Quality inspector jobs in Texarkana, TX

The Material Inspector will support the Project Quality team by overseeing material inspection control, documentation, and coordination for a new fabrication facility. This role ensures that all materials meet project specifications, quality standards, and compliance requirements. Key Responsibilities: Conduct inspections on delivered and installed materials per approved submittals and specifications. Review and verify Material Test Reports (MTRs), Certificates of Compliance (CoC), and Mill Test Certificates (MTC). Coordinate material sampling and testing with third-party agencies. Prepare and submit Material Inspection Reports (MIRs) for review and approval. Maintain inspection logs, including pass/fail records and corrective actions. Upload inspection data and documents into the Construction Project Management System (CPMS). Monitor on-site material storage, labeling, and handling practices. Support the issuance and closure of Non-Conformance Reports (NCRs). Collaborate with QA/QC teams, contractors, and client representatives. Qualifications: High school diploma or higher; associate degree preferred. Proficient in Microsoft Office (Excel, Word, Outlook). Strong documentation, reporting, and communication skills. Fluent in English (verbal and written). Preferred Experience: Background in semiconductor or high-tech industrial construction. Familiarity with QA/QC systems and reporting procedures. Bachelor's degree in Engineering, Construction Management, or related field a plus.

Job Title: Distribution Inspector 3Location: Austin, TXKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Ensure all inspections meet or exceed industry regulations and standards. Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. Strong communication skills with the ability to work effectively in a team environment. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

