Quality inspector jobs in Savannah, GA - 46 jobs

Title: Spring Co-Op - Nondestructive Inspection (NDI) Pay Rate: $18.00/per hour. Overtime available for 40+ hour weeks Location: Multiple locations throughout the Southeast including Marietta, Charlotte, Augusta, Savannah, Mobile, Jacksonville, Shreveport and Dothan. Most of the work being performed at our clients' sites within the region with the potential for some national assignments. Travel: Hotel accommodations, per diem and milage reimbursement expenses will be available in addition to paid travel time to the clients' work sites. Schedule: The work schedule is officially part-time but will include several assignments that may be 70+ hours per 7-day work week dependent on the outage schedule and site assignments. About Us: Applied Technical Services, LLC is a leading provider of critical testing, inspection, certification, and compliance services. We serve clients across a diverse set of large and stable end markets including manufacturing, power generation, aerospace, medical, and defense. ATS was founded in 1967 and is headquartered in Marietta, GA. Today, ATS employs nearly 2,100 team members in over 95 locations across the United States. Our purpose is to create a safe and reliable world, and our mission is to deliver assurance through precise technical and professional services. Overview: As a Co-Op on the Nondestructive Inspection team at ATS, you will have the opportunity to partner with our team to support multiple projects on our clients' sites within the region. The Co-Op is going to include direct hands-on general tasks related to these specialized inspection services. Key Responsibilities: * Work with leaders and other NDI Technicians on general tasks related to the team. * Opportunity to learn and apply the industry various inspection methods and gain hands on experience. * Perform tasks as directed to prepare components or equipment for inspections. * Work alongside certified technicians to help complete projects and learn activities. * Interface with personnel to determine scope of work and work priorities to meet customer expectations. * Help clean and organize equipment before, during, and at the completion of projects. * Document on job training experience as assigned by management. * Perform other job-related tasks as assigned by supervisors. Work Conditions: * Most work will be completed in an industrial environment including, but not limited to papermills, power generation, and manufacturing facilities. * Must be able to wear safety equipment as required by the safety department for personal protection. * Work from heights on scaffolding, ladders, elevated platforms, man-baskets, etc. * Work in confined spaces which will require crawling, stooping, climbing, etc. * Work in and around operating equipment and industrial environments. * Work with radiation and hazardous materials such as cleaners, penetrants, film developing chemicals, etc. * Work shifts up to 12 hours/day and 7 days/week and travel for extended periods of time * Ability to lift and carry 100 pounds. Benefits: * Gain hands-on experience in the NDI industry. * Mentorship and coaching with industry leaders in real world settings. * Networking opportunities within the company. * Ongoing training, both hands on and in classroom, and certifications available Tuition Reimbursement: Upon the completion of one (1) designated work term, and upon returning to ATS to work, the employee will be reimbursed for tuition and books only for the previous school term. * Tuition: The employee will be reimbursed for tuition and fees specifically associated with classes (i.e., lab fees) pertaining to his/her degree for the previous school term. * Books: The employee will be reimbursed for books applicable to his/her degree and required by his/her courses for the previous school term. * Payment Scale. Based on overall semester GPA, ATS will reimburse based on the following schedule: * ≥ 3.0 100% * 2.7 to 2.99 80% * 2.5 to 2.69 60% * < 2.5 0% Payment will be made after final grades and receipts are submitted to ATS. Out-of-state tuition or lab fees or university fees will not be included in reimbursement.

Exciting Opportunities coming in October! TS Conductor is a startup company focused on reducing the carbon footprint in the world. We are looking to hire Quality Inspectors to ensure that our processes meet the required quality standards and that any defects or non-conformities are identified and corrected. Our team uses a variety of equipment to measure properties from material strength to conductivity, maintains accurate records, and communicates with other stakeholders to improve quality control procedures and processes. If you're hard-working and dedicated and believe in working for a better world, TS Conductor is an ideal place to get ahead. Responsibilities Inspecting output samples using industry-appropriate methods that include dimensional measurements, tensile strength testing, and resistivity measurements. Checking that the production line adheres to standards and procedures and complies with industry-standard requirements. Reading and interpreting blueprints and standard specifications (ASTM, ISO, internal, etc.) against produced goods. Recording inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database. Training the production team on quality control measures to improve product excellence. Contribute to root cause analysis and corrective action investigations for significant nonconformances and process anomalies. Monitoring the use of equipment to ensure it is safe and discarding any that do not meet requirements. Updating job knowledge by engaging in educational opportunities and regular training. Keeping measurement equipment operating accurately by following calibration requirements and calling for repairs. Using gauges such as calipers, micrometers, Ohm meters, and tensile testing machines to measure products. Collecting and compiling statistical quality data. Assisting in the development of test methods and inspection plans. Determining the causes of product defects and reworks. Verifying all equipment is calibrated correctly. Knowledge of ISO 9001:2015 standards. Capable to write procedure and Work instruction adhering to customer specs and ISO standards. Requirements: High school diploma or equivalent qualification. A minimum of 2 years' experience in a similar role. Physically capable and available to work overtime including weekends, public holidays, and evenings. Effective problem-solving abilities. Must be well- organized and have the ability to prioritize tasks. Deep Knowledge of destructive and nondestructive techniques Documentation and reporting skills Teamwork and collaboration Comfortable standing or walking for long periods of time Compensation: The compensation for the Quality Inspector typically ranges from an hourly rate of $22.00 to $30.00 based on experience, skills, and qualifications. Those with more experience or specialized skills may be offered a higher rate within this range. Equal Opportunity Employer: TS Conductor is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status, or other characteristics protected by law.

