Quality inspector jobs in Southampton, NY - 114 jobs

JOB TITLE: Quality Control Inspector JOB CODE: Quality Control REPORTS TO: Quality Assurance Manager. Direct on-site project direction and daily scheduling provided through continuous communication with the applicable IMIA Project Manager and/or Supervisor. PAY RANGE: $32.00/hour- $42.00/hour based on experience Summary of position: Responsible for monitoring quality control/assurance requirements of all preservation preformed onboard commercial and US Navy vessel in accordance with established Navy regulations and industry standards or specific contractual requirements as defined in the Scope of Work. Collaborate with customer QA personnel on necessary aspects of the job. Essential Job Requirements: Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Required Education: High School diploma or equivalent Required Certification: NACE Inspector and/or SSPC NBPI required. Required Experience: Formal or informal on-the-job training in the marine industry; familiarity with Navy and Society for Protective Coatings standards. Required Skills: Must possess knowledge of Maritime paintings standards with particular emphasis in US Navy ship preservation criterion. Word processing, spreadsheet, email, and database computer skills required. Must be able to accomplish mathematical calculations associated with preservation readings and documentation; must be able to discern and carry out complex written, oral, or diagramed instructions. Must be able to take direction; interact professionally, knowledgeably and cooperatively with supervisors and co-workers and customer representatives. Physical Requirements: Must be physically capable of working an 8-10 hour day requires average use of computer, some physical dexterity, and agility within confined and restricted spaces & tanks. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Supervisory Responsibilities: None Working Conditions: Regularly stand for long periods of time; work on scaffolds and ladders; work on top of machinery; work in confined spaces. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees. Overtime or shift work involved. Travel often required. Must follow strict safety procedures.

Rodelco Electronics, a small fast-growing business located in Ronkonkoma NY that serves the military electronics markets, has an opening for a Quality Inspection. In this position the individual will be responsible perform inspections of complex, close tolerance machined parts and sub-assemblies with critical internal and external dimensions and the ability perform visual inspection under a microscope. Inspection of final assembly items to customer/internal source control drawings also required. Must have the ability to understand customer quality control requirements as called out in purchase orders and contracts and use this ability to interface with customer source inspectors for customer final inspection. Essential Job Functions: Complete understanding of engineering drawings, standards and manufacturing operation sheets for detailed parts, subassemblies and final assemblies including: Working knowledge of conventional inspection equipment, (micrometers, calipers etc.) Generate inputs for non-conforming material reports based on inspection operations performed Use of standard record keeping documentation Able to create reports and summary of the inspection reports. Communicate and work effectively with various groups of employees in a team-based environment. US Citizenship required Quality Requirements: Inspect products for incoming inspection for verification of acceptability utilizing AQL requirements. Ensure proper inspections have been performed to ensure product quality. Verifies specified dimensions of product or material when required for customer complaints, engineering evaluation and/or material review board requests. Familiar with J-STD-001 soldering and IPC-A-610 workmanship standards. Fulfill and adhere to quality standards, inspection processes, quality plans, documents, and reports. Proficient in interpreting engineering drawings Training and Experience: Minimum 5 years experience in mechanical and electronic assembly and inspection The understanding of assembly drawings, specifications, charts, tables, etc. Rodelco's Benefits: PTO Holiday Pay 401K with company match Profit Sharing Health Insurance Additional Voluntary Benefits Salary Range: $27.00 - $33.00 Hour

Position Type: Full Time, 40h/week FLSA Classification: Non-Exempt : Roto Frank of America, Inc. is looking for a Maintenance & Quality Technician-2nd Shift to join our team in Chester, CT. Roto North America is a subsidiary of Roto Window and Door Technology, a global leader in window and door hardware, with 18 production plants and more than 30 subsidiaries worldwide. Through its 2 companies, Roto Frank of America, Inc. and Roto Fasco Canada, Inc., Roto North America has been manufacturing and offering a variety of leading North American and European window and door hardware products in the USA and Canada. To learn more about Roto Frank of America please visit us at: Welcome - Roto North America Summary: We are looking for an enthusiastic and passionate individual to join our 2nd shift maintenance and QC team in Chester, CT. The Maintenance and Quality Control Technician will be accountable for the general maintenance and repairs for assigned equipment and be responsible for the quality of produced parts. This position is full time, on site in Chester, CT 3:30pm through 12:00am. There may be occasional overtime as required by business needs. Essential Functions: All aspects of maintenance of the assembly lines and quality control. Inspects and identifies equipment or machines in need of repair. Perform advanced troubleshooting to determine necessary repairs. Order supplies and materials needed for repairs and maintenance. Perform PM (preventative maintenance) on all assembly equipment. Basic milling and lathe work. Ability to use hand tools and power tools. Basic tool repair (grinding, polishing, etc.). Knowledge of general carpentry and repair. Use a pallet jack/forklift. Read and understand engineering drawings (dimensioning and tolerancing). Perform tests according to company quality standards; report results to supervisor for analysis and action steps. Consult with supervisor to determine appropriate recommendations and remedies for questionable products. Perform critical dimension checks on incoming products and raw materials. Use calipers, metric tape, and other measuring devices to determine fine color distinctions. Perform visual quality inspection of incoming finished products. Perform first-piece inspections and checks as noted on production sheets. Create NMRs and control rejected material. Provide support to receiving by identifying material as needed. Computer data entry using SAP system. General housekeeping. Observe all safety requirements. Must wear safety equipment as required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Required Skills & Competencies: Demonstrated ability to offer sound and relevant input, and to contribute and defend ideas during meetings and discussions. Excellent organizational & time management skills. Assumes responsibility without supervision, self-motivated, and proactive. Ability to follow instructions from supervisors Quality focus along with first piece/last piece expertise Work Environment: Production environment work and physical position. Work requires sitting, standing, and/or walking for long periods, moving and examining objects at high and low reach. Must be physically able to climb ladders, bend or crawl into awkward spaces. Able to drive forklift. Dexterity and accuracy needed to operate testing equipment or gauges. Hand-eye coordination. Must be able to lift up to 50 pounds at a time. Minimum Required Education: High School diploma or equivalent required On-the-job training offered Valid Driver License Required Required Work Experience: Related experience of 2 years preferred Roto offers an attractive salary and benefits package: 401(k) 401(k) matching Employee assistance program Employee discount program Medical insurance Dental insurance Vision insurance Flexible spending account Health savings account Life insurance Short Term Disability insurance Voluntary Long Term Disability insurance Paid time off Paid Holidays Pay Range: The Pay Range for this position is $27.00 - 29.00 hourly. The actual pay range will depend on varying circumstances and individualized factors, such as job-related knowledge, skills, experience, and other objective business considerations. The pay range listed here has been provided to comply with local regulations and represents a potential pay range for this role.

