Quality inspector jobs in Upland, CA

About Us Haskel, an Ingersoll Rand Company, is a High-Pressure Technology Solutions. We specialize in Air-Driven Liquid Pumps, Air-Driven Refrigerant Pumps, Hydraulic Drive Compressors, Gas Booster Compressor System, BuTech High-Pressure Valves and Hydrogen Valves Fitting and Tubing. Job Summary This role is responsible for ensuring the quality control cell is actively engaged to meet daily customer demand and production schedule. Performs receiving, in-process and/or final inspection of hardware. Conducts complex inspections as defined by quality/inspection plans or per directions of quality management/engineering. Uses a complete range of precision tools and instruments requiring advanced inspection skills and techniques. Ensures that all gauges/tools used are properly calibrated. Identify accurate and efficient means of inspection techniques. Works with general/minimal supervision. Train and provide directions to the Quality Control team under the supervision of the Quality Control Manager. Responsibilities The Quality Team Lead will inspect products by using a variety of inspection tools/devices, work instructions and computer to perform a series of inspections to correctly verify incoming parts, in-process and completed assemblies. Verify supplier material certifications, including special processes, and ensure compliance with quality/PO requirements. Creates supporting documentation (data books, certificates of conformance, etc…) Support disposition of discrepant materials (MRB) in accordance with appropriate quality procedures and maintain low inventory of on-hold parts. Verifies first articles from suppliers and internal departments. Prepares and processes records and reports to document supplier/operations performance. Qualify supplier components and/or systems for assuring conforming product. Adheres to calibrations system of inspection, measuring and test equipment. Applies Statistical Quality Control techniques as directed. Assist with interpretation of drawings, specifications and quality requirements. Properly process goods for outside processing, investigates and evaluates component parts returned and nonconforming product. The Quality Team Lead provides effective training to the quality control cell and ensures safety and quality standards are always maintained. Work with supervisor to manage and prioritize staffing assignments to ensure customer demand and the production schedule are met. Use basic problem-solving skills to ensure stable operation of the quality control cell. Report problems or concerns with quality, processes, equipment, materials and labor to Quality management. Work closely with support staff such as Purchasing/Planning, Manufacturing Engineering, Production Supervisor, Materials/Warehouse to resolve issues. Observe, maintain, coordinate and complete standard work. Update production metrics and facilitate regular team communication. Identify and support continuous improvement efforts with Quality management. Sustain and drive lean manufacturing and 5S activities. Follow documented policies and procedures as designated by the company's Quality System. Basic Qualifications Ability to read and interpret documents such as safety rules, engineering drawings, operating and maintenance instructions, Material Standards, Quality Plans, Control Plans and Inspection Test Plans. Experience with Microsoft Office (Word, Excel, Outlook). Ability to communicate effectively through oral and written communications. Ability to analyze and solve problems. Ability to work with others collaboratively. Strong organizational skills. Preferred Experience leading teams or projects strongly desired. Quality Control experience. Lean manufacturing and continual process improvement experience. Educational Requirements High School diploma or equivalent Five years + of related experience and a minimum of two leading teams. LIP Eligible Role This position is eligible for the LIP (Local Incentive Plan) of up to 4%. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. At Ingersoll Rand, we think and act like owners - of our business, our communities, our planet, and our health too. The Ingersoll Rand benefits program provides you with the tools and resources to take accountability for your health so that we can continue to help make life better. Benefits of employment and include; Medical and Prescription drug plans Wellness and Chronic disease management programs Dental, vision, life/AD&D insurance Short- and Long-term disability Health Savings Account Flexible Spending Account Parental Leave Employee Assistance Program Discount Program Employee Stock Grant 401k plan with a company match 3 weeks of paid vacation and 11 paid holidays throughout the calendar year Voluntary benefits include legal, accident, and critical illness protection

Stock Room Clerk - Santa Ana, CA 5:00 AM - 1:30 PM | Monday-Friday | Temp-to-Hire $20 per hour Seeking a reliable Stock Room Clerk to handle inventory, organize materials, and support production needs. Must be computer literate and dependable. Must be able to work overtime when needed. Desired Skills and Experience Stock Room Clerk - 1st Shift Santa Ana, CA | 5:00 AM - 1:30 PM | Monday-Friday | Temp-to-Hire $20 per hour Seeking a reliable Stock Room Clerk to handle inventory, organize materials, and support production needs. Must be computer literate and dependable. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

