Quality inspector jobs in Thousand Oaks, CA

About Us Haskel, an Ingersoll Rand Company, is a High-Pressure Technology Solutions. We specialize in Air-Driven Liquid Pumps, Air-Driven Refrigerant Pumps, Hydraulic Drive Compressors, Gas Booster Compressor System, BuTech High-Pressure Valves and Hydrogen Valves Fitting and Tubing. Job Summary This role is responsible for ensuring the quality control cell is actively engaged to meet daily customer demand and production schedule. Performs receiving, in-process and/or final inspection of hardware. Conducts complex inspections as defined by quality/inspection plans or per directions of quality management/engineering. Uses a complete range of precision tools and instruments requiring advanced inspection skills and techniques. Ensures that all gauges/tools used are properly calibrated. Identify accurate and efficient means of inspection techniques. Works with general/minimal supervision. Train and provide directions to the Quality Control team under the supervision of the Quality Control Manager. Responsibilities The Quality Team Lead will inspect products by using a variety of inspection tools/devices, work instructions and computer to perform a series of inspections to correctly verify incoming parts, in-process and completed assemblies. Verify supplier material certifications, including special processes, and ensure compliance with quality/PO requirements. Creates supporting documentation (data books, certificates of conformance, etc…) Support disposition of discrepant materials (MRB) in accordance with appropriate quality procedures and maintain low inventory of on-hold parts. Verifies first articles from suppliers and internal departments. Prepares and processes records and reports to document supplier/operations performance. Qualify supplier components and/or systems for assuring conforming product. Adheres to calibrations system of inspection, measuring and test equipment. Applies Statistical Quality Control techniques as directed. Assist with interpretation of drawings, specifications and quality requirements. Properly process goods for outside processing, investigates and evaluates component parts returned and nonconforming product. The Quality Team Lead provides effective training to the quality control cell and ensures safety and quality standards are always maintained. Work with supervisor to manage and prioritize staffing assignments to ensure customer demand and the production schedule are met. Use basic problem-solving skills to ensure stable operation of the quality control cell. Report problems or concerns with quality, processes, equipment, materials and labor to Quality management. Work closely with support staff such as Purchasing/Planning, Manufacturing Engineering, Production Supervisor, Materials/Warehouse to resolve issues. Observe, maintain, coordinate and complete standard work. Update production metrics and facilitate regular team communication. Identify and support continuous improvement efforts with Quality management. Sustain and drive lean manufacturing and 5S activities. Follow documented policies and procedures as designated by the company's Quality System. Basic Qualifications Ability to read and interpret documents such as safety rules, engineering drawings, operating and maintenance instructions, Material Standards, Quality Plans, Control Plans and Inspection Test Plans. Experience with Microsoft Office (Word, Excel, Outlook). Ability to communicate effectively through oral and written communications. Ability to analyze and solve problems. Ability to work with others collaboratively. Strong organizational skills. Preferred Experience leading teams or projects strongly desired. Quality Control experience. Lean manufacturing and continual process improvement experience. Educational Requirements High School diploma or equivalent Five years + of related experience and a minimum of two leading teams. LIP Eligible Role This position is eligible for the LIP (Local Incentive Plan) of up to 4%. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. At Ingersoll Rand, we think and act like owners - of our business, our communities, our planet, and our health too. The Ingersoll Rand benefits program provides you with the tools and resources to take accountability for your health so that we can continue to help make life better. Benefits of employment and include; Medical and Prescription drug plans Wellness and Chronic disease management programs Dental, vision, life/AD&D insurance Short- and Long-term disability Health Savings Account Flexible Spending Account Parental Leave Employee Assistance Program Discount Program Employee Stock Grant 401k plan with a company match 3 weeks of paid vacation and 11 paid holidays throughout the calendar year Voluntary benefits include legal, accident, and critical illness protection

Job Title: Quality Control Technician Pay Rate: $21 to $23/Hr Duration: 12 Months We are looking for a Quality Control Technician Perform standard quality control testing on incoming raw materials, semi-finished goods, and finished goods according to specifications. Accurately calculate and report test results. Able to locate needed test methods, SOPs, and work instructions in the document management system. Record test data into the SAP database. File and maintain the retain samples; dispose of old retain samples per retention protocols. Maintain a clean working environment, including lab benches, the retain sample room, ovens, and the hood. Participate in Quality Lab 5S activities. Actively participate in daily Quality Lab/department (MOS) meetings. Complete, maintain, and control the required Quality records and/or documents as directed by the department's standard operating procedures. Use proper Good Documentation Practices (GDPs) when recording information. Perform and support validation and calibration of lab equipment, including documenting and reporting equipment issues within the lab. Assist Quality Engineers with complaint investigations and testing samples/reports. Comply with all Health, Safety, and Environmental rules, procedures, and regulations. Support training efforts within the lab and maintain status for all learned test methods and requirements. Proficient in SAP regarding Quality Lab transactions. Also including all responsibilities entailing the upkeep of the Quality Department and any assigned projects determined by the departmental Manager, Supervisor, and Leads. Qualifications: Associate degree in chemistry or equivalent college credit or 3 years minimum technical/lab experience. The Quality Control Technician plays a critical role in ensuring product integrity and compliance by conducting standardized testing and analysis on raw materials, in-process items, and finished goods. This position supports the broader Quality Department by maintaining accurate records, calibrating lab equipment, and contributing to continuous improvement initiatives. The role requires strong attention to detail, proficiency in SAP, and adherence to safety and documentation protocols, while also collaborating with cross-functional teams to uphold quality standards throughout the production process. Experience in Quality Control preferred. Background in materials testing - viscosity testing, melting point testing, and general lab testing. Knowledgeable in the use of laboratory equipment and instruments. Good communication skills - verbal and written. Able to work well in a team environment. Computer literate - MS Office

