Quality inspector jobs in Tampa, FL

Working closely with our Project Manager, the QC/QA Inspector is expected to perform a variety of tasks related to quality and compliance. Major Functions of the Job * Full time 40+ hours per week, with the ability to travel within Florida up to 25% and periodically outside Florida. Required to work irregular shifts that may occur during nights, holidays, and weekends. * Assist with compliance/quality assurance reviews in the field as assigned by project or function. * Assist with or perform QC/QA inspections and/or Compliance Reviews. * Oversee established processes and procedures that have been developed by the company to manage the quality management program. * Work closely with Project Manager to ensure adherence to all applicable federal, state, local policies and procedures. * Create and modify documents using Microsoft Office products. * Coordinate and maintain records for the quality program, contractual requirements (report writing), * Be an independent, dependable, reliable and highly organized member of the team with business maturity, discretion, enthusiasm, and positive attitude. * Show initiative; seek out work and get the job done without being told. * Communicate clearly with supervisors and other team members. * Expected to meet the 60-minute response requirement for on-call IRC Manager on a 3-week rotation and as needed for the project. Minor Functions of the Job * Lead and coordinate meetings and required training. * Participate in weekly safety meetings and required training. * Be a dependable, reliable and highly organized member of the team with business maturity, discretion, enthusiasm, and positive attitude. * Provide assistance to project, regional management and support staff as necessary. * Be familiar with various parts of roadway, bridge, drainage structures and other road assets and correct work methods for various activities required to maintain and repair highway infrastructure. * Complete daily logs and perform routine maintenance checks on assigned vehicles: check fluids, air filter, tire pressure, change tire, etc. * Be a dependable and reliable member of the team. * Show initiative; seek out work and get the job done without being told. * Provide assistance to other workers as necessary. Physical Requirements and Environmental Factors Capable of lifting up to 50 pounds repeatedly while twisting; other strenuous manual labor may be required. * Will ascend/descend structures to perform job duties. * Work safe and independently in vehicle traffic zones. * Ability to work safely in a wide range of environmental and weather conditions (i.e. work in hot, cold or wet conditions for extended periods of time). * Ability to stand for extended periods of time while operating equipment. * Ability to operate hand/power tools. * Must wear personal protective equipment at all times on job site. Qualifications * Some college education or experience in related field * Maintain company standards for background checks (i.e. criminal record, driving record and controlled substance/drug testing) * Knowledge of local driving rules and regulations * Maintain proper safety equipment required for each job * Knowledge and ability to adapt to the latest technology * Intermediate proficiency with smart phone, computer, and Microsoft Office applications * Ability to adjust to changing work schedule * Ability to perform with minimal supervision * Ability to work safely under ranging environmental and weather conditions * Read and understand manuals, write documents following prescribed formats * Knowledge of Microsoft Office software * Solid organizational planning * Proper phone technique and protocol * Excellent verbal and written skills * Ability to establish priorities and manage workload * Ability to perform basic math skills including calculations using fractions, percents, and/or ratios * Self-starter who can work independently * Dependable and highly organized with business maturity, discretion, enthusiasm, and a positive attitude All employees must adhere to Jorgensen's safety policy, employment policies, procedures and programs and contribute to the PACT culture. Roy Jorgensen Associates, Inc. is an Equal Opportunity Employer and is committed to diversity in our workforce. EOE/M/F/D/V

Title: Quality Control Inspector Duration: 6 months (Possible extension) 1 PM TO 9 PM PAY RATE: $22/hR. Qualifications: 1 PM TO 9 PM Plans and directs activities concerned with development, application, and maintenance of quality standards for industrial processes, materials, and products. Tests and inspects products at various stages of the production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Must have Basic Computer Proficiency to include fundamental tasks such as email, word processing software, creating and maintaining spreadsheets in MS Excel and navigating Operating systems. EDUCATION and/or EXPERIENCE: Associate degree in an aviation related field preferred At least 1-year relevant aviation work experience Minimum of 2 years'experience in basic dimensional/visual inspection required on aviation related equipment (airframe, powerplant, and or avionic) Certify visual acuity to NAS-410 Airframe and Powerplant FAA certifications preferred Responsibilities: ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Provide quality control final inspection support, and shipping / receiving inspection support. Accurately interpret engineering drawings, customer specifications, company specifications, sampling procedures, designs, forms, and instructions for recording, evaluating, and reporting quality and reliability data. Utilize precision tools and equipment with accuracy for testing and measurement of products. Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.

