Quality technician jobs in Abington, PA - 291 jobs

About us At Cooper University Health Care , our commitment to providing extraordinary health care begins with our team. Our extraordinary professionals are continuously discovering clinical innovations and enhanced access to the most up-to-date facilities, equipment, technologies and research protocols. We have a commitment to our employees to provide competitive rates and compensation programs. Cooper offers full and part-time employees a comprehensive benefits program, including health, dental, vision, life, disability, and retirement. We also provide attractive working conditions and opportunities for career growth through professional development. Discover why Cooper University Health Care is the employer of choice in South Jersey. Short Description This person performs audits and manages the registration work queue errors. This person will work with the front-line staff doing one/one training, coaching and informational training emails using the results of the WQ errors and Audits. This position contribution to employee engagement, improved financials through reducing denials and rework Experience Required * 3 years experience in a Contact Center environment with demonstrated experience in both learning and quality capacity preferred * Teaching or training experience is preferred; training experience within a medical or Healthcare environment a plus * Experience in or knowledge of any of the following is preferred: Central Scheduling, Medical Terminology, Insurance Verification, Registration, Scheduling, Authorizations, Referrals * Must be able to articulate and demonstrate an instructional/informational design methodology * Must be knowledgable of performance measurements, quality initiatives, coaching and mentoring, staff development, and the unique demands of frontline staff Education Requirements * High School Diploma Required * Bachelors preferred Special Requirements * Must be learner-focused, with the ability to develop targeted materials based on learner preferences, characteristics, competencies * Strong instructional design abilities (via experience or education) especially related to needs assessment and customized development for varied learners preferred; knowledge of performance based instructional methodology is preferred * Must have superior writing skills related to informational and instructional material, including the ability to present content in a non-paragraph and linear way. Experience with graphic design is a plus * Must be a high-performing and facile PC user and an expert in the Windows Suite (specifically PowerPoint and Word). Experience with E-Learning and Alternative Media a plus * Must possess solid classroom delivery skills related to motivating and capturing the attention of adult learners; must display high energy, confidence, a sense of fun, and the desire to provide a unique and memorable learning experience. A sample presentation will be required. * Must be motivated, decisive, and a problem solver with excellent time management, leadership aptitude and organizational skills * Must be a team player * Must have demonstrated experience in communicating effectively with all levels of management * Must be able to work varied hours as business needs change (i.e., possible evening and weekend hours)

Discover Veranova: At Veranova, we believe people are our most important asset, and we are dedicated to building the most talented workforce in our industry. Our commitment to uncompromising focus on quality, compliance, safety, and excellence in delivery shapes everything we do. We are not just looking for skills; we are seeking innovative individuals who have a mindset open to learning and growth, and a desire to make a difference. Veranova is a global leader in the development and manufacturing of complex active pharmaceutical ingredients (APIs) for pharma and biotech customers. With deep technical expertise and impressive flexibility, we develop solutions and processes that support and accelerate innovation. Join us on our mission to enable current and next-generation therapeutics to improve and save the lives of patients. Role Overview: The Production Technician will manufacture of bulk API pharmaceuticals in accordance with customer and internal specifications. Core Responsibilities: Complete batch records in accordance with FDA and Current Good Manufacturing Practices (cGMP) guidelines Provide process support and troubleshooting necessary to meet all customer requirements Maintain the facility in excellent FDA/cGMP posture ▪ Responsible for safety equipment and active participation in safety program and hazard analysis. Wears appropriate PPE for task. Ensure that waste is appropriately characterized, labelled, stored and disposed in compliance with all Company, state and federal regulations. Works collaboratively with Environmental, Health & Safety, as appropriate. Assure all production/support equipment is in proper operating condition and that all production equipment is appropriately labelled with a current status tag. Works collaboratively with Maintenance, as appropriate. Ensure the security and safe handling of all controlled substances at all times. Strictly adheres to all Company and DEA regulations. Ensure a level of housekeeping appropriate for a pharmaceutical manufacturer and maintain 5S areas. Active member of Emergency Response Team. Participate in Emergency Response Training and related activities. Promote a positive work environment by maintaining a safe work area and ensuring that their team members have the knowledge, skills and appropriate tools to perform their assigned duties and a thorough understanding of their performance expectations. Provide prompt, appropriate feedback to team members, both positive and constructive, in a continuing effort to develop employees to their full potential. Demonstrate a professional and positive attitude, integrity and a strong work ethic and encourages team members to do the same. Cooperate with all root cause investigations and follow corrective actions and compliance with Company policies and procedures, and all state and federal regulations occurs within department. Operate machines and equipment that involves set up and making adjustments to regulate temperature, pressure, flow and reactions or materials safely and in accordance with batch record and work instructions. Basic batch processing and unit operations, able to run all milling operations. Thinking is within well-defined procedures with assistance readily available. Proficient in all tasks/unit operations associated with a processing area ▪ Able to complete basic mechanical work required to keep operation moving Complex batch processing and unit operations, such as hydrogenations, PFD operations etc. Resolve regular technical problems and takes action to ensure the production plan continues to move Qualifications: Required High School Diploma with 5-7 years of experience in an API Manufacturing facility or AA in Chemistry, Engineering, or other related technical field with 3-5 years of experience or BS in Chemistry, Engineering or other related technical field Solid understanding of GMP and FDA Safety Awareness Authenticity and motivation to contribute to team success Ability to independently apply scientific and/or technical knowledge in the performance of job duties Commitment to continuous learning and improvement Effective written and verbal communication Special Factors Walking, standing for long periods of time while in plant, reaching, handling, twisting, and bending spine at waist when operating equipment. Obtain and maintain certification as forklift operator Able to lift 50lbs Must be willing to work a rotating shift Hourly Rate: $26-30 per hour Our Commitment: Health & Wellness: Comprehensive health & wellness benefits. Access to mental health resources and wellness programs. Generous PTO and holiday pay policies. Financial Wellness: Veranova is committed to fair and transparent compensation practices. This includes a competitive base salary, eligibility for performance-based bonuses, and an attractive 401(k) Plan with company match. Salary ranges reflect the scope and expectations of the role, and are based on market data, internal equity, and role-specific factors. Final compensation may vary depending on experience, skills, education, and business needs. Professional Development: Opportunities for continuous learning through LinkedIn Learning, workshops, conferences, and mentorship. Tuition Assistance for Undergraduate and Graduate degree programs. Inclusive Culture: At Veranova, an inclusive culture is integral to our values. We welcome people with diverse experiences and perspectives who share our mission to improve and save lives. Even if you don't meet every qualification, we encourage you to apply. Veterans, first responders, and those transitioning from military to civilian life bring valuable skills that strengthen our team. Additional Information: Applicants for this role must be authorized to work in the United States without further employer sponsorship. Agency and Search Firm Representatives : Veranova does not accept unsolicited resumes from agencies and/or search firms for this job posting. . All your information will be kept confidential according to EEO guidelines. Veranova is an Equal Opportunity Employer. It is the policy of Veranova to provide equal employment access and opportunity to all persons regardless of age, race, color, national origin, religion, sex, sexual orientation, gender identity and/or expression, physical or mental disability, genetic information, citizenship, marital status, veteran status, or any other characteristic protected by federal, state, or local law. All applications are carefully considered, and your details will be stored on our secure Application Management System. This is used throughout Veranova for the selection of suitable candidates for our vacancies as they arise. Veranova respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice .

Student employees will support the Theater & Dance department's productions, specifically in the areas of technical production, as required by a specific production's needs. This position will be specialized toward the technology components of the theatrical process (lighting, sound, video, etc.), but will also have crossover with the scenic and carpentry responsibilities as needed. This position will also support the technology needs for campus events taking place in the Kaleidoscope (lectures, dinners, ceremonies, etc.) Work is done in the Kaleidoscope's scene shop, Lenfest Theater, and Blackbox Studio Theater, under the direct supervision of the Theater & Dance department's Technical Director & Production Manager and Performing Arts Technician. Schedule may vary weekly. Some evening and weekend hours will likely be required during a production's load in period and tech weekend, and during campus events taking place in the building. Typical work week may average between 12 and 20 hours. Responsibilities: Learn and practice a variety of skills (depending on the needs of the production) primarily including hanging and focusing lights, setting up microphones and speakers, and (as needed for the production), scenic carpentry, metalworking, scenic painting, and theatrical rigging. Support the technology needs for campus events taking place in the Kaleidoscope (lectures, dinners, ceremonies, etc.) Train on the theaters fly-system and operation along with other specified theatrical equipment. Help with the set-up of both theater spaces for rehearsal and technical rehearsals. Assist in scheduled maintenance and organization of shop and theater gear and equipment. Requirements: Current full-time student at Ursinus College Must learn shop and theater safety requirements and adhere to those protocols during work calls. Must be able to lift 25-50lbs. Must be comfortable with, and/or, willing to, work at heights. Prior experience in technical theater is preferred, but not required. Other Duties: The above statements are intended to describe the general nature and level of work being performed by the individual(s) assigned to this position. They are not intended to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Job responsibilities and activities may be modified or changed at any time with or without notice. Job descriptions will be audited periodically by the Ursinus Human Resources department to ensure they are up-to-date and reflect the essential responsibilities and duties of the job. Ursinus EEO Statement Ursinus is an EEO employer. Ursinus College does not discriminate on grounds of race, color, national origin, gender, sexual orientation, gender identity or expression, religion, age, creed, ancestry, veteran status, marital status, disability, or other classification protected by applicable law in the administration of any of its educational programs or activities or with respect to employment.

The Quality Engineer in the Global Industrial Applications Pre & Post Market Quality team will be fully involved in managing quality processes during product development as well as during the product lifecycle.Primary Duties: Monitor a product portfolio intended to food and/or pharmaceutical industrial diagnostic (reagents, instruments, software; microbiology, molecular biology, immunology); as such, you will be: Member of the project teams for developing or modifying these products. The preferred contact and the guarantor of the quality processes implemented throughout the product lifecycle (such as design control, design change management, field actions management), in accordance with bio Merieux, international and customer requirements. Pilot and ensure that product risk management is controlled all along the product lifecycle. Be able to challenge and to propose alternatives on technical and strategic choices and decisions made in the projects, with regards to risk-taking on quality and business aspects; be able to escalate wisely. Manage the organization of Field Action Board meetings in charge of deciding on the actions to be taken in the field in the event of problems with the marketed products; as such, you will interface with GiCS (global industry customer service) representatives, manufacturing site quality manager, program directors and Industrial Applications Quality Managers. Be the preferred contact for other functions, on quality processes for your product ranges. Support the teams for audit preparation and be the preferred audit contact for quality purposes about development and field actions on your product portfolio. Contribute to improving the product lifecycle efficiency or any quality process required within the Industry Unit; as such, you will coordinate or contribute to continuous improvement initiatives as well for your ranges as for overall practices harmonization, interfacing with other professions. Perform all work in compliance with company quality procedures and standards. Minimum Qualifications: Bachelors degree in a Scientific field required. Master's degree preferred. 2 years' experience in Quality or Research and Development Including expereince in PCR, molecular biology, microbiology techniques and diagnostic product development. Industry experience preferred. Quality job and design control for the development of reagents and/or instruments experience is preferred. Knowledge, Skills and Abilities: Knowledge of standards applicable to design control and to pharma and/or food field (ISO 9001, ISO 13485, ISO 14971, 21CFR820, GAMP, 21CFR11, GMPs, ISO 16140 ...) and the capacity to act as a quality auditor. Knowledge in the interpretation and application of relevant Domestic and International Regulations and Industry Standards (e.g. ISO, QSR, IVDR, AFNOR etc.). Knowledge of the industrial domain is strongly expected (pharmaceutical, cosmetic, food industries) Experience in participation in the management of regulatory audits (i.e. ISO 9001,ISO 13485, FDA, etc.). Manage and meet competing deadlines, requiring careful prioritization and time management to ensure all tasks are completed on time. Understand complex information and interpret it accurately, often requiring critical thinking and analysis to grasp the full picture. Effectively deal with ambiguity requiring adaptability, critical thinking, and proactive communication to navigate situations with limited details Informing others by sharing clear, timely information to ensure alignment. Functional skills including critical thinking, adaptability, time management, communication, problem-solving and digital literacy. Critical thinking, using logic and reason to analyze information and make decisions in the workplace Managing and measuring work by tracking progress, performance, and goal achievement using metrics and KPIs. Communicates instructions clearly and effectively Ability to work cross-functionally allowing for better collaboration and communication when working across teams to achieve shared objectives Ability to cooperate with others at all levels including leadership Consistently uphold and reflects the core ethical principles and values that bio Merieux promotes Domestic and International travel - 5%The estimated salary range for this role is between $77,900 - $98,700. This role is eligible to receive a variable annual bonus based on company, team, and individual performance per bio Merieux's bonus program. This range may differ from ranges offered for similar positions elsewhere in the country given differences in cost of living. Actual compensation within this range is determined based on the successful candidate's experience and will be presented in writing at the time of the offer.In addition, bio Merieux offers a competitive Total Rewards package that may include: A choice of medical (including prescription), dental, and vision plans providing nationwide coverage and telemedicine options Company-Provided Life and Accidental Death Insurance Short and Long-Term Disability Insurance Retirement Plan including a generous non-discretionary employer contribution and employer match. Adoption Assistance Wellness Programs Employee Assistance Program Commuter Benefits Various voluntary benefit offerings Discount programs Parental leaves #LI-US#biojobs Please be aware that recruitment related scams are on the rise. Fraudulent job postings are being placed on other websites, and individuals posing as bio Merieux Talent Acquisition team members are reaching out via email or text message in an attempt to collect your personal and confidential information. In some cases, these scammers are also conducting bogus interviews prior to extending fraudulent offers of employment. Beware of individuals reaching out using general phone numbers and non-bio Merieux email domains (i.e. Hotmail.com, Gmail.com, Yahoo.com, etc.). If you are concerned that an interview experience or offer of employment might be a scam, please make sure you are searching for the posting on our careers site or contact us at [emailprotected]. BioMerieux Inc. and its affiliates are Equal Opportunity/Affirmative Action Employers. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Please be advised that the receipt of satisfactory responses to reference requests and the provision of satisfactory proof of an applicant's identity and legal authorization to work in the United States are required of all new hires. Any misrepresentation, falsification, or material omission may result in the failure to receive an offer, the retraction of an offer, or if already hired, dismissal. If you are a qualified individual with a disability, you may request a reasonable accommodation in BioMerieux's or its affiliates' application process by contacting us via telephone at , by email at [emailprotected], or by dialing 711 for access to Telecommunications Relay Services (TRS).

