Quality technician jobs in Cheektowaga, NY - 107 jobs

Starting pay is $23.40/hour (plus shift differential, if applicable). Year 2 = $26.74 Year 3 = $28.41 Year 4 = $33.43 First year: $70K+ with overtime. Wage progression over 3 years to a max of $33.43+/hr. With overtime up to $85K+ / year Excellent wages, benefits and product discounts. REPORTS TO: Area Leader/Team Leader SUMMARY: Work in a variety of areas, operating high-speed manufacturing production equipment in processing and packaging to produce Milk-Bone product for the company. KEY RESPONSIBILITIES * Positions are afternoons and evenings and shifts can alternate weekly. Assigned shift attendance and weekend work is required. * Follow all company Safety Rules and Good Manufacturing Practices (GMP's). * Produce high quality products in a safe and healthful manner. * Work in all areas of processing and packaging, as assigned, which includes operating, being in close proximity to and crossing platforms over machinery. Cross-training will occur throughout the facility in all aspects of high-speed manufacturing. * Ability to work as part of a team. * Assist fellow employees as needed. QUALIFICATIONS * To perform this job successfully, an individual must be able to perform each duty and responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the duties and functions of the position. * 3+ years related manufacturing experience or equivalent technical/vocational experience preferred. * Selected individuals must have excellent interpersonal and communication skills, be highly motivated and responsible, and work well within a team environment. * Use of computers and PLCs in an industrial manufacturing environment is preferred. EDUCATION and/or EXPERIENCE High-school degree or equivalent is required. Associate degree preferred. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, GMP's and general instructions. Good communication skills are required. REASONING ABILITY Ability to apply common sense understanding to carry out both oral and written instructions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions and duties of this job. Reasonable accommodations may be made to enable individuals with disabilities. * While performing the duties of this job, the employee is regularly required to stand and lift. The employee is required to stand and walk at minimum 70% of the time. * The employee must be able to work 8-hour shifts with a maximum of 16 hours required. * The employees must be able to lift fifty (50) pounds. * The employee must be able to squat or kneel and to bend on a frequent basis. * The employee must be able to work in a cold and hot environment. * The employee must be able to tolerate exposure to flour and yeast materials. * The employee must be able to climb steps on a frequent basis. SAFE PERFORMANCE REQUIREMENTS Employee must have the ability to perform the essential job functions identified above consistent with safety standards and practices with or without a reasonable accommodation. WORK ENVIRONMENT The work environments characteristics described here are representative of those an employee encounters while performing the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is located in a bakery which is a high temperature environment, especially in the summer months. This position requires you to spend the majority of your shift on your feet and walking. This position is in a loud noise environment and requires the use of hearing protection and other personal protective equipment. #ZR IND123

Job Purpose Assist with implementing and supporting company standards to ensure quality specifications for packaging, raw ingredients, and finished products are met and food safety of manufactured products is upheld. Monitor and sample quality control plans and process control procedures to ensure production of finished product is to standard. Essential Functions * Perform daily QA walk-throughs; verify GMPs are followed in the facility and set example by practicing correct GMP procedures at all times * Monitor plant operations to ensure sanitary operational procedures are followed according to GMPs * Perform pre-operational inspections, monitoring for food safety and quality * Initiate and complete the hold process for non-conforming product, raw materials, and other materials as required; follow up and complete disposition when determined * Verify batch formulas and product labels ensuring activities are complete and meet specifications * Monitor and verify CCPs/preventive controls as required * Perform equipment calibration as assigned * Perform basic analytical testing * Perform environmental swabbing for bacteria and pathogens; prepare, document, and send swabs to third- party lab as required * Perform environmental and finished product testing for allergens * Collect finished product samples * Collect and record temperature readings * Identify and report food safety issues and assist in conducting investigations into food safety issues, foreign material findings, and customer complaints * Review production records for completion and compliance with good documentation practices * Execute and maintain the document and photo retention process * Serve as a resource to production employees for product quality, food safety, and regulatory issues * Attend shift change meetings to ensure information