Quality inspector jobs in Wichita, KS

This position is responsible for completing inspection of products to ensure that all shipments comply with the customer's conformity specification, the company's quality control systems, and legal requirements. Duties and Responsibilities: Inspect product to determine compliance with order specifications and company's quality control system for compliance with legal requirements, and shipping and packing facilities for conformity to specified standards Setup and perform conventional surface plate inspection Document inspection results accurately and in a timely manner Communicate inspection results and status to Manufacturing and Engineering as applicable Generate ideas and suggestions on reducing inspection turnaround time Perform Hardness and Conductivity inspections Examine company's records to secure such information as size and weight of product and results of quality tests Complete visual inspection Verify machine finish Stamp mark of approval or rejection on product and write report of examinations. Minimum Requirements: To perform this job successfully, an individual must be able to perform each essential function and assigned task satisfactorily. The requirements listed below are representative of the knowledge, skills, competency, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or GED preferred 2+ years of manufacturing or quality experience preferred Industry experience preferred US Citizen or Permanent Resident required (ITAR compliance) Blueprint and specification interpretation competence required Experience with mechanical and configuration hardware such as fasteners, brackets, wire forms, seals, connectors, required Mechanical inspection skills including use of calipers, micrometers, optical comparator, thread gauges, and Hardness tester etc.required Ability to perform vendor test, material and conformance certification package reviews required Experience with First Article & Layout Inspection preferred Experience with Surface Plate Inspection preferred Basic computer skills including spreadsheets, word processing, internet research, and e-mail required Demonstrated ability to work in a team environment with little supervision required Sense of urgency required Ability to meet frequent short timeline goals and deadlines required

Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description Adhere to General Work Requirements as required in coordination with Quality leadership. Research and capture all maintenance program requirements to include Inspection Program, Airworthiness Directives, Service Bulletins, Instructions for Continued Airworthiness, etc. to establish comprehensive and accurate listings of requirements for specific model aircraft. Research all maintenance documentation for an aircraft and conduct necessary on-aircraft inspections to construct an accurate configuration of specific aircraft. Utilize research to establish aircraft maintenance requirements pertinent to customer visit and organize the results into an understandable report for delivery to customer. Supports Quality Inspectors by performing Quality Inspector duties and returning A/C to service when requested from Quality Leadership. Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA) and regulatory paperwork (FAA, FAR/CAA, etc) is complete and required approvals have been obtained. Perform walk around inspection of aircraft for release from maintenance. Perform return to service process and ensure assigned aircraft meets all airworthiness requirements prior to return to service. Train, coach and mentor employees in the performance of duties in area(s) of qualification. Provide data to customers as requested. Qualifications US Citizenship or authorized to work in the U.S. without visa sponsorship You hold a current and valid FAA Airframe and Powerplant License . You bring at least 3 years of hands-on maintenance experience working on corporate or commercial jets . You've worked on Bombardier aircraft for at least 1 year . You have at least 1 year of experience as a Quality Inspector in an aviation maintenance environment. You're skilled at planning and problem-solving , ensuring that challenges are resolved efficiently and commitments are met. You make decisions with a strategic mindset , keeping broader business goals in view while seizing opportunities. You thrive in a team-based environment , working well with others to get the job done. You have a strong “Get It Done” attitude , staying focused and driving results-even in the face of change. You're customer-focused , committed to understanding needs and building strong internal and external relationships. You're passionate about growth and development -both your own and that of those around you. You're comfortable using a wide range of measuring tools and hand tools , and can operate and interpret test equipment with confidence. You understand and can apply domestic and international regulatory requirements (FAR, CAA, RSM/QCM, FAA, AD, SB, CFR, TCDS, etc.). You're proficient with essential software tools such as Excel, Access, Word, Quality Maintenance Tracking systems, SAP, AMS, and internet-based platforms. You have a thorough understanding of return-to-service procedures and the relevant SAP applications involved. You communicate clearly and effectively in English-both spoken and written . You have the ability to train, coach, and mentor others , helping team members grow and succeed in their roles. Additional Information Here's a heads-up of the upcoming steps: Phone Interview with Recruiter: We'll begin with an introductory call to discuss your background and interest in the role. Interview with the Hiring Manager Offer Letter : We´ll extend you an offer and start the onboarding process. Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions You start your next challenge!