Quality Inspector 1 - Non-exempt Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. We looking for an Aerospace Quality Inspector to perform 1st piece, in-process and final inspection on aircraft engine components for compliance with engineering drawings, customer requirements and company specifications before or after manufacturing processes. This will also include performing inspection procedures including checking dimensions of related surfaces, holes, etc., as well as assessment of finish and detection of undesirable nonconformances. Location: Cheshire, CT Reports to: Quality Supervisor/Manager Essential Duties & Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform. Obtains blueprints and company specification sheet for the item and particular order. Must be capable of reviewing internal operation sheets against customer blueprints. Determines inspection procedure to ensure complete verification of specifications and dimensions. Obtains necessary fixtures, gauges, and indicators to check parts for compliance with specifications, within prescribed tolerances. Completes certain assurance checklists during the process. Performs dimensional checks of parts while in the machine when necessary. Rejects unacceptable items, documents nonconformance, and moves part to quality clinic. Completes required company paperwork on machined parts inspection activity. Ability to read and understand work instructions such as Op Sheets, Engine Manuals, Customer Purchase Order Requirements, etc. Ability use measuring instruments such as a micrometer, caliper, swing gage, etc. Accurate documentation of all inspections (Ex: Receiving, In-Process, Final) and ability to work with operators to ensure all requirements are met. Communicates with co-workers, colleagues and Supervisors to receive instructions and/or guidance and coordinate activities. Organize and maintain inspection department, gaging methods, etc. Work independently and efficiently to meet customer requirements. Willingness to work with shop personnel to induct incoming parts and aid in the expeditious shipment of critical parts Ability to read and comprehend instructions, short correspondence, and memos. Adaptability to different inspection methods Adhere to standards of safety and housekeeping as established Performs other related duties or responsibilities as requested or required, whether or not specifically mentioned in this job description. Participate in training as required 5-10% Domestic Travel required Requirements: Must be a “U.S. Person” as defined by US Government and able to work without restriction with ITAR related data. High school diploma or general education degree (GED) required 1+ years experience as an aerospace part inspector; or equivalent combination of education and experience. Ability to use measuring instruments such as a micrometer, caliper, swing gage, etc. Knowledge of blueprint reading and machinery limitations. Ability to read and comprehend simple instructions, short correspondence, and memos. Must have visual acuity enough to be able to read machine dials, gages, Op sheets and precision measuring equipment. Must be able to read, write, understand, and speak English at a functional level. AAP Statement Hanwha Aerospace USA Corporation, is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. Subject to change with or without notice

JOB DESCRIPTION: The Receiving Quality Inspector shall be responsible for the following: Performing receiving inspection of raw material, hardware and consumable items Review of supplier-provided quality documentation (certificates, test results, etc.) Performance of mechanical inspection of purchased machined parts using hand-held measuring devices Performance of form, fit, function inspection of outside processed parts to design drawings/mylars of sheet metal parts Performance of hardness and continuity testing of outside processed heat treated parts Completion of inspection reports on company-provided formats Data entry in the organization's ERP system - Global Shop Assisting other inspectors in fulfillment of their job duties, as required Performance of any and all tasks in support of the organization's Quality Management System - as assigned by the Director of Quality or his designee

