Quality inspector jobs in Virginia - 404 jobs

Electrical QA Inspector - Semiconductor Manufacturing (Manassas, VA) The Electrical QA Inspector will support quality assurance and field inspection activities for a large-scale semiconductor manufacturing project in Manassas, Virginia. This role is responsible for verifying that all electrical installations meet project specifications, applicable codes, and semiconductor industry standards in a mission-critical manufacturing environment. The ideal candidate brings hands-on electrical construction experience, strong quality and inspection expertise, and prior exposure to high-volume semiconductor fabs. A licensed Electrical Journeyman is strongly preferred. Key Responsibilities Perform field inspections of electrical installations including medium- and low-voltage power distribution systems, switchgear, substations, MCCs, panels, UPS systems, grounding, and bonding. Verify electrical installations comply with approved drawings, specifications, NEC, NFPA, and client quality standards. Inspect conduit, cable tray, feeder and branch circuit installations, terminations, labeling, and equipment setting. Review electrical work for workmanship, material compliance, and adherence to semiconductor cleanroom and safety requirements. Participate in system walkdowns, pre-energization inspections, and turnover readiness reviews. Document inspection results, deficiencies, and corrective actions through QA reports and punch lists. Coordinate closely with construction teams, superintendents, commissioning agents, and client representatives to resolve quality issues. Support testing and commissioning activities including megger testing, grounding continuity, and functional verification as required. Maintain accurate QA/QC documentation, inspection checklists, and turnover records. Enforce site safety standards and stop-work authority when unsafe or non-compliant conditions are identified. Qualifications 5-10 years of experience in electrical construction, inspection, or QA/QC roles within semiconductor or mission-critical facilities. Active Electrical Journeyman license strongly preferred. Prior experience on large semiconductor projects or at major fabs such as Micron, Intel, Samsung, and/or TSMC highly desired. Strong working knowledge of NEC, NFPA-70E, and semiconductor facility electrical standards. Experience inspecting medium-voltage systems, cleanroom power infrastructure, and critical electrical systems. Ability to read and interpret electrical drawings, one-lines, specifications, and installation standards. Strong attention to detail and ability to clearly document findings and corrective actions. Excellent communication skills and ability to work collaboratively in a fast-paced construction environment. OSHA 30 preferred.

Location: Greensboro, NC | Full-Time Who We Are We are a trusted leader in the electrical construction industry, known for nearly a century of craftsmanship, safety, and integrity. Headquartered in Roanoke, VA. we've built a reputation for delivering complex, high-quality electrical projects across the Southeast with precision, innovation, and teamwork. Our culture emphasizes collaboration, mentorship, and continuous learning, creating an environment where talented professionals grow their careers while taking pride in the work they do every day. Position Summary We're seeking a QA/QC Technician to support project quality and performance through on-site inspections, documentation, and team coordination. This position plays a critical role in maintaining the company's high standards of consistency, accuracy, and safety. The ideal candidate has hands-on experience in electrical construction, a keen eye for detail, and the ability to communicate effectively across teams and job sites. What You'll Do Conduct field inspections of underground systems, temporary power, switchgear, and equipment installations Review project scopes and QA/QC expectations during kickoff meetings Collaborate with field teams, general contractors, and project managers to ensure compliance with company and client standards Use the QuickBase QA/QC App to record inspections, document issues, and manage nonconformance reports Verify torque and megger testing results and closeout documentation accuracy Promote best practices and consistency across projects Support administrative and documentation tasks as needed Travel to job sites, including occasional out-of-town projects What We're Looking For 5+ years of experience in electrical construction (Foreman or Superintendent experience preferred) Strong knowledge of electrical systems, QA/QC standards, and installation practices Proficient in Microsoft Office Suite and the QuickBase QA/QC App Excellent communication, organization, and reporting skills Comfortable performing physical inspections in active construction environments Dedicated to safety, quality, and teamwork Why You'll Love Working Here A company built on integrity, safety, and technical excellence Collaborative, mentorship-driven culture with advancement opportunities Work on diverse, high-profile projects across multiple industries Competitive pay, benefits, and ongoing professional training If you're ready to join a respected team that values craftsmanship, accountability, and innovation - apply today and help us build what lasts.

