing quality of finished product. Discuss variances with appropriate personnel and monitor major quality problems and trends. Complete periodic technical product reports and reports on product problems encountered. Monitors, maintains, or develops performance reporting systems developed from the inspection and testing operations and recommends necessary action based upon results. Materials Management Ensure support to manufacturing in order to improve DIMs performance and its impact on product quality, machines efficiency and production costs. Nonconformity Management Support investigation in a timely manner of nonconformities and deviation, leveraging on Integrated Operating Systems' tools. Support investigation and resolution of critical deviations, contribute to define disposal actions and when appropriate corrective actions. Based on recommendation from stakeholders, participate to the decision of releasing or destroying the non-conforming products blocked due to quality issues and monitor the related costs. Support Best Use Before Data(BUBD) processes for Semis and Finished Goods. Documentation Management & Quality Management Systems Support Participate to the creation and review of procedures, work instructions and other quality documents. Provide support and training according to the training management system. Ensure availability of Batch Record before the production in a timely manner. Continuous Improvement Propose and follow-up quality improvement ideas in production or other processes in Operations. Analyze the information and participate in small projects with influence on product quality. Investigate non-conformities, out of specifications/trends in a timely manner. Ensure corrective action preventive actions (CAPA) and quality improvement opportunities are identified, prioritized and action plans determined in order to support the organization through continuous improvement. Who we're looking for: Professional School, Technical or equivalent skills through demonstrated experience 1-2 years of experience in FMCG production, quality or relevant skills through demonstrated experience Knowledge of quality testing instruments, their maintenance and calibration. Advanced knowledge on Quality tools, root cause analysis, analytical skills, statistical tool knowledge. Ability to transform data into information (reporting skills). Knowledge on International standards (ISO). Experience in FDA regulated environment is plus. Fluent in English Legally authorized to work in the U.S. (Required) Relevant Open Sourcing Considerations: Be legally authorized to work in the US International relocation support is not available for this job If you have been in your current job for less than 12 months or if you are on a Performance Improvement Program, you must get the approval of your current manager before applying for the job. If you are not a PMI employee and employed by a third an agency, please make a formal application via the external career site at ******************* To find out more about eligibility to apply for internal jobs, please refer to the Open Sourcing Employee Guidebook on the Internal Careers Portal. We offer employees a competitive hourly salary. Employees (and their families) also have the option to enroll in our company's medical, dental, and vision plans. The company offers flexible spending accounts for health care and dependent care, as well as health savings accounts for those that choose to enroll in a high-deductible health plan (HDHP). Employees are auto-enrolled in our company's 401(k)/Deferred Profit Sharing (DPS) Plan, which provides for both an annual 5% employer matching contribution and an annual employer contribution. As a new hire, you will enjoy an allotment of paid vacation time, paid sick time, paid company holidays. We also provide our employees with paid parental leave for new parents, and short-term and long-term disability insurance, basic life insurance and accidental death & dismemberment (AD&D) insurance at no cost to the employee. Employees have the option to purchase supplemental life and AD&D coverage for themselves, spouse, and dependent children. PMI is an Equal Opportunity Employer. PMI is headquartered in Stamford, Conn., and its U.S. affiliates have more than 2,300 employees. PMI has been an entirely separate company from Altria and Philip Morris USA since 2008. PMI's affiliates first entered the U.S. market following the company's acquisition of Swedish Match in late 2022. Philip Morris International and its U.S. affiliates are working to deliver a smoke-free future. Since 2008, PMI has invested $12.5 billion globally to develop, scientifically substantiate and commercialize innovative smoke-free products for adults who would otherwise continue to smoke with the goal of transitioning legal-age consumers who smoke to better alternatives. In 2022, PMI acquired Swedish Match - a leader in oral nicotine delivery - creating a global smoke-free champion led by the IQOS and ZYN brands. The U.S. Food and Drug Administration has authorized versions of PMI's IQOS electronically heated tobacco devices and Swedish Match's General snus as Modified Risk Tobacco Products and renewal applications for these products are presently pending before the FDA. For more information, please visit ************** and ******************* #PMIUS #LI-JT1

