Quality inspector jobs in Sugar Land, TX - 252 jobs

IRISNDT is currently seeking a NACE CIP Level 1 and Level 2 Inspectors for a full time, call out positions. The Coating Inspectors shall possess knowledge and skills relating to the application of protective coatings to pipelines, fabricated piping, and storage tanks. The inspector should be familiar with and have experience in applying protective coatings, operating lest equipment, monitoring the application of the coatings, and enforcing company, industry and manufacturers specifications. The inspector must be familiar with safety standards applicable to coating applications as set forth in OSHA Construction Industry Standards. Primary Functions: • Performs assigned routine tests on materials, services in process, or finished projects where results are compared with company quality standards. Reports results to supervisor who will make an analysis and take necessary action. • Inspects visually for obvious defects. • Performs detailed visual inspection when necessary to determine quality of prodcut/service where limits are not clearly defined. Identifies defective work and helps put corrective actions in place. • Records results on inspection forms or charts and reports number of defects found. Posts and maintains forms and charts of inspection data, quality levels, or special quality studies. • May act as quality control department clerk, maintaining all quality records for facility. • Verifies that all materials used in the performance of the job assignment are in compliance with Client Company requirements. • Cooperates and works closely with the Repair/Cut-Out Welding Inspector, NDT and Contractor's Representative to assure that no repairs or cutouts are coated and lowered-in. • Assures that all specifications and safety standards are adhered to. • Records and reports material usage and waste. Qualification & Skill Requirements: High School Diploma or equivalent is required Minimum of two (2) years of experience in the application or inspection of coating in the petroleum or chemical industries, or One (1) year experience in the application or inspection of coating and either NACE CIP level 1 certification or SSPC PC1 level 1 certification. Current NACE CIP Level 1 or Level 2 certification required API 510/570 certifications considered an asset Valid TWIC card required Valid Driver's License and pre-access drug and alcohol testing required Pre-employment background checks will be required Please note: API 1169 Certification is required for all Inspectors by January 1, 2019. Physical Requirements: Move, carry, and lift objects 50 lbs. or more. Must be able to walk, stand, bend, reach, and climb. Must be able to work indoors and outdoors in all weather conditions. Benefits: Dental Insurance. Vision Insurance. Health Insurance. Paid Time Off. 401(K) W/Matching. Flexible Spending Account. Health Savings Account. About IRISNDT: IRISNDT is a tech-enabled value-adding service provider of Non-destructive Testing (NDT), Advanced NDT, Inspection, Asset Integrity Engineering, Software, and Specialized Mechanical Services to the chemical and petrochemical, refining, renewables, power, mining and other diverse end markets in the USA, Canada, the United Kingdom, and Australia. Join IRISNDT to build a promising career. Our dynamic environment offers advanced technology and ongoing learning, placing you at the forefront of industry innovation. We prioritize a strong safety culture and invest in our team, promoting a family-friendly workplace and internal career advancement. With IRISNDT, elevate your career where progress and excellence converge. We boast a team of over 2,000 dedicated staff members worldwide, our growth has been driven by seasoned management, robust technical expertise, and an unwavering commitment to exceeding customer expectations. For more information, visit our website at **************** NOTE: To be considered, applicants must be able provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification.

About the job QC inspector QC inspectors must possess computer skills and be bilingual. (Pipe Yard) Responsibilities include inspecting incoming and outgoing materials, conducting cycle counts, and maintaining an updated inventory system. Loading and unloading tasks are also required. Qualification: Must have relevant experience. Package Details

1. Perform in-process and final inspections on fabricated parts, weldments, assemblies, and structural components. 2. Verify dimensions using calipers, micrometers, gauges, tapes, weld gauges, and other precision measuring tools, prepare reports. 3. Review and interpret engineering drawings, welding symbols, fabrication standards, and customer specifications. 4. Review NDE reports, prepare ncr when necessary. 5. Ensure products meet quality standards, customer requirements, and regulatory codes. QUALIFICATIONS: 1. High school education or equivalent. 2. Ability to use appropriate measuring and test equipment. 3. Product familiarity working in a similar environment. TRAINING REQUIRED: 1. Strong attention to detail, accuracy and problem solving skills. Ability to read and interpret engineering drawings and specifications. 2. Performing dimensional inspections. 3. Experience with NDT methods. (VT, MT, PT) 4. Experience working with ITPs, MTRs and fabrication quality documentation PPE AND SAFETY: 1. Follow all shop safety policies, including PPE requirements. 2. Reasonable accommodations are made to enable