Job DescriptionWe are seeking a Quality Inspector to join our growing team! Established in 1977, we're currently a small job shop operating in an AS9100 certified environment. Our focus is precision machined products and the individual we seek will serve a key role within the company. Ideal candidate will have a solid understanding of GD&T with experience setting up and utilizing various measuring instruments such as; bore gauges, micrometers, calipers, dial indicators, e.t.c.. Responsibilities: Layout and perform first piece inspections Participate in routine mechanical inspections and receiving inspections Prepare First Article Inspection Reports per AS9102 Qualifications: Previous work experience in quality control or other related fields Strong attention to detail Strong analytical and critical thinking skills, strong mathematical skills are necessary. Excellent written and verbal communication skills Proficient with Microsoft Office. Bonus Qualifications: CMM experience is preferred Perform Calibration and maintain records Knowledge of Quality Management System in an AS9100 environment Pay varies significantly DOE Benefits include Health Care, Retirement, PTO

Job Description Required Qualifications: High School Diploma or equivalent - Required Quality Inspection Experience (2 to 4 years) Strongly Preferred High attention to detail and consistency Experience with basic measuring equipment such as calipers or micrometers and other common inspection tools Experience reading and interpreting blueprints and specifications Experience in a smaller production environment Some experience with Visual Measuring Systems desired Responsibilities: Scope: Our Quality Inspectors compare measurements, form, fit, function, and value judgments of simple and complex parts to blueprint specifications and general workmanship standards using documents, experience, and knowledge of inspection techniques of Saint-Gobain/American Seal & Engineering Co. The Quality Inspector is responsible for ensuring Good Documentation Practices are utilized throughout all quality records that are reviewed/completed/inspected/audited. Essential Functions: Inspect manufactured product for dimensional consistency, workmanship and finish. Maintains the flow of product through inspection in a timely manner meeting due dates for outside processes and customer deliveries. Inspects incoming materials for conformance to requirements, reviews certifications for conformance, issues DMR or NCMR in our ERP system if needed. Performs In-process inspection. Reviews certification packages for product and releases for shipment in ERP system. Files electronic data on server and maintains accurate and orderly certification files in QA. Assists the lead Inspector and department manager as needed. Other tasks as assigned. Comments/Special Instructions: Ideal candidate will have previous experience in a fast-paced manufacturing environment.

The Quality Inspector will be responsible for performing inspections and ensuring compliance with quality standards for machined components and assemblies. This role requires strong knowledge of machining processes, precision measurement tools, and quality procedures to maintain product integrity and customer satisfaction. Key Responsibilities Perform in-process and final inspections on machined parts and assemblies. Verify dimensions using precision measuring instruments (calipers, micrometers, gauges, shadow graph). Interpret engineering drawings, blueprints, and specifications. Document inspection results and maintain accurate records in accordance with company procedures. Identify and report non-conformances; assist in root cause analysis and corrective actions. Ensure compliance with ISO 9001 and internal quality standards. Collaborate with production and engineering teams to resolve quality issues. Qualifications High school diploma or equivalent; technical certification preferred. Minimum 3 years of experience in quality inspection within a machining/manufacturing environment. Strong understanding of machining processes and tolerances. Proficient in the use of precision measuring tools and equipment. Ability to read and interpret technical drawings and GD&T. Familiarity with quality systems and documentation practices. Excellent attention to detail and problem-solving skills. Physical Requirements and Work Environment Ability to stand for extended periods, lift up to 25 lbs, and work in a manufacturing environment with exposure to noise and machinery. #LI-KP1

