Quality inspector jobs in Texas

1. Perform in-process and final inspections on fabricated parts, weldments, assemblies, and structural components. 2. Verify dimensions using calipers, micrometers, gauges, tapes, weld gauges, and other precision measuring tools, prepare reports. 3. Review and interpret engineering drawings, welding symbols, fabrication standards, and customer specifications. 4. Review NDE reports, prepare ncr when necessary. 5. Ensure products meet quality standards, customer requirements, and regulatory codes. QUALIFICATIONS: 1. High school education or equivalent. 2. Ability to use appropriate measuring and test equipment. 3. Product familiarity working in a similar environment. TRAINING REQUIRED: 1. Strong attention to detail, accuracy and problem solving skills. Ability to read and interpret engineering drawings and specifications. 2. Performing dimensional inspections. 3. Experience with NDT methods. (VT, MT, PT) 4. Experience working with ITPs, MTRs and fabrication quality documentation PPE AND SAFETY: 1. Follow all shop safety policies, including PPE requirements. 2. Reasonable accommodations are made to enable

MTU Maintenance Fort Worth is part of the world's largest independent jet engine MRO company based in Germany providing aftermarket and OEM-licensed engine maintenance services worldwide. As a part of MTU Aero Engines, with over 80 years of experience in the design, development, and production of jet engine components, modules, and engines; MTU Maintenance is a global network of over 4,000 employees with over 35 years of experience in the MRO market. MTU provides maintenance from targeted hospital visits to complete overhauls on over 30+ commercial aero engine and industrial gas turbine lines and has completed more than 18,000 shop visits for over 1,400 customers worldwide. Within this Global network, MTU Maintenance Dallas provides hospital shop and on-site maintenance services. Aviation Engine Quality Control Inspector The Aviation Engine Quality Control Inspector will report to the Quality, Safety, Engineering Manager via the Lead Inspector. Quality Control Inspectors review all procedures, equipment, and systems on an engine to ensure it meets federal safety regulations. They examine maintenance records to verify all maintenance has been performed and investigate incidents and complaints to determine causes. Duties/Responsibilities: * Inspectors must always maintain proper part 65 certification for their current assignment. * Oversee the quality control processes to ensure that maintenance and repair work meets the required standards set forth in the Repair Station Quality Manual. * Conduct historical and AD/ASB research for customer engines. * The inspector will be responsible for the inspection of engines, engine parts, sub-assemblies, and accessories in accordance with FAA approved technical data or instructions. This includes but is not limited to Receiving, In-Process and Final Inspections. * The inspector will perform complete inspection of components, sub-assemblies, and assemblies, using approved types of measuring instruments, and inspection equipment. * The inspector is responsible for verifying the execution, inspection, and successful completion of the work performed. The inspector should ensure all work scope instructions, quality and regulatory requirements are complied with. * All inspection personnel must maintain proficiency in the use of various types of inspection aids, tools and gages routinely used for inspection of each item undergoing inspection. * Maintain detailed records of maintenance activities, including inspections, repairs, and parts replacements in compliance with regulatory requirements. Complete maintenance logbooks and documentation accurately. * The inspector must ensure that all calibrated tools have current calibration and consumable materials being used are within their listed shelf life and have not expired. * Assist in the conduct of investigations into incidents or discrepancies in maintenance procedures, identify root causes, and implement corrective actions to prevent recurrence. * To ensure compliance to the applicable title 14 CFR parts, inspection personnel are required to be thoroughly familiar with all inspection methods, techniques, and equipment used in their area of responsibility to determine the quality of airworthiness of an article undergoing maintenance, repair, or alteration. * Inspection personnel must remain current on requirements and how to find data contained in 14 CFR Parts 1, 43, 65 and 145. The maintenance being performed may be controlled by the requirements of 14 CFR Parts 91, 121, 125, 135, and all maintenance must be accomplished per the operator's program requirements. * Perform other duties as may be directed by the Quality, Safety, Engineering Manager, Chief Inspector or Lead Inspector. Required Skills/Abilities: * Demonstrated interpersonal skills in working and communicating effectively with all levels in the organization. * Exceptional organizational skills and attention to detail. * Problem-solving mindset and a proactive, creative approach to challenges. * Demonstrated proficiency with Microsoft Office, Web applications, and general technical data, including ESM, AMM, SB's. * Bachelor's degree in aviation or a related field preferred but not required. Previous experience in lieu of a degree is possible. * FAA Airframe and Powerplant (A&P) certification preferred, Powerplant required. * Prior experience with engine maintenance, engine changes, engine inspections and module removal & installation required. * Must be able to sit at a desk and work on a computer. * Must be able to lift up to 40 pounds at times. Benefits: * Medical, Dental, Vision, and STD insurance are effective immediately * Medical Flexible Spending Accounts * Employer-paid LTD and Life / AD&D insurance * 401k with employer matching up to 2% with an additional discretionary contribution to 1% provided from the employer * Paid 2 weeks of Vacation, paid 10 days of PTO & Holidays * Annual Tuition Reimbursement * Monthly $30 Gym Membership Reimbursement * Passport and renewal compliance, and TSA reimbursement * Employee Assistance Program Your Future at MTU Starts Here! Ready to give your career a boost? Send us your complete application by listing your earliest possible start date. We look forward to getting to know you. MTU Maintenance Dallas, Inc. is an Equal Opportunity Employer. All applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity, or any other protected class. For more information and additional resources on "EEO is the Law," please visit: ****************************************

