Quality inspector jobs in San Rafael, CA - 147 jobs

The Quality Inspector performs quality inspections and ensures quality problem resolution for product manufacturing and packaging according to procedures, specifications and standards. This position also assists the Quality department with administrative aspects of quality maintenance and remediation. This is a 3 rd shift position, with working hours from 11:00pm - 7:30am, Monday through Friday. ESSENTIAL FUNCTIONS In-process quality checks - perform visual and physical verification of production logs, data and components; assist with documentation and segregation of nonconforming components; collect/document samples and deliver to QC In-process quality checks - perform visual and physical verification of data, products and procedures throughout packaging, labeling, etc. Alert production staff to stop production if quality problems are identified Problem solves with production staff to achieve prompt resolution of identified quality issues Equipment set up verifications - Verify information, paperwork, logs, blends and components are correct against work orders and properly staged and that samples are available at each machine prior to production Equipment changeover verifications - Verify that previous product is fully cleared from processing equipment and downstream production and that new product information is correctly entered GMP facility walks - Identify and correct GMP violations or inconsistencies in quality procedures Verify that documentation is complete for the production run after changeovers Batch Production Run review - perform final verification of hard copy and electronic BPR data Assist with investigative tasks in the Quality Department Assist in deviation report generation or development and implementation of corrective action plans Assist with report writing, compiling and reporting results, SOP revisions and work instructions Provide administrative support to the department Assist with accurate data collection and metrics reporting (Nonconforming material, First Run Quality and Quality Audits) Other duties as assigned SUPERVISORY/BUDGET N/A REQUIREMENTS Education/Experience: High school graduate or equivalent 1-2 years QA/QC experience in food, wine, pharma, or dietary supplements manufacturing facility preferred Previous 3 rd shift/graveyard experience strongly preferred Knowledge/Abilities/Skills: Intermediate mathematics skills including percentages Conversant with units of measure such as grams or pounds Able to solve problems and make decisions based on company and/or quality policy Ability to read, interpret and apply quality standards, SOP's, specifications and work instructions Strong analytical and problem solving skills Strong organization and detailed work Strong verbal and written communication skills Strong interpersonal skills Commitment to and ability to demonstrate TM's Company values: Find good intentions, Stay curious, Be real and open, Create together, Make a meaningful difference, Keep raising the bar Bilingual (English/Spanish) preferred Technical Skills: Intermediate MS Office skills Production Management Software (RedZone preferred), System Integration Software (Ignition) eQMS software (MasterControl) Measurement tools and software including force gauge, calipers, balances, vacuum chambers Travel Requirements: N/A Work Environment: Fast paced production environment working across all areas of production including finished product, blending, case packing, warehouse maintenance and quality control Simultaneous support for up to eight manufacturing lines along with all the ancillary equipment, tasks and processes Office Hours/Location: This position is based in Sebastopol, CA. Shift hours are from 11:00pm-7:30am, Monday through Friday, with occasional Saturday work. Remote candidates will not be considered for this role. Traditional Medicinals, Inc. and its subsidiaries are proud equal-opportunity employers. We wholeheartedly embrace authenticity, diversity, and people's differences. We acknowledge, celebrate, and support individuality to the great advantage of our consumers, our stakeholders, our products, and the planet. We are committed to building an inclusive workplace for all our people. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Compensation range is $24.62 - $32.31 per hour, plus 15% shift differential. Compensation is determined based on non-discriminatory, business-related factors, including but not limited to, training, experience, education and/or professional certifications, geographic location, and market data.

We offer market competitive compensation. Potential salary range for this role is $23.00-$27.00 Per Hour. Actual pay will be determined based on experience, qualifications, geographic location, and other job-related factors permitted by law MAIN PURPOSE OF JOB: This position is responsible for in-process and final visual inspection of parts. This position is on the production floor collecting samples and performing visual inspections. This is a highly responsible position requiring attention to detail and the ability to work with minimal amounts of supervision. This position requires the use and understanding of special quality inspection tools and equipment. MAIN JOB RESPONSIBILITIES: Collects samples at scheduled intervals from each machine. Perform the necessary visual Quality/SPC testing procedures on samples. Utilize tools, gauges and other inspection equipment to obtain product specification data. Accurately record information consistent with the department format. Communicate with Machine Technicians, Operators and Production Supervisors to run a consistent quality product. Follow all departmental procedures with respect to routine daily assignments. All workstation areas will be maintained in a neat and orderly manner. Inspect and document in-bound raw materials for conformance. Place non-conforming products on hold and create non-conforming records. Conduct quality inspection on rework product. Work on validation projects as needed. Manage production and validation projects. Update Quality Inspection requirements. Create Job Packets and manage device history records. Participate in Material Review Board activities. POSITION QUALIFICATIONS: Education: High School Diploma or GED (preferred) Ability to read and write in English. Experience with ANSI Sampling Plans Knowledge of measurement instrumentation (Caliper, Micrometer, Ruler, Gage Blocks, etc.) Experience with ISO 13485 processes Ability to read prints. Knowledge of Microsoft Word and Excel.

We are seeking a Server product system level inspection and testing in San Jose to join our production team by working efficiently in a fast paced environment and help with system level testing and troubleshooting. Essential Duties and Responsibilities: Includes the following essential duties and responsibilities (other duties may also be assigned): • Assist Server system level inspection & quality report related paperwork. • Assist server system level incoming quality control • Assist Server system level testing & troubleshooting • Perform other production quality related duties as directed by supervisor Qualifications: • High school diploma required • At least 1 years in the field of QC/QA function is preferred • Language Skills: English is required; Mandarin is a plus • Be able to comply with overtime requirements • Excellent troubleshooting skills • Actively promotes production, quality and safety standards • Motivated individual with the willingness to be a good team player Pay: $22-$24 #EmploynetJobsFremont