Job DescriptionShift Lead Responsibilities and Accountabilities:· Coordinate the activities of all production employees to meet production goals as defined following all safety and ISO requirements.· If not completing one of these responsibilities, time should be focused on improvement projects or production requirements. Such as assembly or working parts.· Beginning of shift:Ø Assign jobs based on each team members strengths· Twice per shift:Ø Ensure each operator is following all instructions in the folder exactly - verify parts and process against folder and review labelsØ Physically pull a molded part from operator and compare to requirementsØ Ensure each operator is completing the folder as requiredØ Review scrap bin and quantities to determine if scrap rate is 5% or less. If more than 5%, elevate to process team and managementØ Verify operators are following work instructions such as cleaning up before leaving a pressØ Address alarms that don't require a technicianØ Ask quality if there are any concerns that need to be addressedØ Review each work cell and the production floor to ensure things are put away in the proper location, parts aren't falling on the floor, operators aren't deviating from instructions, folders and tools aren't left from previous run· Weekly:Ø Ensure operators are completing assigned chores· Team Leadership:Ø Be an expert in defined procedures and ensure team members are following them exactly.Ø Monitor employee performance, conduct reviews, and write ups on a timely basis.Ø Develop training plans for employees to allow for development.Ø Ensure required training is completed by all team members.Ø Complete new employee on-boarding training requirements.Ø Make recommendations for changes to procedures to improve the process.Ø Ensure team members have the proper tools for the job.· LogisticsØ Oversee production floor in the maintenance of inventory of raw material, finished goods and WIP (work in progress).Ø Determine proper storage methods for identification, turnover and environmental factors.Ø Oversee the examination of contents and compare with records to verify accuracy of incoming or outgoing shipments. Quality Inspector Responsibilities and Accountabilities:· Conduct first hour and final inspections by measuring and visually inspecting products for surface and dimensional defects using precision measuring instruments.· Conduct in-process inspections by measuring and visually inspecting products for surface and dimensional defects using precision measuring instruments.· Conduct measuring equipment verifications.· Compare colors, shapes, textures or grades of materials with samples or charts to verify conformance to standards.· Complete required documentation of inspection results.

Why join us? AtkinsRéalis is growing fast in the U.S.-and there's never been a more exciting time to be part of our journey. We're committed to engineering a better future for our planet and its people. That means creating solutions that matter, and building a workplace where every voice is heard, every perspective counts, and everyone belongs. By connecting people, data, and technology across our global network, we're tackling some of the world's most complex challenges. And we're looking for passionate, driven professionals like you to help shape what's next. Let's build the future-together. We are seeking a Senior Inspector to join our team in Tampa, FL. About Us AtkinsRéalis is a world-class engineering services and nuclear organization. For over 50 years, we've partnered with public and private clients across the U.S. to deliver infrastructure planning, engineering, construction, environmental consulting, urban planning, architecture, and program management. Our depth and breadth of expertise enables us to tackle the most technically complex and time-sensitive projects-driving innovation, resilience, and real-world impact where it matters most. How will you contribute to the team? * Performs density and asphalt test; samples and verifies certification of materials. * Observes construction work such as a trench excavation, pipe placement, backfill operations, pile driving, structure placement, steel reinforcement, concrete pouring, signalization and lighting. * Responsible for coordinating and managing lower level inspectors. * Must have experience working on FDOT projects. What will you contribute? * High school diploma (or equivalent). * Four (4) years of CEI experience in roadway construction. * Asphalt Paving experience is required. * Must have the following FDOT certifications/qualifications or be able to obtain with three months: * CTQP Final Estimates Level I and Level II. * CTQP Concrete Field Technician Level I. * CTQP Concrete Field Inspector Level II. * CTQP Asphalt Roadway Level I and Level II. * CTQP Earthwork Construction Inspection Level I and Level II. * CTQP Pile Driving Inspection. * CTQP Drilled Shaft Inspection. * FDOT Intermediate Temporary Traffic Control (TTC). * IMSA Traffic Signal Inspector Level I. * Nuclear Radiation Safety/HAZMAT. * Florida Stormwater, Erosion, and Sedimentation Control Training and Certification Program for Inspectors and Contractors. What we offer at AtkinsRéalis: At AtkinsRéalis, our values-Safety, Integrity, Collaboration, Innovation, and Excellence-are more than just words. They are the foundation of who we are and how we work. These principles shape our culture, guide our decisions, and inspire us to create an environment where every team member feels empowered to grow, succeed, and make a meaningful impact. Depending on your employment status, AtkinsRéalis benefits may include medical, dental, vision, company-paid life and short- and long-term disability benefits, employer-matched 401(k) with 100% vesting, employee stock purchase plan, Paid Time Off, leaves of absences options, flexible work options, recognition and employee satisfaction programs, employee assistance program, and voluntary benefits. You can review our comprehensive benefits page here. Are you ready to expand your career with us? Apply today and help us shape something extraordinary. AtkinsRéalis is an equal opportunity, Drug-Free employer EOE/Veteran/Disability Please review AtkinsRéalis' Equal Opportunity Statement here. AtkinsRéalis cares about your privacy and is committed to protecting your privacy. Please consult our Privacy Notice our Careers site to know more about how we collect, use and transfer your Personal Data. By submitting your personal information to AtkinsRéalis, you confirm that you have read and accept our Privacy Notice. Note to staffing and direct hire agencies: In the event a recruiter or agency who is not on our preferred supplier list submits a resume/candidate to anyone in the company, AtkinsRéalis family of companies, we explicitly reserve the right to recruit and hire the candidate(s) at our discretion and without any financial obligation to the recruiter or agency. ***************************************************** Worker Type Employee Job Type Regular At AtkinsRéalis, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences.