Job Title: Natural Gas Distribution Inspector Level 2Location: South East, TXKey Responsibilities:Conduct comprehensive inspections of pipelines, focusing on line extensions and rebuild services, to guarantee compliance with industry standards and regulations.Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping.Collaborate closely with engineering teams to develop effective inspection strategies and contribute to the planning of line extension projects and rebuild services.Provide technical expertise to support decision-making processes related to pipeline maintenance, repair, and replacement.Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:Minimum of 2-4 years of hands-on experience in pipeline inspection, with a focus on line extensions and rebuild services.In-depth knowledge of pipeline construction, maintenance, and repair processes, particularly related to line extensions and rebuild projects.Familiarity with industry-specific software and tools.Strong analytical skills and attention to detail, with the ability to identify and assess potential issues in pipelines.Excellent communication skills with the ability to work within a team. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Inspector (TFE731) Lead Build an Aviation Career You're Proud Of Your work ties us all together, helping our teams function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. As a Lead Inspector, you will oversee the inspection, release and certification of products processed within production areas of the business unit. Responsible for the certification of products and for aligning the inspection group to meet internal and external customer targets. A portion of assigned working hours, will continue to perform hands-on technical work based on existing qualifications attained as a Technician. What you'll do: Assists Operations Managers with production flow, and planning. Leads, assigns work to inspectors. Reviews work in process and checks completed work to ensure quality and timely completion of job assignments. Eliminates ordinary difficulties encountered in regular job assignments. Demonstrates and encourages a team environment and works with team members to resolve conflicts. Instructs other employees in the proper method and procedures of performing jobs when required. Uses production systems to generate production routings, retrieve technical work instructions, document product condition, requisition material, report labor usage, and report product location and production status. Generates measures of performance (MOP's) and assists with analysis and development of actions. Provides support and guidance to production team and able to troubleshoot issues/problems. Works with the Operations Managers to determine cell inspection training requirements, monitors progress to the plan and addresses any gaps. Assists with maintaining the cell skills matrix and iteration tracking. Provides performance evaluation input to the Operations Managers for inspection team members. Recognizes and understands flight/product safety critical parts and processes. Responsible for immediately reporting any flight/product safety concerns. Participates in pro-active risk analysis of flight/product safety critical parts and processes. Updates and reports out on cost of poor quality. Leads and participates in identification of root cause and corrective actions. Activity promotes CI, monitors progress within the cell and assists where required to ensure goals are met. Acts as the primary liaison with engineering and other production personnel as required to troubleshoot, research, and solve technical problems. Ensures all applicable safety requirements are followed and address any unsafe practices/conditions immediately. Performs hands-on technical work based on existing qualifications attained as Detail and/or Quality Inspector. Position Requirements: Minimum 5 years of experience. Qualified in the detail and/or quality inspection functions. Knowledgeable in the configuration and assembly of the products processed in the cells. Knowledgeable in the assembly methods and techniques used. Proficient in the use of precision measuring instruments. Proficient in dimensional inspection techniques. Demonstrated knowledge of the applicable regulatory requirements relating to maintenance of aeronautical products. Knowledgeable on the documentation completion requirements. Knowledgeable in the quality requirements relating to the production process. Proficient in decision making to ensure compliance to all customers, regulatory and company requirements. Proficient in communication skills. Ability to guide and train other levels of technicians. Expertise with technical documents and manuals including, but not limited to company instructions, company processes, overhaul manuals, service bulletins and OEM manuals. Must be able to read and interpret technical manuals, instructions, blueprints and drawings. Must be proficient in the use of tools, PME, and instruments necessary for the accomplishment of job duties. Must have an understanding and working knowledge of hazardous material handling and disposal. Strong planning, organizational, analytical, interpersonal, oral and written communication skills. Must have demonstrated ability to use good judgment and make sound decisions. Must be authorized to work in the U.S. Preferred Characteristics: Must possess leadership qualities to include demonstrated ability to cooperate and work well with others. Must have ability to perform high quality of work in a reasonable length of time, lead and direct the work of others. Highly proficient with in depth knowledge of products, processes and technical functions within the production cells. Working knowledge of production management computer system and other related internal control systems. Regularly required to sit for prolonged periods. Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Health- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities #LI-GH1