Internships through the Department of Environmental Protection (DEP) inspire an exciting opportunity for students to gain hands-on experience and assist with a wide-range of environmental protection activities and initiatives involving various program areas within the agency. We are seeking ambitious and dedicated interns who are eager join us in our mission to protect Pennsylvania's air, land, and water from pollution and provide for the health and safety of its citizens through a cleaner environment. Apply today and start building a strong foundation for a fascinating and fulfilling career in public service! DESCRIPTION OF WORK As an Air Quality Intern with DEP, you will have the opportunity to participate in a unique blend of regulatory education, community engagement, and field science. You will learn the various aspects of the air quality program by providing municipality and facility outreach regarding regulations, attending inspections with air quality specialists and learning how to properly document reviews, and assisting in organizing air quality files and lists. Interested in learning more? Additional details regarding this position can be found in the position description. Work Schedule and Additional Information: Full-time internship which will occur from 5/1/2026 through 8/28/2026. Work hours are 8:00 AM to 4:00 PM, Monday - Friday, with a 30-minute lunch. Telework: You will not have the option to telework in this position. Salary: In some cases, the starting salary may be non-negotiable. You will receive further communication regarding this position via email. Check your email, including spam/junk folders, for these notices. REQUIRED EXPERIENCE, TRAINING & ELIGIBILITY QUALIFICATIONS Internship Requirements: Enrollment in good academic standing as a FULL-TIME student in a bachelor's, or advanced degree program in: Environmental Science Environmental Health Biology An approved major course at an accredited college or university. Good academic standing (2.0 GPA or higher) Freshman year completed by May 2026 Pennsylvania residency or enrollment of a Pennsylvania college or university. Additional Requirements: You must possess a valid driver's license which is not under suspension. You must be able to perform essential job functions. How to Apply: Resumes, cover letters, and similar documents will not be reviewed, and the information contained therein will not be considered for the purposes of determining your eligibility for the position. Information to support your eligibility for the position must be provided on the application (i.e., relevant, detailed experience/education). This posting requires submission of a copy of your college transcript(s). Unofficial transcripts are acceptable. You may upload your document as an attachment during the application process. You must still complete the application and answer the supplemental questions. All documents MUST be uploaded prior to the submission of your application. Your application must be submitted by the posting closing date . Late applications and other required materials will not be accepted. Failure to comply with the above application requirements may eliminate you from consideration for this position. Veterans: Pennsylvania law (51 Pa. C.S. *7103) provides employment preference for qualified veterans for appointment to many state and local government jobs. To learn more about employment preferences for veterans, go to ************************************************ and click on Veterans. Telecommunications Relay Service (TRS): 711 (hearing and speech disabilities or other individuals). If you are contacted for an interview and need accommodations due to a disability, please discuss your request for accommodations with the interviewer in advance of your interview date. The Commonwealth is an equal employment opportunity employer and is committed to a diverse workforce. The Commonwealth values inclusion as we seek to recruit, develop, and retain the most qualified people to serve the citizens of Pennsylvania. The Commonwealth does not discriminate on the basis of race, color, religious creed, ancestry, union membership, age, gender, sexual orientation, gender identity or expression, national origin, AIDS or HIV status, disability, or any other categories protected by applicable federal or state law. All diverse candidates are encouraged to apply.

Are you looking to power the next leap in the exciting world of advanced electronics? Do you want to help solve problems that drive success in the rapidly evolving technology and connectivity landscape? Then bring your problem-solving, passion, and creativity to help us power the next leap in electronics. At Qnity, we're more than a global leader in materials and solutions for advanced electronics and high-tech industries - we're a tight-knit team that is motivated by new possibilities, and always up for a challenge. All our dedicated teams contribute to making cutting-edge technology possible. We value forward-thinking challengers, boundary-pushers, and diverse perspectives across all our departments, because we know we play a critical role in the world enabling faster progress for all. Learn how you can start or jumpstart your career with us. The Qnity Parlin, NJ site is pleased to announce that we are accepting applications for Manufacturing Technicians. The Manufacturing Technician position works in 2 or 3 shift operation on either a five or seven-day schedule. Production tasks are associated with the Hitachi reactors, the DuPont reactor, small lot size manufacturing, PD formulation, ancillary mixing and filling, and the polyimide bottling and labeling. Individuals are expected to understand and audit the cleanliness, maintenance and fitness for use of the equipment in these six production process centers. Operations will be carried out in either a special Powder handling room, a Class 10,000 manufacturing cleanroom or a Class 100 filling and labeling cleanroom. Manufacturing Technician will perform in-process quality control testing (e.g. viscosities, acid number, pH, or similar tests). The equipment for these tests will be in the manufacturing control room. In addition, Manufacturing Technicians will be required to understand, input data to and use the EQS quality system. They will need a basic understanding of statistical process control (SPC) and must help the organization maintain ISO compliance. This position requires that materials be precisely measured, fed and the process controlled in compliance with batch sheets, SOP's and SOC's. Manufacturing Technicians are expected to monitor raw material and intermediate inventory levels to assist in ensuring that they are available in sufficient amounts for production demands. They will also be called upon to perform cycle counts and audit material movement transactions. Input transactions in the inventory system (currently IPS). Manufacturing Technicians will handle waste and RCRA "Hazardous Waste" associated with the job, (as defined in State Regulations). The Technician is also responsible for labeling and packaging finished product for shipment in the proper manner to assure accuracy and customer satisfaction. Responsibility: Careful and accurate performance is required so that all materials are correctly weighed, loaded, timed, and controlled to assure consistency of quality. The Technician is responsible for recording weights of material, yield, finished inventory, temperature, instrument readings, and keeping records of the work performed and entering and updating online inventory systems. The Technician must work in an efficient manner, eliminating waste wherever possible. All necessary personal protective equipment and cleanroom uniforms required by the job are to be worn. A minimum requirement for this U.S. based position is the ability to work legally in the United States. No visa sponsorship/support is available for this position, including for any type of U.S. permanent residency (green card) process. No relocation assistance is available for this position. In order to be qualified for this role, the following is required * High School diploma or equivalent * Must be available to work rotating 8 to 12 hours shifts * Must be able to do arithmetic, know how to use percentages and decimals * Must be able to read the instructions pertinent to the job. * Must work safely and efficiently handling of drums and material, as well as ability to set up, make adjustments, and properly operate a variety of different types of manufacturing equipment is required. * Must have sufficient knowledge and ability in keyboarding skills in order to perform data entry activities into online systems. * Must be able to operate a process control system. * Must be able to operate a fork lift truck or will have the opportunity to be trained to operate a fork lift truck This job description defines minimum requirement for safe and efficient plant operation and does not limit the scope of the job described. Please include (paste or attach) an updated resume detailing your experiences and qualifications with your application for consideration Join our Talent Community to stay connected with us! Qnity is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility Page for Contact Information. Qnity offers a comprehensive pay and benefits package. To learn more visit the Compensation and Benefits page. We use Artificial Intelligence (AI) to enhance our recruitment process.

