Quality inspector jobs in Santa Clarita, CA - 382 jobs

Who we are: The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products. Summary: The CMM Quality Inspector by using the Gill Process Documents (i.e.: GPS, GMS, GOS), performs essential duties to meet customer and AS9100 requirements and supports engineers with complex tasks. This position also works on quality-related projects with direction from the Quality Control Manager. Essential Duties and Responsibilities include the following. Other duties may be assigned. Follow company policies and procedures Comprehend and ensure compliance with internal quality documents, and customer specifications Read and understand customer specifications, process standards, drawings (blue prints), ANSI procedures, and industry standards. Coordinate with CNC production to inspect and rework parts in a timely matter. Must be able to setup, program, and operate Coordinate Measuring Machines, both traditional in-place and articulated-arm (Romer) devices. Proficient in reading blueprints, understanding GD&T, and working with associated technical documents. Proficient in the selection of appropriate hand-held and/or surface plate measuring equipment appropriate to the task. Comfortable providing instruction for the development of Inspection employees within the organization. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications and Education (Required) Functionally capable in the use of Microsoft Office and other basic computer software. Ability to comfortably multitask with minimal supervision. Ability to effectively communicate verbally and in writing Acceptable Vision Test results Hexagon Metrology coordinate measuring machine level 1 Working knowledge of PC-DMIS software ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee. The Gill Corporation is an Equal Opportunity Employer . Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances. The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department

Job Description Purpose : Responsible for maintaining quality standards by approving incoming materials, in-process production, and finished products; recording quality results. Essential functions: Approves incoming materials by confirming specifications; conducting visual and measurement tests; rejecting and returning unacceptable materials Approves in-process production by confirming specifications; conducting visual and measurement tests; communicating required adjustments to production supervisor Approves finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work Documents inspection results by completing reports and logs; summarizing re-work and waste; inputting data into quality database Keeps measurement equipment operating by following operating instructions; calling for repairs Maintains safe and healthy work environment by following standards and procedures; complying with legal regulations Updates job knowledge by participating in educational opportunities; reading technical publications Accomplishes quality and organization mission by completing related results as needed Minimum qualifications: Familiar with PME utilized in machined part inspection, Analyzing Information, Reporting Research Results, Documentation Skills, Promoting Process Improvement, Safety Management, Manufacturing Methods and Procedures, Supports Innovation Must have good English written and verbal communication skills Have good arithmetic skills Have mechanical aptitude Must have knowledge of precision measurement instruments Be proficient in Microsoft Excel and Microsoft Word Must be attention to details Ability to work in a team environment Experience/Education: 2+ years' experience in aerospace manufacturing/machine shop required ISO 9001-2008 and AS-9100 experience preferred CMM experience preferred High school diploma or equivalent Working conditions: While performing the duties of this job, the employee is regularly required to use hands and arms to perform repetitive motions; to sit, stand, bend, reach, talk, hear and move around the facility Must have close visual acuity to perform daily duties such as: visual inspection involving small defects, small parts and/or operation of machines (including inspection); using measurement devices Must be able to lift up to 50lbs if required Required to work on concrete floors, wearing steel toe shoes and safety goggles 4/10 scheduled. May work over-time if scheduled. Worker is subject to noise, hazards, atmospheric conditions, oils May be required to wear a respirator Success factors: Consistent personality, dependable nature, attention to detail and willingness to learn and train others are absolutely necessary. Company DescriptionEstablished in 2007, IPanel Systems Inc. is now moved to Valencia, California. We specialize in manufacturing machined parts and customized avionics display components including simulated products for both military and commercial applications. Our in-house capabilities (CNC Machining, Painting, Laser Markings, Light Balancing...etc) allow us to cost-effectively build these products in short turn-around time without compromising the quality or customers expectations. Our website: Company DescriptionEstablished in 2007, IPanel Systems Inc. is now moved to Valencia, California. We specialize in manufacturing machined parts and customized avionics display components including simulated products for both military and commercial applications. Our in-house capabilities (CNC Machining, Painting, Laser Markings, Light Balancing...etc) allow us to cost-effectively build these products in short turn-around time without compromising the quality or customers expectations.\r \r Our website:

Inspects facility maintenance activities during and upon completion for conformance to manufacturers guidelines, regulatory requirements and company standards Essential Duties and Responsibilities Conduct QC inspections and audits on contract requirements, and other services performed. Prepares reports, develops quality plans, attends meetings as directed; performs other duties as assigned. Checks randomly selected samples, and verifies accuracy of equipment or process. Maintains a safe and healthy work environment by following standards and procedures, complying with legal regulations. Accomplishes quality and organization mission by completing related results as needed. Schedule inspection activities. Knowledge, Experience and Skill Requirements Knowledge of OSHA standards, NFPA, Joint Commissioning and safety procedures with skills in conducting accident investigations and safety inspections. Basic knowledge of mechanical systems, critical thinking skills, and proficiency with standard testing tools. A thorough understanding of ISO 9001:2015 standards Knowledge of recognized and generally accepted good engineering practice regulations and codes. Excellent analytical and computer skills, specifically in MS Office Suite. Strong written and oral communication and presentation skills. Strong teamwork and interpersonal skills Work Experience Five (5) years of experience in quality management for facility operations & maintenance of industrial equipment at an industrial facility requiring compliance with ISO 9001. Must hold Certified Quality Technician (CQT) certification through American Society for Quality. Must have the communication skills required to interface and coordinate with others. Experience working from building plans, blueprints, wiring diagrams, engineering drawings, and electrical maintenance and repair manuals Capable of performing physical labor including, walking, standing, lift up to 40lbs, pulling, climbing up and down ladders and agility/dexterity to perform duties assigned. Education, Licenses and Certification Required: High School Diploma OSHA Certification Certified Quality Technician (CQT) certification through American Society for Quality. This job description is subject to change by the employer as the needs of the employer and requirements of the job change. J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $40,000 to $60,000. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

(**************** is in North Orange County in the city of Brea, California. Life Science Outsourcing, Inc (LSO) is a contract manufacturer of medical devices with in-built capabilities to offer clients full-service solutions through our six divisions. Clients rely on LSO to perform all activities required to introduce their products to market, from sourcing to drop shipping. We are looking for a proactive and enthusiastic Receiving QC Inspector with a good positive energy to join our team. In this role you will be responsible for ensuring that all incoming medical devices meet the necessary quality standards and comply with all applicable regulations. We encourage you to submit a resume with salary requirements. Job Description Perform incoming inspection of medical devices, including visual inspection and dimensional measurement Verify an document product compliance with regulatory and company requirements Identify and document non-conformance found during inspection Participate in investigations related to non-conformance or product quality issues Assist with the development and implementation of inspection procedures Maintain accurate and up-to-date records of inspection results Communicate effectively with team members, supervisors, and other departments as needed Qualifications To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The requirements listed below are representative of knowledge, skill and or ability required. High school diploma or equivalent Experience in quality control related field preferred Knowledge of medical devices regulations and standards preferred Ability to use measuring tools and equipment Detail-oriented with excellent organizational and communication skills Ability to work independently and as part of a team Proficient in Microsoft Office applications, Word and Excel PHYSICL DEMANDS This position requires the ability to work on your feet for extended periods of time, as well as the ability to bend, stoop and lift objects. Walk extended distances as needed. Additional Information All your information will be kept confidential according to EEO guidelines.