We are currently seeking a Sequencing Inspector Team Members for the 1st shift(6am-2pm) at our Arlington, TX facility. (1 position available) Our Sequencing Inspector Team Members are key components of our organization. Team Members are expected to inspect all parts before parts are shipped to GM. Team Members must maintain a safe and clean work environment by complying with procedures, rules, and regulations. General Job Duties: Perform receiving inspection activities on supplier parts. Document and file results of receiving inspection activities. Create and manage Quality Notices (complaints) for suppliers. Generate supplier scrap reports and debit memos. Prepare Return to Vendor (RTV) memos. Track and document cost recovery trends. Organize and file rejection, scrap, and cost recovery information. Support manufacturing departments with containment and inspection of supplier parts. Adhere to all safety protocols, including LOTO and PPE requirements. Identify and address quality issues effectively. Demonstrate strong problem-solving skills and prioritize tasks to meet customer requirements. Exhibit teamwork skills and actively participate in a positive work environment. Contribute to continuous improvement initiatives and lean manufacturing efforts. Assist operations in achieving daily production goals and departmental objectives. Conduct daily process audits based on product audit schedules and requirements. Create Quality Alerts and ensure proper communication flow. Participate in containment activities. Work overtime as needed in accordance with company policy. Perform all assigned tasks according to SOPs, safety alerts, and quality alerts. Other duties as assigned. Education Requirements High school diploma or GED. IAC Perks: 401(k) Health, Dental and Vision Insurance Paid time off Company events Employee Assistance Program (EAP) Career growth opportunities Looking for a next-level career? Apply today!

Essential Duties & Responsibilities: Responsible for interpreting ASME and similar industry codes. Responsible for following established quality procedures and processes. Perform inspections of purchased parts, assemblies and finished company products. Able to read and interpret P&ID and PFD drawings as required. Able to use machine tools and precision inspection instruments to determine compliance with drawing tolerances. Able to inspect and determine acceptability of units and assemblies under pressure tests (hydrostatic, snoop-leak and pneumatic). Inspects surface preparation and coatings/linings; Able to use surface preparation standards and blast comparators and DFT gauges to determine compliance with drawing tolerances. Reject and disposition subassemblies or finished products as required. Work with shop personnel for accuracy and completion of shop documentation. Prepare, maintain, and approve required quality documentation and inspection records. Work with vendors to ensure quality of purchased parts for company use. May provide Quality interface with customers and third party inspectors. May direct workers engaged in inspection and testing activities. May provide QC inspections and supervision at vendor/subcontractor locations. Required Skills or Tools: High school diploma or equivalent NACE level I or II preferred Minimum of 5 years of experience in quality control inspection Ability to read and interpret blueprints and technical documents Ability to read, write, speak and understand basic English, Spanish Bilingual a plus Computer literate in basic computer applications (email, MS applications, etc.) Must have working knowledge of various industry codes and local regulations, ASME, AWS, NACE, API, etc. Familiarity with ASME requirements as they apply to pressure vessels and process piping testing.