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** Notice: Know Your Rights: Workplace Discrimination is Illegal Notice: Pay Transparency Nondiscrimination (English) Aviso: Transparencia en el Pago No Discriminación (Spanish) : Airbus Aerosystems Kinston is looking for a Quality Inspector to join our team in Kinston, NC. Meet the Team: Our team at Airbus Aerosystems Kinston manufactures crucial aircraft components. On the shop floor you'll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft. Your Working Environment: The Airbus Aerosystems Kinston facility sits at the forefront of aerospace manufacturing, specializing in the production of large, advanced composite aerostructures. Our team builds critical components for the state-of-the-art Airbus A350 XWB, including the composite center fuselage and wing spar. How We Care for You: Financial Rewards: Competitive pay, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”) Work/Life Balance: Paid time off including personal time, holidays and a paid parental leave program. Health & Welfare: Comprehensive insurance coverage including medical, prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages. Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path; as well as the opportunity to participate in accelerated development programmes; and both national and international mobility. Your Challenges: Uses predetermined methods, operations, setups, and prescribed specifications to visually inspect in-process and completed products, such as electronic units and subsystems, precision electromechanical/mechanical assemblies, and subassemblies, for structural flaws, internal defects, and missing welds. Utilizes various measuring devices. Accepts or rejects defective or malfunctioning units or systems. Works from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions, and checklists. May monitor and verify quality in accordance with statistical process or other control procedures. Performs line clearances after each lot to ensure all materials from the previous lot have been removed. The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following: Working from drawings/CATIA, documents, process specifications, quality control requirements, software programs, and test procedures, perform any inspection of parts and assemblies including processes and materials. Dimensionally inspect parts or assemblies. Initiate and document any non-conforming materials, hardware, software, tools, parts, assemblies or portions thereof, according to specifications, processes and procedures. Inspect vendor, subcontractor or company parts and assemblies. Follows a pre-determined sequence of own work. Prepare and maintain Quality records. Support the continuous flow of product within the manufacturing process by cross training and assisting other employees including cross-training in the Assembly Technician function or functions supported. In addition, each employee may be asked, on occasion, to complete other duties and responsibilities as required by leadership. Training and certification will be provided for the additional work when required. Your Boarding Pass: Must be willing and able to work any shift. Must be willing and able to work overtime. All Candidates must pass The WorkKeys Assessment (***************** or provide verification that they have passed The WorkKeys Assessment. Delay in completing your WorkKeys Assessment will result in a delay in your start date. You may complete your assessment in advance of an interview. Physical Requirements: ⦁ Onsite ⦁ Vision: Daily able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings. ⦁ Hearing: Daily able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on production floor including safety warnings or alarms. ⦁ Speaking: Daily able to speak in conversations and meetings, deliver information and participate in communications. ⦁ Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): Daily able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. ⦁ Carrying: Several times a week able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs. ⦁ Lifting: Several times a week able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. ⦁ Pushing / Pulling: Several times a week able to push and pull small office furniture and some equipment and tools. ⦁ Sitting: Daily able to sit for long periods of time in meetings, working on computer. ⦁ Squatting / Kneeling: Several times a month able to squat or kneel to retrieve or replace items stored on low shelving. ⦁ Standing: Daily able to stand for discussions in offices or on production floor. ⦁ Walking (include routine walking such as to a shared printer to retrieve documents) and able to walk through office and production areas including uneven surfaces. ⦁ Personal Protective Equipment required: Required PPE includes, but is not limited to Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks. Protective Gloves. ⦁ Walking: able to walk through office and production areas, around flightline and airstrips and sometimes on uneven indoor and/or outdoor surfaces. ⦁ Heights: able to function at heights up to 40 feet. Able to operate moving platforms, hydraulic lifts and forklifts. Take your career to a new level and apply online now! A full job description will be provided to candidates who progress to the interview stage or any candidate upon request. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Aerosystems Kinston, Inc Employment Type: US - Direct Hire Experience Level: Professional Remote Type: On-site Job Family: Quality Inspection ------ Job Posting End Date: 12.30.2025 ------ Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

Aircraft Inspector: To ensure that MAC aircraft are maintained to the highest standard possible, while enforcing all procedures and policies established by MAC and Current Federal Aviation Regulations. RESPONSIBILITIES/DUTIES: Promotes safety throughout the organization as mandated through Company policies identified by executive management. Ensures the adherence to the designated programs outlined in this manual. Demonstrates on a daily basis a commitment to the continuous improvement of safety throughout the organization. Ensures compliance with safety policies and procedures found in Company manuals. Ensure a safe and healthy workplace for employees in the Maintenance Department. Ensure employees comply with Company safety policies and procedures. Make decisions regarding safety risk acceptance involving Airworthiness release process. Ensure Company aircraft are properly certified and maintained in accordance