Quality Assurance Technician Company Profile 80 years and countless innovations later, JCB is the world's largest privately-owned manufacturer of construction and agricultural equipment. At 22 plants spanning four continents-and countries including the United States, the United Kingdom, India and Brazil-JCB manufactures a range of more than 300 products including Loadall telescopic handlers, backhoe loaders, excavators, wheel loaders, compact excavators, skid steer loaders, compact track loaders, Access aerial work platforms, rough terrain forklifts, and Fastrac tractors. JCB people are at the heart of our business and as a family-owned business we answer to our customers, not a group of shareholders. That freedom allows us to concentrate on developing the latest technologies and incorporating them into our equipment. We focus on what our customer needs on the jobsite - a machine that holds up in the toughest environment and increases their productivity. At JCB, we stand behind our products - and our name. Position Purpose The Quality Assurance Technician is involved in the entire course of manufacturing. They may inspect components before assembly, analyze trial products during development, or test finished goods. During these processes, they record and analyze the results to decide whether to certify or reject specific products. The QAT will us this data to solve production issues and recommend improvements. Other duties may include preparing inspection plans, training new technicians, repairing damaged material or products. Major Tasks, Responsibilities & Key Accountabilities Comply with all safety requirements and proper use of (PPE) Personal Protective Equipment Understand and practice company Quality Policies Perform dock audits Record inspection and test results. Communicate inspection/test results to other team members, Supervisors or Managers. Conduct repair of defects when necessary or facilitate team members making repairs. Maintain Quality Assurance Department records, both hard copy and electronic copy Report all questionable items, materials and/or processes to appropriate management for analysis and disposition Responsible individual with strong work ethic You must be able to lift 50 - 80 lbs. and stand for long periods of time. Ability to use hand tools and learn specific machine controls, gauges, etc. Ability to solve problems and recommend solutions. Ability to complete any required documentation. Nature & Scope Reports to Quality Supervisor. Minimum Qualifications Must pass any drug screens, background checks and any pre-employments tests as applicable. High school diploma Previous manufacturing experience Ability to use hand tools Preferred Qualifications Associate's degree preferred Understanding of specifications and labels of hazardous materials Knowledge, Skills, Abilities & Competencies Analytical - Collects and researches data utilizing statistical methods to improve insight and understanding. Problem Solving - Identifies and resolves problems in a timely manner; gathers and analyzes information skillfully. Looks beyond the obvious and doesn't stop at the first answers. Interpersonal - Keeps emotions under control. Is not knocked off balance by the unexpected. Verbal Communication - Practices attentive and active listening and has the patience to hear people out. Can accurately restate the opinions of others even when he/she disagrees. Responds well to questions. Written Communication - Writes clearly, succinctly, and informatively; presents numerical data effectively. Ethics - Inspires the trust of others by adhering to an appropriate and effective set of core values and beliefs regardless of circumstances. Organizational Support - Follows policies and procedures. Timeliness - Meets deadlines with timely output. Ensures work responsibilities are covered when absent. Quality - Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality. Quantity - Strives to increase productivity. Safety and Security - Adheres to safety and security procedures, reports potentially unsafe conditions to the appropriate leadership. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to: Must be able to work flexible schedule, including but not limited to 12-hour shifts/7 days a week. Must be able to regularly lift and/or move up to 10lbs, frequently and/or move up to 35lbs, and occasionally lift and/or move up to 50lbs. Must be able to perform continuous, repetitious physical activities. These activities may involve fine movements or large motions. Must be able to grasp/pinch small items, reach out and up, and turn wrist. Must be capable of keeping pace with current production speed. Must be able to push/pull with reasonable force. Must be able to perform the following requirements of bending, stooping, climbing, kneeling, and standing for extended periods of time. Must be able to work in multiple climates including hot/cold temperatures, and dusty environment. JCB is an equal employment opportunities (EEO) employer in accordance with applicable federal, state and local laws. JCB complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. EEO EMPLOYER/VET/DISABLED. JCB Inc. is not currently hiring individuals for this position who now or in the future require sponsorship for employment visa status; however, as a global company, JCB offers many job opportunities outside of the U.S. which can be found through our website at **************************************** Disclaimer: This job description is general in nature and is not designed to contain or to be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to the job.