AMERISPEC INSPECTION SERVICES IS INTERESTED IN HIRING THE NEXT GREAT INSPECTORS IN EAST TEXAS & LOUISIANA! Do you have what it takes to be that person? AmeriSpec Inspection Services is looking to hire Full Time Professional Inspectors. About AmeriSpec: We are a family owned and locally operated company that provides quality inspection services for our clients here in East Texas and Louisiana. We are committed to providing our staff the training, knowledge, and tools needed to be successful in the field while providing the excellent service that our clients demand. Essential Duties and Responsibilities: include the following. This position independently completes home inspections and ancillary services from start to finish. Other duties may be assigned. Attend annual regional AmeriSpec conferences Experience in Remediation, Water Damage, Trades, and/or an allied craft a plus Experience in writing protocols a plus Valid Driver's License and clean driving record Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Willingness to maintain records and communicate with Marketing Manager and Office Manager about job tasks Willingness to perform onsite educational seminars for real estate agents and other local professionals Willingness to comply with the State of Texas and governing agencies for licenses held Willingness to comply with the State of Louisiana Home Inspector Laws & Regulations and gain licensing in that state Perform other related duties as assigned Assist in marketing efforts as directed by a Marketing Representative Possess good communication skills and good computer skills Develop and maintain alliances with successful area real estate agents Work closely with Owner and/or Senior Inspectors to learn the essentials of Commercial & Home Inspections along with Mold Assessments and Protocols Independently perform home inspections from start to finish Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with little to no supervision. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Bachelor's Degree or equivalent from four-year college or technical school; or six months to one year experience as an AmeriSpec Associate Inspector; Completion of state requirements by an approved TREC provider; or equivalent combination of education and experience. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Certificates, Licenses, Registrations: Must be TREC licensed and willing to be licensed in the State of Louisiana Must comply with applicable state licensure requirements and continuing education Must be willing to receive ongoing training and licensing for our ancillary services that we offer Other Skills and Abilities: Good communication skills Ability to work independently Ability to learn new information Ability to learn new skills Relationship building Time management Organizational skills Mentoring and coaching skills Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls. The employee is also regularly required to talk and/or listen. The employee is frequently required to stand, to walk, and to reach with hands and arms. The employee is occasionally required to sit, climb or balance, stoop, kneel, crouch, or crawl and to smell. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; extreme cold; extreme heat; risk of electrical shock and risk of radiation. The noise level in the work environment is usually moderate. Travel: This position requires extended periods of travel time, to and from job locations and areas where continuing education may be required. Inspectors are required to maintain cleanliness of personal vehicles at all times. Fuel expenses will be reimbursed. Benefits Career Advancement Opportunities Flexible Scheduling Great Work Environment Sick Time, PTO, and Health Benefits Plan AmeriSpec Inspection Services is an Equal Opportunity Employer Compensation: $20.00 - $24.00 per hour AmeriSpec offers the best training in the industry by combining classroom instruction, in-field inspections and hands-on technical training in our state-of-the-art facility, led by instructors with over 30 years of experience. A replica of a home, as well as a host of training aids such as a roof, water heater, plumbing, electrical panel and appliances are utilized during training. It is specifically designed for AmeriSpec business owners and inspectors and illustrates what to examine when performing a quality home inspection. Parts of the house are fully functional, such as the kitchen and indoor lighting. In addition, used water heaters, furnaces, and air conditioning units are brought into the classroom, giving inspectors the opportunity to examine these important home systems and components. This innovative facility includes a combustion safety simulator/residential pressure diagnostic tool. This provides AmeriSpec business owners and inspectors with the training needed to make them the best in the industry. Interested in a career with AmeriSpec? Please review our open positions using the filters above. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to AmeriSpec Corporate.