Job Details 0T534 CA - El Monte, CA Full Time $29.22 - $35.20 Hourly 2nd ShiftDescription Who we are: The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products. Summary: The CMM Quality Inspector by using the Gill Process Documents (i.e.: GPS, GMS, GOS), performs essential duties to meet customer and AS9100 requirements and supports engineers with complex tasks. This position also works on quality-related projects with direction from the Quality Control Manager. Essential Duties and Responsibilities include the following. Other duties may be assigned. Follow company policies and procedures Comprehend and ensure compliance with internal quality documents, and customer specifications Read and understand customer specifications, process standards, drawings (blue prints), ANSI procedures, and industry standards. Coordinate with CNC production to inspect and rework parts in a timely matter. Must be able to setup, program, and operate Coordinate Measuring Machines, both traditional in-place and articulated-arm (Romer) devices. Proficient in reading blueprints, understanding GD&T, and working with associated technical documents. Proficient in the selection of appropriate hand-held and/or surface plate measuring equipment appropriate to the task. Comfortable providing instruction for the development of Inspection employees within the organization. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications and Education (Required) Functionally capable in the use of Microsoft Office and other basic computer software. Ability to comfortably multitask with minimal supervision. Ability to effectively communicate verbally and in writing Acceptable Vision Test results Hexagon Metrology coordinate measuring machine level 1 Working knowledge of PC-DMIS software ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee. The Gill Corporation is an Equal Opportunity Employer . Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances. The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department

Who we are: C.R. Laurence Co., Inc. (CRL) is the leading full-service provider of architectural metals, glass fittings and professional-grade glazing supplies. Offering more than 60,000 products, we serve the industry from locations throughout North America, Europe, and Australia. We operate our business to the highest standards of design, quality and customer service. The companies and institutions that depend on us impact the growing fields of glass fabrication, construction, architecture, interior design, and automotive. Their positions as leaders in their own industries mean they demand the highest standards from their suppliers. About the Position: We are currently searching for an experienced and analytical Quality Inspector to join our production department. As the Quality Inspector, you will uphold the safety regulations of our company and oversee the production process to guarantee that all our products meet quality expectations. The chosen candidate will perform regular product evaluations, record inspection results, and recommend improvements to the production process. To excel in this role, applicants should demonstrate great attention to detail with technical and math abilities. Responsibilities include, but are not limited to: Perform quality assessments on all incoming material from vendors, outgoing products for shipping and customer complaints. Reject all products and material that fail to meet quality expectations. Read drawings, plans and specifications to understand the requirements of the products and services. Perform Inspection and testing acceptance criteria Measure product dimensions examine functionality and compare the final product to the specifications. Recommend improvements to the production process to ensure quality control. Document inspection outcomes by completing detailed reports and performance records. Teach the production team about quality control concerns to improve product excellence Oversee the production process Resolve quality related issues in a timely manner. Control and maintenance of all quality documentation, such as: creation, review, approval, modification, elimination and distribution. Review, disposition and oversee rework of nonconforming product. Recommend Corrective/ Preventive actions to eliminate the causes of actual or potential non Qualification Requirements: A minimum of 1-year experience in a similar role High School diploma or equivalent qualification Certification in quality control is preferred Good math and technical skills Understanding of quality control standards and testing techniques. Basic computer skills (excel & word) Dependable, organized with ability to prioritize effectively Good communication skills Ability to problem solve, multi-task, attention to detail and work independently What CRL Offers You Highly competitive base pay Paid time off 10 Holidays (inclusive of 2 floating holidays) Market competitive 401(k) match Industry-leading medical, dental, and vision benefits Short-term and long-term disability coverage Life Insurance Employee discounts Health and wellness programs A culture that values opportunity for growth, development, and internal promotion Hourly: $21.15 - 26.44 We are excited to be an Equal Opportunity Employer at C.R. Laurence. We are actively seeking job applicants who reflect a broad representation of differences, including race, ethnicity, religion, sex, sexual orientation, gender identity/expression, physical ability, neurodiversity, age, veteran, family and economic status and background, geographical background and status, and perspective. We believe that the best companies reflect the incredible diversity in viewpoints, backgrounds, and identities of the world in their staffs, and are committed to inclusive hiring across departments and levels. C.R. Laurence Co., Inc. (CRL) is an E-Verify Employer.

Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! QUALITY INSPECTOR I/II - MECHANICAL Based out of Rocket Lab's Headquarters in Long Beach, CA the Quality Inspector I/II - MECHANICAL is responsible for carrying out inspections using, but not limited to, prescribed inspection criteria. A high level of attention to detail is needed to detect anything related to the product that does not meet engineering/production standards. In this role you will help prevent faulty hardware from progressing in the manufacturing process and support root cause mitigation and elimination of failure modes. You will support the Quality Manager and Production organization, with deliverables required for internal leadership, board of directors, and investors. WHAT YOU'LL GET TO DO: Perform complex mechanical inspections for purchased parts, 3D-printed components, CNC-machined items, electro-mechanical components, and propulsion assemblies. Perform all types of precision inspections, including receiving, in process and final assembly inspections. This includes capability to effectively use hand measurement systems and CMM. Thoroughly document non-conformance in accordance with Rocket Lab systems and procedures in our internal ERP, MES and Issue tracking system. Collaborate with engineering and management to improve work instructions and identify critical inspection points in the process. Coordinate with Production personnel to prioritize workload and enable the team to meet key delivery milestones. Embody a Built in Quality philosophy, consistently detecting non-conformance (Don't accept a Defect - Don't Pass a Defect) and preventing escapes to downstream customers. (Please note: this position can be hired at the Quality Inspector I or Quality Inspector II level) YOU'LL BRING THESE QUALIFICATIONS AS A QUALITY INSPECTOR I - MECHANICAL: Familiarity with quality assurance practices in a mechanical manufacturing environment. Familiarity with Geometric Dimensioning and Tolerancing (GD&T) principles. High school diploma or GED YOU'LL BRING THESE QUALIFICATIONS AS A QUALITY INSPECTOR II - MECHANICAL: 2+ years of experience working in a quality assurance role in a quality mechanical manufacturing environment. Experience with Geometric Dimensioning and Tolerancing (GD&T) High school diploma or GED THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Experience in space manufacturing in-process environment on engine builds Experience with precision measuring equipment such as comparator, romer arm, Keyence Vision System, and/or CMMs (PC-DMIS) Experience performing visual inspections using borescope High level of experience using hand measuring instruments including calipers, micrometers, depth gauges, feeler gauges, pine gauges, thread gauges, surface roughness measurement, microscope etc Inspection experience with aerospace components & assemblies Experience working with Enterprise Resource Planning (ERP) systems ADDITIONAL REQUIREMENTS: Ability to work one of the following shifts: 5:00AM - 3:30PM Monday- Thursday 3:15PM - 1:45AM Monday - Thursday Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing Must be physically able to commute to buildings Occasional exposure to dust, fumes and moderate levels of noise Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$20-$32 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Quality Control Inspector - Wire and cable harnesses Full-time, in-person On-the-job training Must be able to perform detail-oriented tasks, including inspection and testing. With supervision, perform basic and routine assembly operations on components, and sub-assemblies in accordance with military, aerospace and or other assembly standards using visual aids and verbal written instructions. Core Functions: Advanced Soldering Crimping techniques Connector assembly Understanding of Travels and Drawings Use of cable assembling hand and power tools such as heat guns, hand crimpers, screw drivers etc. Use of rulers and tape measure. Knowledge and experience: Cable/Harness Assembly in Aerospace and Military Applications Ability to Read & Interpret Blueprints, Schematics, Traveler/Routers, Bills of Material & Wire Lists. Basic math and measurements. Fluent English The following is preferred but not required: Experience interpreting design drawings Experience with wire and cable harnesses Familiarity with standard specifications such as IPC/WHMA-A-620, IPC J-STD-001, and NASA-STD-8739.4 Certification to the standards IPC/WHMA-A-620, IPC J-STD-001, and NASA-STD-8739.4 is a big plus. Schedule: M-F 6:00 am-2:30pm.

We are seeking a Quality Control (QC) Inspector to join our team in Santa Fe Springs, CA. This is a Temp-to-Hire position, offering an excellent opportunity to grow within a fast-paced, quality-driven environment. As a QC Inspector, you will be responsible for ensuring that materials, processes, and products meet the highest standards of quality. Key Responsibilities: Perform regular inspections of materials using measurement equipment such as micrometers, calipers, and rulers. Ensure work packets are complete, accurate, and GDP compliant; make corrections as needed. Conduct mathematical calculations required to assist in completing inspections. Maintain a high standard of quality control methodologies and inspection techniques. Work closely with the QC Department and Production teams to resolve any issues and improve processes. Qualifications: Experience: Minimum of 2 years of QC experience, with at least 1 year of experience in the Medical Device, Pharmaceutical, or Aerospace industry. Skills: Proficiency with micrometers, calipers, and other measuring equipment. Certifications: HS Diploma or equivalent; knowledge of ISO 13485 and 17025 standards is a plus (but not a requirement). Independence: Ability to work independently with minimal supervision. Attention to Detail: Strong ability to catch discrepancies and ensure compliance with industry standards. What We Look for in a Candidate: Independent worker with the ability to solve problems autonomously. Strong communication skills, both written and verbal. Team-oriented with the ability to collaborate effectively with internal departments. A keen eye for detail and a passion for quality. A proactive, assertive individual who can handle high-stress situations without compromising on quality.

