Quality inspector jobs in Waukegan, IL - 458 jobs

The Operator - Visual Inspection will work at our client's Manufacturing site in Kenosha County WI, where parenteral products for domestic and international markets are manufactured and packaged. The primary purpose of this role is to safely inspect high-quality pharmaceutical products in accordance with site standards and current Good Manufacturing Practices (cGMP) within controlled facilities. This position requires operation of various automated and semi-automated manufacturing equipment, as well as performance of manual inspections. The operator is responsible for ensuring product quality while demonstrating a strong commitment to safety, compliance, and operational excellence. Responsibilities: • Adhere to Parenteral Manufacturing safety policies and procedures and contribute to a safe work environment. • Set up and operate non-aseptic manufacturing processes, including automated and semi-automated inspection equipment in controlled facilities. • Follow standard operating procedures (SOPs), cGMP requirements, and safety policies and procedures. • Accurately document process steps using appropriate batch documentation systems (paper and electronic). • Participate in department meetings, team-building activities, and training programs. • Provide input into department SOPs and training materials as needed. • Maintain accountability for working safely and supporting all site and corporate health and safety goals. Basic Requirements: • Minimum education: High School Diploma or GED • Must pass a post-offer physical examination • Must pass an eye exam and not be color blind • Ability to wear required safety equipment (safety glasses, safety shoes, protective gloves, etc.) • Ability to work within a shift-based schedule • Willingness to work overtime, weekends, and off-shifts as required Additional Skills / Preferences: • Experience working in a GMP-regulated environment • Ability to troubleshoot basic production issues and effectively use tools • Experience with PMX, MasterControl, Flow-stream, or other electronic batch documentation systems • Previous pharmaceutical manufacturing experience • Experience with manual, automated, and semi-automated inspection processes • Strong attention to detail when performing manufacturing tasks and documenting production activities on paper and computer-based systems • Basic math skills, including evaluation and interpretation of production data • Basic computer skills, including use of HMIs and other computer terminals to monitor equipment status and document production activities • Excellent documentation skills • Proven teamwork skills and ability to work closely with operations teams during line setup, operation, and changeovers Additional Information: • Ability to work overtime as required • Ability to wear required safety equipment (glasses, shoes, gloves, etc.) • Primary work location: Kenosha County, Wisconsin • Ability to travel up to approximately 10% This is intended to provide a general overview of the job requirements at the time it was prepared. Job responsibilities may change over time and may include additional duties not specifically described. For GMP purposes, the job description should be updated for significant changes. Employees should consult their supervisor regarding actual job responsibilities and related duties.

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, well give you what you need to make it happen. It wont always be easy, growing takes grit. But Inventory Control, Intern, Spring, Inventory, Manufacturing Engineer, Control, Banking, Business Services

Pride Health is hiring a Quality Control Technician to support our client's medical facility based in Elmhurst, Illinois. This is a 13-week contract job opportunity and a great way to start working with a top-tier healthcare organization! Job Summary: The Sterile Processing Quality Control Technician ensures the highest standards of instrument cleanliness, assembly accuracy, and quality assurance in sterile processing operations. This role combines hands-on technical processing responsibilities with detailed inspection and documentation tasks critical to patient safety and process reliability. This position focuses on quality assurance beyond standard sterile processing technician duties, ensuring compliance with all regulatory and internal standards while maintaining an unwavering commitment to safety and process excellence. Job Responsibilities: -Follow all ANSI/AAMI standards, manufacturer Instructions for Use (IFUs), SOPs, and company Work Instructions. -Decontaminate used surgical instruments and equipment using proper PPE and protocols. -Disassemble, clean, and reassemble complex surgical instruments as required. -Accurately assemble and package instrument trays and sets per guidelines. -Operate washers, sterilizers, and other processing equipment safely and effectively. -Inspect instruments for cleanliness, functionality, and damage prior to packaging. -Document missing or damaged instruments per SOPs. Required Skills & Experience: -Hands-on experience in sterile processing, demonstrating proficiency in decontamination, assembly, and sterilization procedures. -Strong attention to detail. -Ability to work effectively under pressure in a fast-paced, team-oriented environment. -General knowledge of surgical instruments and processing protocols. -Knowledge of sterilization techniques, including steam sterilization and infection control practices. -Familiarity with ANSI/AAMI standards and manufacturer Instructions for Use (IFUs). Additional Information: Location: Elmhurst, Illinois Schedule: 2nd Shift- 3 pm-11:30 pm Pay Range: $24/Hr. - $28/Hr. Start: 01/26/2025 *Offered pay rate will be based on education, experience, and healthcare credentials. Interested? Apply now! About Pride Health As a certified minority-owned business, Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - are committed to creating a diverse environment and are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics. Pride Global offers eligible employee's comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance, and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors.