Job Posting Start Date 01-21-2026 Job Posting End Date 03-31-2026 Anord Mardix, a Flex company, is a global leader in critical power solutions. With facilities around the globe, Anord Mardix leads in critical power infrastructure, supporting a myriad of industries, from financial institutions to data centers. We develop skill sets, encourage curiosity, and enable empowerment - we turn jobs into careers. If this sounds interesting, we'd like to meet you. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a Quality Inspector, located in Henrico. Reporting to the Quality Manager, the Quality Inspector role involves inspecting electronic systems, assemblies, subassemblies, components and parts for conformance to specifications. What a typical day looks like: Performs visual inspection of electronic card and sub-assemblies, and systems or units to ensure that all product meets the established specifications for reliability and workmanship. Utilizes gages, templates, microscopes and other manufacturing aids to ensure that all product meets the established specifications for reliability and workmanship. Ensures that all required process operations have been performed on the product that is being inspected. Enters all quality data into the appropriate electronic or manual systems. Notifies the appropriate personnel if unusual product defects are identified or if process falls below acceptable levels. Provides timely feedback to manufacturing if non-conforming product is identified. Accurately completes all administrative activities associated with quality inspection. Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards. Assists with the disposition of all non-conforming materials/product The experience we're looking to add to our team: 6-12+ months of Quality related experience required Completion of a high school degree or equivalent Previous experience in Quality roles, reading schematics, and drawings preferred Successful completion of company provided training may be required Able to read and comprehend moderately complex instructions. What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryQuality Anord Mardix is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Anord Mardix, you must complete the application process first).

JobID: 8801 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

Do you want to build an impactful career to change the world for the better? Geosyntec has an exciting opportunity for a CQA Technician - Landfill Lead Inspector in our Richmond, VA office. The position is ideal for individuals interested in building a career in the environmental construction and consulting fields. The role will compile construction quality assurance (CQA) monitoring data; perform a variety of multi-media sampling efforts; oversee environmental and remediation construction projects; and provide additional field and office support to geologists and engineers for a diverse private and public-sector client base. You will work on your own or as a part of a larger field support team on site-specific project tasks. The ability and willingness to work outdoors, perform extensive fieldwork, and travel for extensive periods of time, including overnights, weekends, and holidays is required. An interest in building a career in the environmental consulting field is essential. Geosyntec is an innovative, international engineering and consulting firm serving private and public-sector clients to address new ventures and complex problems involving our environment, natural resources, and civil infrastructure. Our engineers, scientists, technical and project employees serve our clients from offices across the world. Ranked by ENR as one of the top environmental engineering design firms, Geosyntec is internationally known for its technical leadership, broad experience, and exceptional client service. We invest in our people. Each employee is unique, and your career at Geosyntec will be too. We offer competitive pay and benefits, and well-being programs to support you and your family. To Learn More Visit: ********************************** Essential Duties and Responsibilities Perform field and on-site laboratory tests on soil, geosynthetics, aggregates, and other materials primarily associated with landfill and/or waste containment system construction; Monitor contractor activities on job sites to ensure compliance with relevant contract documents (e.g., technical specifications, construction drawings, sampling plans, CQA plans etc.); Provide CQA observation and monitoring on several types of construction and/or environmental activities on enviro-civil construction sites; Perform multi-media sampling in support of investigations, monitoring programs, and other data collection centric projects. Prepare daily and weekly field reports, construction schedules & progress reports; Ensure project documentation is correct and consistent with company policy & procedures; Interact with project personnel (contractors, project managers, engineers & clients) and assist in cultivating an integrated team approach through open lines of communications and participation; Assist in the preparation of the final data packages, health and safety documents, and the assembly of report appendices; Observe and abide by the policies and procedures outlined in the site-specific project health and safety plans and the company's Environmental Health and Safety Management policies and procedures; and Perform tasks in other company practice areas including general construction services, environmental sampling, contractor oversight, or construction quality assurance activities, as needed. Drive personal, company, and rental vehicles to client or company project or office sites, and other business locations, as needed. Skills, Experience and Qualifications High school diploma or general education degree (GED). (required) Up to two (2) years applicable experience. (preferred) Experience ensuring field activities comply with construction plans and specifications and the ability to monitor several different types of activities simultaneously. (preferred) Experience reading and interpreting construction drawings, including survey and topographical drawings. (preferred) Experience with the operation of industry typical monitoring and data collection equipment, including but not limited laptop and handheld computers, Troxler moisture /density gauges, scales, Elkins or GEM, and other equipment. (preferred) Experience with multi-media sampling including soil, water, and air. (preferred) Working knowledge of Microsoft Outlook, Excel, and Word software programs. (required) Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals, compute rate, ratio, percent, and draw and interpret bar graphs. (required) Ability to work both independently and as part of a team, self-motivation, and strong work ethic. (required) Ability to regularly lift and/or move up to 49 pounds unaided and 50-100 pounds with assistance and/or proper engineering controls. (required) Ability to speak and hear, stand, walk, reach with hands and arms, climb or balance, stoop, kneel, crouch, or crawl. (required) Regular field work and overnight travel. (required) Health & Safety training, medical monitoring, and client-driven drug and background testing. (required) Valid U.S. driver's license, satisfactory driving record, and reliable transportation, for business travel. (required) #LI-MM1 #LI-Onsite