ABOUT SANISURE SaniSure is a multinational manufacturer of single-use bioprocessing solutions (SUT) used in the production of biological drugs, including monoclonal antibodies, cell therapies, gene therapies, and vaccines. With operations in the U.S. and in Europe, SaniSure operates a leading platform of vertically integrated critical fluid management technologies and integrated solutions. Its single-use products and system solutions are sold to global pharma and biotech companies and are used from R&D through full-scale commercial cGMP manufacturing of among the most innovative large molecule therapeutics and vaccines. This role is expected to be on-site. We continue to be on a robust growth trajectory, via both organic and inorganic growth, as the company capitalizes on increasing global demand and continues its transition from a component manufacturer to an integrated systems and solutions provider. Our primary offering includes high-value assembly solutions and a portfolio of market-leading products, including PharmaTainer bottles and carboys and related assemblies, Mixed4Sure mixing solutions, Flex4Sure bags and bag assemblies, Fill4Sure needles and needle assemblies, fittings, clamps and a wide range of silicone, braided and thermoplastic tubing solutions. The company has a growing portfolio of innovative solutions serving fast-growth applications, such as cell and gene therapies. SaniSure is a high-growth, nimble and innovative company with a strong customer and market focus. Join us and grow your career at SaniSure! SUMMARY : Performs quality control inspections in all aspects of operations, checks, and test during the manufacture of products. Inspect incoming materials, and products at different stages of production. Records observations and make recommendations for improving processes. Shift 7:00 to 3:30 pm. ESSENTIAL FUNCITONS: Responsible for all activities involving quality inspections and compliance with applicable regulatory requirements; Initiate nonconformance reports (NCR). Performs all aspects of testing related to manufacturing. Incoming inspections In-process inspection. Final Inspection release of finished goods. Document review. Supports cross functional departments investigate potential non-conformance's observed Ensures that all inspections and procedures are properly completed and documented. Perform pre and post-inspection of product gamma irradiation process. Approve or reject raw materials with respect to quality standards and communicate results to all pertinent parties. Initiate nonconformance reports (NCR) for all non-conforming material identified throughout operations Prepare and submit Metrics reports to the quality supervisor or QC lead Comply with all safety requirements ensuring work areas meet standards. May be required to report to multiple facilities within a 2-mile radius. Job Order document review and release Other duties as assigned QUALIFICATIONS High School Diploma or equivalent with 2+ years of experience in quality control inspections. Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. Minimum of 0-2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. Solid organizational and planning skills required. Ability to communicate effectively, verbally and in writing, demonstrate good interpersonal skills interdepartmentally and with external vendors and contractors. Must be able to work effectively and efficiently in a team environment. Must have the following personal attributes: integrity and trust, work ethic, sound judgment, intellectual honesty, pragmatism, courage and conviction. Must display personal accountability for results and integrity. Must display eagerness to learn and continuously improve. Must have uncompromising dedication to quality. Good general mathematical skills. General knowledge and use of measuring devices such as calipers, tape measures, rulers, pin gauges Equal Opportunity Employer We are committed to providing equal employment opportunities to all employees and applicants without regard to race, ethnicity, religion, color, sex (including childbirth, breast feeding and related medical conditions), gender, gender identity or expression, sexual orientation, national origin, ancestry, citizenship status, uniform service member and veteran status, marital status, pregnancy, age, protected medical condition, genetic information, disability or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Job Title: Quality Control Inspector II F Reports To: Quality & Process Planning Manager Job Purpose The Quality Control Inspector II is responsible for ensuring that all products meet established quality standards and customer specifications. This role performs inspections, checks, and tests during the manufacturing process, records observations, and recommends improvements. The position requires proficiency with ERP systems to produce quality reports for internal and external use, while supporting company-wide quality initiatives and continuous improvement efforts. Duties & Responsibilities Ensure compliance with all quality check procedures throughout the production process. Perform required physical testing in accordance with Work Instructions. Develop inspection plans aligned with company and customer-specific requirements. Conduct required visual checks and verify masking accuracy against blueprints and purchase orders. Act as subject matter expert for multi-process orders. Approve internal masking with resource owners to prevent process failures. Record inspection data, document pass/fail status, and report rejections with photo evidence as needed. Tag and hold parts for review when disposition is required. Complete logbooks for Copper Sulfate and 24-hour humidity tests. Review Shop Travelers for accuracy, completion, and compliance. Verify packaging instructions are followed before shipment and ensure traceability. Inspect expedited, regular, and rework orders for proper processing. Perform random sampling inspections on large quantity orders. Gather required measurement tools and take photos, sharing findings with customers and production teams. Promote accuracy in job scanning and identify opportunities to improve shop floor efficiency. Utilize ERP software to document corrective actions and prevent recurring quality issues. Educate production staff on quality control issues and support improvement efforts. Assist Quality Engineering and Specialists with troubleshooting and corrective actions. Maintain communication via email and phone as required. Ensure inspection benches are organized and clean; maintain 5S standards and audits. Perform other duties as assigned by management. Qualifications 3-5 years of quality control inspection or related experience. High School Diploma or equivalent required. Basic blueprint reading and interpretation. Proficiency with Microsoft Office Suite and ERP systems. Strong verbal, written, and customer service skills. Experience using measuring tools (meters, gauges, calipers, etc.). Ability to work full-time, including overtime and weekends as needed. Key Competencies Strong verbal and written communication skills. Attention to detail and accuracy. Basic math and analytical skills. Documentation and reporting skills. Hand-eye coordination. Ability to stay organized and maintain good housekeeping practices.