GENERAL INFORMATION Quality Inspector (II, III, or Senior) Department: Quality Assurance Reports to: Quality Engineering Purpose of the Job This Quality Inspector position will report to Quality Engineering. Main responsibilities include performing incoming inspections of materials/parts/products and reviewing and approval of manufacturing batch records and inspection records. This position will require to perform disposition of materials/parts/products. As a Quality Inspector, you will also support Quality Engineering with other Quality Management System (QMS) activities, such as assisting with environmental monitoring and quality metrics. Major Duties and Responsibilities Interpret drawings and specification documents. Perform incoming inspection of materials/components/subassemblies/finished products following standard operating procedures and using standard inspection tools, including the MicroVu and Keyence. Determine inspection sample size based on procedures, specifications, and standards. Help develop inspection methods, including automated inspection programs using the MicroVu and Keyence. Review/approve executed batch records for manufacturing and inspection records in accordance to QMS procedures and Good Documentation Practices. Approve/perform final disposition of materials/components/subassemblies/finished products. Assign and apply expiration dating labels to materials/parts/products, as per specifications/quality procedures. Initiate Non-Conformance Material Reports (NCMRs) and deviations when discrepancies are observed during inspections and record review process. Report discrepancies and issues to QA Engineering and affected function(s). Maintain materials in Quarantine (pending disposition) and MRB (under NCMR and deviations) in order. Maintain accurate records as per Document Control procedures. Support training of IQC personnel. Assist with performing environmental monitoring of Controlled Environment Rooms (CERs), as needed. Support Quality in the collection of quality metrics data. Interact closely with different functions of the organization. Education and/or Job Experience 2-5 years of experience performing inspections and reviews/approvals of manufacturing batch records/inspection records Government Regulated Environment experience such as FDA and ISO 13485 Must have adequate computer experience (knowledge of Microsoft Word, Excel) Experience working in a cGMP environment Skills and Specifications Attention to detail and organizational skills Good interpersonal and communication skills Ability to work as a part of a team and promote a team environment

Do you want to change the world? Zipline uses drones to deliver critical and lifesaving medicine to thousands of hospitals serving millions of people in multiple countries. Our mission is to provide every human on Earth with instant access to vital medical supplies. Join Zipline and help us make this a reality for billions of people. About the Role As the Quality Inspector Supervisor at Zipline, you will lead our team of inspectors who safeguard the quality of all incoming parts and components that make our aircraft safe and reliable. You will be responsible for training, developing, and managing a team of inspectors, ensuring inspection best practices are upheld, and driving continuous improvements in how we assess hardware quality. You will collaborate closely with the material planning team to align inspection priorities with production needs and with Quality Engineering to support root-cause analysis and corrective actions. This role requires a strong technical background in GD&T and inspection tooling, as well as excellent communication and task management skills to ensure the team's success. This position is ideal for someone who enjoys coaching others, thrives in a fast-moving environment, and takes pride in building inspection processes that scale. What You'll Do Team Leadership & Development * Supervise and develop a team of quality inspectors, upholding best practices and providing training in inspection methods, GD&T interpretation, and use of tooling/fixtures. * Set clear expectations for performance, hold the team accountable to quality standards, and create growth opportunities for individuals. * Foster a culture of ownership, precision, and continuous improvement within the inspection team. Inspection Planning & Prioritization * Partner with the material planning team to determine daily/weekly inspection priorities and allocate resources accordingly. * Balance workloads across the team by understanding work scope, inspection complexity, and inspector capabilities. * Ensure timely inspections that support production schedules without compromising quality. Technical Expertise * Act as the subject-matter expert on GD&T, metrology, and inspection tooling/fixtures. * Review and critique inspection plans, drawings, and fixture designs, providing feedback on feasibility and tolerance stack-ups. * Guide the team in using the right tools for each inspection and identifying tricky or non-obvious issues. Process Improvement & Communication * Develop and refine inspection processes that scale with increased production rates. * Ensure accurate documentation and traceability of inspection results in the quality-management system. * Drive clear communication of inspection results, nonconformances, and priorities across teams. * Collaborate with Quality Engineering to support root-cause investigations and corrective actions. What You'll Bring * 5+ years of hands-on quality inspection experience in manufacturing, aerospace, or related fields, including at least 2 years in a leadership or supervisory role. * Deep technical literacy: proven expertise in GD&T, engineering drawings, schematics, and inspection plans. * Strong knowledge of inspection tooling, fixtures, and metrology methods. * Demonstrated ability to train, mentor, and coach others in inspection best practices. * Experience prioritizing workloads and balancing resources across a team. * Excellent communication and organizational skills; able to clearly assign work, track progress, and communicate status. * Experience collaborating with planning, engineering, and production teams to align quality and schedule goals. * Proficiency with quality documentation software (e.g., 1Factory), task tracking tools (e.g., Jira), and general computer literacy. * Strong attention to detail with a disciplined, process-driven mindset. * Experience inspecting composites (carbon fiber or similar) strongly preferred. Other Requirements * Ability to lift up to 20 lbs and perform hands-on work throughout the day * Comfort working with tools, chemicals, and hardware in a lab/manufacturing environment (including respirator use when required) What Else You Need To Know Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities. We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Quality Technician will report to the Receiving Quality team lead and have the final goal to support the development of business processes to ensure that Ryzen's Client's products and services provide a high level of quality that meets the defined standards and specifications and in the end, the customer expectations. You will be helping in establishing high quality standards and will ensure product quality standards are met through inspection, documentation, and process improvement activities across receiving quality operations. You will support quality management systems by conducting audits, performing root cause analysis, and implementing corrective actions while collaborating with cross-functional teams to maintain high-quality standards in manufacturing and services. In this role you will: Perform part and vehicle level quality inspection to ensure the product is meeting specifications. Process incoming material and validate conformance to established quality standards Document various procedures and work instructions Support creating and reporting metrics to demonstrate quality status in NPI, manufacturing, and services Enter test result data into SAP and JIRA systems Help in Root Cause Analysis activities, Corrective Action implementation and validation Support process improvement activities Work with cross-functional teams as needed Qualifications Bachelor's degree with 6- 8 years of experience in the manufacturing environment (automotive, semiconductor, or aerospace fields are preferred). Experience in performing Quality inspections based on control plan Experience with Root Cause Analysis, Problem Solving and Quality Control methods Must be familiar with Google suites (words, docs, sheets) Strong planning, organizational, analytical, interpersonal, decision-making, oral and written communication skills Bonus Qualifications Electrical component (wire harness) inspection experience Previous experience in SAP and/or JIRA system Industry background and/or experience in; automotive, software, contract manufacturing, customer management Pay Rate: $35.00/HR - $45.00/HR

