Quality technician jobs in Canton, MI

Harvard Resource Solutions is hiring a MANUFACTURING TECHNICIAN to provide support for manufacturing operations in Macomb Township, MI. POSITION TYPE: Full time. Direct Hire. Day Shift: 6:45 AM to 3:15 PM. Immediate work. PAY: $25.00 to $28.00 per hour based on skills and years of experience Skills and experience needed for the Manufacturing Technician: 3 years hands on experience with plastic injection molding. Strong troubleshooting qualities with data driven results. Low Voltage DC Electrical experience. Have some PLC programming knowledge and Controls experience. Hands-on technical skills with robotics, automation and secondary equipment. Ability to read and interpret engineering drawings, prints and schematics. Effective communication and collaboration skills with cross-functional teams. Commitment to safety, quality and continuous improvement. Ability to use CAD for fixture and process-related design work. Ability to operate machine tools as required for secondary equipment. Ability to use Excel, Word and PowerPoint. Duties of the Manufacturing Technician: Responsible for setting up, reviewing, adjusting, and troubleshooting automation and secondary equipment. Operate, monitor, and maintain manufacturing equipment and machinery. Perform mechanical or electronic assembly following blueprints, schematics, and work instructions. Establish, document, and refine processes to ensure safe, efficient, and repeatable production. Implement changes to processes or changes to equipment to improve efficiency, quality and safety. Halt any production run that creates an unsafe condition or is producing out of specification parts. To ensure work instructions, process documentation and setup sheets are accurate, complete and accessible. Verify technical data, CAD files, and engineering drawings for manufacturability and adherence to specifications. Participate as required in product, tooling and secondary equipment design reviews to ensure manufacturability. Support Mfg. Engineers and Program Managers. Ensure needed supplies are maintained and re-ordered. Benefits Include: Medical, Dental and Vision Insurance. 11 Paid Holidays. Short -Term & Long -Term Disability, Vacation time, Personal time annd 401K plan

We are seeking a highly skilled Production Quality Engineer with deep knowledge of Surface Mount Technology (SMT) and product assembly processes. The ideal candidate will work closely with manufacturing facilities to ensure product quality, drive process improvements, and resolve production issues. This role requires hands-on experience in electronics manufacturing, problem-solving skills, and the ability to collaborate across cross-functional teams. Key Responsibilities: Serve as the primary quality interface for manufacturing facilities, ensuring adherence to product specifications and quality standards. Develop, implement, and maintain quality control plans, inspection procedures, and process audits for SMT lines and assembly operations. Monitor SMT process parameters including solder paste application, pick-and-place accuracy, reflow profiles, and component placement to optimize yield. Analyze production data, identify trends, and drive continuous process improvements to reduce defects and enhance product reliability. Investigate and resolve quality issues related to SMT and assembly processes, including root cause analysis and corrective/preventive actions (CAPA). Support new product introductions (NPI) by providing input on manufacturability, process capability, and quality requirements. Collaborate with suppliers, engineering, and production teams to ensure component quality and process consistency. Maintain compliance with industry standards (IPC, ISO 9001, IATF 16949) and internal quality guidelines. Train manufacturing personnel on quality standards, inspection techniques, and best practices. Participate in audits, inspections, and quality reporting activities to senior management. Required Qualifications: Bachelor's degree in Electrical, Electronics, Mechanical, or Manufacturing Engineering. 5+ years of experience in electronics manufacturing, specifically SMT and product assembly. Strong understanding of SMT processes: solder paste printing, pick-and-place, reflow soldering, wave soldering, inspection (AOI, X-ray, visual). Hands-on experience with quality tools and methodologies: FMEA, SPC, Root Cause Analysis, 8D, Six Sigma principles. Familiarity with electronic components, PCBA assembly, and testing. Strong analytical, problem-solving, and troubleshooting skills. Excellent communication skills and ability to work collaboratively across teams. Experience with ERP/MES systems, quality management software, and reporting tools is a plus.