and any issues are communicated across shifts * Support food safety program, quality standards, and legality of manufactured products * Perform other job-related duties as assigned Qualifications (Education, Experience, Competencies) * Associate's/Bachelor's degree or equivalent work experience * Basic knowledge of general food safety programs and policies including government regulations * HACCP and PCQI certified or willing to become certified * Basic analytical testing knowledge * Basic ability to use instruments/equipment vital to completing duties (e.g., scales, thermometers, metal detectors, calculators, gauges, calipers, rulers, ovens) * Ability to read and understand plant SOPs, work instructions, GMPs, and safety instructions * Operational knowledge of computers and Microsoft Office applications * Basic problem-solving ability * Ability to work independently and as part of a team * Ability to organize, manage multiple priorities, and maintain high attention to detail in a fast-paced environment * Ability to work varied shifts as required California, Illinois, Massachusetts, Minnesota, Washington and New York Residents Only: The hourly range for this role is $21.00 to $23.00 per hour. Pay is based upon several factors including but not limited to local labor markets, education, work experience, certifications, etc. Rise Baking Company complies with all minimum wage laws as applicable. In addition to your hourly wages, Rise Baking Company offers benefits such as, a comprehensive benefits package, quarterly bonus eligibility, incentive and recognition programs and 401k contributions (all benefits are subject to eligibility requirements). At Rise Baking Company, our people are our finest ingredient. An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disabilities. MON123 RISE123

Are you passionate about being part of a Team that will become the most trusted medical device machining service provider? Are you tired of mundane cubicle roles? Join Team Orchard Park as a Quality Technician, state-of-the-art, inspection equipment and realize your full potential as a High Impact member of our Quality team. New employees are eligible for the following benefits effective date of hire! Medical, dental, and vision benefits Company-paid life insurance Generous Paid time off and 10 paid Holidays 401k Plan with Company Match Tuition Reimbursement Attendance Bonus paid monthly GROWTH: This is an outstanding opportunity for a Quality Technician/CMM Programmer that has an attention to detail, thrives in cross-functional teams, and is ready for the next big challenge. You will be working in a highly dynamic work environment that encourages and promotes developmental growth in many areas. MISSION: We collaborate and innovate with our customers to provide the highest quality, life enhancing medical devices in the world. Key Responsibilities: Program, operate and troubleshoot automated inspection equipment, including CMM, Smart Scopes, and VICI systems, to ensure accurate product measurements. Interpret blueprints and technical drawings using GD&T principles. Conduct First Article Inspections. Utilize manual measurement tools (e.g., micrometers, pin gages, ring gages) Conduct root cause investigations for non-conforming equipment or parts. Write, improve, and submit work instructions for review and release to ensure standardized processes. Education, Experience, and Skills: High school diploma 2 - 5 years of experience programming and operating automated inspection equipment (e.g., CMM, Smart Scopes, VICI). Ability to read and assess product drawings Demonstrate understanding of basic Quality System Regulations Working knowledge of Excel and database programs Basic understand of automated systems and programming We offer market competitive compensation. Potential salary range for this role is $25.00-$30.00. Actual pay will be determined based on experience, qualifications, geographic location, and other job-related factors permitted by law. CLICK HERE FOR A SITE TOUR! ** All job offers are contingent on passing a background check and drug test (including THC)

Buffalo News Names Sealing Devices Inc. A Winner of The Metro Buffalo Top Workplaces 2024 Award Statement of Work: Follow all company policies, procedures, and work instructions in the completion of daily activities with minimal input and supervision to ensure successful accomplishment of company objectives. Perform Receiving Inspections to verify that incoming parts, materials, and related documentation meet requirements and are suitable for use. Perform First piece, In-process, Last piece, and Final inspections per sampling plans, product requirements, and job instructions to verify product conformity. Perform First Article Inspections to ensure manufacturing die, tooling, and other manufacturing methods result in product meets customers drawing requirements. Perform customer specific required Inspections and complete Inspection reports per the stated requirements. Document, identify, and segregate nonconforming product in accordance with policies, procedures, and work instructions. Complete and submit customer documentation as required. Document, identify and segregate nonconforming product in accordance with policies, procedures and work instructions. Make requests to suppliers for missing or incorrect