Join us as we Rise to the Challenge At KCI, we're building an enduring community that provides unparalleled value to our employee-owners. We make our mark designing and delivering our world-class solutions, so we invest deeply in supporting and developing our team. We reward integrity and commitment, and when we do well, you do well. Our employee's have the freedom to innovate, unlimited growth, a voice that matters, a lifestyle that works, and skin in the game. Achievements are shared and celebrated. As a team, we are motivated to better ourselves, each other, and the world around us. THE COMPANY KCI Technologies, Inc. is a 100% employee-owned engineering, consulting and construction firm serving clients throughout the United States. KCI is recognized as an industry leader, employing cutting-edge technologies, management practices and strategic growth initiatives. Employee ownership fosters an entrepreneurial spirit, encourages technical expertise, and shapes strategic planning. KCI is currently ranked #53 on Engineering News-Record's list of the Top 500 design firms in the nation. KCI BENEFITS INFORMATION We offer a competitive compensation package, family friendly benefits, a collaborative working environment, and the training, mentoring and resources you need to advance in your career. We understand that you have choices, and we know that together we will make a great team! KCI is committed to building a diverse and inclusive staff, and we encourage women, people of color, LGBTQ+ individuals, and individuals with disabilities to apply. Duties, Responsibilities & Other A CEI Landscape Inspector must enjoy field work and have the physical condition to walk construction sites and to perform close examinations of tree roots, branches, leaves, site soils and irrigation systems. We are interested in seeing the combination of skills, experience, certifications, and education that you have to succeed in this field. Duties: * Inspect landscape projects to ensure compliance with the contract documents. * Produce photo documented reports. * Maintain daily records and tracking work progress. * Professional communication and interaction with contractors and others. * Must find and identify construction deficiencies, evaluate corrective actions, and formulate responses. * Must collaborate and coordinate with other members of the team. * Attend construction progress meetings. Degrees/Licenses: * Green industry Certifications - ISA, LIAF, FNGLA. * Valid Florida Driver's License Skills: * Excellent knowledge of Florida plants and the Florida Grades and Standards for Nursery Plants. * Current knowledge of landscape installation and maintenance procedures and horticultural practices. * Working knowledge of irrigation systems. * Comprehensive knowledge of the methods, tools and equipment used in the industry. * Thorough understanding of construction plans, specifications, and details. * Proficient with Microsoft Word and Excel. * Ambitious and committed to producing excellence work. * Manage multiple projects and adapt to ever changing schedules. * Ability to travel throughout Florida. Qualifications Education and/or Skills Required: * Minimum of 4 years of relevant work experience * Highschool/GED * Ability to understand construction plans, specifications, and procedures. * Demonstrate basic math skills, including geometry and trigonometry. * Possess the ability to read, write, and communicate fluently. * Work effectively as a team member and complete daily reports by hand and computer. Certificates, licenses, and/or Registrations Required: * Valid Driver's License * Ability to pass and maintain required certifications

Why join us? AtkinsRéalis is growing fast in the U.S.-and there's never been a more exciting time to be part of our journey. We're committed to engineering a better future for our planet and its people. That means creating solutions that matter, and building a workplace where every voice is heard, every perspective counts, and everyone belongs. By connecting people, data, and technology across our global network, we're tackling some of the world's most complex challenges. And we're looking for passionate, driven professionals like you to help shape what's next. Let's build the future-together. We are seeking a Senior Inspector to join our team in Tampa, FL. About Us AtkinsRéalis is a world-class engineering services and nuclear organization. For over 50 years, we've partnered with public and private clients across the U.S. to deliver infrastructure planning, engineering, construction, environmental consulting, urban planning, architecture, and program management. Our depth and breadth of expertise enables us to tackle the most technically complex and time-sensitive projects-driving innovation, resilience, and real-world impact where it matters most. How will you contribute to the team? Performs density and asphalt test; samples and verifies certification of materials. Observes construction work such as a trench excavation, pipe placement, backfill operations, pile driving, structure placement, steel reinforcement, concrete pouring, signalization and lighting. Responsible for coordinating and managing lower level inspectors. Must have experience working on FDOT projects. What will you contribute? High school diploma (or equivalent). Four (4) years of CEI experience in roadway construction. Asphalt Paving experience is required. Must have the following FDOT certifications/qualifications or be able to obtain with three months: CTQP Final Estimates Level I and Level II. CTQP Concrete Field Technician Level I. CTQP Concrete Field Inspector Level II. CTQP Asphalt Roadway Level I and Level II. CTQP Earthwork Construction Inspection Level I and Level II. CTQP Pile Driving Inspection. CTQP Drilled Shaft Inspection. FDOT Intermediate Temporary Traffic Control (TTC). IMSA Traffic Signal Inspector Level I. Nuclear Radiation Safety/HAZMAT. Florida Stormwater, Erosion, and Sedimentation Control Training and Certification Program for Inspectors and Contractors. What we offer at AtkinsRéalis: At AtkinsRéalis, our values-Safety, Integrity, Collaboration, Innovation, and Excellence-are more than just words. They are the foundation of who we are and how we work. These principles shape our culture, guide our decisions, and inspire us to create an environment where every team member feels empowered to grow, succeed, and make a meaningful impact. Depending on your employment status, AtkinsRéalis benefits may include medical, dental, vision, company-paid life and short- and long-term disability benefits, employer-matched 401(k) with 100% vesting, employee stock purchase plan, Paid Time Off, leaves of absences options, flexible work options, recognition and employee satisfaction programs, employee assistance program, and voluntary benefits. You can review our comprehensive benefits page here. Are you ready to expand your career with us? Apply today and help us shape something extraordinary. AtkinsRéalis is an equal opportunity, Drug-Free employer EOE/Veteran/Disability Please review AtkinsRéalis' Equal Opportunity Statement here. AtkinsRéalis cares about your privacy and is committed to protecting your privacy. Please consult our Privacy Notice our Careers site to know more about how we collect, use and transfer your Personal Data. By submitting your personal information to AtkinsRéalis, you confirm that you have read and accept our Privacy Notice. Note to staffing and direct hire agencies: In the event a recruiter or agency who is not on our preferred supplier list submits a resume/candidate to anyone in the company, AtkinsRéalis family of companies, we explicitly reserve the right to recruit and hire the candidate(s) at our discretion and without any financial obligation to the recruiter or agency. ***************************************************** Worker TypeEmployeeJob TypeRegular At AtkinsRéalis , we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences.