Your tasks Coordinate incoming inspection activities. Request corrective actions to the supplier and follow up in the time requested. Coordinate and lead problem solving projects for customer and internal issues. Ensure “Recovery Cost” in time to quality issues with suppliers and “0KM Cost” from customers. Coordination of movements of raw materials and finished goods at quarantine. Interaction with Customer Team Q.E. or ZQU to ensure quality requirements through the methodical use of Lessons Learned, PFMEA, Capability Studies, Poka-Yokes. Maintain continual communication with vendors, internal and external customer ensuring immediate resolution of issues. Regular update SAP QIM system, generate failure cost reports and provide information on any relevant topics to top management regarding customer and/or supplier issues. PPAP updates for suppliers and customers. Ability to navigate and evaluate GECOS in SAP. Create training documents on SAP Quality Module and train new Quality Engineers on SAP QM processes (Complaint management, Quality Planning, Failure costs, etc.). Other duties assigned by Manager/Supervisor. Your Profile Minimum of 5 years professional experience in quality, ideally at least 3 years in a manufacturing quality related position in the automotive industry Minimum of 3 years of professional experience interfacing with OEM(s) and suppliers

Quality Technician

At AAM, the POWER is in our people. We believe that an equitable and inclusive workplace benefits everyone, and that the diversity of our Associates drives creativity and innovation. Our global team is made of dreamers, doers and innovators who are Delivering POWER for a safer, brighter and more sustainable tomorrow. Job Posting Title Quality Tech Summary The successful Coordinate Measuring Machine (CMM) Programmer is one that is conscientious, detail orientated, and a self-starter able to work from a verbal or written instruction. They are committed to quality, precision, and timeliness in their deliverables. These deliverables are achieved while maintaining a safe and organized working environment. Job Description Final and in process inspection of tooling, components, and prototype parts using CMM and various gauges as required Ability to program and operate Zeiss CMM using Calypso software Ability to read blueprints and understand product specifications and requirements Ability to perform measurements of precision components to ensure specifications are met Ability to perform general shop math Ability to measure close tolerances Completion of customer inspection reports per instructions and requirements Performs preventive maintenance tasks as required Required Skills and Education High School Diploma About AAM: As a leading global Tier 1 Automotive and Mobility Supplier, AAM designs, engineers and manufactures Driveline and Metal Forming technologies to support electric, hybrid and internal combustion vehicles. Headquartered in Detroit with over 80 facilities in 18 countries, we are Bringing the Future Faster for a safer and more sustainable tomorrow. To learn more, visit AAM.com. Why Join #TeamAAM: As a member of #TeamAAM, you'll get to make a difference on day one. From your first day with us, you'll have the opportunity to grow, embrace challenges, build your skills, and bring your authentic self to work every day, all while helping to shape the future of mobility for AAM…and the world. AAM will not discriminate against any Associate or applicant for employment because of age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. AAM will take affirmative action to ensure that applicants are employed, and that Associates are treated equally during employment, without regard to their age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. For the Disabled Job Seeker: We offer reasonable accommodations for qualified disabled individuals who are applicants for employment. To request assistance or accommodations, please e-mail *************************. AAM is an equal opportunity/affirmative action employer.