With a legacy spanning over 35 years, Harris Spice has been a trusted partner and leading supplier of high-quality spices, herbs, and innovative seasoning blends. With international facilities and a global supply chain, we proudly serve multiple channels of trade-including industrial bulk, food service, and retail. Our commitment to excellence, quality and consistency has earned us the trust of some of the nation's largest and most recognized brands. As Harris Spice continues to grow, we are dedicated to cultivating a dynamic, inclusive workplace where innovation thrives. We're looking for diverse, talented individuals who are ready to grow with us and help strengthen a brand known for trust, quality, and bold flavor solutions. Position Overview/Job Summary: We are looking for a 1st shift (4:30am-1:00pm) Quality Control Technician to join our team. The Quality Control Technician is responsible to ensure food safety and quality of plant through enforcement of HACCP, and Good Manufacturing Practices (GMPs) are followed by all personnel and to confirm each product meets specifications and quality parameters. Essential Job Functions: Performing pre-operational inspections at beginning of shift or production line changeovers to achieve on-time start-up and first-time quality. Collect raw material samples upon receipt and report any discrepancies to Quality Manager. Verify correct raw materials and packaging are being picked, staged, and used in production. Determine the acceptability of products using visual inspections, sampling, and testing protocols (when necessary). Perform detail-oriented tasks to support production such as checking legible lot codes, “best by” dates, container seals, handling production line rejects, etc. Enforce good manufacturing practice Provide support to the production department to minimize downtime and run efficiently. Maintain orderly paperwork and verify accurate documentation among production, quality, sanitation, maintenance, warehouse, and R&D departments. Organize production and quality records by following established protocol. Perform, log, and verify metal detector checks and provide training to production coworkers. Escalate issues of non-conforming products in a timely manner to management and segregate or place on hold. Interact and support cross-functional department personnel and adapt to change in a fast-paced environment. Ability to work with minimum supervision. Follow and enforce personal safety procedures and escalate to management. Other duties as assigned. This position has no direct reports but may assist in training coworkers and/or covering absences. This describes just some of the main duties, activities and responsibilities for the role which may change at any time with or without prior notice. Skills/Qualifications: 1-2 years of experience in a quality or lab role, preferably within a food manufacturing environment. Knowledge of sanitary food lab techniques and equipment. Able to read Standard Operating Procedures and follow instructions. Able to interpret product specifications. Good communication skills Understand and apply company and customer quality standards. Comfortable working with Microsoft Office and other production or lab information systems as needed. English fluency required, bilingual Spanish a plus. Physical Requirements: Ability to stand in a lab environment, ability to lift 55lbs, and handle food samples in a sanitary manner Sit, use hands & arms, twist, bend, push or pull Walking, standing, stooping, bending, kneeling, pulling, pushing, twisting, climb etc. The statements herein are intended to describe the general nature and levels of the work performed by employees, but are not a complete list of responsibilities, duties, and skills required of personnel so classified. Furthermore, the job description does not constitute a written or implied contract for employment. Harris Spice reserves the right to revise or change job duties and responsibilities as the need arises. Equal Employment Opportunity Statement Harris Spice is a certified Minority-owned business. Our business is an equal opportunity employer committed to a diverse and inclusive workforce. Applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), age, sexual orientation, national origin, marital status, parental status, ancestry, disability, gender identity, veteran status, genetic information, other distinguishing characteristics of diversity and inclusion, or any other protected status.

Job Posting Start Date 10-31-2025 Job Posting End Date 12-19-2025 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Quality Control Inspector in USA, Fontana CA. Reporting to the Quality Assurance Manager, the Quality Control Inspector is responsible for providing quality control and assurance throughout all phases of the production process including inspections of raw materials, in-process, and final products. Shift: Monday-Friday 6:00AM-2:45PM What a typical day looks like: Performs visual inspections and other specified tests of incoming materials, in-process production, and finished products to confirm product meets drawings and specifications Uses observation and testing to identify faults in materials and manufacturing process Documents inspection results by completing inspection reports, logs, and checklists Communicates with supervisor to determine appropriate recommendations and remedies for questions regarding products Maintain quality records as needed Keeps inspection and measurement equipment operating by following operating instructions; and notifying management when repairs are necessary. Perform other related duties as assigned The experience we're looking to add to our team: High school diploma or equivalent 1-3 years' experience of quality inspections in a fabrication/manufacturing environment. Previous experience in an ISO 9001 Certified company Thorough understanding of the product and/or process being inspected Ability to read blueprints, specifications, and technical documents Excellent written and verbal communication skills Ability to handle multiple projects while maintaining attention to detail with the task at hand Proficient in Microsoft Office Suite or related software as needed to complete reports. What the physical requirements are: Prolonged periods standing and performing repetitive tasks. Must be able to lift up to 35 pounds at times. Dexterity and accuracy as needed to operate testing equipment or gauges. Must be able to bend, stretch, kneel, and squat to perform inspections Must be able to traverse production facility to conduct inspections Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$18.33 USD - $24.75 USD HourlyJob CategoryQuality Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

Job Details 0T534 CA - El Monte, CA Full Time $29.22 - $35.20 Hourly 2nd ShiftDescription Who we are: The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products. Summary: The CMM Quality Inspector by using the Gill Process Documents (i.e.: GPS, GMS, GOS), performs essential duties to meet customer and AS9100 requirements and supports engineers with complex tasks. This position also works on quality-related projects with direction from the Quality Control Manager. Essential Duties and Responsibilities include the following. Other duties may be assigned. Follow company policies and procedures Comprehend and ensure compliance with internal quality documents, and customer specifications Read and understand customer specifications, process standards, drawings (blue prints), ANSI procedures, and industry standards. Coordinate with CNC production to inspect and rework parts in a timely matter. Must be able to setup, program, and operate Coordinate Measuring Machines, both traditional in-place and articulated-arm (Romer) devices. Proficient in reading blueprints, understanding GD&T, and working with associated technical documents. Proficient in the selection of appropriate hand-held and/or surface plate measuring equipment appropriate to the task. Comfortable providing instruction for the development of Inspection employees within the organization. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications and Education (Required) Functionally capable in the use of Microsoft Office and other basic computer software. Ability to comfortably multitask with minimal supervision. Ability to effectively communicate verbally and in writing Acceptable Vision Test results Hexagon Metrology coordinate measuring machine level 1 Working knowledge of PC-DMIS software ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee. The Gill Corporation is an Equal Opportunity Employer . Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances. The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department