Altom Transport is currently seeking an HM183 Cargo Tank Inspector to fill a first-shift position at our Chicago terminal. This role also includes responsibilities as a lead trailer mechanic. Our full-service maintenance facility is designed to work on our private fleet. Take the next step in your career and join our family. Visit altomtransport.com and apply today. Feel free to reach out directly to us with any questions! This position operates out of our Chicago/Joliet terminal. Compensation: Full compensation package: $75,000 - $100,000 based on location and experience Requirements A self-starter that works as a team member under the direction of management Ability to prioritize work and follow through with repairs Must be creative, dedicated, and take responsibility for repair work Verifiable mechanical experience and own hand tools are required General maintenance and repair experience Liquid tanker experience HM183 experience Pre-Employment Drug Screen and Background Check is required Benefits Complete benefits package includes: Full Family Health Insurance - Prescription Card, Dental, Vision 401K Retirement Plan/Company Match Profit-Sharing Paid Vacation & Holidays Boot Allowance Quarterly Tool Bonus Quarterly shop and safety bonuses Glove program Company-paid Training

Quality Inspector II (2 nd shift) Reports To: Quality Assurance Manager (278) Summary: Tests and inspects products at various stages of production process and compiles and evaluates data to determine and maintain quality and reliability of products. Job Functions: Selects products for tests at specified stages in production process, and tests products for variety of qualities, such as dimensions, performance, and mechanical, electrical, or chemical characteristics. Records test data per inspection plans, applying statistical quality control procedures if appropriate. Evaluates data and writes reports to validate or indicate deviations from existing standards. Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Maintains and reviews inspection data in SPC software. Analyzes capability and determines appropriate actions for deviant conditions. Set up and perform destructive and nondestructive tests on materials, parts, or products to measure performance, life, or material characteristics per blueprint and/or customer specific requirements. Prepare graphs or charts of data or enter data into computer for SPC analysis. Performs in-process inspection and first-piece approval of parts utilizing OGP, Keyence, CMM, comparator and /or hand instruments, gages and fixtures. Set up and run CMM, Keyence and OGP programs on new launches, existing production, prototypes, tooling and other items as directed. Accurately interprets blueprints including all GD&T symbols and utilizes information when inspecting parts. Perform raw materials and outside services inspection including physical verification of dimensions and gages. Review of all specific documents, standards and clauses indicated on the purchase order. :Job Requirements Requires a High School diploma. Working knowledge of Word, Excel, email, and familiarity with manufacturing ERP systems. Be able to work overtime after the regular shift for additional inspection coverage if requested. Reading, writing and math skills at a high school level. Ability to interact with other team members to communicate product or program feedback, information and issues. Near acuity and accommodation are required for reading machine dial gauges, blueprints, and precision measuring instruments used in the inspection of parts. Understanding and applications of GD&T from drawings and/or customer specifications. Working Conditions: the employee is subject to: High noise levels from operating machines. Physical hazards from moving equipment and machine parts. Breathing fumes, dust and mist. Skin exposure to oils and cutting fluid. Required to stand, walk, push, pull, reach overhead, and bend to the floor. Required to exert up to 10 to 20 pounds of force constantly to move objects.