The Figeac Aero Group has multiple locations across the world. Figeac Aero North America is a leading aerospace partner for detailed parts and sub-assemblies with specialization in saturation shot peening, shot peen forming, chemical processing, painting, assembly, non-destructive testing, and machining. At Figeac Aero North America, we place a high value on our employees. Employees are given the opportunity to be a part of something special while achieving their career goals. We offer competitive compensation in addition to an attractive benefits package for qualified employees. Job Title: Quality Inspector Employee Type: Full Time, Hourly Reports to: Processing Manager Job Location: Wichita, KS, USA Experience: 2+ years of quality inspection in an aerospace manufacturing environment Training Shift: 1st Shift: Monday-Friday; 6:00am - 2:30pm Working Shift: 2nd Shift: Monday-Friday, 2:00pm - 10:30pm Job Duties: Inspects materials, parts, and products at internal and external receipt including different stages of production as well as from outside processing operations. Records observations, certificates of conformance, may provide first article inspection support Create NCR's if parts are Nonconforming Ensure work orders and parts from are inspected appropriately, matched, and sent for final operations. Inspection of Assemblies, Shot Peen Processing, Chemical Processing, & Painted Parts as well as Part Configuration, Detail part orientation, and final assembly to blueprint requirements. Experience with Final Inspection, a plus Requirements: High school diploma or equivalent 2+ years of quality inspection experience in an aerospace manufacturing environment Experience with inspection of Paint and Final Inspection. Experience with aerospace processing inspection, preferred Must possess excellent communication skills both written and oral. Ability to work on a team as well as independently. Must have strong organizational skills. Must be dependable and have reliable transportation to work. Must be proficient in MS Office applications. Must be able to read, analyze, and interpret blueprints, and general procedures. Must be able to interpret and understand OEM specifications Knowledge of measuring equipment (e.g. micrometers, calipers, height gages, etc.) Must be able to train on 1st Shift prior to moving to 2nd shift Working Conditions: Some overtime may be necessary with or without notice Will be exposed to constant activity that requires intermittent standing, bending, crouching, twisting, pushing, pulling, lifting, moving, and carrying light and heavy loads. The essential duties job may require the ability to stoop; to reach; to stand, to walk and sit for extended periods of time; to push and/or pull objects weighing up to 30 pounds; to lift and carry objects weighing up to 50 pounds; to use finger dexterity to operate a computer and other office equipment and hand strength to grasp files and other objects; to perceive the attributes of objects by touch; to hear and verbally exchange ideas and information with the public, staff and others on the phone and in the office. Frequently being on foot, bending, stooping, squatting, kneeling, climb stairs and kneeling and/or crouch to retrieve files and other items. Requires manual dexterity sufficient to operate small power tools and other equipment. Writing to complete reports and quality requests. Occasionally lifting and carrying (with assistance) items weighing 75-150 lbs. Must be able to wear safety PPE equipment, as required. Exposure to hot and cold work environments. Noise levels may require hearing protection. Competitive Benefits: Fantastic Medical, Dental & Vision Insurance with competitive rates Great Ancillary benefits such as individual and family YMCA memberships 10 days of vacation for newly hired employees Generous 401(k) plan that includes employer matching funds after 6 months of employment Life Insurance and disability coverage provided Employee Assistance Plan Teledoc, virtual doctor visits And more! Figeac Aero North America is an Equal Opportunity Employer. Figeac Aero North America provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionQuality Inspector (Aviation) Pay: $37-$47/hr About our client One of our prestigious clients in the global aviation and aerospace solutions industry has been operating for over 50 years. With thousands of technical professionals supporting hundreds of major aviation programs nationwide, they specialize in building, maintaining, and supporting world-class business jets and mission-critical aircraft platforms. Why join this team? Pay: $37 - $47/hr Direct-hire aviation opportunity Work within a high-impact, safety-critical environment Join a team shaping the future of aircraft quality and reliability RequirementsRequired A&P Certificate 5+ years of aircraft maintenance experience 3+ years in corporate or commercial jet environments Ability to read and interpret engineering documents and manuals Strong verbal and written communication skills Knowledge of Return-to-Service procedures and regulatory standards (FAA, CAA, FAR) Ability to work varied shifts depending on location Preferred Experience using SAP, Pivotal, and Microsoft Office Suite Proficiency with inspection tools and test equipment Familiarity with aviation forms/processes (RED, RFE, SRPSA) Customer-focused mindset What you'll do Execute Return-to-Service approvals in accordance with FAA and regulatory guidelines Perform detailed inspections on aircraft, engines, components, and tools Review and document work packages, inspection results, and maintenance actions Inspect new, repaired, or rebuilt parts for defects, conformity, and accuracy Apply now and help ensure the highest standards of safety and quality in modern aviation.

Trigo is seeking a Part Time Traveling Quality Inspector in the Wichita, KS area. Pay is $18hr. and 1st shift MUST BE BASED NEAR OR AROUND Wichita, KS. * Overall Purpose The Traveling Quality Inspector is a vital part of the first line of defense to keep the assembly process running smoothly. Ability to travel on a flexible schedule as needed with variable lengths of time and distances. * May Report to Site Manager Responsibilities Operations • Check/inspect manufactured parts or products for defects • Read and follow work instructions and general processes • Use measuring or testing equipment as needed • Ensure products meet quality standards • Bring parts into compliance by de-burring, de-rusting, grinding, etc. • Utilize gages and other measurement tools • Display excellent customer service • Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management • Collect and record data Technical • Utilize company portal for time recording and policy acknowledgements Other • Any other duties as assigned * Organization & Management * This position does not include supervisory responsibilities * Technical * Must be able to use basic hand tools such as gaging, drills, taps, grinders and/or sanders to repair and/or clean parts and/or sub-assemblies * Must be able to read basic blueprints to determine tolerance of parts and/or sub-assemblies * In proximity to moving, mechanical parts and machinery Knowledge, skills, abilities Hard skills Values & attitudes * Demonstrated knowledge of tools, practices, and industry quality standards * Demonstrated expert level proficiency in Microsoft Excel and working knowledge of MS Word and MS PowerPoint * Understanding of database principles and knowledge of MS Access * Global team spirit * Team player * Caring for people * Open-minded * Excellence * Reactive * Resilient to pressure * Rigorous * Customer focus * Customer oriented * Reliable & trustworthy * Flexible * Initiative * Autonomous * Innovative * Daring Work experience Overall recommendations * Basic knowledge of materials and production processes * Basic knowledge of quality control methods Education background Overall recommendations * High School Diploma Required About TRIGO Global Quality Solutions Founded in 1997, TRIGO is a multinational company providing operational Quality Management solutions for the manufacturing sector, especially in the automotive and aerospace industries. With a team of more than ten thousand professionals present in 20+ countries across 4 continents, TRIGO offers a comprehensive portfolio of Quality Assurance services ranging from inspection to expert auditing, consulting and training. The unrivaled expertise, industrial mindset and extensive global footprint that TRIGO has built up over the last 3 decades has made TRIGO the leading quality solutions provider using the latest innovative and reliable digital systems and standard processes, delivering results in the most demanding industries. TRIGO has recently started to expand its clientele by offering quality services to the medical, chemical and food industries. TRIGO Global Quality Solutions is committed to the core values of equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability. TRIGO Global Quality Solutions appreciates receiving all expression of interest; however, only those candidates invited for an interview will be contacted.

