Quality/reliability engineer jobs near me

About Us Trinity's core values represent an assurance of quality, professionalism, and reliability. To us, they are the foundation of our company, the standards against which we constantly judge ourselves. We are focused on client satisfaction, employee growth, and quality assurance. Trinity Consultants is committed to achieving optimal performance with minimal adverse environmental and societal impacts. Trinity is committed to the health and safety of our employees and the protection of the environment. Effective Health, Safety, and Environmental (HSE) protection in our business is every employee's responsibility for every activity that is conducted in our workplace or while at client facilities. ESSENTIAL DUTIES AND RESPONSIBILITIES Prepare air permit applications, for client projects in accordance with applicable local, state, and/or federal agency air regulations or standards. Perform emission calculations. Review and evaluate state and federal regulation applicability. Prepare, review, and submit regulatory reports and routine compliance reports as required by permits and applicable regulations. Review and analyze results of emissions testing. Knowledge or experience with air dispersion modeling. Assist clients with permitting strategy and developing pathways to continuous compliance. Communicate with clients and regulators as appropriate. Support preparation of proposals. Qualifications: Bachelor's, Master's, or other advanced degree in Environmental/Chemical/Civil Engineering. Minimum 2 years of experience in environmental consulting, focused on air quality. Advanced working knowledge of Excel and an understanding of the Windows operating system and Microsoft Office 365. Demonstrated understanding of state and federal air quality regulations and specific knowledge of general air permitting process: NSR, Title V, PSD, NSPS, NESHAP, BACT, etc. Excellent written and verbal communication skills and ability to coordinate and work effectively in a team setting. Ability to work independently in a remote work situation when needed. Excellent attention to detail and completeness. Must be able to perform multiple tasks with firm deadlines, sometimes deadlines could be simultaneous. (The specific statements shown in each section of this description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job.) SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities.

Feasibility study of design concepts and product manufacturability. Identify and implement best practices from past models. Develop and establish efficient manufacturing processes Develop manufacturable and scalable design solutions by aligning engineering specifications with factory capabilities and project goals. Support physical verification of the vehicle during initial production at the factory. Ability to work with a team to identify and resolve design/manufacturing issues. Experienced in working on CATIA V6, 3DExperience and Delmia

Aerospace Lubricants, a division of AMSOIL INC, is currently seeking a Process Controls Engineer. This position is responsible for designing, implementing, and optimizing control systems to improve manufacturing efficiency, product quality, and safety. Aerospace Lubricants is a specialty grease manufacturer located in Columbus, Ohio. We manufacture products for everything from defense systems and spacecraft to offshore boats and motorcycles. Shift: Monday through Friday from 8:00AM to 5:00PM Core Responsibilities: • Design, develop, and maintain control systems including PLCs, HMIs, SCADA, and DCS platforms. • Program and configure automation equipment to support manufacturing processes. • Analyze process data to identify opportunities for improvement and implement control strategies. • Collaborate with process engineers, maintenance, and operations teams to troubleshoot and resolve control system issues. • Maintain documentation for control systems including schematics, code, and change logs. • Provide training and technical support to operations and maintenance personnel. • Accountable for knowing the manufacturing process including blending and packaging equipment. • Recommend preventive maintenance, predictive activities, and upgrade assessments. • Responsible for equipment-related uptime performance of the AMSOIL INC. production process including downtime tracking, lead uptime improvement projects, and report generation. • Work with other departments to develop and implement optimization strategies. • Justify and source new equipment required to optimize systems. • Ensure equipment FAT and SAT qualifications are completed. • Support Continuous Improvement initiatives to drive waste reduction and increase operational efficiency. • Participate or lead projects to improve quality, speed, and functionality of existing AMSOIL equipment and assets. • Manage projects related to AMSOIL INC. facilities, equipment, and new installs including bid packages, proposal evaluation, process design and functionality, budget management, and qualification and startup. Position Requirements: • Bachelor's degree in an Electrical Engineering or related Engineering (Industrial, Mechanical) or a 2-year technical degree with equivalent combination of related training and experience. • Experience in process controls engineering concepts. • Knowledge of PLC programming and interfacing control concepts into a manufacturing environment; preference for Allen Bradley experience or similar platform. • Experience with SCADA systems and data historians (Ignition - preferred). • Proven experience in practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of goods. • Knowledge of production processes and quality control techniques for maximizing the effective manufacturing and distribution of goods. • Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models. • Identify complex problems and review information to evaluate option and implement solutions. • Excellent written and verbal communication skills. • Desire to work within a team is necessary. • Competent in complete MS Office Suite. • Knowledge of JD Edwards or comparable ERP system. • Ability to manage multiple priorities. • Knowledge of SQL Databases. • Valid driver's license, clean driving record and the ability to be insurable for AMSOIL INC. vehicles. • This position does require travel 25% of the time. • Professional Engineer PE (preferred). • Lean Manufacturing / Six Sigma (preferred).

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.” We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Job Purpose As a Senior Material Engineer, the associate works independently and with diverse research and design/development teams in performing a full range of materials research, R-Theme project and work request activities relevant to departmental and organizational needs including Technical Pre-Investigation (TPI) research/summary, R-Theme project management/support, material specification development, new supplier qualification, parts failure analysis/testing, patent creation/submission, new technologies research, summary and reporting and test development/execution. May act as Project Leader (PL) or Assistant Large Project Leader (ALPL) for assigned research projects. May act as FM1 Project Leader (PL) for assigned development projects. Acts as PIC for assigned projects. Work assignments are performed within defined latitude for independent judgment, problem solving and decision making as well as defined parameters for accuracy, quality, efficiency and compliance with time schedules and applicable policies, procedures and regulations. Specific technical focus areas for the Materials Organics Group may include structural organic composites, textiles, and plastics. Key Accountabilities Conduct new material technology sensing using various methods of investigation including on-line investigation, networking with local and overseas colleagues, and collaborating with material and part suppliers to gather/analyze technological data, determine feasibility, and present findings to technical management. May act as Assistant Large Project Leader or Project Leader for assigned research projects of limited scope and complexity, overseeing/maintaining overall project schedule/budget/direction/progress including coordinating project targets with management, managing project work output of PLs and PICs, creating/updating material specifications and providing assistance or mentoring to PLs and PICs to ensure project quality/cost/specification targets are met. May act as department PL for assigned development models, primarily of limited scope and complexity such as small regulation or marketability changes, participating in project team meetings, coordinating project resources to meet deadlines, initiating/proposing technical collaboration and negotiating strategically to gain acceptance of countermeasures to proposed design modifications. As PIC for assigned research and development projects, conducts project testing & evaluation of design parts/manufacturing processes through activities including planning/executing tests, conducting failure analysis, analyzing test results, creating/revising material specifications, interfacing with design engineers to propose design changes/recommend countermeasures to ensure parts meet design specifications, and creating/presenting final reports to technical management. Coordinates new supplier qualification activities, interfacing with laboratories selected to support project research, development, and/or testing to ensure new materials/parts quality standards are met and required documents such as confidentiality agreements/PRs are created/processed. Investigates new technologies/processes for assigned special projects, including conducting market/cost benefit analysis to determine competitive advantage/feasibility and presenting concepts/findings to management for approval to test new technology/processes. Actively participates in cross-training and process improvement efforts, including continuous knowledge acquisition in area of specialty, new testing technology research and tracking material science trends. Qualifications, Experience, and Skills Bachelor's degree in related discipline (e.g. Material Science/Engineering; Mechanical Engineering; Chemical Engineering) or equivalent work experience Minimum Experience: 3 or more years of relevant experience. Other Job-Specific Skills Excellent knowledge of fundamental engineering concepts and terminology, the units of measurement, and their interrelationship common to all branches of engineering Excellent project management skills Ability to learn and advance new technologies Excellent working knowledge of Microsoft Word, Excel, and Powerpoint Must be able to maintain a high level of confidentiality. Workstyle This is an onsite job. Physical requirements: May occasionally have to move up to 50 lb for approx. 50 ft, without any assistance. Travel requirements: Approx. up to 10% annually - largely domestic Overtime: As and when needed Visa sponsorship This position is not eligible for work visa sponsorship. What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development programs Additional Offerings: Tuition Assistance & Student Loan Repayment Lifestyle Account Childcare Reimbursement Account Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