Quality Inspector The Quality Inspector is responsible for performing detailed inspections and tests on incoming materials, in\-process components, and finished optical assemblies to guarantee compliance with engineering drawings, specifications, and internal quality standards. This role is crucial in upholding our commitment to precision manufacturing and a zero\-defect guarantee. Key Responsibilities: Perform Incoming, In\-Process, and Final Inspections of optical components (lenses, mirrors, prisms, windows) and opto\-mechanical assemblies. Utilize a variety of precision measuring instruments, including micrometers, calipers, height gauges, optical comparators, microscopes, interferometers, and radius benches to verify dimensions, tolerances, and cosmetic specifications. Conduct visual inspection of optics for cosmetic defects such as scratches, digs, bubbles, and coating issues according to established standards (e.g., MIL\-PRF\-13830B or custom customer specifications). Read and accurately interpret complex engineering drawings, specifications, and technical documents, including Geometric Dimensioning and Tolerancing (GD&T). Document inspection results accurately, generate inspection reports, and maintain meticulous records for traceability. Identify and quarantine non\-conforming materials or products, and collaborate with the Manufacturing and Engineering teams to investigate root causes and support Corrective and Preventative Actions (CAPA). Ensure all inspection activities adhere to company Standard Operating Procedures (SOPs) and quality management systems (e.g., ISO 9001). Assist in the calibration and maintenance of inspection tools and equipment to ensure accuracy. Contribute to the continuous improvement of quality processes and manufacturing efficiency. Adhere to all company safety protocols and maintain a clean and organized work environment, which may include a cleanroom environment. Requirements Minimum Qualifications: High School Diploma or equivalent. 2+ years of experience in Quality Inspection within a precision manufacturing environment, preferably in optics, photonics, or a related field. Proven proficiency in using precision measurement tools (calipers, micrometers, optical comparator, microscope). Ability to read and interpret engineering blueprints and apply GD&T principles. Exceptional visual acuity and attention to detail for cosmetic inspection of delicate components. Strong verbal and written communication skills and computer literacy for documentation. Ability to work independently, manage time effectively, and prioritize tasks in a fast\-paced environment. Preferred Qualifications: Associate's degree or technical certification in a related field (e.g., Optics, Manufacturing Technology). Prior experience with optical inspection equipment such as interferometers, autocollimators, or specialized optical test benches. Experience with an Enterprise Resource Planning (ERP) or Quality Management System (QMS) software. Knowledge of the principles of optical glass materials and their properties. Certified Quality Inspector (CQI) certification. Physical Requirements: Ability to sit or stand for extended periods. Manual dexterity and fine motor control for handling small, delicate optical components and using precision instruments. Sufficient visual acuity for magnified inspection under a microscope. Ability to lift and move up to 25 pounds occasionally. Benefits "}}],"is Mobile":true,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"687062720","FontFamily":"PuviRegular","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"City","uitype":1,"value":"Pleasant Hill"},{"field Label":"State\/Province","uitype":1,"value":"California"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"94523"}],"header Name":"Quality Inspector\- Applied Optics","widget Id":"**********00072311","is JobBoard":"false","user Id":"**********02449001","attach Arr":[],"custom Template":"5","is CandidateLoginEnabled":true,"job Id":"**********03224003","FontSize":"15","location":"Pleasant Hill","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"dk1on2d2aef**********9e772831fe0f3140"}

Qualifications: High School Diploma or equivalent; Associate's degree or technical certification in Optics or Manufacturing Technology preferred 2+ years of experience in Quality Inspection within precision manufacturing environment, preferably in optics or photonics Proven proficiency using precision measurement tools (calipers, micrometers, optical comparator, microscope, interferometers, radius benches) Ability to read and interpret engineering blueprints and apply GD&T principles Exceptional visual acuity and attention to detail for cosmetic inspection of delicate optical components Strong verbal and written communication skills and computer literacy for documentation Prior experience with optical inspection equipment (interferometers, autocollimators, specialized optical test benches) Experience with ERP or Quality Management System (QMS) software Knowledge of optical glass materials, properties, and ISO 9001 quality management systems Certified Quality Inspector (CQI) certification preferred Responsibilities: Perform incoming, in-process, and final inspections of optical components (lenses, mirrors, prisms, windows) and opto-mechanical assemblies Conduct visual inspection of optics for cosmetic defects (scratches, digs, bubbles, coating issues) according to established standards (MIL-PRF-13830B or custom specifications) Document inspection results accurately, generate inspection reports, and maintain meticulous records for traceability Identify and quarantine non-conforming materials or products, and collaborate with Manufacturing and Engineering teams to investigate root causes and support CAPA Assist in calibration and maintenance of inspection tools and equipment, and contribute to continuous improvement of quality processes

Job Title: Quality Control Inspector Business Unit: Randtron Schedule: 9/80: Employees work 9 out of every14 days - totaling 80 hours worked - and have every other Friday off. About Fisica Inc. Fisica, Inc. is a premier manufacturer of advanced defense products, specializing in the design and production of airborne and ground-based antennas, as well as cutting-edge electromagnetic systems and simulators. Headquartered in San Leandro, California, with additional operations in Simi Valley, Fisica plays a vital role as a trusted partner to leading defense primes and the U.S. Department of Defense. Our company operates as - ATI, Randtron, Datron and Space Vector-each bringing deep expertise and innovation to the defense sector. Led by a seasoned management team, Fisica is committed to excellence in engineering, manufacturing, and mission-critical solutions that enhance national security. At Fisica, we foster a strong, collaborative work culture that values individual contributions and empowers our employees. Our commitment to innovation, integrity, and teamwork makes us a leader in the defense industry and an exceptional place to build a career. Primary Function: The function of QC Mechanical Inspector has basic responsibility for implementing and maintaining quality standards, procedures and the protocol for the Quality Control functions which include Receiving Inspection and In-Process Inspection. Ensures that product is inspected and tested by company quality standards and the requirements as specified on Purchase Orders for incoming product through Vendors and In-Process Work Orders for product being manufactured In-Process (WIP). Major Responsibilities: Interprets blueprints, work orders, and other documentation to determine acceptance or rejection standards. Performs visual and dimensional inspection of first articles, assemblies, final product, and tooling, utilizing micrometers, calipers, height gauges, and other precision measuring instruments. Ink stamping of sub-assembly and final assembly, CMM and other precision measuring instruments. Documents inspection results, maintain records, and prepare reports. Routes inspected parts to appropriate destination. May perform source inspection at vendor sites. May assist in training lower-level inspectors. Performs limited, intermittent physical exertion. Works under acceptable conditions with some distraction due to occasional exposure to noise, dust, heat or chemicals. Perform QA audits as needed. Follow directions and implement added scope objectives and activities outlined by QA management. Education/Experience/Training: Requires a high school diploma and/or a minimum of 5 to 8 years of consistent mechanical inspection experience. Also requires advanced math aptitude including knowledge of trigonometry, knowledge of highly complex mil-specs, ability to read blueprints, and use of all types of measuring instruments. Considering the complex interface with every functional organization it is very important to have excellent communication skills. Additional Requirements: It is flexible to work varied shifts, overtime, weekends and travel on occasion. Able to occasionally stoop, bend, kneel, and squat. Able to occasionally push, and reach. Able to move items up to 25 pounds for distances of up to 30 feet. Must have good repetitive manual dexterity with both hands. Must have sufficient vision to see relative positions of small parts and able to discern symmetry and proper alignment. Based upon your job duties, and need to visit different areas within the company, you may be exposed to fumes, dust, toxic or caustic chemicals (well below OSHA and ACGIH exposure guidelines), outdoor weather, moving mechanical parts and/or be part of a hearing conservation program due to noise levels around certain equipment. Must wear appropriate personal protective equipment as necessary. Ability to sit for extended periods of time. Must be able to obtain and maintain a Security Clearance. Strong work-life balance. Tuition Reimbursement. Paid parental leave. In compliance with pay transparency requirements, the salary range for this role $61,000 - $113,000. This is not a guarantee of compensation or salary, as the final offer amount may vary based on factors including but not limited to experience and geographic location. Fisica Inc also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on the date of hire, and schedule type. EEO Statement Fisica is proud to be an Equal Opportunity Employer. Fisica is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, military and veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. Fisica maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Fisica is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