We are seeking a meticulous and experienced Aircraft Quality Inspector to ensure the safety, reliability, and compliance of aircraft maintenance and manufacturing processes. The ideal candidate will possess a strong understanding of aviation standards and demonstrate exceptional attention to detail in inspecting aircraft components, systems, and documentation. Key Responsibilities Conduct detailed inspections of aircraft, components, and systems to ensure compliance with FAA regulations, company standards, and manufacturer specifications Review maintenance records, work orders, and technical documentation for accuracy and completeness Perform audits of maintenance procedures and ensure adherence to quality control protocols Identify and report discrepancies, defects, or non-conformities, and recommend corrective actions Collaborate with maintenance teams, engineers, and regulatory authorities to resolve quality issues Maintain accurate inspection logs, reports, and records in accordance with regulatory requirements Participate in continuous improvement initiatives and contribute to quality assurance training programs Stay current with industry regulations, safety standards, and technological advancements Qualifications High school diploma or equivalent (Associate's or Bachelor's degree in Aviation Technology or related field preferred) Previous experience in aircraft inspection required (at least 1 year) Strong knowledge of FAA regulations, AS9100 standards, and aircraft systems Proficiency in reading and interpreting technical manuals, blueprints, and schematics

Job Posting Important Recruitment Information for this vacancy Required documents uploaded by: January 05, 2026 Kansas Department of Health and Environment: Our agency is led by Secretary Janet Stanek, who was appointed by Gov. Kelly in Dec 2021. KDHE is comprised of three divisions: Public Health, Environment, and Health Care Finance (which includes the State's Medicaid program, KanCare). We are the only agency in the nation to have these three entities under one roof which allows us to take a holistic approach to improving and protecting the health and well-being of all Kansans. Verification of identity and employment eligibility to work in the United States is required by federal law. For a list of acceptable documents that establish these criteria, please refer to the federal Form I-9. KDHE does not provide sponsorships for this position. E-Verify: Kansas Department of Health and Environment (KDHE) participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the U.S. For additional information regarding E-Verify, please click here. For additional information regarding Immigrant and Employee Rights (IER) please click here. *********************** About the Position * Who can apply: External (Open to Anyone) * Classified/Unclassified Service: Unclassified * Full-Time/Part-Time: Full-Time * Regular/Temporary: Regular * Work Schedule: Monday-Friday, 8am-5pm (Flexible schedules available) * Eligible to Receive Benefits: Yes * Veterans' Preference Eligible: Yes * Sponsorship: KDHE does not provide sponsorship for this position. Compensation: * Pay Range: $22.72-$23.87 * Salary can vary depending upon education, experience, or qualifications. Employment Benefits Comprehensive medical, mental, dental, vision, and additional coverage Sick & Vacation leave Work-Life Balance programs: parental leave, military leave, jury leave, funeral leave Paid State Holidays (designated by the Governor annually) Fitness Centers in select locations Employee discounts with the STAR Program Retirement and deferred compensation programs Visit the Employee Benefits page for more information… Position Summary & Responsibilities Position Summary: The position (K046348) Position Summary & Responsibilities: COMPLIANCE INSPECTIONS, REPORTS, AND FOLLOWUP: Performs inspections and evaluations of Class I, Class II, MACT, and B sources as assigned in annual Work Plan to determine compliance with federal and state regulations. Conducts inspections of Open Burn sites and analyzes/issues Open Burn site authorizations when appropriate. Provide Method 9 (opacity) oversight and occasionally samples, monitors and conducts air tests (RATAs). Compiles and analyzes inspection findings and monitoring records to interpret and document compliance status. Inspection report documentation is conducted in accord with established work plan protocols and contains detailed narratives, photographic evidence, analytical results, and related information verifying compliance determinations. Follow-ups compliance issues by tracking and monitoring status of corrective actions implemented and determines when to refer to the District Environment Administrator (DEA) for issuance of Letters of Warning. As required, serves as a witness in administrative hearings or enforcement proceedings. Job Responsibilities may include but are not limited to the following: COMPLAINT INVESTIGATIONS: Conducts investigation of citizen complaints regarding air emission sources. Compiles, analyzes, and interprets information collected during complaint investigations and prepares and submits investigation reports in accordance with the approved BEFS/BOA Work Plan. Provide appropriate follow-up to ensure correction of any violations of federal or state regulations. Qualifications * Education: * High School, GED * Licensing & Certification: * Valid Driver's License - Incumbent is required to have and maintain a valid driver's license when operating a state vehicle, a private vehicle, or a rental vehicle for the benefit of the State * Minimum Qualifications: * Two years of experience in an environmental field and/or program. Education may be substituted for experience as determined relevant by the agency * Preferred Qualifications: * Microsoft Office and Lotus Notes * Proofreading, editing, attention to detail * Excellent oral and written communication skills * Industrial background or experience * Experience in preparing and writing inspection reports and technical correspondence * Post-Offer, Pre-employment Requirements: * Kansas Tax Clearance Certificate: A valid Kansas Tax Clearance Certificate is a condition of employment for all employees of the State of Kansas. Applicants (including non-residents) who receive a formal job offer for a state job, are required to obtain a valid Tax Clearance within ten (10) days of the job offer. A Tax Clearance can be obtained through the Kansas Department of Revenue who reviews individual accounts for compliance with Kansas Tax Law. If you have a missing tax return(s) or you owe taxes to the State of Kansas, please know that the Kansas Department of Revenue will work with you. The Kansas Department of Revenue can set you up on a payment plan to receive a Tax Clearance so you can get a job working for the State of Kansas. The Kansas Department of Revenue can be contacted at ************. Kansas Department of Revenue - Tax Clearance Frequently Asked Questions Recruiter Contact Information Name: Tracey N. Benson Email: ********************** Mailing Address: 1000 SW Jackson St. Suite 580 Topeka, KS 66612 Job Application Process * First Sign in or register as a New User. * Complete or update your contact information on the Careers> My Contact Information page. *This information is included on all your job applications. * Upload required documents listed below for the Careers> My Job Applications page. *This information is included on all your job applications. * Start your draft job application, upload other required documents, and Submit when it is complete. * Manage your draft and submitted applications on the Careers> My Job Applications page. * Check your email and My Job Notifications for written communications from the Recruiter. * Email - sent to the Preferred email on the My Contact Information page * Notifications - view the Careers> My Job Notifications page Helpful Resources at jobs.ks.gov: "How to Apply for a Job - Instructions" and "How to Search for a Job - Instructions" Required Documents for this Application to be Complete Upload these on the Careers - My Job Applications page Transcripts DD214 (if you are claiming Veteran's Preference) Upload these on the Attachments step in your Job Application * Resume * Cover Letter Helpful Resources at jobs.ks.gov: "How, What, & Where do I Upload Documents" How to Claim Veterans Preference Veterans' Preference Eligible (VPE): Former military personnel or their spouse that have been verified as a "veteran"; under K.S.A. 73-201 will receive an interview if they meet the minimum competency factors of the position. The veterans' preference laws do not guarantee the veteran a job. Positions are filled with the best qualified candidate as determine by the hiring manager. Learn more about claiming Veteran's Preference How to Claim Disability Hiring Preference Applicants that have physical, cognitive and/or mental disabilities may claim an employment preference when applying for positions. If they are qualified to meet the performance standards of the position, with or without a reasonable accommodation, they will receive an interview for the position. The preference does not guarantee an applicant the job, as positions are filled with the best qualified candidate as determined by the hiring manager. Learn more about claiming Disability Hiring Preference PLEASE NOTE: The documentation verifying a person's eligibility for use of this preference should not be sent along with other application materials to the hiring agency but should be sent directly to OPS. These documents should be sent either by fax to *************, scanned and emailed to *************************, or can be mailed/delivered in person to: ATTN: Disability Hiring Preference Coordinator Office of Personnel Services Landon State Office Building 900 SW Jackson, Rm 401 Topeka, KS 66612 Equal Employment Opportunity The State of Kansas is an Equal Opportunity Employer. We value diversity, equity, and inclusion as essential elements that create and foster a welcoming workplace. All qualified persons will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, political affiliation, disability or any other factor unrelated to the essential functions of the job. If you wish to identify yourself as a qualified person with a disability under the Americans with Disabilities Act and would like to request an accommodation, please address the request to the agency recruiter.