While reporting to the Quality Control Manager, as the Quality Control Inspector, you will be responsible for collaborating and contributing to the production environment within our manufacturing operations. Safety, quality, productivity, and a strong work ethic are important to the Highland Packaging culture. The position is an essential element of our manufacturing process, you will be responsible for performing certain quality checks and integrity testing on the finished clamshell product before it is shipped out to the customer. You should be able to understand all forms and paperwork and be able to communicate (write and speak) clearly in English. What You'll Be Doing: Must be able to conduct various QC tests on the finished product involving weight and measurement. Must be able to understand and complete associated paperwork entirely and proficiently (in English). (Must speak, read, and write in English) Must be able to lift up to 50 lbs. Must be able to stand for long periods. Must be able to understand and adhere to Food Safety and Workplace Safety company policies. Must be able to stretch arms out to shoulder height and occasionally overhead and twist, bend and/or stoop. The position requires/necessitates a flexible working schedule where overtime hours may be involved. We'd love to hear from you if: You have previous manufacturing experience and/or training Read and comprehend standard work instructions Arrive to work on time with a strong attendance record An individual looking to advance with a high school diploma or GED Work schedules are subject to change- The operation is 24/7. Why You'll Like Working With US: We care about YOU through employee development, providing excellent benefits, investing in your future and valuing diversity and inclusion. Additional Information Shift: 5:45pm - 6:15am/4 days on and 4 days off Pay Rate: $16.27/hr. plus .50 shift differential Location: Plant City, FL

Job Description Space Machine & Engineering (SME) is currently seeking a Quality Inspector to measure and ensure mechanical assemblies conform to engineering drawings. JOB HOURS: 7:00am-3:30pm shift, Mon-Fri. Overtime as required. JOB RESPONSIBILITIES: Perform inspection of mechanical assemblies and sub-components using a variety of precision measuring equipment. Proficient in interpreting complex engineering drawings, including feature controls, tolerances, and functional requirements. Verify mechanical dimensions to customer prints and flow downs. Collaborate with operations on a daily basis to ensure product conformance. Maintain work area and equipment in a clean, safe and orderly manner. Operate equipment safely in accordance with SME standards. Complete all production and quality paperwork as required. Compile digital packages as required by customer. Additional duties as required. QUALIFICATIONS: 3 to 5 years of experience is required. Strong understanding of AS9100, ITAR, CUI, CMMC, DPAS, DFARS requirements. CMM programming and operation. The ability to read and interpret the requirements of drawings GD&T. Experience in the use of mechanical measuring tools (electronic height gauges, calipers, gauge pins, etc.). Excellent multi-tasking skills and the ability to manage multiple tasks simultaneously. Self-motivated with critical attention to detail, deadlines. Ability to develop and maintain a positive collaborative relationship with peers and colleagues. Strong communication skills. Able to work as part of a team and independently. Experience inspecting machined parts with tolerances of +/-.0005” Experience inspecting components and assemblies. Able to work additional hours when required. U. S. citizenship required or permanent Resident card PHYSICAL ASPECTS/WORK ENVIRONMENT: Regularly required to stand, sit, and view parts through a microscope and borescope. Occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and ability to adjust focus. Benefits: Eligible for 401(k) retirement plan Health, dental, vision, life and disability insurance Paid time off Space Machine & Engineering Corp. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against based on their race, color, Religion, gender, disability, veteran status, sexual orientation, national origin, or other protected classification.

Travel: Up to 25% Number of Openings: 1 Achieve more in your career with the nation's leading specialty concrete contractor. At Baker Construction, you'll be part of a team that prioritizes people, invests in their development, and offers unparalleled opportunities for professional growth. In this role, you'll be integral to building the future of our country and our company. You'll collaborate across diverse teams, have a hand in significant projects, and dive headfirst into complex challenges with the best in the industry. If you are driven to do more and have the grit to follow through, you'll have everything you need to define your career on your terms. Make a meaningful impact with a team that values ambition and rewards initiative. Apply today and be more with Baker. Summary The Inspector Level II is responsible for implementing inspection processes. He/she is certified in specific disciplines and has detailed understanding of applicable codes and/or standards. Certified by appropriate agency or organization to represent inspection for a given discipline under a specific quality management program. They Inspector Level II shall have sufficient practical background in applicable materials, fabrication, and product technology. He/she is responsible for evaluating and reporting the validity and acceptability of inspection and test results. Roles and Responsibilities The Inspector Level II will possess competency in the following areas in order to perform his/her role in a safe, productive, and effective manner. Note that the areas listed are intended to describe the general nature and level of work being performed by co-workers assigned to this role. They are not intended to be an exhaustive list of all the responsibilities, skills, efforts, or working conditions associated with this job. * Implements Inspection Plans * Ensures a Safe Work Environment * Participates in Training/Certifications Requirements * Bachelor's Degree in an engineering, scientific, or construction-related discipline from an accredited college or university and 2 years related experience or 1 year prior experience as a Level I Inspector. * Knowledge of construction practices (i.e., formwork, rebar, concrete placing, etc.) * Demonstrated skill and knowledge with applicable quality codes and standards. At Baker Construction, we welcome those who are driven to make things happen. Your tenacity will be rewarded with great pay, excellent benefits, and opportunities to make your mark. This is an opportunity to own your future while working alongside co-workers who are united in our purpose to build better structures and better lives. Go further with an industry leader that puts people first, honors its word, and has the grit to achieve greatness. Baker is an EOE Disability/Veterans Employer. Applicants with physical and/or mental disabilities who require a reasonable accommodation for any or part of the application process may make their requests known by emailing ************************ or calling ************** and asking for HR. Nearest Major Market: Tampa