On Site CWI - Quality Control Inspector The On-Site CWI - Quality Control Inspector provides oversite of project site QC activities of self-performed work and monitors subcontracted work activities for a heavy industrial contractor as well as inspecting weld quality, workmanship, and conformance to specifications. Essential Responsibilities * Oversee self-perform work which includes concrete forming, placing, and finishing, structural steel erection and welding, process pipe installation, equipment setting to O&M manuals and various codes. * Monitor subcontracted work which includes rebar installation, masonry wall erection, steel studs and drywall, electrical, TPO roofing and other interior finishes to their applicable building codes. * Provide assistance to the Project Managers and Project Superintendent as needed to ensure that the company's scope of work is built in accordance with the project plans and specifications * Have a good working knowledge of computer systems and be able to learn all programs used by the company to preform QC Tasks * Coordinate 3rd party special inspections as required by the contract documents * Monitor and inspect subcontractor work to ensure compliance with company standards, procedures, and codes when applicable * Coordinate permit inspections as require by city, county, and/or state agencies * Conduct internal/external quality control audits. Define corrective measures for problem areas and insure implementation * Communicate with external quality assurance officers during on-site inspections and meetings * Appraise customers' requirements and ensure they are satisfied * Report all concerns to the Corporate QC Manager, Superintendent, and Project Manager * Maintain Quality Records and assist in developing turnover documents * Facilitate proactive solutions by collecting and analyzing quality data * Review and ensure compliance with current standards and policies * Keep records of quality reports, statistical reviews, and relevant documentation * Ensure all legal standards are met * Attend and participate in weekly QC meetings with the Corporate Office * Perform other duties as assigned by manager and/or as requested by other department members to accomplish team efforts CWI Responsibilities * Conduct Welder performance Qualification Tests for new applicant welders or excise certification on poorly performing welders * Inspects welds for conformity to codes such as D1.1, ASME B31.3, etc. reporting inspection results, and maintaining proper records * Have a knowledge of weld inspection tools/gauges and their applications * Inspect, test, or measure materials, products, installations, or work for conformance to specifications. * Have a thorough understanding of non-destructive testing techniques to in order to adequately supervise 3rd party technicians as they perform nondestructive examinations of welded and machined components. Education and Experience * Must have a minimum five (5) years related construction experience (within the last ten years) as QC/QA Inspector on construction projects of similar magnitude, scope, and complexity as this project * Working knowledge of codes (ACI, ICC, AWS and ASME), ability to determine acceptability and reject ability of work based on assigned criteria * CWI and/or ICC S2 (Structural Steel Welding) Special Inspector preferred, must understand structural welding and weld inspection in accordance with the AWS and AISC codes. ICC S1 (Structural Steel & Bolting) Special Inspectors preferred, must have a working knowledge of structural steel inspection with bolted joints, including the use of a Skidmore and various means of pretension these connections in accordance with the requirements of RCSC and AISC codes * Piping VT Inspector (CWI preferred) - must be able to demonstrate they can meet the requirements (training and experience) of a Level II VT Inspector - must understand pipe welding to the ASME Codes including Section IX, B31.1 and B31.3. Understand weld mapping, when other forms of NDE are required, material traceability, pipe cleanliness, flange management and pressure testing. * Experience in other forms of NDE is a plus but not a requirement. Knowledge / Skills / Abilities: * Ability to identify and resolve complex issues * Excellent listening and professional oral and written communication skills * Must be proactive, use individual initiative, follow assignments through to completion, and be attentive to detail and deadlines * Strong interpersonal skills and proven record as a team player * Ability to perform multiple tasks, and adapt to changing priorities * Strong organizational skills Physical Requirements: * Ability to work at a computer in an office trailer environment. * Ability to work on construction sites which may require: * The ability to climb and maintain body balance on ladders, scaffolding, or high structures; and see and hear well (either naturally or with correction) * Stoop, kneel, crouch, lay, bend or squat and/or crawl as needed * Certified in and proficient with operating Aerial lift on project sites Job Site Working Conditions: * May be exposed to fumes, dust or other airborne particles * May be exposed to loud noises * May work near moving mechanical parts and vibrating machinery * May be exposed to extreme outside conditions that include inclement weather, heat and humidity, and exposure to dust and asphalt Other: * Travel may be required * Overtime, some weekend, and holiday work may be required Robinson Construction is a design-build general contractor completing construction projects throughout the entire United States. Robinson completes projects, large and small, for a variety of specialized markets including commercial/institutional, energy, food & beverage, government/public, healthcare, heavy civil/water, industrial & process, manufacturing, marine, and mining industries. Robinson Construction is an Equal Opportunity/Affirmative Action employer. We will provide equal opportunity to all applicants and prohibit any discrimination because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or veteran status. Applicants are treated on the basis of their job-related qualifications, ability and performance. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Phone: ************ Email: *********** Robinson Construction is an Equal Opportunity and Affirmative Action Employer; including minorities, females, individuals with disability and protected veterans.We participate in E-Verify. If you want to view the EEO is the Law poster, please choose your language:

Inspector (TFE731) Lead Build an Aviation Career You're Proud Of Your work ties us all together, helping our teams function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. As a Lead Inspector, you will oversee the inspection, release and certification of products processed within production areas of the business unit. Responsible for the certification of products and for aligning the inspection group to meet internal and external customer targets. A portion of assigned working hours, will continue to perform hands-on technical work based on existing qualifications attained as a Technician. What you'll do: * Assists Operations Managers with production flow, and planning. * Leads, assigns work to inspectors. Reviews work in process and checks completed work to ensure quality and timely completion of job assignments. * Eliminates ordinary difficulties encountered in regular job assignments. * Demonstrates and encourages a team environment and works with team members to resolve conflicts. * Instructs other employees in the proper method and procedures of performing jobs when required. * Uses production systems to generate production routings, retrieve technical work instructions, document product condition, requisition material, report labor usage, and report product location and production status. * Generates measures of performance (MOP's) and assists with analysis and development of actions. * Provides support and guidance to production team and able to troubleshoot issues/problems. * Works with the Operations Managers to determine cell inspection training requirements, monitors progress to the plan and addresses any gaps. Assists with maintaining the cell skills matrix and iteration tracking. * Provides performance evaluation input to the Operations Managers for inspection team members. * Recognizes and understands flight/product safety critical parts and processes. * Responsible for immediately reporting any flight/product safety concerns. * Participates in pro-active risk analysis of flight/product safety critical parts and processes. * Updates and reports out on cost of poor quality. Leads and participates in identification of root cause and corrective actions. * Activity promotes CI, monitors progress within the cell and assists where required to ensure goals are met. * Acts as the primary liaison with engineering and other production personnel as required to troubleshoot, research, and solve technical problems. * Ensures all applicable safety requirements are followed and address any unsafe practices/conditions immediately. * Performs hands-on technical work based on existing qualifications attained as Detail and/or Quality Inspector. Position Requirements: * Minimum 5 years of experience. * Qualified in the detail and/or quality inspection functions. * Knowledgeable in the configuration and assembly of the products processed in the cells. * Knowledgeable in the assembly methods and techniques used. * Proficient in the use of precision measuring instruments. * Proficient in dimensional inspection techniques. * Demonstrated knowledge of the applicable regulatory requirements relating to maintenance of aeronautical products. * Knowledgeable on the documentation completion requirements. * Knowledgeable in the quality requirements relating to the production process. * Proficient in decision making to ensure compliance to all customers, regulatory and company requirements. * Proficient in communication skills. * Ability to guide and train other levels of technicians. * Expertise with technical documents and manuals including, but not limited to company instructions, company processes, overhaul manuals, service bulletins and OEM manuals. * Must be able to read and interpret technical manuals, instructions, blueprints and drawings. * Must be proficient in the use of tools, PME, and instruments necessary for the accomplishment of job duties. * Must have an understanding and working knowledge of hazardous material handling and disposal. * Strong planning, organizational, analytical, interpersonal, oral and written communication skills. * Must have demonstrated ability to use good judgment and make sound decisions. * Must be authorized to work in the U.S. Preferred Characteristics: * Must possess leadership qualities to include demonstrated ability to cooperate and work well with others. * Must have ability to perform high quality of work in a reasonable length of time, lead and direct the work of others. * Highly proficient with in depth knowledge of products, processes and technical functions within the production cells. * Working knowledge of production management computer system and other related internal control systems. * Regularly required to sit for prolonged periods. Benefits that make life better: * Comprehensive Healthcare * 401(k) with 100% company match; up to 5% vested * Paid Time Off starting on day one * Bonus opportunities * Health- & Dependent Care Flexible Spending Accounts * Short- & Long-Term Disability * Life & AD&D Insurance * Learning & Training opportunities #LI-GH1

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. Assists in other branch duties as assigned related to back office support and housekeeping. Performs other duties as assigned. Qualifications Education and Experience High School or equivalent (Required) 6 months to 2 years of transferrable industry experience (Prefered) Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications Valid Driver's License (Required) Transportation Worker Identification Credential (TWIC) (Preferred) Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities Continues to gain knowledge and expertise in the profession (Required) Uses existing procedures to solve routine or standard problems (Required) Has no discretion to vary from established procedures by performing structured work assignments (Required) Language Skills: English - Basic level (Required) Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) Reasoning Skills/Abilities: Intermediate level (Required) Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) Ability to work independently with minimal or no supervision (Required) Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job Stand: Frequently Move or traverse: Frequently Sit: Occasionally Use hands: Constantly Reach with hands and arms: Frequently Climb or balance: Frequently Stoop, kneel, crouch or crawl: Frequently Talk/hear: Constantly Taste/Smell: Occasionally Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR 37Kj2rQIwS

Job Description QA Tech Responsibilities: Monitoring Haccp, GMP's compliance. Follow up about any deficiencies with the manager. Add a hold tag to rejected products/ inspect rejected products make sure everything was corrected. Making sure standards are being met. QA Tech Skills: Intermediate computer skills. Verbal and written communication, Be able to stand in a hot or cold environment. enforce policies and programs. attention to detail, multitasking, knowledge of quality standards.