with Company policies and procedures. Reviews routine and non-routine work cards for accuracy and completion. Certifies the aircraft airworthiness (with regard to the work performed) after an inspection by signing the airworthiness release in the AFML. Records discrepancies detected on appropriate work sheets. Evaluate and submit changes in the inspection and maintenance procedures. Aid the DQ/CI in ensuring that Company aircraft are in compliance with all applicable Airworthiness Directives (AD). Make decisions regarding safety risk acceptance involving the Process Specifications management process. Ensures the quality for the airworthiness release / logbook entry process. Assists in the oversight of the MAC Tool Calibration Program. Assists in the oversight of the MAC Shelf Life Program. Ensures contractors that perform work on MAC aircraft or appliances are in compliance with applicable CFR and Company policies and procedures. Prepares and submits FAA Form 337 and / or EO s for the accomplishment of a major repair or alteration to MAC aircraft or components, as required. Accomplishes the corrective actions for the Quality Control Department requested by the CRB. Update Weight and Balance Report (WBM-QC-005) after each weighing event or recalculation Assist Tech Services with troubleshooting of aircraft In addition to routine inspection duties, an inspector may be required to perform receiving inspections of materials and/or equipment for use on MAC aircraft. Other duties as assigned by the Lead Inspector. QUALIFICATIONS: Must hold a current A&P license Must meet the requirements of 14 CFR 65.83 Three (3) years experience on aircraft with 10 or more seats or same class aircraft Must have a good command of the English language, both written and verbal SPECIAL POSITION REQUIREMENTS: Airworthiness Release Authorization RII Receiving Inspection Engine Run and Taxi Borescope Inspections (based on need) SUPERVISORY RESPONSIBILITY: Responsible for the maintenance performed by Class III ACMP, to include providing all maintenance documentation and applicable maintenance references. TRAINING REQUIREMENTS: ATR Fam Course PWC 100 Series Maintenance Course Hamilton Sundstrand 14SF and 247F Propeller Maintenance Course ATR Engine Run and Taxi Course MAC Basic Electricity Course EWIS Course CPCP Course WORKING CONDITIONS AND PHYSICAL EFFORT: Work typically performed in an office environment. However, due to work requirements, may require frequent travel which will involve exposure to noise, chemicals, adverse temperatures and other similar hazards. Mountain Air Cargo, Inc. is an Equal Opportunity Employer. We offer a comprehensive benefits package.

Job Title: Quality/Validation Engineer III / Laboratory Instrument Validation Duration: 09 months contract, extendable up to 18 months Note: Client has the right-to-hire you as a permanent employee at any time during or after the end of contract. You may participate in the company group medical insurance plan which includes dental and vision. : The Quality Engineer III - Instrument Validation will be responsible for: Serving as validation representative for instruments Partnering with the laboratories, quality system administrators, BT, instrumentation and quality on implementing new instruments at the site Performing analytical instrument validation including computerized system validation if applicable Performing any validation change control during the life-cycle of the system Performing system periodic review Performing system decommissioning This position will be responsible for providing end-user support for all Quality Laboratory groups as well as compliance to global and site internal policies and procedures. ROLE RESPONSIBILITIES Initiates and leads change control for implementation of new instruments or changes to existing analytical instrumentation and associated instrument control software where applicable in Quality Control laboratories. Authors cGMP risk assessments, user requirements & functional specifications, validation plans, protocols (i.e. IQ, OQ, PQ), reports, addendums and other validation deliverables as required by the site validation SOPs. Assist the system owner with evaluating recommending the appropriate user roles and privileges for data integrity (where applicable), writing instrument operation instructions and preventive maintenance plans. Ensures lab instrument's adherence to national and international regulatory guidelines on Electronic Records and Electronic Signatures and Data Integrity, cGMP, FDA 21 CFR Part 11/210/211, EU Annex 11, MHRA guidelines. Authors protocol to challenge the main aspects of these requirements during validation to demonstrate adherence. For systems found unable to fully comply, formulate workarounds/strategies with core stake holders to mitigate the gaps. Initiates and leads risk assessment, gap analysis, and deviation management associated with validation of lab instruments. Completes periodic reviews of instruments and instrument control software with focus on change control, deviation investigations, and CAPA to ensure compliance and validated state of the instrument. Previous experience with PR/CAPA systems preferred. Reviews validation deliverables created by others for adherence to site validation SOPs and acts as validation approver as needed. All other duties as assigned. QUALIFICATIONS Bachelor's degree in a science or engineering related discipline with knowledge in quality operations laboratory processes. 5-7 years of experience in the validation of laboratory instruments including those with computerized systems attached in a cGMP environment (required). 