Quality Inspector Status: Full Time, Non-Exempt Schedule: 40 Hr Seoyon E-Hwa is a leading automotive parts manufacturing company specializing in precision injection molding solutions. Dedicated to innovation and excellence, our primary focus involves offering Tier 1 manufacturing support to the automotive OEM's. As we expand our operations, we are seeking a talented Quality Inspector to join our dynamic team at the Client Site. Position Overview: We are seeking a meticulous and detail-oriented Quality Inspector to join our team at Seoyon E-HWA Manufacturing Savannah, a leading manufacturer of automotive interior parts. As a Quality Inspector, you will be responsible for ensuring that all products meet our high standards of quality, safety, and functionality. This role involves inspecting materials, in-process products, and finished goods, as well as collaborating with production teams to resolve quality issues and ensure continuous improvement. Candidates must be willing and able to perform duties at the client site as part of their responsibilities. Responsibilities Inspect automotive interior parts to ensure conformance to product specifications and quality standards. Perform both visual and dimensional inspections using tools such as calipers, micrometers, gauges, and other measuring instruments. Conduct functional testing to verify that parts meet performance requirements. Identify defects or deviations from product specifications and document findings accurately. Record inspection results, track non-conformities, and maintain detailed reports for compliance and traceability. Communicate quality issues to production staff and assist in root cause analysis and corrective actions. Ensure compliance with all relevant industry standards, customer specifications, and regulatory requirements. Assist in the development and implementation of inspection procedures and work instructions. Work closely with the production team to resolve quality concerns, improve processes, and maintain high levels of product consistency. Perform audits on raw materials and finished products to ensure consistency in quality across all production stages. Support internal and external audits as required. Participate in continuous improvement initiatives and suggest process enhancements to improve product quality. Qualifications High school diploma or equivalent; additional certification in Quality Control or Engineering is a plus. Previous experience in quality inspection, preferably in the automotive or manufacturing industry. Strong understanding of automotive interior parts and components. Proficiency with measuring instruments (calipers, micrometers, gauges, etc.). Familiarity with quality standards such as ISO 9001, TS16949, or similar. Excellent attention to detail and a keen eye for identifying defects or deviations. Strong communication skills and the ability to collaborate effectively with cross-functional teams. Ability to read and interpret technical drawings, specifications, and blueprints. Basic knowledge of statistical process control (SPC) and quality improvement techniques. Ability to work independently with minimal supervision while maintaining a team-oriented approach. Physical Requirements: Ability to stand for extended periods. Ability to lift and carry up to 25 lbs. Manual dexterity for using inspection tools and equipment. Benefits: At Seoyon E-Hwa, we believe that our success is driven by the well-being and satisfaction of our employees. We are committed to fostering a positive and inclusive workplace where every team member can thrive. Medical/Dental/Life Insurance 401k Paid Time Off Paid Holidays Seoyon Ehwa Manufacturing Savannah Inc is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

As a Quality Control Associate, you will play a critical role in ensuring that all products meet our company's high standards of quality. You will conduct inspections, perform tests, and collaborate closely with production and supply chain teams. Korean language skills are highly preferred to support communication with our Korean-speaking partners and vendors. Key Responsibilities Perform routine product inspections and quality assurance checks Document and report quality issues clearly and accurately Communicate with Korean-speaking teams and vendors to resolve quality concerns Maintain compliance with company policies and regulatory standards Participate in continuous improvement initiatives Support audits and prepare quality reports as needed Identify, document, and report non-conformities or defects Operate and maintain inspection equipment and tools Work closely with production and engineering teams to resolve quality issues Record inspection results and maintain accurate documentation Follow standard operating procedures and safety guidelines Support continuous improvement and root cause analysis efforts Pay Rate: $21/Hr Requirements Prefer Male applicants preferred for physical job requirements Basic mechanical knowledge or experience in a manufacturing or technical field Conversational proficiency in both English and Korean Able to use basic Microsoft Office tools (Excel, PowerPoint) Must be physically fit and able to work on the production floor Salary Description $21/Hr

Our client, a leader in the manufacturing industry, is seeking a Quality Control Technician (CMM Programmer) to join their team. As a Quality Control Technician, you will be part of the Quality Control department supporting various operational teams. The ideal candidate will have strong problem-solving skills, excellent communication abilities, and a results-driven mindset which will align successfully in the organization. **Job Title:** Quality Control Technician (CMM Programmer) **Location:** Richmond Hill, GA **Pay Range:** $60,632 to $80,620 Pay depending upon experience level 1-1st shift opening 2-2nd shift openings **What's the Job?** + Develop and implement systems to ensure products meet or exceed customer requirements. + Perform CMM programming for all parts requiring measurement using the CMM machine. + Train quality control operators on the correct setup and operation of CMM machines. + Participate in cross-functional teams with other departments and engineering disciplines. + Apply problem-solving methodologies to identify and resolve quality issues. **What's Needed?** + High school diploma or equivalent. + 1+ years of experience in quality control in manufacturing or CMM Programming. + Strong understanding of GD&T (Geometric Dimensioning and Tolerancing). + Proficiency with Microsoft Word, Excel, and PowerPoint. + Excellent written and verbal communication skills. **What's in it for me?** + Opportunity to work in a dynamic and supportive environment. + Chance to develop your skills and advance your career in quality control. + Engage in continuous improvement initiatives. + Be part of a team that values collaboration and innovation. + Contribute to the success of high-quality manufacturing processes. **Upon completion of waiting period associates are eligible for:** + Medical and Prescription Drug Plans + Dental Plan + Supplemental Life Insurance + Short Term Disability Insurance + 401(k) If this is a role that interests you and you'd like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! **About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells** _ManpowerGroup (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands -_ **_Manpower, Experis, Talent Solutions, and Jefferson Wells_** _-_ creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent. ManpowerGroup is committed to providing equal employment opportunities in a professional, high quality work environment. It is the policy of ManpowerGroup and all of its subsidiaries to recruit, train, promote, transfer, pay and take all employment actions without regard to an employee's race, color, national origin, ancestry, sex, sexual orientation, gender identity, genetic information, religion, age, disability, protected veteran status, or any other basis protected by applicable law.