Job Posting Start Date 01-20-2026 Job Posting End Date 02-23-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a Quality Control Inspector located in Buffalo Grove, IL Reporting to the manager the potential candidate would inspect electronic systems, assemblies, subassemblies, components and parts for conformance to specifications. 0600am-0600pm Rotating Shift Responsibilities: Performs visual inspection of electronic card and sub-assemblies, and systems or units to ensure that all product meets the established specifications for reliability and workmanship. Utilizes gages, templates, microscopes and other manufacturing aids to ensure that all product meets the established specifications for reliability and workmanship. Ensures that all required process operations have been performed on the product that is being inspected. Enters all quality data into the appropriate electronic or manual systems. Notifies the appropriate personnel if unusual product defects are identified or if process falls below acceptable levels. Provides timely feedback to manufacturing if non-conforming product is identified. Accurately completes all administrative activities associated with quality inspection. Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards. Assists with the disposition of all non-conforming materials/product. Qualifications: Completion of a high school degree or equivalent is preferred. Successful completion of company provided training may be required. Typically requires 1year of related experience. AW20 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to Illinois)$18.33 USD - $24.75 USD HourlyJob CategoryQuality Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Temp Key Responsibilities: Inspection of incoming and outgoing products and materials to engineering and specifications using basic test and measuring equipment. Ability to work with handheld gauges, such as calipers, micrometers, height gauges, and pin gauges. Ability to work with an optical comparator. Able to read and interpret blueprints. Knowledge of GD&T is a plus. Experience with engineering drawings and tolerances, standards, and specifications. Upload your resume or send it to ***************** Benefits Offered: 401(K) 401(K) matching Dental, Vision, Life, and Health insurance (after 60 days) Paid Time Off/ IL Plawa Qualifications: 1- 2 Years of experience performing close/tight-tolerance mechanical inspections required.

Quality Inspector 2nd shift 🕒 Monday-Thursday | 3:30 PM - 2:00 AM (3-day weekends!) 💲 Pay: $18 - $25/hour (based on experience) ✨ Full Benefits Package after 60 days 🔎 Ludlow uses E-Verify to confirm work eligibility in the U.S. Do you take pride in details and have a passion for quality? Do you have experience in a manufacturing, (sheet metal, welding) environment? Join our team as a Quality Inspector and play a key role in ensuring our products meet the highest standards. This role is perfect for someone who enjoys hands-on work, problem-solving, and making a real impact in a fast-paced manufacturing environment. What You'll Do Inspect materials, in-process, and finished products Use precision tools (calipers, micrometers, gauges, etc.) Document results and maintain quality records Support continuous improvement and ISO 9000 standards Inspect parts and assemblies to ensure they meet blueprint and customer specifications What We're Looking For Required Skills & Experience 3-5 years of experience in a quality inspection role within manufacturing (sheet metal, welding, or related environment) Strong ability to read and interpret blueprints, drawings, and manufacturing prints Proficient in using measuring tools (calipers, micrometers, height gauges, etc.) Familiarity with ISO 9000 standards and Statistical Process Control (2-3 years) High school diploma or equivalent Proficiency in Microsoft Office (Outlook, Word, Excel, PowerPoint) Excellent communication, problem-solving skills, and knowledge of manufacturing processes Hands-on metal fabrication experience Preferred Skills (a big plus!) Certified AS9100 Internal Quality Auditor Six Sigma Green Belt or Black Belt CMM experience Bilingual (Spanish) Why You'll Love Working Here We believe in taking care of our team. Our comprehensive benefits package includes: Medical, dental, and vision insurance IRA with company match Life insurance, short- and long-term disability Legal, identity theft, and wellness programs Critical illness, hospital indemnity & accident insurance Paid time off, holiday pay, and floating holidays This is more than just a job-it's an opportunity to grow your skills, be part of a supportive team, and make a difference every day. 👉 Apply today and bring your expertise in quality to a company that values precision, integrity, and innovation.

Quality Control Inspector - 1st Shift, 7am-3:30pmPay: $20-$24/hour (Based on Experience) At our client, they don't just build components-they ensure quality at every step. As a Quality Control Inspector, you'll play a critical role in maintaining the excellence our customers depend on. If you're detail-driven, reliable, and ready to grow within a fast-paced manufacturing environment, this is your opportunity to make an impact. We are seeking a meticulous and motivated Quality Control Inspector for our 1st shift team. You will be responsible for performing Incoming, In-Process, and Final Inspections, using traditional metrology tools to ensure components meet required specifications and quality standards. Essential Duties and Responsibilities: Inspect alignment and dimensions of parts using ID/OD micrometers, height stands, and calipers Perform manual drafting to document dimensional requirements Verify parts against product specifications, drawings, and part lists Visually examine parts and document production results Ensure all inspections and records comply with the Quality Management System and Customer Requirements Confirm assembly completeness and identify missing or incorrect hardware Participate in ongoing training and maintain equipment certifications Required Competencies & Skills: Proficient with manual inspection tools (Micrometers, Calipers, Height Stands) Ability to read and interpret manufacturing drawings and blueprints Strong verbal and written communication skills Solid mathematical knowledge including geometry, trigonometry, fractions, decimals, and layout functions Excellent critical thinking, problem-solving, and time management abilities Adaptable and able to work both independently and as part of a team Preferred Qualifications: Valid driver's license Prior experience in a manufacturing or quality control environment Exceptional attendance record (required) Completion of Overhead Crane and Forklift Training (training provided upon hire if needed) Physical Requirements: Frequent standing, walking, climbing, stooping, kneeling, bending, and lifting (up to 50 lbs) Frequent use of hands, tools, and inspection equipment Occasional talking or hearing in a production setting