Main Purpose: The Instrumentation and Electrical (I&E) Quality Control Inspector is responsible for ensuring all integrated components, assemblies and finished shelter, rack and enclosure packages meet Englobal quality standards, customer specifications and applicable codes and regulations related to instrumentation and electrical systems and functionality. Some fabrication inspection is expected, related to quality of build. This role works closely with I&E production, engineering and project management to identify issues early, maintain documentation and drive continuous improvement across the shop floor. Essential Functions: Own and maintain Englobal Quality Management Systems including continually working with operations to improve production quality while improving schedule Address customer feedback and complaints, acting as a key contact for quality-related inquiries Develop and execute comprehensive test plans for system walk-downs, final inspections and startup sequences Interact routinely with Purchasing, Engineering, Sales and other stakeholders to proactively improve the quality of components and completed assemblies Analyze operational capabilities, develop and maintain quality performance metrics Perform Quality System audits and provide support for areas in need of continuous improvement Partner with the Engineering department to review (and correct) all shop fabrication drawings before they are released to the floor Manage and execute all pre and customer witnessed Factory Acceptance Testing activities Travel occasionally, approximately 5-10% Identify potential conflicts, deviations or non-compliance issues during the fabrication and integration phases and develop corrective action plans Lead internal and external audits to ensure adherence to federal, state and local codes, as well as project-specific specifications Perform other duties assigned by supervisor Benefits Offered: Earned Wage Access Health, Dental and Vision Insurance 401(k) with Company Match Paid Holidays Paid Vacation Life Insurance Disability Insurance Safety Awards Company Store Employee Assistance Program (EAP) Requirements Physical Requirements: Standing, sitting, walking, stooping, kneeling, climbing, feeling, talking, hearing and seeing Turning, twisting, bending, and balancing Pushing, pulling and reaching Must be able to lift and / or move up to 25 pounds and occasionally 50-75 pounds Job Requirements: 5+ years of experience in instrumentation and electrical quality inspection Must have overall work process knowledge to support the development and maintenance of the quality management system Must have problem solving skills to apply methods for Root Cause Analysis (RCA). Understanding of Design Failure Mode Effect Analysis (DFMEA) and Process Failure Mode Effect Analysis (PFMEA) Knowledge of supplier manufacturing processes and required error proofing and other quality systems as needed to provide flawless quality Knowledge of regulatory requirements (National Electrical Code (NEC), National Fire Protection Association (NFPA), Atmosphères Explosibles (ATEX), Internation Electrotechnical Commission System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres (IECEx), International Organization for Standardization (ISO), American Petroleum Institute (API) etc.) Knowledgeable in inspection processes - incoming inspection, material & equipment verification and marking requirements and in-process inspection reporting Must be meticulous about capturing and retaining information Must have basic computer skills (Word, Excel, Record-keeping software etc.) Must be able to work in a team environment and be able to explain issues clearly to team Must be analytical and detail oriented Must be able to pass pre-employment drug screen Must be able to pass a background check Desirable Experience, Education, and Training: Bachelor's degree in a Quality related field Previous supervisory experience Tools, Equipment, and Technology: Office equipment and technology Environmental Conditions: Manufacturing and fabrication shop environment Mix of shop floor and office / documentation work May require walking the yard, climbing stairs and inspecting large assemblies Englobal a Gulf Island Company will not sponsor applications for work visas. Additionally, applicants for employment with Englobal a Gulf Island Company, must be currently authorized to work in the United States on a full-time basis. Accordingly, Englobal a Gulf Island Company, will not consider applications from candidates who require the company to sponsor a work visa and who are not currently authorized to work in the United States on a full-time basis. Englobal a Gulf Island Company is not accepting unsolicited candidates from search firms for posted employment opportunities. Please no phone calls or emails. All resumes submitted by search firms to Englobal a Gulf Island Company, employees via email, the internet, or any other form and/or method without a valid written search agreement in place for the position will be deemed the sole property of Englobal a Gulf Island Company. No recruiting placement fee will be paid in the event Englobal a Gulf Island Company, hires the candidate due to the referral or through other means. #IND25