The Quality Technician in microbiology aseptic processes ensures products meet microbiological standards and are manufactured in a sterile environment. This role monitors quality assurance standards and encourages the team to consistently deliver excellent results. The Quality Technician is responsible for executing best practices, goals, and established standards for the team. Primary Responsibilities * Perform tests to identify harmful microorganisms, maintain a sterile environment, and ensure regulatory compliance * Document and analyze test results following good laboratory practices for microbiology and quality control laboratories * Identify and address production issues, contributing to corrective action * Inspect work daily, maintain cleanliness, organize supplies, and assemble sterile products using aseptic technique * Handle biohazard spills, train new hires, and demonstrate the use of cleaning chemicals * Uphold quality standards, follow GFSI, HACCP, and GMP guidelines, and participate in food safety inspections * Support sanitation operations, monitor performance, and provide report * Address customer complaints, conduct audits, and contribute to quality assurance improvements * Promote continual improvement and collaborate on cross-functional projects * Perform routine environmental monitoring within cleanrooms and production areas to detect microbial contamination * Conduct microbiological assays on raw materials, in-process samples, and finished products using various techniques * Accurately record and interpret test results, maintaining detailed documentation of activities, including deviations, investigations, and corrective actions * Participate in investigations for out-of-specification (OOS) results, deviations, and complaints related to microbiology testing * Ensure proper calibration and maintenance of laboratory equipment used for microbiological analysis and QC testing Prior Knowledge/Experience * Bachelor's Degree in Microbiology, Biology, or related field * 1-3 years of experience in quality; food processing experience preferred * Strong understanding of aseptic techniques and microbiology principles * Experience with various microbiological testing methods, including plate counting, membrane filtration, and rapid microbial detection * Proficiency in data analysis, documentation, and recordkeeping * Excellent attention to detail; ability to work independently and in team environments * Familiarity with GMP regulations and quality systems * Ability to utilize provided PPE - safety glasses, ear plugs/muffs, bump caps, dust masks, company uniform, safety shoes * Ability to be respirator certified if required * Physical ability to sit, stand, walk, climb, stoop for up to 8 hours; lift 55 lbs consistently; lift/hold objects overhead for extended periods * Ability to climb and work on a 40-foot extension ladder for extended periods as needed; work at heights up to 50 feet * Ability to maneuver and work in confined areas with variations in temperature, humidity, and air quality The following common allergens are processed in our facilities: wheat, eggs, dairy, and soy. Looking for a Career for Good? We offer a competitive compensation and benefit package, designed to promote a Happier, Healthier You which includes: Compensation: * Compensation for this role is hourly and will be based on your experience, skills, and location, with a typical range between $24.69/HR and $30.87/HR. * This role is eligible for a targeted annual bonus equal to $3500. Final bonus payouts are determined by both individual and company performance. Benefits: * Medical coverage starts the first of the month-no waiting period * Immediate 401(k) eligibility with fully vested matching contributions * Over 5 weeks of paid time off in your first year * Free life coaching, onsite health exams, and 24/7 access to Registered Nurses * Lifestyle Spending Account #LI-DNI Apply now * Apply Now * Start applying with LinkedIn

The Public Housing Finance Consultant partners with Senior Consultants and Managers on client projects and engagements to assist in delivering accounting, audit and management consulting services for Public Housing Agencies client base. Job Duties: Performs outsource accounting function for clients including entering trial balances, making entry adjustments as needed, verifying trial balance amounts, and setting up electronic files to support client Performs detailed account analysis and may rebuild general ledgers and prepare financial reports including balance sheets, income statements and cash flow statements, as needed Interprets and applies knowledge of Public Housing Authority (PHA) Finance standards to guide effective and efficient delivery of quality services and products such as bank reconciliations, audit support workpapers, and board financial reports Provides strong written work products including workpapers that meets the client's requirements and PHA Finance quality standards Regularly interacts with clients to complete general ledgers, account analysis as well as to answer basic client questions and consults with seniors to provide responses to more complex questions Applies principles and knowledge of Generally Accepted Accounting Principles (GAAP) and of Government Accounting Standards Board (GASB) to provide guidance to clients on adherence to requirements in accounting records and financial reporting. Documents and communicates an understanding and application of all professional standards on an engagement to follow required grant reporting and compliance with grant requirements Makes basic constructive suggestions to improve the client's programs and policies, as needed Researches Housing and Urban Development (HUD) accounting and operational guidance and assists clients in making financial and operational decisions based on issued Accounting Briefs and PIH notices published Other duties as required Supervisory Responsibilities: N/A Qualifications, Knowledge, Skills and Abilities: Education: Bachelor's degree with a focus in Accounting or Finance, required Experience: Leadership experience, preferred Accounting based internship, preferred License/Certifications: N/A Software: Proficient in Microsoft Office Suite, specifically Word, Excel and PowerPoint, required Prior experience with various assurance applications and research tools, preferred Language: N/A Other Knowledge, Skills, & Abilities: Strong written and verbal communication skills Ability to follow instructions as directed Ability to work effectively in a team setting Takes appropriate actions without being asked Solid organizational skills especially ability to meet project deadlines with a focus on details Ability to successfully multi-task while working independently or within a group environment Proven ability to work in a deadline-driven environment and handle multiple projects simultaneously Ability to learn general ledger software programs Individual salaries that are offered to a candidate are determined after consideration of numerous factors including but not limited to the candidate's qualifications, experience, skills, and geography. California Range: $85,000 - $90,000 Colorado Range: $73,000 - $77,000 Illinois Range: $78,000 - $82,000 Maryland Range: $83,000 - $87,000 Massachusetts Range: $83,000 - $87,000 Minnesota Range: $70,000 - $74,000 New Jersey Range: $74,000 - $82,000 NYC/Long Island/Westchester Range: $83,000 - $87,000 Washington Range: $78,000 - $80,000 Washington DC Range: $83,000 - $87,000