Reporting to the site Quality Lead, the Quality Technician's primary responsibility is to identify, analyze and report on materials, processes and products to ensure they meet customers' quality standards and to ensure corrective action is implemented effectively to improve company performance. This is a 8 hour per day/ Monday - Friday day shift. What You'll Do: Ensure outgoing finished products meet quality standards through Quality Assurance inspection and audit process. Record inspection and audit data. Understand Process Control and perform Layer Process Audit. Preform Incoming Material Inspection. Facilitate, clarify and educate quality standards to production personnel. Ensure rework materials meet customer specifications. Investigate and work with DIRTT employees to reduce/eliminate defects & institute corrective actions. Perform measuring equipment calibration. Assist in investigation and analysis of customer reported quality issues and root cause identification. Represent and promote our customer's expectations with regard to quality within our facility. Other duties as assigned. What You Bring to the Role: The ideal candidate will have at least 4 years of manufacturing experience with a minimum of 2-year experience in a Quality related role. Post-secondary education in management, engineering or manufacturing would be beneficial. Knowledge of ISO 9001 Quality Management System. Excellent communication skill, both verbal and written. Highly self-motivated and organized. Able to work without supervision. Computer literate, capable of working with MS office. Flexibility on work schedules to meet company's requirements. What's in it for you: An on-site cafeteria with coffee, soft drinks, continental breakfast, hot lunches, snacks, and more. Eligibility to participate in DIRTT's Employee Share Purchase Plan. Fulsome employer-paid health benefits including health, dental, and vision coverage. Short-term and long-term disability coverage plus life, critical illness, and accidental death and dismemberment (AD&D) insurance. Mental health resources including an Employee Assistance Program (EAP). Opportunity for growth! This is a safety sensitive position: pre-employment background & drug screening will be required; you must be 18 years old or older to apply. DIRTT Environmental Solutions is an equal opportunity employer and appreciates applications from all interested applicants. We thank all applicants for their interest, however, only those candidates selected for an interview will be contacted.

QC Inspect II Company: Gulfstream Aerospace Corporation QC Inspect II in GAC Savannah Unique Skills: PQ stamp required. will be for outside processing inspector. At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the worlds finest aviation experience starts with our people and when our people thrive, so does our mission. Education and Experience Requirements High School Diploma or GED required. 3 years quality inspection experience required. 5 years manufacturing experience or equivalent aerospace experience preferred.. Other Formal Inspection Training Program 90 Days required. Position Purpose: In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, or Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data. Job Description Principle Duties and Responsibilities: Essential Functions: * Perform inspection duties utilizing engineering drawings and orders, work instructions, technical specifications, QA procedures and instructions, and other related documents. * Perform preliminary and progressive inspections of aircraft structure and systems, verify functional operation, final inspections, inspect for FOD and verify paperwork. Witness, verify and document specified manufacturing process steps. * Perform conformity/first article inspections to ensure compliance with FAA approved procedures. * Perform transfer and consolidated inspections. * Ensure the proper use and storage of area tools and equipment. * Conduct work in a manner that enhances own/other employees health and safety, product safety and promotes risk reduction; participate openly in safety-related event investigations, and immediately report workplace hazards and make suggestions for control; cooperate and contribute toward the overall success of the Safety program at the local level. Additional Functions: * Provide on the job training for subordinate level inspectors. . * Coordinate inspection workload according to priorities, efficiency and cost effectiveness. . * Provide technical support to manufacturing, engineering and IPT personnel. . * Perform duties of MRB signature authority. . * Perform area inspections to ensure compliance with applicable standards and specifications. . * Lead continuous improvement activities. . Perform other duties as assigned. Other Requirements: * Proficient in GAC CATIA or blueprint reading and interpretation, GAC work instructions, technical specifications and GAC QA Manual. * Competent in the use of all job related tools and equipment. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 230166 Category: Quality Assurance Percentage of Travel: Up to 25% Shift: Multiple Shifts Employment Type: Full-time Posting End Date: 01/30/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Savannah Job Segment: QA, Quality Assurance, Inspector, QC, Quality, Technology, Aviation

QC Inspect II in GAC Savannah Unique Skills: PQ stamp required. will be for outside processing inspector. At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission. Education and Experience Requirements High School Diploma or GED required. 3 years quality inspection experience required. 5 years manufacturing experience or equivalent aerospace experience preferred.. Other Formal Inspection Training Program 90 Days required. Position Purpose: In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, or Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data. Job Description Principle Duties and Responsibilities: Essential Functions: * Perform inspection duties utilizing engineering drawings and orders, work instructions, technical specifications, QA procedures and instructions, and other related documents. * Perform preliminary and progressive inspections of aircraft structure and systems, verify functional operation, final inspections, inspect for FOD and verify paperwork. Witness, verify and document specified manufacturing process steps. * Perform conformity/first article inspections to ensure compliance with FAA approved procedures. * Perform transfer and consolidated inspections. * Ensure the proper use and storage of area tools and equipment. * Conduct work in a manner that enhances own/other employees health and safety, product safety and promotes risk reduction; participate openly in safety-related event investigations, and immediately report workplace hazards and make suggestions for control; cooperate and contribute toward the overall success of the Safety program at the local level. Additional Functions: * Provide on the job training for subordinate level inspectors. . * Coordinate inspection workload according to priorities, efficiency and cost effectiveness. . * Provide technical support to manufacturing, engineering and IPT personnel. . * Perform duties of MRB signature authority. . * Perform area inspections to ensure compliance with applicable standards and specifications. . * Lead continuous improvement activities. . Perform other duties as assigned. Other Requirements: * Proficient in GAC CATIA or blueprint reading and interpretation, GAC work instructions, technical specifications and GAC QA Manual. * Competent in the use of all job related tools and equipment. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 230166 Category: Quality Assurance Percentage of Travel: Up to 25% Shift: Multiple Shifts Employment Type: Full-time Posting End Date: 01/30/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Savannah