Here at Westfall Technik, we pride ourselves on being the fastest-growing Plastic Injection Manufacturing Company in the USA and soon globally. While many companies outsource their work, we believe in keeping our jobs in the US. We currently support over 1,500 Team Members across 15 facilities in the US, and we are still growing. At our Union City site, we invest in our people. Our overall success is largely attributed to our Team Members skills and talents, which have been impactful and essential to the growth of our business. Here, you ll get the opportunity to test your knowledge and skills and become a critical player within Westfall. We want you to view your time at Westfall as an investment in your future. We are currently seeking a Quality Inspector. Pay Rate/Shift: $22/hr +$2/hr Shift Differential for the 9pm-5:15am shift. Job Overview The Quality Inspector is responsible for inspecting materials, components, and finished products to ensure they meet specified standards and customer requirements. This role involves performing visual, dimensional, and functional inspections using measuring tools and testing equipment. The Quality Inspector documents findings, identifies defects or deviations, and works closely with production and quality teams to resolve issues. This position plays a critical role in maintaining product quality, reducing rework, and supporting compliance with internal and external quality standards. Key Responsibilities Perform First Article, In-Process, and Final Inspections Monitor and Document Quality Conduct CMM Testing Perform Dimensional and Functional Testing Report and Document Nonconformances Ensure Compliance with QMS and cGMP Assist in Audits Perform Sorting and Rework Assist in Training Inspector/Packers Ensure Safety Devices are Intact Follow Safety Procedures Job Requirements A high school diploma or equivalent is required. 2-3 years of plastic injection molding experience Excellent time management, organization, and planning skills. Advanced problem-solving and analytical skills. Must be detail-oriented Ability to multitask. Must possess good interpersonal and communication skills. Ability to promote a team atmosphere in the department and in other production-based areas. Must be able to work with minimal supervision, self-starter, and have high initiative. Computer skills. WORK ENVIRONMENT The work environment is usually in an office within a manufacturing facility with low to moderate noise level. The work environment characteristics described here are representative of those a Team Member encounters while performing the essential functions of this job. Westfall -Technik is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, national origin, ancestry, sex, gender, gender identity, gender expression, pregnancy, childbirth or related medical conditions, religious creed, physical disability, mental disability, age for individuals age 40 and over, medical condition (as defined by state law (for example, cancer or genetic characteristics or HIV/AIDS), marital status, military and veteran status, sexual orientation, genetic information, citizenship status or any other characteristic protected by federal, state or local law. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, Team Member activities and general treatment during employment