Job Title: Quality Control Inspector Department: Quality Reports to: Quality Control Manager Classification: Non-Exempt Travel: None GWS is the North American leader in the design and manufacturing of custom cutting tools. Servicing industries including Aerospace, Automotive, Medical, Energy and general Engineering. As the fastest growing company in our industry, the career opportunities are numerous and the pathways for advancement nearly limitless. Entry-level position with limited prior training or relevant work experience. Has basic skills to perform routine tasks. Works within clearly defined standard operating procedures. Works with either close supervision or under clearly defined procedures. Job Summary: The Quality Control Inspector is responsible for ensuring that all products meet customer and company standards by inspecting end mills and form tools at the end of production. Responsibilities include inspection and test of product, process audits and disposition of non conforming product. Coordinating the use, calibration, and servicing of all inspection equipment. Duties/Responsibilities: Inspect cutting tools manufactured within extremely tight tolerances. Examine tools for proper geometry within blueprint specifications. Compare quantity and part number of items received with procurement data and other specifications to ensure completeness of and accuracy of order. Approve or reject items, and record inspection and disposition data. Inspect incoming raw material, thin film coating, vendor supplied tooling, grinding wheel geometric configurations and final inspections. Prepare inspection procedures for reference use in subsequent inspections. Run inspection programs for in-process process and final inspection. Assist in etching product identifications. Other duties as assigned. Education and Experience: High school diploma or general education degree (GED) or 1-3 years industry related experience and/or training. Certification from a qualified training institution in the field of tool and cutter grinding is ideal but not required. Manufacturing experience is required. Strong geometry knowledge is required. Experience with hand gauges and non contact-contact inspection equipment is required. Required Skills/Abilities: Ability to convert metric to inch and decimal to fractions. Strong analytical troubleshooting ability. Uses standard operating procedures to guide own work and solve standard problems. Applies basic skills to perform simple activities. Understands how the assigned duties relate to others in the team and how the team integrates with others. Uses communication skills to exchange information. Use assigned methods, tools and processes. Support sharing of best practices. Familiarity with navigating Windows based computer programs. knowledge of the gauge calibration process. Ability to read and comprehend blueprints. Knowledge of calipers, hand micrometers, and metrology equipment. Ability to work in a fast paced manufacturing environment. Involvement And Knowledge of the use of quality management system procedures, forms, work instructions, and certifications. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.

Job Description Since 1968, Finzer Roller has been a leader in the rubber roller manufacturing industry, specializing in value-added solutions for our customers. Our innovative rubber compounds are designed to enhance various applications, and our skilled technical representatives provide expert guidance in rubber roller and rotary brush applications. This is a first shift position, $20 - $24 per hour, bonus potential, medical, dental, vision, life, short- and long-term disability, 401k + match, PTO, and paid uniforms. Position Summary: The Quality Control Inspector accurately receives, measures, evaluates, and documents all incoming rolls. This position requires both mechanical aptitude and precision, as all measurements directly affect order entry, job planning, and customer satisfaction. Key Responsibilities: Measure journal diameters, core diameters, face lengths, and groove details. Uses measuring tapes, micrometers, calipers, and math with fractions and decimals. Assess groove patterns and identify specific features and conditions on the roll surface. Determine condition of the roll and identify needed repairs. Assign pricing for repairs based on internal guidelines. Enter accurate data into booking documentation. Communicates with other departments when discrepancies or issues arise. Requirements: Strong measuring and math skills Experience with measuring tapes, micrometers, pi tape, and hand tools. Ability to interpret and document technical specifications with accuracy. Previous experience in shipping and receiving or a related field. Basic computer skills, including proficiency in Microsoft Office and familiarity with Epicor or similar ERP system. Demonstrate commitment to cleanliness and a safe workplace. Able to lift, move, and position heavy components using proper equipment.