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

THE COMPANY Silvus Technologies is dedicated to one mission: connecting those who keep us safe. We do so by delivering the most advanced Mobile Ad-hoc Network (MANET) radios powered by our custom and ever-evolving Mobile-Networked MIMO waveform. Together, our radios and waveform provide the vital communications for mission critical applications in the harshest environments from underground tunnels to high altitude balloons. Silvus StreamCaster radios are being rapidly adopted by customers all over the world ranging from the U.S Departments of Defense, to International, Federal, State and Local Law Enforcement agencies, all the way to the Super Bowl, Grammys and industry-leading drone, robot, and other unmanned systems manufacturers. Wouldn't you like to join an incredibly talented group of people, doing very challenging work, with the prime directive of “ Keeping Our Heroes Connected ”? Silvus' rapid growth is fueled by a focus on research and innovation and a team of the most passionate, skilled, and creative thinking individuals. If you are looking for a challenging experience, you owe it to yourself to learn how Silvus can provide a rewarding opportunity that creates a pathway to a fulfilling career. THE OPPORTUNITY Silvus is seeking a Quality Control Inspector who will report to the Quality Control Inspection Supervisor on the OQC team. Primary responsibilities will include conducting thorough inspections, maintaining accurate documentation, and ensuring proper procedures are followed for incoming electronic and mechanical parts and during the manufacturing and testing process. This role is also responsible for investigating any quality issues, anomalies, or failures and will work alongside engineering and suppliers to recommend any necessary changes or improvements. This position is fully onsite, Monday through Friday, at Silvus Technologies' HQ in the heart of vibrant West Los Angeles. The following is a list of at least some of the current essential job functions of the position. Management may assign or reassign duties and responsibilities at any time at its discretion. ROLE AND RESPONSIBILITIES Perform and document inspections of products and processes, including electronic cables, GPS devices, Wi-Fi dongles, connectors, mechanical enclosures, shields, and other critical components. Conduct inspections tied to receiving raw materials, parts, components, and fit checks as necessary. Ability to inspect First Article components and subassemblies. Prepare in-process inspection reports, ensuring completeness and accuracy. Maintain Quality documentation. Identify the serviceability of parts and components and appropriate tooling. REQUIRED QUALIFICATIONS High School Diploma or GED required. Minimum 1-3 years of electronic part inspection experience. Proficient experience utilizing inspection tools (i.e., multi-meters, calipers, micrometers, microscopes). Demonstrated proficiency in reading basic schematics, specifically those related to PCBs and PWAs. Read and interpret part documentation, including blueprints, drawings, schematics, etc. Utilize Google Suite, Microsoft Office, and various communication systems effectively. Identify and escalate potential issues. Maintain clear and accurate records and documentation. Must have excellent organizational skills, possess high attention to details, with the capacity to handle numerous tasks simultaneously. Excellent and effective oral and written communication. Must be a U.S. Citizen due to clients under U.S. government contracts. All employment is contingent upon the successful clearance of a background check. PREFERRED KNOWLEDGE SKILLS AND ABILITIES IPC-J-STD 610, 620, or 001. Ability to recognize the importance of processes and procedures and follow them accordingly. Ability to remain flexible and responsive in a fast-paced environment with shifting demands. Effectively evaluate workload and manage competing priorities and deadlines. Proactively recognize challenges or risks and communicate them to the appropriate stakeholders to ensure timely resolution. WORKING CONDITIONS & PHYSICAL REQUIREMENTS Occasional exposure to heat and cold. While performing the duties of this job, the employee is required to do the following: Perform bending and reaching movements to place items on lower and higher shelves. Kneeling or squatting to access lower shelves. Must be able to lift up to 50 lbs. when receiving incoming part shipments. Walking/Moving in the labs. COMPENSATION The pay range is NOT a guarantee. It is based on market research and peer data, and will vary depending on the candidate's experience and qualifications. CA Pay Range$22-$27 USD NOTE - As a U.S. Federal Contractor, Silvus Technologies requires that ALL candidates being considered for employment for any position (regardless of level) MUST be a U.S. Person (permanent resident or citizen). Stricter U.S. Citizen ONLY requirements are needed for some Engineering or R&D roles. This generally does NOT apply to International positions; only job postings for positions located in the U.S. Exceptions will be included in the Required Qualifications section of the posted position. All Employment is contingent upon the successful clearance of a background check. Silvus is proud to be an equal-opportunity employer, and we value diversity. We do not discriminate on the basis of race, color, age, religion or belief, ancestry, national origin, sex (including pregnancy), sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, physical or mental disability, protected veteran status, genetic information, political affiliation, or any other factor protected by applicable federal, state, or local laws. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive benefits and privileges of employment. Please contact us to request accommodation. *Silvus does not accept unsolicited resumes from individual recruiters or third-party recruiting agencies in response to job postings. No fee will be paid to third parties who submit unsolicited candidates directly to Silvus Technologies.