**Who We Are** Applied Materials is a global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor chips - the brains of devices we use every day. As the foundation of the global electronics industry, Applied enables the exciting technologies that literally connect our world - like AI and IoT. If you want to push the boundaries of materials science and engineering to create next generation technology, join us to deliver material innovation that changes the world. **What We Offer** Salary: $110,500.00 - $152,000.00 Location: Santa Clara,CA You'll benefit from a supportive work culture that encourages you to learn, develop, and grow your career as you take on challenges and drive innovative solutions for our customers. We empower our team to push the boundaries of what is possible-while learning every day in a supportive leading global company. Visit our Careers website to learn more. At Applied Materials, we care about the health and wellbeing of our employees. We're committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits (********************************** . General Profile: Requires knowledge and experience in own discipline; still acquiring higher-level knowledge and skills. Builds knowledge of the company, processes and customers. Solves a range of straightforward problems. Analyzes possible solutions using standard procedures. Receives a moderate level of guidance and direction. Key Responsibilities 1. Develops, applies, revises, maintains and/ or tests quality standards to ensure alignment with customer expectations. 2. Designs and implements methods and procedures for inspecting, testing and evaluating the quality of products 3. Develops, implements quality test plans and performs failure analysis. Perform FMECA, document CRAMS and work with supplier and engineer to enable crams test plan. Also perform PQP at supplier. Reliability modeling and ERAMS 4. Gathers operational and test data and evaluates results. Prepares documentation for testing. 5. Develops methods and parameters, project methodology and/ or project proposals. 6. Evaluates work methods, procedures and policies to ensure world class quality standards are attainable. 7. May be accountable for projects/ programs as wells as, developing methods and parameters, project methodology and/ or project proposals. 8. Coaches, mentor and conduct training for targeted organizations on quality & reliability process Functional Knowledge · Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities Business Expertise · Understands key business drivers; uses this understanding to accomplish own work Leadership · No supervisory responsibilities but provides informal guidance to new team members Problem Solving · Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents Impact · Impacts quality of own work and the work of others on the team; works within guidelines and policies Interpersonal Skills · Explains complex information to others in straightforward situations Education: Bachelor's Degree Experience: 2 - 4 Years **Additional Information** **Time Type:** Full time **Employee Type:** Assignee / Regular **Travel:** Yes, 10% of the Time **Relocation Eligible:** Yes The salary offered to a selected candidate will be based on multiple factors including location, hire grade, job-related knowledge, skills, experience, and with consideration of internal equity of our current team members. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation such as participation in a bonus and a stock award program, as applicable. For all sales roles, the posted salary range is the Target Total Cash (TTC) range for the role, which is the sum of base salary and target bonus amount at 100% goal achievement. Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law. In addition, Applied endeavors to make our careers site (**************************************************** accessible to all users. If you would like to contact us regarding accessibility of our website or need assistance completing the application process, please contact us via e-mail at Accommodations_****************, or by calling our HR Direct Help Line at ************, option 1, and following the prompts to speak to an HR Advisor. This contact is for accommodation requests only and cannot be used to inquire about the status of applications.

Who is Norsk Titanium? What do we do? If you haven't heard our name in passing before, you will soon. Norsk Titanium is pioneering a new era of on-demand metal additive manufacturing that will revolutionize the raw material supply chain. We are the world's first and only OEM qualified supplier of additively manufactured structural titanium components. However, our focus doesn't stop at the aerospace industry. Our unique RPD process may be applied in the defense, space, oil and gas, and industrial markets. Our team is small, but our goals are big. Norsk Titanium scientists, engineers, and employees around the world are truly responsible for the future of metal; You could be part of the next industrial revolution! What will Norsk Titanium do for you? At Norsk Titanium, we are committed to mutual growth and success. Our innovative team provides training and mentorship from global subject matter experts. We are committed to our employees: mind, body and soul. As such, we benchmark our benefits annually to ensure we offer industry leading benefits. Our compensation and benefits structure has been developed to attract the best and brightest in the industry. We offer both short-term (bonus) incentive plans and long-term (stock option) incentive plans, tuition assistance for continuing education, gym memberships, a generous 401k plan with Day 1 vesting and much more. With NTi, you aren't a number, you're a valuable team member! The Material QA Engineer, NDT II provides product quality assurance and nondestructive engineering support to commercial, engineering and operations based on OEM engineering and contractual flow down. Interprets engineering flow down based on customer digital data, drawings, parts list, customer, and industrial specifications to provide NDT (nondestructive) and DT (destructive) direction as required to realize customer compliant parts developed through RPD technology. In a typical day, your expertise: * Provides material quality assurance to Operations, Commercial and Engineering based upon NTi (Norsk Titanium) requirements established by MPF Department and nondestructive engineering support and guidance for the inspection of customer products * Supports customer discussions of NDT/DT technical differences between NTi product inspection and customer legacy inspection methods and participates in gap closure * Reviews and maintains customer NDT quality and engineering requirements to ensure NTi product is designed and developed to the necessary configuration for inspection * Creates and validates inspection techniques conforming to Technical or Customer Specifications * Provides quality assurance and nondestructive engineering support to implement new product introduction and ongoing production, including supplier approval, non-conformance investigation and corrective action * Proactively leads continuous improvement efforts to improve profitability, competitiveness, reliability, quality, safety, etc. in areas of responsibility * Assists with production implementation of NDT; evaluates and proposes products, methods, or processes related to industrialization of additive manufacturing * Adheres to and promotes applicable Policies, Procedures, Safety Rules & Regulations and Security Guidelines * Other duties and responsibilities as required for the successful operation of business This position will have access to technology and/or software source code that is subject to U.S. export controls. U.S. person as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3)) We're thrilled to find candidates with: * BS or MS in physics or engineering, preferably Physics, Engineering Physics, Aerospace or Mechanical Engineering or equivalent work experience or 2-year degree or certificate from an NDT Trade School * Experience in aerospace manufacturing, preferably in NDT evaluation * General understanding of CATIA or similar CAD software * Familiarity with various NDT methods including the complimentary nature and limitation of each method * Experience in evaluating and identifying gaps between differing NDT methods as applied to additively manufactured, or similar materials * ASNT SNT-TC-1A NDT Level II in a minimum of 1 method * Minimum 2 years of NDT experience as a Level I or II in Ultrasonics or Radiography * Demonstrated familiarity with and ability to interpret and apply Technical Specifications and Customer inspection requirements * Proficiency in Microsoft Suite of programs, i.e. Word, Excel, Power Point, Project and Visio * Fluent mastery of English language and basic understanding of Lean Manufacturing principles Other competencies critical to success include: * Proactive, self-driven and eager to learn * Ability to handle several tasks simultaneously * Good communication, collaboration, and cooperation skills * Able to work independently in a structured manner, take initiative and complete processes * Structure and accuracy in daily work * The ability to read and apply Standard Operating Procedures, Standard Work and Work Instructions * Excellent written and verbal communication skills * This position will require access to technology and/or software source code that is subject to U.S. export controls. U.S. person or ITAR licence required * Willingness to adhere to and promote the NTi values of glød, collaboration, creative curiosity, trust, respect, and integrity Physical Requirements: * The ability to sit in front of a computer for 8 or more hours daily * The ability to access and navigate each department at the organization's facilities * The ability to lift and carry objects up to 20 pounds occasionally * While performing the duties of this job, the employee is regularly required to; stand, sit, talk, hear, and use hands and fingers to feel objects, tools and controls, to operate a computer and telephone keypad * Good vision (20/20) with or without corrective devices and the ability to distinguish colors * The noise level in the work environment is usually low to moderate While the physical demands described above are generally representative of those that must be met by an employee to successfully perform the essential functions of this role, reasonable accommodations may be made to enable individuals with disabilities to perform the functions. Anticipated Hiring Timeline: Immediately Relocation: Unavailable Remote Work: Unavailable (Our magic happens onsite!)| Sponsorship: Unavailable (This position will have access to technology and/or software source code that is subject to U.S. export controls. U.S. person as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3)) Norsk Titanium is proud to be an equal opportunity employer. We celebrate diversity of opinion and are committed to creating an inclusive workplace where all qualified applicants and Employees are treated with respect and fairness. Employment decisions are made without regard to race, color, religion, sex, gender, gender identity, gender expression, sexual orientation, pregnancy, national origin, age, disability, medical condition, genetic information, marital status, military or veteran status, status as a victim of domestic violence, or any other protected characteristic under applicable law. The Know Your Rights poster is available here: "Know Your Rights: Workplace Discrimination is Illegal" Poster The pay transparency policy is available here: Pay Transparency Nondiscrimination Poster-Formatted Not ready to apply? Submit your information for future consideration here: ************************* All offers of employment are subject to favorable results of a criminal background screen, verification of previous employment and references. Additional screening may take place as required by the role and in accordance with state and federal laws. All candidates are subjected to a drug-screen for illegal substances in conjunction with an acceptance of employment. Failure to participate may result in revocation of an offer of employment.