The Quality Control Inspector 1 supports the organization in the development, maintenance and execution of a quality control program that will allow the business to continually improve. In addition, the Quality Control Inspector 1 will help ensure that the supply being delivered from vendors and the product being shipped to customers meets the expected standards and specifications. Duties and Responsibilities: Inspect raw materials, machined, welded, and coated parts ordered and received at TEI (TRENDSETTER ENGINEERING, INC) headquarters from vendors and internal machine shop for quality and accuracy. Verify parts received against engineering drawings, specifications, and manufacturing records. Prepare electronic inspection reports for incoming products. Maintain incoming inspection log. Issue, document, and follow up on NCR's. Manage calibrated measuring equipment and certificate log. As necessary, perform other duties, requiring the same level of skill & responsibility. Support any new quality initiatives as required. Be familiar with company HSE (Health, Safety, and Environmental) policies and procedures. Share knowledge & best practice across the company. All other duties as assigned. Qualifications: Associate degree or at least 5 years of previous experience related to quality control inspection, preferably within the oil & gas industry. Advanced skills in dimensional measurement and verification, utilizing all necessary tools. Proficient computer skills and knowledge of Share point and Microsoft 365 required. Ability to demonstrate initiative and assertiveness, plan and organize work in an efficient manner, and work well under stress and time pressures. Strong interpersonal and communications skills, both verbal and written

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

Inspects finished products, products being processed, incoming materials, parts, and assemblies, etc., for conformance to company standards. Primary Job Functions: Conduct QC inspections and audits on contract requirements, and other services performed. Prepares reports, develops quality plans, attends meetings as directed; performs other duties as assigned. Checks randomly selected samples and verifies accuracy of equipment or process. Maintains a safe and healthy work environment by following standards and procedures, complying with legal regulations. Accomplishes quality and organization mission by completing related results as needed. Schedule inspection activities. Education, Experience and Certification: Required: High School Diploma or equivalent Required: 2 years of experience with quality control or an equivalent combination of education and experience sufficient to understand technical and process-based aspects of the services we provide. Required: OSHA Certification Knowledge, Skills, and Abilities: Knowledge of OSHA standards, NFPA, Joint Commissioning and safety procedures with skills in conducting accident investigations and safety inspections. • Basic knowledge of mechanical systems, critical thinking skills, and proficiency with standard testing tools. • ISO Lead Auditor Certification with a thorough understanding of ISO 9001:2015 standards • Knowledge of recognized and generally accepted good engineering practice regulations and codes. Excellent analytical and computer skills, specifically in MS Office Suite. Strong written and oral communication and presentation skills. Strong teamwork and interpersonal skills Financial Responsibilities: Determine if the role has the authority over budget or revenue. If so, you must describe in what manner in the description box. Disclaimer: CBRE Government & Defense Services are thrilled at the opportunity for you to apply for one of our roles. The base salary range for this position is $40,000-$60,000. This position may also be eligible for a wide range of competitive benefits that can include but are not limited to medical, well-being, financial planning and short-term benefits. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. The requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT & DEFENSE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE'S AT WILL EMPLOYMENT RELATIONSHIP WITH CBRE GOVERNMENT & DEFENSE SERVICES.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. Assists in other branch duties as assigned related to back office support and housekeeping. Performs other duties as assigned. Qualifications Education and Experience High School or equivalent (Required) 6 months to 2 years of transferrable industry experience (Prefered) Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications Valid Driver's License (Required) Transportation Worker Identification Credential (TWIC) (Preferred) Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities Continues to gain knowledge and expertise in the profession (Required) Uses existing procedures to solve routine or standard problems (Required) Has no discretion to vary from established procedures by performing structured work assignments (Required) Language Skills: English - Basic level (Required) Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) Reasoning Skills/Abilities: Intermediate level (Required) Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) Ability to work independently with minimal or no supervision (Required) Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job Stand: Frequently Move or traverse: Frequently Sit: Occasionally Use hands: Constantly Reach with hands and arms: Frequently Climb or balance: Frequently Stoop, kneel, crouch or crawl: Frequently Talk/hear: Constantly Taste/Smell: Occasionally Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Perform precision mechanical and electrical inspection/test of custom manufactured and commercial off the shelf parts and assemblies. Will provide inspection support in the areas of incoming quality control, internal first articles and in-process inspections. - Inspect machined/molded parts to assure conformance to engineering drawings and/or other documentation. - Document inspection results using manual and computer-based systems. - Generate Material Non-Conformance reports for items not meeting specifications. - Interface with personnel within the quality department regarding work assignments and priorities. - Interface with personnel in engineering, manufacturing and sales to resolve any issues relating to specifications or non-conformances. - Other duties as assigned by the department lead, supervisor or manager. Qualifications Previous experience in a precision mechanical inspection environment, such as a machine shop, molding shop or other fabrication/manufacturing company.Hands-on experience with common inspection tools such as: - Micrometers - Calipers - Pin/Plug Gages - Ring Gages - Go/No Go Gages - Height Gages - Profile Projectors - Profilometers - Surface Plates - Reading and interpretation of engineering drawings and specifications. - Computer skills, including familiarity with Microsoft Word and Excel. - Strong communication skills, both verbal and written. - Experience in use of and/or programming of automated inspection tools, such as vision inspection systems and CMMs. - Experience working in an ISO 9001 manufacturing environment. Education/Training: Required: High school diploma or equivalent (two years of college preferred), 3 to 5 years' experience in a manufacturing environment as a quality control inspector/technician. Preferred: ASQ Certified Quality Inspector. Working Conditions & Safety Concerns: Operates sophisticated inspection/test equipment in a laboratory and/or shop floor manufacturing environment. Works at a PC station as needed. Assists manufacturing personnel on the floor as needed. Some physical activity required. General safety practices followed, including use of personal protective equipment (PPE) such as safety glasses and steel toe shoes as required. Equal Employment Opportunity: All qualified candidates will receive consideration for all positions without regard to race, color, religion, sex, age, national origin, veteran status, disability, political affiliation, marital status, sexual orientation, or other non-merit factors. Must be able to work without sponsorship/authorization for any employer in the U.S.