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices all over the country. We partner with businesses as well as jobseekers to place individuals into positions efficiently. We are currently in need of QA/QC Inspectors to join our team in Pascagoula, MS, Bremerton, WA and Chesapeake, VA. Pay Range: $24-36/hour Summary Knowledge of QA/QC functions Familiarity with inspection and test procedures Perform QA/QC functions to ensure compliance with industry standards and company requirements Conduct inspections and tests according to established procedures Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Requirements Minimum of 7 years of experience in manufacturing, shipyard, or quality (testing/inspecting) roles Proficiency in MS Office applications Ability to read and interpret codes, specifications, and advanced blueprints 3 years minimum NAVSEA support experience with submarine preservation NACE Inspector and/or SSPC NBPI required. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

QC Weld InspectorLocation: Richmond, VAPay rate: $28-30/hr | Contract-to-HireSchedule: Monday-Friday, 6:00 AM - 4:30 PM Job SummaryWe are seeking a detail-oriented QC Weld Inspector to join a structural steel fabrication team. In this role, you will ensure all welds and fabricated components meet company and industry standards through inspections, documentation, and collaboration with production teams.Key Responsibilities: Perform visual weld inspections to verify compliance with AWS D1.1 structural welding code and project specifications. Use precision measuring instruments (calipers, micrometers, weld gauges, etc.) to confirm weld size, fit-up, alignment, and overall dimensional accuracy. Review and interpret welding symbols, fabrication drawings, and blueprints to ensure correct application in production. Monitor welding processes to verify welders are following approved Welding Procedure Specifications (WPS). Identify and document weld defects, discontinuities, or deviations from required tolerances. Collaborate with welders, fitters, and supervisors to address and correct nonconformities in a timely manner. Verify proper base materials, filler metals, and consumables are used in accordance with job specifications. Maintain accurate records of inspections, test results, and quality control documentation for compliance and traceability. Assist with welder qualification testing and requalification as required. Ensure all inspection activities meet OSHA safety standards and company quality policies. Support continuous improvement by identifying recurring issues and working with production teams on corrective and preventive measures. Qualifications: Previous experience as a QC Inspector or Weld Inspector in a structural steel fabrication environment required. Strong knowledge of AWS D1.1 Structural Steel Welding Code and related standards. CWI (Certified Welding Inspector) certification preferred but not always required. Ability to read and interpret blueprints, welding symbols, and fabrication drawings. Proficiency with weld inspection tools and measuring equipment. Strong attention to detail, accuracy, and problem-solving skills. Ability to communicate effectively with production teams and management. Familiarity with material traceability, shop documentation, and quality management systems. Basic computer skills for documentation and reporting.

Requirements Complete ride out edits Understanding of FTTH plant design Quality control Inspection and contractor compliance Reconciliation of close out packages Cost control for the client and Conexon Understanding of NESC standards Production verification and invoice reconciliation with production Assist in promotion and sales of Conexon services Participation in weekly client conference calls Evaluate and advise on FTTH construction techniques Weekly status reporting General computer skills Standard Company Benefits Include: Three (3) weeks of paid time off Comprehensive benefits package, including health, dental, and vision coverage Life insurance Short-term and long-term disability insurance Retirement benefits