The Role The Manufacturing Engineer is responsible for developing automated solutions, implementing new processes, optimizing existing processes, automated data collection, and executing the industrial control and programming strategy for GTI's production facilities. This position will work closely with the multiple teams to ensure flawless and quick speed to market. Success is gauged on the ability to deliver quality, detailed, and efficient solutions at scale. The Manufacturing Engineer will play a pivotal strategic role in priority projects from a feasibility standpoint through a full IQ, OQ, PQ validation and hand-off with a technical transfer to the site production team. They work collaboratively with multiple teams to deliver productivity improvements and Continuous Improvement. Responsibilities 50% travel required Coordinate the efforts of Engineering and technical resources based on Senior Leadership Priorities and Site 90-day plan priorities. Work with other departments (i.e. Prod Development, Project Management, Quality, Compliance, Operations, etc.) to integrate new systems. Dedicate start-up management support for selected complex project integrations. Ensures constant updates are provided to the VP of Manufacturing on the status of projects and improvement efforts in the facilities. SME for automated packaging equipment, flow wrappers, beverage line, multi-combi scales, bag filling equipment, integrations, and automation. Conduct studies, identify problems, recommend alternatives, and implement solutions in coordination with other teams. Develop and deploy automated solutions for numerous processes to gain efficiency and streamline workflows. Provide support to Start-up facilities via technical transfer: Staffing Equipment layout and requirements Construction hand off Regulatory engagement Best-practice processes Technical transfer related to equipment Work with integrators, contractors, and site personnel to bring new functionality online and to troubleshoot issues as they arise. Work with site maintenance and facilities personnel to develop and execute preventative maintenance plans. Maintain up to date as-built records and drawings for existing and new deployments. Integrate existing equipment with live data stream to dashboard with historian, report generation, alarms, notifications, and live visuals for site teams to track daily production. Other duties as assigned Qualifications Bachelor's degree in engineering and 5+ years Operations and Engineering experience in a manufacturing environment. Proven strategic experience in overseeing all aspects of large-scale manufacturing projects Knowledgeable of TPM-based continuous improvement methodology Knowledgeable of Engineering problem solving Able to diagnose complex technical systems and develop simple human-machine interface and training solutions for optimal operations. Experience in industrial networking/automation (SCADA-Ignition, ITOT, cyber security), controls experience (PLC - AB, Omron, Schneider, ladder logic \ STX), business and data analytics for manufacturing operations (Power Bi, Tableau,) vision systems, and robotics. Highly motivated, self-directed, innovative and able to work independently or among teams with keen judgement, common sense and resourcefulness Adapts and thrives in a demanding, start-up, fast-paced environment Possesses a high level of critical thinking Effective time-management skills and ability to multi-task Ability to work well with others while also completing individually assigned tasks. Operates with a high level of professionalism and integrity, including dealing with confidential information Must understand and comply with the rules, regulations, policies, and procedures of GTI Must have a solid understanding of the Medical Marijuana laws, rules and regulations set forth by the state; a pursuit to further their understanding and knowledge of the industry and the laws. Safety and Compliance Be aware of hazards in the workspace. Retain and understand department specific training. Report safety incidents/ concerns and comply with follow-up actions. Be compliant with area safety requirements, state regulations and PPE requirements. Follow GMP, biosecurity, sanitation or other quality and compliance requirements. Perform record keeping accurately and completely as directed by a lead or supervisor. Maintain and calibrate tools, equipment and machinery as directed by a lead or supervisor. Report and escalate safety & quality concerns. Working Conditions While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions. Must be able to sit and/or stand for extended periods of time while maintaining focus. Must be able to lift, carry, and balance up to 50 pounds (and up to 100 pounds with assistance) AND must be able to do so with extreme care and caution when working with product. Ability to work in a fast-paced, changing, and challenging environment Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil). Additional Requirements Must pass any and all required background checks Must be and remain compliant with all legal or company regulations for working in the industry Must possess valid driver's license Must be a minimum of 21 years of age Must be approved by state badging agency to work in cannabis industry The pay range is competitive and based on experience, qualifications, and/or location of the role. Positions may be eligible for a discretionary annual incentive program driven by organization and individual performance. Green Thumb Pay Range$90,000-$110,000 USD