5-7 years of experience in the Pharmaceutical industry or relevant business experience within Quality Assurance or Validation cGMP Compliance. Hands on experience operating instrument systems. Demonstrated attention to detail. Good oral and legible written communication skills. Must be able to work independently. Mastery of core computer software/systems (Word, Excel, Sharepoint, etc.). Demonstrated ability to work in a team environment and manage workload to meet deadlines. Ability to follow a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL/MENTAL REQUIREMENTS (not all roles will have physical or mental requirements) Use a computer terminal for up to 8 hours per shift, occasionally lift a maximum of 5 pounds per activity 4 times per shift, work around moving equipment, work with biological materials. Occasionally lift a computer system and/or instrument up to 50 pounds. Stand for up to 8 hours, sit for up to 8 hours, walking, climbing stairs, responding to visual warning indicators, respond to audible warning indicators, respond to color or special visual indicators, wear specialized protective. Mathematical and scientific reasoning ability. NON-STANDARD WORK SCHEDULE, TRAVEL OR ENVIRONMENT REQUIREMENTS May be required to work non-standard hours including weekends and holidays to support laboratory processes at the Rocky Mount site. Some gowning may be required to enter laboratory areas. Work safely in laboratory areas where biological and chemical hazards are present. ORGANIZATIONAL RELATIONSHIPS Position interacts with laboratories within the Quality unit and impacts their compliance and continuous improvement. Other functions key to the instrument validation process include Laboratory System Administrators, Calibration and Documentation. Position Comments visible to MSP and Supplier: Other Considerations: 1. The official job description of the candidate is Quality Engineer III - Laboratory Instrument Validation. 2. If the candidate has less than the required 5-7 years of experience in the validation of laboratory instruments, will consider the candidate for Quality Engineer II 3. Please post this position in an area geared for the laboratory. 4. In Appendix B, CANDIDATE SCREENING - RESUME COVERSHEET, it would be helpful if the vendors would include the information for at least the 4 skills identified below in addition to anything else they want to add/highlight. Additional Information Anuj Mehta ************

For nearly 70 years, MasterBrand has been shaping the places where people come together, enriching lives and creating meaningful memories for our customers. That, combined with our stylish products, expansive dealer and retail network, and dedicated associates, has helped make us the number one North American residential cabinet business. Our unique culture of continuous improvement is based on trusting the tools, empowering the team and moving forward, and is kept alive by our more than 14,000 associates across 20-plus manufacturing facilities and offices. Visit ******************* to learn more and join us in building great experiences together! Job Description The Quality Technician will be responsible for ensuring all cabinets and components meet company and customer quality standards throughout the production process. This role will involve inspecting materials, monitoring production lines, performing product testing, and documenting quality findings to maintain compliance with internal specifications and customer requirements. Key Responsibilities * Inspect raw materials, in-process components, and finished cabinets to ensure compliance with quality specifications. * Perform routine measurements and tests using tools such as calipers, tape measures, and other inspection equipment. * Document and communicate quality issues, defects, or non-conformances to production and quality teams. * Work closely with production operators to provide feedback and support corrective actions. * Assist in root cause analysis and continuous improvement efforts for quality-related concerns. * Maintain accurate records of inspections, tests, and quality data in company systems. * Follow established quality control procedures and company safety guidelines. * Participate in internal audits and customer inspections as needed. * Support training efforts for production staff on quality standards and best practices. Qualifications Qualifications * Previous experience in quality control, manufacturing, or woodworking/cabinetry is a plus. * Basic knowledge of manufacturing processes, materials, and inspection techniques. * Ability to read and interpret technical drawings, blueprints, and quality specifications. * Strong attention to detail and problem-solving skills. * Basic computer skills for data entry and reporting. * Ability to work effectively in a team environment and communicate clearly with all levels of staff. Additional Information BENEFITS * Insurance coverage including medical, dental, vision, life insurance, flexible spending accounts, wellness programs, 401K all effective day 1 of employment, plus generous PTO and holidays * Associate appreciation/recognition programs * Scholarship program for children of employees * Other benefits offered are dependent upon plant location, please check with HR for details Equal Employment Opportunity MasterBrand Cabinets LLC is an equal-opportunity employer. MasterBrand Cabinets LLC's policy is not to discriminate against any applicant or employee based on race, color, religion, sex, gender identity or expression, national origin, ancestry, age, disability/handicap status, marital status, military status, sexual orientation, genetic history or information, or any other basis protected by applicable federal, state or local laws. MasterBrand Cabinets LLC also prohibits harassment of applicants or employees based on any of these protected categories. It is also MasterBrand Cabinets LLC's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Reasonable Accommodations MasterBrand Cabinets LLC is committed to working with and providing reasonable accommodations to individuals with disabilities. If you have a disability and wish to discuss potential accommodations related to applying for employment, please contact us at ************************.