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-IF1

Job DescriptionBenefits: 401(k) 401(k) matching Bonus based on performance Dental insurance Health insurance Paid time off At SI Utility, our Quality team is the final safeguard ensuring every fabricated steel pole, cross arm, and bracket leaving our facility meets exacting engineering and customer standards. Were looking for a QC Inspector who takes pride in precision, consistency, and craftsmanship. If you have a sharp eye for detail and a passion for quality, this is your opportunity to play a vital role in producing essential infrastructure that keeps communities connected. What Youll Do Inspect tapered steel pole sections, arms, and components to ensure dimensional accuracy, weld quality, and drawing compliance. Verify straightness, sweep, and camber using precision tools and measurement methods. Review and document compliance with AWS D1.1 welding standards and ASTM A123/A153 galvanizing specifications. Perform final dimensional and visual inspections prior to product release. Complete inspection reports, nonconformance records, and maintain traceability within the ISO 9001:2015 QMS. Collaborate closely with Production, Engineering, and Project Management to identify and correct issues before they reach the customer. What You Bring High school diploma or GED required; technical training preferred. 3+ years of experience in steel fabrication inspection, NDE, or related QC work. Familiarity with AWS D1.1, ASTM A123/A153, and fabrication drawings. Ability to interpret blueprints, weld symbols, and BOMs with precision. ASNT Level I or II certification (UT/MT/PT/VT) preferred. Exceptional attention to detail, communication skills, and accountability. What We Offer Competitive hourly pay and overtime opportunities. Biannual performance-based bonuses. Full benefits package including medical, dental, vision, 401(k) with match, company-paid short- and long-term disability, and a $10,000 life insurance policy. A strong culture of safety, teamwork, and continuous improvement. Opportunities for career growth in a rapidly expanding manufacturing environment.

ESSENTIAL FUNCTIONS: The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. * Monitoring, observing and Evaluating Maintenance in the COMBs and Safety Procedures * Ensuring Compliance with Procedures * Dealing with Coworkers/Clients/Public JOB DUTIES: Responsibilities may include, but are not limited to: * Monitoring and reporting on COMBS warehouse supply procedures. * Assisting warehouse-receiving clerks in performance of receiving inspections during peak loads. * Investigate and submit items for warranty claims when required. * Accomplishing forms and documentation reviews as required. * Advises management on revising inspection/receiving regulations, as required, to meet contractual requirements. * Preparing discrepancy reports and recommending actions in regard to supplier/vendor material/parts found to be damaged when received. * Accomplishing the functions of the Site Safety and HAZMAT Program Monitor. * Review/Screen aircraft/engine documentation as applicable to T-6 COMBS for possible errors. * Accomplishing site training for new personnel and assisting with training records maintenance. * Monitor and maintain tool calibration and assist with GSB maintenance as needed. * Setting up and maintaining the Technical Library. * Performing QEC installation inspections. * Cleaning of warehouse, shops, offices and restroom as required. * Clerical and other assigned duties as required. QUALIFICATIONS: * Knowledge, Skills, and Abilities (Required Skills include the ability to:) * Familiarity with FAR's relating to aircraft components, parts, hardware, equipment, and Airworthiness Standards (FAR Part 21, 23, and FAR Part 43). * Thorough knowledge of warehouse shipping and receiving procedures. * Ability to communicate effectively, both orally and in writing. * Ability to deal courteously with the customer. * Maintain proficiency in the use of the various types of inspection aids to be used for inspection of the particular items undergoing inspection. * Education and Experience: * Valid FAA Airframe and Powerplant Certificate. * Graduation from a standard four (4) year high school or equivalent (GED) AND a Minimum of FIVE years' recent experience in aircraft maintenance. * Documented proof of aircraft mechanic experience. Benefits include the following: * Healthcare coverage * Retirement Plan * Life insurance, AD&D, and disability benefits * Wellness programs * Paid time off, including holidays * Learning and Development resources * Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