Perform precision mechanical and electrical inspection/test of custom manufactured and commercial off the shelf parts and assemblies. Will provide inspection support in the areas of incoming quality control, internal first articles and in-process inspections. - Inspect machined/molded parts to assure conformance to engineering drawings and/or other documentation. - Document inspection results using manual and computer-based systems. - Generate Material Non-Conformance reports for items not meeting specifications. - Interface with personnel within the quality department regarding work assignments and priorities. - Interface with personnel in engineering, manufacturing and sales to resolve any issues relating to specifications or non-conformances. - Other duties as assigned by the department lead, supervisor or manager. Previous experience in a precision mechanical inspection environment, such as a machine shop, molding shop or other fabrication/manufacturing company.Hands-on experience with common inspection tools such as: * Micrometers * Calipers * Pin/Plug Gages * Ring Gages * Go/No Go Gages * Height Gages * Profile Projectors * Profilometers * Surface Plates * Reading and interpretation of engineering drawings and specifications. * Computer skills, including familiarity with Microsoft Word and Excel. * Strong communication skills, both verbal and written. * Experience in use of and/or programming of automated inspection tools, such as vision inspection systems and CMMs. * Experience working in an ISO 9001 manufacturing environment. Education/Training: Required: High school diploma or equivalent (two years of college preferred), 3 to 5 years' experience in a manufacturing environment as a quality control inspector/technician. Preferred: ASQ Certified Quality Inspector. Working Conditions & Safety Concerns: Operates sophisticated inspection/test equipment in a laboratory and/or shop floor manufacturing environment. Works at a PC station as needed. Assists manufacturing personnel on the floor as needed. Some physical activity required. General safety practices followed, including use of personal protective equipment (PPE) such as safety glasses and steel toe shoes as required. Equal Employment Opportunity: All qualified candidates will receive consideration for all positions without regard to race, color, religion, sex, age, national origin, veteran status, disability, political affiliation, marital status, sexual orientation, or other non-merit factors. Must be able to work without sponsorship/authorization for any employer in the U.S.