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Schedule This is a 3 - 4 x 11 rotating shift working alternating Wednesdays. Shifts Available Sun - Wed 1st shift (5am - 4:30pm) Sun - Wed 2nd shift (4pm - 3:30am) Wed - Sat 1st shift (5am - 4:30pm) Wed - Sat 2nd shift (4pm - 3:30am) Purpose This Lead role is accountable for driving inspection excellence across the organization. In addition to performing complex metrology work, this position provides day-to-day leadership, mentorship, and coordination for the inspection team. The Lead ensures high standards are upheld, inspection priorities are managed effectively, and knowledge is developed across the team. Through technical expertise and a hands-on presence, you will guide peers, foster collaboration, and deliver accurate inspection results that ensure compliance with engineering specifications. The Role Perform advanced inspection and metrology work using scanners (FARO, Romer, Creaform, GOM, etc.) and 3D software (PolyWorks, Zeiss). Deliver accurate inspection files, data, and reports to ensure compliance with engineering requirements. Lead by example through direct hands-on inspection work (at least 50% of shift). Receive and provide clear shift handoffs with both written and verbal updates to maintain continuity. Prioritize and delegate daily tasks, balancing team capacity and operational needs. Conduct spot checks, provide feedback, and uphold high-quality standards across the team. Mentor and train peers, including onboarding of new inspectors and cross-training initiatives. Maintain situational awareness of work progress, equipment status, and team needs throughout the shift Foster a positive, collaborative team culture, demonstrating emotional intelligence and conflict resolution skills. Ensure the Metrology Lab remains clean, organized, and safe in alignment with 5S practices. Basic Qualifications Ability to lawfully access information and technology that is subject to US export controls Minimum 2-3 years of experience in a Quality Inspection or Metrology role in aerospace, automotive, or other high-precision production environment. High-school diploma (required). Proficiency in computer systems (Windows, Teams, Excel, etc.). Strong ability to interpret engineering drawings, GD&T, and specifications. Physical ability to lift up to 50 lbs and operate scanning equipment for extended periods. Excellent written and verbal communication skills. Strong problem-solving and analytical mindset. Team-first approach with proven ability to lead by example. Preferred Qualifications Associate degree or higher in a technical field, or equivalent work experience. Prior experience in a lead, mentoring, or training capacity. Background in cross-functional collaboration with Quality, Engineering, and Production teams. Experience in regulated or high-performance manufacturing environments. Work Environment This role is based in a dynamic manufacturing setting and may require standing and handling precision equipment for extended periods of time. Must be able to lift at least 25 lbs. Company Uniform must be worn while working. PPE must be worn while working. Compensation At Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels ABC - XYZ as evaluated through our interview process. Lead Technician / T04: $29.00 - $40.00 Senior Technician / T05: $32.00 - $44.00 Pay Range$29-$44 USD What We Offer: Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions. Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time. Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind. Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance. Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Industry: Precision Manufacturing / Machining Shift: 2nd Shift (3:00 PM to 1:30 AM, 4/10 schedule) Pay: $24-$28/hour (DOE) Schedule Notes: Candidate will train on 1st shift (6:00 AM - 4:30 PM) during the first week. Upon successful training, they will move to 2nd shift (3:00 PM - 1:30 AM). Position Overview: Seeking an experienced Quality Control Inspector to perform dimensional inspections and first article inspections within a precision machining environment. Qualifications: • Proficient with micrometers, calipers, gauges, optical comparators, height gauges, drop indicators, etc. • Experience with standard QC measuring equipment • Able to perform First Article inspections with minimal supervision • Strong math and measurement skills • Familiarity with blueprint reading & work instructions • Comfortable in a fast-paced manufacturing environment • Proficient using Windows-based software • Strong communication skills; detail-oriented and organized Responsibilities: • Perform dimensional inspections (in-process, first article, final) • Read and interpret blueprints and specifications • Monitor production operations for conformance to specifications • Reject or tag non-conforming parts/materials • Communicate inspection findings and recommended adjustments • Perform additional related tasks as needed KPG123

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

The following description is not intended as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Management retains the discretion of adding or changing the duties of the position at any time. The following description is not intended as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Management retains the discretion of adding or changing the duties of the position at any time. SUMMARY The Quality Inspector's basic functions revolve around the overall goal of preventing and/or correcting any quality problems as early in the production process as possible and to minimize the quantity of parts leaving our facility that do not meet our quality standards. Quality Inspector conducts quality checks, paperwork evaluation, and studies necessary to successfully carry out his/her duties. The Quality Inspector is to make recommendations for improvements to departments or processes that will result in eliminating the root cause of any quality issues. JOB DESCRIPTION Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Inspection during the manufacturing process, monitoring the production quality and ensure that each bus is built properly according to specifications. Responsible for examining materials for quality and identifying defects. Ensures that people, equipment, and materials are used properly to maximize productivity. Check parts, assemblies, and manufacturing processes on Bus against the specifications on the drawing to ensure they meet designated specifications. Documenting all problems/errors found in drawings, bills of materials, jigs, equipment, processes, etc. and reporting these to the appropriate department for correction. Maintaining this documented list and following up on open items until they are fixed and can be closed. Ensure quality of manufactured product. Examine materials from suppliers before sending them to production line. Inspect components, subassemblies, assemblies, and completed Bus. Test, measure, and analyze products. Record pass/fail grade of products. Produce detailed inspection reports. COMPETENCIES Incoming Material Check Mechanical Inspection Discrepancy Reporting Air Leak Testing Dyno Water Test Brake Stop Tests Torqueing Road Test Welding Inspection Identify Air Valves Read Schematics Dimension Requirements Inspection Air/Brake System Audit Propulsion System Performance Water Test Perform Audits of Calibrated equipment Technical Capacity Organizational Skills Problem Solving/Analytical Customer/Client Focus. WORK ENVIRONMENT This job operates in an office and manufacturing environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. The noise level in the work environment and job sites can be loud. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. This is largely a sedentary role; however, some filing is required. This would require the ability to lift files, open filing cabinets and bending or standing on a stool as necessary. SUPERVISORY RESPONSIBILITY This position manages all employees of the quality department and is responsible for the performance management and hiring of the employees within that department. TRAVEL As required to fulfill duties. REQUIRED EDUCATION AND EXPERIENCE College degree preferred o Minimum of 5 years of experience in manufacturing with supervisory experience. 3-5 years statistics, Experience of Quality Systems (preferably ISO 9001) and Six Sigma or other analysis experience preferred Advanced level computer skills. ADDITIONAL ELEGIBILITY QUALIFICATIONS None required for this position. RIDE Coach and Bus is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, national origin, ancestry, sex, gender, gender identity, pregnancy, childbirth or related medical condition, religious creed, physical disability, mental disability, age, medical condition, marital status, veteran status, sexual orientation, genetic information or any other characteristic protected by federal, state or local law. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, and general treatment during employment.