Job Description If you're a strategic problem solver with a talent for making data-informed decisions, you could be a great fit for this full-time Industrial Process Engineer role with Quality Pork Processors! We need a meticulous and analytical person to help refine the daily processes at our Austin, MN company. THIS IS NOT A REMOTE POSITION. YOU MUST BE ABLE TO WORK FULL-TIME ON-SITE IN AUSTIN, MN. Not only do you earn a competitive salary of $70,000 - $90,000/year (based on experience), but you also receive these excellent benefits: Medical, dental, vision, and life insurance Paid vacation and 9 paid holidays effective immediately A 401(k) with matching A free onsite medical clinic Elevate your career and make a direct positive impact on our thriving business as an Industrial Process Engineer! Location Requirement: Candidates must currently reside in or near the Midwest or be willing to relocate to Austin, MN. This is an on-site position, and applicants must be legally authorized to work in the United States. Remote work or international living arrangements will not be considered. WHAT WE'RE LOOKING FOR Candidates must currently reside in or near the Midwest or be willing to relocate to Austin, MN. This is an on-site position, and applicants must be legally authorized to work in the United States Bachelor's degree in an engineering field such as industrial, mechanical, manufacturing, or civil Relevant engineering work or internship experience Ability to use calculus, trigonometry, algebra, and other types of math to perform basic and advanced calculations determining process productivity Excellent verbal and written communication skills with the ability to explain technical recommendations in layman's terms Strong leadership and interpersonal skills Flexible problem-solving skills Analytical skills with the ability to accurately evaluate and interpret data WHAT IT'S LIKE BEING AN INDUSTRIAL PROCESS ENGINEER As a vital member of our engineering team, you're responsible for analyzing our current manufacturing processes and implementing new strategies for improving efficiency while cutting costs and minimizing waste. You're motivated to optimize our production procedures, and you achieve this by managing schedules, enforcing quality control measures, and identifying areas for improvement in our manufacturing processes. Utilizing your math knowledge and project management skills, you evaluate data and develop ways to enhance our efficiency. Diligently, you coordinate services, examine employee responsibilities, and identify innovative tools or procedures to boost production. Attention to detail is crucial as you analyze data, design new control systems, and prepare documentation such as material lists, cost analyses, cost estimations, and purchase orders. You're pivotal to our continued success and future growth! ABOUT US Founded in 1989, we are a privately held meat processing company. Our mission is to safely process quality products as our team grows, protects, and represents our company values. With a workforce of over 1,300 people, we work hard to follow that mission. We are proud to have a very diverse staff. With one of the best safety records in the industry, we put the safety of our people first. As an organization, we strive to take good care of our people and provide them with a great place to work! Are you ready to tackle interesting challenges and put your problem-solving skills to the test? Don't miss out - apply today with our short initial application! Job Posted by ApplicantPro

Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies. With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products. Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth. Summary: The Cement Additives Process Engineer plays a pivotal role in driving business growth and profitability through strategic technical support and contribution to the sales process. This position is tasked with providing technical support and expertise of the cement manufacturing process to our cement additive sales team and customers. Proficiency in this role requires exceptional cement manufacturing, analytical, and communication skills to collaborate seamlessly with internal teams at Euclid Chemical and build strong, lasting relationships with external cement customers - both active and potential customers. This is a remote position, with Euclid Chemical's main campus located in Ceveland, OH. Responsibilities: Serve as a technical ambassador for the Euclid Chemical cement additive sales team. Subject matter expert to provide feedback and troubleshooting information for customers. Act as a technical expert on the latest cement manufacturing technologies, equipment, and best practices to maintain Euclid Chemical's competitive edge. Deliver customer support through industrial trials, mill audits, special projects, data analysis, and detailed reporting to retain existing customers and attract new ones Compile and analyze industrial trial process data, and prepare detailed reports providing conclusions and action items from industrial trial runs. Keep thorough and updated records of activity history with active and potential cement additive customers. Design and execution of plant industrial trials and mill audits. Maintenance and operation of portable pump equipment inventory to utilize during industrial trials. Collaborate with the Cement Additives Technical Manager and Cement Lab Manager to develop new products and enhance existing lines based on market trends, competitive analysis, and industrial trial results. Work collaboratively with Euclid Chemical Cement Additives Lab team in the development and improvement of laboratory ball mill methodologies for testing materials. Education and Experience: Bachelor's degree in engineering (chemical or mechanical) or chemistry - master's degree is preferred. Minimum of 5-7 years of experience in cement manufacturing process control or quality management. Skills and Qualifications: Advanced knowledge and understanding of cement manufacturing, cement chemistry, and raw and finish mill circuit operation. Basic understanding of cement additives chemistries. Ability to interpret lab outputs (e.g., XRD, clinker microscopy, isothermal calorimetry, and physical test results) to develop customer-specific strategies and product recommendations. Proficiency with cement standards (ASTM, CSA, etc.). Strong knowledge of milling equipment, particle classifiers, circuit configurations, and pyro processes for optimizing clinker performance. Advanced knowledge of MS Office computer software: Excel, PowerPoint, Word. Basic knowledge of MS Outlook, Teams, Edge Internet Browser. Knowledge of industry trends, including low clinker content cement production and co-grinding with alternative materials. Data analysis and report writing skills. Communication and interpersonal skills. Leadership and team management capabilities. Analytical and problem-solving abilities. The ability to design and execute plant industrial trials and mill audits. Travel: Willingness to travel as needed for customer meetings and plant industrial trials (up to 50%). Why join our team? Euclid Chemical offers an attractive package for personnel, company benefits include but are not limited to: Medical, Dental and Vision coverage Life Insurance Short Term/Long Term Disability Parental Leave 401k with company match Defined benefit pension plan Vacation and holiday time A company vehicle or car allowance Salary Range: $110,000 - $125,000 plus annual company bonus program Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.

At Kovalus Separation Solutions (KSS) , we are committed to revolutionizing the separation industry through advanced technologies such as membrane filtration, ion exchange, evaporation, drying, and more. Our innovative solutions empower customers across the food & beverage, dairy, life sciences, and industrial markets to optimize production processes through concentration, purification, and contaminant removal. We also support clients in recycling valuable process chemicals, achieving high-purity water, and treating wastewater for reuse or safe discharge, helping them enhance sustainability. Our success is built on the collaborative efforts of our global team of dedicated professionals. As we continue to grow, we seek talented individuals who share our passion for innovation. Join us today and help deliver Separation Technologies for a Better Future™ . How You'll Add Value… As a Process Engineer for the Food, Dairy and Beverages Markets you will be instrumental in driving our growth in the sanitary industrial markets. Your technical expertise, ability to build strategic partnerships, and internal collaboration will contribute significantly to Kovalus' continued success. What you'll do… Position Information Based in our headquarters in Wilmington, Massachusetts, reporting to the Sr. Director of Process Engineering. Flexible work environment (3 days in the office, 2 days WFH) Remote position can be considered for the right candidate. Compensation Range: $75k-$92,800K Key Responsibilities Develop detailed process design work for commercial membrane separation processes using Spiral wound, Hollow fiber and tubular configurations and MF, UF, NF and RO technology. This will involve the design and specification of filtration systems, selection of the treatment conditions, development of P&IDs, controls philosophies and control sequences. Participate in on-site commissioning of commercial plants and assisting in training of the end user's operators. Develop test protocols for field pilots for the purpose of obtaining performance data for commercial opportunities, and draft pilot reports. What you'll bring… Required Qualifications Minimum of 2 years of experience in process engineering design, with a focus on food, dairy or beverage applications. Ability to travel up to 40% at times (average 25%) within North America, working closely with regional sales teams and product management. At least 1 year experience with use of spiral wound membranes in industrial applications, including food & beverage, and life science facilities. Bachelor's degree in chemical engineering , or food technology , or in another related discipline. This position is not eligible for sponsorship Preferred Qualifications 5 or more years of experience working with membrane system design and operation, with primary focus of Food, dairy or beverages filtration. Hands on experience working on the startup and troubleshooting of full-scale commercial membrane filtration systems. Desire to be an innovator and major contributor in delivering cutting edge separation solutions to our customers. Excellent verbal and written communication skills, with demonstrated experience in customer service, presentations, and relationship-building. Kovalus offers a comprehensive package that includes: Medical (4 plan options), Dental (2 plan options) and Vision insurances; 401K (match & fixed company contribution); health savings and flexible spending accounts; company provided basic life insurance policy with the option of selecting additional voluntary life insurance for self, spouse or dependents; disability insurances (short-term policy is company paid & long-term is split between company and employee); voluntary insurance plans for accident, critical illness and hospital indemnity; business and personal travel insurance; 10 paid holidays; vacation time; sick time; employee assistance program; educational assistance program; referral bonus; bereavement leave. All benefits are subject to applicable plan and program terms (including eligibility terms) and may be subject to change. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