Job Description The Quality Technician's role will be seen as pivotal in our efforts to drive at-source quality at ALMAG. The role requires the individual to support new product introduction, provide quality training, support, and to work collaboratively with various teams to develop standard work and ensure compliance. DUTIES AND RESPONSIBILITIES The quality technician's primary responsibility is to positively support the various departments in assuring that the requirements of the customer and quality management system are being met throughout each department. Additionally, the quality technician contributes to the continuous improvement of Almag's quality system. The duties and responsibilities of the Quality Technician are detailed below, but not limited to the following: Supporting the New Product Introduction process by assuring new customer requirements are understood and achieved. Responsible for performing audits of various departments to ensure that the QMS requirements are being met. Communicate new product status, its performance based on data, and provide samples and feedback to the respective departments with continuous improvement approach in mind. Responsible for collecting samples as required for various customer and internal requirements. Responsible for tracking and supporting Quality Containment processes for nonconforming product in all departments. Responsible for supporting production team in achieving customer requirements through training, auditing, and development of standard documents. Provide direction and support to any special sorting if needed, with the focus on accuracy and efficiency of sorting. Perform product testing for mechanical properties. Support team lead and shift supervisors to determine criteria for acceptance or rejection when there is uncertainty. Provide direction to the team if clarification is required for WO notes or requirements. Perform other related duties as assigned. Requirements MINIMUM QUALIFICATIONS Education/Experience At least 3 years' experience in quality, working in manufacturing environment. ASQ Certified Quality Technician (CQT) would be an asset. Certified Internal Auditor would be an asset. Technical Skills/Competence Excellent teamwork and collaboration across departments and within teams Work Efficiently Flexibility/Adaptability to meet customer business requirements. Communicate clearly and effectively, verbally and in writing. Must be able to read and understand engineering drawings. Basic knowledge of GD&T would be an asset. Ability to work and make decisions independently. Good mechanical aptitude and attention detail. Must be competent in the use of measuring instruments i.e. Calipers, micrometers. Basic proficiency with MS-office (Excel, Word, PowerPoint). Fork Lift Certified Benefits Profit Sharing Education Assistance Program Social Events Safety Shoe and Glasses Allowance Internal Growth and Development Health and Dental Life and AD&D Vision Critical Illness Insurance Long Term Disability

Our client is a medical device company dedicated to offering innovative solutions for treatment of chronic heart failure. The Company's developments are based on its proprietary technology for administrating Cardiac Contractility Modulation therapy. Job Description Write and review of SOPs and other quality assiuance related technical data forms and quality documents proper maintenance of control documents in Quality Assurance Control documents to differents departments Review validation protocols for GMP compliance Assist in carrying out internal quality audits on company systems and documentations perform investigations on non-conformances and customer complaint close out and corrective actions Audit on-going vendors, systems and documents to assure quality assurance compliance with regard to all internal procedures as well as regulatory guidelines Provide GCP/ QA support and avdvice to internal and external clients Ensure the timely and effective follow up to all identified or assigned quality issues Maintains and demonstrates understanding of global standards, regulation and regulatory bodies to include but not limited to ISO13485, 21FR; part 820 AIMD Assist in the maintenance ogf Quality Management System under direction of Director, Quality Assurance Participate in Mock inspections for FDA inspection preparation Qualifications Ability to work independently with little or no supervision Exeptional oral and written communication capabilities Advance computer knowledge in MS Office programs Bachelors's Dregree in related field 4-6 years related experience Experience working in regulated environment with medical devices Experience with FDA inspections and /or Notified Bodies Audits desirable Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionJob Summary: Quality Inspector:Precision Machine Shop is seeking a dedicated and detail-oriented Quality Inspector to join our team. The Quality Inspector will be responsible for ensuring that our products meet the highest quality standards, from incoming raw materials, In-process assemblies, to finished goods. They will play a vital role in maintaining our reputation as a trusted manufacturer of precision metal products. Responsibilities: Quality Inspector: Conduct inspections on incoming raw materials, parts, sub-assemblies, and finished goods to ensure compliance with quality specifications and standards. Follow established inspection checklists, testing procedures, and documentation protocols. Perform visual inspections, measurements, and functional tests utilizing various tools. Identify and document non-conformities, defects, and discrepancies, and work closely with the production team to address and resolve issues promptly. Adhere to relevant quality standards, regulations, and industry best practices. Participate in internal quality audits and assist in the implementation of corrective and preventive actions. Provide timely and accurate inspection reports and documentation. Collaborate with cross-functional teams to drive continuous improvement initiatives related to quality control and assurance. Stay updated on industry trends, advancements, and regulatory changes related to quality assurance. Maintain a clean and organized work area, ensuring that all testing equipment is properly calibrated and maintained. Requirements: Quality Inspector High school diploma or equivalent; additional technical certifications or qualifications in quality assurance are preferred. Proven experience as a Quality Inspector, preferably in the metal fabrication or manufacturing industry Strong knowledge of quality control principles, methods, and techniques Proficient in using measurement tools and equipment such as calipers, micrometers, gauges, and CMM (Coordinate Measuring Machine) Excellent attention to detail with an ability to identify and document quality issues effectively. Familiar with reading and interpreting engineering drawings, specifications, and technical documentation Good communication skills, both written and verbal Ability to work independently and collaboratively within a team environment. Familiarity with ISO 9001 or other quality management systems is a plus. Knowledge of Lean Six Sigma methodologies is an added advantage. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