Job Description : For over 75 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions - with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: Process Control & Safety Systems Control Valves & Regulators Isolation Valves & Actuation Oil & Gas Automation Reliability Solutions & Services Pressure Management Specialty Pumps & Rotating Equipment Instrumentation Maintenance & Repair Services Duties and Responsibilities: Inspection & Testing Perform incoming inspections of pressure relief valves to assess condition and identify defects. Verify dimensional accuracy, material specifications, and component integrity after and after repair. Oversee hydrostatic, pneumatic, and functional testing to confirm valve performance. Ensure that all repaired Valves meet all necessary specifications, both physical asset and documentation prior to shipment of the valve to customer; i.e. Final Inspection Repair Oversight Monitor repair activities to ensure adherence to approved procedures and OEM specifications. Validate calibration of tools, gauges, and test benches used in valve repair. Ensure replacement parts meet quality and certification requirements. May communicate with customers directly to discuss specific issues found. Maintain the work area and equipment in a clean and orderly condition. Required to work independent of supervision for after-hours call-outs. Compliance & Documentation Maintain detailed inspection records, test reports, and repair certifications. Ensure compliance with ASME, API, ISO, and other applicable standards. Support audits by regulatory bodies and internal quality teams. Continuous Improvement Identify recurring defects and recommend corrective/preventive actions. Collaborate with technicians and engineers to improve repair processes. Provide training and guidance on quality standards and inspection techniques. Inspects valve and/or actuation assets against inspection forms. Ensures compliance to repair procedures and standards. Initiate non-conformances for assets that fail inspections against inspection forms. Monitor status of open non-conformances and work with Supervisors and Managers to ensure timely action. Escalate Quality Issues to relevant leadership as necessary. Suggest quality and process improvements to leadership. Drive implementation of processes as required. Monitor and report out established KPI's relevant at final inspection, like First Pass Yield % (FPY). QUALIFICATIONS: Education / Experience / Skills Technical diploma or degree in Mechanical Engineering or related field. Minimum 3-5 years of experience in valve inspection, repair, or industrial equipment quality assurance. Strong knowledge of pressure relief valve standards (ASME Section VIII, API 576, NBIC). Proficiency in using precision measuring instruments (micrometers, calipers, gauges). Ability to work non standard hours/after hours. Familiarity with non-destructive testing (NDT) methods is a plus. Strong organizational skills with exceptional attention to detail are required. COMPETENCIES: Ability to safely use and maintain a large variety of tools and equipment, associated with the assembly of relief valves, including impact wrenches, electric and manual hand tools, lapping machines, and overhead cranes and forklifts. Ability to read customer specification sheets and basic dimensional drawings. Ability to read and interpret assembly manuals (i.e. Manufacturers' Spring charts), engineering drawings and technical specifications. Good computer skills. Ability to work independently or as a team member. Ability to work with minimum supervision. Attention to detail and strong analytical skills. Excellent documentation and reporting skills. Strong communication and teamwork abilities. Commitment to safety and regulatory compliance.

As a Quality Inspector, you'' be the focal point for all QA/QC assessment for our Flexible Pipe Systems business. Conducting qualitative risk assessments, root cause analysis and providing corrective actions. Supporting QMS system by creating, editing and reviewing documents to be aligned with global standards. As a Quality Specialist, you will be responsible for: + Inspecting parts, assemblies and subassemblies to required drawings and prints. + Initiating non-conformance reports on all parts and assemblies that are not to drawing and print specifications. + Assuring that manufactured units meet quality control procedures, engineering specifications and customer requirements. + Initiating corrective action requests when conditions adverse to quality are repetitive in nature. + Partnering with manufacturing management and internal process teams to eliminate the causes of quality problems + Completing, inspecting and distributing all quality records and documents and performing specialized testing as required + Verifying tests as required on all components and completed assemblies. + 1 x 12 hour shifts this year to provide 24/7 coverage from Monday to Sunday. + Candidate will start on day shift due to training then move to nights. **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