We have an immediate opening for a high level quality technician to work in the electronics work group in its Wilson, NC facility. This position is from 12pm - 8:30pm. Duties will include: -Troubleshooting circuit boards to component level. -Working knowledge of electronic test and measurement equipment. -Familiar with operating automated test equipment. -Read, comprehend and follow technical document, router & work instructions, blue prints, production drawings, schematics and sample assemblies. -Able to receive verbal instructions regarding duties to be performed. -Work in a lab / manufacturing environment. -On occasion, this position will work overtime and extended hours. -Due to test equipment constraints most likely split shift & off-shifts is required. This may mean working odd shifts and also weekends. -Provide data analysis to identify trends, assist in defect and turn back investigations, provide overall QA support. -Support Quality Clinic activities repair, review and disposition -Utilize Relentless Root Cause Analysis (RRCA) methodologies to resolve escapes and obtain corrective action for non-conformances. -Participate in Continuous Improvement Team (CIT) and SRR programs. -Preparation of Failure Analysis reports of troubleshooting returned parts. -Provide expertise in Quality Assurance and process improvement tools and methods to targeted functions of the organization to support them in their continuous improvement activities. -Maintain accurate records of assembly work and inspections performed. *Education / Certifications High School Diploma or GED is required for this position with 3 years minimum experience in the repair, maintenance and operation of aerospace electronic equipment and/or working in an Engineering Lab environment on electronic equipment. *Experience / Qualifications Three to five (3) years minimum experience in the repair, maintenance and operation of aerospace electronic equipment and/or working in an Engineering Lab environment on electronic equipment is required. Candidate must be able to complete and get certified in IPC-610 or J-Standard Solder Certified within 90 days of starting. Basic experience with MS Office. - Fine Pitch soldering experience desired. - Familiarity with National Instruments PXI Chassis or similar modular test equipment systems a plus - This position requires mechanical ability, manual dexterity and hand-eye coordination to build various assemblies using drawings and instructions. - Candidate must be able to use various types of hand tools. This position will most likely work 12pm - 8:30pm. SKILLS AND CERTIFICATIONS 3 years of maintenance, quality or repair experience in aerospace electronic equipment or eng lab J Standard certified in the past Ability to get J Standard Solder Certified within 90 days of hire Ability to work 12pm - 8:30pm. IDEAL CANDIDATE This person has experience with troubleshooting and repairing circuit boards so that they can work in the quality function to support the organization. They will have worked with test equipment in the past and have a desire to solve manufacturing problems and help them reach root cause. This person could ideally teach the J Standard soldering course in the future as well for our site. IDEAL CANDIDATE SHOULD HAVE WORKED FOR THE FOLLOWING COMPANY(IES): Anywhere that electronic circuit boards are made or repaired. Additional Information All your information will be kept confidential according to EEO guidelines. Direct Staffing Inc

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Eaton's EPG CHD EP Americas division is currently seeking a Quality Inspector. The core hours are 7:00am to 3:30pm. The hourly rate for this position is 21.20 per hour. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: This position assists in the calibration of gages and equipment, inspects in-process, incoming, & out-going materials, works to execute departmental work, trains new inspectors, and handles routine clerical duties and required documentation. A Quality Inspector is responsible for reviewing products and materials during manufacturing to make sure they meet company requirements. Their duties include measuring objects compared to their intended physical specifications, running quality tests, and identifying defects. Inspect and test electrical products and components to engineering drawings and specifications using inspection procedures and sampling plans as specified. Performs in-process, receiving, and final inspections. Performs complete physical inspection of components, assemblies, and packaged units. Utilize various measuring equipment such as calipers, micrometers, vision system and CMM Record inspection data for historical records, as needed. Quarantine non-conforming material and create non-conforming material tag. Accurately fills out all necessary paperwork such as serial number logs and special products data sheets. Familiar with COC sheets with shipments. Utilize functional knowledge and familiar with Special Government products and related testing and documentation requirements. Perform Internal Audits, as needed. Assists in seeing that gages are calibrated within the required frequency. Utilize knowledge of ISO procedures, work instructions, and document control (especially engineering drawings) Does FAIs (First Article Inspections) Helps schedule work through Quality Inspection areas Helps with training of Quality employees (and others, if needed) Helps keep work area clean. Other duties as assigned by supervisor or Quality Technician. Qualifications: Basic (Required) Qualifications: Must have a high school diploma or GED from an accredited institution. A minimum of one (1) year of quality experience in a manufacturing setting. Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc. No relocation benefit is offered for this position. Only candidates residing within the immediate area of LaGrange, NC (50 miles) will be considered for this position. Preferred Qualifications: Accurate interpretation of blueprint information for inspection purposes. Strong computers skills. (Windows, Microsoft Office, SAP, and Calibration Database) Position Criteria: Ability to read and interpret mechanical & electrical drawings, and government specifications. Excellent math skills, conversions from English to metric and decimals to fractions on part specifications. Knowledge of basic electrical principles. Use of computer software to enter receipts, first article inspection and NCMA's.