Quality Inspector Onsite - Gurnee, IL/Somers, WI/Manchester, TN Who We Are: PurposeBuilt Brands, rooted in a legacy dating back to Weiman, stands as a pioneer in crafting top-tier products for specialty surfaces. Our beloved brands, including Weiman, Goo Gone, Green Gobbler, Biokleen, Gonzo, Magic, Wright's, Stone Care International, Urnex, Five Star, and Micro-Scientific, are preferred choices among consumers and seasoned professionals alike. At PBB, we seek to hire employees who bring a level of engagement, drive, and performance that pushes business forward. We work together and are motivated by positive results, while continuously thriving in a scrappy environment. We believe our greatest assets are the talented and passionate employees who are motivated by our purposeful work. Our company may be 60 years old, but the real growth is just getting started. The Role: The Quality Inspector is responsible for ensuring that finished products and raw materials meet quality control requirements. This position interacts with the production, purchasing, and shipping departments. What You Will Do: Inspect the quality of the raw materials & outsourced products that require incoming inspection Document defective raw material & outsourced product findings and communicate quality issues to Supply chain, working to resolve the quality issue Check the filling line before each production run to ensure that: All packaging materials that were used for previous production run were removed from the filling area Filling line was cleaned and validated (if required) Correct type of packaging was brought to the filling line Inspect quality of finished products for the following: fill weight heat seal verify color and odor lot number application and removal torque general appearance pallet configurations other Document quality control findings. Review daily production batch records Archiving of production records and associated quality documents Train production personnel on quality procedures Work with the production department to resolve quality issues associated with finished products Perform detailed quality control inspection of first runs of new products Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. What You Will Bring: Ability to perform all tasks while continuously standing Good math skills Good communication skills Good attention to detail Basic computer skills Benefits: PBB offers a wide range of benefits because we understand no two employees are the same. We want our employees to feel empowered to set their day up for success, whether that's in the office or remote. What We Offer: Generous paid time off Competitive salaries and bonus incentives Competitive medical, dental, & vision insurance Pet insurance Annual fitness stipend Unmatched employee discount on all products Job Title: Quality Inspector PBB Job Code: QCINSP Mercer Job Code: QLT.03.030.S20 FLSA Status: Non-Exempt Reports To: Quality Manager Job Function: Quality Work Location: Gurnee, IL/Somers, WI/ Manchester, TN Travel Required: None

Acute Care TechnologyAt ZOLL, we're passionate about improving patient outcomes and helping save lives. We provide innovative technologies that make a meaningful difference in people's lives. Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiopulmonary and respiratory conditions. The Acute Care Technology division of ZOLL Medical Corporation develops and delivers innovative lifesaving products and software solutions to EMS, hospital, public safety, and military customers globally. Products include AEDs, trauma kits, ventilators, temperature management solutions, and more. Our dedicated employees take pride in their commitment to improving patient outcomes while delivering world-class customer service. At ZOLL, you won't just have a job. You'll have a career-and a purpose. Join our team. It's a great time to be a part of ZOLL! Job Summary Verification of procured materials, sub-assemblies, finished products and processes to the companies Quality Standards. This may include visual inspection, dimensional measurement, and electrical testing to verify conformance to established standards and specifications. Essential Functions Inspect measure and/or test material to established methods and standards. Utilize various inspection tools, such as Vision System, Verniers, Micrometers, Rulers, Oscilloscopes, DVMs, Power Supplies, Defib/Pacer Analyzers, custom fixtures etc. per procedures. Document inspection and test results according to established procedures. Maintain quality documentation files such as, Device History Records (DHR) and Inspection History Records. Process returned material to established procedures. Read and interpret documentation such as Standard Operating Procedures (SOP), schematics, technical drawings, PDAs and ECOs. Interface with other functions and departments as required. Required/Preferred Education and Experience High School Diploma Or equivalent. required 1-3 years experience in a related position. required Knowledge, Skills and Abilities Good written and oral communication skills. Ability to read specifications, procedures and engineering drawings. Familiar with use of mechanical and electronic test equipment. IPC-A-61OD for Incoming Inspection, preferred. Basic computer skills: Microsoft Office, Oracle and MES. Physical Demands Ability to lift up to 50 lbs. ZOLL is a fast-growing company that operates in more than 140 countries around the world. Our employees are inspired by a commitment to make a difference in patients's lives, and our culture values innovation, self-motivation and an entrepreneurial spirit. Join us in our efforts to improve outcomes for underserved patients suffering from critical cardiopulmonary conditions and help save more lives. The hourly pay rate for this position is: $20.00 to $20.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran. ADA: The employer will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990.