Introduction The mission of the New Haven Health Department is to ensure and advocate for the health and well-being of all New Haven residents. The Bureau of Environmental Health maintains as its principal goal the preservation and protection of the environmental quality of the City of New Haven. Work includes: Utilize and enforce applicable sections of the State Public Health Code, State Statutes, and Municipal Ordinances Resolve cases of childhood lead poisoning; provide educational outreach activities and assist with distribution of federal lead abatement funds to prevent lead poisoning. Investigate and resolve public health nuisances and infractions of applicable statutes and/or ordinances Assist in preparing for and responding to public health emergencies Lead is a poisonous substance found in most homes in New Haven, especially those built before 1978. In fact, over 80% of New Haven homes are likely to contain lead. When exposed to lead, children or adults can have permanent and severe health problems. PRIMARY FUNCTIONS This is a technical position under the general supervision of the Environmental Health Program Director or designee in the Department of Health to perform investigations, education, and outreach for the prevention of childhood lead poisoning. Work includes inspections for the purpose of determining the presence of lead-based paint and surface coverings and lead in soil, dust and drinking water. Work is performed within the framework of existing laws, ordinances, policies, and regulations. TYPICAL DUTIES AND RESPONSIBILITIES Inspects buildings and dwellings for possible sources of lead poisoning. Conducts investigations, following established protocols, of home environments of children exhibiting the symptoms of blood-lead poisoning. Performs inspections using special instruments to identify surfaces containing lead paint. Collects samples of paint, dust, water, and soil from dwellings and delivers samples to laboratory. Document findings accurately and take photographs or videos, as necessary. Follows procedures to ensure abatement of all areas containing lead paint which may pose a direct hazard to the health of a child. Reinspects dwellings after completion of repairs to ensure compliance with regulations. Confers with individual property owners relevant to service of notices and violations. Fosters a cooperative working relationship with other city and state agencies. Records test data and prepares reports, summaries, or charts that interpret test results. Prepares reports, analyses and recommendations concerning inspection duties and outcomes. May conduct special surveys relating to general environmental health disciplines. May assist in coordinating duties with other concerned agencies. Develops and implements lead abatement plans for properties with confirmed lead hazards, including coordinating with property owners, contractors, and other stakeholders. Assists with providing educational workshops and outreach activities to raise awareness about lead poisoning prevention and provide information on available resources for lead abatement. Performs related work as required. EDUCATION, QUALIFICATIONS & EXPERIENCE Graduation from an accredited four-year college or university with a Bachelors' degree in Public Health, Environmental Science, Occupational Health and Safety, or directly related field, and A minimum of one (1) year of hands-on experience in environmental health inspection and enforcement, Or any equivalent combination of training and experience which provides the following knowledge, abilities and skills: KNOWLEDGE, EXPERIENCE, SKILLS & ABILITIES Considerable knowledge of policies, procedures, methods, and industry standards relating to environmental health. Considerable knowledge of lead poisoning, its effects on children, and long-term health implications. Knowledge of lead hazard identification, assessment, and effective abatement strategies. Considerable knowledge of current issues, research findings, and regulatory decisions regarding childhood lead poisoning. Demonstrated ability to conduct thorough investigations of buildings and dwellings to identify hazards. Competency in utilizing specialized instruments to test for surfaces containing lead paint. Excellent record-keeping skills, including accurate documentation of inspection findings, supported by other media as needed. Ability to prepare detailed written reports, summaries, analyses, recommendations, and charts that interpret test results. Ability to assist with development and implementation of effective lead abatement plans for properties with confirmed lead hazards. Ability to coordinate abatement efforts, including liaising with property owners, contractors, and relevant stakeholders. Strong interpersonal skills for conducting educational workshops and outreach activities aimed at raising awareness about lead poisoning prevention. Ability to use standard Microsoft Office with adeptness and ease, with the ability to learn new emerging technologies. Ability to effectively communicate with co-workers, other City agencies, the public, property owners, and other stakeholders. Ability to remain current on relevant literature, training, research findings, and industry advancements in the field of environmental health. Commitment to ongoing professional development, including attendance at conferences, workshops, and training sessions to stay updated on advancements in lead inspection and abatement techniques. Proven ability to work collaboratively with other city and state agencies involved in environmental health and lead abatement efforts. Ability for self-driven initiative, coupled with strong time management and organizational skills, enabling efficient and independent execution of tasks and responsibilities. Demonstrated ability to work effectively and sensitively in a diverse community, recognizing and respecting cultural differences, and fostering an inclusive environment conducive to achieving common environmental health goals. NECESSARY SPECIAL REQUIREMENTS Must obtain State of Connecticut Lead Inspector Certification within 6 months of appointment, and maintain throughout course of employment (Certification training sponsored by the City). Must obtain State of Connecticut Lead Risk Assessor Certification within 6 months of appointment, and maintain throughout course of employment (Certification training sponsored by the City). Must possess and maintain a valid driver's license throughout the course of employment. This position is aligned with current Core Competencies for Public Health Professionals published by the Council of Linkages between Academia and Public Health Practice. Analytical/Assessment Skills · Working knowledge of assessing individual and community health needs. · Ability to collect reliable data and analyze. Policy Development/Program Planning Skills · Ability to plan, implement and evaluate health education strategies, interventions and programs. · Demonstrate the ability to evaluate the effectiveness of all prevention and promotion programs and outreach efforts. · Good knowledge of the complexity of Connecticut State / City of New Haven laws and regulations, monitor them for changes and have the ability to independently adapt to changes. Communication Skills · Good working knowledge of the appropriate use of technology in health prevention and promotion and ability to independently adapt to the fast-changing landscape of technology. Cultural Competency · Ability to learn about and work with all cultures, ethnicity, social economic statuses being respectful and non-judgmental. Community Dimensions of Practice Skills · Ability to facilitate/coordinate community stakeholder groups. · Ability to present, understand and relay all points of view on issues. Public Health Sciences Skills · Good knowledge of the principles, practices and terminology of public health and chronic disease epidemiology. · Good knowledge of disease prevention and health promotion programs. · Working knowledge of communicable diseases, diagnoses, spread containment and treatment options. Financial Planning and Management Skills · Basic understanding of budgets Leadership and systems Thinking Skills · Demonstrate leadership and management skills. · Ability to independently manage projects while providing supervisory / oversight to diverse groups of community members. SALARY, BARGAINING UNIT & TERMS OF EMPLOYMENT This is a "General Fund," tested position. This position is included in a collective bargaining agreement with Local 884, American Federation of State, County and Municipal Employees. Bargaining agreements available to review HERE. General Funded hires into this class shall not be covered by Social Security but rather the City pension, contributing 9% of salary. The City of New Haven does not sponsor employment visas. All applicants must have current authorization to work in the U.S. without employer-sponsored visa support. Employment is contingent upon the successful completion of: (1) an pre-employment background check, (2) a pre-employment physical examination, including pre-employment drug screening accordance with the City's Drug Free Workplace Policy**, and (3) a 90-day probationary period. Instructions and information on this pre-employment process are included in Conditional Offer of Employment. **Pursuant to the Federal Drug Free Workplace Act of 1988, The City of New Haven has a adopted a Drug Free Workplace Policy. The City of New Haven requires a pre-employment drug test, which includes screening for marijuana. Selection Plan Applications will be reviewed by the Department of Human Resources. Applicants must demonstrate within their submission that they meet the minimum requirements as listed within the job description; failure to do so may result in disqualification. Applicants meeting minimum requirements may be invited to participate in a Civil Service exam process at a later date. It is critical that you complete the application thoroughly, as the information you provide will be used to ascertain if you are eligible to move forward in the selection process. Your application and resume should indicate that you meet the minimum requirements as listed. This information may be used to determine the eligibility list. As such, this job announcement should be considered the exam announcement, and submissions may be evaluated prior to the posted closing date. Information regarding the employment and selection process can be found HERE. Please note that the only method of communication with applicants for this position will be by email. You must provide a valid, working email address and you will need to monitor your email, including spam/junk folders, for correspondence from the New Haven Human Resources Department. We reserve the right to extend an application deadline or close a job posting early to ensure we can attract and identify the best candidate(s) for a position. Conclusion To apply for this opportunity: Complete your User Registration. You are encouraged to save your Applicant Profile for future use. You MUST click on the job posting you are interested in, and click Apply or Apply Online from within that posting. MAKE SURE the job you are applying for is named at the top of the page as you review your application! Review or modify your application for that position Click "Ready to Send App" or the "Send" tab; read page and click the attestation Click "Send to City of New Haven" You will be redirected to "CONFIRMATION OF EMPLOYMENT APPLICATION SUBMISSION" You will also receive an email and text, if a number was provided, confirming your submission If you do not receive this confirmation in the next 24 hours, your application has not been submitted - please contact us at ********************* Please Note, your Profile is NOT an application for an open position. After you create your Applicant Profile, you must still click on a Job Title and complete the application as instructed for each position.

