Quality inspector jobs in Wyoming - 31 jobs

Job DescriptionDescription: The Solar Quality Inspector is a field-based role responsible for ensuring that all phases of solar construction meet established quality standards, project specifications, and regulatory requirements. This position plays a critical role in verifying workmanship, materials, and installation methods through systematic inspections and documentation. The Solar Quality Inspector collaborates closely with project managers, construction teams, and the Solar Quality Lead to identify and correct deficiencies, maintain compliance with design and safety standards, and support continuous improvement across the project lifecycle. Responsibilities/Essential Functions: Review project site plans, golden row benchmark, manuals and specification documents. Maintain clear and consistent communication with all team members. Communicate quality reporting with Solar Quality Lead. Inspect and ensure quality of work performed over multiple scopes, including but not limited to: PV Piles, Electrical Piles, PCS Foundation, Racking, Torque Tubes, BHA, Slew Drive, MIB, Damper, SPC, Grounding/Bonding, Module, Wire Management, DC - Disconnect/Combiner Box - Mechanical, DC Grounding, CAB, BLA, PCS - Mechanical, SCADA Rack, J-Box - Mechanical, Agg Road Cap, CMP, Low Water Crossings, Fence, and Grounding. Utilize software for quality inspections, turnover documentation, and data collection. Exhibit a positive mindset and take ownership of responsibilities. Invest pride and care in every task, delivering work that speaks to commitment. Demonstrate a proactive safety mindset, fully aligning with and supporting company safety protocols. Maintain certifications including, but not limited to: OSHA 10, First Aid/CPR/AED, Bloodborne Pathogens, NFPA 70E, Hazard Communication, and LOTO Affected. Requirements: Education & Experience Requirements: High school diploma or equivalent required; bachelor's degree in construction management, logistics, or a related field preferred At least 2 years of experience in solar, electrical, or construction quality inspection preferred Ability to read and interpret plans, blueprints, and other technical documents Familiarity with QA/QC processes, inspection checklists, and construction documentation Working knowledge of solar project components and installation methods Strong attention to detail and ability to work efficiently in a fast-paced environment Strong communication, interpersonal, negotiation, vendor management, and leadership skills Excellent organizational, project management, prioritization, and inventory management skills Proficiency with equipment tracking and maintenance software Work Environment/Physical Requirements: This position is on site, often in remote or rural areas. Team members will be required to adhere to all safety requirements in all work environments. Requires frequent standing, walking, bending, stooping, climbing ladders, and working on elevated structures or within confined areas Requires extensive walking (2-10 miles per day) Regular exposure to construction-related hazards such as moving equipment, uneven terrain, noise, and electrical components Subject to varying weather conditions including heat, cold, wind, rain, and dust Personal protective equipment (PPE) such as a hard hat, safety glasses, gloves, high-visibility vest, and steel-toed boots must be worn as required Travel up to 100% with regular travel between project sites TAKKION is an Equal Opportunity Employer