Would you like to be part of a family who loves to take on exciting challenges? Metromont, LLC has been one of the leaders in the construction industry for nearly a century and is currently accepting resumes for QC Inspector to be part of our dynamic team! This position opening is to be located at our Winchester, VA location. Metromont was founded in 1925 on the principles of faith, honor, and passion, and almost 100 years later, those values are still the foundation of who we are and everything we do. A third-generation company with nearly 1,500 associates across six manufacturing facilities in South Carolina, Georgia, Florida and Virginia, Metromont is a leader and pioneer in the engineering and manufacturing of precast concrete. Most of all, we're a trusted partner working side by sine with our customers from the earliest stages of project design through turnover of the completed structure. In addition to the production of precast concrete, Metromont provides out customers with complementary design and engineering, hauling, erection and field services to support their full construction needs. Across the eastern seaboard, the southeast, and even as far west as Arizona, our customers rely on us to provide innovative precast solutions and the best quality for their parking structures, data centers, multifamily housing, office buildings, warehouses, schools and stadiums. And we do, because a trusted partner is who we are - and who we've been for nearly a century. ",":" The overall responsibilities of a QC Inspector include: * Check paperwork and shop tickets to assure they are organized properly. * Complete pre-pour and post-pour inspections in the QC APP. * Record an any product deficiencies in Concrete Vision and send out Repair Details to the job coordinator. (if applicable) * Inspect basic welds for size and quality. * Inspect rebar for grade, steel type and bend diameters. * Mark finished product with cast date, mark number and job number. * Check for complete accuracy of finished product in accordance with job plans. * Assign and place appropriate PCI dot code on product as needed. * Test aggregates. * Test concrete (Conventional and SCC). * Conduct concrete strength tests. * Conduct pre-pour and post pour inspections. * Run or use all quality control equipment. * Perform simple low voltage electronic wiring for test equipment. * Must adhere to all Metromont and OSHA safety rules and regulations. * Housekeeping as necessary to maintain work area, tools, and equipment in a clan and orderly manner. How do we take care of you? Benefits: * Medical, Rx, Dental, Vision Insurance, Telehealth, and Health Savings Account available on your first day of employment * Wellness Program to support employee health * 401K with company match * Paid Vacation * 7 paid holidays * Safety Shoe voucher - $150 * Continuing Education Program * $1,000 New Hire Bonus ($500 after 90 days of employment and $500 after 180 days of employment) ",quirements":" Characteristics * Ability to read blueprints, plans, and pick lists * Able to read a tape measure to 1/16 * Self-motivated * Basic reading, writing, math, and computer skills * Attention to detail and accuracy * Knowledge of Microsoft Office products including Word, Excel, and Outlook * Able to adapt to changes in work schedules, tasks, or processes * Values and demonstrates safe working behaviors Education and Technology * High school diploma or GED equivalent preferred * Forklift experience preferred * Previous construction experience preferred ",:" Metromont, LLC is an equal opportunity employer. The Company is committed to the spirit and letter of all federal, state and local laws and regulations pertaining to equal opportunity. To this end, the Company does not discriminate against any individual with regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy (including medical needs due to pregnancy, child birth or other medical conditions), national origin, age, disability, genetic information, veteran status, or other protected status. This Policy extends to all terms, conditions and privileges of employment, as well as the use of all Company facilities. The Company is also committed to making reasonable accommodations based on an individual's disability, religion, pregnancy, childbirth and related medical conditions (including, but not limited to, lactation), or any other protected status where a reasonable accommodation is required under the law. No form of unlawful discrimination, unlawful harassment, unlawful refusal to reasonably accommodate or unlawful retaliation will be tolerated. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) ",

JOB TITLE: Quality Control Inspector JOB CODE: Quality Control REPORTS TO: Quality Assurance Manager. Direct on-site project direction and daily scheduling provided through continuous communication with the applicable IMIA Project Manager and/or Supervisor. Summary of position: Responsible for monitoring quality control/assurance requirements of all preservation preformed onboard commercial and US Navy vessel in accordance with established Navy regulations and industry standards or specific contractual requirements as defined in the Scope of Work. Collaborate with customer QA personnel on necessary aspects of the job. Essential Job Requirements: Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Required Education: High School diploma or equivalent Required Certification: NACE Inspector and/or SSPC NBPI required. Required Experience: Formal or informal on-the-job training in the marine industry; familiarity with Navy and Society for Protective Coatings standards. Required Skills: Must possess knowledge of Maritime paintings standards with particular emphasis in US Navy ship preservation criterion. Word processing, spreadsheet, email, and database computer skills required. Must be able to accomplish mathematical calculations associated with preservation readings and documentation; must be able to discern and carry out complex written, oral, or diagramed instructions. Must be able to take direction; interact professionally, knowledgeably and cooperatively with supervisors and co-workers and customer representatives. Physical Requirements: Must be physically capable of working an 8-10 hour day requires average use of computer, some physical dexterity, and agility within confined and restricted spaces & tanks. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Supervisory Responsibilities: None Working Conditions: Regularly stand for long periods of time; work on scaffolds and ladders; work on top of machinery; work in confined spaces. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees. Overtime or shift work involved. Travel often required. Must follow strict safety procedures.