at Samtec, Inc Founded in 1976, Samtec is a leading global manufacturer of electronic interconnect solutions, generating $950 million in annual revenue. Our extensive product portfolio includes High-Speed Board-to-Board, High-Speed Cables, Optics for Mid-Board and Panel, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers drive innovation to optimize system performance and cost across all interconnect points, supported by a presence in 40+ international locations and products distributed in over 125 countries, ensuring exceptional customer service worldwide. Summary/Objective The Plating Process Development Engineer is responsible for research, development, and the integration of new plating/coating technology into Samtec production processes related to electrochemistry, plating, and other advanced/novel materials. This position will work closely with The New Ventures, Material Innovation, and Plating Process Engineering Groups to onboard new plating/coating technology.Essential Functions/ Responsibilities. Design and execute experiments related to novel materials and manufacturing processes in electrochemical deposition. Characterize deposited microstructures and coordinate internal/external analytical laboratory projects and efforts. Execute laboratory projects for the Materials Innovations Group and the Plating Process Engineering Teams. Support the research, development and implementation of new materials/technologies and the troubleshooting of plating quality issues. Work with chemical and equipment suppliers to introduce new plating processes and analysis methods. Integrate/transition novel plating technologies into Samtec's production processes and products. Facilitate new plating technologies through product testing and production processes qualifications. Maintain lab procedure documents, ensuring they are updated, meeting all requirements for safety and environmental standards. The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities. Required Experience and Education 10+ years experience in electro-plating, electrolytic plating, or any similar process concerning surface coatings. Scanning electron microscope, x-ray diffraction, elemental and chemical spectroscopic experience. Essential functions of the job include the ability to stand, lift, and walk on a continual basis. Experience in Reel-to-Reel plating / Strip Line plating is required. Must be willing to work in a chemical environment. Must be able to work with heavy drums of chemicals with a drum dolly. Facilitate new plating technologies through product testing and production processes qualifications. Must be a self-starter with strong teamwork skills. Must be able to work independently and learn quickly. Good communication skills both written and verbal. Preferred Experience and Education Bachelor's Degree in Chemistry, Chemical Engineering, Material Science or equivalent Training in Lean manufacturing, Continuous Improvement, Statistical Process Control, and Six Sigma Experience in the operation and maintenance of analytical equipment. Experience can supplement or replace educational preferences/requirements. SAMTEC, Inc. is an Equal Opportunity Employer and committed to creating a diverse environment. All employment decisions at Samtec are based in business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, pregnancy or parental status, age, disability, sexual orientation, gender and/or gender identity/expression, marital status, past or present military service, family medical history or genetic information, or any other status protected by applicable laws. Privacy Policy: *****************************************************

Descripción Puesto en Samtec, Inc Founded in 1976, Samtec is a leading global manufacturer of electronic interconnect solutions, generating $950 million in annual revenue. Our extensive product portfolio includes High-Speed Board-to-Board, High-Speed Cables, Optics for Mid-Board and Panel, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers drive innovation to optimize system performance and cost across all interconnect points, supported by a presence in 40+ international locations and products distributed in over 125 countries, ensuring exceptional customer service worldwide. Summary/Objective The Plating Process Development Engineer is responsible for research, development, and the integration of new plating/coating technology into Samtec production processes related to electrochemistry, plating, and other advanced/novel materials. This position will work closely with The New Ventures, Material Innovation, and Plating Process Engineering Groups to onboard new plating/coating technology.Essential Functions/ Responsibilities. Design and execute experiments related to novel materials and manufacturing processes in electrochemical deposition. Characterize deposited microstructures and coordinate internal/external analytical laboratory projects and efforts. Execute laboratory projects for the Materials Innovations Group and the Plating Process Engineering Teams. Support the research, development and implementation of new materials/technologies and the troubleshooting of plating quality issues. Work with chemical and equipment suppliers to introduce new plating processes and analysis methods. Integrate/transition novel plating technologies into Samtec's production processes and products. Facilitate new plating technologies through product testing and production processes qualifications. Maintain lab procedure documents, ensuring they are updated, meeting all requirements for safety and environmental standards. The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities. Required Experience and Education 10+ years experience in electro-plating, electrolytic plating, or any similar process concerning surface coatings. Scanning electron microscope, x-ray diffraction, elemental and chemical spectroscopic experience. Essential functions of the job include the ability to stand, lift, and walk on a continual basis. Experience in Reel-to-Reel plating / Strip Line plating is required. Must be willing to work in a chemical environment. Must be able to work with heavy drums of chemicals with a drum dolly. Facilitate new plating technologies through product testing and production processes qualifications. Must be a self-starter with strong teamwork skills. Must be able to work independently and learn quickly. Good communication skills both written and verbal. Preferred Experience and Education Bachelor's Degree in Chemistry, Chemical Engineering, Material Science or equivalent Training in Lean manufacturing, Continuous Improvement, Statistical Process Control, and Six Sigma Experience in the operation and maintenance of analytical equipment. Experience can supplement or replace educational preferences/requirements.