Who we are: C.R. Laurence Co., Inc. (CRL) is the leading full-service provider of architectural metals, glass fittings and professional-grade glazing supplies. Offering more than 60,000 products, we serve the industry from locations throughout North America, Europe, and Australia. We operate our business to the highest standards of design, quality and customer service. The companies and institutions that depend on us impact the growing fields of glass fabrication, construction, architecture, interior design, and automotive. Their positions as leaders in their own industries mean they demand the highest standards from their suppliers. About the Position: We are currently searching for an experienced and analytical Quality Inspector to join our production department. As the Quality Inspector, you will uphold the safety regulations of our company and oversee the production process to guarantee that all our products meet quality expectations. The chosen candidate will perform regular product evaluations, record inspection results, and recommend improvements to the production process. To excel in this role, applicants should demonstrate great attention to detail with technical and math abilities. Responsibilities include, but are not limited to: Perform quality assessments on all incoming material from vendors, outgoing products for shipping and customer complaints. Reject all products and material that fail to meet quality expectations. Read drawings, plans and specifications to understand the requirements of the products and services. Perform Inspection and testing acceptance criteria Measure product dimensions examine functionality and compare the final product to the specifications. Recommend improvements to the production process to ensure quality control. Document inspection outcomes by completing detailed reports and performance records. Teach the production team about quality control concerns to improve product excellence Oversee the production process Resolve quality related issues in a timely manner. Control and maintenance of all quality documentation, such as: creation, review, approval, modification, elimination and distribution. Review, disposition and oversee rework of nonconforming product. Recommend Corrective/ Preventive actions to eliminate the causes of actual or potential non Qualification Requirements: A minimum of 1-year experience in a similar role High School diploma or equivalent qualification Certification in quality control is preferred Good math and technical skills Understanding of quality control standards and testing techniques. Basic computer skills (excel & word) Dependable, organized with ability to prioritize effectively Good communication skills Ability to problem solve, multi-task, attention to detail and work independently What CRL Offers You Highly competitive base pay Paid time off 10 Holidays (inclusive of 2 floating holidays) Market competitive 401(k) match Industry-leading medical, dental, and vision benefits Short-term and long-term disability coverage Life Insurance Employee discounts Health and wellness programs A culture that values opportunity for growth, development, and internal promotion Hourly: $21.15 - 26.44 We are excited to be an Equal Opportunity Employer at C.R. Laurence. We are actively seeking job applicants who reflect a broad representation of differences, including race, ethnicity, religion, sex, sexual orientation, gender identity/expression, physical ability, neurodiversity, age, veteran, family and economic status and background, geographical background and status, and perspective. We believe that the best companies reflect the incredible diversity in viewpoints, backgrounds, and identities of the world in their staffs, and are committed to inclusive hiring across departments and levels. C.R. Laurence Co., Inc. (CRL) is an E-Verify Employer.

Job Description Astrophysics Inc. is a leading global designer and manufacturer of X-Ray security inspection systems. Since 2002, we have dedicated ourselves to ensuring a safer world through advanced X-Ray screening and imaging technology. Our systems are deployed in critical infrastructure, aviation, and ports and borders sites in more than 140 countries. Hotels, prisons, courthouses, embassies, airports, military bases, and government buildings around the world depend on us for their safety and security. Astrophysics is an expanding, dynamic and fast-paced company looking for individuals who want to grow with us and be a part of a meaningful security mission. We currently have an immediate full-time position opening for a Quality Control Inspector located in City of Ontario, California. Job Summary: The Quality Control Inspector I is responsible for the inspection of x-ray imagining systems and components based on established inspection criteria. Inspections consist of verifying software and hardware functionality. Inspections also include verifying and approving the visual aspects of each unit, paperwork, electrical and imaging inspections. All inspection activities will be recorded on appropriate forms. Essential Duties: • Perform in-line quality inspections to insure product is produced in accordance to documented procedures, work/assembly instructions, and/or drawings. • Perform Final QC inspections as per documented procedures. Properly fill out form F-82-03-06 Final Quality Control Report • Review final QC inspection paperwork and imaging with Quality Control Supervisor or Quality Control Inspector III before release to shipping. • Verify that all paperwork from previous operations are properly filled out before release of product. • Prepares reports of findings and report inspection and test data to the Quality Control Supervisor • Follow daily work assignments as delegated by the Quality Control Supervisor. • Upon successful completion of final inspections, release product to the shipping department. • Perform QC paperwork maintenance assignments such as sorting, filing and copying as determined by the Quality Supervisor. • Assists with QC line inspections, i.e.: Label Placement, QC report, Packaging • Identify the procedure required to conduct quality test and inspections. • Follow inspection procedures as outlined in SOP-82-03 Quality Control Inspections. Line Inspection • Perform line inspection by performing audits of paperwork, labels, and visual inspection of frame & panels. • Perform line inspections as per documented procedures • Operates independently from the production function, to assess and determine quality status of goods at each stage. • Follow up and maintain all documentation regarding incoming inspection Education and Experience: • Strong attention to details, highly organized • Computer literate to include experience in navigating and manipulating file systems • Ability to multi-task and work in a fast paced environment • Effectively deal with personnel from other departments • Ability to read and write in English • High school diploma or equivalent • 0-2 years similar work experience required • Very good understanding of measuring techniques and tolerance call-outs • Proficient in the use of measuring equipment such as rulers and micrometers. • Experienced in visual inspections to determine material defects and paint imperfections Excellent benefit package including 401K plan with Employer Match 11 Paid Holidays, 10 PTO Days, Free Donuts on Fridays, Company Luncheons and year end Party! PLEASE APPLY AT: ************************************************** Equal Opportunity Employer Astrophysics Inc. provides equal employment and advancement opportunities to all individuals. Employment decisions at Astrophysics Inc. are based on merit, qualifications and abilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity national origin or protected veteran status and will not be discriminated against on the basis of disability. If you need assistance or an accommodation while seeking employment, please call *************** and ask for Human Resources. Determinations on requests for reasonable accommodation will be made on a case-by-case basis. Powered by ExactHire:185618