As a Quality Control Inspector, you will play a vital role in maintaining the highest standards of quality for our products. You will be responsible for thoroughly inspecting materials, components, and finished products to ensure compliance with specifications and industry standards. Your meticulous eye for detail will help us deliver products that meet and exceed customer expectations. About Kinsley Steel, Inc. Since 1985, Kinsley Steel has been delivering unmatched quality steel on time and on budget. Our certified and highly-skilled teams specialize in structural steel design, engineering, detailing, fabrication, erection and retrofit to existing structural members. Responsibilities as a Quality Control Inspector * Perform daily inspections of fabricated steel in our AISC certified facility * Address and document non-conformances for Structural Steel (D1.1/D1.5) * Inspect fabricated material to ensure it meets the specifications outlined in the shop drawings. In addition to these responsibilities, you will play a key role in both in-process and final inspections, ensuring the dimensional layout and placement of parts meet our rigorous standards * Participate in our annual AISC QC Audits and develop goals to improve and promote quality throughout the organization * Collaborate with production to solve any issues that arise will be crucial in maintaining our high standards Requirements & Qualifications * 3-5 years of experience in laying out and fabricating steel is required for this position * Ability to accurately read and interpret fabrication and construction drawings * Welding Certification in D1.1 and/or D1.5 is preferred Equal Opportunity Employer: All qualified applicants are encouraged to apply. Kinsley Steel, Inc. is a Drug Free Workplace where post-offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Kinsley Steel, Inc. is a participant in the Federal E-Verify Program.

Overview:Sterling has helped build careers for thousands of professionals like yourself. Our expert recruiters support you at every step in the process and as a Best of Staffing company, Sterling provides exciting work with exceptional employers across the U.S. As a contract employee of Sterling, you are eligible to receive a Full Employee Benefits Package that includes paid time off, paid holidays, 3 medical plans to choose from, dental & vision plans, 401(k), and an Employee Stock Ownership (ESOP) plan. Job Summary: Inspects electronic systems, assemblies, subassemblies, components and parts for conformance to specifications. Job Duties: Performs visual inspection of electronic card and sub-assemblies, and systems or units to ensure that all product meets the established specifications for reliability and workmanship. Utilizes gages, templates, microscopes and other manufacturing aids to ensure that all product meets the established specifications for reliability and workmanship. Ensures that all required process operations have been performed on the product that is being inspected. Enters all quality data into the appropriate electronic or manual systems. Notifies the appropriate personnel if unusual product defects are identified or if process falls below acceptable levels. Provides timely feedback to manufacturing if non-conforming product is identified. Accurately completes all administrative activities associated with quality inspection. Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards. Assists with the disposition of all non-conforming materials/product Qualifications: Ability to read electrical schematics Experience with measurement tools, calipers, and good computer skills (Microsoft Office) Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identify, national origin, disability, protected veteran status, or genetic information.