About Us: Toray Advanced Composites (TAC) is a leading supplier of advanced composite materials for the aerospace, sporting goods, motorsport, and industrial markets. You will find our thermoset composite products on nearly every satellite, space launch vehicle, unmanned aircraft, military and commercial aircraft in production today. TAC also provides composites materials to industrial and recreational applications including mountain bikes, medical prosthetics, and sports equipment. Our thermoplastic prepregs, known in the industry as Cetex , are found in a wide range of commercial and military aircraft, including large wing structures and interior applications like seats and galleys. Our Cetex products are available in unidirectional tape or fabric form in a variety of engineered thermoplastic resins including PEEK, PPS, PEI as well as a full line of performance thermoplastics including Nylon, PET, PC/ABS, HDPE, and PP. JOB TITLE: Quality Technician II REPORTS TO: Quality Supervisor SUMMARY OF FUNCTIONS: The Quality Technician II will support Toray's quality team in one or more phases of the lab. In this role, the Quality Technician II will uphold Toray's quality standards which are set in place by the organization, customers, and management. Roles and responsibilities are subject to change. Quality Technician Level Breakdown: Level Description III: Competent in 3 or more lab phases, or Mastery of 2 lab phases and competent in another. II: Competent in 2 or more lab phases, or Mastery of 1 lab phase and competent in another. I: Entry level to attain competency in 1 or more phases of the lab. MAJOR DUTIES AND REQUIREMENTS: Quality: 3 levels of QA lab technicians exist, broken up by competency in the lab phases. Technician roles are filled based on need, but cross-training is encouraged. General Knowledge: Familiarity with composite materials, specifically carbon fiber and fiberglass composites Knowledge of time and temperature-sensitive (TATS) materials Use of Microsoft Excel workbooks and Microsoft Access to record and report data Ability to read and follow written Lab Request instructions Communicate discrepancies or non-conformances to Supervisor and/or Quality Engineer Strong ethic regarding data integrity Usage of FIFO “first in, first out” for self-scheduling assignments Record and document work performed each day in a “pass down” email to the supervisor if working off shifts Layup Phase Technician: Support the Layup Phase with the following: Document incoming material traceability information into Toray's database Use of ply cutter to kit plies of prepreg required for panels Layup prepreg panels for acceptance testing per documented test plans Layup test coupons with resin films, foams, and other aerospace materials Program cures into the digital oven and autoclave and record the collected data Physicals Phase Technician: Support the Physicals Phase with the following: Use scales, calipers, and other devices to measure the size of prepreg/other samples Use ovens/furnaces to perform prepreg testing Use acids (acetone/NMP) to perform prepreg testing Visually or otherwise inspect prepreg specimens to outlined criteria Sample Cutting Phase Technician: Support the Sample Cutting Phase with the following: Knowledge of machining best practices for composite materials Familiar with industry-standard tolerances for coupon geometry Use calipers and micrometers to ensure cut coupons meet required tolerances Prepare samples through abrading, cleaning, and application of adhesive for testing Maintain coupon traceability throughout multiple machining operations Mechanical Phase Technician: Support Mechanical Phase with the following: Use calipers/micrometers to properly report the dimensions of test samples Ensure test coupons meet required tolerances Use Instron test frames to test specimens Able to use Blue Hill software to perform testing Perform mechanical tests on prepared samples to ASTM/other industry standards Troubleshoot minor issues with test setups/test frame configurations Apply strain gages to the surface of test coupons. FV/Density Phase Technician: Support FV/Density Phase with the following: Use calipers/micrometers/scales to properly report the dimensions of test samples Be familiar with the use of acids (sulfuric/nitric/MEK) to perform sample digestions Use ovens/furnaces to cure or perform burn-offs for testing Use of CEM microwave digestion system to perform acid digestion Use of Pycnometer and processes to perform density testing Analytical Phase Technician: Support Analytical Phase with the following: Use calipers/micrometers to properly report the dimensions of test samples Use of ovens/furnaces to perform testing Ensure test coupons meet required tolerances Use of Rheometer and Dynamic Mechanical Analysis to perform testing to ASTM/other industry standards Use of Thermal Mechanical Analysis (TMA) to perform testing to ASTM/other industry standards. Use of Differential Scanning Calorimetry (DSC) to perform testing to ASTM/other industry standards. Use of High-Performance Liquid Chromatography (HPLC) to perform testing to ASTM/other industry standards. Use of Fourier-Transform infrared spectroscopy (FTIR) to perform testing to ASTM/other industry standards. Perform required routine validations on equipment Troubleshoot minor issues related to equipment configurations and sample loading. Dimensional Inspection Phase Technician: Support the Dimensional Inspection Phase with the following: Inspection of incoming and outgoing products to engineering specifications using basic test and measuring equipment Ability to work with handheld gauges, such as calipers, micrometers, height gauges, pin gauges, thread gauges, etc. Ability to work with Coordinate Measurement Machine (CMM) and Portable Coordinate Measurement Machine (PCMM). Knowledge of PCDMIS CAD ++ inspection software (preferred) Familiar with CAD models (IGES, Step, Solidworks, Catia) Ability to read and interpret blueprints and know definitions of critical, major, and minor characteristics using (ASME Y14.5) Geometric Dimensioning and Tolerancing (GD&T) discipline Ability to measure parts and determine if they are meeting print specifications Inspect first part against each measurement as indicated on print. Verify acceptable tolerance. Indicate completed inspection on the corresponding inspection record Experience with engineering drawings & tolerance, standards & specifications in accordance with (ASME Y14.5) Geometric Dimensioning and Tolerancing (GD&T) Choose and check the calibration of the inspection equipment to be used Perform visual and dimensional inspection of purchased parts, tight tolerance machined parts, stamped and fabricated parts, components, assemblies, and materials. Perform first article inspection, incoming, in-process, and final inspections on new and revised parts Generate, distribute, and file inspection reports as required Document non-conforming products when detected. Attach Red Tag and/or Red NC tags to the non-conforming product Timely completion of all paperwork associated with the position including NC tags Complete and maintain all documentation per customer and/or internal requirements Responsible for the completeness and accuracy of all work performed Safety: Follow safety procedures for PPE (personal protection equipment) Properly dispose of hazmat waste Maintain a clean working environment through a “clean as you go” mentality EXPERIENCE AND/OR EDUCATION REQUIREMENTS: Minimum of high school diploma or equivalent At least 2 years of experience working with composites or productions or quality Must be capable of lifting up to 25 lbs. Basic computer skills (MS Suite) required Must be able to follow written and verbal instructions for machine operation Must be able to communicate clearly (written and verbally) in English Must be able to follow written and verbal instructions by reviewing SOPs and customer specification Understand basic laboratory terminology Understand weights and measurements in metrics and standard units Ability to operate calipers, micrometers, and scale Able to work and communicate as a team Maintain work areas in a neat, orderly, and safe manner Excellent attendance; ability to work overtime, weekends, and off shifts when needed BENEFITS AND PERKS: Comprehensive Medical, Dental, and Vision Insurance Plans FSA/HSA Plans Available Paid Holidays Gym Membership Tuition Reimbursements 401(k) Plan with Company Match Paid Time Off Employee Engagement Events Referral Bonus Program Life Insurance and AD&D Coverage Short-Term and Long-Term Disability Insurance Parental Leave & Paid Family Leave Plus much more! COMPENSATION: $25.00-$36.00/hr DOE Toray Advanced Composites employment practices offer equal employment opportunity and does not discriminate against its employees or applicants because of race, color, religion, sex, pregnancy, national origin, ancestry, age, marital status, physical or mental disability, medical condition, sexual orientation, or any other basis prohibited by law. Equal employment opportunity will be extended to all persons in all aspects of the employer/employee relationship, including recruitment, hiring, training, promotion, transfer, discipline, layoff, recall, and termination.

Title: Quality Technician Schedule: Monday Friday Pay Range: $30-$36/hr on w2 The Quality Technician will report to the Receiving Quality team lead and will have the goal to support the development of business processes to ensure that products and services provide a high level of quality that meets defined standards and specifications. This role will be helping in establishing high quality standards and ensuring product quality standards are met through inspection, documentation, and process improvement activities across receiving quality operations. The role will support quality management systems by conducting audits, performing root cause analysis, and implementing corrective actions while collaborating with cross-functional teams to maintain high-quality standards in manufacturing and services. In this role you will: Perform part level quality inspection to ensure the product is meeting specifications. Process incoming material and validate conformance to established quality standards Document various procedures and work instructions Support creating and reporting metrics to demonstrate quality status Enter test result data into SAP and JIRA systems Help in Root Cause Analysis activities, Corrective Action implementation and validation Support process improvement activities Work with cross-functional teams as needed Create inspection plans to conduct visual, functional, and mechanical measurements, & tests across multitudes of parts ranging from injection molding, castings, 3D printing parts to PCBAs, and electrical sub-assemblies Perform Metrology tasks using CMM as needed Previous mechanical, electrical, and electronics equipment inspection background with ability to use precision measurement tools Experience in defining and executing quality inspection criteria for the injection molding, castings, 3D printing parts to PCBAs, and electrical sub-assemblies is required Qualifications Minimum 2 years experience in the manufacturing environment (automotive, semiconductor, or aerospace fields are preferred). Experience in performing Quality inspections based on control plan Familiarity with Google suite (Google Docs, Google Sheets, Google Slides) Strong planning, organizational, analytical, interpersonal, decision-making, oral and written communication skills Bonus Qualifications Previous experience in SAP and/or JIRA system Industry background and/or experience in;automotive, software, contract manufacturing, customer management