Job DescriptionFrom Engine Bay to Payload, we protect vital structures and systems. Hera Technologies is a premier contract manufacturer specializing in high-precision metallic and non-metallic solutions for the Aerospace, Defense, Space, and Commercial Airline sectors. Our commitment to quality, innovation, and customer satisfaction has positioned us as an industry leader in the design, manufacturing and maintenance of thermal support systems. Our team is driven by excellence, integrity, and a passion for advancing aerospace technology. Take the next step in your career with a company committed to excellence, where your contributions are recognized, and your potential is realized. Take the next step in your career with a company committed to excellence, where your contributions are recognized, and your potential is realized. Role OverviewThis is a full-time, on-site role for a Quality Control Inspector located in Ontario, CA. The Quality Control Inspector will be responsible for conducting inspections, ensuring quality control and quality assurance, and managing quality-related processes. The inspector will perform regular quality checks, document findings, analyze quality data, and maintain records. The role also involves collaborating with other team members to identify and address any quality issues and implementing corrective actions to ensure products meet the company's standards.Key Responsibilities Conduct in-process and final inspections of products to ensure conformance to standards. Perform regular quality checks, document findings, and analyze quality data. Maintain accurate and detailed records of inspections and test results. Collaborate with production teams to identify and address quality issues. Assist in implementing corrective actions to ensure products meet company standards. Ensure all processes and products adhere to industry standards and regulations. Required Qualifications Proven experience in Quality Control, Quality Assurance, and Inspection. Experience with Quality Management systems and processes. Strong communication skills. Excellent attention to detail and problem-solving abilities. Ability to work independently and as part of a team. Knowledge of industry standards and regulations. Associate degree or equivalent relevant experience. Preferred Qualifications Bachelor's Degree is preferred. Additional certifications in quality control or related fields are a plus. Previous experience in a manufacturing or fabrication environment is beneficial. Additional Requirements: Willingness to work long hours and weekends when needed to meet critical deadlines Willingness to travel to customers' locations or other Hera sites as needed Ability to use a computer and most common software programs to complete assignments Ability to communicate with individuals and groups in person, by phone and online Job DetailsType: Full TimeBusiness Hours: 7:00 AM - 3:30 PM or 2:00 PM - 12:30 AMHourly Range: $25 to $33Base Location: Ontario, CATravel: Up to 10% Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. The base salary is just one part of your total compensation package at Hera. You will also have access to a comprehensive set of benefits like: Company paid employee medical, dental and vision insurance Retirement plan participation (eligibility required) Paid Sick LeavePaid VacationPaid holidays Discretionary bonuses Physical Requirements / Work Environments· Ability to work in office, lab, and manufacturing environments with occasional exposure to noise, dust, and temperature variations· Must be able to lift and carry up to 35 lbs and perform tasks involving standing, walking, bending, and manual assembly· Visual acuity required for reading technical drawings and digital media· Valid US driver's license and ability to operate motor vehicles The above statements are intended to describe the general nature and level of work performed. They are not intended to be an exhaustive list of all responsibilities, duties, or skills required. Management may modify or assign additional duties as needed. EXPORT CONTROL REQUIREMENTS:To conform to US Government export regulations, the applicant must be a (i) US Citizen, (ii) lawful permanent resident of the U.S. (aka green card holder), (iii) protected individual as defined by U.S.C. 1324b(a)(3), or (iv) eligible to obtain the required authorizations from the U.S. Department of State. Hera Technologies is an Equal Opportunity Employer, employment with Hera Technologies is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

We are seeking a Quality Control (QC) Inspector to join our team in Santa Fe Springs, CA. This is a Temp-to-Hire position, offering an excellent opportunity to grow within a fast-paced, quality-driven environment. As a QC Inspector, you will be responsible for ensuring that materials, processes, and products meet the highest standards of quality. Key Responsibilities: Perform regular inspections of materials using measurement equipment such as micrometers, calipers, and rulers. Ensure work packets are complete, accurate, and GDP compliant; make corrections as needed. Conduct mathematical calculations required to assist in completing inspections. Maintain a high standard of quality control methodologies and inspection techniques. Work closely with the QC Department and Production teams to resolve any issues and improve processes. Qualifications: Experience: Minimum of 2 years of QC experience, with at least 1 year of experience in the Medical Device, Pharmaceutical, or Aerospace industry. Skills: Proficiency with micrometers, calipers, and other measuring equipment. Certifications: HS Diploma or equivalent; knowledge of ISO 13485 and 17025 standards is a plus (but not a requirement). Independence: Ability to work independently with minimal supervision. Attention to Detail: Strong ability to catch discrepancies and ensure compliance with industry standards. What We Look for in a Candidate: Independent worker with the ability to solve problems autonomously. Strong communication skills, both written and verbal. Team-oriented with the ability to collaborate effectively with internal departments. A keen eye for detail and a passion for quality. A proactive, assertive individual who can handle high-stress situations without compromising on quality.

Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: * Perform inspection of materials, processes and final product, per business need. * Generates inspection reports according to AS9100 requirements. * Enter inspection data into systems. * Utilizes inspection tools including calipers, gauges and testing equipment (CMM). * Reads and interprets drawings, procedures and work instructions. * Identifies areas for improvement in inspection processes and coordinates implementation. * Comply with all safety requirements; participate in safety training/practices. Qualifications: * 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. * Understanding of QA requirements, processes, practices and systems. * Demonstrated ability to work in team-based environments. * Ability to read engineering drawings to determine and measure features and tolerances. * Strong written and verbal communication skills in English. * Software experience; Excel, Word, Power Point, etc. * Bilingual - English/Spanish Perks and Benefits: * Desired first shift schedule * Premium Health Insurance - $0 employee premium & $0 deductible * Company provided life insurance for all employees with $0 employee contribution * Dental * 10 paid holidays * 5 paid sick days * Accrued vacation * 401(k) * Profit Sharing * Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.

GLAUKOS - QUALITY CONTROL INSPECTOR I - 1st SHIFT (SAN CLEMENTE, CA) How will you make an impact? The Quality Control Inspector I will be responsible for all aspects of inspection (receiving, in-process and final). In addition, this position will provide QSR support for other QA activities such as calibration, environmental monitoring, product testing, label control, etc. What will you do? Receiving Inspection Receiving inspection of components following procedures, specifications and drawings. Utilize a variety of standard metrology equipment, including: Optical comparator, height gauge, master height gauge, CMM, Vision Metrology System (VMS, e.g., Smartscope), calipers, micrometers, surface table, gauge blocks, pin gauges, dial indicators, durometer, measuring microscope, hardness testers, pull force testers, surface roughness testers, etc. Read engineering drawings and interpret geometric dimensioning and tolerancing. Review associated paperwork, complete inspection records using good documentation practices, and release components. Program the Smartscope to run automatic routines for multiple part inspections. (Level 2 and higher) Write clear and concise procedures for inspection of components, machined tubing, etc. (Level 2 and higher) Carefully handle and process extremely small components without damaging them. In-Process Inspection Perform Line Clearance for Operations activities Inspect and release labeling Review device history records for lot release. Ensure all quality records meet good documentation practices in accordance with internal procedures. Perform inspections on components and assemblies in manufacturing Final Inspection Review device history records for lot release. Ensure all quality records meet good documentation practices in accordance with internal procedures. Perform final inspection on finished goods Inspect finished goods for proper labels, packaging, tamper seals and product in accordance with procedures. Coordinate final inspection activities with outside vendors, i,e, LAL, peel testing Perform in-house peel testing on sealed packages Maintain sample retain area Other Duties Work with engineering in the design of high quality inspection / metrology fixtures. Support equipment and process validation activities by inspecting process outputs Conduct periodic compliance audits of manufacturing operations and procedures for cGMP compliance. Ensures on a daily basis quality records and company practices are compliant with internal procedures and regulations. Coordinate the monthly environmental monitoring of the cleanrooms. Coordinate quarterly dose audits. How will you get here? High School Diploma required. 0-2 years industry experience. Knowledge, Skills, and Abilities Medical device experience and working knowledge of QSR a must Experience working in a clean room and/or performing in-process assembly and manufacturing verification inspections desirable Attention to detail and accuracy a must Must have excellent documentation skills Team player, good written/oral communicator Must be organized and able to coordinate activities with outside vendors #GKOSUS