documentation. Use appropriate measuring devices and automated inspection equipment to perform inspections including basic programming of automated inspection equipment. Interact with other departments in a professional manner in addressing product quality and service issues. Provide other departments with information and assistance to support them in accomplishing their objectives. Contribute to and participate in improvement activities within the department and the company. Follow departmental procedures and work instructions as written and recommend improvements as necessary. Perform any other task/activity assigned by the supervisor within the scope of Company business. Maintain a safe and clean working environment by complying with policies, guidelines, and regulatory requirements per the Sealing Devices Quality System What you will need to Succeed: High School Graduate or General Education Degree (GED): Required Associate's Degree (two year college or technical school) or Work Equivalent, Field of Study: Industrial Technology or Quality related field Bachelor's Degree (four year college or technical school) Preferred, Field of Study: Industrial Technology or Quality related field Computer Literacy (MS Office), 2 plus years of experience in mechanical inspection and blueprint reading required. Knowledge of GD&T, basic statistical techniques, automated inspection experience preferred. ASQ Certified Quality Technician (CQT) preferred Benefits offered for this role: Medical/Dental/Vision Coverage Health Reimbursement Account (HRA) provided by Company 401K Paid Vacation & Holidays Free Life Insurance for Employee Flex Spending - Medical, Dental, Vision and Child Care Employee Referral Program Company Sponsored Training Profit Sharing - Earn up to 18% of your gross wages after one-year anniversary Free Employee Assistance Program Wellness Programs - Onsite Reflexology, Chair Massage, Nutritional Sessions, Chiropractic Legal Shield and Aflac Employee Recognition Program Company Celebrations - Including: Lunches, Breakfasts, Ice Cream Truck, Holiday Parties Career Advancement Opportunities Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Ability to sit or stand for extended periods of time while performing detailed inspections and working at inspection stations. Regularly required to lift, carry, and move materials or product up to 25 pounds; occasional lifting of heavier items with assistance. Frequent use of hands and fingers to handle small parts, operate measuring instruments, and input data into computer systems. Ability to perform repetitive motions of the wrists, hands, and arms during part handling and equipment use. Requires close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus for precision inspection tasks. Must be able to hear verbal instructions, alarms, and signals in a manufacturing environment. Occasional reaching, stooping, bending, turning, or crouching to retrieve or position parts and materials. Ability to work in both office and production environments, which may involve moderate noise levels, temperature variation, and use of personal protective equipment (PPE) when required. Salary ranges for this position are determined based upon the job location and can be adjusted based upon experience, reflecting our commitment to valuing the expertise and contributions of our individual team members. Salary range for this role is $22-27/hr based upon experience.

Parallel Employment group in partnership with a customer in Lancaster has an exciting opening for a Quality Control Technician. In this role, you will verify product conformance in a fast paced environment with a large range of products. Additionally you will be receiving First Piece, In-process, Last Piece, Final and First Article Inspections. Responsibilities: · Follow all company policies, procedures, and work instructions in the completion of daily activities with minimal input and supervision to ensure successful accomplishment of company objectives. · Perform Receiving Inspections to verify that incoming parts, materials, and related documentation meet requirements and are suitable for use. · Perform First piece, In-process, Last piece, and Final inspections per sampling plans, product requirements, and job instructions to verify product conformity. · Perform First Article Inspections to ensure manufacturing die, tooling, and other manufacturing methods result in product meets customers drawing requirements. · Perform customer specific required Inspections and complete Inspection reports per the stated requirements. · Document, identify, and segregate nonconforming product in accordance with policies, procedures, and work instructions. · Make requests to suppliers for missing or incorrect documentation. · Use appropriate measuring devices and automated inspection equipment to perform inspections including basic programming of automated inspection equipment. · Interact with other departments in a professional manner in addressing product quality and service issues. · Provide other departments with information and assistance to support them in accomplishing their objectives. · Contribute to and participate in improvement activities within the department and the company. · Follow departmental procedures and work instructions as written and recommend improvements as necessary. · Perform any other task/activity assigned by the supervisor within the scope of Company business. · Maintain a safe and clean working environment by complying with policies, guidelines, and regulatory requirements Requirements High school diploma or equivalent required. Associate degree is preferred. 