Job DescriptionQUALITY CONTROL INSPECTOR Reports to Operations Team PURPOSE: To assure the high-quality standards of the production process, including but not limited to the quality of materials and effectiveness of the manufacturing process. CORE VALUES: Customer Focused (develop relationships, exceed expectations, treat customers like you would like to be treated) Respect (employees, customers, suppliers, our brand) Teamwork (collaboration, open communication, be passionate and have fun) Results Driven (strong will to win; work to standard, not to time) Kaizen (continuous improvement; embrace change; don't settle, share ideas) WE OFFER: Competitive pay Great benefits package Excellent growth opportunities Great work/life balance. JOB RESPONSIBILITIES: Inspection, documentation, and occasional repair/re-boxing of returned goods. Inspection and testing of materials received, work-in-process, final assembly, final inspection and delivery to ensure adherence to Quikserv quality standards. Processing, quarantining, and recording of non-conforming goods such as returns, re-works and material wastes. Follow inspection protocols throughout the production process. Recommend changes in specifications of materials, parts, and products based on inspection results. Determine “root cause” on minor issues affecting product quality. Attend production meetings to stay on top of production priorities. Communicate concerns and countermeasures to assembly teams during daily shop huddles. Maintain records of quality control inspections. Backup for receiving, inspection, and issuing BR/glass panels for production. Follow all safety protocols. Recommend procedure changes that enhance safety. QUALIFICATIONS: 3-5 years of quality control inspector experience in a manufacturing environment. Demonstrable problem-solving experience. Excellent oral and communication skills. Knowledge of manufacturing processes, including but not limited to product receipts, inventory control procedures, workflow, crating and shipping. Strong time management, ability to meet deadlines. Experience with computer systems including Word processing and Microsoft Office applications. Ability to read dimensional drawings, tape measures, calipers, angle gauges and volt meters. Attention to detail. Some overtime required. Powered by JazzHR 1KKVOp9sGa

Job DescriptionBenefits: 401(k) Dental insurance Health insurance Vision insurance The QC Inspector position is responsible for inspections against the internal quality system (QMS), customer requirements, and industry standards. The QC Inspector is also responsible for inspecting raw material, inspecting finished product, internal process audits, and ensuring general customer satisfaction. Responsibility Including but not limited to: Use of precision tooling and measuring devices such as calipers, micrometers, coating thickness gauge, rulers, tape measures, stamping dies, extensometers, and many more. Writing and filling out QC reports and digital data entry. Use of MS office and internal digital programs. Perform FAI reports and communicate efficiently on the results of FAI. Read and interpret engineered drawings. Use GD&T to perform product evaluations. Inspect to engineered drawings and determine if a product is within tolerance. Issue NCRs against any raw material, process, or finished good product thats not within the required specifications. Will need to read and understand industry standards such as ASTM, ANSI, API, and ISO. Ensure the achievement of quality objectives of the department. Ensure 5S activities and their guidelines are adhered to. Effectively communicate with peers, management, and customers. Others as directed by the QC Supervisor. Experience and requirements: Must have at least a High School Diploma. Must be willing to work in a fast-paced environment. Can work in a team and is a team player. Experience working in an industrial setting. Use of precision measuring devices. Willingness to learn. Is flexible and can work overtime. Must pass a drug test as part of the hiring process. An ideal candidate will also have: Experience with ISO 9001. Can read engineered drawings. Proficient with MS Office. Can read, understand, and interpret industry standards. Can write SOPs, JHAs, and procedures.

Job Description EHC is currently looking for Quality Control Inspectors for a client in the south Houston, TX area. Hours: 7:00 am - 4:30 pm The quality control inspector must monitor the manufacturing and production processes to ensure that products are made in accordance with requirements and specifications. It also entails helping customers understand quality standards, ensuring that all products meet their contract specifications and standards. Final inspection must be conducted for all material leaving the machine shop. Responsibilities: Daily use and care of measuring equipment consisting of calipers, micrometers, tape measure, height gage and NPT threaded gages Daily inspection on inbound and outbound material Perform thorough examinations of all materials and finished products Implement and improve quality control operating procedures Participate in routine visual inspections Maintain a clean and safe work environment Ability to enter data into report Qualifications: At least 6 months experience Experience with fittings flanges pipe preferred Forklift experience Must be able to do simple math Ability to interpret technical product specs Strong attention to detail Excellent written and verbal communication skills Computer proficiency Proficient in Microsoft Word and Excel (SharePoint a plus) Work Environment: Extreme heat and cold temperatures may be encountered during the course of the workday. (Will work inside and outside of a machine shop.) Safety boots required.