Primary Function: The Quality Inspector is responsible for following Genesys Industries procedures to conduct the first article, in-process and final inspection on produced or procured mechanical and machined parts to ensure parts are defect-free. Report directly to General Manager. Use of all hand-held metrology equipment (Plug gages, Ring gages, Calipers, Micrometers, etc.) a must. Maintain all quality records in ERP System, operating automated equipment a Keyence Vision system is a plus. But willing to train. Responsibilities and Duties: Communicate quality or compliance concerns with urgency. Perform first article, in-process & final inspection on parts utilizing inspection equipment. Use knowledge of GD&T, QA methods & standards, inspection procedures & QA work instructions Update and maintain inspection documents. Ensure quality lab has calibrated inspection equipment. Support, understand and comply with all safety policies and procedures. Provide quality inspection of parts received from outside vendors. Requirements: Work weekdays Monday thru Friday 8AM-5PM Minimum 2 years' experience in Quality Inspection Experience using measurement instruments: comparators, calipers, micrometers etc. Must have good written and verbal English communication skills. Good arithmetic skills Prefer working knowledge of industry standards AS9100, ISO13485 &/or ISO900 High School Diploma or equivalent Ability to work in quality lab. Benefits Competitive Hourly Salary based on experience Matching 401(k) contribution up to 4% Paid Time-off and Nine (12) Paid Holidays Medical Insurance Dental Insurance Vision Insurance Physical Demands While performing the duties of this job, the employee may be required to walk, stand, sit and use hands to finger, handle, or feel parts. The employee is frequently required to reach with hands and arms and occasionally required to climb or balance; stoop, kneel, and crouch. The employee must regularly lift and /or move up to 15 pounds, frequently lift and/or move up to 50 pounds or more with appropriate assistance. Must be able to be on feet (not sitting) up to 40% of the time.

Quality Technician Position Reports To: Quality Director / Quality Supervisor Job Type: Full Time / Hourly Location: Various The Quality Technician supports daily food safety, regulatory compliance, and product quality within an FDA-regulated facility. This role is essential to First Grade Foods' readiness for SQF certification. The technician performs monitoring, verification, documentation, and administrative functions to maintain compliant operations and consistent product quality. Strong attention to detail, communication, and accountability are required. Essential Duties and Responsibilities: Food Safety & GMP Compliance Conduct and document pre-operational inspections, including weekends if scheduled. Verify sanitary conditions and employee GMP compliance throughout production. Monitor and record product, cooler, and process temperatures. Verify metal detection checks and escalate any failures immediately. Confirm sanitizer and chemical concentrations meet required specifications. Verify allergen changeovers, sanitation effectiveness, and allergen swab results. SQF & Regulatory Readiness Maintain accurate QA documentation aligned with SQF and FSMA Preventive Controls. Support internal audits across GMPs, sanitation, receiving, warehouse, and allergen control. Support corrective action and CAPA documentation. Assist with validation and verification of HACCP/PC/PRP programs. Participate in traceability, mock recalls, and mass balance activities. Ensure forms, SOPs, and logs are current and available at point of use. Production Quality Verification Perform label, ingredient, and packaging verifications for regulatory compliance. Conduct finished product weight checks. Perform sensory evaluations as assigned. Review production monitoring records for completeness and accuracy. Sanitation & Environmental Monitoring Support Assist Sanitation Technician with verification of SSOP compliance. Conduct environmental or allergen swabbing, ATP checks, or sanitation audits. Report deficiencies immediately to QA and Operations. Warehouse / Receiving Support Verify raw material receiving requirements, including COAs, allergen status, and temperatures. Confirm packaging materials match approved specifications and revision levels. Administrative & Documentation Duties File and maintain QA documents per document control requirements. Update electronic QA systems and trackers (SafetyChain, Smartsheet, Excel). Support training record management, KPI data, and audit preparation. Assist in drafting or revising SOPs, logs, and quality forms. Cross-Functional and Leadership Support Serve as backup for other QA Technicians when absent. Assist in investigations of quality issues, nonconformances, and product holds. Communicate concerns promptly to QA leadership, Production, and Maintenance. Perform additional tasks or special projects as assigned. Position Type / Expected Hours of Work: This is a full-time hourly position. Hours may vary based on production needs and QA coverage schedules. Overtime or weekend work may be required as needed for coverage. Other Duties: This position will support warehouse operations approximately 20% of the time. Training will be provided for all warehouse-related tasks and equipment. Warehouse Operations ( Approximately 20%) Receive, store, and distribute food products and materials efficiently and safely Operate forklifts, pallet jacks, and other warehouse equipment Maintain accurate inventory and assist with cycle counts Keep warehouse areas clean, organized, and compliant with safety standards Follow all company procedures and safety protocols This job description is not intended to cover all responsibilities. Duties may change or be assigned as business needs evolve. The company is an equal opportunity employer, drug-free workplace, and complies with ADA regulations as applicable.