The Manufacturing Engineer I is responsible for developing, designing, implementing and managing tooling, processes and procedures. This position will train all personnel on improvements or implementation of tooling, processes and procedures. This position is responsible for managing one or more projects that may include large capital expenditures or cost saving initiatives that positively impact safety, maintenance, quality, on time delivery (OTD), efficiency and inventory. The Manufacturing Engineer will support manufacturing for all types of continuous improvement activities and may also participate on or co-lead continuous improvement events. This position will also assist in the execution of Engineered to Order (ETO) sold projects as they are shared between design and manufacturing processes. Essential Job Functions * Design, justify, implement and manage capital projects including machine and fixturing purchases, shop floor layout designs, material handling equipment, product troubleshooting, etc. * Develop training materials and train all personnel on improved or new tooling, machines, processes and procedures. * Create and execute improvements to achieve goals established in Key Performance Indicators (KPIs). * Utilize scorecard performance and key metrics to prioritize efforts on tasks and projects. * Use real-time problem-solving tools to implement root cause solutions surrounding safety, quality, OTD, productivity, efficiency, cost savings, etc. * Support new product development and ETO projects ensuring successful manufacturability. * Implement and maintain 5S and housekeeping efforts throughout manufacturing and in collaboration with direct personnel. * Collaborate with the hourly production coworkers to improve their daily work as needed or required. * Collaborate and build relationship with Planners and Engineering to maintain routers in JDE to support accurate costing and profitability. * Collaborate and build relationships with other professional disciplines throughout the business on technical inquiries and needs. * Collaborate and build relationships with sales and marketing to develop new product offerings in a research and development capacity. * Provide training and guidance to other Manufacturing Engineering Technicians as needed. * Leverage knowledge of Manufacturing Engineer II in regards to design methodology, skills, and tools. * Travel including international, could be up to 15% as required by the project or other needs. * Must have a valid driver's license * Regular, in-person attendance due to necessary teamwork and personal interactive nature of this position * The ability to work in a constant state of alertness and safe manner. Knowledge, Skills, Abilities (Competencies) * Metal forming, welding, grinding, machining, manufacturing, including general CAM and/or layout experience. * Must have a thorough understanding of drafting and knowledge of engineering principals and techniques including various sheet metal fabrication processes and installation procedures * Knowledge of Lean manufacturing knowledge or related concepts. * Ability to work well under pressure and manage time effectively in a constantly changing and time sensitive environment while prioritizing multiple tasks in parallel. * Excellent communication skills both orally and written with keen attention to detail. * Ability to take initiative to develop new strategies and outside-the-box ideas. * Self-starter and goal oriented who will aggressively pursue successful resolution of safety risks in a timely manner. * Ability to work independently or collaboratively with a team. * Ability to establish and maintain working relationships with individuals at all levels of the organization. * Strong interpersonal skills with a mechanical aptitude. * Ability to efficiently utilize Microsoft Office. AutoCAD experience required. Education and Experience * Bachelor of Science in Engineering or similar degree program is required. One (1) to three (3) years related experience preferred. Base Compensation Range: $59,159 - $88,739 annually Variable Compensation Range: Incentive bonus eligibility up to 10% of gross annual salary base on company performance (as of 2024). Health and Ancillary Benefit Overview: * Medical, Dental & Vision Insurance with low employee premiums * Free off-site medical clinic * Company paid Life Insurance & Short-Term Disability * 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more * Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades * Paid Time Off and Sick, Family & Parental Paid Time Off * Ten (10) Paid Holidays * Four-day work weeks, varied shifts, and flexible remote work options depending on position * Career progression program for advancement * Free in-house welding, grinding & machine operation school * In-house training program Professional office environment with some time spent in a manufacturing shop. Use of standard office equipment (computers, phones, copiers, and filing cabinets, etc.). Frequent presence on the manufacturing floor as well as field operations. Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures.

Vertiv is hiring a Product Quality Engineer in Delaware, OH who will be responsible for ensuring quality across the full lifecycle of datacenter appliances and systems, with a dual focus on New Product Introduction (NPI) and Engineer-to-Order (ETO) project support. This role leads advanced quality planning activities, defines product release criteria, and ensures compliance with internal quality standards and customer requirements from development through post-launch. The engineer acts as the key quality interface between cross-functional teams-Engineering, Operations, Service, and external suppliers-and supports both proactive quality planning and reactive issue resolution. Responsibilities include managing quality documentation (e.g., FMEAs, control plans, PPAPs), conducting root cause analysis, implementing corrective/preventive actions, and coordinating on-site quality support when necessary. The role also captures and analyzes Voice of the Customer data to drive continuous improvement and enhance long-term product reliability and performance. Key Responsibilities * New Product Development introduction (NPDi) Quality * Lead Advanced Product Quality Planning (APQP) activities from concept through production launch. * Develop and own the Quality Assurance Plan, defining release criteria, KPIs, and metrics. * Support Contract Manufacturer (CM) selection and lead qualification activities. * Collaborate with Engineering and Operations to create and approve quality control documents: * PFMEA, Control Plans, Process Capability, Work Instructions, etc. * Perform Product-level PPAP assessment and provide final approval for release readiness. * Assess and validate product Launch Readiness for both internal and external manufacturing partners. * Post-Launch & Sustaining Quality * Lead cross-functional issue triage and resolution activities for customer-reported concerns. * Drive root cause analysis (RCA) and implement corrective and preventive actions (CAPA). * Maintain real-time issue tracking and drive closure of systemic quality issues. * Provide feedback to design and manufacturing teams to enable continuous improvement. * Voice of the Customer (VoC) * Aggregate and analyze VoC data from multiple sources: * Warranty claims, service reports, customer complaints, surveys, etc. * Conduct issue trending and risk analysis to identify areas of improvement. * Lead corrective action projects to resolve systemic issues in product design or process. * Influence design changes by embedding lessons learned from field and manufacturing feedback. Required Qualifications * Bachelor's Degree in Engineering, Computer Science, or related technical field. * 5-7 years of experience in a product quality, reliability engineering, or NPDi role. * Proven experience in datacenter devices or similar high-reliability, high-complexity products. Knowledge, Skills & Abilities * Strong understanding of electrical, mechanical, and software/firmware systems. * In-depth knowledge of: * Design and manufacturing process controls. * Reliability test methods and life estimation modeling. * Supplier and production qualification processes. * Proficient in quality tools and methodologies such as FMEA, PPAP, 8D, CAPA, and Root Cause Analysis. * Analytical thinker with excellent problem-solving and data interpretation skills. * Highly organized with the ability to manage multiple priorities and meet deadlines. * Excellent written and verbal communication skills across all levels of the organization. Core Competencies * Collaborative Mindset: Proven ability to build strong working relationships and effectively collaborate with cross-functional and global teams. * Results-Driven: Demonstrates a high sense of urgency and commitment to delivering high-quality outcomes and project milestones. * Analytical Problem Solving: Strong root cause analysis skills with the ability to develop and implement effective, data-driven corrective actions. * Customer Advocacy: Consistently represents the Voice of the Customer, ensuring customer needs and feedback are integrated throughout the product lifecycle. * Quality Leadership: Takes ownership of quality deliverables and drives accountability across the organization to uphold standards and processes. * Self-Motivated & Independent: Able to work independently with minimal supervision while contributing actively as part of a team. * Effective Communication: Excellent verbal and written communication skills in English; ability to clearly convey technical issues and influence stakeholders. * Interpersonal Effectiveness: Professional and approachable demeanor with strong interpersonal skills to foster trust and engagement across departments. * Attention to Detail: Maintains a strong focus on accuracy, completeness, and quality in documentation, analysis, and reporting. * Proactive & Energetic: Demonstrates initiative and enthusiasm for solving problems and driving continuous improvement efforts. * Audit & Compliance Knowledge: Experience conducting internal or supplier audits; formal auditor certification is advantageous. * Quality Systems & Standards: Familiarity with ISO 9001, ISO 14001, and ISO 45001 standards; working knowledge of quality management systems is highly desirable. * Continuous Improvement: Lean or Six Sigma certification is a plus; actively contributes to process improvement initiatives. * Influence Without Authority: Strong ability to lead cross-functional initiatives and drive change through influence rather than direct control. * Adaptability & Flexibility: Thrives in a dynamic, fast-paced environment and demonstrates readiness to embrace new challenges and evolving priorities. Working Conditions * Standard office environment with extensive use of computers. * Domestic & international travel may be required (up to 25%). * May require extended hours to meet critical deadlines. * Ability to work in a dynamic, fast-paced environment with evolving priorities. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES * Customer Focus * Operational Excellence * High-Performance Culture * Innovation * Financial Strength OUR BEHAVIORS * Own It * Act With Urgency * Foster a Customer-First Mindset * Think Big and Execute * Lead by Example * Drive Continuous Improvement * Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With more than 30,000 people worldwide and nearly $8 billion in revenue, a strong customer base and global reach in nearly 130 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to **********************. If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #LI-MS1