1 year of experience in inspection required. C ommunication - Advanced professional written and oral communication skills, including presentation skills. Safety Awareness - Ability to identify and correct conditions that affect employee safety. Quality Management - Provides high quality services, processes, programs and products while consistently seeking ways to improve outcomes and enhance service. Customer Oriented - Ability to take care of the customers' needs while following company procedures. Honesty / Integrity - Ability to be truthful and be seen as credible in the workplace. Teamwork -Working as a productive member of a cohesive group toward a common goal and contributing to team development and effective team dynamics. Parallel Employment Group is an Equal Opportunity Employer #IND456

Professional Plastics is a leading distributor of high-performance engineering plastic shapes. We provide the widest range of engineering plastics, composites & technical ceramics in the marketplace. Established in 1984, Professional Plastics has grown to 22 locations across the USA, Singapore & Taiwan. We are a family-owned and operated business that values hard work, integrity and ethics. Professional Plastics is currently offering great career opportunities. We are interested in hiring motivated professionals who share our core values and desire to be part of a dynamic team. Professional Plastics is an equal opportunity employer and offers competitive pay and benefits. Position Summary: The Quality Technician ensures that product conforms to all customer expectations through documented inspection and testing procedures utilizing precision measuring/testing equipment and accurately interpreting specifications and blueprint GD&T requirements. This position requires the ability to develop procedures and write clear work instructions and inspection plans. This may also include preparation of PPAP documentation and other PPAP support activities such as dimensional layouts, gage verification, data analysis, material certification review, and maintaining traceability. In collaboration with engineering, manufacturing, and quality leadership, the Quality Technician participates in process improvement activities to optimize efficiencies and improve product quality. Essential Duties and Responsibilities: Include the following, as well as other duties that may be assigned. Establish an understanding of customer product requirements. Perform testing and inspection on incoming materials from vendors and outgoing product shipping to customers. Read and interpret blueprints and drawings with an understanding of GD&T. Interpret specifications and other technical industry and customer documentation. Maintain calibration records for measuring devices and equipment. Perform process capability studies, including obtaining and analyzing data using statistical methods. Take quick action when a nonconformance is detected. Utilize ERP system to perform effective containment activities. Perform root cause analysis and develop permanent corrective actions. Access customer portals for documentation and data submittals. Support Quality Control incoming, in-process, and final inspection needs. Ensure all internal and customer requirements are met prior to product release. Support certification and customer audits. Perform Internal Audits. Establish collaborative working relationships with customers, vendors, and all internal departments. Multitask - manage several projects at once. Present data and other information in an organized and appropriate manner Minimum Qualifications: To perform the job successfully, the individual must have the following minimum qualifications: Knowledge, Skills, and Abilities: Knowledge of Geometric Dimensioning & Tolerancing (GD&T) Ability to read and interpret drawing/blueprints/schematics Experience conducting and/or preparing for audits Understanding of the AS9100 or ISO9001 standard Developing and maintaining effective customer relationships Proficiency in standard office and database programs/equipment Education and Experience: Required and preferred educational and experiential qualifications Associate degree in Engineering/Manufacturing Technology or other relevant technical field 3 years QA or QC experience in a manufacturing environment Metrology experience Experience interacting with customers Benefits: DailyPay Earned Wage Access Medical Dental Vision Flexible Spending Account 401K Plan with Company Match Basic Life and AD&D Voluntary Life Insurance Long Term Disability Employee Assistance Program Paid Time Off (PTO) Paid Holidays Morgan Stanley Financial Advice Short Term Disability Accident, Critical Illness and Hospital Indemnity MetLife Legal Plan Norton LifeLock United Pet Care Discount Program LifeMart Employee Discounts Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to stand, walk, reach with hands or arms and talk or hear. The employee is frequently required to type, use telephonic devices, and view data on computer screens. The employee is occasionally required to use hands or fingers, handle or feel objects, tools, or controls. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is frequently exposed to office equipment and moving mechanical parts. The noise level in the work environment is usually moderate, however certain areas of the work environment may have elevated noise levels and require hearing protection. Job Type: Full-time Equal Opportunity Employer: Disability/Veteran