Level One: At the direction of the Quality manager, level one quality technicians train to develop the ability to use predetermined methods, operations, setups, and prescribed specifications to perform in-process and completed inspection of products such as machined parts, mechanical assemblies, processed parts and purchased standard hardware. They also perform verifications of part identification and configurations. Level one quality technicians will arrange inspection queues to identify priority work. In addition, they will identify and segregate non-conforming product using basic knowledge and understanding of Geometric Dimension and Tolerancing methods per ASME 14.5, and common inspection measuring equipment including, but not limited to, surface plates, micrometers, height gages, radius gages, protractors, profilometers, bore gauges, and dial indicators as necessary to complete assignments. Level one quality technicians will demonstrate blueprint reading and basic math skills, basic PC skills, including Microsoft Office and the ability to use MRP or ERP systems after instruction. Primary Duties & Responsibilities: Visually observe dimensional and functional characteristics of the product in final form. Perform first part on startup. Evaluate product manufacturing. Review all certifications for incoming material received. Perform in-process inspection of product during manufacturing and final inspection with use of optical comparators, thread gages, height gauges, calipers, micrometers and profilometer. Reconcile final inspection documentation for shipments. Perform all other duties as assigned. Required Skills: Ability to perform multiple tasks in a fast-paced environment to assure delivery requirements. Effective oral and written communication skills. Ability to keep accurate records. Detail oriented and quick learning ability. Ability to follow documented procedures and standards. Excellent time-management skills with the ability to work independently with little supervision. Experience & Education 0-1 years of recent and relevant work experience or training High School Diploma or GED Some Engineering or technical training/background strongly preferred. Proficiency with general computer usage Familiarity with precision measurement tools (calipers, micrometers, etc.) preferred. Working Conditions/Physical Requirements: N-Never, O-Occasionally (80%) Exposure to Adverse Working Conditions: · Noise, Noxious Orders, Temperatures F · Hazardous Materials O Physical Conditions: · Close Eye Work (computers, typing, reading, writing) F · Sedentary (continuous sitting) O · Light Work (standing, walking, lifting C · Moderate Work (lifting 15-30 pounds, prolonged use of small hand instruments or tools) F · Moderately Heavy Work (lifting, moving, loading up to 35 pounds) O · Heavy/Hard Work (above average strength & stamina) O Travel Requirements: · None

Who you are: Knowledge of Quality Assurance/Quality control/Operations in a regulated environment Familiar with lab equipment operation and set-up. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports and procedures. Ability to successfully present information and respond to questions from groups of managers, clients, customers, and the public. Great Teammate and good social skills Must be able to interface effectively with all levels of the company employees How you will thrive and create an impact Issuance of controlled manufacturing and testing documents to Manufacturing and Quality Control as per the production schedule. Issuance of controlled labels used for labelling finished goods and other related samples. Monitor the equipment program including calibration and preventative maintenance timelines and complete quality assurance sign-off for equipment workorders. Issuance and reconciliation of equipment and room logbooks. Coordinate the release of raw materials after completion of review and approval of supporting documentation including supplier and quality control testing records. Conduct reconciliation, filing and archiving of all quality-controlled records. Store completed documents in the appropriate data files and coordinate off-site document storage with third party as necessary. May provide pre-run line clearance to manufacturing. Consult with document originators to resolve discrepancies. Work closely with internal departments to assure commitment to customer is met in a timely manner. Management of Label Program. Includes development of master labels, maintain controlled label stock, setting inventory safety stocks, printer supplies, and coordinating reorders. May provide batch record review support. Writing and revising SOPs as part of process improvement initiatives or as needed to support the department. Coordination of document control activities and delegating with other quality coordinators to drive workload completion at the direction of quality management. Actively participate and drive the quality and safety culture of the site. Performs other duties as assigned Environment Typically works in an office environment with adequate lighting and ventilation and a normal range oftemperature and noise level. May also work in warehouse setting with appropriate protective wear if performing pre-fill, in-process, and final inspections on product. Work assignments are diversified. Examples of past precedent are used to resolve work problems. New alternatives may be developed to resolve problems. A frequent volume of work and deadlines impose strain on routine basis. Minimal physical effort is required. Work is mostly sedentary but does require walking, standing, bending, reaching, lifting or carrying objects that typically weigh less than 10 lbs.

SUMMARY: This position is primarily responsible for maintaining all instruments, standards, and other necessary analytical items and to accurately analyze and report results for incoming raw material, in process and final product as required by EFC's quality system. DUTIES AND RESPONSIBILITIES: • Ensures all analytical instrumentation is maintained in qualified and operational condition at all times, reporting and exceptions to the Lab Supervisor. • Completes all preventive and corrective maintenance and calibration activities in a timely and accurate manner. • Ensures laboratory standards, reagents, consumables and other supplies are maintained in stock or are available to support quality control activities. • Performs analysis for incoming raw material, in process and final product as required by EFC's quality system. • Prepares and maintains analytical documentation on all conducted analyses as required by EFC's quality system. • Completes all analytical or other tasks required by EFC's quality, SHE, or other systems as assigned. • Attends training to develop relevant knowledge and skills. • Performs other related duties as assigned or needed. SUPERVISORY RESPONSIBILITIES: • This job has no supervisory responsibilities. QUALIFICATIONS: • High school diploma or general education degree (GED); or 1-3 years of related experience and/or training, or equivalent combination of education and experience. • Computer skills required: Microsoft Office Suite; ERP system. COMPETENCIES: • Diversity - Demonstrates knowledge of EEO policy; Shows respect and sensitivity for cultural differences; Educates others on the value of diversity; Promotes a harassment-free environment; Builds a diverse workforce. • Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values. • Analytical - Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs work flows and procedures. • Change Management - Develops workable implementation plans; Communicates changes effectively; Builds commitment and overcomes resistance; Prepares and supports those affected by change; Monitors transition and evaluates results • Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments. • Innovation - Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work; Develops innovative approaches and ideas; Presents ideas and information in a manner that gets others' attention. • Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. • Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments. • Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time; necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan. • Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. • Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. • Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. • Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information. PHYSICAL DEMANDS AND WORK ENVIRONMENT: • Continually required to stand, walk, utilize hand and finger dexterity. • Occasionally required to climb, balance, bend, stoop, kneel or crawl, sit, talk or hear. • Continually work near moving mechanical parts. • Frequently work around fumes, airborne particles, or toxic chemicals. • Occasionally exposure to outside weather conditions. • While performing the duties of this job, the noise level in the work environment is usually moderate. • The employee must frequently lift and/or move up to 100 pounds. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The Quality Inspector's role is to utilize curtainwall knowledge alongside 2D and 3D engineering / CAD drawings to identify potential quality and installation issues in curtainwall components or units. A Quality Inspector may be assigned work in different areas, depending on production requirements. All Quality Inspectors are required to abide by all applicable New Hudson Facade requirements, as outlined in the Employee Handbook. Quality Inspectors directly report to the Quality Supervisor. Role and Responsibilities: Inspect and approve curtainwall components or units at various points of the manufacturing process for compliance with curtainwall quality/cleanliness expectations. Inspect and test incoming materials (aluminum, glass, stone, machined parts, etc.) against drawings, procedures and other defined quality standards; enters inspection results in Epicor; maintains various inspection logs and spreadsheets; inspects completed curtain wall units and crating. Enters NCRs for discrepant materials as found after inspection; assists the QC Coordinator in tagging and managing rejected parts. Read and manipulate 2D / 3D engineering CAD drawings to determine if curtainwall units and its individual components are fabricated and installed correctly. Communicate with upstream quality / assembly personnel when quality issues are identified. Provide information that can support the quality of the completed curtainwall unit. Maintain inspection logs and spreadsheets, as needed. Utilize ADP / Epicor to track hours spent supporting projects. Comply with all safety standards and requirements defined by NHF. Care of all assigned tools (calipers, spectrophotometers, protractors, etc.). Other tasks as required by management. Skills and Abilities: Experience working in a heavy manufacturing or large-assembly environment. Ability to read and understand 2D engineering drawings. Familiarity with manipulating 3D engineering drawings on CAD software. Advanced knowledge and experience with measurement tools (Tape measure, caliper, protractor, etc). Ability to act with professionalism; ability to multitask. Ability to follow both written and verbal instruction. Communication skills (both written and verbal). Physical Requirements: Ability to move equipment weighing up to 50 pounds. Applicants must be able to perform repetitive lifting and other physically demanding tasks. Qualifications and Education Requirements: HS Diploma AS Degree or higher preferred. Experience in the curtainwall / construction industry preferred. New Hudson Facades is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.