Job Description ABOUT THE ROLE The quality control group monitors, supports, and influences the design, configurations, and actual construction necessary to guide our design and production teams to manufacture high quality industry leading homes and components for our customers in accordance with regulatory requirements. The quality control inspector undertakes the inspection of materials, components, and final products to confirm adherence to quality, regulatory, and engineering specifications. He/she works collaboratively with production departments to identify ways to continuously improve production quality. The quality control inspector may work independently or under direct supervision executing specific process steps under continuous quality review and coaching as needed. ESSENTIAL DUTIES & RESPONSIBILITIES Works in a safe manner following all safety policies while performing job duties. Undertakes to maintain a safe and healthy work environment for all employees by identifying any safety standards, procedures, or regulations that are not optimally addressed. Maintains open communication with supervisor regarding safety concerns. Follows work orders and instructions in order to accurately and efficiently review the preparation and assembly of building components based on production area specifications and regulatory requirements including HUD specifications. Inspects incoming materials, in-process production, and finished products to ensure materials and products meet specifications, regulatory requirements, and applicable drawings; conducts visual and measurement tests; documents and communicates rejections of unacceptable items and required corrections; ensures defective products are not delivered to the customer. Works collaboratively with production supervisors, team leads, and line assemblers to discuss inspection results and provides guidance as needed. Documents inspection results by completing inspection reports and checklists; communicates any violations of the quality process or adherence to job performance requirements to Production Supervisors and QC Manager. Maintains a good attendance record and proactively communicates and coordinates with supervisors regarding attendance. Keeps inspection and measurement equipment operating by following operating instructions and notifying management when repairs are necessary. Assists in maintaining and keeping tools, machinery, and work area clean and organized. Performs various other job duties as assigned and needed. MINIMUM QUALIFICATIONS Must be 18 years of age. This can be a physically demanding job requiring the ability to lift 40+ pounds, to grip, work over head, pull at chest height, bend, stand, walk, kneel, crawl, push, pull, reach, climb and carry various materials and equipment. High school diploma and substantial experience in and clear understanding of the requirements and expectations across multiple production areas in a fabrication / manufacturing environment expected. Must have experience reading and interpreting schematics and excellent problem-solving skills. Experience in quality control Inspection preferred including building code knowledge, ability to gain an understanding of construction manuals, standards, regulations, and specifications regarding the products. Bilingual Spanish preferred. Ability to build effective relationships with fellow employees and supervisors including when providing constructive feedback and inspection results. Excellent written and oral communication skills required. Ability to handle multiple projects while maintaining attention to detail. Ability to work in a team, to be trained, and take direction. Flexible to work in a fast paced, changing environment. Not afraid to get dirty and handle tools/equipment daily. Must be able to pass a pre-employment drug screen.

The Quality Control Inspector oversees the Quality Control Program for the HVAC Mechanics and enforces adherence to the ISO standards and procedures. Assigned to the development, administration, and daily functions of the quality control program, this position shall be fully trained in their areas of responsibility including - instruction and procedure development; product quality monitoring; inspection techniques; and inspection data management and analysis. Shift: Part-Time, flexible. 2-3 days per week (Monday - Friday between 6:00am-6:00pm). 20-24 hours per week Pay Rate: $44.57 per hour Essential Job Functions: Quality management plans and supporting documentation to ensure that HVAC projects are being built safely on budget, on schedule, within scope, and in conformance with applicable regulations and guidelines. Administering the Quality Assurance Program throughout the contract for HVAC specific work order tickets Assigned to the development, administration, and daily functions of the Quality Assurance Program, shall be fully trained in their areas of responsibility which may include: instruction and procedure development; product quality monitoring; inspection techniques; and inspection data management and analysis. Oversees and can authorize the procurement of project safety supplies and equipment and is responsible for the implementation of the site safety training of employees and subcontractor safety training. Submit daily field notes recording activities at each project site; prepare and coordinate material submittal sheets and shop drawing submittals; and prepare quality control reports. Establish and maintain quality standards for services rendered. Recommend any necessary adjustments and changes to PM processes. Make recommendations to HVAC Mechanics on how they can correctly or more efficiently complete work or tickets and PMs. Inspect and test the services and equipment maintained. Perform inspections at random to assess quality of services. Complete weekly and monthly QC checks on completed preventative and reactive maintenance work tickets related to HVAC systems. Ensure accurate completion of assigned work tickets for maintenance tasks. Manage quality management plans and supporting documentation to ensure that projects are completed on budget, on schedule, within scope, and in conformance with applicable regulations and guidelines. Assist with logistics and administrative duties as needed. Support PM in developing integrated logistics support. Ensure operations and maintenance contract scope is understood by site team. Attend required stakeholder meetings, training programs, and reinforce requirements within the team. Other duties as assigned. Qualifications Required Skills, Experience, and Education: High School Diploma or Equivalent Ability to obtain a Top Secret clearance 5 years minimum of related experience in Quality Control, Quality Assurance, ISO Standards, or related 5 years minimum experience working with commercial HVAC systems Experience using CMMS systems Experience in working in operations and maintenance in commercial buildings Ability to multi-task and lead a project to completion Excellent verbale and written communication skills Excellent time management skills with a proven ability to meet deadlines Proficiency with Microsoft Office applications Analytical and problem solving skills Strong project estimating skills with a demonstrated ability to complete projects on time within budget Ability to multi-task, problem solve, and lead project to completion Facilities management inspection and administration with similar large-scale projects Must have the ability to prioritize and multi-task in a fast-paced environment Preferred Education, Skills, Licenses, and Certifications: Bachelor's degree in occupational health and safety, business management, statistics or related OSHA 10/30 USACE QCM HVAC journeyman license in VA Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The individual must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. Walking, stepping, climbing or otherwise moving from one location on the job site to another. Visually seeing equipment operations well (either naturally or with corrective lenses). Exposure to computer screens, monitors and other screens as necessary. Sitting for periods of time. Standing, stooping kneeling, squatting, climbing or sitting for long periods of time. •Repetitive movements by feet, shoulders, arms, wrists, hands and back in performance of work. Working at elevated heights. Exposure to working outdoors in all-weather conditions. Adapting to outdoor conditions and prolonged exposure to sometimes adverse weather conditions. Remaining calm during emergencies and respond appropriately as dictated by the circumstance of the incident. Ability to lift and/or carry up to 50lbs. Able to work at heights up to 30 feet. Working Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock; and vibration. The noise level in the work environment is usually moderate to occasionally loud. ACTION FACILITIES MANAGEMENT, INC. (AFM) is a Woman-Owned Small Business (WOSB) and a Minority Business Enterprise (MBE) established in 2001 that provides services to government and commercial clients in 10 states and the District of Columbia. AFM's core competencies are in the areas of Integrated Facilities Management such as Operations and Maintenance, Janitorial Services, Security, Emergency Management, and Administrative Support.