Job Description GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. The GTI team consists of more than 50 professionals spanning from fabrication and engineering to government and military specialists. Our combination of expertise allows us to provide top quality solutions and customer service for various industries and missions. The QC Technician is responsible for the inspection and testing of materials and finished products at various stages of the manufacturing process to ensure they comply with all applicable laws, industry codes & standards, as well as Company and Customer specifications/standards. Job Responsibilities: Develop and maintain inspection reports. Ensure compliance with federal and state laws, as well as company standards and specifications. Maintain calibration of quality control equipment. Perform inspections across all stages of production. Prepare and maintain test data for review. Evaluate data and draft reports, noting any relevant deviations from existing standards. Identify areas for quality control improvement and implement new methods accordingly. Communicate quality or compliance concerns with urgency. Other duties as assigned by the QA Manager. Required Qualifications: High school diploma or general education degree (GED) required. Solid understanding of measuring, inspection and test equipment. Minimum of 2-5 years of inspection and/or production experience in the metals fabrication industry. Visual weld and welding inspection experience. Proficiency with Microsoft Office programs, specifically Excel. Strong working knowledge of various mathematical concepts including fractions, ratios, and proportions. Ability to lift and/or move up to 50 pounds occasionally. Specific vision abilities required include close vision, color vision, and the ability to adjust focus. (minimum required visual acuity - 20/20 corrected or uncorrected) Demonstrated ability to work independently with minimal supervision. Excellent organizational skills. Demonstrated ability to analyze and interpret information. Ability to read and interpret mechanical, electrical, and fabrication drawings. Preferred Qualifications: Associate or bachelor's Degree in a related field. AWS Certified Welding Inspector - CWI. GrowTech Industries, LLC is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Requirements QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position requires a high degree of self-motivation and good organizational skills. Two to four months of training are required to properly prepare a person for this position. EDUCATION and/or EXPERIENCE: Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to walk, sit, and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: ***************************************.

Work Schedule Standard (Mon-Fri) Environmental Conditions Able to lift 40 lbs. without assistance, Adherence to all Good Manufacturing Practices (GMP) Safety Standards, Cold Room/Freezers -22degreesF/-6degrees C, Some degree of PPE (Personal Protective Equipment) required (safety glasses, gowning, gloves, lab coat, ear plugs etc.), Warehouse, Will work with hazardous/toxic materials Job Description As part of the Thermo Fisher Scientific team, you'll discover meaningful work that makes a positive impact on a global scale. Join our colleagues in bringing our Mission to life every single day to enable our customers to make the world healthier, cleaner and safer. We provide our global teams with the resources needed to achieve individual career goals while helping to take science a step beyond by developing solutions for some of the world's toughest challenges, like protecting the environment, making sure our food is safe or helping find cures for cancer. Location/Division Specific Information: First Shift: Monday - Friday 7am - 330pm (may require start and end time flexibility based on training and production needs) The Thermo Fisher Scientific BioProduction division, located at 3175 Staley Road Grand Island NY 14072, supports developers and manufacturers of biological-based therapeutics and vaccines with a portfolio of premium cell culture media and buffers as well as on site custom services dedicated to upstream cell culture, downstream purification, analytics for detection and quantitation of process/product impurities, and a catalog of single-use solutions spanning the biologics workflow. How Will You Make an Impact?: We need a motivated individual with excellent communication and laboratory skills to coordinate and complete planned and detailed activities within a quality system to ensure product, process, system, or equipment quality requirements are met. A Day in the Life: Perform wet chemical analyses based on both internal and Compendia (USP, EP, ACS, etc) based methodologies on raw materials (i.e. salts, sugars, amino acids, vitamins, etc) . Perform physical inspection and documentation review of incoming