Our growing Industrial Division is a multi-disciplined industrial construction group self-performing Concrete, Electrical, Structural, Pipe, and Deep Foundation scopes in industrial process facilities. Since 1945, Morgan Corp has developed into one of the largest diversified heavy construction companies in the Southeast. The Industrial Division is based in our Spartanburg office and performs work throughout the Southeast. Our Industrial Division services include: * Structural Concrete * Electrical - duct banks/raceways, power/control cabling, MCC/Switchgear installation, control systems, and grounding * Piping - utility/process piping * Lifting and Rigging * Geostructural - support of excavation, retaining structures, and deep foundations * Concrete Repair - spall repairs, shotcreting, crack injection and chemical grouting. About the Role We believe that a quality construction project is critical to our success. The Quality Control Inspector role varies from project to project based on the scopes being performed, but may include the following: * Reviewing the project plans and specifications to identify: * The code of construction. * Required regulatory, owner, and Morgan inspection items. * Required documentation and record keeping. * Required training, qualification, certifications, and licensing to successfully implement the project. * Research and understand construction codes to communicate and develop construction strategies with the project team to meet the needs of the project. * Work with the project team to develop a Project Specific Inspection and Test Plan that will be incorporated into the project schedule to aid in the planning of the work, as well as document the inspections. * Manage Quality activities with the project team, owner, and inspectors. * Work with the project team to coordinate the necessary third-party, owner, or jurisdictional inspections. * Complete the Inspection and Test Plan and generate the necessary turnover packages to satisfy internal and owner requirements. What We're Looking For * A minimum of 5 years of experience managing QA/QC efforts in Industrial Construction. * A strong grasp of many of the codes and standards we deal with such as ASME, ACI, NECA, ASTM, etc. * The ability to research codes and standards and work with the project team to develop work plans and ITP's that will satisfy the requirements of the project. * A willingness to work with a team and as well as independently. * Willingness to travel. * Willingness to work outside in various types of environmental conditions or in operating process facilities. * Strong computer skills and familiarity with Word and Excel. * Strong Organizational and time management skills. * Strong attention to detail. What We Offer * Comprehensive medical, dental, and vision health coverage * Competitive compensation and retirement benefits (401k w/company match) * PTO (including holiday pay PLUS a week-long "winter shutdown") * Professional development & training * Career advancement For additional company information, please visit us at ******************* Equal Opportunity Employer, including disabled and veterans. View Company Information To see other positions, click here.

The Quality Control Checker is responsible for the accurate checking or counting of all products for both inbound and outbound freight. Available Shift: Monday - Friday, 4pm-12:30am. Weekends as needed. Responsibilities * Ensures that the quantity, quality and labeling and addressing of outbound orders. * Reports shortages, damages and mis-shipments. * Checks contents of orders as filled and assembled by Order Selectors. * Compare the quantity, quality, labeling and address with customer order to ensure outgoing shipments are complete and correct. Qualifications * At least 2 year experience in similar position * Computer applications experience using MS Office * Excellent oral and written communications skills * Excellent analytical and mathematical skills * Excellent customer service skills * Able to work independently * High school education or equivalent * Must be able to lift and/or pull 50 lbs without restriction * Performs duties as instructed by management * Ability and availability to work irregular or extended hours including nights, weekends and holidays as needed * Must be able to stand and walk for continuous periods of time Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) LA County Applicants: The Company will consider qualified applicants, including those with criminal histories, in a manner consistent with applicable state and local laws. Profit Center PC-91037

Help us build the future and we'll help you build a rewarding and purposeful career. Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal. Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you unlimited space to grow. Who are we looking for? Our Geotechnical team in Hilton Head, SC & Savannah, GA is looking for a CMT Technician to perform field observation, inspection, testing, and sampling of soil, aggregates, concrete, grout, masonry, and asphalt pavement. You'll document findings in line with engineering best practices and building codes-helping ensure quality and compliance from the ground up. Join our Geotechnical Services Group and play a key role in construction and site development projects across the region! Responsibilities * Improvement/Innovation: Accept changes at work and provide support when asked. * Health, Safety, and Environment: Follow a range of mandatory work instructions (including use of personal protection equipment where relevant) to safeguard the environment and the well-being of self and others. * Performance Management: Complete allocated work to the required standards of quality and timeliness; use performance management systems to improve personal performance. What you will bring to the team: * High school diploma or GED certificate * Experience in field testing of soils, aggregate, concrete, asphalt, and masonry preferred but training will be provided on the job * Certification in at least one of the following is preferred: ACI, NICET, ICC, SCDOT * Good mechanical aptitude and troubleshooting abilities preferred * Able and willing to travel and work outdoors at job sites #LI-JK1 As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