Job Title: Quality Inspector Technician Job Summary:The Quality Inspector Technician is responsible for ensuring that products and processes meet defined quality standards. This role involves inspecting, testing, and measuring materials and products, identifying defects or deviations, and working closely with production and engineering teams to ensure continuous improvement and compliance with company and regulatory standards. Key Responsibilities: Perform inspections of incoming materials, in-process components Finished products using measuring tools and visual checks Interpret engineering drawings, blueprints, and technical documents to verify product conformance Use tools such as calipers, micrometers, gauges, and CMM (Coordinate Measuring Machine) Document inspection results and maintain accurate records in accordance with quality standards Identify, report, and help investigate non-conformities or defects Support root cause analysis and corrective/preventive actions (CAPA) Ensure compliance with ISO, FDA, or other industry standards (as applicable) Communicate quality issues to relevant departments for resolution Participate in internal audits and continuous improvement initiatives Maintain a clean and organized inspection area in line with safety standards Requirements: High school diploma or GED; technical training or associate's degree is a plus 2+ years of experience in a quality inspection or manufacturing environment Proficient in the use of inspection tools and equipment Basic understanding of quality control procedures and statistical methods Ability to read technical drawings and specifications Strong attention to detail and documentation skills Familiarity with quality standards such as ISO 9001, AS9100, or similar Good verbal and written communication skills Ability to work independently and as part of a team Preferred Qualifications: Experience with GD&T (Geometric Dimensioning & Tolerancing) Knowledge of SPC (Statistical Process Control) Previous use of quality software (e.g., Minitab, QMS systems) Experience in manufacturing and aerospace Shift: 1st shift Pay: $19-22 an hour-based on experience About Cardinal Staffing Services:Cardinal Staffing Services, Inc. has over 25 years of experience being recognized as leaders in the staffing industry. Founded in Port Clinton, Ohio in 1994, we have grown and expanded into 5 states with 11 offices, delivering custom staffing and recruiting solutions to diverse markets. We leverage technologies, tools, and human connections to create the perfect environments to link employers and employees.We understand that finding the right job is about more than just a paycheck - it's about finding the opportunity that fits your skills, goals, and lifestyle. Here are the benefits you'll enjoy when you partner with us: Access to a wide range of job opportunities Competitive pay Health and Wellness Programs (including EAP) Medical benefits including medical, vision, dental, and prescriptions Electronic weekly pay Employee Advocacy & Personalized Job Support Cardinal Staffing also follows all applicable state and local laws regarding sick time, paid time off, and retirement savings programs. Cardinal Staffing is an equal opportunity employer.Our commitment to speed-to-hire means we work efficiently to get you placed in the right role, fast. If you're ready to take control of your career, explore exciting opportunities, and gain experience that lasts, then Cardinal Staffing is the place for you. Let's get started today! #IND1

Job Title: Quality Technician - Injection Molding Company: Atomic Industries Reports To: Quality Manager Atomic Industries is reinventing how the world makes things. From cars and aerospace systems to medical devices and packaging, most physical goods begin life in a mold or are shaped by a manufacturing tool. Producing these tools has always been slow, manual, and dependent on scarce expertise, taking weeks or months. We're changing that. At our Detroit headquarters, we combine the industrial DNA of America's manufacturing heartland with the speed, intelligence, and precision of Silicon Valley. Our AI-driven platform tackles the hardest problems in geometry, process planning, and fabrication, collapsing production timelines from months to days and soon, minutes. We don't just build software; we run a fully operational factory where our technology produces production-grade tooling every week, enabling tight feedback loops and rapid iteration. Backed by top-tier investors, we're restoring speed, flexibility, and capability to the American industrial base. Our mission is to make manufacturing as agile and scalable as the digital world, and in doing so, rebuild the infrastructure of the physical economy. Position Overview We're seeking a detail-oriented and dependable Quality Technician to support quality control and inspection across our injection molding operations. You'll be on the floor inspecting parts, maintaining records, and working closely with process engineers and toolmakers to ensure every part meets Atomic's exacting standards. This is a key hands-on role as we scale high-volume production and build out our ISO-compliant quality systems. Key Responsibilities Perform visual and dimensional inspections of molded parts (first piece, in-process, and final) Use precision measuring tools (calipers, micrometers, height gauges, etc.) Assist with part qualification processes: FAI, PPAP, capability studies Record and maintain accurate inspection data and non-conformance reports Support containment, root cause analysis, and corrective actions Calibrate and maintain inspection tools per Atomic's calibration program Collaborate with operators, engineers, and quality manager on continuous improvement Follow and enforce safety and cleanliness standards on the shop floor Qualifications 2+ years of experience in a quality role in injection molding or precision manufacturing Proficient in reading technical drawings and GD&T Familiar with ISO 9001 quality systems and basic quality documentation Strong attention to detail and documentation discipline Comfortable using Microsoft Excel, Google Sheets, and quality tracking systems Bonus: experience with digital inspection equipment (CMM, vision systems) Work Environment Fast-paced, collaborative production floor Hands-on engagement with operators, engineers, and software teams Opportunity to grow into Quality Engineering or leadership roles as Atomic scales What You'll Get Competitive pay, benefits, and equity opportunity Exposure to next-gen manufacturing systems A seat at the table in building quality systems from the ground up