Principal Responsibilities Capable of reading and understanding complex drawings. Ability to use a variety of complex inspection gages and equipment. Performs visual and dimensional inspection of various mechanical components and assemblies to close tolerances. Identifies defects in surface, dimensional, visual and non-conformities (material, documentation and workmanship) to blue prints and Heim quality standards. Reports non-conformance of materials or unusual conditions to Quality management. Familiarity with Quality System(s) - ISO 9001, AS9100, etc. Coordinates and performs inspection processes and accepts product as a Designated Supplier Quality Representative for customers. Interacts with customers during source inspection. Completes paperwork. Reviews and interprets customer specifications. Maintains and updates delegation/regulatory documentation. Verifies material and process certifications for compliance with customer/regulatory requirements. Passes customer required Delegation Program Tests to achieve and maintain delegation approval. Inspects and accepts product under the FAA: PMA/TSO program as a Designated Manufacturing Inspection Representative. Prepares and signs FAA Airworthiness Approval Tags. Initiates and completes Fist Article Inspection Reports and other relevant quality reports. Maintains records, data and logs as necessary. Investigates and analyzes Quality issues and brings departments together to resolve problems. Provides written documentation and reports. Follows work procedures. Provides support to achieve short-term and long-term department / company goals. Provides leadership/training as needed. Ensures that production schedules and customer requirements are met. Maintains clean and safe work environment. Follows safety and environmental procedures and regulations. Reports safety incidents to supervisor. Makes recommendations for improvements to work processes and procedures. Contributes to 6 S programs in work area. Provides a high level of service to all internal and external customers. Contributes to positive teamwork environment. Performs other duties as assigned. Participates in training/learning other positions. Accomplishes related results as needed. Qualifications An AS degree in Industrial Technology or equivalent work experience of 6-8 years in a manufacturing environment, preferably in an aerospace manufacturing environment. “A” level Inspector or equivalent experience is required or any combination of knowledge, skill and experience to the satisfaction of the manager. Knowledge, Skills and Abilities Analytical Thinking Attention to Detail, thoroughness and accuracy Blueprint Reading Inspection Mechanical Ability Measurement and Test Equipment Communication (Speaking, Questioning, Listening) Computer (Word, Excel, Access) Customer focus Decision Making Dependability Initiative Interpreting Customer Requirements Organization Problem Solving Results Oriented Team Oriented Writing, documentation Knowledge Essential to the Position Customer requirements Inspection Techniques - Read and Interpret specifications Other: Travel: 25% Requires Certificates / Licenses: Customer Requirements / Quality Delegation Programs FAA

Open Scientific provides contract staffing and direct hire recruitment services for the scientific, engineering, laboratory and manufacturing sectors. Job Description Quality Inspector A large labeling company is looking for Quality Inspectors. The labeling company works with large companies nationwide to provide labels for their products. The Quality Inspectors ensure the overall excellence of products or goods manufactured. They are the “last line of defense” to ensure the product is in excellent condition for the customers. Successful people in this role has great attention to detail. This is perfect for someone looking for long term work and growth. Requirements: · 1 - 2 years' experience in related field · Knowledge of FDA/cGMP guidelines · Basic writing and math skills · Strong verbal communication skills · Fluent in English, Spanish a plus · Must be able to stand on feet all day Location: Hauppauge Pay Rate: $12-$15 per hour 1st and 2nd shift available Benefits: Sick days, Vacation, 401k, Medical, Dental and much more Additional Information All your information will be kept confidential according to EEO guidelines.