The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. Apply technical knowledge and expertise in determining proper equipment installation and operation. Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards and technical data. Review and approve locally developed procedures and solutions to complex repair situations. Perform analysis of defects and interprets quality control rejection and failure trends. Monitor safety, training, and certification requirements. Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. Maintain Quality, Safety, Training and Certification Records. Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. Inspect forms and records related to aircraft maintenance. The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. Document maintenance as per Quality Assurance (QA) and established regulatory requirements. Comply with work order timekeeping system procedures. Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. Perform weekly Foreign Object Damage (FOD) walk-downs. Maintain situational awareness, stay cognitive-focused, and mitigate risks. Comply with processes and procedures as per DHS/DOD documents and publications. Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. Perform weekly break room and smoking area cleaning duties. Perform other duties as assigned. Minimum Requirements Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. High School Diploma or equivalent is required. Five (5) years of aircraft maintenance experience. Valid Airframe and Power Plant (A&P) License required. Valid FAA Inspection Authorization (IA) required. Possess a valid United States driver's license. Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. Ability to read and interpret data is required. Ability to read, write, speak and understand English. Physical Requirements/Working Environment: Capable of performing tasks that frequently require: lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. May be required to work night shifts. May work in Aircraft maintenance hangar or outside. Some domestic travel may be required. Compensation & Benefits Hiring Salary Rate: $126,880.00 This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: please visit our career site: *********************** Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Burlington Medical is thrilled to provide a great career opportunity for a Quality Control Inspector on Second Shift. with one of the leading manufacturers and providers of radiation protection products. The hours for this position are 2:45pm -11:15pm. Job Purpose: To ensure compliance of products and processes. Duties: Conduct in-process, receipt, and final inspections. Initiate Non-Conformance reports (Material Rejection Notices) as required. Work with other company personnel to resolve nonconformances. Skills/Qualifications: 0-2 years quality control experience Ability to understand manufacturing processes and the means by which they are controlled Experience with statistical analysis of manufacturing processes Strong problem-solving skills A good work ethic Good interpersonal and communication skills High school Diploma or equivalent Word, Excel, Outlook knowledge preferred Operation of basic measuring devices Ability to work on their own