Responsible for Day-to-Day Quality activities and inspection operations, quality data requirements, and customer special measurement, reporting, or record requirements. Assist in the decision-making process regarding measurement or gaging of product characteristics, inspection planning, and/or reporting. Responsible for the calibration system and related documentation. Reports to the Quality Manager in matters of technical authority and responsibility. Rotate duties from each quality area to become proficient, and maintain proficiencies in all areas. Principle Responsibilities Uphold quality standards, concepts, practices and maintain customer satisfaction Assist in the development of processes to ensure quality requirements have been satisfied Identify, document and report non-conforming products or workmanship Maintain rework and scrap operating metrics Maintain staging and holding areas for inspection and non-conforming products respectively Calibration of inspection and measurement equipment using established guidelines Perform incoming receiving inspection on purchased special and standard components Perform PPAP analyses on incoming products Other tasks as deemed necessary by the Quality Manager Skills Required Basic computer and CAD knowledge Familiarity with the use of precision measuring equipment such as micrometers, calipers, height gage, optical comparator, hardness testers, surface finish tester, and CMM (open DMIS) Able to read blueprints and interpret G.D. & T. Understanding of ISO-9001:2015 standard Well organized Attentive to detail Strong communication skills. Proficient with Microsoft Office and ERP systems Education High school graduate or equivalent. Associates degree in Metrology and Calibration or similar technical field desired but not essential. Work Experience 2 - 5 years or more of related experience. Privacy Notice for California Residents P.C.S. Company (“PCS”) complies with the California Consumer Privacy Act (“CCPA”), California Privacy Rights Act (“CPRA”), and other applicable privacy laws. We may collect the following categories of personal information for purposes of the application and hiring process: name and contact information (phone number; mailing address; email address(es)); education and qualifications; employment history and experience; LinkedIn profile; and other information voluntarily provided by the applicant. Under the CCPA and CPRA, California residents have the right to know, correct, delete, and/or limit the use of certain information collected by PCS. For further information, see our full privacy policy at PCS Company - Privacy Notice for California Residents (pcs-company.com). If you have any concerns, please send an email to ******************.

Our mission is to identify and deliver the world's most innovative industrial solutions. We provide superior service, local expertise, and a high degree of responsiveness to empower our customers to be more productive, build a better-quality product, and maintain a safe environment for their workers. Job Description: The Quality Technician is responsible for performing inspections, tests, and audits to ensure products and processes meet established quality standards. This role works closely with production, engineering, and operations teams to identify nonconformities, assist in root cause analysis, and support continuous improvement initiatives. Key Responsibilities: · Perform incoming, in-process, and final inspections on parts, assemblies, and finished products. · Verify products meet specifications by using precision measuring instruments (calipers, micrometers, gauges, etc.). · Document inspection results, maintain quality records, and prepare reports. · Assist in root cause analysis and corrective/preventive action activities. · Support calibration and maintenance of inspection tools and equipment. · Ensure compliance with company procedures, ISO standards, and customer requirements. · Collaborate with production teams to resolve quality issues in a timely manner. · Participate in continuous improvement, 5S, and lean manufacturing initiatives. · Escalate quality concerns and recommend improvements to reduce defects and scrap. Qualifications: · High school diploma or equivalent required; technical certification or associate degree preferred. · 1-3 years of experience in quality inspection or quality assurance within manufacturing or industrial environments. · Knowledge of ISO standards, quality systems, and inspection processes. · Proficient in using measurement tools (calipers, micrometers, height gauges, etc.). · Basic understanding of engineering drawings, GD&T, and specifications. · Strong attention to detail, accuracy, and problem-solving skills. · Proficiency with Microsoft Office; experience with ERP/QMS software a plus. · Strong communication and teamwork abilities. Physical Requirements: · Ability to stand, walk, bend, sit, and lift up to 50 lbs. as needed. · Comfortable operating forklifts, pallet jacks, and other warehouse equipment. · Work in a manufacturing / warehouse environment with varying temperatures and noise levels.