Job Description ABOUT THE COMPANY Founded in 1888, Lee Kum Kee, a Hong Kong-based global food company, specializes in creating condiments and sauces that promote Chinese cuisine worldwide. With more than 200 products to choose from, Lee Kum Kee takes the mystery out of cooking authentic and delicious Asian foods in the comfort of your kitchen. Lee Kum Kee is committed to providing authentic and innovative condiments and sauces featuring the highest quality ingredients. Armed with a unique management culture, stringent quality control, superb and innovative products, coupled with the century-long brand reputation, Lee Kum Kee has achieved unanimous recognition and won numerous prestigious awards. BENEFITS Medical, dental, life insurance covered by the company 401(k) retirement plan with company match Two (2) weeks vacations Ten (10) paid holidays POSITION SUMMARY This position performs works related to online inspection, sanitation inspection, receiving inspection, and other activities related to quality assurance and quality control. ESSENTIAL FUNCTIONS Online Inspection Conduct online inspections and verify the control parameters according to procedures and instructions for production, filling and packaging process. Record result of inspection, including weigh-up, filling temperature, packaging material, product code, container closure, etc. Perform GMP/hygiene inspection based on GMP and hygiene standards. Correct GMP/hygiene violation and report to production supervisor and/or QA Manager. All jobs shall be conducted timely according to QA/QC work instruction. Sanitation Inspection Conduct daily and monthly sanitation inspections, including pre-operation inspection and post-operation inspection. Perform ATP test and environmental swabbing. Monitor environmental air quality and inspect employees' hygiene condition. Record the result of inspection and communicate with Production Supervisor and Quality Assurance Manager. Receiving Inspection procedures Inspect incoming raw materials and packaging materials according to QA/QC work instruction. Take samples when needed according to the receiving manual Organize and update Raw Material Manual. Organize and update receiving records. Organize and update COA from suppliers Other tasks Observe and record nonconforming products / production and promptly communicate with production supervisor and Quality Assurance Manager or designee for immediate action. Make routine decisions for product holding, production line holding, etc, and verify correction and corrective action and document the incident accordingly. Calibrate equipments used for inspections and report immediately if the device is malfunction. Assist Quality Assurance Manager with any tasks related to quality compliance. Perform other special assignment from the management. SUPERVISORY RESPONSIBILITIES This position has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skills, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE This position requires with minimum a high school diploma or general education (GED). Candidate must be able to work independently and in cross-functional teams to achieve established goals. Individual must be detailed-oriented, quality-oriented, with high sense of responsibility. LANGUAGE SKILLS Candidate must be able to speak, write, read and understand English to perform daily functions. Bilingual in English/Chinese or Spanish preferred. MATHEMATICAL SKILLS Ability to add, subtracts, multiply, and divides in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written and oral form. Ideal candidate must be able to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. CERTIFICATES, LICENSE, REGISTRATIONS Not required. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands and fingers to perform daily job functions. The employee is required to stand, sit, kneel, and walk when performing essential job functions. Occasional lifting and/or move up 50 pounds. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment may be high and individual who works in certain areas needs to wear proper PPE (Personal Protective Equipment). Lee Kum Kee (USA) Inc., a division of Lee Kum Kee International Holdings Ltd., has its headquarters and manufacturing facilities in Southern California with more than 300 employees. We are looking for the best and brightest talents to join our company and work together to bring the next level of success! It is Lee Kum Kee's policy to seek and employ the most qualified persons in all jobs in a manner which will ensure equal employment opportunity as well as administer personnel actions in a manner as to not discriminate against any person on the basis of race, color, religion, national origin, age, sex, sexual orientation, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionBenefits: Dental insurance Health insurance Paid time off Profit sharing Vision insurance D.W. Mack Co., Inc is seeking a full time Junior Quality Inspector to join our team. You will conduct tests to determine the quality of finished materials and finished products. Alternative Workweek Schedule -Hours are Monday - Thursday 7:00am - 5:30pm Benefits include: Health, dental, vision, life insurance, profit sharing, vacation, sick pay Responsibilities: Inspect in-process production by confirming specifications, conducting visual measurement tests, and communicating required adjustments to the production supervisor or machine operator. Approves finished products by confirming the specifications, conducting visual and measurement tests, and communicating required adjustments to the production supervisor. Documents inspection results by completeing reports and logs. Keeps measurement equipment operating by following operating instructions and calibration requirements and calling for repairs. Maintains a safe and healthy work environment by following standards and procedures, and complying with legal regulations. Be a team member of the Quality department and support production and other internal departments to further th interest of the company. Qulaifications: Previous work experience in quality control or other related fields Strong attention to detail Strong analytical and critical thinking skills Excellent written and verbal communication Basic computer and math skills to calibrate and measure specifications Blueprint reading Ability to use measuring devices such as gauges, meters and calipers Experience in the Aerospace industry a Plus Conversational Spanish a Plus About D.W. Mack Co., Inc : D.W. Mack Co., Inc. is a family owned business that has been in operation since 1969. We are a Tool & Die stamping house with in house Die making, EDM, CNC mill & CNC lathe capabilities. Most of our business is working with the aerospace industry. We are AS9100D certified.

Job Posting Start Date 10-15-2025 Job Posting End Date Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Quality Control Inspector in USA, Fontana Ca. Reporting to the Quality Assurance Manager the Quality Control Inspector is responsible for providing quality control and assurance throughout all phases of the production process including inspections of raw materials, in-process, and final products. What a typical day looks like: Performs visual inspections and other specified tests of incoming materials, in-process production, and finished products to confirm product meets drawings and specifications Uses observation and testing to identify faults in materials and manufacturing process Documents inspection results by completing inspection reports, logs, and checklists Communicates with supervisor to determine appropriate recommendations and remedies for questions regarding products Maintain quality records as needed Keeps inspection and measurement equipment operating by following operating instructions; and notifying management when repairs are necessary. Perform other related duties as assigned The experience we're looking to add to our team: High school diploma or equivalent 1-3 years' experience of quality inspections in a fabrication/manufacturing environment. Previous experience in an ISO 9001 Certified company Thorough understanding of the product and/or process being inspected Ability to read blueprints, specifications, and technical documents Excellent written and verbal communication skills Ability to handle multiple projects while maintaining attention to detail with the task at hand Proficient in Microsoft Office Suite or related software as needed to complete reports. What the physical requirements are: Prolonged periods standing and performing repetitive tasks. Must be able to lift up to 35 pounds at times. Dexterity and accuracy as needed to operate testing equipment or gauges. Must be able to bend, stretch, kneel, and squat to perform inspections Must be able to traverse production facility to conduct inspections Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor #LI-GB1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$18.33 USD - $24.75 USD HourlyJob CategoryQuality Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