Job Description Job Title: Quality Control Inspector II F Reports To: Quality & Process Planning Manager Job Purpose The Quality Control Inspector II is responsible for ensuring that all products meet established quality standards and customer specifications. This role performs inspections, checks, and tests during the manufacturing process, records observations, and recommends improvements. The position requires proficiency with ERP systems to produce quality reports for internal and external use, while supporting company-wide quality initiatives and continuous improvement efforts. Duties & Responsibilities Ensure compliance with all quality check procedures throughout the production process. Perform required physical testing in accordance with Work Instructions. Develop inspection plans aligned with company and customer-specific requirements. Conduct required visual checks and verify masking accuracy against blueprints and purchase orders. Act as subject matter expert for multi-process orders. Approve internal masking with resource owners to prevent process failures. Record inspection data, document pass/fail status, and report rejections with photo evidence as needed. Tag and hold parts for review when disposition is required. Complete logbooks for Copper Sulfate and 24-hour humidity tests. Review Shop Travelers for accuracy, completion, and compliance. Verify packaging instructions are followed before shipment and ensure traceability. Inspect expedited, regular, and rework orders for proper processing. Perform random sampling inspections on large quantity orders. Gather required measurement tools and take photos, sharing findings with customers and production teams. Promote accuracy in job scanning and identify opportunities to improve shop floor efficiency. Utilize ERP software to document corrective actions and prevent recurring quality issues. Educate production staff on quality control issues and support improvement efforts. Assist Quality Engineering and Specialists with troubleshooting and corrective actions. Maintain communication via email and phone as required. Ensure inspection benches are organized and clean; maintain 5S standards and audits. Perform other duties as assigned by management. Qualifications 3-5 years of quality control inspection or related experience. High School Diploma or equivalent required. Basic blueprint reading and interpretation. Proficiency with Microsoft Office Suite and ERP systems. Strong verbal, written, and customer service skills. Experience using measuring tools (meters, gauges, calipers, etc.). Ability to work full-time, including overtime and weekends as needed. Key Competencies Strong verbal and written communication skills. Attention to detail and accuracy. Basic math and analytical skills. Documentation and reporting skills. Hand-eye coordination. Ability to stay organized and maintain good housekeeping practices.

About Us Hydrafacial is a global category-creating company focused on bringing innovative products to market and delivering beauty health experiences by reinventing our consumer's relationship with their skin, their bodies and their self-confidence. Every person here is a key player in our success. We are firm believers in making the little things count each day so the big things will follow. If this sounds like you, come check us out! This is the perfect opportunity to work with some of the best leaders in the industry while you gain the global and strategic experience to add to your professional toolbox. Job Description: Hydrafacial is proud to be an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, sex, religion, sexual orientation, national origin, gender identity, gender expression, age, disability, genetic information, pregnancy or any other protected characteristic as outlined by color, federal, state or local laws. We are committed to working with and providing accommodation to applicants with physical and mental disabilities. Hydrafacial does not accept unsolicited assistance or resumes/CVs from third party search firms. No fee will be paid in the event a candidate is hired by our company as a result of an agency referral or CV/resume submitted by a search firm to any employee at our company without a valid written search agreement. If we need additional support, we will be sure to reach out directly to one of our preferred providers. Please no phone calls or emails.