Reporting to the site Quality Lead, the Quality Technician's primary responsibility is to identify, analyze and report on materials, processes and products to ensure they meet customers' quality standards and to ensure corrective action is implemented effectively to improve company performance. This is a 8 hour per day/ Monday - Friday day shift. What You'll Do: * Ensure outgoing finished products meet quality standards through Quality Assurance inspection and audit process. * Record inspection and audit data. * Understand Process Control and perform Layer Process Audit. * Preform Incoming Material Inspection. * Facilitate, clarify and educate quality standards to production personnel. * Ensure rework materials meet customer specifications. * Investigate and work with DIRTT employees to reduce/eliminate defects & institute corrective actions. * Perform measuring equipment calibration. * Assist in investigation and analysis of customer reported quality issues and root cause identification. * Represent and promote our customer's expectations with regard to quality within our facility. * Other duties as assigned. What You Bring to the Role: * The ideal candidate will have at least 4 years of manufacturing experience with a minimum of 2-year experience in a Quality related role. * Post-secondary education in management, engineering or manufacturing would be beneficial. * Knowledge of ISO 9001 Quality Management System. * Excellent communication skill, both verbal and written. * Highly self-motivated and organized. * Able to work without supervision. * Computer literate, capable of working with MS office. * Flexibility on work schedules to meet company's requirements. What's in it for you: * An on-site cafeteria with coffee, soft drinks, continental breakfast, hot lunches, snacks, and more. * Eligibility to participate in DIRTT's Employee Share Purchase Plan. * Fulsome employer-paid health benefits including health, dental, and vision coverage. * Short-term and long-term disability coverage plus life, critical illness, and accidental death and dismemberment (AD&D) insurance. * Mental health resources including an Employee Assistance Program (EAP). * Opportunity for growth! This is a safety sensitive position: pre-employment background & drug screening will be required; you must be 18 years old or older to apply. DIRTT Environmental Solutions is an equal opportunity employer and appreciates applications from all interested applicants. We thank all applicants for their interest, however, only those candidates selected for an interview will be contacted.

Blythe Construction has lead development in North and South Carolina for over 90 years since our company's founding in 1921. In that time, our many generations of employees have completed thousands of contracts, from large highways to small commercial site development. Our company's history is one of continued evolution and growth. Beginning as a small independent asphalt development company, Blythe expanded its resources and influence through significant mergers throughout many years, eventually becoming part of the Vinci USA network extending from as far north as Maine to as far west as Texas. Description The Quality Control Asphalt Mix Design Technician will work under the direction of the Quality Control Manager in the formulation and implementation of asphalt mix designs/job mix formulas at the asphalt plants. Key Duties * Follow the directions and instructions of the Quality Control Manager. * Conduct sampling and testing in accordance with applicable SCDOT, AASHTO, and ASTM standards. * Perform daily equipment verifications as instructed by the Quality Control Manager. * Perform or assist in performing all necessary equipment calibrations as directed by the Quality Control Manager. * Testing of samples in accordance with applicable specifications, QC Plan and Quality Management System requirements. * Care and maintenance of all laboratory equipment and inventory. * Keeping the laboratory in a neat, clean and orderly fashion. * Accurate reporting of test results on their proper forms. * Completion of all documentation used to report test results (i.e. - worksheets, sample and test logs, Certificate of Analysis, etc.). * Disposal of waste material upon completion of testing. * Assist plant personnel during batch production as necessary to insure product quality control objectives are met (process control testing). * Communicating batch test results and certifications to plant personnel * Assist the Quality Control Manager in meeting compliance reporting requirements timelines as outlined in the QC plans and Quality Management System. * Assist other technicians and employees as needed * Attend and complete training as required (company, certification, etc.). * Other activities as assigned by the quality control manager Qualification Requirements * General. To perform this job successfully, an individual must be able to perform each Key Duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Education and Experience. This position typically is not an entry-level job, as it requires demonstrable previous experience as a Quality Control Asphalt Lab Technician and experience with formulating asphalt mix designs/job mix formulas. * SCDOT HMA Level 2 Job Mix Technician certification. * Working proficiency in Microsoft Excel, Word and Outlook. * Familiarity with SCDOT, AASHTO, and ASTM specifications for asphalt emulsions, asphalt materials and testing. * Possess a working understanding of statistical process control. * Ethical professional and behavioral standards. * Physical Demands. The following physical demands are representative of those that must be met by a Laboratory Technician to successfully perform the essential functions of this job. * Constant physical effort, including standing, is required during a regular work shift of at least eight hours per day. * Frequently walk on uneven surfaces, including natural ground in varying weather conditions. * Work Environment. The work environment characteristics described below are representative of those that a Laboratory Technician encounters while performing the essential functions of this job. * Work is performed predominantly indoors. * Work environment periodically exposes the employees to high levels of noise, grease, and dust that is typically associated with a construction project. Company Benefits: * Company Paid Basic Life Insurance * Company Paid Long Term Disability Policy * Company Paid Vacation & Holiday Pay * Company Paid Parental Leave * Company Paid Maternity Leave * Company Paid Employee/Family Assistance Program (EAP) * Voluntary Medical & Vision Insurance * Voluntary Dental Insurance * Voluntary Short Term Disability * Voluntary Supplemental Term Life * Voluntary Accident, Legal, Hospital, Critical Illness Policies * 401(k) Plan w/Employer Match * Annual Company Stock Purchase Opportunities * Discount Partnerships: Verizon, Ford, Perkspot * Health and Wellness Benefits, including Monthly Gym/Fitness Incentives We promote a Drug-Free Workplace. EOE AA M/F/Vet/Disability are encouraged to apply. Blythe Construction, Inc. - Hubbard Construction Company - Northeast Paving - Sunmount Paving - Virginia Paving Company, are hereby referred to as Vinci Construction USAAccessibility: If you need an accommodation as part of the employment process please contact Human Resources at Blythe Construction, Inc.: Phone: ************Hubbard Construction Company: Phone: ************Eurovia Atlantic Coast, LLC:Phone: ************ Vinci Construction USA is an Equal Opportunity Employer.Vinci Construction USA is committed to providing a fair and equal employment opportunity workplace. All hiring and promotional decisions are made without regard to race, color, religion, sex (including pregnancy), genetic information, gender identity, sexual orientation, national origin, age, disability, veteran status, or any other status that is protected by federal, state, or local law. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language:

Help us build the future and we'll help you build a rewarding and purposeful career. Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal. Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you unlimited space to grow. Who are we looking for? Our Geotechnical team in Hilton Head, SC & Savannah, GA is looking for a CMT Technician to perform field observation, inspection, testing, and sampling of soil, aggregates, concrete, grout, masonry, and asphalt pavement. You'll document findings in line with engineering best practices and building codes-helping ensure quality and compliance from the ground up. Join our Geotechnical Services Group and play a key role in construction and site development projects across the region! Responsibilities Improvement/Innovation: Accept changes at work and provide support when asked. Health, Safety, and Environment: Follow a range of mandatory work instructions (including use of personal protection equipment where relevant) to safeguard the environment and the well-being of self and others. Performance Management: Complete allocated work to the required standards of quality and timeliness; use performance management systems to improve personal performance. What you will bring to the team: High school diploma or GED certificate Experience in field testing of soils, aggregate, concrete, asphalt, and masonry preferred but training will be provided on the job Certification in at least one of the following is preferred: ACI, NICET, ICC, SCDOT Good mechanical aptitude and troubleshooting abilities preferred Able and willing to travel and work outdoors at job sites #LI-JK1 As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

Job Description Bunnell-Lammons Engineering, Inc. is seeking to hire a full-time Geotechnical / Construction Materials Testing Technician to visit our solid waste construction sites throughout the southeast to ensure soil, geosynthetics, and concrete are meeting construction standards. This engineering technician position earns a competitive salary, depending on experience and certification and generous benefits. The company provides in-house training, mentorship, a vehicle, and all necessary safety equipment. In addition, allowances for travel living expenses are provided for out-of-town work. Our benefits include medical, dental, vision, life insurance, and a 401(k) option. Our team works hard. We recognize their dedication through 5 year, 10 year, and 15 year service awards. Additionally, we provide fun activities, including Christmas parties, employee appreciation lunches, and more! If this sounds like the opportunity that you've been looking for, apply today! ABOUT BUNNELL-LAMMONS ENGINEERING, INC. We are a geotechnical and environmental consulting firm providing efficient and cost-effective solutions for our clients, resulting in long-term relationships. We service commercial, financial, industrial, municipal, construction, and architectural design engineering clients across the southeast. Our highly qualified staff eagerly turns tough challenges into finished projects. Drawing on the power of combined expertise, we're big believers in teamwork. And, we recognize that achieving our goals and building our legacy requires both hard work and creativity. When you work here, we encourage you to see just what you can achieve as part of a great, family-oriented team. A DAY IN THE LIFE OF A GEOTECHNICAL / CONSTRUCTION MATERIALS TESTING TECHNICIAN Working under the immediate supervision of a registered professional engineer, you work as a team member alongside site managers, general contractors, and engineers to perform the required inspection or sampling services at various environmentally regulated solid waste landfill construction projects. You monitor general contractor activities, onsite testing, and reporting of earthwork and soil construction as well as geosynthetic baseliner, closure cap, piping, and gas extraction systems. In addition, you actively collect concrete, soil, and other site materials for testing in order to ensure construction standards and specifications are being met. Being safety conscious is at the heart of all you do. As part of BLE's valuable team of engineering technicians, you are proud to be in the construction field providing quality assurance and doing your part to maintain professional and personable client-company relationships. TECHNICIAN QUALIFICATIONS Relevant education and experience Schedule flexibility Ability to work out of town for several weeks at a time Can navigate smartphones and computers for communication and recording time worked Ability to comfortably lift 50 lbs walk on slopes and perform the physical requirements of the position Efficiently work with hand tools and testing apparatuses Able to pass a drug screening Have a valid driver's license and clean driving record Enjoy working outdoors in all types of weather conditions ACI, NICET, and ICC Certifications are a plus! Are you a team player who can work under minimal supervision? Do you have great communication skills, both written and verbal? Do you thrive working outside on construction sites? Are you eager to be mentored by a professional engineer? If so, you may be perfect for this position! GEOTECHNICAL / CONSTRUCTION MATERIALS TESTING TECHNICIAN WORK SCHEDULE Work schedule can vary depending upon the time of year but typically follows normal construction daylight hours. As a Geotechnical / Construction Materials Testing Technician, schedule flexibility is preferred. ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this engineering technician job, please fill out our initial 3-minute, mobile-friendly application so that we can review your information. We look forward to meeting you! Job Posted by ApplicantPro