Since 1946, The Jet Pulverizer Company, Inc. has been committed to providing state-of-the-art processing equipment and services. The continuous technological advancement of our line of Micron-Master Jet Pulverizers and ongoing modernization and expansion of our Custom Grinding Division provide our customers with unsurpassed value and quality in both jet pulverizing equipment and custom grinding services. The Quality Technician plays a crucial role in ensuring the safety, quality, and compliance of products manufactured within our FDA-regulated micronization facility. This position involves monitoring production processes, conducting inspections, and collaborating with cross-functional teams to maintain high standards. Requirements Essential Duties of the QC Lac Tech: PRIORITY - Product sample testing as required Complete paperwork on a timely basis Create sample composites and retains as indicated by customer need Generate CoA's as required Stock sample cups and lids Monitor lab consumables and order as needed Maintain clean lab Monitor calibration status of instrumentation and calibrate as required Perform routine inspections of raw materials, intermediate products, and finished goods. Utilize precision measuring instruments and testing equipment to verify product specifications. Identify any deviations from quality standards and report findings promptly. Monitor micronization processes, including particle size reduction, blending, and packaging. Collect samples at various stages of production for analysis. Ensure adherence to standard operating procedures (SOPs) and regulatory guidelines. Maintain accurate records of inspections, test results, and corrective actions. Prepare quality reports and communicate findings to supervisors and management. Collaborate with the Quality Assurance team to address non-conformities. Assist during internal and external audits, including FDA inspections. Ensure compliance with cGMP (current Good Manufacturing Practices) and other relevant regulations. Support the implementation of quality management systems. Provide guidance on quality-related matters to colleagues. Foster a culture of quality awareness and accountability. Must be willing to work overtime as needed, including some mandatory weekend shifts. Experience/Skills HS Diploma required. Associate degree preferred. Computer proficiency - Microsoft Windows/Outlook, Microsoft Office 1 - 2 years lab experience Experience working in an FDA-regulated environment (pharmaceuticals, medical devices, or related industries). Proficiency in using measurement tools (calipers, micrometers, etc.) and analytical instruments. Knowledge of cGMP, ISO standards, and quality control principles. Strong attention to detail, problem-solving skills, and ability to work independently. Excellent communication and teamwork abilities. Salary Description $20 - $21 / hour

KMM Group offers rewarding opportunities to propel the world forward through mission critical components for air, space, life-saving equipment and more. You don't want to miss out on this opportunity! A few of our Company Values: Paid to Think Make it Fun Choose Positive Support Each Other Strive for Excellence Inspire Passion Job requirements Quality Technician, Wire Grind (QTWG) 📍 Hatboro, PA | Full-Time At KMM Group, Ltd., we craft mission-critical components that fuel life-saving medical devices and cutting-edge aerospace systems. We are seeking a Quality Technician, Wire Grind (QTWG) to join our team. The QTWG requires an acute eye for detail and strong visual acuity. Though there is some aspect of dimensional measurement in the position, a greater percentage of the work is connected to the visual inspection of critical characteristics of guidewires/corewires (GW/CW) 🔧 What You'll Do Tactical Responsibilities a. Visual inspection of GW/CW i. Roll test ii. Length test iii. PTFE damage b. Tensile testing as required c. Perform final dimensional inspection operations as required (if applicable) d. Perform FAI as required (if applicable) e. Document all findings using Good Documentation Practices (GDP) f. Wash wires g. Package wires Strategic Responsibilities Become proficient at all aspects of the visual inspection process for GW/CW in order to maximize the throughput of wires through QC Physical Requirements and Demands: Keen attention to detail is required for success in QC Ability to sit at a desk, or QC work station, for prolonged periods of time ✅ What You Bring: High School diploma or equivalent Prefer experience in a manufacturing-based pre-apprenticeship program which offers; i. Basic understanding of GD&T ii. Basic understanding of use of measuring instruments 🚀 Why Join KMM Group? Meaningful Work - Build and inspect parts that power technologies protecting and improving lives Innovation Culture - We live our values: Paid to Think, Make it Fun, Support Each Other, Strive for Excellence, Inspire Passion Team-Driven Environment - Join a group of professionals who value precision, integrity, and impact Career Growth - Expand your technical skillset and shape your career within a forward-thinking organization 🛡️Benefits & Perks Offered: Healthcare: Medical, Prescriptions, Dental Vision Insurance Life & Disability Insurance Supplemental: Health Insurances (Hospital Indemnity, Critical Illness Care, etc. - Paid by Employee Total Wellbeing Programs & Mobile Mental Health Hub Financial Academy Paid Holidays and PTO 401k Plan w/Employer Match Employee Assistance Program (EAP) Professional Development Programs, Education Dedicated Manager of Training Dedicated HR staff to support your needs Benefits related Employee Advocacy Team ***All benefits listed herein are for information purposes and subject to change. NOTE: KMM is an ITAR Registered Facility and thus anyone applying for this role must be a US Citizen or have a valid Green Card. ***Offered Compensation is commensurate with experience. All done! Your application has been successfully submitted! Other jobs