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the world's largest independent bottler for retailers and A-brands. Our products are distributed worldwide from our production sites in Europe and Noth America. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solution-based. We are innovative. We seek out challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put or drinks on every table? Shift: 3rd Shift (10:00 PM to 6:30 AM, Monday - Friday) Essential Job Functions: * Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). * Responsible to adhere to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF). * Ensure all products conform to the customer specifications as outlined in SAP system. * Perform analysis on raw materials, finished batches, treated water and/or any other programmed outlines by the department. * Conduct chemical and physical analysis on raw and intermediate processing materials including packaging materials and determine status of materials as acceptable or unacceptable. * Evaluate finished products against current standards by performing audits to monitor all aspects of finished product and packaging integrity. * Check process control parameters to assure proper equipment application and operation is being maintained by performing secure seal, closure torque, can seam checks, and/or any other requirements required by the customer or the company. * Stop any production which may be questionable in terms of Food Safety and immediately alert a member of the management team. * Maintain accurate, legible records of all tests and retests performed. Complete all other required reports (work orders, action reports, etc.) in a timely manner. * Perform analytical tests required to qualify ingredient batches for production. * Perform production line checks at specified intervals. * Ensure accurate test results by maintaining proper operation and calibration of laboratory equipment. * Maintain laboratory cleanliness at all times. * Report all out of specification results to designated leadership. * Complete special projects and other reasonable duties as assigned by leadership. Required Skills: * Working knowledge of Excel, Word, and SAP preferred. * Exposure to using measurement tools and equipment (e.g., calipers, micrometers, CMM machines) preferred. * Organized and detail oriented, adaptable to change. * High level of precision and accuracy in inspection and testing processes. * Familiarity with SQF, SAP, Six Sigma, GMP, and other relevant standards and regulations * Understanding of Food Safety Requirements. * Able to read and understand metric system. * Food or beverage laboratory experience preferred. Competencies: * Technical: Skilled in maintaining accurate and detailed records of inspections and tests * Integrity: Commitment to maintaining high ethical standards in all quality assurance activities. * Adaptability: Flexibility to adapt to changing production environments and requirements Education and Experience: * Highschool diploma or equivalent. * 1 - 3 years of experience in Quality within a manufacturing environment preferred. * In plants co-packaging alcoholic beverages, must be at least 21 years old. Working Conditions: * Work Schedule: Weekdays, weekends, afternoon, evening, and overnight may be required. Overtime scheduled as needed. * Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold (laboratory is temperature controlled). The environment is structured and supervised. Travel Requirements: * 0% travel anticipated. Physical Requirements: * Visual/Sensory: This position requires attention to detail, requiring attention with one or two senses at a time. * Mental Stress: There is pronounced pressure from deadlines, production quotas, accuracy, or similar demands. Other Duties: * This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Refresco is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national orientation, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law.

• Perform detailed visual and paperwork inspection for compliance to quality requirements and specifications. • Primary interface with Customers and DCMA to resolve concerns relating to production hardware or requirements, ensure product meets company/customer requirements. • perform process and product audits • Ensure product meets and is documented in the configuration management systems. • Participate in RCCA (Root Cause Corrective Action) with cross functional groups Qualifications • Must be a United States Citizen. • High School Diploma or Equivalent is required. • Min 2 years inspection or related manufacturing experience • Must be familiar with fine pitch leads, component identification, soldering, bonding and conformal coating applications. • Previous experience in the manufacture of aerospace electronics highly preferred. • Must be familiar with ISO9001, AS9100, requirements. • Must be able to organize, prioritize and multitask. • Must be a motivated individual with a bias for action. • Must have basis computer skills and be familiar with Microsoft Excel, Word • Energetic team player that interfaces well at all levels of an organization. • Excellent communication skills both oral and written. • Ability to visually inspect using a microscope • Ability to interpret drawing requirements, perform work to inspection instructions Additional Information Shifts: Monday - Friday, 7:00am to 3:30pm Pay: 13/hr 6+ Month Contract *****This is an opportunity for contract to hire based on individual work performance and attendence***** **Looking for candidates with good work history, good attendance record, a positive attitude, and willingness to learn. Must be able to pass a background check and drug screen.

• Perform detailed visual and paperwork inspection for compliance to quality requirements and specifications. • Primary interface with Customers and DCMA to resolve concerns relating to production hardware or requirements, ensure product meets company/customer requirements. • perform process and product audits • Ensure product meets and is documented in the configuration management systems. • Participate in RCCA (Root Cause Corrective Action) with cross functional groups Qualifications • Must be a United States Citizen. • High School Diploma or Equivalent is required. • Min 2 years inspection or related manufacturing experience • Must be familiar with fine pitch leads, component identification, soldering, bonding and conformal coating applications. • Previous experience in the manufacture of aerospace electronics highly preferred. • Must be familiar with ISO9001, AS9100, requirements. • Must be able to organize, prioritize and multitask. • Must be a motivated individual with a bias for action. • Must have basis computer skills and be familiar with Microsoft Excel, Word • Energetic team player that interfaces well at all levels of an organization. • Excellent communication skills both oral and written. • Ability to visually inspect using a microscope • Ability to interpret drawing requirements, perform work to inspection instructions Additional Information Shifts: Monday - Friday, 7:00am to 3:30pm Pay: 13/hr 6+ Month Contract *****This is an opportunity for contract to hire based on individual work performance and attendence***** **Looking for candidates with good work history, good attendance record, a positive attitude, and willingness to learn. Must be able to pass a background check and drug screen.