Our Company PharMerica PharMerica is are seeking a seasoned Process Engineer with a strong background in pharmacy operations to drive continuous improvement and operational excellence across our pharmacy services. The ideal candidate will have 3-5 years of hands-on experience in process engineering. Experience working in a Long-Term Care (LTC) pharmacy environment is a plus. This role requires a strategic thinker with a passion for optimizing workflows, leveraging automation, and integrating emerging technologies such as Generative AI (GenAI), Large Language Models (LLMs), and Agentic AI. Remote opportunity. Applicants can live anywhere within the Continental USA. Travel: 25-50% Schedule: Monday - Friday, 8:00am - 5:00pm We offer: DailyPay Flexible schedules Competitive pay Shift differential Health, dental, vision and life insurance benefits Company paid STD and LTD Tuition Assistance Employee Discount Program 401k Paid-time off Tuition reimbursement Non-retail/Closed-door environment This position will be posted a minimum of 5 days Responsibilities Analyze existing pharmacy workflows and identify opportunities for standardization, process improvement, automation, and cost reduction Develop and maintain process maps, SOPs, and documentation to support operational consistency and compliance Lead Lean and Six Sigma initiatives to enhance efficiency, reduce waste, and improve service quality Collaborate with cross-functional teams including IT, operations, and clinical staff to implement innovative solutions Evaluate and integrate AI technologies (GenAI, LLMs, Agentic AI) to streamline decision-making, documentation, and customer service processes Monitor performance metrics and KPIs to assess the impact of process changes and drive data-informed decisions Support change management efforts and training programs to ensure successful adoption of new processes and technologies Qualifications Required Qualifications: Bachelor's degree in Engineering, Industrial Engineering, Pharmacy, or related field. 3-5 years of experience in process engineering, preferably in a pharmacy or healthcare setting. Proven expertise in Lean, Six Sigma, or other continuous improvement methodologies (Green Belt or higher preferred). Proficiency in process mapping tools (e.g., Visio, Lucidchart) and data analysis platforms (e.g., Excel, Power BI). Familiarity with automation technologies, GenAI, LLMs, and Agentic AI applications in operational settings. Strong analytical, problem-solving, and project management skills. Excellent communication and stakeholder engagement abilities. Preferred Qualifications: Experience in Long-Term Care (LTC) pharmacy operations. Exposure to regulatory compliance in pharmacy or healthcare environments. Experience with digital transformation initiatives or AI implementation in operational workflows. Key Competencies Strategic Thinking Innovation & Technology Adoption Process Optimization Cross-functional Collaboration Data-Driven Decision Making Change Management Travel Requirements: 25-50% travel About our Line of Business PharMerica, an affiliate of BrightSpring Health Services, is a full-service pharmacy solution providing value beyond medication. PharMerica is the long-term care pharmacy services provider of choice for senior living communities, skilled nursing facilities, public health organizations, and post-acute care organizations. PharMerica is one of the nation's largest pharmacy companies, offering unmatched company culture, employee development, and advancement opportunities. For more information, please visit ******************* Follow us on Facebook, LinkedIn, and X.

OPPORTUNITY For a motivated engineer with a passion for the food & beverage industry to provide design services for clients throughout North America. Join an integrated team of architects, engineers and project managers and engage in challenging projects up to $500 million for many of the biggest brands in the industry. This key role will execute a broad set of engineering competencies, food processing knowledge and problem-solving skills as well as provide mentorship to others in an environment that values collaboration. POSITION Reports directly to the VP/Manager of Process Engineering. Participates on design teams with an emphasis on food manufacturing and processing equipment, process equipment layout and sanitation/CIP systems. Projects range from master planning exercises to conceptual & detailed design, and finish with startup & commissioning. This position will proactively interact with the client, vendors, contractors and Hixson's architecture and engineering teams. CANDIDATE 10+ years of experience in process engineering and design in food & beverage, nutraceutical, or related industries B.S. in chemical or food engineering; P.E. a plus Proven ability to develop BFDs, PFDs and P&IDs Experience leading HAZOPs and FMEAs Proficient in design and specification of process systems and equipment Competence in AutoCAD and process simulation software Strong interpersonal skills to work effectively with clients and associates COMPANY Located at the base of historic Mt. Adams, Hixson Architecture, Engineering, Interiors was formed in 1948 and is consistently listed as one of the top A/E firms in the United States. Fostering a culture that is different by design, Hixson manages by values, not by business objectives, and believes that by taking care of its associates, success follows. Add to this a prioritization of professional development, community service and living a balanced life, it all makes for a great place to work. To learn more about life at Hixson, please visit ******************* COMPENSATION Commensurate with experience, plus excellent benefits package: comprehensive health insurance, life insurance, paid time off, paid parental leave, 401K match, profit sharing, end-of-year bonus plan, remote work flexibility, tuition reimbursement, on-site fitness center, free parking and more.

Job Description Construction Materials Engineer . Are you a Construction Materials Engineer seeking a challenging opportunity to grow your career with a firm committed to our employees and providing high-quality service to our clients? S&ME is looking for an eager and dedicated full-time Construction Materials Engineer to join our Construction Services team in Columbus, Ohio. At S&ME, we have a history of delivering innovative geotechnical, civil, environmental, and construction material testing for over 50 years. Over the decades, we have grown into a trusted partner for clients across various industries, including transportation, energy, water, waste management, education, government, commercial, industrial, and more. Our commitment to technical excellence and integrity has established us as a leader in our field. .Why Work at S&ME? Professional Growth: We believe in providing continuous learning opportunities, mentorship programs, and a supportive work environment. Let us tell you more about that! Innovative Projects: Join a team that works on diverse and challenging projects of all sizes and complexities, including but not limited to airports, solar farms, power plants, schools, trails, mixed-use, sports stadiums, dams, museums, and more. Inclusive Culture: Our culture is built on collaboration and mutual respect. We want you to want to come into the office to build relationships, laugh together, learn from each other, and enjoy the time with your teammates and colleagues. Work-Life Balance: We believe in a flexible working environment, allowing you and your manager to determine how you can work most effectively and collaboratively to meet your client, team, and personal commitments. Community Impact: Our work creates lasting, positive impacts on the communities we serve. We pride ourselves on our technical excellence, quality work and client satisfaction to continue making a difference. .About The Role: The Construction Materials Engineer role involves leading field inspection and laboratory testing operations on geotechnical and construction projects. You'll ensure regulatory compliance and quality standards while providing mentorship to field staff and strengthening client relationships. Project Oversight: Supervise geotechnical and materials testing projects from planning through final reporting. Client Collaboration: Engage with clients to understand project goals and provide tailored solutions. Team Leadership: Mentor and lead field staff while promoting a strong safety culture. Coordination: Work closely with lab and field teams to ensure timely and high-quality project execution. Business Development: Contribute to market growth through client relationships and technical excellence. .About You: You have a Bachelor's degree in Civil, Geotechnical Engineering, or a closely related field. You have a minimum of 5 years of experience in construction inspections, geotechnical services, or special inspections. You have or can obtain a Professional Engineer (PE) license within six months of hire. You have a solid understanding of ASTM, AASHTO, DOT standards, and IBC Special Inspections. You are willing to work in field conditions and can safely handle equipment and lift up to 50 lbs. .Grow With Us: At S&ME, your career growth matters. You'll receive professional training, work on exciting projects, and be part of a company that truly invests in its people. This is more than a job; it's a chance to build a long-term career in the engineering and construction industry. S&ME provides a comprehensive benefits package to support you and your family, as well as career development resources. Come grow and thrive with us at S&ME! Medical, Dental & Vision Plans with HSA and FSA options 100% Employee Stock Ownership Plan (ESOP) 401K with Company Matching PTO with Rollover Maternity/Paternity Leave Employee Recognition Program Credential Incentive Program Tuition Reimbursement Company Vehicle with Fuel Card for Project-Based Work $2,000 Referral Bonuses & More! .Join us at S&ME! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