Job Description ABOUT THE COMPANY Founded in 1888, Lee Kum Kee, a Hong Kong-based global food company, specializes in creating condiments and sauces that promote Chinese cuisine worldwide. With more than 200 products to choose from, Lee Kum Kee takes the mystery out of cooking authentic and delicious Asian foods in the comfort of your kitchen. Lee Kum Kee is committed to providing authentic and innovative condiments and sauces featuring the highest quality ingredients. Armed with a unique management culture, stringent quality control, superb and innovative products, coupled with the century-long brand reputation, Lee Kum Kee has achieved unanimous recognition and won numerous prestigious awards. BENEFITS Medical, dental, life insurance covered by the company 401(k) retirement plan with company match Two (2) weeks vacations Ten (10) paid holidays POSITION SUMMARY This position performs works related to online inspection, sanitation inspection, receiving inspection, and other activities related to quality assurance and quality control. ESSENTIAL FUNCTIONS Online Inspection Conduct online inspections and verify the control parameters according to procedures and instructions for production, filling and packaging process. Record result of inspection, including weigh-up, filling temperature, packaging material, product code, container closure, etc. Perform GMP/hygiene inspection based on GMP and hygiene standards. Correct GMP/hygiene violation and report to production supervisor and/or QA Manager. All jobs shall be conducted timely according to QA/QC work instruction. Sanitation Inspection Conduct daily and monthly sanitation inspections, including pre-operation inspection and post-operation inspection. Perform ATP test and environmental swabbing. Monitor environmental air quality and inspect employees' hygiene condition. Record the result of inspection and communicate with Production Supervisor and Quality Assurance Manager. Receiving Inspection procedures Inspect incoming raw materials and packaging materials according to QA/QC work instruction. Take samples when needed according to the receiving manual Organize and update Raw Material Manual. Organize and update receiving records. Organize and update COA from suppliers Other tasks Observe and record nonconforming products / production and promptly communicate with production supervisor and Quality Assurance Manager or designee for immediate action. Make routine decisions for product holding, production line holding, etc, and verify correction and corrective action and document the incident accordingly. Calibrate equipments used for inspections and report immediately if the device is malfunction. Assist Quality Assurance Manager with any tasks related to quality compliance. Perform other special assignment from the management. SUPERVISORY RESPONSIBILITIES This position has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skills, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE This position requires with minimum a high school diploma or general education (GED). Candidate must be able to work independently and in cross-functional teams to achieve established goals. Individual must be detailed-oriented, quality-oriented, with high sense of responsibility. LANGUAGE SKILLS Candidate must be able to speak, write, read and understand English to perform daily functions. Bilingual in English/Chinese or Spanish preferred. MATHEMATICAL SKILLS Ability to add, subtracts, multiply, and divides in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written and oral form. Ideal candidate must be able to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. CERTIFICATES, LICENSE, REGISTRATIONS Not required. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands and fingers to perform daily job functions. The employee is required to stand, sit, kneel, and walk when performing essential job functions. Occasional lifting and/or move up 50 pounds. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment may be high and individual who works in certain areas needs to wear proper PPE (Personal Protective Equipment). Lee Kum Kee (USA) Inc., a division of Lee Kum Kee International Holdings Ltd., has its headquarters and manufacturing facilities in Southern California with more than 300 employees. We are looking for the best and brightest talents to join our company and work together to bring the next level of success! It is Lee Kum Kee's policy to seek and employ the most qualified persons in all jobs in a manner which will ensure equal employment opportunity as well as administer personnel actions in a manner as to not discriminate against any person on the basis of race, color, religion, national origin, age, sex, sexual orientation, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Full Time + Benefits (Medical, Dental, Vision, 401k with Company Match, PTO) Job Type: On-site Hourly Range: $19.50 - $23.00, DOE Fralock is an engineered solutions provider of specialty components and subassemblies using advanced materials for high reliability, severe environment, and technically challenging applications. We develop and manufacture custom integrated solutions. Established in 1967, we are a critical solutions provider to Fortune 500 corporations, government, and targeted OEMs in a variety of industries including Semiconductor Equipment Manufacturing, Medical and Life Science, Aerospace and Defense, Industrial, Electronics, and Energy. Fralock is headquartered in Valencia, CA with manufacturing locations located throughout Northern and Southern California. VISION To be recognized by our customers as a leading solutions provider of proprietary engineered advanced materials for high reliability, severe environment, and technically challenging applications. MISSION To create value, profitably grow, and share our success with all stakeholders. CULTURE Respect - We treat others the way they want to be treated. Integrity - We practice a high standard of ethics in our business dealings with customers, suppliers, and employees. Responsiveness - We have a sense of urgency in responding to internal and external requests and work proactively to solve