manufacturing components. Education: Required: High School Diploma required Preferred: AAS or Bachelors degree in Chemistry, Biology, or other Sciences Experience: Preferred: Experience in a cGMP environment/QC or QA related field Knowledge, Skills, Abilities: Required: Strong organizational skills and the ability to work independently. Required: Ability to work in a high paced team environment, prioritize work accordingly. Required: General digital literacy, specifically in Microsoft office programs. Preferred: 1-2 years of Chemistry lab experience (wet Chemistry lab work and safety protocols). Physical Requirements / Work Environment: Able to lift 40 lbs. without assistance Adherence to all Good Manufacturing Practices (GMP) Safety Standards Occasionally required to enter Cold Room/Freezers -22degreesF/-6degrees C Some degree of PPE (Personal Protective Equipment) required (safety glasses, gowning, gloves, lab coat, ear plugs etc.) Will work with hazardous/toxic materials What We Offer: Compensation Competitive Pay Performance Related Bonus where eligible Annual merit performance-based increase Excellent Benefits Medical benefits Paid Time Off/Annual Leave Employee Referral Bonus Career Advancement Opportunities Compensation and Benefits The hourly pay range estimated for this position based in New York is $16.95-$25.42. This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes: A choice of national medical and dental plans, and a national vision plan, including health incentive programs Employee assistance and family support programs, including commuter benefits and tuition reimbursement At least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policy Retirement and savings programs, such as our competitive 401(k) U.S. retirement savings plan Employees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discount For more information on our benefits, please visit: *****************************************************

About Us iNRCORE, LLC is a world-class manufacturer of custom and catalog magnetic solutions. With employees worldwide, iNRCORE is a growing international partner with Gowanda Components Group and Bicron Manufacturing, to design, manufacture and sell specialty electronic components. For over 70 years iNRCORE has deployed reliable and intelligent solutions to power the world's next generation of systems. iNRCORE is committed to supplying the highest level of compliance and innovation to customers' most demanding applications from the frontlines of defense to the frontiers of space exploration. iNRCORE's power and signal magnetic components are utilized to help save lives, generate powerful connections and further the knowledge of the cosmos. When failure is not an option, the world trusts iNRCORE. iNRCORE models itself after its products - Rugged to the Core. About the Position The Quality Inspector is responsible for inspecting, auditing, and reporting on materials, processes, and products using variable and attribute measuring instruments and techniques to ensure conformance with the company's quality standards. Essential Duties and Responsibilities Inspect and approve incoming materials by confirming specifications, conducting visual and mechanical measurement tests, and rejecting and returning nonconforming materials. Inspects in-process and/or finished products by confirming specifications and drawings, conducting visual and mechanical measurement testing, returning nonconforming product for rework, and verifying and validating the completed rework. Documents inspection results by completing the required reports and logs on a timely basis while summarizing rework and scrap while inputting the data into the respective database. Inspect high reliability parts based on the J-STD-001 and Space Addendum and accept/reject based on IPC-A-610 requirements under a high-power microscope. Accomplishes quality and organization mission by completing related results as needed. Reading and interpreting electronic drawings and customer supplied blueprints and drawings and have a basic knowledge of statistical techniques. Knowing the definitions of critical, major, and minor characteristics. Schedule: Monday through Friday 5 am to 1:30 pm Qualifications Education/Experience: A two-year technical certificate or equivalent experience required. Knowledge/Skills/Abilities: Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. To perform this job successfully, an individual should have knowledge and expertise in using Microsoft Office software (Outlook, Excel, Word, and PowerPoint) Must have the ability to read and interpret electronic drawings and customer supplied blueprints and drawings and have a basic knowledge of statistical techniques. Must have experience using electronic and mechanical testing equipment. Prefers someone have a good working knowledge of using and referencing military and industry standards, Prefers someone who has a general knowledge of ASME Y14.5M, working knowledge of GD&T, and must understand the x, y, and z coordinate system. Must know basic statistical terms and techniques, how to enter and plot data as well as recognize out-of-control conditions. Must understand types of measurement, measurement terminology and the diverse types of measurement scales. Must know the difference between accuracy and precision and be able to select