As a Quality Technician, you have the understanding of and will perform intermediate SAP transactions, possess the technical knowledge to complete quality checks on multiple lines or areas in a department or site, depending on the size of facility, you may actively trains associates in the Quality Technician role and/or others, demonstrates the interpersonal skills needed to transfer job knowledge to trainees, will be a contributing member of the Internal Audit team. You Will · Be capable of Testing Product: o May create new product in SAP test plan o Conduct qualifications o Comprehends PPK, trends, runs, etc. o Create 1st article in SAP o Completes all measurement requirements per package o Identifies out of spec and out of control data o Uses all required testing equipment properly · Understand basic SAP/Iconics Transactions: o May modify test plans, including specs and test frequency o Comprehends PPK, trends, runs, etc. o Scrap heldware through SAP o Enter SPC data in SAP o Enter Near Miss/1 on 1 and Find It Fix It o Create shift reports o Basic understanding of Excel and other Office tools · Monitor Product Parameters o Review critical product charts beyond daily testing o Identify invalid data o Review product charts during daily testing · Handle Non-Conforming Product: o Place product on hold in multiple bins, including outside warehouse and bins that aren't the 210 hold o Correct heldware inventory discrepancies with the help of warehouse o Audit till defect free o Use Target, Acceptable, Marginal, Unacceptable inspections (TAMU)'s to identify visual defects · Resolve equipment issues and make minor adjustments: o Troubleshoot most issues on testing equipment, including the hot filler o Work with maintenance as needed to get equipment running o Identify when quality equipment isn't working correctly o Basic troubleshooting ability to get quality equipment operational · Participate in other aspects of the Quality Management System: o Conducts mock recalls with limited help o Conducts calibration on most equipment and works directly with vendor for external service o Understands the basics of a mock recall o Understands the basics of calibration · Miscellaneous duties as assigned o Capable of training quality You Have · Ability to work 12-hour rotational shift 7:48ampm - 8:00am (2B) · High School Diploma, GED, or equivalent · Minimum of one to three year(s) of related experience · Working knowledge of quality control methods & approaches · Superior attention to detail · Ability to walk & stand on production floor throughout work shift with or without a reasonable accommodation As a Plastipak Associate, you receive a benefits package offering the following: Wellness Programs Health Insurance Coverage, including Medical, Dental & Vision EAP, Employee Assistance Program Life Insurance Accidental Death & Dismemberment Insurance Disability Insurance: Short-Term & Long-Term Accidental Insurance Critical Illness Insurance Hospital Indemnity Insurance 401(k) Plan, with Company Matching Contribution & Profit Sharing feature Paid Time Off - 80 hours within 1st year & subsequent increases Paid Company Holidays Dependent Care Flexible Spending Account Caregiving via Care.com Pet Insurance Tuition Assistance Program Sons and Daughters Scholarship Program Travel Assistance Employee Discount Programs *Some benefits are subject to eligibility requirements Plastipak is an Equal Opportunity Employer In order to process your job application, Plastipak collects and stores the personal information that you submit via this website. Please refer to Plastipak's to understand how Plastipak uses and protects the information that you provide.

Quality techs are needed at a brand new Automotive facility in Lake Orion. . You have to be able to use measuring devices like micrometers and calipers, gage the parts, report them and make sure production is running smoothly. At least 1 year of experience. Split shift and afternoon shift available. 1:30pm-10pm Monday-Friday at $18/hr Respond to this add or call ************.

QUALITY TECHNICIAN 2nd SHIFT 2:30 PM - 11:00 PM MISSION To create new value, excite and delight our customers through the best automotive products and services. We value integrity, customer focus, creativity, with efficient and nimble actions and respect highly motivated people with team spirit. JOB SUMMARY: Support manufacturing by guiding, training, and covering floor receiving, shipping, and manufacturing activities to reduce customer exposure and excessive internal waste. ESSENTIAL FUNCTIONS: Supports manufacturing validation, and verification of product quality standards. Reviews daily shutdown / stop notices and reports trends / further actions as appropriate. Participates and leads floor audit activities and action plans. Verify equipment used for part validation is appropriate for use. CONTROL OF NON-CONFORMING PRODUCT: Monitors sort/rework activities and confirms product is identified during all stages and records are maintained. Trains sort staff and audits sort activities to validate effectiveness FINAL AUDIT: Performs sampling audit on all shipments, and maintains shipment audit records Verifies that containers are identified correctly Assures that suspect material is identified and placed in the designated quarantine area to prevent shipment EDUCATION AND EXPERIENCE: Minimum of 2 years of manufacturing quality experience. Quality systems experience or training required. Basic computer skills and required. Previous experience using Plex software preferred. Job Type: Full-time Benefits: 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Referral program Vision insurance Schedule: 8 hour shift Day shift Monday to Friday Weekends as needed Experience: Quality: 2 years (Required) Stamping: 3 years (Required) Plex: 2 years (Preferred) Shift availability: 2 nd Shift (Required)