Job Description Quality Control Inspector W2 Contract to Hire Long Beach, CA $23/hr + Benefits. Weekly Pay! The Quality Control Inspector plays a key role in ensuring products meet established quality standards throughout the entire manufacturing process. This position is responsible for performing inspections and testing activities-including First Article Inspections (FAI), Incoming Quality Control (IQC), In-Process Quality Control (IPQC), and Final Quality Control (FQC)-while maintaining accurate and detailed inspection records. In this role, you will collaborate with cross-functional teams to resolve quality or safety concerns and contribute to ongoing continuous improvement initiatives. This is a full-time, on-site role based in Long Beach, CA, requiring on-site presence five days a week. Available schedules include: • Monday-Friday, 6:00 AM-2:30 PM • Monday-Friday, 7:00 AM-3:30 PM • Monday-Friday, 8:00 AM-4:30 PM Primary Responsibilities • Perform inspection and testing activities during FAI, IQC, IPQC, FQC, and throughout various manufacturing processes. • Generate accurate, detailed inspection data sheets in alignment with cGMP and Hydrafacial Quality Management System (QMS) requirements. • Properly document inspections, prepare first article documentation, and compile certification packages. • Conduct product build documentation reviews and end-item data package reviews. • Generate nonconformance reports for discrepancies identified during inspections. • Use conventional inspection tools-such as calipers, gauges, micrometers, etc.-to ensure precise measurements. • Verify inspection equipment qualification and calibration prior to use. • Read and interpret engineering drawings and specifications accurately. • Conduct visual inspections to detect defects or non-conformities in products. • Collect and analyze quality data to identify trends and improvement opportunities. • Work closely with cross-functional teams to address quality issues and support continuous improvement initiatives. • Maintain accurate documentation of inspection results and quality records. • Participate in continuous improvement projects to enhance product quality. • Report quality-related issues to leads and managers in a timely manner. • Follow all company safety procedures and perform duties in a safe, effective manner. • Perform other duties as assigned. Required • High school diploma or equivalent; technical training or quality inspection certification is a plus. • 2-3 years of experience in a quality inspection role within a manufacturing environment. • Proficiency with conventional inspection tools such as calipers, micrometers, and gauges. • Strong understanding of GDP, cGMP, and QMS requirements. • Ability to read and interpret engineering drawings and specifications. • Experience generating nonconformance reports and inspection documentation. • Strong analytical and problem-solving skills. • Excellent attention to detail and organizational skills. • Basic understanding of ERP systems and Microsoft Office. • Ability to work independently, cross train, and collaborate professionally in a team environment. • Experience handling pallet jacks and other material-moving equipment. • Comfortable working in a manufacturing environment with exposure to machinery, equipment, and varying temperatures. • Ability to perform physical tasks such as bending, twisting, lifting, pulling/pushing, standing, sitting, reaching, walking, and using inspection tools for extended periods. • Must adhere to all safety guidelines and wear required personal protective equipment (PPE). Desired • Associate degree or higher in a related field preferred. TCWGlobal is an equal opportunity employer. We do not discriminate based on age, ethnicity, gender, nationality, religious belief, or sexual orientation.

About the Role: The QC Inspector plays a critical role in ensuring that all manufactured products meet stringent quality standards and comply with industry regulations. This position involves conducting detailed inspections and tests on raw materials, in-process components, and finished goods to identify defects or deviations from specifications. The QC Inspector collaborates closely with production teams to address quality issues promptly and implements corrective actions to prevent recurrence. By maintaining accurate documentation and reporting, the inspector supports continuous improvement initiatives and helps uphold the company's reputation for excellence. Ultimately, this role ensures that only products meeting the highest quality criteria reach customers, thereby safeguarding customer satisfaction and company success. Minimum Qualifications: High school diploma or equivalent. Proven experience in quality control or inspection within a manufacturing environment. Familiarity with quality control procedures, inspection techniques, and measurement tools. Basic understanding of manufacturing processes and product specifications. Ability to read and interpret technical drawings and quality documentation. Preferred Qualifications: Certification in Quality Control or related fields (e.g., ASQ Certified Quality Inspector). Experience with statistical process control (SPC) and root cause analysis. Proficiency in using digital measurement instruments and quality management software. Knowledge of ISO 9001 or other relevant quality management systems. Strong problem-solving skills and attention to detail. Responsibilities: Perform visual and dimensional inspections of materials and products at various stages of the manufacturing process. Utilize measurement tools and testing equipment to verify product specifications and tolerances. Document inspection results accurately and report any non-conformances or quality issues to the quality control manager. Collaborate with production and engineering teams to investigate defects and implement corrective and preventive actions. Ensure compliance with company quality standards, safety regulations, and industry guidelines during all inspection activities. Maintain inspection equipment and ensure calibration is up to date to guarantee measurement accuracy. Participate in internal audits and assist in external quality audits as required. Skills: The QC Inspector applies their skills daily by meticulously examining products to ensure they meet all quality standards, using both visual assessment and precise measurement tools. Their ability to interpret technical drawings and specifications allows them to identify deviations and potential defects early in the production process. Communication skills are essential as they report findings clearly and collaborate with cross-functional teams to resolve quality issues effectively. Analytical skills support their role in conducting root cause analysis and contributing to continuous improvement efforts. Additionally, proficiency with quality management software and inspection equipment ensures accurate data recording and compliance with regulatory requirements.

Huish Outdoors products are fueling the human spirit for adventure by keeping people active, exploring, and enjoying the world's outdoor environments, both above and below the surface. We are a team who are passionate about what we do and who we are. Our team is made up of amazing people who are outdoor enthusiasts that embrace and drive change. Quality Control Inspector collaborates with the Production and Engineering teams and is responsible for all quality inspections for incoming and outgoing products. With attention to detail, ensure all Huish Outdoors products meet the quality standards and specifications set forth by the company. Our customers purchase our products because they demand quality. It is the Quality Control Inspector's responsibility to ensure that products and services meet the required standards and specifications. Key Responsibilities Responsible for delivering KPI's for the quality team, including but not limited to inspection turnaround times, inspection accuracy and quality assurance. Responsible for the inspections and approvals of incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting unacceptable materials. Responsible for monitoring and inspecting in-process production parts by confirming specifications, conducting visual and measurement tests, communicating required adjustments to production. Responsible for documenting incoming, in-process, and outgoing quality inspections following the company's quality management system guidelines. Accountable for maintaining measurement equipment operating by following operating instructions and calibration requirements and calling for repairs. Accountable for maintaining a safe and healthy work environment by following standards and procedures and complying with regulations. Accountable for approving finished goods by confirming product specifications, conducting both visual and measurement tests. Accountable for ensuring returned products pass through re-work, inspection, and documentation and confirm re-work. Accountable for documenting inspection results in the Quality Management System. Create reporting and sharing results with the Quality Manager Accountable for inspecting all recalled/re-worked items to confirm specifications and approve eligibility for resale. Maintain educational opportunities and update job knowledge Other duties as assigned. Job Qualifications, Skills, and Abilities High School Diploma or GED Associate's degree in science and engineering preferred. 3-5 years related work experience in quality control. Experience working with diving gear preferred. Proficient in Microsoft Office Suite (Word, Excel, etc.). Experience using NetSuite or other ERP software preferred. Ability to read and understand engineering drawings and documents. Ability to understand standard measurements and tolerances. Ability to use measuring tools such as calipers, micrometers, pin gauges, thread gauges, etc. Proficient ability in communications with others using written and spoken English, including the ability to provide clear, constructive feedback to production staff. Knowledge and understanding of QT9 Quality Management System software preferred Expected Travel is 0% Physical Activities include periods of standing for extended periods of time and for probably long durations. May work on a computer that emulates blue light. Walking through production areas. Able to walk around in tight areas. Lifting up to 50 lbs. Use of hands for dexterity. Eye, hand coordination.