Quality Inspector - Precision Parts | Direct Hire $17-$30 per hour, based on experience Love working with precision? Here's your chance to put your skills to the test! We're hiring a Quality Inspector to ensure every part meets exact standards. If you thrive on accuracy, this role is for you. What You'll Do: Inspect incoming, in-process, and finished metal parts Work with tight tolerances and detailed specifications Read and interpret blueprints / GD&T Play a key role in delivering top-quality products What You Bring: Hands-on inspection experience with close tolerances Strong GD&T and blueprint reading skills Stable work history in quality/manufacturing Aerospace background = big plus! Why You'll Love It: Direct hire opportunity Competitive pay: $17-$30/hr DOE Join a team that values precision and craftsmanship Your attention to detail could be exactly what we're looking for. Apply today and take your quality control career to the next level! A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws.

Job DescriptionQuality Inspector - Precision Parts | Direct Hire $17-$30 per hour, based on experience Love working with precision? Here's your chance to put your skills to the test! We're hiring a Quality Inspector to ensure every part meets exact standards. If you thrive on accuracy, this role is for you. What You'll Do: Inspect incoming, in-process, and finished metal parts Work with tight tolerances and detailed specifications Read and interpret blueprints / GD&T Play a key role in delivering top-quality products What You Bring: Hands-on inspection experience with close tolerances Strong GD&T and blueprint reading skills Stable work history in quality/manufacturing Aerospace background = big plus! Why You'll Love It: Direct hire opportunity Competitive pay: $17-$30/hr DOE Join a team that values precision and craftsmanship Your attention to detail could be exactly what we're looking for. Apply today and take your quality control career to the next level! A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws.

Insight Global is seeking a skilled Quality Control Inspector for a full-time direct hire opportunity with a Bio-Medical Device client located in Guilford, CT. The company is a long-standing family founded and led business known for manufacturing high quality, reliable, American-made repiratory care equipment. This position would work on a small team reporting to the Quality Engineer. The goal of this position to understand all processes related to quality and inspection, perform precise and reliable quality inspections, and grow with the company. Training will be hands on and tailored to the individual but previous experience with a variety of precision measuring tools will ensure a quicker ramp up for success. Responsibilities: - Perform detailed quality controlk inspections, checks and tests for receipt and manufacturing of products - Inspect material, parts and products at different stages of production, including incoming, in-process and final of machined, molded and fabricated components - Verify parts and measurements against drawings and blueprints, ensuring specifications and tolerances are met using precision measuring tools (calipers, micrometers, CMM, guages, etc) - Inspect subassemblies and finished devices for workmanship and conformance to requirements - Document inspection results accurately and in compliance with company procedures - Coordinate with vendors as needed to initiate debit memos, returns, and request RMAs - Assist team members with troubleshooting as needed We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements - 3-5+ years of experience in a Quality Inspector or similar role - Proficient with a variety of measurement tools including dial calipers, thread ring and plug guages, guage pins, height guages, micrometers, coordinate measuring machine (CMM), optical comparators and/or other inspection equipment - Experience measuring parts against blueprints or mechanical drawings - Reliable and detail oriented - Computer literate with MS Office - High School Diploma or GED Physical Requirements: - Able to use small fixtures - Able to lift up to 50 lbs and raise to a hight of 30" - Able to sit in a stationary position for prolonged periods of time - Experience with CMM (Coordinate Measuring Machine) highly preferred - Industry experience within medical devices or similar - Experience with ERP or QMS Systems - Technical training or Associates Degree in mechanical, manufacturing, or quality discipline - Understanding of ISO 13485, FDA QSR or other regulatory requirements and quality systems