Job DescriptionAbout Us: Champro is a privately-owned sporting goods and apparel manufacturer that has been in business for 30+ years. We deliver high-value, traditional & innovative athletic equipment and apparel via outstanding, integrity-driven customer service. Our business philosophy is focused on our customers and we take pride in providing them with the best overall values in team sports products. Position: As an Apparel Quality Control Inspector, you will be an essential part of the quality control and product development teams. You will become an expert in how to inspect apparel products, which includes taking precise and repeatable measurements, checking for defects in production and materials, and confirming that product meets desired specifications. In our busy environment, it is a “must” to be an organized and flexible multi-tasker as we work efficiently to meet the needs of our customers and internal team. Responsibilities: Perform quality control inspections on our apparel product line Take and record measurements Inspect garments for sewing or fabric defects Check apparel products against technical specification packets Perform color evaluations Communicate issues to supervisor so follow-up inspections can be organized Separate defective garments and classify them for rework if possible Pre-production inspections Check measurements Communicate results to product management team Address non-conforming product that can be fixed Wash dirty or stained product to get it back into stock Assign work to applicable re-work team Provide support on projects related to apparel quality control as needed Qualifications: Attention to detail Move efficiently Be organized Be precise Work well individually and as a part of a team Experience with sewing or fabrics or clothing Computer-proficient: Email and Microsoft Office (Excel) Good communicator Bilingual in Spanish is a plus Ability to stand for lengthy periods of time and lift boxes up to 30 lbs Willing to learn and take on new tasks as needed Company Culture: We are proud to offer eligible associates a full-range of benefits including medical, dental, vision and life insurance, as well as short-term and long-term disability, 401K, Profit Sharing, paid time off, holidays, and reimbursement toward gym membership fees. A collaborative atmosphere working together to exceed our customers' expectations, as well as, an Equal Opportunity Employer bringing together diverse individuals to develop new and innovative solutions

Temp To Full-Time Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping. Reject all products and materials that fail to meet quality expectations. Read blueprints, plans, and specifications to understand the requirements of products and services. Measure product dimensions, examine functionality, and compare the final product to the specifications. Recommend improvements to the production process to ensure quality control. Document inspection outcomes by completing detailed reports and performance records. Teach the production team about quality control concerns to improve product excellence. Supervise the production process. Resolve quality-related issues in a timely manner.

Job Description SMS Staffing is Hiring - Quality Control Inspectors! Job Title: Quality Control Inspector Job Type: Temp to Hire Pay: Starting at $18/Hr.+ (based on experience) Shift: 2nd Shift | 4:00 PM - 12:30 AM (Monday - Friday) Job Summary We're looking for detail-oriented inspectors to help maintain product quality. As a Quality Control Inspector, you'll check components, in-process materials, and finished goods, keep accurate inspection records, submit samples to the lab, and report defects. You'll also have the authority to place materials on hold or halt production if needed. Key Responsibilities Inspect materials and products against standards Record inspection and test data Submit samples to the lab Report defects to Production, Shipping, and Quality management Place materials on hold or release as appropriate Halt production or shipment if safety or quality issues arise Maintain a clean and safe work area Follow all safety and food safety policies Requirements High school diploma required; training in industrial quality practices preferred Basic math skills Ability to read and follow job orders and specifications Strong attention to detail Ability to work independently Experience with inspection tools like calipers preferred Physical Demands Frequent standing, walking, bending, kneeling, crouching, and reaching Lift/move items 10-50 lbs regularly Visual acuity for close, distance, color, and depth perception Join the SMS team! It takes more than top-notch facilities, modern equipment, and innovative technologies to become our customers' most trusted supplier. It takes people who are committed to our customers' success and who are willing to go the extra mile to get the job done right. #SMS Powered by JazzHR jgvb QKIpWa

Seeking a quality control inspector to inspect carbide cutting tools including drills, reamers, and endmills. 2nd Shift M-F 2:30-11pm and Saturday 6am-11am Must know how to use micrometers, dial indicators, point micrometers and scales. Will be trained on how to perform ISO audits.