At QIMA, we're on a mission to help our clients make products consumers can trust. Working with over 30,000 global brands, retailers, manufacturers and food growers, we are on the ground wherever products are made. We help businesses secure every step of their supply chain with quality inspections, supplier audits, certifications, and lab testing, all powered by our intelligent digital platform. Our team of 5,000 QIMers (and counting) across 40 offices and laboratories, are united in our shared passion for innovation and integrity, and guided by our QIMA values in the decisions we make every day. We believe in the work we do, and in making a positive difference in the world. Does this sound like something you'd like to be a part of? Our Consumer Goods Division is dedicated to helping brands, retailers and manufacturers worldwide deliver safe, quality and ethically made products to their consumers. Every day at work, our inspectors, auditors, and lab techs use their expertise to help safeguard the products you use every day in your home: from clothes and footwear to toys and baby products, to electronics, appliances, and furniture. Job Description As a Quality Control Inspector, you'll be reporting to an Operations Manager and working as a part of our Operations team. At QIMA, the role of Operations is to deliver our industry-leading services to our clients while ensuring that all the work is performed to the QIMA standard of quality. Your role in this will be to: Check email daily in order to receive inspection documents and guidelines; Attend inspections on time and communicate with supplier in a professional way; Perform the inspection of the merchandise according with company procedures. Supervise the stuffing of the containers according with company procedures; Fulfill inspection reports according with company procedures and time lines. Qualifications Think you have what it takes? First of all, we want someone with: Experience in quality management, especially softlines/ garments/ textiles/ footwear (2 years or more); Knowledge of AQL standards , as well as relevant safety and quality regulations; Good command of English (spoken and written); Great attention to detail and strong professional ethics . Additional Information Does this describe you? Then we want to hear from you as soon as possible! Apply now and we can write the next chapter of the QIMA story together. Note: This position is open to candidates who work as freelancers in Los Angeles.

GLAUKOS - QUALITY CONTROL INSPECTOR I - 1st SHIFT (SAN CLEMENTE, CA) How will you make an impact? The Quality Control Inspector I will be responsible for all aspects of inspection (receiving, in-process and final). In addition, this position will provide QSR support for other QA activities such as calibration, environmental monitoring, product testing, label control, etc. What will you do? Receiving Inspection Receiving inspection of components following procedures, specifications and drawings. Utilize a variety of standard metrology equipment, including: Optical comparator, height gauge, master height gauge, CMM, Vision Metrology System (VMS, e.g., Smartscope), calipers, micrometers, surface table, gauge blocks, pin gauges, dial indicators, durometer, measuring microscope, hardness testers, pull force testers, surface roughness testers, etc. Read engineering drawings and interpret geometric dimensioning and tolerancing. Review associated paperwork, complete inspection records using good documentation practices, and release components. Program the Smartscope to run automatic routines for multiple part inspections. (Level 2 and higher) Write clear and concise procedures for inspection of components, machined tubing, etc. (Level 2 and higher) Carefully handle and process extremely small components without damaging them. In-Process Inspection Perform Line Clearance for Operations activities Inspect and release labeling Review device history records for lot release. Ensure all quality records meet good documentation practices in accordance with internal procedures. Perform inspections on components and assemblies in manufacturing Final Inspection Review device history records for lot release. Ensure all quality records meet good documentation practices in accordance with internal procedures. Perform final inspection on finished goods Inspect finished goods for proper labels, packaging, tamper seals and product in accordance with procedures. Coordinate final inspection activities with outside vendors, i,e, LAL, peel testing Perform in-house peel testing on sealed packages Maintain sample retain area Other Duties Work with engineering in the design of high quality inspection / metrology fixtures. Support equipment and process validation activities by inspecting process outputs Conduct periodic compliance audits of manufacturing operations and procedures for cGMP compliance. Ensures on a daily basis quality records and company practices are compliant with internal procedures and regulations. Coordinate the monthly environmental monitoring of the cleanrooms. Coordinate quarterly dose audits. How will you get here? High School Diploma required. 0-2 years industry experience. Knowledge, Skills, and Abilities Medical device experience and working knowledge of QSR a must Experience working in a clean room and/or performing in-process assembly and manufacturing verification inspections desirable Attention to detail and accuracy a must Must have excellent documentation skills Team player, good written/oral communicator Must be organized and able to coordinate activities with outside vendors #GKOSUS