As a Quality Control Inspector, you will play a critical role in maintaining and improving the quality standards of our products. Your primary responsibility is to ensure that quality documents and records are accurately maintained using specialized software. In addition, you will support data collection and update Key Performance Indicator reports, investigate product non-conformities, and coordinate with engineering and management to resolve issues. **Responsibilities** + Utilize specialized software to maintain quality documents and records. + Provide support with data collection and update reports for Key Performance Indicators. + Investigate product non-conformities and coordinate with engineering and management. + Support the engineering department in executing quality-related tasks as needed. + Interpret engineering drawings for product inspection and validation. + Issue Engineering Change Requests for product/manufacturing specifications updates. + Communicate quality-related issues and issue Corrective Action reports. + Maintain organization and cleanliness in the Quarantine area for non-conforming material. + Interface with customers to resolve quality-related issues and inquiries. + Assist with quality management system audits occasionally. + Collaborate with Engineering, Machine Shop, and Safety departments. + Maintain 5S implementation throughout the facility. **Essential Skills** + At least 1 year of experience working in a manufacturing/production facility. + Proficient with Microsoft applications including Word, Excel, and Outlook. + Ability to read and understand blueprints and GD&T. + At least 2 years of experience with measuring instruments such as calipers, scale, protractor, and tape measure. + Experience in inspection, quality control, and quality assurance. **Additional Skills & Qualifications** + Preferably Geometric Dimensioning and Tolerancing (GD&T) experience. **Why Work Here?** Join a team where 80% of contractors transition to permanent positions after a short 90-day contract. Experience a work environment that values growth and development. **Work Environment** Work in a dynamic manufacturing facility with a commitment to maintaining high-quality standards. The environment supports collaboration across departments, ensuring comprehensive quality management. **Job Type & Location** This is a Contract to Hire position based out of Pittsburg, CA. **Pay and Benefits** The pay range for this position is $23.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Pittsburg,CA. **Application Deadline** This position is anticipated to close on Jan 31, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Join our mission-driven Quality team as the Quality Control Inspector at Endologix! WHO WE ARE: Endologix LLC is a California-based global medical device company dedicated to improving patients' lives through innovative therapies for the interventional treatment of vascular disease. Our therapeutic portfolio addresses clinically relevant unmet needs, spanning from abdominal aortic aneurysms to lower limb peripheral vascular disease. We are committed to delivering excellent clinical outcomes through precision in product design, advanced manufacturing, and comprehensive physician training-supported by industry-leading clinical evidence. At Endologix, we're driven by purpose, innovation, and the opportunity to make a lasting impact in vascular health. What sets us apart is not just our technology, but our culture. At Endologix, we foster a forward-thinking, mission-driven environment where every team member plays a vital role in advancing patient care. Our values guide how we operate: we prioritize patient outcomes, act with integrity, stay curious and innovative, move boldly in pursuit of excellence, and collaborate across teams and with physicians to achieve exceptional results. As for our people? We empower them with the tools, trust, and continuous learning they need to grow. If you're passionate about making a meaningful difference in healthcare, you'll find purpose and belonging here. ABOUT THE ROLE: We're looking for a Quality Control Inspector to join our mission-driven Quality team. In this role, you'll be responsible for performing inspections of components, subassemblies, and finished medical devices to ensure compliance with quality standards and regulatory requirements. This includes conducting quality checks, performance tests, reviewing documentation, and verifying Device History Records (DHR) for product release in accordance with the medical device Quality Management System (QMS). Responsibilities WHAT YOU'LL DO: * Perform audits, inspections, configuration checks, and functional testing to ensure product quality and compliance with established procedures. * Review and verify lot history records for completeness, accuracy, and adherence to SOPs; investigate records related to customer experience reports. * Inspect subassemblies, finished products, purchased components, and tools using defined criteria and standard mechanical, and/or electrical measurements. * Conduct product rework on subassemblies or finished goods as required. * Accurately document inspection and testing results in compliance with Good Documentation Practices (GDP). * Review Device History Records (DHR) for compliance with established procedures and GDP requirements. * Identify issues and provide initial recommendations for corrective actions or process improvements to supervisors. * Perform product testing to ensure conformance to quality standards. * Work within a cleanroom environment, following all applicable protocols and safety requirements. * Perform temperature and particle count monitoring; manage ERP (QAD) and MES application transactions; handle multiple tasks efficiently in a fast-paced manufacturing environment. * Perform other duties as assigned by the supervisor. * Demonstrate punctuality, reliability, and a strong work ethic. Qualifications WHAT YOU'LL BRING: Education: * High School Diploma or equivalent required. Experience: * 1-5 years of Quality Control experience, preferably in the medical device industry. Skills/Competencies: * Ability to understand and follow technical procedures, work instructions, and basic specifications related to the inspection of products and components. * Skill in identifying relevant information in technical drawings and documents and reporting any discrepancies to the supervisor. * Familiarity with applicable quality standards and willingness to learn about specific regulations under supervision * Mechanical aptitude and working knowledge of measurement instruments. * Strong written and verbal communication skills for reports, correspondence, and presentations. * Mathematical proficiency in fractions, percentages, ratios, and proportions. * Problem-solving skills with the ability to work in a cross-functional environment and manage multiple priorities. WHAT WE OFFER: At Endologix, we know that great work starts with great people - and people do their best when they feel valued and supported. That's why we offer competitive pay, solid benefits, career growth, a culture that genuinely cares, and the flexibility you need to thrive both at work and at home. But more than that, we offer purpose. You'll be part of a team that's making a real impact on patients' lives. When you join us, you're not just taking a job, you're building a meaningful career with a team that's invested in your success. The compensation package includes: * Hourly rate of $24.03/hr-$29.44/hr * Discretionary bonus * Equity participation as approved by Board of Directors (4-year vesting schedule) * Comprehensive health, dental, and vision insurance plans * Generous PTO and holiday schedule * 401(k) retirement plan with company match Plus: * Employee wellness initiatives and mental health support * Collaborative and inclusive company culture focused on impact and innovation * Opportunities for career growth and internal mobility HOW WE LEAD WITH OUR CORE VALUES: * Patient Outcomes Drive Us: We improve lives with every advancement we deliver. * Integrity Defines Us: We do what's right, stay transparent, prioritize quality, and own our actions. * Innovation Advances Us: We stay curious, adaptable, and push boundaries. * Boldness Propels Us: We take smart risks and are unafraid in our pursuit of excellence. * Collaboration Unites Us: We partner across teams and with physicians to drive exceptional results. OUR COMMITMENT TO EQUAL OPPORTUNITY & VETERAN INCLUSION: Endologix LLC is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. As a federal contractor, Endologix LLC is committed to taking affirmative action to recruit, employ, and advance in employment qualified individuals with disabilities and protected veterans.