Job DescriptionQC Inspector - 77073 Night Shift: 5:00 PM - 5:30 AMDays: Monday - FridayFlexibility Required: Must be open to working weekends as needed Pay: Based on Experience Position OverviewThe Quality Control (QC) Inspector is responsible for inspecting manufactured or processed products to ensure compliance with customer contract specifications, internal quality standards, and regulatory requirements. This role focuses on dimensional accuracy, tolerances, hardness, and overall product quality.Essential Responsibilities: Inspect products to verify compliance with order specifications, company quality systems, and applicable legal requirements Approve or reject products and document inspection results Measure and evaluate Dimensions and tolerances Angles, radii, contours, clearances Thread lead and surface finish Perform hardness testing on parts Inspect and verify gauges and measuring instruments for accuracy and conformance Prepare inspection reports, labor cards, job tickets, and required documentation Maintain established productivity and quality standards Communicate effectively with production, management, and other departments Maintain a clean, neat, and organized work area Follow all Good Manufacturing Practices (GMP) and safety procedures Ensure machine guards and safety equipment are in place and functioning properly Monitor and ensure required Personal Protective Equipment (PPE) is used at all times Perform additional duties as assigned QualificationsHigh School Diploma or GED required1-3 years of related quality inspection or manufacturing experience preferred Experience & KnowledgeAbility to perform a variety of inspection tasks Ability to read and interpret technical drawings, specifications, procedures, and regulations Ability to effectively communicate with managers, customers, and team members Working knowledge of word processing, manufacturing, database, and order processing systems Skills & CompetenciesStrong attention to detail and documentation accuracy Excellent organizational, time-management, and communication skills Solid math skills using whole numbers, fractions, and decimals Safety-focused and quality-driven mindset Ability to prioritize tasks in a fast-paced environment Physical RequirementsAbility to stand or sit for up to 8 hours Frequent hand and finger dexterity and fine motor coordination Occasional walking, climbing, balancing, and stooping Ability to lift up to 5 lbs frequently and up to 20 lbs occasionally Vision requirements include close vision, depth perception, color vision, and focus adjustment

Job Description A Quality Control (QC) Inspector for threaded pipes is responsible for ensuring that the threads on pipes meet specific standards and tolerances. This role involves the utilization of precision gauges and instruments to measure machined threads and the outside diameter of pipes to determine thread height, taper, thread ovality, and other critical dimensions. KEY RESPONSIBILITIES: Setup all hand tools readily accessible to the job being performed Review work order packet for job to verify correct product is to be produced Assure Log Sheets are correct for the product to be produced Coordinate with the Gage Lab for proper gages to measure product Assure gages are mastered and set as required after production starts, as well as during production operation as required Log all measurements for product on to the Log Sheet based on frequency as instructed for product type and Customer Identify all rejected product on Digital Log Sheet and describe reason Identify all rejected physical product as per instructions and alert operator Assure all First and Last Article inspection is conducted as required Alert operator and Supervisor if cause of rejection persists and participates in resolving of reason for rejection Assure that material for order is correct as described on the work order Alert Supervisor and Gage Lab of any concerns regarding performance of gaging or measurement instruments Quality minded individual with a dedication to superior products Follow all applicable work instructions, specifications, and requirements Assist in training of inexperienced inspectors Follow all Company Rules, Procedures and Policies Follow all Company Safety Rules Any other duties as assigned by the Supervisor EXPERIENCE, SKILLS, AND KNOWLEDGE: 1 year experience as production operator/or previous experience as QC inspector in previous company Working knowledge of blueprint reading and basic math. Must be fluent in English, with the ability to read, write, and communicate effectively. Ability to understand and execute instructions well EDUCATION, TRAINING, AND CERTIFICATIONS: High School education or equivalent is preferred CRITICAL COMPETENCIES & CAPABILITIES: Teamwork Adaptability Accountability Reliability/dependability Initiative Safety awareness Ability to receive and provide constructive feedback Pride in performance Continuous Improvement/Quality Communication Positive responses to change High attention to detail