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

About Us Hydrafacial is a global category-creating company focused on bringing innovative products to market and delivering beauty health experiences by reinventing our consumer's relationship with their skin, their bodies and their self-confidence. Every person here is a key player in our success. We are firm believers in making the little things count each day so the big things will follow. If this sounds like you, come check us out! This is the perfect opportunity to work with some of the best leaders in the industry while you gain the global and strategic experience to add to your professional toolbox. Job Description: The Quality Control Inspector - Inspection is responsible for performing inspections and testing activities throughout the manufacturing process to ensure compliance with quality standards. This role includes conducting First Article Inspections (FAI), Incoming Quality Control (IQC) In-Process Quality Control (IPQC), and Final Quality Control (FQC) inspections, and maintaining detailed inspection records. The Quality Control Inspector will collaborate with cross-functional teams to address quality and safety issues and contribute to continuous improvement initiatives. This is an on-site position based in Long Beach, CA and requires on-site presence five days a week. This is a full-time role with a schedule of Monday-Friday, 6:00 AM to 02:30 PM or 7:00 AM to -3:30 PM or 08:00 AM to 04:30 PM. What you'll do: Primary Responsibilities: * Perform inspection and testing activities during First Article Inspections (FAI), manufacturing processes, and Incoming Quality Control (IQC), In-Process Quality Control (IPQC), and Final Quality Control (FQC) inspections. * Generate detailed and accurate inspection data sheets in compliance with current Good Manufacturing Practices (cGMP) and Hydrafacial Quality Management System (QMS) requirements. * Properly document inspections, prepare first article documentation, and compile certification packages. * Conduct product build documentation reviews and end-item data package reviews. * Generate nonconformance reports for discrepancies found during inspection processes. * Utilize conventional inspection tools such as calipers, gauges, etc., to ensure precise measurements. * Ensure all inspection equipment is qualified and calibrated before use. * Interpret engineering drawings and specifications accurately. * Conduct visual inspections to identify defects or non-conformities in products. * Collect and analyze quality data to identify trends and areas for improvement. * Collaborate with cross-functional teams to address quality issues and drive continuous improvement initiatives. * Maintain accurate documentation of inspection results and quality records. * Participate in continuous improvement initiatives to enhance product quality. * Report quality related issues to leads and managers in a timely manner. * Adhere to all company safety procedures and perform job functions in a safe and effective manner. * Performs other duties as assigned What you need to know: Experience/Skills/Education: Required: * High school diploma or equivalent; technical training or certification in quality inspection is a plus. * Minimum of 2-3 years of experience in a quality inspection role within a manufacturing environment. * Proficiency in using conventional inspection tools such as calipers, micrometers, and gauges. * Strong understanding of GDP, cGMP, and QMS requirements. * Ability to read and interpret engineering drawings and specifications. * Experience with generating nonconformance reports and inspection documentation. * Strong analytical and problem-solving skills. * Excellent attention to detail and organizational skills. * Basic understanding of ERP systems, Micro Office, etc. * Ability to work independently, cross train, and collaborate professionally in a team environment. * Experience with handling pallet jacks and other various moving equipment. * Manufacturing environment with exposure to machinery, equipment, and various temperatures. * Requires bending, twisting, heavy lifting, pulling/pushing, standing, sitting, reaching, and walking handling inspection tools for extended periods. * Must adhere to all safety guidelines and wear the required personal protective equipment (PPE). * Must be able to lift and move 50lbs. Desired: * Associate degree or higher in a related field preferred. We mean it when we say you'll LOVE this role. Base Pay : $20.00- $23.00/hour Hydrafacial is proud to be an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, sex, religion, sexual orientation, national origin, gender identity, gender expression, age, disability, genetic information, pregnancy or any other protected characteristic as outlined by color, federal, state or local laws. We are committed to working with and providing accommodation to applicants with physical and mental disabilities. Hydrafacial does not accept unsolicited assistance or resumes/CVs from third party search firms. No fee will be paid in the event a candidate is hired by our company as a result of an agency referral or CV/resume submitted by a search firm to any employee at our company without a valid written search agreement. If we need additional support, we will be sure to reach out directly to one of our preferred providers. Please no phone calls or emails.

Job Description Quality Control Inspector W2 Contract to Hire Long Beach, CA $23/hr + Benefits. Weekly Pay! The Quality Control Inspector plays a key role in ensuring products meet established quality standards throughout the entire manufacturing process. This position is responsible for performing inspections and testing activities-including First Article Inspections (FAI), Incoming Quality Control (IQC), In-Process Quality Control (IPQC), and Final Quality Control (FQC)-while maintaining accurate and detailed inspection records. In this role, you will collaborate with cross-functional teams to resolve quality or safety concerns and contribute to ongoing continuous improvement initiatives. This is a full-time, on-site role based in Long Beach, CA, requiring on-site presence five days a week. Available schedules include: • Monday-Friday, 6:00 AM-2:30 PM • Monday-Friday, 7:00 AM-3:30 PM • Monday-Friday, 8:00 AM-4:30 PM Primary Responsibilities • Perform inspection and testing activities during FAI, IQC, IPQC, FQC, and throughout various manufacturing processes. • Generate accurate, detailed inspection data sheets in alignment with cGMP and Hydrafacial Quality Management System (QMS) requirements. • Properly document inspections, prepare first article documentation, and compile certification packages. • Conduct product build documentation reviews and end-item data package reviews. • Generate nonconformance reports for discrepancies identified during inspections. • Use conventional inspection tools-such as calipers, gauges, micrometers, etc.-to ensure precise measurements. • Verify inspection equipment qualification and calibration prior to use. • Read and interpret engineering drawings and specifications accurately. • Conduct visual inspections to detect defects or non-conformities in products. • Collect and analyze quality data to identify trends and improvement opportunities. • Work closely with cross-functional teams to address quality issues and support continuous improvement initiatives. • Maintain accurate documentation of inspection results and quality records. • Participate in continuous improvement projects to enhance product quality. • Report quality-related issues to leads and managers in a timely manner. • Follow all company safety procedures and perform duties in a safe, effective manner. • Perform other duties as assigned. Required • High school diploma or equivalent; technical training or quality inspection certification is a plus. • 2-3 years of experience in a quality inspection role within a manufacturing environment. • Proficiency with conventional inspection tools such as calipers, micrometers, and gauges. • Strong understanding of GDP, cGMP, and QMS requirements. • Ability to read and interpret engineering drawings and specifications. • Experience generating nonconformance reports and inspection documentation. • Strong analytical and problem-solving skills. • Excellent attention to detail and organizational skills. • Basic understanding of ERP systems and Microsoft Office. • Ability to work independently, cross train, and collaborate professionally in a team environment. • Experience handling pallet jacks and other material-moving equipment. • Comfortable working in a manufacturing environment with exposure to machinery, equipment, and varying temperatures. • Ability to perform physical tasks such as bending, twisting, lifting, pulling/pushing, standing, sitting, reaching, walking, and using inspection tools for extended periods. • Must adhere to all safety guidelines and wear required personal protective equipment (PPE). Desired • Associate degree or higher in a related field preferred. TCWGlobal is an equal opportunity employer. We do not discriminate based on age, ethnicity, gender, nationality, religious belief, or sexual orientation.