Duties and Responsibilities: Perform inspections of purchased parts according to acceptance criteria using standard sampling plan. Able to perform First Article Inspection (FAI) of manufactured parts, electromechanical assemblies and final assemblies. Physical, mechanical and/or electrical measurements in compliance with the company Quality System. Accurately document results of inspection / testing and maintain controlled document files, logs and test records. Inspect cables per wiring configuration. Initiate non-conformance process and assist in resolving non-conformances. Monitor receiving inspection backlog. Able to be flexible with the work schedule. Process SAP transactions to segregate and disposition non-conforming product. Other duties and responsibilities in the Quality Department as assigned. Ability to conduct basic troubleshooting and problem resolution. Education and Experience: High School Diploma or Equivalent. Preferred one year of experience in an FDA regulated environment and/or ISO 13485 standards in the medical device industry and/or in-vitro diagnostics preferred. Technical and physical position requirements: Familiar with measuring equipment such as micrometer, caliper height gauges, plug gauges. Able to lift at least 35 lbs. Strong attention to details and ability to understand and follow complex procedures. Working knowledge and experience in basic computer applications such as Microsoft Word, Excel and Outlook. Effective and clear written and verbal communication skills in English language. The US base salary range for this full-time position is $20.60 - $31.60. Our salary ranges are determined by role, level, and location. The range displayed on each job posting reflects the base pay target range for new hire salaries for the position. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. In addition to compensation, Zoetis offers a comprehensive benefits package that supports the physical, emotional and financial wellbeing of our colleagues and their families including healthcare and insurance benefits beginning on day one, a 401K plan with a match and profit-sharing contribution from Zoetis, and 4 weeks of vacation. Visit zoetisbenefits.com to learn more. Full time RegularColleague Any unsolicited resumes sent to Zoetis from a third party, such as an Agency recruiter, including unsolicited resumes sent to a Zoetis mailing address, fax machine or email address, directly to Zoetis employees, or to Zoetis resume database will be considered Zoetis property. Zoetis will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume. Zoetis will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. This includes any Agency that is an approved/engaged vendor but does not have the appropriate approvals to be engaged on a search. Zoetis is committed to equal opportunity in the terms and conditions of employment for all employees and job applicants without regard to race, color, religion, sex, sexual orientation, age, gender identity or gender expression, national origin, disability or veteran status or any other protected classification. Disabled individuals are given an equal opportunity to use our online application system. We offer reasonable accommodations as an alternative if requested by an individual with a disability. Please contact Zoetis Colleague Services at ********************************** to request an accommodation. Zoetis also complies with all applicable national, state and local laws governing nondiscrimination in employment as well as employment eligibility verification requirements of the Immigration and Nationality Act. All applicants must possess or obtain authorization to work in the US for Zoetis. Zoetis retains sole and exclusive discretion to pursue sponsorship for the acquisition or maintenance of nonimmigrant status and employment eligibility, considering factors such as availability of qualified US workers. Individuals requiring sponsorship must disclose this fact. Please note that Zoetis seeks information related to job applications from candidates for jobs in the U.S. solely via the following: (1) our company website at ********************** site, or (2) via email to/from addresses using only the Zoetis domain of “@zoetis.com”. In addition, Zoetis does not use Google Hangout for any recruitment related activities. Any solicitation or request for information related to job applications with Zoetis via any other means and/or utilizing email addresses with any other domain should be disregarded. In addition, Zoetis will never ask candidates to make any type of personal financial investment related to gaining employment with Zoetis.

The Quality Control Inspector is responsible for verifying that products manufactured by Sierra Circuits, Inc. meet the requirements of our customers using various inspection tools and inspection methods. KEY RESPONSIBILITIES: QC Inspector Visual inspection under magnification on printed circuit boards. Identify quality defects to conformance specs and complete reject report (NCMR). Obtain FAI report and packaging requirements before moving the order to shipping. Maintain clean and orderly workspace. Perform final count of acceptable parts and sign the traveler. Complete first article report / or AS91002 report. Other duties as assigned. QUALIFICATIONS - KNOWLEDGE/SKILLS- EXPERIENCE: Excellent oral and written communication skills. Exceptional multi-tasking, organizational skills, strong attention to detail and accuracy. Strong interpersonal skills and ability to work with all levels of management Self-motivator and a sense of ownership and urgency. Must be able to maintain confidentiality & professionalism at all times. Proficient in Microsoft Office, using Excel, PowerPoint, and Word required. Read, write and communicate in English. Basic arithmetic in reference to instructions where interpretations are required. Ability to visually verify fine detail work. Ability to understand and follow directions when inspecting printed circuit boards. Basic understanding of prints and specifications, ability to complete FAI reports and communicate via email with customer inquiries. Moderate physical lifting of up to 20-Ibs Some out-of-department in-process inspection. SUPERVISES: None PHYSICAL DEMANDS: The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. While performing the duties of this job, the employee is regularly required to talk or hear. The employee must frequently stand, walk, and reach with hands and arms. The ability to lift 20-40 lbs., open filing cabinets, and bend, stand, or climb on step ladders as necessary. ENVIRONMENT: Office and Manufacturing - Comply with safety and protective equipment as required. California Hourly Salary range from $20.00 - $26.00 with Benefits and Perks. Day Shift and Night Shift