Job Title: Distribution Inspector 3Location: Rio Grande Valley Service Area/El Paso Service AreaKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Ensure all inspections meet or exceed industry regulations and standards. Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. Strong communication skills with the ability to work effectively in a team environment. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Inspector (TFE731) Lead Build an Aviation Career You're Proud Of Your work ties us all together, helping our teams function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. As a Lead Inspector, you will oversee the inspection, release and certification of products processed within production areas of the business unit. Responsible for the certification of products and for aligning the inspection group to meet internal and external customer targets. A portion of assigned working hours, will continue to perform hands-on technical work based on existing qualifications attained as a Technician. What you'll do: Assists Operations Managers with production flow, and planning. Leads, assigns work to inspectors. Reviews work in process and checks completed work to ensure quality and timely completion of job assignments. Eliminates ordinary difficulties encountered in regular job assignments. Demonstrates and encourages a team environment and works with team members to resolve conflicts. Instructs other employees in the proper method and procedures of performing jobs when required. Uses production systems to generate production routings, retrieve technical work instructions, document product condition, requisition material, report labor usage, and report product location and production status. Generates measures of performance (MOP's) and assists with analysis and development of actions. Provides support and guidance to production team and able to troubleshoot issues/problems. Works with the Operations Managers to determine cell inspection training requirements, monitors progress to the plan and addresses any gaps. Assists with maintaining the cell skills matrix and iteration tracking. Provides performance evaluation input to the Operations Managers for inspection team members. Recognizes and understands flight/product safety critical parts and processes. Responsible for immediately reporting any flight/product safety concerns. Participates in pro-active risk analysis of flight/product safety critical parts and processes. Updates and reports out on cost of poor quality. Leads and participates in identification of root cause and corrective actions. Activity promotes CI, monitors progress within the cell and assists where required to ensure goals are met. Acts as the primary liaison with engineering and other production personnel as required to troubleshoot, research, and solve technical problems. Ensures all applicable safety requirements are followed and address any unsafe practices/conditions immediately. Performs hands-on technical work based on existing qualifications attained as Detail and/or Quality Inspector. Position Requirements: Minimum 5 years of experience. Qualified in the detail and/or quality inspection functions. Knowledgeable in the configuration and assembly of the products processed in the cells. Knowledgeable in the assembly methods and techniques used. Proficient in the use of precision measuring instruments. Proficient in dimensional inspection techniques. Demonstrated knowledge of the applicable regulatory requirements relating to maintenance of aeronautical products. Knowledgeable on the documentation completion requirements. Knowledgeable in the quality requirements relating to the production process. Proficient in decision making to ensure compliance to all customers, regulatory and company requirements. Proficient in communication skills. Ability to guide and train other levels of technicians. Expertise with technical documents and manuals including, but not limited to company instructions, company processes, overhaul manuals, service bulletins and OEM manuals. Must be able to read and interpret technical manuals, instructions, blueprints and drawings. Must be proficient in the use of tools, PME, and instruments necessary for the accomplishment of job duties. Must have an understanding and working knowledge of hazardous material handling and disposal. Strong planning, organizational, analytical, interpersonal, oral and written communication skills. Must have demonstrated ability to use good judgment and make sound decisions. Must be authorized to work in the U.S. Preferred Characteristics: Must possess leadership qualities to include demonstrated ability to cooperate and work well with others. Must have ability to perform high quality of work in a reasonable length of time, lead and direct the work of others. Highly proficient with in depth knowledge of products, processes and technical functions within the production cells. Working knowledge of production management computer system and other related internal control systems. Regularly required to sit for prolonged periods. Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Health- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities #LI-GH1