Helpmates is looking for an QC Inspector to ensure that all product inspections are performed and meet customer requirements and company standards. Pay Rate: $23 - $28 per hour. Depending on experience Schedule: 3:30 pm - 12:00 pm Must have experience in AS9100 aerospace 3 - 5 years of experience as a Final Inspector and/or Receiving Inspector in a Manufacturing or Aerospace environment Job Duties: Follow quality processes and procedures to perform detailed inspection in receiving, in-process Final inspection to ensure products conform to customer requirements, rejecting and returning unacceptable materials Complete required documentation Perform AS9102 first article inspection and other extensive inspections per specifications Develop and review inspection plans Ensure quality standards are met for all components and assemblies for final acceptance Maintain parts history folders, inspection reports and prints/drawings Calibrate and document hand tools and other inspection equipment Perform hardness and electrical conductivity testing Carries out day-to-day work following the departments continuous improvement plan Promote safety by working in a safe manner at all times May perform other inspections or tests such as Proof test, Pressure test, CMM etc. Establish and maintain good standards of communication and relations with other departments, such as Engineering, Purchasing, Production, Receiving, etc. Perform other duties as assigned by Management such as identification of products Requirements: 3-5 years of experience as a Final Inspector and/or Receiving Inspector in a Manufacturing or Aerospace environment - MUST HAVE Effectively work with mechanical and electronic inspection tools and devices Working knowledge of Geometric and Dimensional Tolerances (GD&T) Working knowledge of mylars, optical comparator, thickness gage and profilometer Knowledge of aerospace specifications, quality codes and standard Knowledge of Six Sigma preferred Able to read blueprints and schematics Must be accurate and detailed with minimum errors Able to work within specific time schedules/deadlines Basic computer skills Work within a team environment Respond with sensitivity to people of diverse perspectives Dependability, excellent attendance, ability to work overtime and other shifts Minimum Education: High school graduate or GED required Associate degree or equivalent training in a related field preferred Certifications/Licenses: Certification in Mechanical Inspection Certification in CMM Inspection Certification in Hardness and EC testing preferred #HSCE

At QIMA, we're on a mission to help our clients make products consumers can trust. Working with over 30,000 global brands, retailers, manufacturers and food growers, we are on the ground wherever products are made. We help businesses secure every step of their supply chain with quality inspections, supplier audits, certifications, and lab testing, all powered by our intelligent digital platform. Our team of 5,000 QIMers (and counting) across 40 offices and laboratories, are united in our shared passion for innovation and integrity, and guided by our QIMA values in the decisions we make every day. We believe in the work we do, and in making a positive difference in the world. Does this sound like something you'd like to be a part of? Our Consumer Goods Division is dedicated to helping brands, retailers and manufacturers worldwide deliver safe, quality and ethically made products to their consumers. Every day at work, our inspectors, auditors, and lab techs use their expertise to help safeguard the products you use every day in your home: from clothes and footwear to toys and baby products, to electronics, appliances, and furniture. Job Description As a Quality Control Inspector, you'll be reporting to an Operations Manager and working as a part of our Operations team. At QIMA, the role of Operations is to deliver our industry-leading services to our clients while ensuring that all the work is performed to the QIMA standard of quality. Your role in this will be to: Check email daily in order to receive inspection documents and guidelines; Attend inspections on time and communicate with supplier in a professional way; Perform the inspection of the merchandise according with company procedures. Supervise the stuffing of the containers according with company procedures; Fulfill inspection reports according with company procedures and time lines. Qualifications Think you have what it takes? First of all, we want someone with: Experience in quality management, especially softlines/ garments/ textiles/ footwear (2 years or more); Knowledge of AQL standards , as well as relevant safety and quality regulations; Good command of English (spoken and written); Great attention to detail and strong professional ethics . Additional Information Does this describe you? Then we want to hear from you as soon as possible! Apply now and we can write the next chapter of the QIMA story together. Note: This position is open to candidates who work as freelancers in Los Angeles.