Are you looking for a Company you can "GROW" with, Look no farther, CMC Hotels can provide this opportunity to you. We believe in Growing People. Our people are the Heart of our organization. The growth and success of our portfolio will be possible by the contribution of our associates who will be recognized, grow and succeed with us. We offer our associates an array of benefits, based on eligibility, including: * Competitive wages based on experience * Paid Vacation * Holiday Pay * Medical, Dental, Vision Insurance * Sick Leave * 401k * Hotel Discounts RESPONSIBILITIES: * Follow 15/5 rule, make eye contact and smile at 15 feet, greet guest within 5 feet, to ensure complete guest satisfaction. * Must wear approved uniform at all times while working, including nametag. * Responsible for assisting in cleaning rooms or public areas and performing laundry functions as workload may require. * Responsible for establishing and implementing proper standards and procedures for housekeeping staff ensuring brand and corporate standards. * Enforces established policies and procedures for CMC and the hotels brand. * Responsible for training all housekeeping and laundry staff according to expectations and standards. * Communicates daily with other management, and department heads and employees to ensure proper operating procedures are in compliance. * Responsible for conducting daily inspections of all areas cleaned by the Housekeeping Department including the guest rooms and public areas. Record all relevant information on the Housekeeping Inspection Report. * Responsible for installing inventory controls for uniforms, linens and/or supplies to be monitored by issuance procedures and purchasing. * Responsible for inventories of guest supplies and amenities including equipment on an ongoing basis. * Responsible for monitoring and controlling the budget. * Responsible for key control as noted in the housekeeping manual. * Responsible for managing, monitoring and making adjustments to comply with energy conservation program management. * Responsible for ensuring proper maintenance in regard to building, furniture, fixture, and equipment. * Responsible for evaluating condition of furniture, fixtures, décor and make recommendations and assist in the coordination of rehab projects. * Ensures Security for the hotels customers, employees, and property assets. * Responsible for updating all safety procedures. * Responsible for compliance with fire and safety issues. * Responsible for following and implementing the DND policy to fellow associates, reference Life Safety handbook if necessary. * Responsible for reporting maintenance issues, using the corporate approved tickets, and making sure room is noted as out of order until repair can be made. * Responsible assisting Executive Housekeeper in conducting room attendant training to improve weak areas reflected in the individuals performance evaluations. * Responsible for assisting the Executive Housekeeper in completing room assignments for the Room Attendants from the Housekeeping Report. * Responsible for serving as the Executive Housekeeper in their absence for days off, sick, vacation or other. * Execute any other tasks or duties deemed necessary by hotel management for the successful operation of the property.

Job DescriptionDescription: Purpose: Inspector position will concentrate on Cut & Grind, Patch, Final Assembly, and Packaging departments. Area of assignment and cross-training may vary at the discretion of the Director of Quality. Qualifications: Familiar with standard concepts, practices, and procedures within a production boat factory. Must be decisive, and willing to support his/her conclusions under often contentious exchanges. Ability to focus on minute details. Takes pride in producing the highest quality product. Able to adapt to changing priorities and schedule. Works under moderate supervision. Moderate lifting ability up to 50 lbs. High school diploma required. Associates or Technical Degree preferred. Strong organization skills, detail oriented, and computer skills required. Positive, high-energy, self-confident personality. Primary responsibilities: Performs quality control inspections, checks and tests. Inspects materials, parts and products at various production stages. Records defects and observations for process improvement recommendations. Inspects rework of defects and clears boat for release to the next department. Performs final systems and cosmetic inspections before a boat is released for shipment. Support a positive safety first culture in daily activities Benefits: Competitive pay First shift Medical Dental Vision 401k Paid time off & Holiday pay Apply today to schedule an interview! Requirements:

Why Us? We want the best and brightest people to help us achieve our mission to develop and deliver life-enhancing products through focused execution. Our nearly 3,000 global team members understand the important role we play in delivering healthcare and are dedicated to supporting each other as we work to bring the best treatments forward. Our shared values of Integrity & Quality, Innovation, Drive, Collaboration and Empathy guide our team and enable us to deliver upon our vision of helping everyone we serve live their best life. Summary The Quality Tech II analyzes process samples as received and performs non-routine analysis as requested. She/he will analyze finished goods and raw materials by chemical, physical, and instrumental means to ensure quality as needed. She/he will typically work on a rotating shift schedule. Job Description ESSENTIAL FUNCTIONS: Performs in process testing for internal customers. Performs finished goods, returned goods, and stability testing for external customers as needed. Performs specified analysis on all process controls samples and reports in a timely manner by telephone or computer entry using approved written procedures and