Discover Veranova: At Veranova, we believe people are our most important asset, and we are dedicated to building the most talented workforce in our industry. Our commitment to uncompromising focus on quality, compliance, safety, and excellence in delivery shapes everything we do. We are not just looking for skills; we are seeking innovative individuals who have a mindset open to learning and growth, and a desire to make a difference. Veranova is a global leader in the development and manufacturing of complex active pharmaceutical ingredients (APIs) for pharma and biotech customers. With deep technical expertise and impressive flexibility, we develop solutions and processes that support and accelerate innovation. Join us on our mission to enable current and next-generation therapeutics to improve and save the lives of patients. Role Overview: The Stability Supervisor plays a key role in ensuring our stability program is executed accurately, safely, and in full compliance with internal and regulatory standards. This role supports the QC Manager in driving departmental goals, fostering a culture of continuous improvement, and developing team capabilities. It's an opportunity to make a meaningful impact on quality, reliability, and operational excellence. Core Responsibilities: Assign daily tasks to the stability chemists to meet stability testing schedule. Test stability samples as needed. Maintain safety and quality systems in a state of audit readiness. Works with cross-functional teams (production, quality assurance, regulatory, commercial, project management, etc.) to support product campaigns defining stability requirements. Leads laboratory investigations, identifying root causes and enacting effective CAPAs to improve overall laboratory performance (%RFT). Develops direct reporting chemists through goal setting, performance management with regular review (i.e. 1 on1 meetings). Reviews analytical data as required and writes necessary reports this includes stability summary reports. Executes safety initiatives in the laboratory the maintain and improve work environment. Updates relevant SOPs along with evaluation of current and new equipment or use in the laboratory. Involved with laboratory audits through laboratory walkthroughs responding to auditor request/questions. Implements and applies cGMP concepts in association with department specific responsibilities. Helps QC Manager develop yearly budget and CAPEX plan to support future lab equipment and resource needs. Qualifications: Required Bachelor's degree in chemistry or related science Minimum of 5 years cGMP laboratory experience Minimum of 3 years stability program experience Ability to communicate effectively with impact internally and externally Builds collaborative relationships cross-departmentally Seeks opportunities for continuous improvement Able to make decisions after evaluating current laboratory workload Adaptability due to changing production demands due to customer needs Preferred Proficiency in standard QC laboratory equipment (HPLC, GC, FTIR, UV, KF, etc.) Adept at report writing and root cause analysis Background in data trending Supervisory experience/leading teams Salary Range : $90,000 - $100,000 annual base salary Our Commitment: Health & Wellness: Comprehensive health & wellness benefits. Access to mental health resources and wellness programs. Generous PTO and holiday pay policies. Financial Wellness: Veranova is committed to fair and transparent compensation practices. This includes a competitive base salary, eligibility for performance-based bonuses, and an attractive 401(k) Plan with company match. Salary ranges reflect the scope and expectations of the role, and are based on market data, internal equity, and role-specific factors. Final compensation may vary depending on experience, skills, education, and business needs. Professional Development: Opportunities for continuous learning through LinkedIn Learning, workshops, conferences, and mentorship. Tuition Assistance for Undergraduate and Graduate degree programs. Inclusive Culture: At Veranova, an inclusive culture is integral to our values. We welcome people with diverse experiences and perspectives who share our mission to improve and save lives. Even if you don't meet every qualification, we encourage you to apply. Veterans, first responders, and those transitioning from military to civilian life bring valuable skills that strengthen our team. Additional Information: Applicants for this role must be authorized to work in the United States without further employer sponsorship. Agency and Search Firm Representatives: Veranova does not accept unsolicited resumes from agencies and/or search firms for this job posting. All your information will be kept confidential according to EEO guidelines. Veranova is an Equal Opportunity Employer. It is the policy of Veranova to provide equal employment access and opportunity to all persons regardless of age, race, color, national origin, religion, sex, sexual orientation, gender identity and/or expression, physical or mental disability, genetic information, citizenship, marital status, veteran status, or any other characteristic protected by federal, state, or local law. All applications are carefully considered, and your details will be stored on our secure Application Management System. This is used throughout Veranova for the selection of suitable candidates for our vacancies as they arise. Veranova respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice .

The Co-Op will be responsible for assisting with QC testing of in-process samples and finished products and assist with some quality assurance documentation functions.Primary Duties: Work under the supervision of senior Quality Control Technicians to perform QC testing of raw materials, in-process samples and finished products, and ensure only compliant and quality products are released to our customers. Report nonconforming results to senior lab personnel and Quality Manager, and assist with any follow-up investigations. Complete QC testing data entry, document QC results, generate reports and finalize batch records. Maintain consumables including restocking as necessary and maintenance of samples required in the QC lab to perform QC testing. Assist QA functions as needed with maintenance of internal and external documents, and controlled documentation. Maintains thorough understanding of all specifications, requirements, and procedures and provides input regarding the continuous improvement of each. Minimum Training, Education & Experience: HS Diploma or GED equivalent required Must be an active higher-education student required Preferred Majors: Biomedical, Biomedical Engineering, Health and Science; Nutrition & Foods, Prof. Stud.; Culinary Arts & Sciences, Professional Studies, Culinary Science, Arts & Science, Biological Sciences, Chemistry Minimum time and type experience required for this position. Beginner - Limited or no previous work experience/first Co-op Intermediate - Some related work or volunteer experience/second Co-op Advanced - Previous related work experience/final Co-op Knowledge, Skills & Abilities: Able to work in a dynamic, multi-tasking and cross-functional environment Must be able to perform basic microbiological/chemical functions like micro-pipetting, etc. Team-oriented and pro-active attitude; ability to communicate and interact effectively with management as well as lab personnel. Good organizational skills with keen attention to details. Ability to exercise good judgment within defined procedures and to recognize deviation from accepted practices Good computer skills, including; MS Word and Excel Good oral and written communication skills in English. The wage for this role based in Pennsylvania is $17.00. This role is eligible to receive a variable annual bonus based on company, team, and individual performance per bio Merieux's bonus program. This range may differ from ranges offered for similar positions elsewhere in the country given differences in cost of living. Actual compensation within this range is determined based on the successful candidate's experience and will be presented in writing at the time of the offer.In addition, bio Merieux offers a competitive Total Rewards package that may include: A choice of medical (including prescription), dental, and vision plans providing nationwide coverage and telemedicine options Company-Provided Life and Accidental Death Insurance Short and Long-Term Disability Insurance Retirement Plan including a generous non-discretionary employer contribution and employer match. Adoption Assistance Wellness Programs Employee Assistance Program Commuter Benefits Various voluntary benefit offerings Discount programs Parental leaves Please be aware that recruitment related scams are on the rise. Fraudulent job postings are being placed on other websites, and individuals posing as bio Merieux Talent Acquisition team members are reaching out via email or text message in an attempt to collect your personal and confidential information. In some cases, these scammers are also conducting bogus interviews prior to extending fraudulent offers of employment. Beware of individuals reaching out using general phone numbers and non-bio Merieux email domains (i.e. Hotmail.com, Gmail.com, Yahoo.com, etc.). If you are concerned that an interview experience or offer of employment might be a scam, please make sure you are searching for the posting on our careers site or contact us at [emailprotected]. BioMerieux Inc. and its affiliates are Equal Opportunity/Affirmative Action Employers. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Please be advised that the receipt of satisfactory responses to reference requests and the provision of satisfactory proof of an applicant's identity and legal authorization to work in the United States are required of all new hires. Any misrepresentation, falsification, or material omission may result in the failure to receive an offer, the retraction of an offer, or if already hired, dismissal. If you are a qualified individual with a disability, you may request a reasonable accommodation in BioMerieux's or its affiliates' application process by contacting us via telephone at , by email at [emailprotected], or by dialing 711 for access to Telecommunications Relay Services (TRS).