Job DescriptionJoin our client's team in Kansas City! Are you passionate about ensuring airworthiness and safety in aircraft maintenance? Our client, a leading aircraft component service organization, is seeking a Quality Control Inspector with a keen eye for detail. If you thrive on precision and excellence, this role is perfect for you.Job Summary: As a Quality Control Inspector, you will play a crucial role in ensuring all maintenance work meets airworthiness standards and regulatory requirements. You will conduct various inspections on aircraft components to determine serviceability and airworthiness, ensuring compliance with technical data and documentation standards. Responsibilities: Perform preliminary, routine, and in-process inspections on aircraft and components. Document maintenance activities following relevant regulations and standards. Conduct final buy-back of maintenance and issue airworthiness releases. Monitor compliance with safety regulations and scrap bin policies. Provide oversight, guidance, and assistance on the floor. Conduct facility audits for regulatory compliance. Complete OJT documentation and maintain training records. Qualifications: Minimum three years of heavy aircraft maintenance or aircraft component maintenance experience. FAA Airframe and Powerplant (A&P) License required. Knowledge of technical and regulatory documentation interpretation. Strong communication skills and ability to work effectively in a team. Proficiency in MS Office and basic computer skills. Ability to work various shifts and schedules. Prior NDI and QC experience preferred. Benefits: We offer a competitive hourly rate, full benefits package, and a dynamic work environment that fosters growth and development. If you are ready to take the next step in your aviation career, apply now for the Quality Control Inspector position at Kansas City.

ST JOB TITLE: Quality Inspector Location: Park City, Kansas Schedule: M-F 1st Shift: 7am-3pm2nd shift: 3pm-12am3rd shift: 12am-7am Hourly Pay: $16.25 Term: Contract potential Temp-Hire JOB DESCRIPTION Role and Responsibilities Evaluate raw materials and components for compliance with specifications and industry standards before production. Monitor production processes at various stages to ensure adherence to quality standards and identify defects early. Maintain accurate records of inspection findings, including measurements, defect reports, and compliance checks. Recognize and categorize defects, non-conformities, and deviations from specifications, providing detailed reports to management. Develop and enforce quality inspection processes that align with industry standards Investigate quality issues to determine root causes and support the implementation of corrective actions. Qualifications and Education Requirements Experience working in a manufacturing/production environment. Ability to work independently and with others. High school diploma or GED Physical Demands and Work Environment: Must be able to read, hear, talk, drive lift trucks, wear PPE, and lift up to 50 lbs. repetitively. Drug screen closed toed shoes, steel toed if you have, jeans with no holes, NO athletic wear, or leggings Background check