proper laboratory techniques. Performs specified analysis on all finished goods using approved written procedures and proper laboratory techniques as needed. Maintains accurate and precise records of all laboratory analysis using appropriate Mallinckrodt recordkeeping system. Troubleshoots and performs routine maintenance on laboratory instrumentation. Prepares all standards and reagents needed for proper execution of analytical methods and procedures. Prioritizes and plans workload to meet all internal and external customer needs for maximum efficiency and accuracy. DEPARTMENT SPECIFIC/NON-ESSENTIAL FUNCTIONS: Assists in any non-routine analytical work needed to solve plant problems. Works on solving problems and implementing improvements in a teaming environment. Uses problem solving skills to help with failure investigations and testing problems. Aids in performing any non-routine quality control related tasks such as resampling, raw material testing, and performing analysis needed to validate methods and equipment. Participates in a certified 5S Workplace System to ensure good housekeeping and organization. Assists with training others as needed. Other duties as assigned with or without accommodation. MINIMUM REQUIREMENTS: Education: Associates of Science (AS) or Bachelor of Science (BS) or equivalent life science degree preferred. Appropriate experience may be a suitable replacement for degree. Experience: 1 - 3 years laboratory experience in a pharmaceutical manufacturing operation preferred. Working knowledge of cGMP is a plus. Expected Skills/Qualifications: Other Skills/Competencies: Must be able to perform basic mathematical calculations. Familiarity with basic laboratory procedures, equipment, and computer key punching. Sound and correct technical judgments are required during routine analysis. High degree of concentration is required. Ability to differentiate colors, as demonstrated by passing a test designed to identify color blindness (such as the Ishihara test). If testing criteria are not met with uncorrected vision, the use of color correcting glasses may be used as long as testing criteria are met while using them. Functional/Technical Skills, Priority Setting, Written Communication Customer Focus, Organizing RELATIONSHIP WITH OTHERS/ SCOPE: Laboratory technicians are responsible for communicating any uncompleted work to the next shift, as well as any immediate priorities. Majority of work is performed independently without direct supervision. Non-routine results, observations, or analytical requests are brought to the attention of the appropriate management personnel. Reports to Quality Testing and Release Manager. Frequent interact with operators, engineers, and Quality management for reporting routine analytical results. Communication may be though radio, telephone, email, or in person. Incorrect or inaccurate analyses can result in possible shipment of reject drug items to Mallinckrodt customers. Customer-requested specifications and Mallinckrodt methods of analysis are considered confidential for marketing purposes. Ability to understand the timely nature of work, quick reporting of results, and fast changing of priorities are necessary to complete assigned tasks. Laboratory employees must be able to work effectively under these conditions. Completes all required Compliance trainings in a timely manner. WORKING CONDITIONS: Most work is performed in a well-equipped analytical laboratory complete with fume hoods, laboratory benches, analytical glassware, and instruments. Boxes of solvents, compressed gas cylinders, old records, and reserve samples are stored in areas outside the laboratory and may require lifting and transporting to the laboratory area. Exposure to fugitive emissions of chemicals typical for chemical operations. Normal dexterity is required for routine handling of laboratory glassware and instruments. Colors must be well-visualized and slight differences in volumes of liquids in appropriate glassware distinguished. Must be able to wear the required personal protective equipment (PPE), such as hard-hat, steel-toe shoes, safety glasses, and other equipment as deemed necessary by EH&S, leadership team, corporate, or safety guidelines for the position. Must be able to work a rotating12 hour shift schedule of (7pm-7am / 7am-7pm) in addition to occasional overtime as needed. DISCLAIMER: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of employees assigned to this position. EEO Statement: We comply with all applicable federal, state, and local laws prohibiting discrimination and harassment, and provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or genetic information, or any other classification protected by federal, state or local law. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionBenefits: 401(k) 401(k) matching Company car Dental insurance Health insurance Opportunity for advancement Paid time off Benefits/Perks Flexible Schedule Competitive Pay Career Advancement Opportunities Job Summary We are seeking a HVAC Quality Control to join our team. In this role, you will monitor the quality of incoming and outgoing materials and ensure they meet our high-quality standards. You will inspect randomly selected samples, use our proven methods to inspect them, and approve or reject them based on their quality. The ideal candidate has an eye for detail and is committed to our high standards of quality. Responsibilities Review blueprints and written instructions to understand quality requirements for each product Select random samples and test using our standard methods Approve or reject samples based on quality standards and inspections Use necessary tools in the course of testing products Maintain accurate and detailed records of testing outcomes Ensure compliance with health and safety standards at all times Qualifications Previous experience as a Quality Inspector or in a similar role is preferred Understanding of quality control standards and testing methods Attention to detail Familiarity with Microsoft Office and other software applications Excellent verbal and written communication skills