TITLE : QC Inspector - HRL REPORTS TO: Manager, QC. The QC Inspector is responsible for performing inspection functions in accordance with Global X's Continuous Airworthiness Maintenance Program (CAMP) and FAA regulations. This role ensures that parts, materials, maintenance, and workmanship meet Global X standards, while monitoring performance measures through audits of internal and vendor organizations. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: Perform Line Maintenance, Remain Overnight (RON), and Receiving Inspections (RI). Monitor maintenance, workmanship, and materials for compliance with Global X procedures and FAA standards. Perform RII in-process inspections and ensure proper documentation. Audit completed aircraft records (logbooks, work cards, non-routines, engineering documents, etc.) generated by C-Check, RON, and Line Maintenance. Provide oversight during Heavy or Special Maintenance visits. Perform Borescope inspections within qualified method and level. Ensure accuracy and completeness of all work documents and records. Initiate discrepancies in maintenance logbooks and non-routine forms. Provide “buy-back” of RII and non-RII maintenance actions. Approve return-to-service of maintenance, preventive maintenance, and alterations. Issue Airworthiness Releases (AWR). Reject unsatisfactory work or non-conforming parts per procedures. Prepare and issue audit reports identifying hazards/risks, corrective actions, and track resolution progress. Conduct inspections and audits of contractors/vendors (e.g., repair/overhaul services, contract maintenance, deicing, fueling, and parts distributors). Follow all safety rules to maintain a safe working environment. Perform other duties as assigned by the DOM/DQC. SKILLS AND QUALIFICATIONS: Knowledge of the TRAX system. Valid FAA A&P license, held for at least 5 years. Previous verifiable inspection experience (OJT, training records, certificates, etc.), including RII Authorization. Preferred: prior experience with NDT methods such as Liquid Penetrant, Eddy Current, and Borescope inspections. Strong analytical, problem-solving, and communication skills. Previous experience with aircraft parts and materials handling. WORK LOCATION AND SCHEDULE: This position is based in Harlingen, TX. The standard schedule follows a four-days-on, three-days-off rotation with 10-hour shifts. Work hours and shift assignments may vary, and the schedule is subject to change based on operational needs. Flexibility is required to support the demands of a dynamic aviation maintenance environment. PHYSICAL DEMANDS: The QC Inspector role is performed in a safety-sensitive aviation environment that includes both office settings and aircraft maintenance areas, such as hangars, line stations, and ramp operations. The position requires frequent exposure to varying weather conditions, noise levels, and physical activities associated with aircraft inspections. QC Inspectors must be able to stand, walk, bend, climb, and climb into confined spaces as needed to access aircraft structures and components. The role also involves extended periods of reviewing technical documents and records. Strict adherence to safety protocols and regulatory requirements is essential to maintain a safe and compliant work environment. OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time. Global Crossing Airlines provides equal employment opportunities to all team members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Petroleum Inspector - II Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours Sitting Weight N/A-Duration/Day Up to 6 hours Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Camin. All rights reserved.

Job Description Key Responsibilities: Inspect incoming and outgoing shipments. Perform visual and sensory inspections (color, texture, smell) of fresh produce upon arrival, during storage, and after dispatch. Verify compliance with internal specifications and sanitary regulations. Monitor storage conditions (temperature, ventilation, humidity). Record non-conformities and coordinate corrective actions with logistics, purchasing, or production teams. Prepare daily/weekly quality reports. Document inspection results and input data into warehouse or quality management systems. Maintain accurate logs for temperature checks, inspection reports, and non-conformance issues. Monitor inventory rotation (FIFO) for all perishable categories. Coordinate with warehouse, procurement, and transportation teams to resolve quality concerns quickly. Assist with shelf-life evaluations, product sampling, and QA audits. Manage product returns or rejections that do not meet quality standards. Support staff training in proper handling and quality control practices. Requirements: High school diploma or equivalent. Previous experience in quality control, ideally with perishable or food products. Knowledge of hygiene and food safety standards. Ability to identify product defects, ripeness stages, and quality indicators across different perishables. Attention to detail, responsibility, and ability to work under pressure. Basic knowledge of utilizing a PC and Microsoft Office Suite Capable of lifting 50 lbs and standing for long periods. Preferred Skills: Familiarity with quality control tools and management software. Strong communication and teamwork skills.