problems. Excellence/Competence - We empower our people to continuously improve and execute high quality work. Teamwork - We work together to achieve Fralock business objectives by communicating at a high level, by listening and having clarity in our expectations of one another. Individual Accountability and Personal Responsibility - We do what we have committed to do when we committed to doing it. Continuous Improvement across all segments of the company This position requires access to information controlled under the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR), the successful candidate must be a "U.S. person" as defined in the ITAR and EAR (which generally means (i) be a citizen or national of the United States; or (ii) be a lawful permanent resident of the United States; or (iii) have been admitted to the United States as a refugee, or have been granted asylum, as specified under applicable law. Main Functions Perform inspections, checks and tests for quality control for the manufacture of products. Interpret complex drawings, standards, procedures, and test data. Document results of inspections. Maintain calibration system. Typical Duties Follow procedures, work, and inspection instructions in the job orders Perform inspections using CMM, Keyence, calipers, micrometers, or templates Work with Production/Receiving Inspection/Purchasing when parts are found out of tolerance Document results of inspections using First Article Report AS9102, customer-specific inspection documents, Fralock Dimensional Reports, copies of CMM report or written results in the job order Compare actual measurements to drawing tolerances using calibrated tools and inspection systems. Perform visual inspections using IPC-A-600, IPC-A-610, and J-STD-001 criteria to assess workmanship, soldering, and cosmetic requirements. Identify, tag, and document nonconforming items; coordinate with Quality and Engineering for resolution. Issue certificate of conformance Maintain CMMs and inspection tools in good condition, including inspection stamp Perform calibration of calipers, micrometers and templates, and coordinates outside calibration Update and maintain Master Calibration List Inspect materials and components upon receipt to confirm documentation, certifications, and traceability meet requirements. Conduct in-process checks to verify critical features and detect defects early in production. Perform final inspections to confirm product readiness for shipment, including dimensional, visual, and functional checks. Capture and upload inspection photos, ballooned drawings, and other evidence into QMS/ERP. Participate in containment and root cause investigation activities when quality issues arise. Maintain an organized, clean work area that supports ESD and FOD prevention. Required Skills PC literate (Excel, Word, e-mail) Knowledge in blueprint reading and geometrical tolerances; use of hand-held inspection tools and templates Minimum 2 years of quality inspection experience in a controlled manufacturing environment (aerospace, medical, or equivalent). Good communication skills both oral and written; English language proficiency for technical documentation and communication Proficiency in reading and interpreting engineering drawings and GD&T. Familiarity with basic measurement tools and inspection equipment. Competence in using MS Excel, Word, and ERP/QMS data entry. Strong attention to detail and ability to follow documented procedures. Preferred Skills Familiar with CMM inspection and Statistical Process Control (SPC) Familiarity with ISO 9001/ AS 9100 and/ or ISO 13485 Standard Experience in Aerospace, Medical or Automotive industry Knowledge of IPC-A-600, IPC-A-610, and J-STD-001 standards. Experience with flex/rigid-flex PCBs, SMT assemblies, or precision machined components. Proficiency with vision systems, CMMs, and SPC tools. AS9102 FAIR completion experience. Knowledge in calibration Education Requirements High School Diploma Experience Requirements 2 years minimum in a quality related field Physical Requirements Ability to multi-task Sitting/Walking/Standing Lifting in accordance with employee safety handbook Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of a position. Fralock provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionD.W. Mack Co., Inc is seeking a full time Junior Quality Inspector to join our team. You will conduct tests to determine the quality of finished materials and finished products. Alternative Workweek Schedule - Hours are Monday - Thursday 7:00am - 5:30pm Benefits include: Health, dental, vision, life insurance, profit sharing, vacation, sick pay Responsibilities: Inspect in-process production by confirming specifications, conducting visual measurement tests, and communicating required adjustments to the production supervisor or machine operator. Approves finished products by confirming the specifications, conducting visual and measurement tests, and communicating required adjustments to the production supervisor. Documents inspection results by completeing reports and logs. Keeps measurement equipment operating by following operating instructions and calibration requirements and calling for repairs. Maintains a safe and healthy work environment by following standards and procedures, and complying with legal regulations. Be a team member of the Quality department and support production and other internal departments to further th interest of the company. Qulaifications: Previous work experience in quality control or other related fields Strong attention to detail Strong analytical and critical thinking skills Excellent written and verbal communication Basic computer and math skills to calibrate and measure specifications Blueprint reading Ability to use measuring devices such as gauges, meters and calipers Experience in the Aerospace industry a Plus Conversational Spanish a Plus About D.W. Mack Co., Inc : D.W. Mack Co., Inc. is a family owned business that has been in operation since 1969. We are a Tool & Die stamping house with in house Die making, EDM, CNC mill & CNC lathe capabilities. Most of our business is working with the aerospace industry. We are AS9100D certified.