Job Description The Quality Control Inspector II plays a vital role in ensuring that products meet all design and contract requirements as defined by engineering drawings and specifications. This position is actively involved in first article, pre-production development, production, and incoming inspection stages of manufacturing and assembly. The Quality Control II Inspector is responsible for verifying product conformance through detailed inspections and documentation, ensuring all assembly, final inspection, and incoming inspection activities are complete and accurate. Once verified, products are cleared for movement into inventory and/or shipment. Responsibilities Performs inspection activities, such as complex visual and dimensional inspections on incoming, final inspections, first article inspections as well as during in-process inspection. Ensure all Quality Control documents, such as travelers and inspection sheets, are maintained daily, with all entries kept up to date and accurate. Prepare and create inspection documents such as written description of inspection results including deviation from engineering specification. Manage and assigned inspection priorities based the customer PO due dates. All shop floor and suppliers originated non-conformance (NCMR log) to be written by the Quality Control Inspector I and II for the product/processes, except for those written by QM or QA. Assists QA's with identifying nonconforming conditions that present existing or impending defective conditions at the system or subsystem level of assembly or incoming inspection, audits and preparing inspection plans such as creating inspection documents and routing, updating inspection documents and routing, and data collection and root cause analysis investigations. Provides general support of QA's including communication, Corrective Action Request processing, product evaluation, and sorting activities under exceptional circumstances, and interfacing with other team members as necessary to complete assigned tasks in support of continuous improvement initiatives using A3, 8D, statistical studies. Participates and supports problem solving activities such as Fishbone, 5-Why, Fault-tree, etc. Perform material movement transactions after completing inspection process. Use calipers, micrometers, HI-POT tester, continuity test board, thread gauges, height gauges, gauge blocks, tape ruler, steel ruler and other related inspection equipment to perform the work. Prepare inspection reports, Certificate of Conformance, and assist with FAI (First Article Inspection) reports and customer certification requirements. Communicate project status and quality challenges with department managers/leads. Guide less experience inspectors, providing solutions and maintaining rigorous quality control procedures. Support production teams in adhering to ISO 9001 processes. Participate in audits and compliance projects as assigned. Follow applicable procedures and work instruction while offering ideas for improvement. Work with cross-functional teams to ensure quality objectives are met throughout the production process Other duties as assigned Accepting this position requires candidates to complete and pass a background check.

The Quality Control Inspector II plays a vital role in ensuring that products meet all design and contract requirements as defined by engineering drawings and specifications. This position is actively involved in first article, pre-production development, production, and incoming inspection stages of manufacturing and assembly. The Quality Control II Inspector is responsible for verifying product conformance through detailed inspections and documentation, ensuring all assembly, final inspection, and incoming inspection activities are complete and accurate. Once verified, products are cleared for movement into inventory and/or shipment. Responsibilities Performs inspection activities, such as complex visual and dimensional inspections on incoming, final inspections, first article inspections as well as during in-process inspection. Ensure all Quality Control documents, such as travelers and inspection sheets, are maintained daily, with all entries kept up to date and accurate. Prepare and create inspection documents such as written description of inspection results including deviation from engineering specification. Manage and assigned inspection priorities based the customer PO due dates. All shop floor and suppliers originated non-conformance (NCMR log) to be written by the Quality Control Inspector I and II for the product/processes, except for those written by QM or QA. Assists QA's with identifying nonconforming conditions that present existing or impending defective conditions at the system or subsystem level of assembly or incoming inspection, audits and preparing inspection plans such as creating inspection documents and routing, updating inspection documents and routing, and data collection and root cause analysis investigations. Provides general support of QA's including communication, Corrective Action Request processing, product evaluation, and sorting activities under exceptional circumstances, and interfacing with other team members as necessary to complete assigned tasks in support of continuous improvement initiatives using A3, 8D, statistical studies. Participates and supports problem solving activities such as Fishbone, 5-Why, Fault-tree, etc. Perform material movement transactions after completing inspection process. Use calipers, micrometers, HI-POT tester, continuity test board, thread gauges, height gauges, gauge blocks, tape ruler, steel ruler and other related inspection equipment to perform the work. Prepare inspection reports, Certificate of Conformance, and assist with FAI (First Article Inspection) reports and customer certification requirements. Communicate project status and quality challenges with department managers/leads. Guide less experience inspectors, providing solutions and maintaining rigorous quality control procedures. Support production teams in adhering to ISO 9001 processes. Participate in audits and compliance projects as assigned. Follow applicable procedures and work instruction while offering ideas for improvement. Work with cross-functional teams to ensure quality objectives are met throughout the production process Other duties as assigned Accepting this position requires candidates to complete and pass a background check.