Are you ready to see your future take flight? At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. You'll be part of a team that embraces your drive, your curiosity, and your unique ideas and perspectives. Most importantly, you'll share in our pride and purpose that affects the lives of millions around the world! The Supplier Quality Engineer will drive quality for assigned suppliers, including quality plan implementation, & selecting suppliers through qualification processes. They will own supplier results, drive improvements utilizing supplier scorecards. Own supplier audits, ensuring compliance, and driving improvement plans where needed. Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market. **Job Description** **Roles and Responsibilities** + Supplier Quality Assurance and Supplier Quality Development + Lead supplier qualifications, action plans, audits, performance monitoring, and assisting key suppliers towards industrial standards of excellence + Track metrics & works quality improvement plans to address problem areas + Review and approve quality plans, investigate quality escapes to provide root cause analysis and ensure effective corrective actions are taken + Mentor suppliers in the application of quality tools & requirements + Ensure compliance, and drive improvement plans where needed + Review documentation and witness supplier practices to determine if sound + Ensuring manufacturing and inspection principles are in place. + **Travel required up to 30-40%.** **Required Qualifications** + Bachelor's degree from an accredited university or college (or a high school diploma / GED with a minimum of 4 years of experience in Quality, Manufacturing, Shop Operations, Materials or Sourcing) + A minimum of 3 years' experience in Quality, Manufacturing, Shop Operations, Materials or Sourcing **Desired Characteristics** + Working knowledge of investment casting product or process engineering + Experience with part drawings and Geometrical Dimensioning and Tolerancing + Basic understanding of Quality Management System (policies, procedures, and support tools / systems) + Solid understanding of geometric dimensioning and tolerancing + Demonstrated ability to analyze and resolve problems + Lean Six Sigma trained + Demonstrated ability to lead and support multiple projects simultaneously + Ability to influence others and lead small teams + Humble: respectful, receptive, agile, eager to learn + Transparent: shares critical information, speaks with candor, contributes constructively + Focused: quick learner, strategically prioritizes work, committed + Leadership ability: strong communicator, decision-maker, collaborative + Problem solver: analytical-minded, challenges existing processes, critical thinker + Demonstrated alloy powder manufacturing knowledge and experience is advantageous to the role + Demonstrated isothermal forging process knowledge and experience is advantageous to the role GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. The base pay range for this position is 100,000.00 - 120,000.00. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on **November 30th, 2025.** _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Continental develops pioneering technologies and services for sustainable and connected mobility of people and their goods. Founded in 1871, the technology company offers safe, efficient, intelligent and affordable solutions for vehicles, machines, traffic and transportation. In 2020, Continental generated sales of 37.7 billion and currently employs more than 192,000 people in 58 countries and markets. On October 8, 2021, the company celebrated its 150th anniversary. The ContiTech business area focuses on smart and sustainable solutions beyond rubber and develops digital and intelligent solutions in future-oriented sectors. In doing so, ContiTech draws on its long-standing knowledge of the industry and materials to open up new business opportunities by combining various materials with electronic components and individual services. The products, systems and solutions developed by ContiTech are used both in the automotive industry as well as in railway engineering, machine and plant construction, mining, agriculture and other important sectors of the future. + Entering Production Order data + Working on data gathering to help assist in process improvement projects + Actively participating in root cause analysis meeting for quality issues in the plant Other duties as assigned + Learning about conveyor belt processing defects Conveyor belt lab testing requirements and processes - Completion of 2nd year of college/university courses by working towards BS in Materials Science Engineering or Industrial Engineering degree. - 3.0 GPA - Computer skills in Word and Excel. - Ability to work 40 hours per week in the summer and a minimum of 10 hours per week during the school year. HS Diploma EEO / AA / Disabled / Protected Veteran Employer. Continental offers equal employment opportunities to all qualified individuals, without regard to unlawful consideration to race, color, sex, sexual orientation, gender identity, age, religion, national origin, disability, veteran status, or any other status protected by applicable law. In addition, as a federal contractor, Continental complies with government regulations, including affirmative action responsibilities, where they apply. To be considered, you must apply for a specific position for which Continental has a current posted job opening. Qualifying applications will be considered only for the specific opening(s) to which you apply. If you would like to be considered for additional or future job openings, we encourage you to reapply for other opportunities as they become available. Further, Continental provides reasonable accommodations to qualified individuals with a disability. If you need assistance in the application process, please reply to ******************** or contact US Recruiting at ************. This telephone line and email address are reserved solely for job seekers with disabilities requesting accessibility assistance or an accommodation in the job application process. Please do not call about the status of your job application, if you do not require accessibility assistance or an accommodation. Messages left for other purposes, such as following up on an application or non-disability related technical issues, will not receive a call back. **EEO-Statement:** EEO / AA / Disabled / Protected Veteran Employer. Continental offers equal employment opportunities to all qualified individuals, without regard to unlawful consideration to race, color, sex, sexual orientation, gender identity, age, religion, national origin, disability, veteran status, or any other status protected by applicable law. In addition, as a federal contractor, Continental complies with government regulations, including affirmative action responsibilities, where they apply. To be considered, you must apply for a specific position for which Continental has a current posted job opening. Qualifying applications will be considered only for the specific opening(s) to which you apply. If you would like to be considered for additional or future job openings, we encourage you to reapply for other opportunities as they become available. Further, Continental provides reasonable accommodations to qualified individuals with a disability. If you need assistance in the application process, please reply to ******************** or contact US Recruiting at ************. This telephone line and email address are reserved solely for job seekers with disabilities requesting accessibility assistance or an accommodation in the job application process. Please do not call about the status of your job application, if you do not require accessibility assistance or an accommodation. Messages left for other purposes, such as following up on an application or non-disability related technical issues, will not receive a call back. Ready to drive with Continental? Take the first step and fill in the online application.