Job Description We are seeking a detail-oriented and experienced Quality Control Inspector to join our aerospace manufacturing team. As a Quality Control Inspector, you will play a crucial role in ensuring that our products meet the highest quality standards. This position requires strong knowledge of FAA regulations, quality systems, and precision measuring instruments***** MUST HAVE AEROSPACE FASTENER EXPERIENCE******* ```Responsibilities``` Conduct in process and final inspections in accordance with priorities established in the manufacturing/production plan. Assures product quality and manufacturing accuracy by properly using inspection equipment. Maintains product quality documentation by keeping accurate records and files. Ensures that product conforms to standards by correctly reading blueprints and applicable specifications and effectively using inspection measuring equipment. Contributes to team effort by maintaining a positive attitude. Complies with all company policies and procedures. Able to perform open set ups for first piece inspections and validations. Performs First Article Inspections to AS9102 standards. Support non-conforming product procedures, first article inspections, source inspections, and audits. Provide support and information (including on the job training, when applicable) to departmental teammates and manufacturing and engineering personnel ```Skills & Abilities``` Ability to read and interpret customer Blueprints, drawings, specs and standards Ability to read and interpret work instructions Experience with First Article Processes and documentation Experience with quality equipment and calibration processes Strong computer and analytical skills Must be able to work effectively as part of a team Problem Solving Skills Ability to adapt and be flexible Communication Skills, both written and verbal Detail oriented Ability to organize and plan Self-directed ***** salary negotiable depending on experience******** If you are a meticulous individual with a passion for maintaining high-quality standards, we encourage you to apply for the position of Quality Control Inspector. Join our team and contribute to the success of our company by ensuring the delivery of top-notch products to our customers. Please note that only qualified candidates will be contacted for further consideration. Company DescriptionSunland Aerospace Fasteners has been dedicated to our customers success, with an exceptional commitment to excellence. We deliver manufacturing and service excellence.Company DescriptionSunland Aerospace Fasteners has been dedicated to our customers success, with an exceptional commitment to excellence. We deliver manufacturing and service excellence.