Hourly : 22.72 What do you get when you bring together a team of bright individuals and place them into an environment where “work” means making a difference in the lives of people across the globe? You get Sciolex Corporation, a fast-growing defense contractor focused on providing the U.S. Government a level of service that surpasses the epitome of excellence. Our core services include systems engineering technical advice, technical support, and administrative assistance. From our humble beginning as a small Service Disabled, Veteran Owned Small Business in Chantilly, VA, Sciolex Corporation is now the home for over 1,000 employees across the U.S. Over the past 19 years, Sciolex Corporation has constructed an environment that celebrates diversity and encourages a positive work/life balance, all while supporting government missions that our employees are proud to be a part of. When you work for Sciolex Corporation, you are working for a stable company that values you and is committed to ensuring you receive the utmost employee care. Responsibilities The Quality Control Inspector (QCI) supports the overall mission of the U.S. Citizenship and Immigration Services (USCIS) by facilitating the operations of a local Field Office. As a QCI, your responsibilities would include: Verifies compliance with work standards, SOPs, ROH, and other requirements documents, Pays particular attention to the timeliness and accuracy of work performed, Screens documents to determine accuracy of data contained in them and determines which need corrective action, Keeps various logs and uses random sampling to evaluate process efficiency, accuracy, and timeliness, Responsible for recognizing problems that might invalidate samples, investigating complaints, reviewing violations found by USCIS personnel, and preparing reports of findings and actions needed or taken, Recommends changes that will improve contract performance, Other duties as assigned. Qualifications & Physical Requirements High school diploma or equivalent Must be able to obtain a Public Trust/Suitability Clearance under the Department of Homeland Security from the United States Citizenship and Immigration Services Ability to read and understand proficiently in English Ability to lift and carry up to 45 lbs. or more in a physical environment Ability to perform tasks while bending, stooping, climbing, and reaching At Sciolex Corporation, our top priorities and most valuable resources are our employees, which is why we offer a competitive total compensation package. We are a proud Equal Opportunity Employer (EOE) who celebrates diversity in and out of our organization. Come see where your opportunities for success can flourish. NOTICE: Sciolex Corporation NEVER asks job applicants to issue any payment, service fees, or banking information to Sciolex Corporation or its recruiters as part of our application process. Before providing any personal information to outside parties, verify that the job you are applying for appears on our Careers site.

Job Title: Quality Technician III Salary: $ Depending on experience Hours: 7:00 AM - 3:30 PM Duration: Direct Hire and Special DutiesThis position requires a minimum of 7 years of advanced inspection experience, including detailed layouts, setups, and visual inspections. Responsibilities include performing inspections for receiving, first article, first piece, in-process, final, and non-routine inspection activities on components (e.g., parts, sub-assemblies, finished goods, tooling, gages, fixtures, etc.). Additional duties may be assigned as required.Compensation & Benefits Competitive pay Medical, dental, and vision insurance Paid vacation Excusable allowance hours 401(k) retirement plan Education & Experience Requirements High school diploma or technical school equivalent with emphasis in mathematics ASQ CQT certification preferred Calibration experience preferred Experience inspecting high-precision, tight-tolerance parts in industries such as: Aerospace (ISO 9001/AS9100) Automotive (IATF 16949) Medical Device (ISO 13485) Military/Government Familiarity with both low- and high-volume production environments Compliance & Citizenship Requirements Must be a U.S. Citizen or U.S. Permanent Resident Green Card holder (ITAR compliance required) Skills & ResponsibilitiesCandidates must demonstrate proficiency in the following areas: Blueprint reading and GD&T interpretation (e.g., true position, profile of a line/surface) Interpretation of customer blueprints, material specs, and MIL-SPECs Understanding of the PPAP process Programming and operation of Vision Systems and CMMs (Starrett preferred) Proficient use of inspection tools including: Micrometers, calipers, indicators, comparators, gage pins Hardness testers, concentricity gages Surface plate setups using height gages, sine plates, v-blocks, etc. Development of inspection instructions and method setup sheets Maintenance of quality records and documentation Mentoring of Level I and II Inspectors Anticipating inspection needs, taking initiative, and escalating issues appropriately Communicating inspection deviations and generating nonconformance reports Supporting lean initiatives and continuous improvement efforts Maintaining safety, environmental, housekeeping, and documentation standards Company OverviewFounded in 2010, Top Prospect Group focuses on matching high-quality candidates with top clients while fostering an environment where success is shared by all. In 2023, the company was acquired by HW Staffing Solutions, expanding its service offerings to include technology and professional services. Qualified candidates are encouraged to apply immediately! Please include a clean copy of your resume, salary expectations, and any references in your application. #INDTPGSHELTON