Job Description Come join a growing company in the automotive field! MARTIN Technologies is hiring Quality Inspection Technicians at our facility in Toledo, OH. This is a wonderful career opportunity for anyone looking to be a part of the automotive world. We hire a diverse staff, so even if you have been out of the workforce for some time, you are welcome to apply. We provide all training! We have positions available for entry-level through experienced technicians. Pay and job placement dependent on experience. Openings on Day and Afternoon shifts. Overtime opportunities available. Job Duties: Our Quality Inspection Technicians inspect and sort automotive parts into complying and non-complying categories. Employees use visual and measured inspection of automotive transmission components to make sure the parts meet quality standards. This is a warehouse setting, with candidates having to stand and walk for extended periods of time. Responsibilities: Report each day on time Follow verbal and written instructions Perform product quality inspections to identify defects Ensure products meet customer specifications per work instructions Work with a sense of urgency Use basic measurement and hand tools as required Keep record of daily tasks Qualifications: Analytical, logical thought process and meticulous attention to detail Ability to visually determine if it a part meets identified criteria (color, shape, size, other) Strong work ethic and a positive attitude Must be able to stand for 8 hours and lift 20 lbs. Must have reliable transportation. Full time position with benefits. MARTIN Technologies is a full-service, global engineering and manufacturing company with capabilities in the automotive, marine, aerospace, and defense industries. From our beginnings in Motorsports (1996) we have experienced steady growth in the transportation industry. We excel with innovative methods and best practices supporting the world's best customers. Our global experience in Electrification, Autonomous, and new technologies create an exciting and diverse environment for our team. ******************** Powered by JazzHR cZ0FaMS1wH

Our company specializes in manufacturing re-usable plastic packaging and is a leader in the thermoforming industry. We are currently looking for motivated individuals to join our team as a Quality Technician. Quality Technicians are in responsible for supporting the Quality Manager and production team to ensure parts are made to customer specifications. Technicians will utilize the MES to record their testing. Reports to: Quality Manager Shift: 3:30 PM - 2:00 AM Monday - Thursday Responsibilities: Assist Quality Assurance and Production staff by providing expertise to resolve quality issues Inspect and validate incoming parts from external companies Use hand tools such as tape measure and micrometers to inspect and test internally produced components/parts to ensure quality and system requirements are met Understand quality tolerance and GD&T Qualifications: Previous experience a quality position Strong Computer Skills Strong Organization Skills Familiarity with plant tools and equipment Strong troubleshooting and critical thinking skills Ability to Lift up to 50 pounds Ability to stand for 8+ hours Ability to thrive in a fast-paced environment Benefits: Starting pay: $19.00/hr plus .75 shift premium Health, Dental, Vision, Life Insurance after 60 days 401k with 50% employer match up to 6% after 90 days Paid Time Off, Holiday Pay, Paid Sick Leave Career advancement opportunities

Quality Technician Shift: 1st, 2nd, 3rd The Quality Technician uses specialized tools, skillsets, software and other implements to carry out quality activities at the direction of the quality supervisor. Technical activities like gaging parts, analyzing process capability/statistical process control data and controlling documents, gages and other vital records are just a few examples of what falls within the purview of the quality technician. ESSENTIAL FUNCTIONS: Collects, records, and disseminates data and information specific to quality functions such as Layered Process Audits, Document Control, Gage R&R and similar Responsible for updating production floor documents with performance data and distributing revised documents to the appropriate work centers/areas Coordinates with external vendors and suppliers for quality related activities such as calibration services, acquisition of certified standards, and other tasks as deemed necessary Assists in root cause analysis, corrective/preventative action implementation and identifying general continuous improvement opportunities within the scope of their responsibilities 5% Local travel; approximate 20-mile radius Additional duties with similar responsibilities may be assigned as necessary Requirements PHYSICAL DEMANDS/ENVIRONMENTAL CONDITIONS: The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Able to stand/walk for the duration of shift (8+ hours) Able to lift up to 40lbs unassisted Able to perform frequent repetitive motions Able to withstand noisy environment Work station is in a shared and open environment TRAVEL REQUIREMENTS: 5% Local travel; approximate 20-mile radius EMPLOYMENT REQUIREMENTS: High school diploma or GED 3-5 years experience higher level of self-motivation and practical competence in the areas and activities for which they are responsible An intermediate understanding of quality standards, documentation and practices is also required Depending on the duties assigned, familiarity with specialized software such as Access, Minitab, Gage Track, QAD and others may also be necessary Reliable transportation Proficient in Microsoft Office Suite Able to read, write and speak English