Job Description Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: Perform inspection of materials, processes and final product, per business need. Generates inspection reports according to AS9100 requirements. Enter inspection data into systems. Utilizes inspection tools including calipers, gauges and testing equipment (CMM). Reads and interprets drawings, procedures and work instructions. Identifies areas for improvement in inspection processes and coordinates implementation. Comply with all safety requirements; participate in safety training/practices. Qualifications: 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. Understanding of QA requirements, processes, practices and systems. Demonstrated ability to work in team-based environments. Ability to read engineering drawings to determine and measure features and tolerances. Strong written and verbal communication skills in English. Software experience; Excel, Word, Power Point, etc. Bilingual - English/Spanish Perks and Benefits: Desired first shift schedule Premium Health Insurance - $0 employee premium & $0 deductible Company provided life insurance for all employees with $0 employee contribution Dental 10 paid holidays 5 paid sick days Accrued vacation 401(k) Profit Sharing Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER. Job Posted by ApplicantPro

The Quality Control Receiving Inspector - Second Shift is responsible for performing inspections of incoming materials, parts, hardware, and assemblies to verify compliance with Robinson Helicopter Company's specifications, engineering drawings, and purchase order requirements. The position ensures that only conforming materials are released for production and maintenance use in accordance with FAA Part 21, Part 145, and EASA requirements. The role supports the company's commitment to safety, quality, and regulatory compliance for both production and repair station operations. Essential Duties and Responsibilities · Perform detailed receiving inspections of incoming materials, components, and hardware for conformity to engineering drawings, purchase orders, and applicable specifications. · Verify supplier documentation, including Certificates of Conformance, material test reports, and traceability records, for accuracy and compliance. · Conduct dimensional and visual inspections using calibrated measuring tools such as calipers, micrometers, height gauges, and optical comparators. · Review and validate supplier certifications and special process documentation in accordance with FAA, EASA, and AS9100 standards. · Record inspection results in the company's ERP/Quality Management System. · Identify, tag, and segregate nonconforming materials; initiate Nonconformance Reports (NCRs) when required. · Communicate with Purchasing, Engineering, and Quality Assurance to resolve supplier quality issues. · Maintain compliance with calibration control procedures and ensure inspection tools are within current calibration prior to use. · Support internal and external audits as required. · Adhere to all company policies, procedures, and safety requirements, maintaining a clean and organized work area. · Perform other related quality inspection duties as assigned by supervision. Quality Assurance Inspector positions in 2nd shift operation, receive an 8% shift premium (additional to their base pay). Qualifications Required Qualifications · High school diploma or equivalent required; technical or trade school coursework preferred. · Minimum of 2 years of experience in aerospace, helicopter, or precision manufacturing inspection. · Familiarity with EASA Part 145 and AS9100 quality management systems. · Ability to read and interpret engineering drawings, blueprints, and specifications. · Proficient with precision measuring tools and inspection methods. · Strong attention to detail and ability to accurately document inspection findings. · Proficiency in using computer-based systems for inspection entry. · Ability to work independently with minimal supervision on the second shift. · Strong verbal and written communication skills. Preferred Qualifications · Prior experience inspecting helicopter or rotorcraft components and assemblies. · Understanding of Geometric Dimensioning and Tolerancing (GD&T). · Familiarity with aerospace materials, finishes, and hardware standards (AMS, MIL, ASTM).

(**************** is in North Orange County in the city of Brea, California. Life Science Outsourcing, Inc (LSO) is a contract manufacturer of medical devices with in-built capabilities to offer clients full-service solutions through our six divisions. Clients rely on LSO to perform all activities required to introduce their products to market, from sourcing to drop shipping. We are looking for a proactive and enthusiastic Receiving QC Inspector with a good positive energy to join our team. In this role you will be responsible for ensuring that all incoming medical devices meet the necessary quality standards and comply with all applicable regulations. We encourage you to submit a resume with salary requirements. Job Description Perform incoming inspection of medical devices, including visual inspection and dimensional measurement Verify an document product compliance with regulatory and company requirements Identify and document non-conformance found during inspection Participate in investigations related to non-conformance or product quality issues Assist with the development and implementation of inspection procedures Maintain accurate and up-to-date records of inspection results Communicate effectively with team members, supervisors, and other departments as needed Qualifications To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The requirements listed below are representative of knowledge, skill and or ability required. High school diploma or equivalent Experience in quality control related field preferred Knowledge of medical devices regulations and standards preferred Ability to use measuring tools and equipment Detail-oriented with excellent organizational and communication skills Ability to work independently and as part of a team Proficient in Microsoft Office applications, Word and Excel PHYSICL DEMANDS This position requires the ability to work on your feet for extended periods of time, as well as the ability to bend, stoop and lift objects. Walk extended distances as needed. Additional Information All your information will be kept confidential according to EEO guidelines.

Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: Perform inspection of materials, processes and final product, per business need. Generates inspection reports according to AS9100 requirements. Enter inspection data into systems. Utilizes inspection tools including calipers, gauges and testing equipment (CMM). Reads and interprets drawings, procedures and work instructions. Identifies areas for improvement in inspection processes and coordinates implementation. Comply with all safety requirements; participate in safety training/practices. Qualifications: 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. Understanding of QA requirements, processes, practices and systems. Demonstrated ability to work in team-based environments. Ability to read engineering drawings to determine and measure features and tolerances. Strong written and verbal communication skills in English. Software experience; Excel, Word, Power Point, etc. Bilingual - English/Spanish Perks and Benefits: Desired first shift schedule Premium Health Insurance - $0 employee premium & $0 deductible Company provided life insurance for all employees with $0 employee contribution Dental 10 paid holidays 5 paid sick days Accrued vacation 401(k) Profit Sharing Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.