Job Title: Quality TechnicianJob Description As a Quality Technician, you will operate and maintain surface finishing equipment, including anodizing tanks, plating baths, and coating systems, in accordance with aerospace standards. You will prepare aerospace-grade materials and components for finishing, conduct process trials, inspections, and quality checks to ensure compliance with customer and regulatory specifications. Additionally, you will support engineers in developing and validating finishing processes for new aerospace programs and document process parameters, inspection results, and corrective actions for traceability and continuous improvement. Responsibilities + Operate and maintain surface finishing equipment, ensuring adherence to aerospace standards. + Prepare aerospace-grade materials and components for finishing processes. + Conduct process trials, inspections, and quality checks to ensure compliance with specifications. + Support engineers in developing and validating new aerospace finishing processes. + Document process parameters, inspection results, and corrective actions. + Ensure strict adherence to environmental, health, and safety protocols, including hazardous materials handling. + Collaborate with quality assurance and production teams to resolve technical issues and improve process reliability. + Train operators and technicians on aerospace finishing procedures and equipment usage. + Travel to customer and supplier sites for audits, troubleshooting, and technical support. Essential Skills + Minimum 2-3 years of experience operating and maintaining surface treatment equipment in a manufacturing environment. + Proficiency in surface finishing techniques such as anodizing, plating, etching, and coating. + Familiarity with aerospace quality standards (AS9100, ISO 9001) and regulatory compliance requirements, including ITAR. + Ability to interpret technical drawings, process specifications, and inspection criteria. Additional Skills & Qualifications + Associate degree or technical diploma in Materials Science, Chemistry, Mechanical Engineering, or related field, or equivalent hands-on experience in aerospace finishing processes. Work Environment Work in a dynamic environment where you will gain hands-on experience with advanced processes such as chemical treatments and coatings. Collaborate with skilled professionals who value precision, safety, and continuous improvement, and enjoy a competitive package with comprehensive benefits, PTO, and performance-based incentives. Job Type & Location This is a Permanent position based out of Wichita, KS. Pay and Benefits The pay range for this position is $75000.00 - $93000.00/yr. Health & Wellness: Medical, dental, and vision coverage to keep you and your family healthy. Financial Security: 401(k) retirement plan with employer match to help you plan for the future. Paid Time Off: Generous PTO for vacation, personal time, and holidays. Life Insurance: Coverage included for peace of mind. Career Development: Training programs, certifications, and tuition reimbursement to help you advance. Additional Perks: Performance-based bonuses and parental leave with personalized return-to-work support. Workplace Type This is a fully onsite position in Wichita,KS. Application Deadline This position is anticipated to close on Jan 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Weckworth Manufacturing, Inc. Job Description: Quality Inspector Reports To: Director of Quality & Quality Supervisor We have an immediate full-time job opening for a Quality Inspector with a 4-day work week schedule and OT on Friday/Saturday as needed. We are looking for an individual who will be responsible for the inspection of all outgoing textile products. This ideal candidate will possess a trained eye for detail and will provide support to the assigned production team to ensure that the products are built in accordance with customer and quality requirements while maintaining production flow. Will work with both production and engineering personnel to resolve any quality issues. Duties and responsibilities: Examines material goods & products on the production line & either approves or rejects items based on engineering requirements. Perform First Article Inspecting (FAI), approving In-Process Inspection and Final Inspection. Conduct visual and measurement tests. Advise & communicate required adjustments or corrections action to take to the Production Leads/ Supervisors & Directors. Documenting inspections results by completing reports and logs per company procedures. All other activities and duties will be assigned by supervisor. Maintain a clean and safe work environment. Qualifications: Minimum 1+ year continuous Quality Inspector position & experience in a manufacturing environment. MUST be able to analyze, read and interpret blueprints, tape measure, calipers, and other testing/measuring tools. (TESTING will be administered) Knowledge of GD&T. Ability to recognize & report issues to appropriate depts., leads/supervisors. Ability to communicate effectively. Accuracy and attention to detail is imperative Ability to use computer for research and review documents (Microsoft Office). Work independently and with a group, remaining focused, energetic, hardworking and dependable. Must be able to work standing 10 hrs. a day, bend, lift, and carry up to 25 lbs. Ability to work in a fast pace non-aerospace environment and perform multiple tasks at once to meet deadlines. Job Type: Full-time, Mon- Thurs. 6:30am -5:00pm & OT on Fri/Sat as needed Compensation: $17-21/hour Competitive wage and benefit package. Weckworth Manufacturing, Inc. is a proud Equal Opportunity Employer. We provide equal opportunity to employees and applicants without regard to race, color, religion, gender, gender identity, sexual orientation, age, national origin, ancestry, disability, veteran status, or any other protected group covered by applicable federal, state, or local equal employment laws and regulations. Applicants with a disability that need any accommodation to complete the Weckworth Manufacturing, Inc. application process, or otherwise need assistance or accommodation in the recruiting process, should contact Human Resources at ************. All applicants must submit a resume or apply in person at 128 Baughman Ave, Haysville, KS 67060 fax- ************, HUMAN RESOURCES. Texting Privacy Policy and Information: Message type: Informational; you will receive text messages regarding your application and potentially regarding interview scheduling. Message frequency will vary depending on the application process. Msg & data rates may apply. OPT out at any time by texting “Stop”.