Job Title: Quality Control Inspector (Electrical Contractor) Employment Type: Full-Time We are seeking a Quality Control Inspector to oversee electrical construction activities on project sites, ensuring all work meets applicable codes, standards, and project specifications. This role plays a key part in promoting quality, safety, and compliance through inspections, documentation, and collaboration with field teams. Key Responsibilities: Inspect electrical installations and verify compliance with NEC, NFPA, IEEE, and project requirements Review drawings, specifications, and quality plans Document inspections, test results, and non-conformance reports (NCRs) Support field teams with quality assurance processes Ensure adherence to safety protocols including LOTO and arc flash Collaborate with project managers, subcontractors, and engineers to maintain high standards Qualifications: Bachelor's degree in a related field (or equivalent experience) Minimum 3 years of construction or field-related experience Proficiency in Microsoft Office and willingness to learn platforms like Procore and Bluebeam OSHA 30 preferred (or willingness to obtain) Strong attention to detail, communication, and organizational skills Work Environment: Primarily based on active construction sites with occasional office visits. Must be available for non-standard hours during key construction phases. What We Offer: Competitive Pay Comprehensive Benefits Package with Tax-Advantaged HSA and FSA offerings Employer-Paid Short- and Long-Term Disability Programs Employer-Paid Life Insurance Generous Paid Time Off Provisions 401K Retirement Savings Plan with Company Match Tuition Reimbursement Fully Paid Parental Leave Voluntary Products Including: Critical Illness Insurance and Accident Insurance Corporate Wellness Program with Wellness Time Off and Rewards Visa sponsorship is not available for this position at this time. The Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of the Company without a prior written search agreement will be considered unsolicited and the property of the Company. Please, no phone calls or emails. The Weitz Company, LLC (and its U.S.-based subsidiaries and affiliates) recognizes the value of and is committed to hiring and retaining a diverse and inclusive workforce. We are an Equal Opportunity Employer and follow applicable affirmative action guidelines and policies. All qualified applicants will receive consideration for employment (including minorities, females, veterans, and individuals with disabilities, regardless of sexual orientation, gender identity, or other protected categories in accordance with applicable state and federal laws). The Company is a drug and alcohol-free workplace and background checks are required if applicable. Click here to review our Privacy Notice.

Responsible for final inspections in electrical and other departments as applicable, on assigned shelters prior to shipment to customers. Responsible for assuring departments complete rework and issues illustrated on write-ups from inspections. Troubleshoot for present and/or potential problems Perform all electrical inspections Perform some mechanical inspections Assist with all department inspections, as assigned Must be familiar with and have the ability to perform all aspects of VFPs electrical duties/tasks Work with Engineering and Production to resolve problems Interface with customers having issues/concerns Create and maintain precise and detailed documentation Perform other duties as assigned Qualifications Two (2) or more years experience with the NEC (National Electric Code) or equivalent Two (2) or more years experience with fire suppression systems and HVAC (heating, ventilations, and air conditioning) or equivalent Excellent verbal/written communication and interpersonal skills Demonstrated ability to coordinate a high level of activity under a variety of conditions and constraints Ability to read blueprints

JOB TITLE: Quality Control Inspector JOB CODE: Quality Control REPORTS TO: Quality Assurance Manager. Direct on-site project direction and daily scheduling provided through continuous communication with the applicable IMIA Project Manager and/or Supervisor. Summary of position: Responsible for monitoring quality control/assurance requirements of all preservation preformed onboard commercial and US Navy vessel in accordance with established Navy regulations and industry standards or specific contractual requirements as defined in the Scope of Work. Collaborate with customer QA personnel on necessary aspects of the job. Essential Job Requirements: Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Required Education: High School diploma or equivalent Required Certification: NACE Inspector and/or SSPC NBPI required. Required Experience: Formal or informal on-the-job training in the marine industry; familiarity with Navy and Society for Protective Coatings standards. Required Skills: Must possess knowledge of Maritime paintings standards with particular emphasis in US Navy ship preservation criterion. Word processing, spreadsheet, email, and database computer skills required. Must be able to accomplish mathematical calculations associated with preservation readings and documentation; must be able to discern and carry out complex written, oral, or diagramed instructions. Must be able to take direction; interact professionally, knowledgeably and cooperatively with supervisors and co-workers and customer representatives. Physical Requirements: Must be physically capable of working an 8-10 hour day requires average use of computer, some physical dexterity, and agility within confined and restricted spaces & tanks. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Supervisory Responsibilities: None Working Conditions: Regularly stand for long periods of time; work on scaffolds and ladders; work on top of machinery; work in confined spaces. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees. Overtime or shift work involved. Travel often required. Must follow strict safety procedures.