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Quality Supervisor At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Quality Inspection Supervisor This position is classified under Global Grade: Grade 16 Your role and responsibilities In this role, you will play a key part in driving continuous improvement within the Quality testing operation. Responsibilities include training and evaluating new testers, as well as developing and refining detailed work instructions to ensure consistency and accuracy in testing procedures. The work model for the role is: Onsite at Pinetops, NC You will be mainly accountable for: Develop and maintain comprehensive testing work instructions for all product lines. Train testers on proper test methods and procedures - training will include occasional off-shift coverage. Evaluate testing competency of individuals Effectively use Microsoft Office applications including Word, Excel, PowerPoint, and Outlook for documentation and reporting. Work independently with minimal supervision, managing multiple priorities and tasks efficiently. Communicate clearly and professionally in English, both verbally and in writing. Qualifications High school diploma or equivalent required. Minimum of 6 years of manufacturing experience, preferably in a testing or quality assurance role. General understanding of electrical principles and testing methodologies. Proficient in Microsoft Office Suite. Excellent organizational, communication, and problem-solving skills. Ability to work independently (self-motivated and self-directed) and successful at managing multiple priorities Requires occasional lifting of up to 50 pounds, frequent squatting, bending, stooping, sitting and stretching, standing and walking for extended periods of time. Requires full range of motion including handling and lifting, manual and finger dexterity, and hand-eye coordination Candidates must already have a work authorization that would permit them to work for ABB in the US. What's in it for you ABB's Distribution Solutions Division facilitates the efficient and reliable distribution, protection and control of power by improving electric power quality while strengthening the resilience of the grid. The Division offers segment-specific products and solutions that largely serve utilities, industry and infrastructure segments, often providing the requisite medium voltage link between high-voltage transmission systems and low-voltage users. With ABB Ability™ enabled connected solutions at its core, the offering includes medium-voltage air- and gas-insulated switchgear (1 to 66 kilovolts), indoor and outdoor circuit breakers, reclosers, fuses, contactors, relays, instrument transformers, sensors, motor control centers, as well as low-voltage switchgear for the ANSI standard markets. We want you to bring your full self to work-your ideas, your energy, your ambition. You'll have the tools and freedom to grow your skills, shape your path, and take on challenges that matter. Here, your work creates impact you can see and feel, every day. ABB is an Equal Employment Opportunity and Affirmative Action employer for protected Veterans and Individuals with Disabilities at ABB. All qualified applicants will receive consideration for employment without regard to their- sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ******************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer for Protected Veterans and Individuals with Disabilities, applicants may request to review the plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at **************. Protected Veterans and Individuals with Disabilities may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at ************** or by sending an email to ****************. Resumes and applications will not be accepted in this manner. #LI-Onsite MyBenefitsABB.com #ABBCareers #RunwithABB #Runwhatrunstheworld Ready for your next career move? We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe.

Job Description Edwards, Inc. is a full-service industrial general contractor providing construction, fabrication, and crane services. We are currently seeking a Night Shift Quality Control Inspector for our Spring Hope, NC, Pipe Fabrication Shop. This position is Monday through Thursday 6pm to 6am. Fridays and Saturdays are possible depending on workload. The QCI Inspector will be responsible for: Reading and interpreting shop fabrication and isometric drawings. Verifying pipe spools dimensions as fit-up to shop fabrication and isometric drawings. Verifying heat number traceability is correct as recorded. Provide a visual weld examination of shop welding. Verify welding filler materials are in compliance and the LOT traceability is recorded. Monitor welding to ensure weld procedure specifications are being followed, correctly. Verify weld preparations, weld sizes, and weld placement in accordance with shop weld details. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements 5 years of experience in industrial piping (preferred but not required) Organizational Skills Able to interpret basic weld symbols as defined by AWS A2.4 Able to read and interpret Codes (i.e. ASME B31.1, B31.3, etc.) Ability to read shop fabrication and isometric drawings. Ability to read dimensional measuring devices. Experience in reading weld procedures and specifications (Preferred) Current AWS Certified Welding Inspector (preferred but not required) Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License (Preferred) High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus but not required. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************ Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.