**ASnapshot of Your Day** Quality inspections consist of physical inspections as well as inspection of documentation. Quality inspectors conduct inspections of materials identified by the technology team. Inspections are conducted through the inspection control plans outlined in the current SAP system. **How You'll Make an Impact** + Perform required inspections, checks, analyses, and maintain accurate documentation to ensure compliance with quality standards, customer requirements, and regulatory specifications + Review production records for adherence to established procedures + Evaluate non-conformances and document findings for engineering dispositions in accordance with Siemens Energy QMS + Work independently or collaboratively within a team environment + Demonstrate aptitude for learning and willingness to cross-train across all quality areas + Successfully complete a quality competency test **What You Bring** + High School Diploma, GED, or equivalent experience + Business and technical writing experience + SAP experience preferred + Proficiency in using precision quality measuring tools and equipment + Strong critical thinking and problem-solving skills and basic project management capabilities + Applicants must be legally authorized for employment in the UnitedStates without need for current or future employer-sponsored workauthorization. Siemens Energy employees with current visa sponsorship maybe eligible for internal transfers. **Who is Siemens Gamesa?** Siemens Gamesa is part of Siemens Energy, a global leader in energy technology with a rich legacy of innovation spanning over 150 years. Together, we are committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. As a leading player in the wind industry and manufacturer of wind turbines, we are passionate about driving the energy transition and providing innovative solutions that meet the growing energy demand of the global community. At Siemens Gamesa, we are constantly seeking individuals to join our team and support our focus on energy transformation **Rewards/Benefits** + Career growth and developmentopportunities + Supportive work culture + Company paid Health andwellness benefits + Paid Time Off and paid holidays + 401K savings plan with companymatch + Family building benefits + Parental leave Equal Employment Opportunity Statement Siemens Energy is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

Ensures that products meet or exceed quality standards and ASME code by inspecting welds, subassemblies, production parts, purchased goods, and completed boilers. Reports any substandard quality and discrepancies to the Quality Control (QC) Manager. Responsibilities: Inspection of code plate, tubes, and pipe upon delivery; verification of heat numbers to mill test reports Verification of Material Test Reports to code requirements per applicable ASME section Verification of plate, after cutting, for code acceptability (i.e. thickness, heat number and slab number, width, length and layout of hand holes or fittings per drawing) Visual inspection of welds for defects to ASME code requirements; verification of welders' ID & stamp Verify nozzle and fitting layouts, tube sheet insertion into shell, out of roundness, level of tube sheets, welding gaps at fit -up, and other various dimensions against drawings Verify stamping to conform to drawings and apply code stamp to boiler with applicable symbol Issues and writes non -conformance reports per QC Manual Witnesses or conducts testing of boilers, using the hydrostatic test procedure for tube or pressure retaining parts for leakage to applicable code Responsible for maintaining calibrations and documentation of calibrations per SBW QC Manual Verify welders are welding within the parameters of applicable WPS; verifying welders continuity logs Prompt, dependable and reliable in work attendance Perform other related duties as required Requirements Must be able to communicate verbally and in writing Able to read and understand drawings and weld symbols; prior knowledge of GMAW, SMAW, FCAW, GTAW weld processes and ASME code a plus Strong computer skills including Microsoft Word, Excel, Outlook Able to use, read, and understand measuring tools (i.e., tape measure, micrometer, level, etc.) Must be able to pass Jaeger near vision test Able to work well with others in a team environment Organized, accurate with numbers and detailed information Can sit, stand, climb stairs, lift up to 50lbs alone, bend, stoop, and squat, or do so with reasonable accommodation Capable of maintaining regular and reliable attendance Benefits Competitive Salaries Medical and Dental Insurance Covered 100% by Superior Boiler for Employees & Families PTO Day 1 401k with Company Matching Vision Insurance Short -Term Disability Critical Illness Insurance Accident Insurance Life Insurance Flex Spending Accounts Health Savings Accounts

This position is responsible for completing inspection of products to ensure that all shipments comply with the customer's conformity specification, the company's quality control systems, and legal requirements. Duties and Responsibilities: Inspect product to determine compliance with order specifications and company's quality control system for compliance with legal requirements, and shipping and packing facilities for conformity to specified standards Setup and perform conventional surface plate inspection Document inspection results accurately and in a timely manner Communicate inspection results and status to Manufacturing and Engineering as applicable Generate ideas and suggestions on reducing inspection turnaround time Perform Hardness and Conductivity inspections Examine company's records to secure such information as size and weight of product and results of quality tests Complete visual inspection Verify machine finish Stamp mark of approval or rejection on product and write report of examinations. Minimum Requirements: To perform this job successfully, an individual must be able to perform each essential function and assigned task satisfactorily. The requirements listed below are representative of the knowledge, skills, competency, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or GED preferred 2+ years of manufacturing or quality experience preferred Industry experience preferred US Citizen or Permanent Resident required (ITAR compliance) Blueprint and specification interpretation competence required Experience with mechanical and configuration hardware such as fasteners, brackets, wire forms, seals, connectors, required Mechanical inspection skills including use of calipers, micrometers, optical comparator, thread gauges, and Hardness tester etc.required Ability to perform vendor test, material and conformance certification package reviews required Experience with First Article & Layout Inspection preferred Experience with Surface Plate Inspection preferred Basic computer skills including spreadsheets, word processing, internet research, and e-mail required Demonstrated ability to work in a team environment with little supervision required Sense of urgency required Ability to meet frequent short timeline goals and deadlines required

Job Description The Figeac Aero Group has multiple locations across the world. Figeac Aero North America is a leading aerospace partner for detailed parts and sub-assemblies with specialization in saturation shot peening, shot peen forming, chemical processing, painting, assembly, non-destructive testing, and machining. At Figeac Aero North America, we place a high value on our employees. Employees are given the opportunity to be a part of something special while achieving their career goals. We offer competitive compensation in addition to an attractive benefits package for qualified employees. Job Title: Quality Inspector Employee Type: Full Time, Hourly Reports to: Processing Manager Job Location: Wichita, KS, USA Experience: 2+ years of quality inspection in an aerospace manufacturing environment Training Shift: 1st Shift: Monday-Friday; 6:00am - 2:30pm Working Shift: 2nd Shift: Monday-Friday, 2:00pm - 10:30pm Job Duties: Inspects materials, parts, and products at internal and external receipt including different stages of production as well as from outside processing operations. Records observations, certificates of conformance, may provide first article inspection support Create NCR's if parts are Nonconforming Ensure work orders and parts from are inspected appropriately, matched, and sent for final operations. Inspection of Assemblies, Shot Peen Processing, Chemical Processing, & Painted Parts as well as Part Configuration, Detail part orientation, and final assembly to blueprint requirements. Experience with Final Inspection, a plus Requirements: High school diploma or equivalent 2+ years of quality inspection experience in an aerospace manufacturing environment Experience with inspection of Paint and Final Inspection. Experience with aerospace processing inspection, preferred Must possess excellent communication skills both written and oral. Ability to work on a team as well as independently. Must have strong organizational skills. Must be dependable and have reliable transportation to work. Must be proficient in MS Office applications. Must be able to read, analyze, and interpret blueprints, and general procedures. Must be able to interpret and understand OEM specifications Knowledge of measuring equipment (e.g. micrometers, calipers, height gages, etc.) Must be able to train on 1st Shift prior to moving to 2nd shift Working Conditions: Some overtime may be necessary with or without notice Will be exposed to constant activity that requires intermittent standing, bending, crouching, twisting, pushing, pulling, lifting, moving, and carrying light and heavy loads. The essential duties job may require the ability to stoop; to reach; to stand, to walk and sit for extended periods of time; to push and/or pull objects weighing up to 30 pounds; to lift and carry objects weighing up to 50 pounds; to use finger dexterity to operate a computer and other office equipment and hand strength to grasp files and other objects; to perceive the attributes of objects by touch; to hear and verbally exchange ideas and information with the public, staff and others on the phone and in the office. Frequently being on foot, bending, stooping, squatting, kneeling, climb stairs and kneeling and/or crouch to retrieve files and other items. Requires manual dexterity sufficient to operate small power tools and other equipment. Writing to complete reports and quality requests. Occasionally lifting and carrying (with assistance) items weighing 75-150 lbs. Must be able to wear safety PPE equipment, as required. Exposure to hot and cold work environments. Noise levels may require hearing protection. Competitive Benefits: Fantastic Medical, Dental & Vision Insurance with competitive rates Great Ancillary benefits such as individual and family YMCA memberships 10 days of vacation for newly hired employees Generous 401(k) plan that includes employer matching funds after 6 months of employment Life Insurance and disability coverage provided Employee Assistance Plan Teledoc, virtual doctor visits And more! Figeac Aero North America is an Equal Opportunity Employer. Figeac Aero North America provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description * Adhere to General Work Requirements as required in coordination with Quality leadership. * Research and capture all maintenance program requirements to include Inspection Program, Airworthiness Directives, Service Bulletins, Instructions for Continued Airworthiness, etc. to establish comprehensive and accurate listings of requirements for specific model aircraft. * Research all maintenance documentation for an aircraft and conduct necessary on-aircraft inspections to construct an accurate configuration of specific aircraft. * Utilize research to establish aircraft maintenance requirements pertinent to customer visit and organize the results into an understandable report for delivery to customer. * Supports Quality Inspectors by performing Quality Inspector duties and returning A/C to service when requested from Quality Leadership. * Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA) and regulatory paperwork (FAA, FAR/CAA, etc) is complete and required approvals have been obtained. * Perform walk around inspection of aircraft for release from maintenance. * Perform return to service process and ensure assigned aircraft meets all airworthiness requirements prior to return to service. * Train, coach and mentor employees in the performance of duties in area(s) of qualification. * Provide data to customers as requested. Qualifications * US Citizenship or authorized to work in the U.S. without visa sponsorship * You hold a current and valid FAA Airframe and Powerplant License. * You bring at least 3 years of hands-on maintenance experience working on corporate or commercial jets. * You've worked on Bombardier aircraft for at least 1 year. * You have at least 1 year of experience as a Quality Inspector in an aviation maintenance environment. * You're skilled at planning and problem-solving, ensuring that challenges are resolved efficiently and commitments are met. * You make decisions with a strategic mindset, keeping broader business goals in view while seizing opportunities. * You thrive in a team-based environment, working well with others to get the job done. * You have a strong "Get It Done" attitude, staying focused and driving results-even in the face of change. * You're customer-focused, committed to understanding needs and building strong internal and external relationships. * You're passionate about growth and development-both your own and that of those around you. * You're comfortable using a wide range of measuring tools and hand tools, and can operate and interpret test equipment with confidence. * You understand and can apply domestic and international regulatory requirements (FAR, CAA, RSM/QCM, FAA, AD, SB, CFR, TCDS, etc.). * You're proficient with essential software tools such as Excel, Access, Word, Quality Maintenance Tracking systems, SAP, AMS, and internet-based platforms. * You have a thorough understanding of return-to-service procedures and the relevant SAP applications involved. * You communicate clearly and effectively in English-both spoken and written. * You have the ability to train, coach, and mentor others, helping team members grow and succeed in their roles. Additional Information Here's a heads-up of the upcoming steps: * Phone Interview with Recruiter: We'll begin with an introductory call to discuss your background and interest in the role. * Interview with the Hiring Manager * Offer Letter: We´ll extend you an offer and start the onboarding process. * Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions * You start your next challenge!

About our client One of our prestigious clients in the global aviation and aerospace solutions industry has been operating for over 50 years. With thousands of technical professionals supporting hundreds of major aviation programs nationwide, they specialize in building, maintaining, and supporting world-class business jets and mission-critical aircraft platforms. Why join this team? Pay: $37 - $47/hr Direct-hire aviation opportunity Work within a high-impact, safety-critical environment Join a team shaping the future of aircraft quality and reliability Requirements Required A&P Certificate 5+ years of aircraft maintenance experience 3+ years in corporate or commercial jet environments Ability to read and interpret engineering documents and manuals Strong verbal and written communication skills Knowledge of Return-to-Service procedures and regulatory standards (FAA, CAA, FAR) Ability to work varied shifts depending on location Preferred Experience using SAP, Pivotal, and Microsoft Office Suite Proficiency with inspection tools and test equipment Familiarity with aviation forms/processes (RED, RFE, SRPSA) Customer-focused mindset What you'll do Execute Return-to-Service approvals in accordance with FAA and regulatory guidelines Perform detailed inspections on aircraft, engines, components, and tools Review and document work packages, inspection results, and maintenance actions Inspect new, repaired, or rebuilt parts for defects, conformity, and accuracy

Weckworth Manufacturing, Inc. Job Description: Quality Inspector Reports To: Director of Quality & Quality Supervisor We have an immediate full-time job opening for a Quality Inspector with a 4-day work week schedule and OT on Friday/Saturday as needed. We are looking for an individual who will be responsible for the inspection of all outgoing textile products. This ideal candidate will possess a trained eye for detail and will provide support to the assigned production team to ensure that the products are built in accordance with customer and quality requirements while maintaining production flow. Will work with both production and engineering personnel to resolve any quality issues. Duties and responsibilities: Examines material goods & products on the production line & either approves or rejects items based on engineering requirements. Perform First Article Inspecting (FAI), approving In-Process Inspection and Final Inspection. Conduct visual and measurement tests. Advise & communicate required adjustments or corrections action to take to the Production Leads/ Supervisors & Directors. Documenting inspections results by completing reports and logs per company procedures. All other activities and duties will be assigned by supervisor. Maintain a clean and safe work environment. Qualifications: Minimum 1+ year continuous Quality Inspector position & experience in a manufacturing environment. MUST be able to analyze, read and interpret blueprints, tape measure, calipers, and other testing/measuring tools. (TESTING will be administered) Knowledge of GD&T. Ability to recognize & report issues to appropriate depts., leads/supervisors. Ability to communicate effectively. Accuracy and attention to detail is imperative Ability to use computer for research and review documents (Microsoft Office). Work independently and with a group, remaining focused, energetic, hardworking and dependable. Must be able to work standing 10 hrs. a day, bend, lift, and carry up to 25 lbs. Ability to work in a fast pace non-aerospace environment and perform multiple tasks at once to meet deadlines. Job Type: Full-time, Mon- Thurs. 6:30am -5:00pm & OT on Fri/Sat as needed Compensation: $17-21/hour Competitive wage and benefit package. Weckworth Manufacturing, Inc. is a proud Equal Opportunity Employer. We provide equal opportunity to employees and applicants without regard to race, color, religion, gender, gender identity, sexual orientation, age, national origin, ancestry, disability, veteran status, or any other protected group covered by applicable federal, state, or local equal employment laws and regulations. Applicants with a disability that need any accommodation to complete the Weckworth Manufacturing, Inc. application process, or otherwise need assistance or accommodation in the recruiting process, should contact Human Resources at ************. All applicants must submit a resume or apply in person at 128 Baughman Ave, Haysville, KS 67060 fax- ************, HUMAN RESOURCES. Texting Privacy Policy and Information: Message type: Informational; you will receive text messages regarding your application and potentially regarding interview scheduling. Message frequency will vary depending on the application process. Msg & data rates may apply. OPT out at any time by texting “Stop”. Powered by JazzHR vGgVrH5OnD

About the Role Kansas Hutchinson Remote vs. Office Office/Site only Company Siemens Gamesa Renewable Energy, LLC Organization Wind Power Business Unit Operations Full / Part time Full-time Experience Level Mid-level Professional A Snapshot of Your Day Quality inspections consist of physical inspections as well as inspection of documentation. Quality inspectors conduct inspections of materials identified by the technology team. Inspections are conducted through the inspection control plans outlined in the current SAP system. How You'll Make an Impact * Perform required inspections, checks, analyses, and maintain accurate documentation to ensure compliance with quality standards, customer requirements, and regulatory specifications * Review production records for adherence to established procedures * Evaluate non-conformances and document findings for engineering dispositions in accordance with Siemens Energy QMS * Work independently or collaboratively within a team environment * Demonstrate aptitude for learning and willingness to cross-train across all quality areas * Successfully complete a quality competency test What You Bring * High School Diploma, GED, or equivalent experience * Business and technical writing experience * SAP experience preferred * Proficiency in using precision quality measuring tools and equipment * Strong critical thinking and problem-solving skills and basic project management capabilities * Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. Who is Siemens Gamesa? Siemens Gamesa is part of Siemens Energy, a global leader in energy technology with a rich legacy of innovation spanning over 150 years. Together, we are committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. As a leading player in the wind industry and manufacturer of wind turbines, we are passionate about driving the energy transition and providing innovative solutions that meet the growing energy demand of the global community. At Siemens Gamesa, we are constantly seeking individuals to join our team and support our focus on energy transformation Rewards/Benefits * Career growth and development opportunities * Supportive work culture * Company paid Health and wellness benefits * Paid Time Off and paid holidays * 401K savings plan with company match * Family building benefits * Parental leave Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more.