Position Type: Full Time, 40h/week FLSA Classification: Non-Exempt : Roto Frank of America, Inc. is looking for a Maintenance & Quality Technician-2nd Shift to join our team in Chester, CT. Roto North America is a subsidiary of Roto Window and Door Technology, a global leader in window and door hardware, with 18 production plants and more than 30 subsidiaries worldwide. Through its 2 companies, Roto Frank of America, Inc. and Roto Fasco Canada, Inc., Roto North America has been manufacturing and offering a variety of leading North American and European window and door hardware products in the USA and Canada. To learn more about Roto Frank of America please visit us at: Welcome - Roto North America Summary: We are looking for an enthusiastic and passionate individual to join our 2nd shift maintenance and QC team in Chester, CT. The Maintenance and Quality Control Technician will be accountable for the general maintenance and repairs for assigned equipment and be responsible for the quality of produced parts. This position is full time, on site in Chester, CT 3:30pm through 12:00am. There may be occasional overtime as required by business needs. Essential Functions: All aspects of maintenance of the assembly lines and quality control. Inspects and identifies equipment or machines in need of repair. Perform advanced troubleshooting to determine necessary repairs. Order supplies and materials needed for repairs and maintenance. Perform PM (preventative maintenance) on all assembly equipment. Basic milling and lathe work. Ability to use hand tools and power tools. Basic tool repair (grinding, polishing, etc.). Knowledge of general carpentry and repair. Use a pallet jack/forklift. Read and understand engineering drawings (dimensioning and tolerancing). Perform tests according to company quality standards; report results to supervisor for analysis and action steps. Consult with supervisor to determine appropriate recommendations and remedies for questionable products. Perform critical dimension checks on incoming products and raw materials. Use calipers, metric tape, and other measuring devices to determine fine color distinctions. Perform visual quality inspection of incoming finished products. Perform first-piece inspections and checks as noted on production sheets. Create NMRs and control rejected material. Provide support to receiving by identifying material as needed. Computer data entry using SAP system. General housekeeping. Observe all safety requirements. Must wear safety equipment as required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Required Skills & Competencies: Demonstrated ability to offer sound and relevant input, and to contribute and defend ideas during meetings and discussions. Excellent organizational & time management skills. Assumes responsibility without supervision, self-motivated, and proactive. Ability to follow instructions from supervisors Quality focus along with first piece/last piece expertise Work Environment: Production environment work and physical position. Work requires sitting, standing, and/or walking for long periods, moving and examining objects at high and low reach. Must be physically able to climb ladders, bend or crawl into awkward spaces. Able to drive forklift. Dexterity and accuracy needed to operate testing equipment or gauges. Hand-eye coordination. Must be able to lift up to 50 pounds at a time. Minimum Required Education: High School diploma or equivalent required On-the-job training offered Valid Driver License Required Required Work Experience: Related experience of 2 years preferred Roto offers an attractive salary and benefits package: 401(k) 401(k) matching Employee assistance program Employee discount program Medical insurance Dental insurance Vision insurance Flexible spending account Health savings account Life insurance Short Term Disability insurance Voluntary Long Term Disability insurance Paid time off Paid Holidays Pay Range: The Pay Range for this position is $27.00 - 29.00 hourly. The actual pay range will depend on varying circumstances and individualized factors, such as job-related knowledge, skills, experience, and other objective business considerations. The pay range listed here has been provided to comply with local regulations and represents a potential pay range for this role.

Job DescriptionQuality Control Inspector (Manufacturing - Rubber Products) A well-established rubber manufacturing company in the Middletown area is seeking an experienced Quality Control Inspector to join their team on 1st shift. This is a contract-to-hire opportunity for someone who enjoys hands-on inspection work and takes pride in maintaining high-quality manufacturing standards. Pay Rate: $20 - $22/hour (based on experience) 1st shift, contract to hire What You'll Do Perform in-process and final inspections of rubber parts and finished products Conduct visual and dimensional inspections using calipers, micrometers, gauges, and other hand tools Ensure products meet quality standards, specifications, and customer requirements Identify, document, and report defects and nonconforming material Work closely with production teams to address and resolve quality issues Complete inspection records and basic quality documentation Support continuous improvement, safety, and housekeeping standards on the manufacturing floor What We're Looking For 2+ years of Quality Control or Inspection experience in a manufacturing environment Experience inspecting rubber, plastics, molded, or similar manufactured products preferred Ability to read and understand specifications, work instructions, or drawings Comfortable using measuring tools such as calipers, micrometers, and gauges Strong attention to detail and consistency Basic computer skills for documentation Dependable attendance and a positive, team-oriented attitude Nice to Have (Not Required) Experience with ISO or internal quality systems Familiarity with defect analysis or root cause identification Background in rubber manufacturing, molding, or extrusion Why This Opportunity? 1st shift schedule with steady hours Contract-to-hire potential Hands-on role where quality truly matters Competitive pay based on experience How to ApplyIf you have quality inspection experience and are looking for a long-term opportunity in manufacturing, apply today. Qualified candidates will be contacted to discuss next steps. A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws. #R1

Quality Control Inspector (Manufacturing - Rubber Products) A well-established rubber manufacturing company in the Middletown area is seeking an experienced Quality Control Inspector to join their team on 1st shift. This is a contract-to-hire opportunity for someone who enjoys hands-on inspection work and takes pride in maintaining high-quality manufacturing standards. Pay Rate: $20 - $22/hour (based on experience) 1st shift, contract to hire What You'll Do Perform in-process and final inspections of rubber parts and finished products Conduct visual and dimensional inspections using calipers, micrometers, gauges, and other hand tools Ensure products meet quality standards, specifications, and customer requirements Identify, document, and report defects and nonconforming material Work closely with production teams to address and resolve quality issues Complete inspection records and basic quality documentation Support continuous improvement, safety, and housekeeping standards on the manufacturing floor What We're Looking For 2+ years of Quality Control or Inspection experience in a manufacturing environment Experience inspecting rubber, plastics, molded, or similar manufactured products preferred Ability to read and understand specifications, work instructions, or drawings Comfortable using measuring tools such as calipers, micrometers, and gauges Strong attention to detail and consistency Basic computer skills for documentation Dependable attendance and a positive, team-oriented attitude Nice to Have (Not Required) Experience with ISO or internal quality systems Familiarity with defect analysis or root cause identification Background in rubber manufacturing, molding, or extrusion Why This Opportunity? 1st shift schedule with steady hours Contract-to-hire potential Hands-on role where quality truly matters Competitive pay based on experience How to ApplyIf you have quality inspection experience and are looking for a long-term opportunity in manufacturing, apply today. Qualified candidates will be contacted to discuss next steps. A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws. #R1