M&J Engineering, P.C. is a quality provider of multi-discipline consulting services with over 300 employees. Since its inception in 2004, M&J has grown into diversified provider of engineering, construction management, construction inspection, technology, and environmental services to a broad range of clients, including federal, state and city/local agencies, private owners, architects, engineers and contractors. M&J Engineering is a leader in construction management and inspection, ITS, mechanical, electrical, wastewater, water supply, tunnel airport, port, marine/coastal, environmental engineering, and design-build services for both new infrastructure projects and renovations. M&J bases its employment and personnel decisions on the principles of Equal Employment Opportunity, with the intent to further the Company's Affirmative Action commitment. M&J does not discriminate on the basis of race, color, religion, national origin, sex, sexual orientation, pregnancy, gender identity or expression, age, disability, genetic information, marital status, citizenship status, employment status, veteran or military status, or any other category protected by law. Our Company vigorously pursues opportunities to recruit and develop job candidates who have the desire and potential for becoming qualified employees through our Affirmative Action Plan. M&J Engineering is seeking a Senior Construction Inspector with FDOT, CEI experience in South Florida. This role is ideal for someone who thrives in a fast-paced environment and loves turning insights into action. We are seeking a highly experienced professional responsible for ensuring that construction projects align with FDOT plans, specifications, and codes. They manage and coordinate lower-level inspectors, conduct inspections, and maintain records. Specifically, they monitor on-site construction activities, inspect materials, and ensure conformance with the project's requirements. They also play a crucial role in monitoring and inspecting Work Zone Traffic Control Plans, including alternate plans. Apply through this site or send resume to ***********************. Responsibilities Inspecting Construction Work: Ensuring adherence to plans, specifications, and codes. Coordinating and Managing Inspectors: Supervising and directing lower-level inspectors. Maintaining Records: Keeping detailed records of daily operations and significant events. Monitoring Work Zone Traffic Control: Ensuring compliance with FDOT's Work Zone Traffic Control Plan. Inspecting Materials: Verifying that materials entering the work site meet project requirements. Performing Inspections: Conducting field inspections and maintaining records. Performing technical assignments: field surveying and construction layout, marking, and checking engineering computations, inspecting construction work, and conducting field tests Project Administration Manual: Familiarity with and adherence to the Construction Project Administration Manual (CPAM). Qualifications Must have Construction Inspection experience in Florida and preferably Roadway or Bridge construction experience. Valid U.S. Driver's License. CTQP Final Estimates Level I CTQP Concrete Field Technician Level I CTQP Concrete Field Inspector Level II (Bridges) CTQP Asphalt Roadway Level I CTQP Asphalt Roadway Level II CTQP Earthwork Construction Inspection Level I CTQP Earthwork Construction Inspection Level II CTQP Pile Driving Inspection CTQP Drilled Shaft Inspection FDOT Intermediate MOT IMSA Traffic Signal Inspector Level I Nuclear Radiation Safety Florida Stormwater, Erosion, and Sedimentation Control Training and Certification Program for Inspectors and Contractors Preferred FDOT experience. Benefits M&J is a leader in providing quality engineering consulting services to a diverse and exciting client base. We attract experienced professionals who understand proactive client service, safety, risk management and loss prevention practices, quality control, teamwork, and the development of younger staff. We seek employees who enjoy their work, desire continuous improvement, and want to contribute to the vision and growth of a quality, employee-owned, professional firm. To all full-time employees we provide a comprehensive package of benefits, including medical, dental and eye insurance, 401(k) retirement plan, life insurance, etc. Salary will depend on experience and credentials.

DUTIES AND RESPONSIBILITIES: Perform SOP validation audits. Hands-on end process product and documentation verification audits. Properly document all audit findings timely and accurately. Suggest new SOPs and revisions to current SOPs based on audit results. Propose process improvement ideas to the Business Model to the QA Inspector II based on audit results. Monitor the use of equipment to ensure it is safe and accurate and notify area management of need to discard equipment that does not meet specified requirements. Keep measurement equipment operating accurately by following calibration requirements and notify area management of need for repairs. Report nonconformance/deviation issues to QA Inspector II. Continually identify areas of opportunity to improve efficiency and effectiveness. Advocate for quality improvement throughout the organization. May be required to participate in external supplier audits. Requirements JOB REQUIREMENTS / QUALIFICATIONS 2-3 years' experience working in a GDP/GMP or ISO environment Maintain knowledge of quality and regulatory standards relevant to the position. Excellent verbal and written communication skills. Excellent organizational skills. Keen attention to detail. General knowledge of quarantine and warehouse operations Ability to meet deadlines and to work independently in a fast-paced environment. Team player. PHYSICAL REQUIREMENTS Ability to walk or stand 85% of the workday. DESIRED KNOWLEDGE/SKILLS GMP Requirements

RK&K's Construction Engineering Inspection (CEI) and Construction Management Division is hiring Senior Construction Inspectors in the (Lakeland/Polk County area). As a Senior Construction Inspector with RK&K you will strengthen our construction engineering and inspection business while leading complex and routine inspections on projects including highway, bridge, design/design-build projects. This position also includes supporting inspection and quality control measures for projects and assignments related to site development, new construction, and replacement, rehabilitation, and repair of county/city owned infrastructure. Opportunities for growth and training into construction management and office engineering careers. Essential Function Provide construction management support, including inspection and monitoring of construction structures to ensure compliance with safety regulations Fully engage in solving complex problems to provide technical evaluation and sound solutions Monitor the activities of other Inspectors Ability to communicate effectively across different platforms with project management, clients, stakeholders, and contractors Interface with clients, state and federal agencies, and other engineering disciplines on construction projects Recordkeeping and reporting as required Required Skills and Experience High school graduate or equivalent plus four (4) years of experience in construction inspection, two (2) year of which shall have been in roadway construction inspection Must have the following as required by the scope of work for the project: CTQP Concrete Field Inspector CTQP Asphalt Roadway CTQP Earthwork Construction Inspection CTQP Drilled Shaft FDOT Intermediate MOT Qualifications Preferred Skills and Experience Previous roadway asphalt inspection experience Critical Structures Construction Issues certification FDOT Self Study Computer Based Training (e.g. MSE Wall Inspector) Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Tuition reimbursement Health, dental, vision, life, and disability insurances Matching 401(k) plan Paid Holidays Much, much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today!