Akkodis is seeking an Inspector, Quality Control for a Contract with a client in Pleasanton, CA. Candidate will perform visual inspection of incoming and in‑process components to ensure conformance with quality standards. Rate Range: $25/hour to $27/hour; The rate may be negotiable based on experience, education, geographic location, and other factors. Inspector, Quality Control job responsibilities include: * Perform routine visual inspection of electronic, mechanical, and electro‑mechanical components to verify conformance with quality standards. * Review and accurately follow written instructions, drawings, and inspection criteria to ensure proper evaluation of materials. * Document inspection results using multiple computer applications and maintain accurate records within internal systems. * Identify, segregate, and report non‑conforming materials, escalating issues when necessary. * Support in‑process inspection activities to ensure product quality throughout the manufacturing workflow. * Collaborate with team members and communicate clearly to resolve basic inspection‑related questions or discrepancies. Required Qualifications: * High school diploma or equivalent. * Minimum 1 year of experience in visual inspection or related quality roles. * Strong English reading comprehension and communication skills. * Ability to navigate multiple computer applications for documentation and inspection tasks. If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at ******************************. Pay Details: $25.00 to $27.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ****************************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: * The California Fair Chance Act * Los Angeles City Fair Chance Ordinance * Los Angeles County Fair Chance Ordinance for Employers * San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Full-time Description Perform finished product inspections by confirming specifications, conducting visual and measurement tests and rejecting and documenting unacceptable products. Maintain quality standards by performing in-process and finished products. Visually inspect products to ensure they are meeting requirements and specifications. Perform incoming inspection of components in accordance with company standards. Perform product testing/inspection. Complete final inspection of products prior to shipment. Fulfill customer component order inspection. Document all inspection results and any re-work that must be completed. Thrives in a fast-paced work environment, managing multiple priorities with speed, adaptability, and attention to detail. Additional projects/ roles/ responsibilities assigned by management. Requirements High school diploma or equivalent 3+ years of QC experience in cable and wire harnesses Must be able to use gauges, calipers, micrometers, rulers Basic math and computer skills Must be able to read blueprints Experience working in an engineering/manufacturing environment and/or Quality Management System experience, a plus. Salary Description $23.25 - $27.75

Quality Control Inspector III Department: Quality Reports To: Quality Supervisor FLSA: Hourly, Full-Time, Non-Exempt Revision Date: January 2026 About Vitesse: How we communicate, capture, and share information has not changed significantly in our lifetime-it has changed significantly in the last decade, even in the last year. From a vacationer checking email as they fly across the world to a U.S. military service member sharing critical observations across the battlefield, the ability to capture and transfer data over different platforms is an important part both of our everyday lives and the security of our country. Whether on a geostationary satellite, a naval vessel, or a military jet, the mission-critical solutions that we design and manufacture at Vitesse make our country and our world safer. Through extensive technical expertise, Vitesse Systems is optimizing the functionality of antenna and thermal management systems for the advancement of next-generation Radar, Electronic Warfare, and C4I (Command, Control, Communications, Computers, and Intelligence) systems. Vitesse Systems prides itself on the solutions we provide to our customers, as well as the incredible team of dedicated people we employ. SUMMARY: The Quality Inspector is responsible for performing comprehensive inspections across a range of characteristics-visual, dimensional, and documentation-based-to verify conformance to engineering drawings, internal specifications, and customer requirements. Commitment to and support of the Company Core Values are key to success in this position. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform visual, physical, and dimensional inspections of mechanical components and assemblies at various stages of the manufacturing process (first article, in-process, final). Inspect both attribute (e.g., visual defects, surface finish) and variable (e.g., exact dimensional measurements) characteristics per technical documentation. Use a wide range of precision measurement instruments including micrometers, vernier calipers, height gauges, dial indicators, optical comparators, and coordinate measuring machines (CMM), as required. Verify completeness and accuracy of documentation packages including inspection records, material certifications, special process certifications, and work travelers. Interpret engineering drawings and GD&T requirements with moderate supervision. Document inspection results clearly and accurately in accordance with internal procedures and applicable standards (e.g., AS9100). Identify, document, and escalate nonconformities, support quality team in root cause investigation and corrective action implementation. Assist in calibration verification of inspection tools and gages as needed. Maintain a clean, organized, and safe work area; actively participate in quality and safety improvement initiatives. Other duties as assigned. SUPERVISORY RESPONSIBILITIES: This position has no supervisory responsibilities. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation(s)may be made to enable individuals with disabilities to perform the essential functions. Successful accomplishment of duties and responsibilities may require the following: Must have the knowledge and experience necessary for the position. Must be able to follow instructions and procedures and work with minimal supervision. Must be capable of reading drawings and inspecting the work being performed. Ability to interpret engineering drawings/blueprints Excellent documentation skills Good communication and organizational skills Basic knowledge of Microsoft Word and Excel, and managing files and folders in Windows Customer service oriented Knowledge of AS9100, AS9102 and AS9145 quality standards a plus EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) Secondary education (degree, associate's degree or institutional/vocational training) an asset 3-5 years of experience in a mechanical inspection, quality control, or related manufacturing role an asset LANGUAGE SKILLS: Ability to speak and understand basic safety and manufacturing instructions. MATHEMATICAL SKILLS: Ability to add and subtract two-digit numbers. Ability to multiply and divide with 10's and 100's. REASONING ABILITY: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS: Authorization to work in the United States. To conform to U.S. export control regulations, you should be eligible for any required authorizations from the U.S. Government. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by a Team Member to successfully perform the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the Team Member is regularly required to stand, walk, and hear. The Team Member frequently is required to use hands and fingers; handle, feel, and reach with hands and arms. The Team Member is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl; and smell. The Team Member must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environments characteristics described here are representative of those a Team Member encounters while performing the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the Team Member is regularly exposed to moving mechanical parts. The Team Member may be exposed to a hot and/or cold work environment, chemicals, fumes or airborne particles, loud noises, risk of electrical shock and vibration and/or other occupational hazards; personal protective equipment may be required. NOTE: This identifies the general nature and scope of work to be performed. Vitesse Systems, LLC. reserves the right to revise all or any part of this and to add or eliminate essential job functions at any time. Designation of any job duty as an essential function is not intended as an assurance or guarantee that a team member has any right to perform the particular job duty, except as required by Vitesse Systems, LLC. This job description is subject to change based on the needs of the position and/or the Company. Vitesse Systems, LLC performs work controlled by the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). These statutes require the protection of technical data and products. The regulations require that such data not be disclosed in written, oral, or visual form to any foreign national without prior export authorization from the Department of State. A foreign national is defined by the U.S. Government under EAR 734.2(b)(2)(ii) and 8 USC 110 (a)(20) as one who: Is not a United States citizen Is not lawfully admitted for permanent residence in the U.S. Does not have politically protected status (embassy, refugee, or asylum) Has dual U.S. / foreign citizenship Vitesse Systems, LLC is an Equal Employment Opportunity / Affirmative Action (EEO/AA) Veterans / Disabled Employer.