Full-time Description We are seeking a detail-oriented Quality Inspector to join our team in Ellabell, Ga. As a Quality Inspector, you will be responsible for ensuring that all products meet our high standards of quality, safety, and functionality. This role involves inspecting materials, in-process products, and finished goods, as well as collaborating with production teams to resolve quality issues and ensure continuous improvement. Responsibilities Inspect automotive interior parts to ensure conformance to product specifications and quality standards. Conduct functional testing to verify that parts meet performance requirements. Identify defects or deviations from product specifications and document findings accurately. Work closely with the production team to resolve quality concerns, improve processes, and maintain high levels of product consistency. Requirements Ability to stand for extended periods. Ability to lift and carry up to 25 lbs. Use of inspection tools and equipment. Strong understanding of automotive interior parts and components. Strong communication skills and the ability to collaborate effectively with cross-functional teams. Ability to work independently with minimal supervision while maintaining a team-oriented approach. Salary Description 16.50/Hr

Job Description Quality Inspector Status: Full Time, Non-Exempt Schedule: 40 Hr Seoyon E-Hwa is a leading automotive parts manufacturing company specializing in precision injection molding solutions. Dedicated to innovation and excellence, our primary focus involves offering Tier 1 manufacturing support to the automotive OEM's. As we expand our operations, we are seeking a talented Quality Inspector to join our dynamic team at the Client Site. Position Overview: We are seeking a meticulous and detail-oriented Quality Inspector to join our team at Seoyon E-HWA Manufacturing Savannah, a leading manufacturer of automotive interior parts. As a Quality Inspector, you will be responsible for ensuring that all products meet our high standards of quality, safety, and functionality. This role involves inspecting materials, in-process products, and finished goods, as well as collaborating with production teams to resolve quality issues and ensure continuous improvement. Candidates must be willing and able to perform duties at the client site as part of their responsibilities. Responsibilities Inspect automotive interior parts to ensure conformance to product specifications and quality standards. Perform both visual and dimensional inspections using tools such as calipers, micrometers, gauges, and other measuring instruments. Conduct functional testing to verify that parts meet performance requirements. Identify defects or deviations from product specifications and document findings accurately. Record inspection results, track non-conformities, and maintain detailed reports for compliance and traceability. Communicate quality issues to production staff and assist in root cause analysis and corrective actions. Ensure compliance with all relevant industry standards, customer specifications, and regulatory requirements. Assist in the development and implementation of inspection procedures and work instructions. Work closely with the production team to resolve quality concerns, improve processes, and maintain high levels of product consistency. Perform audits on raw materials and finished products to ensure consistency in quality across all production stages. Support internal and external audits as required. Participate in continuous improvement initiatives and suggest process enhancements to improve product quality. Qualifications High school diploma or equivalent; additional certification in Quality Control or Engineering is a plus. Previous experience in quality inspection, preferably in the automotive or manufacturing industry. Strong understanding of automotive interior parts and components. Proficiency with measuring instruments (calipers, micrometers, gauges, etc.). Familiarity with quality standards such as ISO 9001, TS16949, or similar. Excellent attention to detail and a keen eye for identifying defects or deviations. Strong communication skills and the ability to collaborate effectively with cross-functional teams. Ability to read and interpret technical drawings, specifications, and blueprints. Basic knowledge of statistical process control (SPC) and quality improvement techniques. Ability to work independently with minimal supervision while maintaining a team-oriented approach. Physical Requirements: Ability to stand for extended periods. Ability to lift and carry up to 25 lbs. Manual dexterity for using inspection tools and equipment. Benefits: At Seoyon E-Hwa, we believe that our success is driven by the well-being and satisfaction of our employees. We are committed to fostering a positive and inclusive workplace where every team member can thrive. Medical/Dental/Life Insurance 401k Paid Time Off Paid Holidays Seoyon Ehwa Manufacturing Savannah Inc is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Help us build the future and we'll help you build a rewarding and purposeful career. Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal. Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you unlimited space to grow. Who are we looking for? Our Geotechnical team in Hilton Head, SC & Savannah, GA is looking for a CMT Technician to perform field observation, inspection, testing, and sampling of soil, aggregates, concrete, grout, masonry, and asphalt pavement. You'll document findings in line with engineering best practices and building codes-helping ensure quality and compliance from the ground up. Join our Geotechnical Services Group and play a key role in construction and site development projects across the region! Responsibilities Improvement/Innovation: Accept changes at work and provide support when asked. Health, Safety, and Environment: Follow a range of mandatory work instructions (including use of personal protection equipment where relevant) to safeguard the environment and the well-being of self and others. Performance Management: Complete allocated work to the required standards of quality and timeliness; use performance management systems to improve personal performance. What you will bring to the team: High school diploma or GED certificate Experience in field testing of soils, aggregate, concrete, asphalt, and masonry preferred but training will be provided on the job Certification in at least one of the following is preferred: ACI, NICET, ICC, SCDOT Good mechanical aptitude and troubleshooting abilities preferred Able and willing to travel and work outdoors at job sites #LI-JK1 As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.