We are seeking an experienced QC Representative to join our team in east Houston. The QC Representative reports to the Production Supervisor of their respective warehouse and inspects value-added finished products to ensure the product meets all the customer specifications. Responsibilities: Inspects products to ensure that they meet company and customer quality standards Ensures products meet customer expectations on company objectives Rejects all products and materials that fail to meet quality expectations Completes nonconformance reports when a product does not meet customer quality standards Completes quality reports to document compliance or errors of product inspected Communicates the results of inspections and puts forward corrective suggestions Labels parts as specified by the customer and company quality system Palletizes and/or bundles finished products for shipment to customers Reviews shipments and accompanying documents for quality and accuracy Transports and/or loads finished products (manually and/or using forklifts and overhead cranes) Additional duties as assigned including but not limited to: palletizing, deburring Qualifications: High School Diploma, GED, or equivalent 2+ years of related experience Strong organizational skills and attention to detail Ability to read and understand company and customer drawings Strong math aptitude and ability to accurately utilize measuring instruments such as measuring tape and caliper Extensive product and industry knowledge (carbon steel plate, burning, rolling, and beveling) preferred Professional communication and interpersonal skills Physical Requirements: Ability to lift up to 50 lbs independently on a routine basis and handle materials safely as part of daily job duties. Ability to stand for extended periods and maintain safe body positioning while performing tasks and moving through the work area, including walking on concrete floors and uneven surfaces. Frequent squatting, bending, stooping, reaching, pushing, pulling, and lifting, requiring full-body mobility, balance, and upper- and lower-body strength to perform work safely. Manual agility to operate tools safely and effectively, with regular use of arms, shoulders, and back for lifting, reaching, and positioning tasks. Ability to work safely in a warehouse environment with exposure to noise, dust, moving equipment, and varying temperatures. Ability to demonstrate adequate visual and auditory acuity to safely perform assigned tasks, including but not limited to: identifying potential hazards, reading and/or recording measurements, inspecting materials, and responding promptly to verbal instructions, alarms or hand signals in the work environment.

Inspects finished products, products being processed, incoming materials, parts, and assemblies, etc., for conformance to company standards. Essential Duties and Responsibilities Conduct QC inspections and audits on contract requirements, and other services performed. Prepares reports, develops quality plans, attends meetings as directed; performs other duties as assigned. Checks randomly selected samples, and verifies accuracy of equipment or process. Maintains a safe and healthy work environment by following standards and procedures, complying with legal regulations. Accomplishes quality and organization mission by completing related results as needed. Schedule inspection activities. Knowledge, Experience and Skill Requirements Knowledge of OSHA standards, NFPA, Joint Commissioning and safety procedures with skills in conducting accident investigations and safety inspections. Basic knowledge of mechanical systems, critical thinking skills, and proficiency with standard testing tools. ISO Lead Auditor Certification with a thorough understanding of ISO 9001:2015 standards Knowledge of recognized and generally accepted good engineering practice regulations and codes. Excellent analytical and computer skills, specifically in MS Office Suite. Strong written and oral communication and presentation skills. Strong teamwork and interpersonal skills Work Experience Up to 2 years of experience of Quality control or an equivalent combination of education and experience sufficient to understand technical and process-based aspects of the services we provide. Education, Licenses and Certification Required: High School Diploma OSHA Certification This job description is subject to change by the employer as the needs of the employer and requirements of the job change. J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $40,000 to $60,000. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes: U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved. Day Schedule: 6 on / 3 off ( 12hr shifts).

Job Title: QC Inspector Lead Company: All Tex Personnel Location: Houston, TX Schedule: 7:00 AM 7:00 PM (Rotating Shifts) Employment Type: Full-Time All Tex Personnel is seeking a QC Inspector Lead to oversee quality control operations in an industrial setting. The ideal candidate will have experience in inspection procedures, documentation, and quality assurance practices. This role requires attention to detail, leadership skills, and the ability to work rotating shifts. Responsibilities Conduct inspections of materials and finished products to ensure compliance with specifications Document inspection results and maintain accurate records Lead and support a team of QC inspectors Collaborate with production teams to resolve quality issues Ensure adherence to safety and regulatory standards Recommend process improvements to enhance product quality Preferred Qualifications Prior experience in industrial quality control Familiarity with inspection procedures and documentation standards Strong communication and leadership skills Ability to work 12-hour rotating shifts Bilingual (English/Spanish) is a plus Package Details