Job Description Coplas Inc. an affiliate of Tiercon Corp. is an automotive supplier committed to the design, manufacture and assembly of quality exterior trim and assembled systems used as original equipment in the automotive market. Headquartered in Sterling Heights Michigan, Coplas employs approximately 50 employees. Coplas is seeking knowledgeable, self-directed, experienced and hardworking individuals interested in the automotive industry as a Quality Technician. Job Summary & Reporting Structure: Reporting to the Assistant Quality Manager or designate, the Quality Team Leader is responsible for ensuring quality requirements on the production floor are met. They will be responsible for maintaining workflows in production by monitoring steps of the process; training production employees, correcting quality concerns and at all times ensuring the ongoing adherence to the policies and procedures outlined in the ISO9001:2015 AND IATF 16949 Quality System and encouraging continuous improvement wherever possible. Responsibilities: Responsible for the quality of products in accordance with Company Quality Policy and Objectives Perform duties that reflect compliance to Company's Quality Management System (QMS) as recorded in the organization's Quality Manual Participate in PPAP, PFMEA, Control Plans and Gauge R&R Demonstrate conformance to regulations recorded in supplied Employee Handbook Perform quality inspection duties (first/last off, in process inspections) Train new and existing employees Maintain all controlled document files and test records in a timely and accurate manner Visually inspect produced parts for defects and reports flaws immediately to management Measure and check fixtures, record data in spreadsheets. Perform data analysis to ensure accuracy of production requirements. Disposition nonconforming parts into appropriate container to prevent contamination of finished goods Detect and report machine malfunctions promptly to management and immediately notify Supervisor or Quality of all discrepancies to established quality checks (ie, sample boards, inspection instructions, Quality Alerts, etc.) Package and transports produced parts as needed Participate in team problem solving activities (ie, 8D's, communication meetings, etc.) Responsible for following all internal and OSHA required safety procedures Resolve problems by analyzing data, investigate issues, identify solutions, recommend corrective action in accordance with continuous improvement initiatives Track and submits statistics on the cost of poor quality Track performance of layered audits (e.g. track number of audits completed) Troubleshoot equipment problems to ensure quality and efficiency Able to stand for long periods and lift up to 45 pounds Promote continuous improvement in all areas Other duties as assigned ISO9001:2015 AND IATF 16949 duties as required Qualifications: Demonstrated working knowledge in PPAP, PFMEA, Control Plan & Gauge R&R High School Diploma or Equivalent work experience at minimum 2 years prior work experience in plastics or automotive industry is an asset Manufacturing experience Supervision experience an asset Training Effective communication skills, verbal, and written Computer skills data analysis Ability to using various measurement techniques Strong prioritization skills Manual dexterity skills Good attention to detail Coplas Inc. is proud to be an inclusive and equal opportunity employer. At Coplas we are committed to ensuring the workplace is free from discrimination. Coplas welcomes and encourages applications from everyone including persons with disabilities. During our hiring process, we will notify job applicants that accommodations are available upon request. If a selected job applicant requests accommodation, Coplas will consult with the individual and provide or arrange for the appropriate accommodation taking into account the applicant's disability-related needs. Please contact Tiercon Human Resources at **************. The Prevue ATS uses AI technology to match candidates to job opportunities. Please see the Terms of Service for full details

