Quality inspector jobs in Winston-Salem, NC - 63 jobs

Job Description Bunnell-Lammons Engineering, Inc. is seeking to hire a full-time Geotechnical / Construction Materials Testing Technician to visit our solid waste construction sites throughout the southeast to ensure soil, geosynthetics, and concrete are meeting construction standards. This engineering technician position earns a competitive salary, depending on experience and certification and generous benefits. The company provides in-house training, mentorship, a vehicle, and all necessary safety equipment. In addition, allowances for travel living expenses are provided for out-of-town work. Our benefits include medical, dental, vision, life insurance, and a 401(k) option. Our team works hard. We recognize their dedication through 5 year, 10 year, and 15 year service awards. Additionally, we provide fun activities, including Christmas parties, employee appreciation lunches, and more! If this sounds like the opportunity that you've been looking for, apply today! ABOUT BUNNELL-LAMMONS ENGINEERING, INC. We are a geotechnical and environmental consulting firm providing efficient and cost-effective solutions for our clients, resulting in long-term relationships. We service commercial, financial, industrial, municipal, construction, and architectural design engineering clients across the southeast. Our highly qualified staff eagerly turns tough challenges into finished projects. Drawing on the power of combined expertise, we're big believers in teamwork. And, we recognize that achieving our goals and building our legacy requires both hard work and creativity. When you work here, we encourage you to see just what you can achieve as part of a great, family-oriented team. A DAY IN THE LIFE OF A GEOTECHNICAL / CONSTRUCTION MATERIALS TESTING TECHNICIAN Working under the immediate supervision of a registered professional engineer, you work as a team member alongside site managers, general contractors, and engineers to perform the required inspection or sampling services at various environmentally regulated solid waste landfill construction projects. You monitor general contractor activities, onsite testing, and reporting of earthwork and soil construction as well as geosynthetic baseliner, closure cap, piping, and gas extraction systems. In addition, you actively collect concrete, soil, and other site materials for testing in order to ensure construction standards and specifications are being met. Being safety conscious is at the heart of all you do. As part of BLE's valuable team of engineering technicians, you are proud to be in the construction field providing quality assurance and doing your part to maintain professional and personable client-company relationships. TECHNICIAN QUALIFICATIONS Relevant education and experience Schedule flexibility Ability to work out of town for several weeks at a time Can navigate smartphones and computers for communication and recording time worked Ability to comfortably lift 50 lbs walk on slopes and perform the physical requirements of the position Efficiently work with hand tools and testing apparatuses Able to pass a drug screening Have a valid driver's license and clean driving record Enjoy working outdoors in all types of weather conditions ACI, NICET, and ICC Certifications are a plus! Are you a team player who can work under minimal supervision? Do you have great communication skills, both written and verbal? Do you thrive working outside on construction sites? Are you eager to be mentored by a professional engineer? If so, you may be perfect for this position! GEOTECHNICAL / CONSTRUCTION MATERIALS TESTING TECHNICIAN WORK SCHEDULE Work schedule can vary depending upon the time of year but typically follows normal construction daylight hours. As a Geotechnical / Construction Materials Testing Technician, schedule flexibility is preferred. ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this engineering technician job, please fill out our initial 3-minute, mobile-friendly application so that we can review your information. We look forward to meeting you! Job Posted by ApplicantPro

Job Description For 40 years, our team at Southern Fasteners & Supply, a subsidiary of Supply Technologies, has been delivering quality parts and service to a diverse base of MRO and OEM customers. We are looking for a motivated, energetic person that wants a career not just a job. We work with, and supply, many high-profile customers, so a desire to be the best you can be is important. Our growing company is a top supplier of fasteners to several Fortune 500 companies Job Summary: We are seeking a diligent and detail-oriented Quality Inspector to join our team and ensure our products meet the highest standards of quality. The Quality Inspector will be responsible for conducting inspections of products and material per the required procedures, processes and specifications, including but not limited to customer specific requirements and specifications. We are seeking a talented Quality Inspector to join our team. The Quality Inspector is responsible for the following: Responsibilities: Perform visual and dimensional inspections of fasteners to ensure compliance with specifications Utilize precision measurement tools such as calipers, micrometers and gages Identify and document any non-conformities or defects Record and analyze inspection data and prepare detailed reports Collaborate with Purchasing, Sales and Supplier to resolve quality issues Ensure adherence to all safety and quality standards and regulations Maintain a clean and organized inspection area Maintain files according to policies and procedures Proactively identify and propose process improvements to create efficiencies where possible Must Haves: High school diploma or equivalent Strong attention to detail and accuracy Strong organizational skills with the ability to maintain a clear focus on all priorities. Good understanding of quality control standards and practices Basic computer skills for data entry and report generation WE Value: Previous experience in quality inspection or quality control Ability to read and interpret blueprints and technical drawings Proven ability and experience working with data and having a high degree of accuracy Proficient communication skills both written and verbal. OUR Team Members: Do The Right Thing and we will succeed: We insist on honest and ethical behavior; We treat others respectfully; Our actions are underlined with high integrity; We partner with others who hold these same values. Go One Better to achieve greatness: We strive to do our best every day; We are curious and seek alternative viewpoints; We value innovation to deliver long-term success; We will not accept the status quo and tirelessly seek to improve. Customer First balanced with Company results: We serve our customers with a sense of urgency; We strive to anticipate our customer's needs; We work with our customers to ensure we are providing them the best solutions they value; We help to deliver the long-term success of our company. WE DO what we say: We seek clarity and understanding; We follow through on our commitments; We respectfully challenge and collaborate to achieve mutual success; Once we agree, we move forward and make no excuses. Together we win: We respect and value each other's thoughts and opinions; We make the time to develop meaningful relationships; We seek new opportunities to continuously learn: We never miss an opportunity to bring out the best in others. Make a career at SUPPLY TECHNOLOGIES: Career Development: Success starts from within, and we will help you chart your path from which you can enhance your career evolution. Supply Technologies provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Job Type: Full-time Benefits: Medical insurance Health saving account Dental insurance Vision insurance Life insurance 401(k) Pension Plan Paid time off Referral program Tuition reimbursement Employee Assistance Work Location: On Site ( Winston-Salem, NC) Make a career at Southern Fasteners/Supply Technologies: Career Development: Success starts from within, and we will help you chart your path from which you can enhance your career evolution.

Job DescriptionDescription: UTILIZE INTERNAL SYSTEMS SOFTWARE WITH MICROSOFT OFFICE TO IDENTIFY AND ASSESS TRENDS IN QUALITY CUSTOMER-RELATED DATA ENTRY IN PREPARATION FOR CUSTOMER SHARING DAILY ASSESSMENT OF PRODUCTION TICKETS FOR QUALITY ISSUES AND SHIPMENT APPROVAL MONITOR KNITTING MACHINE AND WARPING OPERATION QUALITY, ESCALATING ISSUES AS NEEDED COMMUNICATE YARN QUALITY ISSUES TO LEADERSHIP, INCLUDING PLACING MACHINE ON HOLD IF NECESSARY SUPPLIER COMMUNICATION OF RAW MATERIAL ISSUES CUSTOMER AND SUPPLIER VISIT SUPPORT, AS REQUESTED ASSESSMENT OF FABRIC SAMPLES FOR IDENTIFYING QUALITY CONCERNS MANAGE SUPPLIER DOCUMENTATION REGARDING CLAIMS AND RETURNS MANAGE INCOMING NONCONFORMANCE REPORTS FROM CUSTOMERS AND ASSIST IN DEVELOPMENT, IMPLEMENTATION, AND LOGGING OF CORRECTIVE ACTIONS Requirements: HIGH SCHOOL GRADUATE. EDUCATION BEYOND HIGH SCHOOL PREFERRED. AT LEAST THREE (3) YEARS IN MANUFACTURING ENVIRONMENT PREFERRED, AUTOMOTIVE MANUFACTURING A PLUS. EXPERIENCE IN TEXTILE MANUFACTURING IDEAL BUT NOT REQUIRED. MINIMUM OF ONE (1) YEAR EXPERIENCE IN A QUALITY ROLE PREFERRED. BASIC QUALITY SYSTEM KNOWLEDGE. MUST HAVE GOOD COMMUNICATION SKILLS, BOTH VERBAL AND WRITTEN, TO INTERFACE WITH SUPPLIERS, CUSTOMERS, AND ALL LEVELS OF PERSONNEL IN THE ORGANIZATION. HIGH LEVEL OF COMPUTER SKILLS, KNOWLEDGE OF MICROSOFT OFFICE APPLICATIONS, INCLUDING WORD AND EXCEL. MUST BE DETAIL ORIENTED.

The Quality Control Technician is a vital resource who ensures the highest quality product for our customers. They collaborate with production teams to maintain quality-assurance processes, test products, analyze data, and verify product quality throughout development and manufacturing. They also play a key role in establishing a culture of quality within the organization. Key Tasks and Responsibilities Perform in-process inspections and control for all production steps, including but not limited to mixing, wax, lacquer, sizing, conditioning, inspection, and slitting. Ensures adherence to best practices and quality standards. Supports company wide quality initiatives and monitors production efficiency via standardized testing. Identifies potential issues through testing and works to improve overall quality. Communicate inspection and test results and recommend running parameter changes to relevant personnel (Quality Supervisor/Managers, Departmental Supervisors/Managers). Generate and organize proper quality documentation. Define, collaborate on, and internally communicate corrective and preventative actions. Assist in investigating quality issues arising during production or from customer feedback; investigate root causes using appropriate methodologies for corrective actions. Identify and prevent recurring quality issues through investigation and implementation of corrective actions. Cross-train and perform inspection operations as assigned. Maintain an organized, clean, and safe working environment. Other Duties as required. Skills and Abilities Effective communication: Collaborate clearly with integrated team/department to ensure consist a workflow. Ability to provide clear written Communication of inspection. Math skills: Utilize basic math skills for tasks like interpreting production specifications Quality control: Possess a keen eye for detail and the ability to distinguish colors precisely to conduct thorough quality inspections. Good understanding of failure mode and effects analysis (FMEA) concepts. Safety compliance: Demonstrate a commitment to safety by adhering to respirator requirements as per OSHA standards. Physical abilities: Meet the physical demands of the role. Technical skills: Possess basic computer skills to operate production related software and maintain digital records. Continuous improvement: Maintain a process optimization mindset. Qualifications High School Diploma or GED. 2+ years of experience in a Quality Control position, or an equivalent mix of education and experience in a manufacturing/production environment. Basic understanding of Good Documentation Practices (GDP). Familiarity with SAP/Microsoft Office.

The QA Inspector works closely with the Quality, Manufacturing and Warehouse departments to assure that all in-coming, in-process and out-going product meet specifications, are inspected on a timely basis and that documentation is correct. Essential Duties and Responsibilities Receiving inspection and test of raw materials, components and supplies, per procedure. Pulls product samples for testing and inspection. Performs product audits, visual and dimensional inspections and testing using gauges and other equipment. Informs Quality Supervisor, QA Manager and Manufacturing Manager of any failures. Must follow current Good Manufacturing Practices at all times. Generates Product Certs and necessary by assuring and completeness of DHR's. Keeps accurate records of inspection through the use of inspections sheets, charts, and computer and maintains there records through a filing system (DHR). Assists Team Members as required. Performs QA Data entry. Read and interpret part drawings and Quality Plans. Makes sure all records on each lot or product are correct and filed properly. Assists the Warehouse department by having finished product ready to ship on schedule. Collect, document and store product retains. Maintains a neat, safe and clean work area. Supports quality system objectives. Follows all QA procedures and work instructions as applicable. Perform other duties as requested. BENEFITS WE OFFER - Paid time off, 11 Paid Holidays, 401K after 90 days, Shift Differential, Referral bonus program, hourly bonus program, quarterly perfect attendance, Medical (PPO or High Deductible), Dental, Vision, Short term disability, long term disability, group life insurance, supplemental life for employee, spouse and children, critical illness, accident coverage, hospital indemnity, Employee Assistance Program, Education assistance, paid jury duty, bereavement leave, service award program Qualifications Required Competencies, Skills and Experience Strong attention to detail. Familiarity of inspection tools and gages. Knowledge of computers/software. Preferred Skills Strong math and communication skills. Education and Job Experience Requirements High school diploma or GED required. Minimum 2 years' experience in Quality Control. Work Environment and Physical Demands Must be able to lift up to 25 lbs. While performing the duties of this job, the associate may be exposed to equipment and moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles. Employee may be exposed to extreme temperatures and humidity. While performing the duties of this job, the employees is regularly required to use hands to handle, or feel objects, tools, or controls. The employee frequently is required to talk, hear and use machinery; reach with hands and arms; and grasping with hands. The employee is frequently required to sit, walk; bend; twist; push and pull; stoop, twist; and crouch. Employee is occasionally required to stand, squat; climb; and kneel. The work environment and physical demands detailed above are representative of those encountered while performing the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed.

Job DescriptionConstruction Materials Testing (CMT) Technician Thompson Engineering is seeking qualified Construction Materials Testing (CMT) Technicians for multiple locations. This position is responsible for the daily oversight of construction materials testing and inspection activities on active construction sites to ensure compliance with project specifications, industry standards, and quality requirements. Ideal candidates will demonstrate flexibility and a willingness to travel across multi-states to various job sites as needed. Key Responsibilities Perform field testing of construction materials using a 40-pound nuclear density gauge Obtain concrete samples from ready-mix trucks and prepare concrete test cylinders Conduct concrete testing and transport samples to the laboratory for further analysis Collect, document, and deliver soil samples from job sites to the laboratory Observe construction activities and accurately record performance data Perform visual inspections of reinforcing steel (rebar) Maintain detailed daily field diaries documenting project activities Prepare and submit daily reports and required documentation to the Team Leader in accordance with project specifications Ensure quality and quantity standards are met on all assigned work Proactively review project documents and testing procedures to understand technical requirements Communicate professionally and ethically with clients, contractors, and team members Maintain company-owned equipment in safe, proper working condition Report any required corrective actions to the Team Leader to ensure work quality meets company standards Follow all written procedures, company policies, and safety requirements Complete field activities and reports accurately and in a timely manner Perform all duties in a professional, ethical manner Additional Responsibilities Establish personal goals for continuous improvement and job performance Maintain reliable, punctual, and regular attendance Attend and actively participate in safety meetings and training programs Perform other duties as assigned QualificationsMinimum Requirements High school diploma or equivalent Minimum of six (6) months of construction materials testing experience ACI Level I Certification (or ability to obtain) Nuclear Gauge Certification Ability to communicate effectively both verbally and in writing Valid driver's license Ability to read and write in English Willingness to travel to various job sites as required Level and compensation commensurate with experience Physical Requirements Ability to work flexible schedules and overtime as required by operational needs Ability to lift and carry a minimum of 50 pounds Ability to safely operate a company vehicle Ability to push or pull up to 400 pounds using a wheelbarrow Ability to walk, stoop, bend, climb stairs and ladders Ability to work on uneven terrain including concrete, gravel, dirt, and grass Ability to work at elevated heights and in open structures Ability to work outdoors for extended periods in varying weather conditions Ability to wear required personal protective equipment (PPE) About Thompson Engineering Founded in 1953, Thompson Engineering provides quality assurance and professional services for construction projects supporting industrial, infrastructure, and community development. Our services include drilling, materials testing, construction inspection, chemistry laboratory services, engineering design, environmental assessments, surveying, geotechnical studies, and construction management. Today, Thompson Engineering is recognized for leadership on projects that define skylines, coastlines, and transportation networks across the Southeast. From project planning and design through construction and completion, we deliver innovative solutions to complex infrastructure and building challenges for industrial, commercial, transportation, federal, and municipal clients.

Job Description TAT Technologies (Greensboro facility) is part of a multi-site, global aerospace company dedicated to our customer experience of exceeding expectations. We are the leading APU leasing and repair station for key commercial and military aircraft solutions with over 50 years of experience in the industry. We have an ambitious and fast-growing environment that believes in the power of team collaboration with the deep-rooted belief that there is no substitution to personal relationships and interactions. We offer a flexible work environment enabling talented individuals to fulfill their development goals through drive, energy, and passion for the customer. TAT Technologies is looking for a qualified Quality Inspector (APU). This position will ensure quality is maintained through documentation, workmanship and in-process surveillance while maintaining compliance of all applicable FAR's and OEM standards pertaining to Auxiliary Power Units (APU), aviation parts, material, processes and product for TAT Technologies. Primary Job Functions: Audit work order packages for accuracy and completeness. Perform final inspection and return to service on products delivered to QC. Scrap rejected parts and maintain scrap room. Perform initial inspection on customer repair orders to gather information to have the work order opened. Additional Job Functions: Perform receiving inspection on stockroom parts. Participate in the monthly internal audits as directed. Assist with build check points as needed. Assist Calibration/Librarian technician as needed. Other Quality related functions as directed by Crew Chief, Chief Inspector or Director of Quality Requirements Two-year Technical school degree or higher and/or equivalent experience. Technical Degree in Aerospace advantageous. 5-years' experience in aviation components, preferred. Airframe & Powerplant (A&P) License recommended. Able to obtain Repairman Certificate within 3 months of hire date if not a current Licensed A&P Thorough working knowledge of and ability to interpret FAA regulations. Experience with FAA manuals and government forms. Proficient in the use of precision measurement equipment related to Aviation Inspection/s Excellent organizational skills are necessary. This job requires exemplary interaction skills with clients and auditors. Demonstrated oral & written communication skills and good telephone manner. Ability to operate standard office equipment and good PC skills (MS Word, Excel, Outlook & Quantum). Overtime and shift/schedule flexibility, required Benefits TAT Technologies is dedicated to providing an inclusive, fun, and unique workplace. We believe in acknowledging and appreciating the value of our team members. One way we value our team is by providing a comprehensive and expansive benefits offering to include Major Medical, Dental, Vision, Life, 401K with company matching, STD, LTD, accidental coverages, EAP, and more. Insurance carriers vary based on location. Equal Employment Opportunities - TAT TECHNOLOGIES is committed to maintaining a supportive, healthy, and productive work environment free from discrimination, harassment, or bullying, and complying with all legislative requirements. This includes equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran.

Job Description Monday - Thursday 5:00pm-5:00am with a 15% SHIFT PREMIUM! Machine Specialties, LLC is a leading contract machining and metal finishing company that designs an manufactures sophisticated, cost-effective solutions to meet our clients' most demanding challenges. Our company is located in Whitsett, NC, about 8 miles outside of Greensboro, NC. We are currently looking for a Quality Inspector to join our team. The Quality Inspector is responsible for completing final inspections prior to shipment, as well as in process inspections to support shop manufacturing. This role involves conducting inspections, testing, and documenting findings to maintain compliance with regulatory and company requirements. This is an hourly position that will report directly to the Quality Inspection Manager. Position Responsibilities Study and interpret product specifications to ensure product conformity Establish inspection plans and part acceptance criteria based on drawing requirements and customer feedback. Examine manufactured products, primarily aerospace machined parts, to ensure they parts meet all standards of presentation and quality Identify and communicate existing and potential quality issues Perform dimensional inspection on machined parts using a variety of precision metrology instruments such as height gages, micrometers, bore gages, etc. Collect and record data regarding defects Document and process nonconforming product Demonstrate flexibility within a fast-paced challenging environment Ability to coordinate, prioritize, and multitask Identify non-conforming materials and products, document discrepancies, and participate in root cause analysis and corrective action processes. Participate in continuous improvement initiatives to enhance the efficiency and effectiveness of the inspection and quality control processes. Follow all safety protocols and procedures to maintain a safe working environment. General Expectations Be responsible for the productivity and quality of your work and work performed in support of teams. Share skills, knowledge and experience so that common goals are achieved Continuously strive to develop skills and abilities Maintain schedule and communicate effectively with others Required Training/Education/Experience High school diploma or GED equivalent required Minimum 3 years inspection experience Machining experience preferred. Aerospace manufacturing experience is preferred. Must be able to pass a vision test, eyeglasses or contacts are acceptable. Equal Opportunity Employer including Veteran's/Disabilities

A local manufacturing company in Kernersville is currently seeking multiple Quality Control (QC) Inspectors to join their team.Job Details: Shift: 3rd shift - 11.PM -7.30 Responsibilities: Conduct detailed inspections of manufactured products Perform pressure testing on parts and equipment Operate machinery as needed to assist in production and testing Follow all company safety and cleanliness protocols Requirements: Previous manufacturing experience is required Must have inspection and machine operation experience Ability to wear and work with a respirator is required Must be willing to shower before leaving the facility each day (due to safety regulations) Monthly blood testing is required to monitor exposure levels Must pass a pre-employment physical Steel-toe boots are required #LIND26

Discover your exciting role The primary responsibilities of this position include conducting : visual inspections, checking coating thicknesses, spark testing of all coated surfaces; repairs. All listed duties are to be conducted in accordance to Fab Tech's set standards & meet all FM criteria. Explore your tasks and responsibilities * Conduct thorough visual inspections to ensure aesthetics of all parts meet Fab Tech's high quality criteria standards * Inspector will responsible for ensuring that coating thickness of parts meet mil thickness specification * Coating inspector will spark test all coated surfaces to ensure all coated surfaces within set parameters are free of defects * Coating inspectors will also be responsible for making judgement calls determining whether product needs to be reworked/repaired * Individual will be responsible for performing manual repairs on all defected parts Show your expertise POSITION REQUIREMENTS * Minimum high school diploma or equivalent. * Ability to stand on feet for up to 10 hrs. daily * Must be able to work in a fast paced work environment * Position requires the ability to make independent decisions based on standards * Attention to detail is a must * Gloves need to be worn during all visual; spark testing procedures * Note: Must pass PFT; RFT in order to wear 7700 series respirator Personal Attributes * Independent * Dependable, determined, positive in demeanor * Attention to detail. * Team player * Good attitude Physical Demands * Frequent standing, sitting, bending at the waist, and use of hands in this role is required * Specific vision abilities required to include close vision, and the ability to adjust focus * Occasionally perform physical activities including lifting (up to 50 lbs. unassisted) Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the production area is usually moderately loud. The Blast department is a sectioned off area of the production floor. Various blasting, grinding, inspecting and welding tasks are performed within the Blast department. * Safety glasses and hearing protection are required when in the production area * PPE covering eyes and skin is required when welding or heat induced cutting * PPE specific to tasks being performed is required Non-Solicitation We are not currently accepting third-party agency candidates for this position. Any agency candidate submitted to any employee of Exyte or TFS may be contacted by Exyte or TFS without obligation to the third-party agency. Employment Sponsorship Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor employment visas at this time. EEO Statement Exyte US, Inc. and its subsidiaries are proud to be an Equal Employment Opportunity employer that is committed to supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by applicable federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact Clinton Crellin via E-Mail at ************************* Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.

RK&K's Construction Management and Engineering team is currently hiring a construction inspector with interstate, roadway and bridge construction experience in the Charlotte, NC area. As a Construction Inspector with RK&K you will perform complex and routine inspections on materials, processes, safety, and documentation to ensure construction contractors conform to plans, specifications, and special provisions. Essential Functions Review drawings to prepare for the inspection Understand the design of the construction that will be inspected Document the results of the inspection and communicates to the supervisor Conduct field measurements to establish quantities for pay item documentation as well as other contract administration documentation Inspect work zones for proper traffic control setup, erosion control devices and maintenance thereof, utility coordination and right-of-way issue resolution RK&K is a full-service planning, engineering, environmental, and construction management/inspection firm serving a wide range of clients throughout the United States. Fueled by a talented and diversified staff of about 1,500 in strategically located offices, RK&K provides creative solutions to complex challenges that improve the quality of life in our communities. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Required Skills and Experience Minimum 2 years of inspection experience Valid driver's license and favorable driving record Ability to lift up to 50 pounds Preferred Skills and Experience Experience and certifications in NCDOT inspection and materials testing (earthwork, asphalt, concrete, pavement preservation and Erosion & Sedimentation Control) Experience with NCDOT's construction procedures Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Tuition reimbursement Health, dental, vision, life, and disability insurances Matching 401(k) plan Paid Holidays Much, much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today!

Job Description Production Quality Control Perform first-off inspections in all areas Perform inspections for all components shipping to Customers Perform production audits as needed Perform daily dock audits Immediately alert any product issues to management Take part measurements using various hand tools Perform Smoke Time testing Quality Assurance Assist with ISO and IATF compliance Perform needed Quality Management Program audits Assist with PPAPs Assist with creation/update of work instructions Verify correct tools/bits/routers/etc. being used for parts Create/track calibrations for all tools Monitor Inventory Levels Ensure shipping labels match inventory on skid Perform periodic inventory audits/inspections Production Support Provide back-up support for various production roles, when needed. Maintain forklift certification Support plant safety initiative & maintain safety protocols within all areas of production Report any and all issues to a member of management Abide by all Company polices including, but not limited to the following: Health and Safety, Quality and Environmental Systems, Human Resources policies, and the RMCAT Employee Handbook

We are hiring Inspector / Packagers at our Whitsett, NC plant, located at 6900 Konica Drive immediately with a start date as soon as Monday, March 17, 2025 Daytime Shift: 6:30 am to 5:00 pm, Monday through Thursday - 4 Ten hour shifts. Must be able to stand for the duration of your shift on an assembly line. We will provide the training and the tools that you need to be successful in your position. This is a job that is fast paced, working as part of a team and there is plenty of work to accomplish. We have a great place to work with awesome employees. We have 3 positions, 40 hours a week at $12.00 an hour to start. After 60 days, if you have great attendance, a willingness to learn and work as a member of a team, you will be eligible for health insurance, Paid Time off, a 401K plan, 10 Paid Holidays and a salary increase after six months. A great Zink perk is you will always enjoy every Friday, Saturday and Sunday off. You read that correctly. You will never have to work on a weekend! We are open to hiring college students, people looking for their 1st job or anyone who is willing to work. Please apply online at ******************** No outside agencies or recruiters please. For immediate consideration, apply online ******************** or send your resume to ********************* Zink is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. No recruiters or agencies. Thank you for your interest.

Join Roush Yates Manufacturing Solutions as a Full-Time Quality Control Technician and become an integral part of an innovative team dedicated to excellence in the manufacturing industry. Experience the thrill of collaborating with passionate, forward-thinking professionals who value integrity and smart problem-solving while fostering a fun and energetic culture. We offer great benefits such as Medical, Dental, Vision, 401(k) with Match, Life Insurance, Health Savings Account, Competitive Salary, and Paid Time Off. Who are we? An Introduction Roush Yates Manufacturing Solutions is a precision CNC parts manufacturing organization with expertise in multi-axis machining of metal parts with complex geometries. We produce machined parts for the automotive, aerospace, military, and industrial industries. What does a Quality Control Technician Weekend Shift do? You will be on the front lines of ensuring our products meet the highest industry standards. Your responsibilities will include conducting thorough inspections using manual, visual, and attribute methods, while expertly recording data and generating Non-Conformance reports to communicate findings to relevant parties. You'll maintain part integrity and safety during inspections, all while mentoring fellow Quality Technicians in best practices and dimensional verification. You'll operate critical equipment like CMMs, Vision systems, and Form tracers, performing data reviews on collected DCC data and pulling relevant defect tracking and dimensional reports from our database. Collaborating with our team will be essential to addressing quality issues and developing effective inspection procedures. Additionally, you'll ensure that all gauges used in the inspection process are properly verified, maintained, and calibrated, contributing to our commitment to excellence and safety in manufacturing. Are you a good fit? To excel in this role, candidates must possess a diverse skill set and extensive experience in quality control within the manufacturing realm. A minimum of 5 years in Quality Control and 5 years of running CMMs using PC-Dmis or Calypso software. Familiarity with common inspection methods, PPAPs, and FAIRs will greatly enhance your effectiveness in this role. Knowledge and skills required for the position are: Working knowledge of Microsoft Outlook, Excel and Word. Experience with Microsoft Access preferred. 5+ years' experience in Quality Control 5+ years' experience in Running CMMs (Zeiss and/or Hexagon) Familiarity with common inspection methods. Experience with PPAPs and FAIRs. Certificate, Associate's degree, or equivalent work experience in manufacturing or related technical field. In depth understanding of GD&T. Working knowledge of different types of gaging and measurement methods. Ability to communicate findings with quality teammates and production staff. Working knowledge of ISO/AS and Calibration requirements. For ITAR compliance, all employees at this location must be a US citizen or a lawful permanent resident. For more information, please visit us at ********************* and our social channels. Roush Yates is committed to individual career development while creating a diverse environment & is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, religion, sex, national origin, disability, age, or veteran status.

Perform all inspections and functional testing on all manufactured generator systems to ensure that the gear meets necessary electrical code, that the gear functions as designed by the specified engineer, and that the gear is safe to be energized on-site before it leaves the manufacturing plant. Qualification Requirements Must be able to reliably work an eight-hour minimum shift with some voluntary exceptions. To perform this job successfully, an individual must be able to perform each essential procedure safely and thoroughly. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential Functions + Locate and keep track of documentation for specific jobs. + Run procedural tests and inspections in an organized format complying with necessary functions for gear types. + Load files and test sequence of operations as dictated in project CD set notes. + Accurately record test results and component specs. + Move gear with use of forklift or pallet jack. + Removal and reinstallation of panels up to 50 lb. + Other duties as assigned. Minimum Qualifications + High school diploma, equivalent, or higher degree (Relative work experience will be considered). + NFPA70E is required (Can be provided by PowerSecure if other requirements are satisfactory). + Ability to read and interpret documents such as safety rules, operations manual, and written directions in the English language. + Ability to follow report guidelines to accurately document test results and product specifications. + Ability to add, subtract, multiply, and divide in all units of measure in order to determine splice plate length and basic voltage and amperage measurement ratios. + Ability to wear and maintain proper PPE. + Minimum of 2 years' experience working with Switchgear, Electrical, or Generator systems (unless applying for an apprenticeship position). + Engineering or programming experience will be accepted in lieu of Switchgear, Electrical or Generator experience. Knowledge, Skills and Abilities + Knowledge of diesel engines. + Understanding of electrical schematics and ability to interpret mechanical notes. + Through accumulated experience, must be able to quickly and effectively diagnose and repair nonconforming electrical circuits. + Excellent verbal and written communication skills required. Physical Demands + Limited local travel will be required. Less than 10% + Must be able to work in confined spaces and to position one's self in various positions including low to the ground or high up on equipment. + Must be able to lift 50lbs and manipulate heavy test equipment and cables. + Manual dexterity to operate digital equipment, including computers and PLC's, protective relays, controllers, and other such equipment with + small fine buttons and operators. + Must be able to work outside for extended periods of time Work Environment When running the engines, you will be working outdoors with exposure to the elements. This can include, but is not limited to, heat, cold, or rain. A risk of electrical shock is always present. At times there can be hazards from moving equipment (i.e.: forklifts). There can be a lot of ambient noise, and in some cases hearing protection must be worn. Risk of cuts or abrasions is present, especially when dealing with panels, or maneuvering between units for splice plate measurements or mechanical checks. About Us PowerSecure, a Southern Company subsidiary, is a leading provider of innovative energy solutions to electric utilities and their industrial, institutional, and commercial customers. Join Our Power Team! (https://cloud.3dissue.com/***********37/242401/HR-9-14-2020/index.html) We invest in high-value and cost-effective benefits for our employees. Our benefits package includes: + Medical, dental, vision and life insurance coverage + Competitive pay and a matching 401 (k) plan + Vacation, Company Holidays, Paid Time Off (PTO- personal and sick days) + Flexible spending accounts/Health savings account + Wellness Incentive Programs + Employee Referral Program + Tuition Reimbursement PowerSecure is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. This position is not open to third party recruiters. #ZR Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

In the Lab Tech role, you will complete performance testing and provide feedback to Operations and Quality. The role will be required to summarize information, respond to suspect material conditions, and coordinate with Quality auditing and engineering to ensure compliance to performance and inspection standards. YOUR ROLE: Use inspection equipment to analyze raw materials and finished products. Conduct performance testing for PE decking and PVC products to support Production Maintain laboratory equipment and accurate work records Perform ad hoc testing as needed to Support Production, R&D and Quality Perform incoming inspections for raw materials Support compliance requirements under direction of Quality Engineer and/ or Quality Analyst II Generate technical reports summarizing work performed and results obtained Qualifications BASIC QUALIFICATIONS: High school diploma or GED PREFERRED QUALIFICATIONS: Previous Manufacturing experience with gages American Society of Quality Certified Quality Technician or related Experience with Excel VBA Experience with Minitab software Experience with gage studies Trade school certificate in Machining, Metrology or related field

In the Lab Tech role, you will complete performance testing and provide feedback to Operations and Quality. The role will be required to summarize information, respond to suspect material conditions, and coordinate with Quality auditing and engineering to ensure compliance to performance and inspection standards. YOUR ROLE: Use inspection equipment to analyze raw materials and finished products. Conduct performance testing for PE decking and PVC products to support Production Maintain laboratory equipment and accurate work records Perform ad hoc testing as needed to Support Production, R&D and Quality Perform incoming inspections for raw materials Support compliance requirements under direction of Quality Engineer and/ or Quality Analyst II Generate technical reports summarizing work performed and results obtained Qualifications BASIC QUALIFICATIONS: High school diploma or GED PREFERRED QUALIFICATIONS: Previous Manufacturing experience with gages American Society of Quality Certified Quality Technician or related Experience with Excel VBA Experience with Minitab software Experience with gage studies Trade school certificate in Machining, Metrology or related field Additional Information COMPANY DESCRIPTION: Fortune Brands Innovations, Inc. is an industry-leading home, security and digital products company. We're focused on exciting opportunities within the home, security and commercial building markets. Our driving purpose is to elevate every life by transforming spaces into havens. We believe our work and our brands can have incredibly positive impacts for not just our business and shareholders, but for people and the planet, too. At Fortune Brands, we're building something big. We're advancing exciting innovations in all of our products and processes. We're delivering trust, dependability, sustainability, and style. To make it all happen, we've transformed our workplace into an environment where smart, ambitious people have the support to reach their fullest potential. When you join Fortune Brands, you become part of a high-performing team empowered to think big, learn fast and make bold decisions. We support an inclusive culture where everyone is encouraged be their authentic selves, and where our differences and unique perspectives are a key strength. Explore life at Fortune Brands here. ADDITIONAL INFORMATION: Fortune Brands believes in fair and equitable pay. A reasonable estimate of the base salary range for this role is Hiring Pay Range: USD - USD. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. In addition to base salary, employees will participate in either an annual bonus plan based on company and individual performance, or a role-based sales incentive plan. At Fortune Brands, we support the overall health and wellness of our associates by offering comprehensive, competitive benefits that prioritize all aspects of wellbeing and provide flexibility for our teammates' unique needs. This includes robust health plans, a market-leading 401(k) program with a company contribution, product discounts, flexible time off benefits, adoption benefits, and more. We offer numerous ERGs (Employee Resource Groups) to foster a sense of belonging for all associates. Fortune Brands is built on industry-leading brands and innovation within the high-growth categories of water, outdoors and security. The Company makes innovative products for residential and commercial environments, with a growing focus on digital solutions and products that add luxury, contribute to safety and enhance sustainability. To learn more, visit our website at fbin.com. Equal Employment Opportunity Fortune Brands is an equal opportunity employer. Fortune Brands evaluates qualified applicants without regard to race, color, religion, sex, gender identity or expression, national origin, ancestry, age, disability/handicap status, marital status, protected veteran status, sexual orientation, genetic history or information, or any other legally protected characteristic. Reasonable Accommodations Fortune Brands is committed to working with and providing reasonable accommodations to individuals with disabilities. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please contact us at [email protected] and let us know the nature of your request along with your contact information. Important Notice: Protect Yourself from Fraudulent Job Postings To protect yourself from fraudulent job postings or recruitment scams, please note that Fortune Brands job postings are exclusively hosted on our website at fbin.com/careers via our SmartRecruiters platform. Fortune Brands will never request banking information or sensitive personal details until an offer of employment has been accepted and the onboarding process begins.

TAT Technologies (Greensboro facility) is part of a multi-site, global aerospace company dedicated to our customer experience of exceeding expectations. We are the leading APU leasing and repair station for key commercial and military aircraft solutions with over 50 years of experience in the industry. We have an ambitious and fast-growing environment that believes in the power of team collaboration with the deep-rooted belief that there is no substitution to personal relationships and interactions. We offer a flexible work environment enabling talented individuals to fulfill their development goals through drive, energy, and passion for the customer. TAT Technologies is looking for a qualified Quality Inspector (APU). This position will ensure quality is maintained through documentation, workmanship and in-process surveillance while maintaining compliance of all applicable FAR's and OEM standards pertaining to Auxiliary Power Units (APU), aviation parts, material, processes and product for TAT Technologies. Primary Job Functions: * Audit work order packages for accuracy and completeness. * Perform final inspection and return to service on products delivered to QC. * Scrap rejected parts and maintain scrap room. * Perform initial inspection on customer repair orders to gather information to have the work order opened. Additional Job Functions: * Perform receiving inspection on stockroom parts. * Participate in the monthly internal audits as directed. * Assist with build check points as needed. * Assist Calibration/Librarian technician as needed. * Other Quality related functions as directed by Crew Chief, Chief Inspector or Director of Quality

Discover your exciting role The primary responsibilities of this position include conducting : visual inspections, checking coating thicknesses, spark testing of all coated surfaces; repairs. All listed duties are to be conducted in accordance to Fab Tech's set standards & meet all FM criteria. Explore your tasks and responsibilities * Conduct thorough visual inspections to ensure aesthetics of all parts meet Fab Tech's high quality criteria standards * Inspector will responsible for ensuring that coating thickness of parts meet mil thickness specification * Coating inspector will spark test all coated surfaces to ensure all coated surfaces within set parameters are free of defects * Coating inspectors will also be responsible for making judgement calls determining whether product needs to be reworked/repaired * Individual will be responsible for performing manual repairs on all defected parts Show your expertise POSITION REQUIREMENTS * Minimum high school diploma or equivalent. * Ability to stand on feet for up to 10 hrs. daily * Must be able to work in a fast paced work environment * Position requires the ability to make independent decisions based on standards * Attention to detail is a must * Gloves need to be worn during all visual; spark testing procedures * Note: Must pass PFT; RFT in order to wear 7700 series respirator Personal Attributes * Independent * Dependable, determined, positive in demeanor * Attention to detail. * Team player * Good attitude Physical Demands * Frequent standing, sitting, bending at the waist, and use of hands in this role is required * Specific vision abilities required to include close vision, and the ability to adjust focus * Occasionally perform physical activities including lifting (up to 50 lbs. unassisted) Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the production area is usually moderately loud. The Blast department is a sectioned off area of the production floor. Various blasting, grinding, inspecting and welding tasks are performed within the Blast department. * Safety glasses and hearing protection are required when in the production area * PPE covering eyes and skin is required when welding or heat induced cutting * PPE specific to tasks being performed is required Non-Solicitation We are not currently accepting third-party agency candidates for this position. Any agency candidate submitted to any employee of Exyte or TFS may be contacted by Exyte or TFS without obligation to the third-party agency. Employment Sponsorship Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor employment visas at this time. EEO Statement Exyte US, Inc. and its subsidiaries are proud to be an Equal Employment Opportunity employer that is committed to supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by applicable federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact Clinton Crellin via E-Mail at ************************* Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.