The Opportunity Mechanical Inspector at a growth-oriented energy company. Reporting to the Chief Inspector, this position is responsible for supporting and executing a comprehensive mechanical integrity program focused on the safe, reliable, and compliant operation of fixed equipment across the refinery. This is a highly technical role requiring a strong working knowledge of API and ASME codes, Risk-Based Inspection (RBI) methodology, and damage mechanism identification. The Mechanical Inspector will lead and perform inspections, review and interpret NDE results, and develop detailed repair recommendations for pressure vessels, piping, relief devices, tanks, and other critical assets. This role plays a key part in supporting turnaround planning, equipment reliability improvements, and long-term asset strategies. The ideal candidate brings sound judgment, a proactive approach, and the ability to work cross-functionally with engineering, operations, and maintenance. This position is suited for an inspector capable of providing technical leadership and driving continuous improvement within the inspection program. Key activities include: ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Maintain accurate inspection records for all applicable refinery equipment in accordance with inspection procedures and company standards, using IDMS platforms (e.g., PCMS or equivalent) Understand and respond to basic IDMS reports including inactive CML's, equipment service, deferrals / overrides, and due dates Inspect and recommend plans for repair and replacement of refinery equipment with assistance from senior inspector(s) and engineering personnel Develop knowledge and understanding of facility operations and how the specific units impact the economics of the business Perform assigned work efficiently and effectively to maximize personal productivity Participate in risk-based inspection studies, evaluations, and recommendations Calculate the remaining life of selected equipment in accordance with ASME and API Codes Assist in the approval of plant NDE procedures Review NDE results for clarity, content and ASME/API Code compliance Assist in monitoring department costs OTHER DUTIES AND RESPONSIBILITIES Inspect equipment and evaluate data results to ensure equipment is safe for continued operation Document results of all inspections, tests, alterations, and equipment repairs in equipment history files or IDMS Assist in making NDE and inspection plans for equipment, based on damage mechanisms such as wet H2S, caustic cracking, amine corrosion, etc Make or contribute to repair decisions and issues detailed repair instructions / procedures and solicits assistance when required Review and approve welding procedures submitted by contractors Review and approve repair procedures submitted by contractors and plant maintenance personnel Complete, with assistance as needed, vendor surveillance and audits of equipment being constructed off site. This includes, but is not limited to, material verification, dimensional checks, inspection and quality assurance reviews Develop and write welding procedures for plant maintenance personnel On a limited basis, assist in the development of inspection work lists for plant turnarounds along with detailed justifications for the work to be completed Communicate well with work associates. Demonstrate ability to respect varying perspectives and work in a collaborative manner Be able to present basic technical and process calculation information in a concise and understandable manner Participate in the completion of all inspection HAZOP action items assigned through KMS or other data base Participate in the completion of all Incident Investigations or inspection follow-up items, as assigned through KMS or other data base Takes initiative to maintain and increase technical knowledge Liaise with Operations, Maintenance, and Engineering to develop inspection scopes and communicate asset health. Represent Inspection in multi-disciplinary Root Cause Analysis (RCA), Process Hazard Analyses (PHA), and other asset integrity forums Prepare technically accurate and regulatory-compliant inspection reports and repair recommendations in alignment industry regulations and company recordkeeping standards. SUPERVISORY RESPONSIBILITIES At times, assist in supervising inspection activities for contract inspectors and specialized / advanced NDE personnel and the associated costs during routine work and for unit turnarounds At times, assist with the review of NDE contractor certifications Communicate with a clear, concise, and accurate expression of facts, orally and written Give clear expectations to contract inspectors on inspection and technical issues as necessary Give clear expectations to other plant personnel on inspection and technical issues as necessary Report progress to and discusses problems with supervisor PROCESS SAFETY MANAGEMENT / SAFETY Actively participate in plant safety programs, processes, and promote safety leading by example Actively complete monthly safety audits Participate and provide valued input to HAZOP, PHA, MOC reviews, and complete PSSR's Participate and assist with inspection procedure audits and updates Assist with root cause failure analysis of equipment as necessary Assist with incident investigations as necessary Note: This description is intended to give you a general overview of the position. Additional responsibilities and opportunities may be identified based on current business needs. Qualifications To be considered for this role, candidates must have legal authorization to work permanently in the United States for any employer without requiring a visa transfer or sponsorship. To comply with the regulations at this work location, successful applicants must be eligible to obtain a TWIC card (Transportation Worker Identification Credential). Please review eligibility criteria at ************************************** Additional qualifications include: Must be 18 years old or older with a High School Diploma or equivalent required Minimum of 5 years refinery experience with at least 3-9 years inspection experience required Must maintain a valid driver's license with a safe driving record throughout employment API-510 Pressure Vessel Inspector Certification required API-570 Piping Inspector Certification preferred or good working knowledge of this code and working towards certification required API-653 Above Ground Storage Tank Inspector Certification preferred or good working knowledge of this code and working towards certification Knowledge and interpretation skills of the following Codes: ASME Section 8, ASME B31.3, ASME Section 9, ASME PCC-2, ASME Section 2 (parts C and D), and ASME Section 5 preferred. Will be required to learn Certified Welding Inspector (CWI) through American Welding Society required Non-Destructive Testing Level II Certifications preferred or a good understanding of the techniques in the following methods: Dye Penetrant, Ultrasonic Thickness required Certification as Certified Radiographic Interpreter (CRI) through the American Welding Society preferred. Will be required to learn Knowledge of refinery damage mechanisms preferred. Will be required to learn Proficiency in computer-based inspection data systems, reporting tools (e.g., Excel), and technical documentation software is required. Strong communication and collaboration skills with ability to clearly present technical information across departments Must be able to climb and work at elevations in excess of 150 feet using the appropriate safety equipment Must be able to work in confined spaces and at times in supplied breathing air Strong teamwork environment with all refinery departments is expected During Turnarounds and unscheduled maintenance activities may require more than 40 hours per week Proper Personal Protective Equipment (PPE) such as hearing and eye protection, face shield, goggles, rubber gear, gloves, SCBA, and fire-retardant outer wear are required Weekend duty assignments are periodically required After-hours callouts are periodically required Participation in Incident Command Structure may be required About Us At Par Pacific, we own and operate market-leading energy and infrastructure businesses in logistically-complex markets. We have built a team of oil and gas industry veterans and subject matter experts to lead our organization with an entrepreneurial spirit and a collaborative, problem solving approach. We bring our diverse strengths and motivation to complex markets where we seek out diamonds in the rough. As a nimble, growing organization, we actively pursue new opportunities with corporate financing know-how, respond to local market demands, and adapt to changing external environments. More Good Reasons to Work for Par Pacific Unique Culture There is nothing ordinary about Par Pacific -- a niche player in the energy space. And there's certainly nothing ordinary about Par Pacific employees. We are driven, hardworking, entrepreneurial-minded professionals who love to win. If that describes you, you'll fit right in. Location, Location, Location Because Par Pacific operates in some of the most beautiful places throughout the country, our employees get to make these places their home and enrich their lives. You will work in Newcastle, the county seat of Weston County, which offers the neighborly culture you would expect in a small town. We are proud of our great schools, low cost of living. The downtown historic district is listed with the National Registry of Historic Places, and it helps preserve the Western culture that residents love. Opportunistic Growth Strategy At Par Pacific, we look for operations with strong fundamentals and great employees who can move a business forward. Our management team has deep experience in the energy industry, as well as in leading mergers, acquisitions, and integrations of newly acquired companies. Focused on the Future We are an energy company that has recognized the imperative and embraced the opportunity to begin the transition from fossil fuels. We are developing products that help reduce greenhouse gas emissions. Excellent Compensation and Benefits In addition to a competitive salary, we offer a strong comprehensive benefits package that includes medical, dental and vision insurance, a robust allotment of paid time off, a 401(k) with company match, retirement savings plans, educational reimbursement, and more. Full-time employees (and their families) are offered medical (with prescription coverage), dental, vision, voluntary critical illness, accident, life/AD&D insurance, Flexible Spending Account and Employee Assistance Program. Employees can purchase company stock at discounted prices through the Employee Stock Purchase Program. Our Headquarters Par Pacific Holdings, Inc., based in Houston, Texas, owns, manages and maintains interests in energy and infrastructure businesses. We are a growing energy company focused on renewable and conventional fuels in the Western United States. Par Pacific also owns 46% of Laramie Energy, LLC, a natural gas production company with operations and assets concentrated in Western Colorado. Our common stock is publicly traded on the NYSE under the trading symbol "PARR". Our Refineries and Logistics Operations We own and operate refineries in Hawaii, Montana, Washington, and Wyoming, with total operating throughput capacity of over 219 Mbpd. Par Pacific owns and operates one of the largest energy networks in Hawaii with 94,000 bpd of operating refining capacity, a logistics system supplying the major islands of the state and 90 retail locations. In the Pacific Northwest and the Rockies, Par Pacific owns and operates 124,000 bpd of combined refining capacity and related multimodal logistics systems. Our Retail Operations We own and operate 90 retail locations in Hawaii under the Hele and 76 brands and 33 retail locations in Washington and Idaho under the nomnom brand. Par Pacific Is an Equal Opportunity Employer Par Pacific prohibits discrimination and harassment of any type and affords equal employment opportunities to employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, genetic information or any other status protected by applicable law. Note: Par Pacific will not accept calls or unsolicited resumes from third-party recruiters. All candidates are required to apply through this web posting.

Job Description About the Role: The Quality Controller plays a crucial role in ensuring that parts meet the established quality standards before they reach the market. This position involves conducting thorough inspections and tests on materials and finished goods to identify any defects or areas for improvement. The Quality Controller will collaborate closely with production teams to implement quality assurance processes and corrective actions. By maintaining high-quality standards, this role directly contributes to customer satisfaction and the overall reputation of the company. Ultimately, the Quality Controller is responsible for fostering a culture of quality and continuous improvement within the organization. Minimum Qualifications: High school diploma or equivalent. Proven experience in quality control or a related field. Attention to detail, ability to follow direction, and be consistent in processing parts. Preferred Qualifications: Previous experience in a quality control or manufacturing environment. Familiarity with quality management systems and tools. Responsibilities: Prepare recycled, dismantled vehicle parts for resale, to include washing, tagging, inspection. Report any defects or non-conformities for further investigation or resolution. Support the implementation of quality improvement initiatives and corrective actions. Collaborate with production staff to ensure adherence to quality protocols and procedures. Direct QC Helper in preparation process to ensure all processes are followed and quality parts are sold to customer. Skills: The required skills for this position include attention to detail, which is essential for accurately prepping parts and identifying defects. Strong communication skills are necessary to effectively report findings and collaborate with team members. Basic analytical skills will be utilized to assess quality data and contribute to problem-solving efforts. Preferred skills, such as familiarity with quality management systems, will enhance the QC Helper's ability to support quality initiatives. Overall, these skills are vital for maintaining high standards of quality and ensuring customer satisfaction.

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR ZGaps50Je6

General Responsibilities: Perform field and/or laboratory testing, observation, and inspection of construction materials (e.g. soils, aggregates, concrete, asphalt, and steel). Communicate with project manager, engineering technicians, client representative, contractor's representative and others as applicable regarding the construction site, project requirements, and testing, observation, and inspection requirements and results. Transport material samples with associated identifying documentation to the laboratory for further testing and analysis. Tabulate, prepare, and submit data and observation in the form of written and digital reports as work is performed for daily transmittal to the Terracon Project Manager. Maintain and clean equipment, vehicles and work areas. May assist with scheduling and dispatch of Technicians to project sites. Adhere to strict safety standards. Essential Roles and Responsibilities: * Performs testing, observation, and inspection as directed in accordance with training and the specified procedures. * Provides clear documentation of findings and results. * Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager. * Communicates information to Project Manager and other personnel as directed by the PM. * Assists higher level technicians on complex tasks. * Maintains assigned equipment and related calibration. * Drive a vehicle such as a Ford F-150 or equivalent. * Follows safety rules and practices and other safety requirements for all projects. Performs pre-task planning prior to executing work. Report any safety issues or concerns to management. * Be responsible for maintaining quality standards on all projects. Requirements: * High school diploma or equivalent. * Minimum 1-2 years of relevant experience or the equivalent in training and related experience. * Experience with laptop computer use and Microsoft Word and Excel * Valid driver's license with acceptable violation history. Preferred Certification: * Certifications in one or more of the following areas: * NICET Level II certification in Construction Materials Testing in one or more of the following categories: Asphalt, Concrete, Soils. * NICET Level II certification in Geotechnical in one or more of the following categories: Construction, Laboratory, Exploration, Generalist * ICC certification in one or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding. * American Welding Society (AWS) Certified Associate Welding Inspector (CAWI) * American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT). * Other national, regional, state, and local Materials related certifications requiring experience and written examination will also be considered if deemed appropriate by the Terracon Department Manager. Required Certification: * ACI certification in one or more of the following areas: * Concrete Field Testing Technician Grade I * Concrete Strength Testing Technician * Certified in radiation safety and Nuclear Density Gauge operation. * Successful completion of related internal safety certifications. About Terracon Terracon is a 100 percent employee-owned multidiscipline consulting firm comprised of more than 8,000 curious minds focused on solving engineering and technical challenges from more than 200 locations nationwide. Since 1965, Terracon has evolved into a successful multi-discipline firm specializing in environmental, facilities, geotechnical, and materials services. Terracon's growth is due to our talented employee-owners exceeding expectations in client service and growing their careers with new and exciting opportunities in the marketplace. Terracon's vision of "Together, we are best at people" is demonstrated through our excellent compensation and benefits package. Based on eligibility, role and job status, we offer many programs including medical, dental, vision, life insurance, 401(k) plan, paid time off and holidays, education reimbursement, and various bonus programs. EEO Statement Terracon is an EEO employer. We encourage qualified minority, female, veteran and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment, or any employee because of race, color, religion, national origin, age, sex, sexual orientation, gender identity, gender, disability, age, or military status.

Job Description Why Join Our Team? Joining Rinker means becoming a part of a team that's committed to making a positive impact. When you work with us, you're not just building structures; you're contributing to the growth and development of communities. As a Quality Control Technician, you will be responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment. Join our team and enjoy a comprehensive benefits package that includes competitive pay, a 401k match, paid vacation, holidays, employee discounts, and more. Why Choose a Career with Us? Growth and Learning: We provide an environment that encourages personal and professional growth, helping you build a long-lasting, successful career. Innovation: Be a part of a team that's shaping the future of construction and infrastructure. Impact: What we build today will shape the world for generations to come. Your work here will be your legacy, impacting communities and leaving a lasting mark on the world. Collaboration: We value collaboration and teamwork, knowing that the best solutions are born through shared knowledge and diverse perspectives. Join us and work with talented, like-minded professionals. About the Role: Responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment Read and understand shop fabrication drawings and specs and verify dimensions of product or material Perform internal audits and maintain quality control inspection records Act as liaison to outside inspectors Resolve quality issues due to production and fabrication errors Inspect finished good loads prior to plant departure Coach and train the team in quality requirements Qualifications: High School Diploma or GED. 2 years manufacturing experience. Prior QC experience preferred. Ability to read and interpret shop drawings and American Society for Testing and Materials (ASTM) specifications. Ability to interpret readings from Micrometers, Calipers, and other QC tools. Excellent communication and organization skills. We're always on the lookout for passionate individuals who are committed to Excellence and share our vision of a better future. If you're ready to take the next step in your career and contribute to some of the most exciting infrastructure projects, we invite you to explore our current job openings and start your journey with us. Ready to Apply? The process is simple. Click on the “apply” button to get started.

Why Join Our Team? Joining Rinker means becoming a part of a team that's committed to making a positive impact. When you work with us, you're not just building structures; you're contributing to the growth and development of communities. As a Quality Control Technician, you will be responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment. Join our team and enjoy a comprehensive benefits package that includes competitive pay, a 401k match, paid vacation, holidays, employee discounts, and more. Why Choose a Career with Us? * Growth and Learning: We provide an environment that encourages personal and professional growth, helping you build a long-lasting, successful career. * Innovation: Be a part of a team that's shaping the future of construction and infrastructure. * Impact: What we build today will shape the world for generations to come. Your work here will be your legacy, impacting communities and leaving a lasting mark on the world. * Collaboration: We value collaboration and teamwork, knowing that the best solutions are born through shared knowledge and diverse perspectives. Join us and work with talented, like-minded professionals. About the Role: * Responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment * Read and understand shop fabrication drawings and specs and verify dimensions of product or material * Perform internal audits and maintain quality control inspection records * Act as liaison to outside inspectors * Resolve quality issues due to production and fabrication errors * Inspect finished good loads prior to plant departure * Coach and train the team in quality requirements Qualifications: * High School Diploma or GED. * 2 years manufacturing experience. Prior QC experience preferred. * Ability to read and interpret shop drawings and American Society for Testing and Materials (ASTM) specifications. * Ability to interpret readings from Micrometers, Calipers, and other QC tools. * Excellent communication and organization skills. We're always on the lookout for passionate individuals who are committed to Excellence and share our vision of a better future. If you're ready to take the next step in your career and contribute to some of the most exciting infrastructure projects, we invite you to explore our current job openings and start your journey with us. Ready to Apply? * The process is simple. Click on the "apply" button to get started.

We are seeking a passionate, dedicated Quality Control Technician to ensure our products exceed industry standards and client expectations. With a focus on quality, sustainability, and innovation, we serve a diverse range of clients across commercial, residential, and infrastructure projects. As a Quality Control Technician, you will play a crucial role in maintaining the quality and integrity of our concrete products. You will be responsible for conducting tests, analyzing data, and developing solutions to improve product quality. This position requires a keen eye for detail, a strong understanding of concrete technology, and the ability to work collaboratively with intersecting departments at SRM such as operations, production, sales, and technical services. Key Responsibilities: Conduct routine and non-routine analyses of raw materials, in-process, and finished concrete products using industry-standard methods. Interpret test results, compare them to established specifications and control limits, and make recommendations on the appropriateness of data for release. Perform visual inspections of finished products to ensure compliance with quality standards and specifications. Collaborate with production teams to identify and troubleshoot production challenges that affect quality. Assist in the development and implementation of quality control training programs for production staff. Maintain accurate and organized records of tests, analyses, and other quality-related activities. Stay updated with the latest trends, technologies, and regulations in the concrete industry to recommend improvements to our quality control processes. Qualifications Able to meet schedule requirements. Shifts vary based on scheduled pours. Candidates must be able to accommodate day shifts, as well as overnight shifts. ACI certification preferred Associate or bachelor's degree in Civil Engineering, Materials Science, Concrete Management, Construction Management, or related field is preferred. 1-3 years of experience in quality control or quality assurance, preferably in the concrete or construction materials industry. Strong understanding of concrete technology and testing methods. Excellent analytical skills and attention to detail. Effective communication and interpersonal skills. Ability to work independently and in a team environment. Proficiency in Microsoft Office and experience with quality management software. Willingness to undergo SRM's pre-employment screenings. About us: SRM strives to be the largest, most profitable construction material company in the country, while maintaining a best-in-class culture. SRM's 5 Principles of Service: Safety, Quality, Kindness, Cleanliness, Go-Getter Why Join Us? Our commitment to our team includes: Growth: Opportunities for advancement in a rapidly growing company. Home Daily: Enjoy work-life balance with daily home time. Competitive Compensation: Hourly pay with eligibility for bonuses and annual raises. Exceptional Benefits: Comprehensive benefits package including low-cost medical, dental, vision, STD, LTD, and life insurance, paid holidays, PTO and vacation programs, 401k with $100 match/week, family days, and more! Overtime Opportunities: Daily overtime after 8 hours and weekly after 40 hours Candidates will be required to undergo a pre-employment drug screen, SRM's pre-employment physical, and consent to background checks, including Clearinghouse and MVR checks. We are an equal-opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

At DistributionNOW, we believe our associates are the best in the business. We value and reward hardworking, creative, and dedicated employees that desire to be part of a team committed to outstanding customer service. START YOUR CAREER NOW. The Quality Control Inspector is responsible for maintaining quality standards by approving incoming materials, in-process production, and finished products; recording quality results. JOB RESPONSIBILITIES: * Responsible for reading and interpreting various ASTM, ANSI, ASME, MSS and ISO Standards, Codes and specifications as they relate to technical requirements in the purchase orders. * Responsible for properly utilizing and interpreting precision measuring equipment, provide proper care and maintenance of same. * Assist in training appointed branch QA personnel to perform the duties of this position when unsupervised. May be required to travel to appropriate branch locations. * Accurately report completed work electronically, using MS Word, Excel, or database software and to utilize the internet to obtain Certified Test Reports whenever required. JOB REQUIREMENTS: * High school diploma or equivalent. * Ability to use calibrated precision dimensional tools including micrometers and calipers. Familiarity with products. * Ability to read and interpret related, in-depth and complicated written specifications, codes, standards and procedures. Ability to prioritize various work assignments to ensure most critical items are inspected first. * Maintain inventory and service levels to meet all customer requirements. Accurately pick and prepare orders for shipment. * Ability to operate forklift. Clean driving record * Communication skills, both oral and written * Microsoft Office skills (Excel and Word) * Team player, good statistical and numerical ability and detail-oriented BENEFITS: * Competitive Salary + bonus * 401(k)/ Retirement savings * Comprehensive Benefits (medical, dental, vision, life and disability coverage) * Career growth * Paid vacation/holidays

Job Title: QAQC Technician (Electrical) - Data Center Department: Quality Reports To: Quality Manager / Project Manager Loenbro Mission Critical has strategically shifted its focus to specializing in data center and mission-critical electrical projects. This decision capitalizes on the growing demand for reliable and innovative electrical solutions in the digital age. By specializing in this niche, Loenbro aims to excel in providing cutting edge electrical infrastructure for data centers and mission-critical facilities, positioning itself as a trusted partner in a rapidly expanding industry. This shift offers opportunities for specialization, long-term partnerships, technical innovation, and diversification, while also presenting challenges such as competition and compliance. To succeed, Loenbro must invest in expertise, adapt to changing regulations, and stay at the forefront of technological advancements, ultimately solidifying its reputation for quality and reliability in this critical sector. As an Electrical QA/QC Technician at Loenbro Mission Critical, you will play a critical role in ensuring the highest quality and safety standards are met throughout our electrical projects. You will be responsible for conducting inspections, tests, and quality control measures to maintain our reputation for excellence. Key Responsibilities: * Quality Assurance: Develop and maintain a robust quality assurance and quality control (QA/QC) program for electrical projects, including the review of project plans and specifications. * Inspection: Conduct thorough inspections of electrical installations, equipment, and materials to verify compliance with industry standards, codes, and project requirements. * Testing: Perform electrical testing, measurements, and functional checks to ensure the integrity, safety, and reliability of electrical systems. * Documentation: Maintain detailed records of inspections, test results, and any non-conformance issues. Prepare and submit comprehensive reports to project managers and clients. * Compliance: Ensure that all electrical work complies with local, state, and national electrical codes and regulations. * Problem-Solving: Collaborate with project teams to identify and resolve quality-related issues in a timely manner. * Training: Provide guidance and support to project personnel regarding quality and safety standards, fostering a culture of quality excellence. Qualifications: * 1-3 years of previous experience in quality assurance/quality control roles within the electrical industry is highly desirable. * Degree in Electrical Engineering, Quality Control, or a related field (Preferred). * Strong knowledge of electrical codes, industry standards, and regulations. * Exceptional attention to detail and strong analytical skills. * Effective communication and documentation skills. * Proficiency in the use of testing equipment and tools. * Ability to work independently and as part of a collaborative team. * Commitment to safety, quality, and continuous improvement. * OSHA10 or higher and other safety certifications are highly preferred. Work Environment: * This position may require travel to various project sites. * Ability to work in a fast-paced environment and adapt to changing project requirements. * Occasional evening and weekend work may be required to meet project deadlines. Potential Hazards: * Outside most of the time * Potential exposure to extreme cold and hot temperatures * Manufacturing and refining environment * Fit and move in confined spaces including tanks and vessels * Limited working surfaces * Exposure to noise above 85 decibels and intense odors * Exposure to areas with limited visibility * Climbing up and down stairs and ladders to both get in and out of trenches and up to elevated platforms (scaffolding at significant heights) * Lifting necessary equipment and materials 1-50 pounds, 50% of the time on a monthly basis for required tasks * Potential or Periodic amounts of time for the following: * If driving is required, valid driver license and proof of insurability is required. All drivers are subject to a DMV background records search. Essential Requirements: * Walking on uneven terrain, with an average of 2 miles per day * Standing * Sit, stoop, crawl, and kneel * Use of respirator if position requires * Driving if required to travel Benefits: * Health Benefits: All employees are eligible for medical, dental, vision and life insurance coverage * 401(k) Retirement: The Company provides a 100% match of the first 4% of employee's contribution each year, to the plan. Eligibility for the plan begins the first day of the month following 90 days of employment. We are "Leading the Change" in the Energy Services Industry. Our growth and successes have not changed who we are. We live our core values every day. WE TAKE ACTION. WE DO WHAT WE SAY. WE LEAD BY EXAMPLE. WE DO THE RIGHT THING. WE PRACTICE STEWARDSHIP. Loenbro is an Equal Opportunity Employer.

Full-time Description This position will play a key role in programming and running CMM's inspections for parts. May be needed to support other PMP Locations outside of your current home base. Support Lead CMM Position in Cody, Wyoming, when required assist PMP CMM Operators / Programmers throughout the Organization. Inspects general machining operations during production sequence to ensure conformance of all parts with the customer specifications and within AS91002C certification standards. Requirements ESSENTIAL FUNCTIONS · Develop new CMM inspection programs and modify existing programs as needed. · Review GD&T blueprints, engineering specifications, and job orders to ensure production specifications are met. · Utilize precision measuring instruments and aids to measure dimensions and layout of machined parts, castings, jigs, fixtures, and templates. · Verify machine set-up and ensure the conformance of first-run production work to customer specifications. · Perform spot checks and random audits of machined parts during production sequences. · Initiate nonconformance reporting when necessary and certify product compliance when required. · Identify opportunities for process improvements to enhance quality control. · Conduct regular quality assessments on incoming materials and outgoing products. · Collaborate with the team and perform additional duties as assigned. Education/Skills/Abilities · Minimum of three (3) years of experience in an aerospace manufacturing environment, with a focus on quality control is preferred. Alternatively, a combination of education and related aerospace experience resulting in a comprehensive understanding of manufacturing practices, procedures, and equipment, with a minimum of three (3) years of inspection and CMM programming experience. · Proficiency in operating CMM, visual CMM, and various other measuring equipment. · Preferred certification in GD&T. If not certified, the employee must complete certification within nine months of hire. · Strong knowledge of quality systems, technical understanding of parts, and advanced blueprint reading skills. · Ability to create standard inspection reports and first article inspection reports. · Excellent problem-solving and analytical skills with independent thinking ability. · Effective communication and people skills, including active listening. · Professional demeanor with an elevated level of integrity and demonstrated stability. · Purposeful mindset and ability to work with diligence and accuracy. · Strong organizational and time management skills, with the ability to prioritize tasks and work efficiently in a demanding environment. · Proficiency in using computers and familiarity with Microsoft Office and other relevant software. · Willingness to embrace new techniques and continuously upgrade skills in the quality and manufacturing fields. · Ability to maintain a positive company image and work well in a team environment, fostering healthy working relationships. · High school graduate with a focus on math and trigonometry. · All applicants must be U.S. persons as defined by the International Traffic in Arms Regulations (ITAR). Proof of eligibility to work in the United States is required. · Compliance with the federal Form I-9, Employment Eligibility Verification, is mandatory. · Precision Machined Products uses E-Verify to verify the work authorization of all new hires

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

At DistributionNOW, we believe our associates are the best in the business. We value and reward hardworking, creative, and dedicated employees that desire to be part of a team committed to outstanding customer service. START YOUR CAREER NOW. The Quality Control Inspector is responsible for maintaining quality standards by approving incoming materials, in-process production, and finished products; recording quality results. JOB RESPONSIBILITIES: • Responsible for reading and interpreting various ASTM, ANSI, ASME, MSS and ISO Standards, Codes and specifications as they relate to technical requirements in the purchase orders. • Responsible for properly utilizing and interpreting precision measuring equipment, provide proper care and maintenance of same. • Assist in training appointed branch QA personnel to perform the duties of this position when unsupervised. May be required to travel to appropriate branch locations. • Accurately report completed work electronically, using MS Word, Excel, or database software and to utilize the internet to obtain Certified Test Reports whenever required. JOB REQUIREMENTS: • High school diploma or equivalent. • Ability to use calibrated precision dimensional tools including micrometers and calipers. Familiarity with products. • Ability to read and interpret related, in-depth and complicated written specifications, codes, standards and procedures. Ability to prioritize various work assignments to ensure most critical items are inspected first. • Maintain inventory and service levels to meet all customer requirements. Accurately pick and prepare orders for shipment. • Ability to operate forklift. Clean driving record • Communication skills, both oral and written • Microsoft Office skills (Excel and Word) • Team player, good statistical and numerical ability and detail-oriented BENEFITS: • Competitive Salary + bonus • 401(k)/ Retirement savings • Comprehensive Benefits (medical, dental, vision, life and disability coverage) • Career growth • Paid vacation/holidays

Job Title: QAQC Technician (Electrical) - Data Center Department: Quality Reports To: Quality Manager / Project Manager Loenbro Mission Critical has strategically shifted its focus to specializing in data center and mission-critical electrical projects. This decision capitalizes on the growing demand for reliable and innovative electrical solutions in the digital age. By specializing in this niche, Loenbro aims to excel in providing cutting edge electrical infrastructure for data centers and mission-critical facilities, positioning itself as a trusted partner in a rapidly expanding industry. This shift offers opportunities for specialization, long-term partnerships, technical innovation, and diversification, while also presenting challenges such as competition and compliance. To succeed, Loenbro must invest in expertise, adapt to changing regulations, and stay at the forefront of technological advancements, ultimately solidifying its reputation for quality and reliability in this critical sector. As an Electrical QA/QC Technician at Loenbro Mission Critical, you will play a critical role in ensuring the highest quality and safety standards are met throughout our electrical projects. You will be responsible for conducting inspections, tests, and quality control measures to maintain our reputation for excellence. Key Responsibilities: Quality Assurance: Develop and maintain a robust quality assurance and quality control (QA/QC) program for electrical projects, including the review of project plans and specifications. Inspection: Conduct thorough inspections of electrical installations, equipment, and materials to verify compliance with industry standards, codes, and project requirements. Testing: Perform electrical testing, measurements, and functional checks to ensure the integrity, safety, and reliability of electrical systems. Documentation: Maintain detailed records of inspections, test results, and any non-conformance issues. Prepare and submit comprehensive reports to project managers and clients. Compliance: Ensure that all electrical work complies with local, state, and national electrical codes and regulations. Problem-Solving: Collaborate with project teams to identify and resolve quality-related issues in a timely manner. Training: Provide guidance and support to project personnel regarding quality and safety standards, fostering a culture of quality excellence. Qualifications: 1-3 years of previous experience in quality assurance/quality control roles within the electrical industry is highly desirable. Degree in Electrical Engineering, Quality Control, or a related field (Preferred). Strong knowledge of electrical codes, industry standards, and regulations. Exceptional attention to detail and strong analytical skills. Effective communication and documentation skills. Proficiency in the use of testing equipment and tools. Ability to work independently and as part of a collaborative team. Commitment to safety, quality, and continuous improvement. OSHA10 or higher and other safety certifications are highly preferred. Work Environment: This position may require travel to various project sites. Ability to work in a fast-paced environment and adapt to changing project requirements. Occasional evening and weekend work may be required to meet project deadlines. Potential Hazards: Outside most of the time Potential exposure to extreme cold and hot temperatures Manufacturing and refining environment Fit and move in confined spaces including tanks and vessels Limited working surfaces Exposure to noise above 85 decibels and intense odors Exposure to areas with limited visibility Climbing up and down stairs and ladders to both get in and out of trenches and up to elevated platforms (scaffolding at significant heights) Lifting necessary equipment and materials 1-50 pounds, 50% of the time on a monthly basis for required tasks Potential or Periodic amounts of time for the following: If driving is required, valid driver license and proof of insurability is required. All drivers are subject to a DMV background records search. Essential Requirements: Walking on uneven terrain, with an average of 2 miles per day Standing Sit, stoop, crawl, and kneel Use of respirator if position requires Driving if required to travel Benefits: Health Benefits: All employees are eligible for medical, dental, vision and life insurance coverage 401(k) Retirement: The Company provides a 100% match of the first 4% of employee's contribution each year, to the plan. Eligibility for the plan begins the first day of the month following 90 days of employment. We are “Leading the Change” in the Energy Services Industry. Our growth and successes have not changed who we are. We live our core values every day. WE TAKE ACTION. WE DO WHAT WE SAY. WE LEAD BY EXAMPLE. WE DO THE RIGHT THING. WE PRACTICE STEWARDSHIP. Loenbro is an Equal Opportunity Employer.

Apply now Mechanical Inspector The Opportunity * Mechanical Inspector at a growth-oriented energy company. * Reporting to the Chief Inspector, this position is responsible for supporting and executing a comprehensive mechanical integrity program focused on the safe, reliable, and compliant operation of fixed equipment across the refinery. * This is a highly technical role requiring a strong working knowledge of API and ASME codes, Risk-Based Inspection (RBI) methodology, and damage mechanism identification. The Mechanical Inspector will lead and perform inspections, review and interpret NDE results, and develop detailed repair recommendations for pressure vessels, piping, relief devices, tanks, and other critical assets. This role plays a key part in supporting turnaround planning, equipment reliability improvements, and long-term asset strategies. * The ideal candidate brings sound judgment, a proactive approach, and the ability to work cross-functionally with engineering, operations, and maintenance. This position is suited for an inspector capable of providing technical leadership and driving continuous improvement within the inspection program. Key activities include: ESSENTIAL FUNCTIONS AND RESPONSIBILITIES * Maintain accurate inspection records for all applicable refinery equipment in accordance with inspection procedures and company standards, using IDMS platforms (e.g., PCMS or equivalent) * Understand and respond to basic IDMS reports including inactive CML's, equipment service, deferrals / overrides, and due dates * Inspect and recommend plans for repair and replacement of refinery equipment with assistance from senior inspector(s) and engineering personnel * Develop knowledge and understanding of facility operations and how the specific units impact the economics of the business * Perform assigned work efficiently and effectively to maximize personal productivity * Participate in risk-based inspection studies, evaluations, and recommendations * Calculate the remaining life of selected equipment in accordance with ASME and API Codes * Assist in the approval of plant NDE procedures * Review NDE results for clarity, content and ASME/API Code compliance * Assist in monitoring department costs OTHER DUTIES AND RESPONSIBILITIES * Inspect equipment and evaluate data results to ensure equipment is safe for continued operation * Document results of all inspections, tests, alterations, and equipment repairs in equipment history files or IDMS * Assist in making NDE and inspection plans for equipment, based on damage mechanisms such as wet H2S, caustic cracking, amine corrosion, etc * Make or contribute to repair decisions and issues detailed repair instructions / procedures and solicits assistance when required * Review and approve welding procedures submitted by contractors * Review and approve repair procedures submitted by contractors and plant maintenance personnel * Complete, with assistance as needed, vendor surveillance and audits of equipment being constructed off site. This includes, but is not limited to, material verification, dimensional checks, inspection and quality assurance reviews * Develop and write welding procedures for plant maintenance personnel * On a limited basis, assist in the development of inspection work lists for plant turnarounds along with detailed justifications for the work to be completed * Communicate well with work associates. Demonstrate ability to respect varying perspectives and work in a collaborative manner * Be able to present basic technical and process calculation information in a concise and understandable manner * Participate in the completion of all inspection HAZOP action items assigned through KMS or other data base * Participate in the completion of all Incident Investigations or inspection follow-up items, as assigned through KMS or other data base * Takes initiative to maintain and increase technical knowledge * Liaise with Operations, Maintenance, and Engineering to develop inspection scopes and communicate asset health. * Represent Inspection in multi-disciplinary Root Cause Analysis (RCA), Process Hazard Analyses (PHA), and other asset integrity forums * Prepare technically accurate and regulatory-compliant inspection reports and repair recommendations in alignment industry regulations and company recordkeeping standards. SUPERVISORY RESPONSIBILITIES * At times, assist in supervising inspection activities for contract inspectors and specialized / advanced NDE personnel and the associated costs during routine work and for unit turnarounds * At times, assist with the review of NDE contractor certifications * Communicate with a clear, concise, and accurate expression of facts, orally and written * Give clear expectations to contract inspectors on inspection and technical issues as necessary * Give clear expectations to other plant personnel on inspection and technical issues as necessary * Report progress to and discusses problems with supervisor PROCESS SAFETY MANAGEMENT / SAFETY * Actively participate in plant safety programs, processes, and promote safety leading by example * Actively complete monthly safety audits * Participate and provide valued input to HAZOP, PHA, MOC reviews, and complete PSSR's * Participate and assist with inspection procedure audits and updates * Assist with root cause failure analysis of equipment as necessary * Assist with incident investigations as necessary Note: This description is intended to give you a general overview of the position. Additional responsibilities and opportunities may be identified based on current business needs. Qualifications To be considered for this role, candidates must have legal authorization to work permanently in the United States for any employer without requiring a visa transfer or sponsorship. To comply with the regulations at this work location, successful applicants must be eligible to obtain a TWIC card (Transportation Worker Identification Credential). Please review eligibility criteria at ************************************** Additional qualifications include: * Must be 18 years old or older with a High School Diploma or equivalent required * Minimum of 5 years refinery experience with at least 3-9 years inspection experience required * Must maintain a valid driver's license with a safe driving record throughout employment * API-510 Pressure Vessel Inspector Certification required * API-570 Piping Inspector Certification preferred or good working knowledge of this code and working towards certification required * API-653 Above Ground Storage Tank Inspector Certification preferred or good working knowledge of this code and working towards certification * Knowledge and interpretation skills of the following Codes: ASME Section 8, ASME B31.3, ASME Section 9, ASME PCC-2, ASME Section 2 (parts C and D), and ASME Section 5 preferred. Will be required to learn * Certified Welding Inspector (CWI) through American Welding Society required * Non-Destructive Testing Level II Certifications preferred or a good understanding of the techniques in the following methods: Dye Penetrant, Ultrasonic Thickness required * Certification as Certified Radiographic Interpreter (CRI) through the American Welding Society preferred. Will be required to learn * Knowledge of refinery damage mechanisms preferred. Will be required to learn * Proficiency in computer-based inspection data systems, reporting tools (e.g., Excel), and technical documentation software is required. Strong communication and collaboration skills with ability to clearly present technical information across departments * Must be able to climb and work at elevations in excess of 150 feet using the appropriate safety equipment * Must be able to work in confined spaces and at times in supplied breathing air * Strong teamwork environment with all refinery departments is expected * During Turnarounds and unscheduled maintenance activities may require more than 40 hours per week * Proper Personal Protective Equipment (PPE) such as hearing and eye protection, face shield, goggles, rubber gear, gloves, SCBA, and fire-retardant outer wear are required * Weekend duty assignments are periodically required * After-hours callouts are periodically required * Participation in Incident Command Structure may be required About Us At Par Pacific, we own and operate market-leading energy and infrastructure businesses in logistically-complex markets. We have built a team of oil and gas industry veterans and subject matter experts to lead our organization with an entrepreneurial spirit and a collaborative, problem solving approach. We bring our diverse strengths and motivation to complex markets where we seek out diamonds in the rough. As a nimble, growing organization, we actively pursue new opportunities with corporate financing know-how, respond to local market demands, and adapt to changing external environments. More Good Reasons to Work for Par Pacific Unique Culture There is nothing ordinary about Par Pacific -- a niche player in the energy space. And there's certainly nothing ordinary about Par Pacific employees. We are driven, hardworking, entrepreneurial-minded professionals who love to win. If that describes you, you'll fit right in. Location, Location, Location Because Par Pacific operates in some of the most beautiful places throughout the country, our employees get to make these places their home and enrich their lives. You will work in Newcastle, the county seat of Weston County, which offers the neighborly culture you would expect in a small town. We are proud of our great schools, low cost of living. The downtown historic district is listed with the National Registry of Historic Places, and it helps preserve the Western culture that residents love. Opportunistic Growth Strategy At Par Pacific, we look for operations with strong fundamentals and great employees who can move a business forward. Our management team has deep experience in the energy industry, as well as in leading mergers, acquisitions, and integrations of newly acquired companies. Focused on the Future We are an energy company that has recognized the imperative and embraced the opportunity to begin the transition from fossil fuels. We are developing products that help reduce greenhouse gas emissions. Excellent Compensation and Benefits In addition to a competitive salary, we offer a strong comprehensive benefits package that includes medical, dental and vision insurance, a robust allotment of paid time off, a 401(k) with company match, retirement savings plans, educational reimbursement, and more. Full-time employees (and their families) are offered medical (with prescription coverage), dental, vision, voluntary critical illness, accident, life/AD&D insurance, Flexible Spending Account and Employee Assistance Program. Employees can purchase company stock at discounted prices through the Employee Stock Purchase Program. Our Headquarters Par Pacific Holdings, Inc., based in Houston, Texas, owns, manages and maintains interests in energy and infrastructure businesses. We are a growing energy company focused on renewable and conventional fuels in the Western United States. Par Pacific also owns 46% of Laramie Energy, LLC, a natural gas production company with operations and assets concentrated in Western Colorado. Our common stock is publicly traded on the NYSE under the trading symbol "PARR". Our Refineries and Logistics Operations We own and operate refineries in Hawaii, Montana, Washington, and Wyoming, with total operating throughput capacity of over 219 Mbpd. Par Pacific owns and operates one of the largest energy networks in Hawaii with 94,000 bpd of operating refining capacity, a logistics system supplying the major islands of the state and 90 retail locations. In the Pacific Northwest and the Rockies, Par Pacific owns and operates 124,000 bpd of combined refining capacity and related multimodal logistics systems. Our Retail Operations We own and operate 90 retail locations in Hawaii under the Hele and 76 brands and 33 retail locations in Washington and Idaho under the nomnom brand. Par Pacific Is an Equal Opportunity Employer Par Pacific prohibits discrimination and harassment of any type and affords equal employment opportunities to employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, genetic information or any other status protected by applicable law. Note: Par Pacific will not accept calls or unsolicited resumes from third-party recruiters. All candidates are required to apply through this web posting. Apply now

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR 7ABYTtIXup

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR nOEdtGQ1zk

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR 1WNegMp1JO

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only