Meet the Owned Brand division of REVOLVE: REVOLVE is the next-generation fashion retailer for millennial and Generation Z consumers. As a trusted, premium lifestyle brand and a go-to source for discovery and inspiration, REVOLVE delivers an engaging customer experience from a vast yet curated offering of over 45,000 products. Founded in Los Angeles in 2003 by co-CEOs, Michael Mente and Mike Karanikolas, REVOLVE's family of brands includes their luxury offering, FORWARD by Elyse Walker, and a portfolio of 24 owned brands such as Lovers + Friends, Tularosa, NBD and RAYE. The Owned Brand division within REVOLVE is an industry-leading fashion design and production house based in Los Angeles. Leveraging the power of REVOLVE's data driven merchandising, combined with raw creative talent results in an unparalleled ability to identify a specific market niches, developing brands that each have their own identity, designed with a distinct consumer interest and personality in mind. At REVOLVE the most successful team members have the thirst and creativity to redefine fashion retail for the 21st century, making REVOLVE THE leading online retail destination targeted towards Millennial and Generation Z consumers seeking premium fashion. With a team of 1,000 strong, we are a dynamic bunch that are motivated by getting the company to the next level. It's our goal to hire high-energy, diverse, bright, creative, and flexible individuals who thrive in a fast-paced work environment. In return, we promise to keep REVOLVE a company where inspired people will always thrive. Some of the sweetest perks we offer aren't in a typical benefit package like hefty discount on items we carry - as in 50% or more off retail prices, free weekly lunches, and pretty rad company parties. To take a behind the scenes look at the REVOLVE “corporate” lifestyle check out our Instagram @REVOLVEcareers or #lifeatrevolve. Are you ready to set the standard for Premium apparel? Main purpose of the Owned Brands QC Inspector role: This is a full time role for a candidate who can identify the most effective defect recovery process for each item to minimize monetary loss of defective merchandise. He or she will be heavily involved in the QC process through the speccing of garments, evaluation of garments, and providing insight on different garment issues. This is a permanent full time role for a candidate who is able to work in a fast paced, high volume, sku intensive environment while maintaining accuracy. Major Responsibilities: Essential Duties and Responsibilities include the following. Other duties may be assigned. • Accurately spec garments • Document defects into current systems • Comprehend and analyze reports to identify areas of opportunities • Effectively communicate issues to all involved parties • Communicate and interact with all cross functional departments, for pulling, mending, Returns, and any other follow ups as needed • Update QC Tracker, and other relating reports on daily basis • Minimize monetary loss of defective merchandise through defective recovery process • Identify the most effective defect recovery process for each item - RA, Restore, Sellable Defect, Other • Identify defects by inspecting defective apparel • Clearly communicate with Technical Design Team regarding defective and unacceptable merchandise • Travel as needed to the Cerritos location • Complete ad-hoc tasks and assignments as directed by management Required Competencies: To perform the job successfully, an individual should demonstrate the following competencies: • Ability to spec garments • High level of attention to detail and the ability to identify apparel construction flaws • Hands-on approach at recommending “how-to-fix” solutions quickly and efficiently • High level of apparel construction and fabrication knowledge • Strong communication, prioritizing and organizational skills • Ability to take ownership of assigned tasks and meet responsibilities without supervision • Ability to work successfully with any personality type and be a team player • Sense of urgency and ability to maintain performance quality under pressure • Flexible and adaptable to a very fast-paced environment • Must be able and willing to lift and carry up to 10 lbs., perform frequent repetitive finger, hand and wrist motions, as well as, bending, stooping, reaching, squatting, kneeling, pushing, and pulling • Must be able to sit for extended periods of time Minimum Qualifications: • Minimum 5-7 years' experience working in a QA/QC, Production or Warehouse environment required • Computer literate in Excel, Word and Email required • Technical fashion, garment construction and fabrication knowledge preferred Preferred Qualifications: • Bilingual highly preferred; proficient in English A reasonable estimate of the current base hourly/salary range is $18/hr to $19/hr. ATTENTION: After submitting your application, please check your spam folder for emails on your application status. Emails are sent from an ADP email address.

TempToFT Are you detail-driven with a passion for precision electronics? Come join the team of a leading electronics manufacturer, and help ensure the highest standards in quality and compliance. Responsibilites • Conduct in-process and first article inspections using customer drawings • Record inspection results and maintain accurate QC documentation • Inspect electronic assemblies and components to IPC and ANSI Class 3 standards • Monitor wave soldering processes and verify operator self-inspections • Use microscopes and precision tools to inspect PCBs and support soldering tasks Required • High school diploma with 5+ years in EMS or OEM electronics manufacturing • Skilled in blueprint reading, assembly instructions, and IPC/ANSI/NASA standards • Experienced in ISO 9001, AS9100, NADCAP environments and AS9102 documentation • Strong English communication; familiar with AOI equipment 23.00 Qualifications High School Diploma/GED 5+ years in EMS or OEM electronics manufacturing

At QIMA, we're on a mission to help our clients make products consumers can trust. Working with over 30,000 global brands, retailers, manufacturers and food growers, we are on the ground wherever products are made. We help businesses secure every step of their supply chain with quality inspections, supplier audits, certifications, and lab testing, all powered by our intelligent digital platform. Our team of 5,000 QIMers (and counting) across 40 offices and laboratories, are united in our shared passion for innovation and integrity, and guided by our QIMA values in the decisions we make every day. We believe in the work we do, and in making a positive difference in the world. Does this sound like something you'd like to be a part of? Our Consumer Goods Division is dedicated to helping brands, retailers and manufacturers worldwide deliver safe, quality and ethically made products to their consumers. Every day at work, our inspectors, auditors, and lab techs use their expertise to help safeguard the products you use every day in your home: from clothes and footwear to toys and baby products, to electronics, appliances, and furniture. Job Description As a Quality Control Inspector, you'll be reporting to an Operations Manager and working as a part of our Operations team. At QIMA, the role of Operations is to deliver our industry-leading services to our clients while ensuring that all the work is performed to the QIMA standard of quality. Your role in this will be to: Check email daily in order to receive inspection documents and guidelines; Attend inspections on time and communicate with supplier in a professional way; Perform the inspection of the merchandise according with company procedures. Supervise the stuffing of the containers according with company procedures; Fulfill inspection reports according with company procedures and time lines. Qualifications Think you have what it takes? First of all, we want someone with: Experience in quality management, especially softlines/ garments/ textiles/ footwear (2 years or more); Knowledge of AQL standards, as well as relevant safety and quality regulations; Good command of English (spoken and written); Great attention to detail and strong professional ethics. Additional Information Does this describe you? Then we want to hear from you as soon as possible! Apply now and we can write the next chapter of the QIMA story together. Note: This position is open to candidates who work as freelancers in Los Angeles.