Petroleum Inspector - II Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours Sitting Weight N/A-Duration/Day Up to 6 hours Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Camin. All rights reserved.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions * Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. * Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. * Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. * Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. * Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. * Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. * Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. * Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. * Assists in other branch duties as assigned related to back office support and housekeeping. * Performs other duties as assigned. Qualifications Education and Experience * High School or equivalent (Required) * 6 months to 2 years of transferrable industry experience (Prefered) * Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications * Valid Driver's License (Required) * Transportation Worker Identification Credential (TWIC) (Preferred) * Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) * International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities * Continues to gain knowledge and expertise in the profession (Required) * Uses existing procedures to solve routine or standard problems (Required) * Has no discretion to vary from established procedures by performing structured work assignments (Required) * Language Skills: English - Basic level (Required) * Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) * Reasoning Skills/Abilities: Intermediate level (Required) * Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) * Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) * Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) * Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) * Ability to work independently with minimal or no supervision (Required) * Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) * Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills * MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job * Stand: Frequently * Move or traverse: Frequently * Sit: Occasionally * Use hands: Constantly * Reach with hands and arms: Frequently * Climb or balance: Frequently * Stoop, kneel, crouch or crawl: Frequently * Talk/hear: Constantly * Taste/Smell: Occasionally * Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

JOB REQUIREMENTS: Must have high school diploma or equivalent Individual must be able to read and write English Must have good math skills Must have good attendance Must be able to work safely Must be dependable Knowledge of Excel, Power point, and Microsoft Word preferred. Must have good leadership skills and be able to deal with all types of work situations. Previous experience in the poultry industry is preferred Must be able to work shift assigned when needed Individual must have good communication skills and able to work well with others Individual must be able to work without close supervision Individual must have good reasoning skills EOE, including disability/vets

Job Title: Distribution Inspector Level 3Location: El Paso, TXDuration: Long TermDescription:· Must be able to monitor work performed by contractors hired by Company on gas pipeline and service installations, replacements, and relocations within Company's service area. · Work shall be performed in accordance with Company standards and 49 CFR 192· Oversee transmission projects, ensuring the integrity, safety, and compliance of pipelines. Qualifications:· Minimum of 6 years of hands-on experience in pipeline inspection, with a specialized focus on poly fusion projects. · Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, TVC, and ONE MAP. · CPWI· API 1169· Identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. · Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionPetroleum Inspector - II Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours Sitting Weight N/A-Duration/Day Up to 6 hours Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Camin. All rights reserved.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. Assists in other branch duties as assigned related to back office support and housekeeping. Performs other duties as assigned. Qualifications Education and Experience High School or equivalent (Required) 6 months to 2 years of transferrable industry experience (Prefered) Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications Valid Driver's License (Required) Transportation Worker Identification Credential (TWIC) (Preferred) Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities Continues to gain knowledge and expertise in the profession (Required) Uses existing procedures to solve routine or standard problems (Required) Has no discretion to vary from established procedures by performing structured work assignments (Required) Language Skills: English - Basic level (Required) Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) Reasoning Skills/Abilities: Intermediate level (Required) Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) Ability to work independently with minimal or no supervision (Required) Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job Stand: Frequently Move or traverse: Frequently Sit: Occasionally Use hands: Constantly Reach with hands and arms: Frequently Climb or balance: Frequently Stoop, kneel, crouch or crawl: Frequently Talk/hear: Constantly Taste/Smell: Occasionally Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

Job Title: Natural Gas Distribution Inspector Level 2Location: South East, TXKey Responsibilities:Conduct comprehensive inspections of pipelines, focusing on line extensions and rebuild services, to guarantee compliance with industry standards and regulations.Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping.Collaborate closely with engineering teams to develop effective inspection strategies and contribute to the planning of line extension projects and rebuild services.Provide technical expertise to support decision-making processes related to pipeline maintenance, repair, and replacement.Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:Minimum of 2-4 years of hands-on experience in pipeline inspection, with a focus on line extensions and rebuild services.In-depth knowledge of pipeline construction, maintenance, and repair processes, particularly related to line extensions and rebuild projects.Familiarity with industry-specific software and tools.Strong analytical skills and attention to detail, with the ability to identify and assess potential issues in pipelines.Excellent communication skills with the ability to work within a team. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.