Inspects finished products, products being processed, incoming materials, parts, and assemblies, etc., for conformance to company standards. **Primary Job Functions:** + Conduct QC inspections and audits on contract requirements, and other services performed. + Prepares reports, develops quality plans, attends meetings as directed; performs other duties as assigned. + Checks randomly selected samples and verifies accuracy of equipment or process. + Maintains a safe and healthy work environment by following standards and procedures, complying with legal regulations. Accomplishes quality and organization mission by completing related results as needed. + Schedule inspection activities. **Education, Experience and Certification:** **Required: High School Diploma or equivalent** **Required: 2 years of experience with q** **uality control or an equivalent combination of education and experience sufficient to understand technical and process-based aspects of the services we provide.** **Required: OSHA Certification** **Knowledge, Skills, and Abilities:** + Knowledge of OSHA standards, NFPA, Joint Commissioning and safety procedures with skills in conducting accident investigations and safety inspections. + - Basic knowledge of mechanical systems, critical thinking skills, and proficiency with standard testing tools. + - ISO Lead Auditor Certification with a thorough understanding of ISO 9001:2015 standards + - Knowledge of recognized and generally accepted good engineering practice regulations and codes. + Excellent analytical and computer skills, specifically in MS Office Suite. + Strong written and oral communication and presentation skills. + Strong teamwork and interpersonal skills **Financial Responsibilities:** Determine if the role has the authority over budget or revenue. If so, you must describe in what manner in the description box. **Disclaimer:** CBRE Government & Defense Services are thrilled at the opportunity for you to apply for one of our roles. The base salary range for this position is $40,000-$60,000. This position may also be eligible for a wide range of competitive benefits that can include but are not limited to medical, well-being, financial planning and short-term benefits. This description is not intended to be an "all inclusive" list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. The requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT & DEFENSE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE'S AT WILL EMPLOYMENT RELATIONSHIP WITH CBRE GOVERNMENT & DEFENSE SERVICES. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Ameritex Machine and Fabrication is a high mix low volume sheet metal and structural fabrication facility that uses a variety of equipment such as CNC Fiber Lasers, CNC punch presses, CNC press brakes, and tube lasers to support over 19 production and assembly lines. The company serves customers in energy, oil and gas, automotive, electric vehicle, and aerospace. We operate out of a state of the art 100,000 sqft facility in Conroe, Texas. Job Responsibilities \tAddresses daily quality concerns and questions \tTroubleshoots manufacturing problems and quality issues \tWork closely with operation teams to ensure process controls are in place and adequate to meet standard requirements \tEnsure any non-conforming product is properly identified, quarantined and communicated \tExamines material or product for surface defects such as crack, pits, and incomplete welds \tVerifies specified dimensions of product or material \tConduct incoming material inspection, in-process inspection, and final inspection to procedures, specifications, drawings, samples, or illustrations. \tMust be able to follow instructions and work independently \tCleaning, organizing, and setting up workstations \tKitting or grouping required parts per job requirements \tMust be able to easily multitask around the shop. Qualifications \tExperience in manufacturing quality environment \tTooling experience needed \tComputer capable \tAble to stand, walk, squat, move for 8+ each day At least 2 years of college education Work Schedule Though this professional needs to complete his/her work during the standard routine hours, he/she might need to be flexible at times and extend beyond the normal hours to do the work which needs to be completed on a priority basis. $18.00 - $28.00 Hourly

/OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials according to Internal and Customer requirements. The QC inspector will also be responsible for creating and documenting inspection results, taking measurements, and tracking non-conforming product. ESSENTIAL FUNCTIONS Reports to QC Leadperson and/or Supervisor for daily activities and workload. Perform and document dimensional and visual checks of production parts and incoming goods and creating inspection reports to internal and customer requirement. Responsible for notifying Quality Control Leadperson and/or Supervisor, in addition to Manufacturing and Engineering personnel, of non-conforming goods. Inspect customer supplied material, per specified drawings. Inspecting and gathering product documentation, final document packets, material heat reports as required. Inspection of buy-out materials. Make First Article inspection and document inspection results. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminating waste. Maintain 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Leadperson or QC Supervisor. Other Requirements An annual vision examination is required. Must have experience with the use of measuring instruments in the completion of dimensional inspections. (Calipers, micrometers, CMM, Pi tapes, Optical comparators, etc.) Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials and manufactured products. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 2-3 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

The Quality Control Inspector 1 supports the organization in the development, maintenance and execution of a quality control program that will allow the business to continually improve. In addition, the Quality Control Inspector 1 will help ensure that the supply being delivered from vendors and the product being shipped to customers meets the expected standards and specifications. Duties and Responsibilities: Inspect raw materials, machined, welded, and coated parts ordered and received at TEI (TRENDSETTER ENGINEERING, INC) headquarters from vendors and internal machine shop for quality and accuracy. Verify parts received against engineering drawings, specifications, and manufacturing records. Prepare electronic inspection reports for incoming products. Maintain incoming inspection log. Issue, document, and follow up on NCR's. Manage calibrated measuring equipment and certificate log. As necessary, perform other duties, requiring the same level of skill & responsibility. Support any new quality initiatives as required. Be familiar with company HSE (Health, Safety, and Environmental) policies and procedures. Share knowledge & best practice across the company. All other duties as assigned. Qualifications: Associate degree or at least 5 years of previous experience related to quality control inspection, preferably within the oil & gas industry. Advanced skills in dimensional measurement and verification, utilizing all necessary tools. Proficient computer skills and knowledge of Share point and Microsoft 365 required. Ability to demonstrate initiative and assertiveness, plan and organize work in an efficient manner, and work well under stress and time pressures. Strong interpersonal and communications skills, both verbal and written