Job DescriptionDescription: The Quality Technician supports the company's quality assurance and continuous improvement processes by performing inspections, maintaining documentation, and ensuring compliance with customer and company standards. This role is responsible for executing quality control activities, managing nonconformance documentation, and providing accurate data to support production and customer satisfaction. Requirements: Responsibilities: Input and maintain records for Nonconformances (NCs), Return Material Authorizations (RMAs), and Vendor Returns (VRs) in the quality system. Support communication with customers regarding quality issues, corrective actions, and compliance status. Review and validate orders for compliance with customer terms, specifications, and quality requirements. Operate and program Coordinate Measuring Machines (CMMs) to inspect components and verify conformance to specifications. Perform and record gage calibration and verification activities to ensure measurement accuracy and compliance. Participate in internal audits to verify adherence to ISO and company quality standards; document findings and support corrective actions. Create and maintain balloon drawings, inspection plans, and test documentation for production and quality processes. Assist in identifying opportunities to improve processes, reduce defects, and strengthen quality systems. Support Quality Inspectors by assisting with daily inspection activities and cross-train to perform inspection duties as needed. Other duties as assigned Qualifications: Associate degree or technical certification in Quality, Manufacturing, Engineering, or a related field preferred. 2+ years of experience in a manufacturing quality or inspection role. Working knowledge of CMM operation and metrology principles. Familiarity with ISO 9001 or other quality management systems. Proficient in Microsoft Office and quality software systems (ERP, QMS). Strong attention to detail, organization, and communication skills.

Job DescriptionOverview: Candidate will validate that components and product meet established standards and requirements. Perform basic measurements using measurement equipment. Duties and Responsibilities: Job Preparation and Set-up. Read Blue Prints & understands GD&T symbols. Accurately recognize datum scheme & function. Understands CMM machine operation and can program. Formatting Layout Reports in MS Excel Preparation of data and reports Perform basic analysis of specifications Review products for physical and technical acceptance Interprets engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality and reliability standards Recommends improvements to the system Preferred Qualifications: High school diploma combined with 2 years of CMM experience required Experience using software - CMM Manager 3.3SP1, Mcosmos 3.5, and Calypso 5.2 or higher Benefits: Health Insurance Dental Insurance Prescription Vision 401K + Company match Life Insurance Short Term Disability Long Term Disability Education Assistance Flex Spending Employee Assistance Programs 12 Paid Holidays Paid Time Off TAC Manufacturing, Inc. is a Japanese owned automotive parts supplier, serving the Japanese Transplants (Toyota, Nissan, Subaru, etc.) as well as the domestic OEMs (Ford and GM). Located in Jackson, MI, TAC Manufacturing, Inc. is a subsidiary company of Tokai-Rika Co. LTD, which is located in Nagoya, Japan. TAC was founded in 1991 and currently employs 700+ people at our Jackson, MI location. We manufacture security and safety-related products: shift levers, shift-by-wire, steering wheels, exterior mirrors, steering column locks, key cylinders, mechanical and remote keys, and more. Shift your career into drive and help TAC Manufacturing make the driving experience an intuitive connection between the human body and the vehicle. TAC Manufacturing, Inc. is an Equal Opportunity Employer. #tac

We are looking for an experienced Quality Engineer to support production quality in our electronics and assembly operations. This role focuses on improving process performance, reducing defects, supporting new product launches, and ensuring compliance with customer and industry standards. Key Responsibilities Production Quality Monitor and improve quality performance across SMT, soldering, and assembly lines. Perform process and product audits to ensure adherence to standards and work instructions. Track and report KPIs such as scrap, defects, and non-conformance trends. Lead root cause analysis and corrective actions (5Why, 8D, Ishikawa). Continuous Improvement Drive scrap reduction, yield improvement, and process optimization initiatives. Lead cross-functional projects focused on cost savings and productivity. Improve inspection methods, standard work, and quality tools. Customer & Internal Support Resolve customer quality issues with structured problem-solving. Support customer audits and investigations. Work with APQP/Program teams on quality deliverables for current production and new launches. New Product Launch Support PPAP, control plans, PFMEA updates, and process validation. Ensure readiness and smooth integration of new products into production. Team Collaboration Work closely with production, engineering, and maintenance to stabilize processes. Train operators, inspectors, and technicians on quality standards and best practices. Qualifications Education Bachelor's degree in Mechanical, Industrial, Mechatronics, or related field. MBA is a bonus but not required. Experience 5+ years in manufacturing or production quality (electronics/automotive preferred). Hands-on experience with SMT, soldering, assembly, or related processes. Proven experience in scrap reduction, audits, problem-solving, and process improvement. Preferred Certifications IATF 16949 or VDA 6.3 Auditor CQI (15/17), IPC-A-610, J-STD-001 GD&T (ASME Y14.5) APQP/PPAP/PFMEA knowledge