Pay Rate: $20.00/Hour, Plus $1.00/Hour Shift Differential Shift: Nightshift (6:00 PM to 6:30 AM, Continental / Block Schedule) Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Essential Job Functions: Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). Responsible to adhere to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF). Ensure all products conform to the customer specifications as outlined in SAP system. Perform analysis on raw materials, finished batches, treated water and/or any other programmed outlines by the department. Conduct chemical and physical analysis on raw and intermediate processing materials including packaging materials and determine status of materials as acceptable or unacceptable. Evaluate finished products against current standards by performing audits to monitor all aspects of finished product and packaging integrity. Check process control parameters to assure proper equipment application and operation is being maintained by performing secure seal, closure torque, can seam checks, and/or any other requirements required by the customer or the company. Stop any production which may be questionable in terms of Food Safety and immediately alert a member of the management team. Maintain accurate, legible records of all tests and retests performed. Complete all other required reports (work orders, action reports, etc.) in a timely manner. Perform analytical tests required to qualify ingredient batches for production. Perform production line checks at specified intervals. Ensure accurate test results by maintaining proper operation and calibration of laboratory equipment. Maintain laboratory cleanliness at all times. Report all out of specification results to designated leadership. Complete special projects and other reasonable duties as assigned by leadership. Required Skills: Working knowledge of Excel, Word, and SAP preferred. Exposure to using measurement tools and equipment (e.g., calipers, micrometers, CMM machines) preferred. Organized and detail oriented, adaptable to change. High level of precision and accuracy in inspection and testing processes. Familiarity with SQF, SAP, Six Sigma, GMP, and other relevant standards and regulations Understanding of Food Safety Requirements. Able to read and understand metric system. Food or beverage laboratory experience preferred. Competencies: Technical: Skilled in maintaining accurate and detailed records of inspections and tests Integrity: Commitment to maintaining high ethical standards in all quality assurance activities. Adaptability: Flexibility to adapt to changing production environments and requirements. Communication: Clear and concise communication with production staff and management Education and Experience: Highschool diploma or equivalent. 1 - 3 years of experience in Quality within a manufacturing environment preferred. In plants co-packaging alcoholic beverages, must be at least 21 years old. Working Conditions: Work Schedule: Weekdays, weekends, afternoon, evening, and overnight may be required. Overtime scheduled as needed. Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold (laboratory is temperature controlled). The environment is structured and supervised. Travel Requirements: 0% travel anticipated. A Career with Refresco Refresco Beverages US, Inc. offers competitive pay and comprehensive benefits, which include: Medical/Dental/Vision Insurance Health Savings Accounts and Flexible Spending Accounts Life and AD&D Insurance Pet Insurance Legal Benefits 401(k) Savings Plan with Company Match 12 Paid Holidays, Vacation, and Paid Time Off Well-being Benefits Discount and Total Reward Programs Join Refresco TODAY and enjoy a rewarding CAREER! Any employment agency, person, or entity that submits a résumé to this career site or a hiring manager does so with the understanding that the applicant's résumé will become the property of Refresco Beverages US, Inc. Refresco Beverages, US Inc. will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person, or entity. Third-Party Employment Agency Disclosure Employment agencies that have agreements with Refresco Beverages US, Inc., and have been engaged in a search shall submit a résumé to the designated Refresco recruiter or, upon authorization, submit a résumé to this career site to be eligible for placement fees. EEOC Statement Refresco Beverages US, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification prot

Job DescriptionDescription: Duties & Responsibilities Incoming, in-process and final inspection activities where necessary. Participate in validations (e.g. IQ, OQ, PQ) Support/drive non-conformances including suppliers, internal and customer complaints. Support the documentation control processes. Creates, revises and reviews quality documentation. Work order review, verification and release. Support cleanroom monitoring. Interface with other departments; e.g. manufacturing, warehouse, sales. Read and understand engineering drawings. Familiar with GMP & GDP. Proficient with PC and Office applications. Team player with good written and verbal communication skills. Scope of Power 1. Has a right to: a) Taking independent decision regarding releasing/certification or rejection of medical devices production batches or production batch based on established procedures, obtained testing results, BHR and own experience. b) Taking independent decision regarding releasing/certification or rejection of raw materials and packaging materials for medical devices and manufacturing process. c) Taking independent decision regarding obtained testing results for medical devices. The decisions in this matter are fully independent from the opinion of direct supervisor, the Board of Directors or other person who could influence its decision. 2. Has the right to stop production of nonconforming medical devices. 3. Access to full information and documentation related to the packaging of medical products and the manufacture of medical devices. 4. Access to all areas connected with the process of the manufacturing of medical devices. Education & Skills Experience in quality, preferably within regulated manufacturing environment, ig ISO 13485/FDA QSR College preferred but will accept HS Grad with more than 3 years' experience. Cleanroom and/or packaging experience helpful. Previous involvement in root cause and problem-solving groups. Proficient with PC and Office applications. Requirements: