Quality manager jobs in Ohio

Description JOB DESCRIPTION/SUMMARY The CQC Manager will be assigned to Department of Defense (DoD) construction project(s) located in various regions. This individual will be responsible for all aspects of quality control (QC) and must be onsite during all phases of the construction work. While at the jobsite, the CQC Manager works with the customer and other contractor staff to ensure QC objectives are met in accordance with the contract requirements and high standards of service delivery are maintained. DUTIES AND RESPONSIBILITIES · Prepare and update the QC Plan.· Attend coordination meetings with the Client, subcontractors, and vendors.· Implement the “Three Phases of Control” for all definable features of work.· Perform inspections to ensure work is completed in compliance with contract requirements.· Stop work that does not comply with the contract plans and specifications and direct the removal and replacement of any defective work.· Prepare and submit daily quality control reports.· Conduct weekly QC meetings at the jobsite. • Oversee the review and approval of design and construction submittals.· Ensure As-Built drawings are updated daily.· Coordinate onsite and offsite testing. Maintain a testing log.· Review invoices prior to approval to ensure all relevant work has been completed in accordance with the contract requirements.· Perform punch-list and pre-final inspections.· Perform other duties as requested by supervisors and senior level managers in support of successful performance on all projects.MINIMUM QUALIFICATIONS, SKILLS, AND EDUCATIONAL REQUIREMENTS A Bachelor's of Science degree from an accredited school in engineering or sciences with a minimum of seven (7) years' experience (within the last ten (10) years), as a Superintendent, Project Manager, or Project Engineer and at least five (5) years field experience as a CQC Manager with repairs to DoD petroleum, oil, and lubricants (POL) facilities, tank rehabilitation, tank cleaning and repairs and emergency inspection Familiar with requirements of USACE EM-385-1-1, and experience in the areas of hazard identification, safety compliance, and sustainability Knowledge and experience with POL industry standards including API Std 650, API Std 653, API RP 2016, and API Std 2015 and procedures an applicable DoD criterion Completion of course entitled Construction Quality Management for Contractors must be completed prior to fieldwork INTER-PERSONAL RELATIONSHIPS Must work effectively with employees, subcontractors, and clients at all levels. WORKING CONDITIONS The position requires working at the construction job site for extended periods of time. The position may require working during weekends and extended hours in order to meet deadlines. We are committed to a merit-based hiring process that values individual skills, qualifications, and performance. Our hiring practices comply with all applicable federal, state, and executive orders, including the recent Executive Order on Equal Opportunity Hiring.

Since 1985, our core business has been enteral device product development, design, manufacturing, and engineering in a state-of-the-art facility near Cleveland, Ohio. AMT's steady growth consistently creates job opportunities in Northeast Ohio. We are always searching for new talent and would love for you to join our team! We strive to keep the small company feeling while still reaching users all over the globe. Position Summary: This person will be involved with coordinating and managing the Quality Assurance activities in all areas of the production/manufacturing processes. This will consist of ensuring quality standards are met in the manufacturing of products. This person must be able to effectively communicate vital information to various personnel throughout the organization. Duties and Responsibilities: This list is not comprehensive but meant to represent the most common or important duties of the position. Other duties are required and/or assigned. * Assist in troubleshooting raw material issues. Determine the best course of action to resolve these issues and create and distribute reports to the appropriate personnel * Interpret and communicate company policies to governmental and third party auditors and enforce safety regulations * Create and/or modify regulatory procedures to remain in compliance with FDA, ISO, European, Canadian, and other standards. * Process, execute, organize and archive various internal documentation related to Engineering and/or Quality Systems. * Prepare and submit of regulatory filings, including FDA 510(k) premarket notifications and product listings. * Investigate complaints. * Review and approve complaint reports. * Analyze incoming complaints for reportability. * Notify proper authorities as required. * Track and trend complaints. * Create and present complaint report two times each year. * Review ECOs to ensure they are compliant and determine if regulatory bodies need to be notified of changes. * Review QMS changes to ensure they do not disrupt the safety or performance of the medical device under control of our QMS and that it does not disrupt the safety and effectiveness of the QMS or compliance with regulatory requirements. * Review and approve Engineering Test Protocols and Reports * Manage complaints, testing, calibration and training. * Train employees on changes to QMS. * Facilitate external audits. * Review employees providing input on their strengths and areas for improvement. Requirements Minimum Qualifications: * Four Year Engineering degree * 1-5 years related experience in a regulated environment, preferably medical device * Proficiency with MS Office * Familiarity with use of mechanical and electrical test equipment * Knowledge of commonly used concepts, practices, and procedures related to medical device manufacturing * Ability to analyze and aggregate data using statistics * Experience preferred with ISO 13485, ISO 14971 and FDA QSR for Medical Devices Language Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, vendors, non-engineers and the general public. Mathematical Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Certificates, Licenses, Registrations: Maintains a valid Driver's License. Essential Job Functions: Critical features of this job are described below. They may be subject to change at any time due to reasonable accommodation or other reasons. * Mental: Must be able to effectively communicate with others; complete and understand complex analysis of numbers; read, analyze and interpret written materials; develop team to meet and exceed company standards; ensure compliance with company policies; respond appropriately to feedback to make improvements; maintain positive working relationships; troubleshoot and solve problems. * Physical: Must be able to hear and verbally communicate for hours at a time, use computer equipment, potentially operate a Lathe, Mill and/or electrical/general hand tools. Moderate noise level and limited exposure to physical risk. Knowledge, Skills, and Abilities Required: Knowledge of modern business communication, office procedures and methods. Skill to use a personal computer and various software packages such as Microsoft Office Suite. Ability to establish priorities, work independently with minimal supervision, and facilitate teamwork. Equipment Used: Telephones, computer, other office equipment as needed, electrical and general hand tools Special/ Additional Requirements: Persons in this position may be required to pass a drug, alcohol, credit, and/or criminal background check. AMT is an Equal Opportunity/Affirmative Action Employer. Benefits: * Insurance: AMT offers major medical, dental, and vision insurance at the first of the month following 30 days of service. * Other Benefits: AMT offers several other voluntary benefits including hospital indemnity, critical illness, term life insurance & long term disability (company paid), among others. * 401k: AMT matches 100% of your contribution, up to 3% of your salary. * Paid Time Off (PTO): In addition to nine paid holidays, AMT provides employees with paid time off (determined by length of service), starting on day one Other Exciting Perks! * Family-oriented, Positive Working Environment * Discretionary Yearly Raises * On-site Vending & Gym * Annual Employee Appreciation Picnic * Tuition Reimbursement * Employee Referral Bonus Program * Employee Assistance Program

Job Description Prestige Staffing Services is seeking an experienced Quality Manager for a fantastic opportunity in the Findlay, Ohio area. Primary Responsibilities Plan and direct all quality related functions in the plant including providing leadership and direction to Quality Engineers and associates within area of responsibility Responsible for overall development and administration of Quality resources within the plant Allocate manpower resources to project teams and programs Establish and review process controls, emphasize customer satisfaction, continuous improvement, and waste reduction Direct activities and resources to obtain third party registration Determine Quality department standards, practices, and procedures. Establish and maintain product Quality standards. Establish and track quality department goals and objectives. Track external and internal customer quality issues including supplier quality issues and performance Work with Engineering to develop project launch strategy, capital needs, program timing Develop short-term and long-term strategy to support customer requirements as required. Other duties as assigned Requirements BS degree required 10+ years of Quality Management experience

About the Role: As Kalmbach Feeds continues to grow, we are looking for passionate, hard-working team members that live our values and help us develop new ideas, serve customers, improve our processes, build teams, and realize our growth. We are seeking a skilled Corporate Quality and Compliance manager to lead our quality assurance and regulatory compliance teams. You will provide support to meet agency requirements, including the EPA, FDA, ODA, and OSHA, and oversee quality assurance for each plant. Primary Responsibilities: Safety and Regulatory Compliance and reporting: Support regulatory compliance activities and champion a culture of employee safety. Train, audit, and report on compliance with EPA, FDA, ODA, OSHA, and other agencies. Maintain records and complete all required OSHA reporting. Quality Assurance: Develop, implement, and maintain quality assurance activities to support operations. Communicate and train the organization on quality philosophy. Perform audits, analyze data, and design training programs. Continuous Improvement: Identify opportunities for improvement, develop innovative solutions, and support operations managers with implementation. Leadership & Team Management: Directly supervise a team of compliance and quality technicians supporting throughout the corporation. Collaboration: Partner with operations management teams to provide focused feedback and training. The Right Candidate: Bachelor's degree in a Business Management, Quality, or Engineering, or a comparable technical field with at least five years of relevant experience. Extensive leadership experience in quality or operations management, with a strong focus on training, continuous improvement, and accountability. Knowledge of Federal and State OSHA regulations and compliance and reporting requirements. Experience in a manufacturing or warehouse environment is preferred. Excellent analytical, communication, and problem-solving skills. Proficiency in Warehouse Management Systems, ERP, MES, Human Resource systems, and Microsoft Office Suite. About the Company: Kalmbach Feeds offers the highest quality nutritional products for livestock, poultry, and companion animals. The company was founded in 1963 by Milton and Ruth Kalmbach with a vision to develop the finest products, providing customers with the best possible nutritional value. The Kalmbach family's traditional core values have served as the compass for consistent success for over six decades, and the company has become the regional leader within the animal nutrition industry. Kalmbach Feeds enjoys an excellent reputation for quality and integrity within the animal nutrition industry and is comprised of smart self-starters who are driven to serve customers. Our experienced, talented team utilizes cutting-edge technology and proprietary processes to deliver safe, innovative products. Our stringent ingredient testing, computer automated systems, patented technologies, dedicated manufacturing facilities, and in-house nutrition specialists guarantee it. Additional information regarding our exciting company can be found at ***************************************** and *********************** Kalmbach Feeds Offers: Medical, Dental, and Vision Benefits with eligibility on date of hire 401(K) (traditional and Roth options) with generous company match 3 Weeks Paid Time Off in first year Company Paid Short Term and Long Term Disability Company Paid Life Insurance Competitive Compensation On Staff Life Coach Medical and Dependent Care Reimbursement Plans Access to Beach Front Company Condo in Fort Myers, FL Kalmbach Feeds is an Equal Opportunity Employer. Each applicant for employment is considered solely based on job qualifications, without regard to race, color, religion, sex, age, disability, national origin, veteran status, or any other classification protected by law. The information contained within your resume and application, including employment history, educational history, and references, are subject to verification. Pre-employment drug screen (hair and urine), physical, and criminal background check required. Only qualified candidates will be contacted.

The Dayton Cores and Castings (DCC) facility is a GE Aerospace manufacturing shop that makes HPT Airfoil Cores and Castings. We are a low-rate production shop that develops the leading edge of airfoil technology to deliver value through new product introduction and manufacturing industrialization. We are proud to have been awarded OSHAS's highest safety rating. As the Metallurgical Laboratory Manager, you will be responsible for leading day-to-day operations of the metallurgical and materials testing laboratory to ensure compliance with GE Aerospace quality standards, customer requirements, and regulatory/industry specifications. In this role, you will oversee laboratory personnel, ensure accuracy and integrity of all metallurgical evaluations, and support production, Quality, Engineering, and Turbine Airfoils Value stream teams with a timely and reliable technical data. This role is in Beaver Creek Ohio, just outside Dayton. **Job Description** **Roles and Responsibilities:** + Lead and manage metallurgical lab technicians, providing guidance, workload management, training and performance feedback + Plan and prioritize laboratory testing, including microstructure evaluations, SEM analysis, failure analysis reports, and other material characterization evaluation from Quality/Engineering/Casting Technology teams + Ensure compliance with GE Aerospace specification requirements and procedures, industry standards (e.g. AS9100/ISO, AS13100, NADCAP) + Review and approve laboratory reports, ensuring accuracy, completeness, analysis and traceability of testing evaluations + Manage laboratory equipment, ensuring calibration, maintenance, and readiness of metallographic equipment, microscopes and other analytical instruments + Coordinate metallurgical investigations to support Quality, Engineering, and Manufacturing + Maintain traceability of samples, current documentation, test records, and electronic data systems in accordance Quality Management Systems. + Drive continuous improvement including 5S, waste reduction, and process optimization within the laboratory + Support audits (internal & external, NADCAP, AS9100, AS13100) to ensure corrective actions are implemented promptly + Ensure safety compliance, including proper use of PPE, chemical handling procedures, and maintaining a safe laboratory environment + Collaborate with Quality Engineers, Engineering, operations and leadership, providing materials and process insights, failure analysis reports, and technical recommendations **Required Qualifications** + Bachelor's Degree from an accredited college or university (or a high school diploma / GED with a minimum of 4 years of experience in Metallurgical and/or Materials testing laboratories. Aerospace preferred) + At least an additional 3 years of experience in Metallurgical and/or Materials testing laboratories **Desired Characteristics** + Prior leadership or supervisory experience + At least 5 years' experience in Metallurgical or Materials testing laboratories (Aerospace preferred) + Bachelor's degree in Metallurgical Engineering, Engineering, Materials Science, or related field + Experience in Metallurgical, materials properties, heat treatment, alloys, and ceramic cores + Knowledge in APQP (Advanced Product Quality Planning) and PPAP + Knowledge of AS9100, AS13100 and AS9102. + Ability to analyze problems, identify root causes, and provide efficient and effective corrective actions + Humble: respectful, receptive, agile, eager to learn + Transparent: shares critical information, speaks with candor, contributes constructively + Focused: quick learner, strategically prioritizes work, committed + Collaborative and strong communicator + Problem solver: analytical-minded, challenges existing processes, critical thinker GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

PAY: $80K - $90K VISA SPONSORSHIP: NO REMOTE: NO Do you enjoy working in a fast-paced environment and being challenged? If so, Stanley Electric is offering a great opportunity for an experienced Quality Control Manager. ABOUT US: Stanley Electric US is a full-service, tier one supplier to Honda, specializing in the design and production of lighting equipment, accessories, and electronic components. Our London, Ohio facility houses lighting and mold design, construction, production engineering, and dedicated associates in our Quality, Assembly, Sales, and Customer Service departments. At Stanley, we blaze our own trail to a brilliant future by daring to outshine light. HOW YOU WILL OUTSHINE: Demonstrating solid organization skills Being attentive to every detail Exercising critical thinking Solving problems Working well independently and with a team WHAT YOU WILL BE DOING: Providing leadership and ensuring the full functionality of the QC department by: Ensuring clarity of expectations and achievement of departmental targets by providing leadership through performance planning, on-going feedback, supporting Associates in the performance of their duties, and recognition activities. Establishing, communicating, and measuring performance against objectives. Ensuring policies and procedures are developed, implemented, disseminated and followed. Identifying opportunities for continuous improvement and implementing new methods, elements or processes to the quality assurance system, quality management system and compliance achievement to outside certifications (ISO, CCC, etc.) Strengthening quality the assurance system by monitoring and tracking quality and product performance and analyzing market, customer and in-house results. Evaluating and addressing budgetary concerns. Overseeing customer complaints, ensuring timely problem solving and cost-effectiveness. Improving operations by reviewing and reporting reasons for suppliers' decline or improvement in ratings. Regularly communicating with top management to ensure low customer complaints and ensure the ability of suppliers to create a quality product for a reasonable price. HOW YOU WILL BE REWARDED: Medical, Dental, Vision and Life Insurance 401K Retirement Savings with Company Match Tuition Reimbursement and more! HOW YOU WILL QUALIFY: Bachelor's degree in Engineering or related field or equivalent experience 8 years of quality control experience in a manufacturing environment 2 years of supervisory experience Competent user of Microsoft Office Products. Demonstrated knowledge of quality control techniques and processes Knowledge of ASQC Demonstrated analytical skills Demonstrated oral and written communication skills WORKING CONDITIONS: Ability to lift 40lbs General Office Environment five (5) hours per day Manufacturing Environment three (3) hour per day Occasional overnight travel may be required to perform essential functions at remote locations or receive training. Required to work overtime (unplanned and unscheduled) to meet customer deadlines and requirements. HAZARDS: While performing the job the position is frequently exposed to: Moving or mechanical parts. Chemicals, noise and heat. Moderate noise levels with specific areas required to wear hearing protection. All Stanley U.S. Associates share in the effort to achieve customer satisfaction and continuously improve overall performance. Success is found in the delivery of high-quality products on a timely basis at a competitive price. Every team member, in the conduct of his or her daily activities and interactions, has abundant opportunity to make a positive contribution. While no listing of duties and responsibilities can completely capture the many ways this opportunity presents itself, fulfilling the responsibilities of her or his role is one important means by which an individual Associate contributes to Stanley's overall success.

Job Title: Senior Food Safety and Quality Program Manager Department: Compliance Reports To: Sr. Director of Compliance Job Type: Full time Travel: 20%-30% Compensation: pay range- $89,000-$111,000 based off experience Job Summary The Senior Food Safety and Quality Program Manager is responsible for developing, implementing, and improving comprehensive food safety and quality assurance programs across Versova's shell egg facilities. This role leads the QA team, ensures regulatory compliance, and promotes a culture of food safety throughout the organization. Essential Job Functions Develop, implement, and improve food safety and quality assurance programs Manage and develop QA personnel, ensuring adequate staffing for all processing shifts Ensure compliance with SQF, FDA, USDA, state, and customer regulations/standards Conduct routine reviews with operations management and lead third-party audits Provide training for QA team and operations personnel on food safety and quality assurance Investigate and resolve customer complaints and nonconformities Perform routine internal audits of shell egg facilities Serve as SQF Practitioner for shell egg facilities Promote a culture of food safety through operational engagement Collaborate with cross-functional teams to integrate food safety into all aspects of operations Stay current with industry trends and emerging food safety technologies Other duties as assingned Required Qualifications Bachelor's Degree in a related field (Quality Assurance, Food Science, Biology, Operations Management, etc.) or commensurate experience 7-10 years of experience in food safety and 5+ experience managing personnel HACCP certification (or ability to become certified) SQF certification (or ability to become certified) Excellent communication skills and proficiency in Microsoft Office suite Preferred Qualifications Experience in egg processing industry Demonstrated ability to gain employee buy-in for compliance programs Working knowledge of state and federal regulations related to food production Work Environment This role requires regular travel to our egg processing facilities. The position involves work in various climate conditions, including extreme heat and cold environments. Physical requirements include the ability to lift 50lbs and stand or walk for extended periods. The work environment is fast-paced and requires adaptability to manage multiple priorities in food safety and quality assurance. About Us: Versova is one of the largest egg producers in the United States, bringing together family-owned farms in Iowa, Ohio, Washington, Oregon, Idaho, Utah, and Colorado. With over six decades of industry experience, our team of more than 2,000 employees is dedicated to exceptional flock care, environmental stewardship, and producing safe, high-quality eggs. More than just a workplace, Versova is a team built on shared values, working together to enrich our communities and uphold the highest ethical standards. As a family of companies and a company of families, we are guided by a strong set of Core Values: Recognition, Initiative, Safety & Security, Service, Community, Respect, Integrity, Ownership, and Excellence. These values drive our commitment to responsible employment, sustainability, and industry innovation. When you join Versova, you become part of something bigger - working together to lead the future of egg production with integrity and excellence. Benefits: Regular performance reviews Health insurance Dental insurance Vision insurance HSA with company match Paid time Off Paid Holidays 401K with company match Tuition Reimbursement Employee Assistance Program Posting Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance. Disclosure This job description is not exhaustive, as employees may perform additional related duties as needed. Employment is based on an 'at-will' basis. Employment is contingent upon the successful completion of a background check, as applicable to the role and in compliance with local, state, and federal laws.

The Quality Program Manager will oversee new model launches, ensuring customer requirements are met and supplier schedules are maintained. This role involves coordinating timelines, tracking progress, resolving delays, and providing regular updates to customers on program status. Key Responsibilities Include * Manage new model launch activities for automotive customers * Ensure suppliers meet project schedules and quality standards * Develop and maintain project timelines and progress tracking tools * Identify and resolve delays or issues impacting program deliverables * Communicate status updates and reports to customers and internal teams * Support APQP processes and documentation throughout the program lifecycle Must Have * 2+ years of experience working in a similar role * Bachelor's degree or equivalent experience preferred * Automotive industry experience required * Basic knowledge of APQP * Strong program management and organizational skills * Ability to create schedules, track progress, and manage multiple priorities Nice to Have * Familiarity with automotive quality standards and launch processes * Excellent communication and problem-solving abilities * Proficiency in MS Office and project management tools Job Type & Location This is a Contract to Hire position based out of Bluffton, OH. Pay and Benefits The pay range for this position is $30.00 - $38.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Bluffton,OH. Application Deadline This position is anticipated to close on Jan 1, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Capstone Search Advisors is searching for a Quality Systems Specialist to oversee the development, implementation, and continuous improvement of the Quality Management System (QMS) to ensure compliance with FDA, ISO 13485, ISO 14971, EU MDR, and other applicable global medical device regulations. This role will provide leadership in maintaining quality system processes, driving compliance, and fostering a culture of quality across the organization. Key Responsibilities Manage and maintain the company's QMS in compliance with FDA 21 CFR Part 820, ISO 13485, and other applicable standards/regulations. Lead the implementation, monitoring, and continuous improvement of quality system processes (Document Control, Training, CAPA, Nonconformance, Audits, Change Control, Complaints, Supplier Quality, etc.). Ensure timely and effective execution of Corrective and Preventive Actions (CAPA) and provide oversight of root cause investigations. Plan, coordinate, and lead internal audits; support external audits and regulatory inspections. Oversee document control and training programs to ensure compliance and employee competence. Partner with cross-functional teams (R&D, Manufacturing, Supply Chain, Regulatory, Clinical) to embed quality requirements throughout the product lifecycle. Monitor and analyze quality metrics and provide regular reporting to senior management. Ensure supplier quality management programs are compliant, including supplier qualification, audits, and performance monitoring. Serve as the SME (Subject Matter Expert) for QMS processes during regulatory inspections and customer audits. Mentor and develop quality team members, fostering a culture of compliance, accountability, and continuous improvement. Qualifications Bachelor's degree in Engineering, Life Sciences, Quality, or related field 3+ years of quality experience in the medical device or related regulated industry Strong knowledge of FDA 21 CFR Part 820, ISO 13485, ISO 14971, EU MDR, and related global quality system regulations. Experience leading audits (FDA, ISO Notified Body, MDSAP preferred). Proven track record of managing CAPA, nonconformance, change control, and complaint-handling systems. Excellent leadership, communication, and cross-functional collaboration skills. Proficiency with electronic QMS platforms (eQMS) strongly preferred.

At Danis, quality isn't an afterthought - it's built into every phase of our work. Our Quality Control team leads the charge in ensuring our projects meet and exceed the highest standards of craftsmanship, safety, and performance. We're looking for a Quality Control Manager who brings a mix of field experience, technical expertise, and strong communication skills - someone who can lead quality efforts from the ground up while supporting project teams in delivering exceptional results. If you're a former superintendent, foreman, or technical expert who knows what "right" looks like because you've built it yourself, this is an opportunity to shape how quality is executed across multiple high-profile projects. What You'll Do You'll oversee the quality control process from pre-construction through project completion - providing technical guidance, ensuring compliance, and building a culture of continuous improvement. Responsibilities Day-to-day, you will: * Create and manage testing logs based on project specifications and drawings. * Perform in-house testing for key systems - including windows, roofing, metal panels, and other facade components. * Coordinate and conduct on-site inspections, ensuring subcontractor work aligns with drawings, submittals, and contract requirements. * Plan and lead pre-installation meetings with project teams, subcontractors, testing agencies, and design/owner representatives. * Monitor project QC performance, verifying that inspection logs, deficiency lists, and metrics are properly maintained and up to date. * Troubleshoot and resolve construction issues during and after installation - offering practical, cost-conscious solutions. * Communicate effectively with project managers and superintendents to provide repair options, clarify installation methods, and advise on sensitive execution or cost issues. * Review submittals and third-party reports for spec conformance, constructability, and QC relevance. * Attend key meetings including kick-off, turnover, pre-installation, and coordination sessions. * Assist with hands-on activities when needed to help teams meet milestones and deadlines. * Participate in project closeout and post-mortem reviews to identify lessons learned and drive program improvement. Beyond the Jobsite You'll also play a key role in shaping and strengthening our companywide Quality Program. * Develop relationships within the QC community and identify industry trends. * Collaborate with AGIC Quality Incentive Programs to align our practices with best-in-class standards. * Lead QC training initiatives - identifying resources, materials, and tools that elevate our quality processes. * Contribute to preconstruction efforts, providing insight into subcontractor quality performance and RFP language. * Mentor and support project teams, sharing knowledge and promoting communication across disciplines. Qualifications What You Bring * Bachelor's degree in Civil Engineering, Construction Management, or Architecture. * 10+ years of experience in commercial construction or architecture, with large project exposure ($20M+). * Proven experience in quality management, project management, or building envelope construction. * Strong understanding of ASTM testing procedures, specifications, and reporting requirements. * Experience with Procore, BIM 360, or similar field management software. * Comprehensive knowledge of building materials, MEP systems, and exterior skins. * Excellent communication, organization, and problem-solving skills. * Ability to perform and interpret field testing, diagnose issues, and lead remediation efforts. * We'd especially value someone with a field background - such as a superintendent, foreman, or experienced trades professional - who has spent years working with tools and understands construction quality from firsthand experience. Why You'll Love Working Here * You'll lead meaningful work that impacts every structure we build. * You'll collaborate with dedicated teams that take pride in craftsmanship and precision. * You'll have access to training, professional development, and technology that support continuous growth. * You'll join a company that values trust, teamwork, and doing things right - every time. Why Choose Danis for Your QC Career: Competitive Total Compensation * Annual merit increases and bonuses recognizing your growing expertise * Profit sharing because your success drives our success Comprehensive Benefits Package * Full health, dental and vision insurance for you and your family * Short-term, long-term, and supplemental insurance coverage * Life insurance for peace of mind Professional Development * Danis University: 45+ training programs to advance your safety expertise * Certification reimbursement and continuing education support * Clear career progression paths within our growing organization Work-Life Integration * Generous vacation and PTO policies * Flexible spending accounts (FSA) and Health Savings Account (HSA) options * 401K retirement planning Purpose-Driven Culture * "Constructing Hope" community outreach program * Work for a company that genuinely values safety over shortcuts * Be part of a team that's building more than structures-we're building careers and communities Build the future of quality.Join a company where your technical expertise and field experience truly make a difference! EEO Statement Danis is an Equal Opportunity Employer. Danis does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need. NO AGENCY CALLS OR SUBMISSIONSDanis does not accept unsolicited resumes from recruitment agencies. Any resumes submitted without a signed agreement will be considered the property of Danis, and no fees will be paid. #LI-ONSITE

**SIGNING BONUS AVAILABLE FOR A LIMITED TIME! APPLY TODAY!** State Bank, a growing Community Bank, has an opportunity for a self-motivated and leadership-minded individual to join and lead our team of Quality Control Analysts. We are seeking a Full Time Quality Control Manager. This position is responsible for leading our Quality Control Analysts Group in order to establish advanced quality controls and to implement continuous improvement standards and procedures for State Bank. A B.S. or B.A. or equivalent preferred, or experience in lieu of degree; Mortgage Lending, HMDA and Quality Control training or practical experience. Experience in mortgage and commercial lending or related positions required. Consumer, SBA, and Retail banking deposit experience preferred. State Bank offers an extensive benefits package including paid vacation and PTO, medical/dental/vision insurance, company-paid life and AD&D insurance, a company-matched 401(k) retirement plan, company-provided short and long-term disability, quarterly incentive payouts, a community volunteer program, and growth opportunities. Apply today and see why State Bank is a great place to work! Equal Opportunity Employer

The Manager, Supplier Quality, is responsible for ensuring that the materials and components supplied by suppliers meet American Battery Solutions (“ABS”) quality standards. The Manager, Supplier Quality manages a team of quality engineers to oversee quality audits, conduct root cause analysis, implement corrective action and permanent solutions to prevent recurrence. This role develops partnerships with suppliers and drives continuous improvement initiatives such as lean and Six Sigma to improve their performance. Responsibilities: Lead supplier quality engineering team to complete audits on components to ensure compliance with ABS quality standards. Drive resolution of quality issues with suppliers identifying root causes, implementing corrective actions and establishing permanent corrective actions to prevent reoccurrence. Develop and implement Advanced Product Quality Planning (APQP) processes with suppliers to ensure smooth transition from design to production. Drive problem solving activities including supplier sorting, third party sorting at ABS site or off site and ensuring timely RMA of the suspect material back to the supplier without negative impact to the ABS production. Train and coach suppliers and quality team on tools to improve performance such as lean, Six Sigma, 5 Whys, Fishbone, FMEA. Develop and maintain supplier performance management systems including supplier metrics, and scorecards to use data to drive improvements. Ensure Production Part Approval Processes (PPAPs) are completed for production components. Collaborate with product teams and SDE to identify and implement quality requirements for new products, including critical characteristics and testing parameters. Develop, maintain and enhance systems to support the ISO / TS 16949 quality system Assist with logistics, including communications with vendors when there are packaging and receiving issues when materials arrive at the receiving dock. Adhere to federal and state regulations. Adhere to all company policies, processes, and procedures. Performs other duties as requested, directed, or assigned. Predictable and reliable attendance. Position Qualifications: Bachelor's degree in Engineering, Quality Management, or a related field. Minimum of five (5) years of experience in quality, product development, and/or purchasing. Minimum of three (3) years of progressive leadership experience. Strong understanding of quality management systems (ISO 9001, IATF) and quality tools (5 Whys, Fishbone, PPAP, FMEA, SPC, Kaizen, Six Sigma Green Belt). Proven experience in supplier quality management, including supplier development and performance monitoring. Excellent communication and interpersonal skills to effectively collaborate with cross-functional teams and suppliers. Strong analytical and problem-solving skills to identify root causes of quality issues. Experience in new product development processes and project management. Ability to communicate and make presentations to an audience effectively in a formal setting. Key Competencies: Focuses on Quality: Drives work results with a quality focus on actions and results. Decision Making & Analysis: Makes sound decisions based upon a mixture of data-driven analysis, expertise, experience, and judgment; collects relevant information, seeking input from others, and identifies connections and/or root causes of problems Develops and Manages Employees: Actively develops knowledge, skills, and abilities of employees to leverage high performance. Influences Others : Has personal and organizational impact built on mutual trust, fairness, and honesty. Flexes their style to direct, collaborate, or empower as the situation requires. Delegates Effectively: Assigns work to others to maximize time for strategic thinking and actions. Provides clear guidelines, monitors, redirects, and sets limits as needed. Provides Continual Improvement: Displays a consistent orientation toward producing the highest quality products or services, while keeping a focus on sustainability. Constantly looking for incremental improvements in work processes and results. Delivers Results: Achievement-oriented, feeling a sense of urgency to reach goals on time, if not before. Physical Requirements / Working Conditions: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Prolonged periods sitting at a desk and working on a computer. Constantly operates a computer and other office equipment. Ability to adjust focus, especially due to concentration on a computer screen. Works in a temperature-controlled office environment, with occasional work in outdoor weather conditions, and in industrial environments. Ability to travel up to 20% to supplier locations for audits and on-site. Why Join Us American Battery Solutions (ABS) provides comprehensive 100% employer paid benefit plans to employees and their family, competitive salary and retirement program. ABS employs a diverse and inclusive workforce. Benefits Overview Paid time off includes 4 weeks, 15 holidays, and parental leave. 100% company-paid medical, dental, vision, short-term disability, long-term disability, and life insurance. Flexible Spending Account (FSA) and Health Savings Account (HSA) offerings. Company provided 401K savings plan with immediately vested matching contributions to help you save for retirement. Voluntary benefits offerings. Tuition assistance. Employee Referral Program. Employee development and career growth opportunities. About Us American Battery Solutions Inc. (“ABS”) is a manufacturer of advanced batteries for commercial, fleet, and industrial on- and off-road vehicles. Located in the heart of the U.S. automotive region with facilities in Michigan and Ohio. In 2023, ABS was acquired by Komatsu, a world leader in construction, mining, forestry, and industrial heavy equipment in support of Komatsu's 2050 carbon neutrality goal. ABS continues to operate as an independent entity serving Komatsu applications while continuing to expand and grow our core commercial, fleet and industrial business. As we have grown, ABS has assembled a world-class team of dedicated and experienced engineers. This team is equipped with a deep understanding of high-voltage, automotive-grade battery systems from concept development and prototyping, to testing and validation, to high-volume production. We pride ourselves on developing a diverse team of next generation battery experts. The Location - Springboro, OH American Battery Solutions Advanced Battery Manufacturing Center is located in beautiful and historic Springboro Ohio. Life in Springboro is all about the quality and character of our community and that is why Springboro continues to be a top-ten-rated City to live, work, play, and raise a family. In fact, Springboro was rated #3 among the top 10 communities in greater Southwest Ohio. In essence, Springboro appeals to everyone from young families to people looking for the perfect place to retire. Our great neighborhoods, excellent schools, safety, services, and amenities all contribute to Springboro's exceptional quality of life. Springboro offers a variety of public programming that includes outdoor concerts, festivals, and fireworks. Our residents enjoy bike and walking trails, an 18-hole public golf course, a charming and vibrant historic district, and 501 acres of parks. AMERICAN BATTERY SOLUTIONS IS AN EQUAL OPPORTUNITY EMPLOYER.

Plans, coordinates, and directs quality control and assurance programs designed to ensure continuous production of products consistent with established standards by performing the following duties personally or through direct reports. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. * Lead, train, and develop QC inspectors and QA engineers. * Oversee daily quality operations to meet production schedule. * Develops and analyzes statistical data and product specifications to determine present standards and establish proposed quality and reliability expectancy of finished product. * Formulates and maintains quality control objectives complementary to corporate policies and goals. * Creates and implements inspection criteria and procedures. * Coordinates objectives with production procedures in cooperation with other operations management team to maximize product reliability and minimize costs. * Oversee team that provides inspection activity for product throughout production cycle. * Applies total quality management tools and approaches to analytical and reporting processes within each department. * Directs workers engaged in inspection and testing activities to ensure continuous control over materials, facilities, and products. * Plays active role on quality management teams within organization. * Investigates customer complaints regarding quality. * Work with suppliers to ensure raw materials and components meet required quality standards before they are used in production. REQUIRED COMPETENCY To perform the job successfully, an individual should demonstrate the following competencies : Quality - Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality. Leadership and Management - Ability to lead and motivate quality teams. Problem-Solving - Ability to resolve quality related problems and implement corrective actions. Communication Skills - Strong ability to communicate with cross functional teams, management, and stakeholders. Technical Proficiency - In-depth understanding of company and industry quality standards and trends including AS9100 and ISO 9001 Safety and Security - Observes safety and security procedures; determines appropriate action beyond guidelines; reports potentially unsafe conditions; uses equipment and materials properly. SUPERVISORY RESPONSIBILITIES Manage and provide guidance to quality control personnel, training employees on quality standards and processes. Is responsible for the overall direction, coordination, and evaluation of this unit. Carries out managerial responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Bachelor's degree (B. A.) from four-year college or university; and seven to ten years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. CERTIFICATES, LICENSES, REGISTRATIONS CQM, CQE, CQT, CQA or any other ASQC certifications helpful. ISO9001and AS9100 experience required. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit and talk or hear. The employee frequently is required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee is occasionally required to walk and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually moderate.

Quality Control Systems Manager (CQC) - Federal and Public Construction Due to an increase in awarded projects, Place Services, Inc. and its partners are looking to hire a Construction Quality Control Manager to oversee the onsite daily quality control and safety of PSI Federal and Public General Construction projects. Reporting to the PSI and partner Project Site Superintendent in the Federal and Public (F&P) division, the Construction Quality Control Manager contributes to Place Services, Inc. and its partners' success by providing the planning, organizing, and oversight of the assigned project; completing quality and safety inspections; supervising sub-contractors and staff on Federal and Public agency construction projects all while maintaining the highest standards of excellence. Must have at least 10+years of experience in the construction industry and trades with 5+ years in a Quality Control role and Site Supervisor with extensive experience in Quality Control and Safety Programs in medium to high complexity Commercial, Industrial, Federal, or Public construction projects. Who is Place Services? " Building Our Company by Building Our People " Place Services, Inc. is a nationwide Commercial General Contractor and Subcontractor company specializing in remodeling and new construction of retail Big Box stores. PSI was founded in 2006 and has grown into a $100+ million dollar company. We have worked for a wide range of clients and retail giants including the Air National Guard in Ohio, Delaware City Schools Ohio, Walmart, Publix, JC Penny's, Best Buy, CVS, RaceTrac, QuikTrip, Kroger, and Macy's, and is continuing the company's explosive growth with recent new work in the Federal and Public Government. Purpose of this Job… The Construction Project Quality Control Manager will be full-time onsite daily to ensure the construction and renovation of the Laboratory (Bldg. 310) for project 552-18-101, at the Dayton VA Medical Center, 4100 W. Third Street, Dayton, OH 45428-9000. The project duration is 925 calendar days from the PSI's receipt of Notice to Proceed (NTP) and will require daily oversight of the project site ensuring quality and safety of all project stakeholders and activities from a seasoned and experienced construction professional able to manage numerous sub-contractors and a provide exceptional quality and products to Veterans Administration. What you will be responsible for… Supervise, inspect and ensure seamless day to day schedules and operations of PSI and partner employees and subcontractors on VAMC Dayton OH Serve as the PSI onsite Construction Quality Control (CQC) Completing all required on-site paperwork. Ability to coordinate site access for all project stakeholders Coordinating construction project schedules and operations with subcontractors and PSI employees Representing PSI with professionalism and integrity Schedule, manage, and assist, as needed, subcontractors Set expectations of subcontractor and hold them accountable for quality and safety Provide direct accountability for contract submittals and processes Complete reports and documentation required or requested by management Inspect and secure job site to prevent damages and theft Ensure a safe work environment by following and enforcing OSHA safety standards. Ensure OSHA compliance Establish sequence & manner to carry out work, consistent with Project Site Superintendent's direction and to keep the project on schedule Ability & willingness to study, understand, direct, perform, based on construction drawings Prepare and document job meetings, safety meetings, reports, daily pictures & logs Be willing to physically work as needed Always be willing to accomplish other project-related tasks and support that may be required at any given time Required Skills & Abilities… Reading and understanding construction drawings and Federal specifications to include project schedule critical path activities, quality control requirements, and safety standards Must fluently speak and write English, Bi-Lingual speaker a plus Strong verbal and written communication skills Time Management skills are imperative Intermediate computer skills including Word, Excel, Outlook Must be computer savvy with spreadsheets, sending pictures, Excel & Word programs Ability to be onsite daily during required working hours and travel as required and have a valid US driver's license. Able to pass a background check for project site access OSHA & CPR training or certification with USACE EM 385-1 experience or certification. Must be able to identify hazards and ensure safety compliance at all times. Highly desired to have current USACE Construction Quality Management (CQM) certification or be able to obtain it within 90 days of hire Required Education & Experience… Previous experience as a Construction Site Superintendent, Quality Control Manager, and SSHO on medium to highly complex Federal or Public construction projects Minimum 10-year experience in a construction role with 5 of those years in a QC role on complex commercial or federal projects. Demonstrated experience and success with Quality Control and Site Safety and Health processes. Preferred recent experience on USACE and/or NAVFAC construction projects and processes Graduate of Engineering, Architecture, or Construction Management degree program What PSI offers Family-owned company Above industry standard salary Mileage, Hotel, and Per Diem pay Multiple Health Insurance plans and Accident Insurance 401(k) Paid time off, and holidays As an EEO employer, Place Services, Inc. is committed to providing all applicants and employees with equal access to employment opportunities, regardless of sex, race, age, color, national origin, disability, pregnancy, religion, genetic information, sexual orientation, transgender status, gender identity, marital status, veteran status, or any other characteristic protected by federal, state, or local law. Place Services, Inc. shall abide by the requirements of 41 CFR 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on protected veteran status or disability and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans and individuals with disabilities.

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.” We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! JOB PURPOSE The Lead Auditor / Quality Management System (QMS) Specialist is responsible for the overall facility internal auditing activities. The Lead Auditor / QMS Specialist all QMS and Audit related activity for the facility, while consulting and advising departments and ACIE / CIE / Top Leadership on QMS gaps and/or improvements by summarizing and reporting QMS / Audit activity on a regular basis. This role supports the N.A. QMS Committee and represents the facility as an ISO SME/QMS. Additionally, this role also interfaces with the Global Honda QMS (G-HQS) committee as well as the Japan Quality Compliance and Audit Division (QCAD) for QMS compliance and monitoring of the internal audit program results. KEY ACCOUNTABILITIES QMS Related: Lead / Assist development and maintenance of the Russells Point, Ohio facility level procedures (QAPs). Lead training activities for QMS related items within the Russells Point, Ohio facility. Support the NA Quality Committee for the development and implementation of the Honda North American Quality Manual and supplements as the Russells Point, Ohio facility Lead. Serve as the facility administrator for DocuQuest, PeopleQuest, AuditQuest and RecordQuest. Support development, implementation, and maintenance of the quality management system based on ISO 9001, G-HQS, NA QMS and local QMS requirements. Auditing Related: Serve as the ISO 9001 Lead Auditor for Russells Point, Ohio facility. Co-Lead for External audits of ISO 9001 Certification Registrars and support Regional N.A. or HDMA audits as requested. Issue Internal audit plans, conduct audits per the approved audit plan, and issue audit reports, obtaining all required approvals and maintaining the records for the completed internal audits Review and support the evaluation of Root Cause Analysis, Temporary and Permanent Countermeasures proposed from departments where gaps are identified and confirm their effectiveness at planned intervals. Support development, training, and management of the internal auditing team for ISO 9001 Support the development of the overall internal audit program as well as the training and management of the internal auditing team for ISO 9001. Reporting Related: Liaison and Support to the PUO CIE and/or TMP-OH ACIE's, providing updates related to the health of the Quality Management System, including the implementation of continual improvement objectives Co-lead QMS Committee Meetings monthly on the Local Level, provide facility updates of Procedural Changes, facility specific activity and promote the incorporation of new ideas for continual improvement Provide weekly audit finding status updates to Top Management during weekly quality meetings Carry out special projects/tasks as assigned by Leadership such as special audit items, BOP Theme activity, etc., as needed QUALIFICATIONS Bachelor's Degree or equivalent experience (relevant manufacturing, quality, and auditing experience) Internal Auditor Certification (Lead Auditor Certification preferred) 2-6 years of manufacturing / quality experience, including minimum of 1 year of related QMS and/or auditing experience. Knowledge of Honda's Computer/Web-based systems (MS Office/Teams, IntellaQuest etc.) Knowledge of Honda's Business Plan and Theme activity Knowledge of Honda's Quality Management System (QMS) Knowledge of Honda's SEQCDM guidelines / requirements within area of responsibility Highly motivated with positive, strong work ethic and initiative with the ability to self-learn Solid communication and presentation skills with the ability to share information and interact with multiple departments Ability to prepare information and present to large groups, including various levels of associates up to Top Leadership Excellent time management and organization skills with the ability to multi-task Flexibility and adaptability to respond quickly and effectively to rapidly changing priorities and/or special requests Effective leadership skills, with the ability to work in Teams and lead special projects cross functionally Strong critical thinking skills and problem-solving methodology Demonstrate the initiative and ability to make solid decisions under pressure WORKSTYLE This position works in an open office environment and requires primarily desk work, including frequent meetings, as well as occasional production floor visits for audit related activity. Travel may be necessary for NA QMS Committee Quarterly meetings and/or travel to other plants for QMS Audit support. OT necessary to complete task deadlines for BOP/Theme scorecards as well as occasional Teams meetings with Japan QCAD or internal plant meetings related to Audit activity/reporting to meet necessary NCR deadlines. What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development programs Additional Offerings: Tuition Assistance & Student Loan Repayment Lifestyle Account Childcare Reimbursement Account Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Job Description Position Overview: We are seeking a skilled and experienced Quality Technician Lead to join our team. This role will report to the Quality Supervisor and is responsible for performing in-process and final inspections using a wide variety of inspection gauges and techniques. The Quality Technician Lead will provide a first layer of oversight, assist with training, and resolve technical issues. A strong understanding of engineering drawings and inspection techniques is essential for this role. Key Responsibilities: Perform in-process and final inspections using a variety of inspection gauges and techniques to ensure product quality and compliance with specifications. Provide first-level oversight to the quality inspection team, ensuring adherence to quality standards and procedures. Assist in training new and existing team members on inspection techniques, quality standards, and the use of inspection equipment. Resolve technical issues related to inspection processes and equipment, providing guidance and support to the team. Interpret and understand engineering drawings, specifications, and other technical documents to perform accurate inspections. Document and report inspection results, non-conformances, and other quality-related data. Collaborate with the Quality Supervisor and other departments to address quality issues and implement corrective actions. Participate in continuous improvement initiatives to enhance inspection processes and overall product quality. Qualifications: High school diploma or equivalent; additional technical or quality-related certifications are a plus. Previous experience in a quality inspection role, preferably in a manufacturing or aerospace environment. Strong understanding of engineering drawings and inspection techniques. Proficiency in using a variety of inspection gauges and equipment. Excellent attention to detail and organizational skills. Strong communication and interpersonal skills. Ability to work independently and as part of a team. Problem-solving skills and the ability to resolve technical issues effectively. Skills and Competencies: Proficiency in quality management tools and techniques. Ability to manage multiple projects and priorities. Strong attention to detail and organizational skills. Ability to work collaboratively with cross-functional teams. Proficiency with Office products Benefits 401(K) Retirement Plan with Company Match Medical, Dental, Vision - Complete Health Care Package Company paid short-term, long-term and life insurance. 10 Paid Holidays Vacation and Sick Time Safety shoe and eye glass allowance Maverick Molding & PPR is an Equal Opportunity Employer Committed to Diversity/M/F/D/V #hc178593

Competitive Pay: This position offers an hourly wage ranging from $33.48/hr. to $42.00/hr., depending on experience and qualifications. IFM Quality and Finishing Technician Lead The IFM (Cleaning) Quality and Finishing Technician Lead will provide repair and preventive maintenance services for qualified customer equipment at customer locations. In addition, must have strong, Industrial, Paint commercial HVAC, air quality, and filtration knowledge. Essential Duties and Responsibilities: ● Be the industry expert in a focused application or product line ● Troubleshoot, repair and service customer equipment by diagnosing problems ● Perform product training for customers as part of a preventative maintenance program ● Perform advanced training on equipment for other technicians ● Responsible for providing field service, train customers on basic preventative maintenance, and maintenance support of industrial automation equipment ● Lead Industrial, Paint commercial HVAC preventative maintenance, filtration, and indoor air quality projects. Cleaning of various facility's and process and components ● Answer customer inquiries regarding repair questions ● Prepare documentation regarding work performed and enter in computer ● Establish and maintain relationships with key vendor contacts for service and repair ● Maintain service equipment including performance test before use, document and track use by employees or customers, flush/clean/repair as needed upon return from use, test and put into storage when done. ● Identify, plan, and assist in managing special jobs and projects, as requested ● Participate in product training, as required ● Participate in product demonstrations with salespeople in our lab and in the field. ● Participate in establishment of contracts for repair and maintenance service. ● Assist in lab clean-up and review for safety issues. ● Other duties, as assigned Qualifications ● Ability to lead a technical team ● High school graduation or equivalency; emphasis on office, shop or other skills ● Ability to travel 50% or more; overnight travel may be required ● Minimum 7 years' experience in skilled trades; or proven equivalent experience ● Minimum mold certifications and duct cleaning, or ability to obtain within the first 6 months of role, from primary vendors of the Finishing, Dispensing & Filtration group (Graco, GEMA, Fanuc, Sames, CFT, etc.) ● Minimum 5 years' experience in a focused application or product line ● Minimum 3 years' experience of at least 2 of the following: General Industrial, Paint, Finish, Powder Cleaning, Commercial HVAC, filtration, mold abatement, and duct cleaning. ● Proven mechanical and electrical knowledge sufficient to diagnose and resolve equipment problems ● Proven experience in disassembling equipment needing repair, diagnosing problems, cleaning and refurbishing/replacing parts as needed, reassemble, and test ● Proven experience in using/operating tools such as wrenches, drivers, and power tools ● Proven experience using electrical diagnostic equipment ● Proven experience reading and understanding documents such as policy manuals, safety rules, operating and maintenance instructions, and procedure manuals; ability to write routine reports and correspondence. ● Proven experience in effectively communicating information and responding to questions in person-to- person and small group situations with customers, clients, general public and other employees of the organization. ● Familiarity with 5S ● Proficient in Microsoft Office Suite (Excel, Word, Outlook, Teams) ● Ability to understand written and oral English and be proficient with computer, email, spreadsheets and look up documents online ● Ability to learn and use OTC's computer systems to create and maintain required records regarding equipment repair and service ● Ability to operate forklift, and a pallet jack ● Ability to meet the physical requirements of the job ● Valid driver's license with driving record acceptable to OTC insurance company ● Must be able to work in an environment with possible paint and solvent odors present ● Ability to work in environments that may include: * Moving mechanical parts * Fumes or airborne particles * Painting chemicals and solvents * Electrical equipment Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. ● Requires ability to walk, climb, stand, carry materials, stoop, kneel, bend at waist. ● Maximum unassisted lift = 50 lbs. Average lift less than 50 lbs Competencies To perform the job successfully, an individual should demonstrate the following competencies: ● Adaptability - Ability to be flexible and adjust to changes in your work environment. You can respond quickly to changing ideas, responsibilities, expectations, trends, strategies and other processes. Being adaptable also means possessing soft skills like interpersonal, communication, creative thinking and problem-solving skills. ● Accuracy - Ability to detect errors in normal course of work by standard check or routine crosscheck. Errors resulting from inaccuracy would create minor confusion, delay or expense to correct the situation. ● Dependability - Follows instructions, responds to management direction; Keeps commitments. ● Initiative - Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. ● Customer Service - Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance. ● Problem Solving - Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work; Develops innovative approaches and ideas; Presents ideas and information in a manner that gets others' attention. ● Planning/Organization - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Develops realistic action plans. ● Communication and Interpersonal Skills - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Demonstrates group presentation skills. ● Collaboration - Ability to work with others to achieve a common goal; Building and maintaining relationships through shared responsibility, respect, and empathy.

Full-time Description Schedule would be 7p-7a - rotating schedule. Must have good computer skills MAJOR FUNCTIONS: · Collect product samples · Analysis of raw materials · Testing of specific levels in samples · Documenting results · Data review for compliance · Calibrate and maintain lab equipment RESPONSIBILITIES: Receive, label and analyze samples. Conduct routine and semi-routine analysis of raw materials, in process and finished formulations. Execute laboratory testing according to standard procedures, make observations and interpret findings. Test samples for color variation, intrinsic viscosity, level of contamination, etc. Organize and store all chemicals substances, fluids and compressed gases according to safety instructions. Record all data and results in specified forms (paper and electronic) with accuracy and responsibility. Maintain/calibrate equipment and assist in ordering laboratory supplies. Ensure that all safety guidelines are followed strictly at all times and maintain a clean and orderly environment. Other duties as assigned. Requirements Ability to use technology, good at working with hands, physically able to stand for long periods of time, detail-oriented. Self-starter, aggressive work ethic and ability to work with minimal supervision. Safety conscious. Must be flexible to work any shift and/or to adjust shift when necessary. Ability to follow written and verbal instructions. MINIMUM QUALIFICATIONS: Legally eligible to work in the United States. Must be able to read and speak the English language well enough to communicate, understand, and respond to questions, instructions, signs, signals, and safety training. WORKING CONDITIONS · Exposure to dust, noise, heat, cold, and fumes found in a shop environment. · May come in contact with hazardous materials. · Exposure to equipment traffic. · Full training and personal protective equipment are provided when required. Salary Description $17-$22 per hour

The Dayton Cores and Castings (DCC) facility is a GE Aerospace manufacturing shop that makes HPT Airfoil Cores and Castings. We are a low-rate production shop that develops the leading edge of airfoil technology to deliver value through new product introduction and manufacturing industrialization. We are proud to have been awarded OSHAS's highest safety rating. As the Metallurgical Laboratory Manager, you will be responsible for leading day-to-day operations of the metallurgical and materials testing laboratory to ensure compliance with GE Aerospace quality standards, customer requirements, and regulatory/industry specifications. In this role, you will oversee laboratory personnel, ensure accuracy and integrity of all metallurgical evaluations, and support production, Quality, Engineering, and Turbine Airfoils Value stream teams with a timely and reliable technical data. This role is in Beaver Creek Ohio, just outside Dayton. Job Description Roles and Responsibilities: * Lead and manage metallurgical lab technicians, providing guidance, workload management, training and performance feedback * Plan and prioritize laboratory testing, including microstructure evaluations, SEM analysis, failure analysis reports, and other material characterization evaluation from Quality/Engineering/Casting Technology teams * Ensure compliance with GE Aerospace specification requirements and procedures, industry standards (e.g. AS9100/ISO, AS13100, NADCAP) * Review and approve laboratory reports, ensuring accuracy, completeness, analysis and traceability of testing evaluations * Manage laboratory equipment, ensuring calibration, maintenance, and readiness of metallographic equipment, microscopes and other analytical instruments * Coordinate metallurgical investigations to support Quality, Engineering, and Manufacturing * Maintain traceability of samples, current documentation, test records, and electronic data systems in accordance Quality Management Systems. * Drive continuous improvement including 5S, waste reduction, and process optimization within the laboratory * Support audits (internal & external, NADCAP, AS9100, AS13100) to ensure corrective actions are implemented promptly * Ensure safety compliance, including proper use of PPE, chemical handling procedures, and maintaining a safe laboratory environment * Collaborate with Quality Engineers, Engineering, operations and leadership, providing materials and process insights, failure analysis reports, and technical recommendations Required Qualifications * Bachelor's Degree from an accredited college or university (or a high school diploma / GED with a minimum of 4 years of experience in Metallurgical and/or Materials testing laboratories. Aerospace preferred) * At least an additional 3 years of experience in Metallurgical and/or Materials testing laboratories Desired Characteristics * Prior leadership or supervisory experience * At least 5 years' experience in Metallurgical or Materials testing laboratories (Aerospace preferred) * Bachelor's degree in Metallurgical Engineering, Engineering, Materials Science, or related field * Experience in Metallurgical, materials properties, heat treatment, alloys, and ceramic cores * Knowledge in APQP (Advanced Product Quality Planning) and PPAP * Knowledge of AS9100, AS13100 and AS9102. * Ability to analyze problems, identify root causes, and provide efficient and effective corrective actions * Humble: respectful, receptive, agile, eager to learn * Transparent: shares critical information, speaks with candor, contributes constructively * Focused: quick learner, strategically prioritizes work, committed * Collaborative and strong communicator * Problem solver: analytical-minded, challenges existing processes, critical thinker GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No