the appropriate measuring tools and techniques. Must understand lot level traceability based on product, processes, and raw material. Must have a strong knowledge of basic mathematical operations and perform measurement conversions; be able to solve for x; add and subtract degrees, minutes, and seconds. Why should you join our team? Our team is growing! We collaborate and use innovation to build meaningful relationships, both internally with colleagues and externally with customers. Our business casual dress code allows you personality to shine through. Our new facility is clean, spacious, and located near I-95, with a variety of local restaurants easily accessible. Although you can occasionally enjoy a variety of snacks on-site too! We are committed to providing our employees with a comprehensive package that stands as one of the most competitive within the manufacturing and engineering industries. All benefits start immediately, which means no waiting periods for you or your family! Medical, Dental, Vision, & Prescription plans Flexible Spending Accounts (FSA) Health Savings Accounts (HSA) 401K Program with Employer Match Group Life Insurance Long Term Disability Coverage Vacation, Sick, and Floating Holidays (in addition to 7 paid holidays) This position is not eligible for relocation allowance. iNRCORE, LLC is an equal-opportunity organization. We recruit, employ, train, compensate and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law. At iNRCORE, we are committed to fostering an inclusive, accessible environment, where all employees are valued and supported. If you are a candidate with a disability and need an accommodation to complete the application process, please contact Caity Dawson at *************************. Include your full name and the best way to reach you, along with the accommodation needed to assist you with the application process. Veterans encouraged to apply.

Job Description About Us iNRCORE, LLC is a world-class manufacturer of custom and catalog magnetic solutions. With employees worldwide, iNRCORE is a growing international partner with Gowanda Components Group and Bicron Manufacturing, to design, manufacture and sell specialty electronic components. For over 70 years iNRCORE has deployed reliable and intelligent solutions to power the world's next generation of systems. iNRCORE is committed to supplying the highest level of compliance and innovation to customers' most demanding applications from the frontlines of defense to the frontiers of space exploration. iNRCORE's power and signal magnetic components are utilized to help save lives, generate powerful connections and further the knowledge of the cosmos. When failure is not an option, the world trusts iNRCORE. iNRCORE models itself after its products - Rugged to the Core. About the Position The Quality Inspector is responsible for inspecting, auditing, and reporting on materials, processes, and products using variable and attribute measuring instruments and techniques to ensure conformance with the company's quality standards. Essential Duties and Responsibilities Inspect and approve incoming materials by confirming specifications, conducting visual and mechanical measurement tests, and rejecting and returning nonconforming materials. Inspects in-process and/or finished products by confirming specifications and drawings, conducting visual and mechanical measurement testing, returning nonconforming product for rework, and verifying and validating the completed rework. Documents inspection results by completing the required reports and logs on a timely basis while summarizing rework and scrap while inputting the data into the respective database. Inspect high reliability parts based on the J-STD-001 and Space Addendum and accept/reject based on IPC-A-610 requirements under a high-power microscope. Accomplishes quality and organization mission by completing related results as needed. Reading and interpreting electronic drawings and customer supplied blueprints and drawings and have a basic knowledge of statistical techniques. Knowing the definitions of critical, major, and minor characteristics. Schedule: Monday through Friday 5 am to 1:30 pm Qualifications Education/Experience: A two-year technical certificate or equivalent experience required. Knowledge/Skills/Abilities : Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. To perform this job successfully, an individual should have knowledge and expertise in using Microsoft Office software (Outlook, Excel, Word, and PowerPoint) Must have the ability to read and interpret electronic drawings and customer supplied blueprints and drawings and have a basic knowledge of statistical techniques. Must have experience using electronic and mechanical testing equipment. Prefers someone have a good working knowledge of using and referencing military and industry standards, Prefers someone who has a general knowledge of ASME Y14.5M, working knowledge of GD&T, and must understand the x, y, and z coordinate system. Must know basic statistical terms and techniques, how to enter and plot data as well as recognize out-of-control conditions. Must understand types of measurement, measurement terminology and the diverse types of measurement scales. Must know the difference between accuracy and precision and be able to select the appropriate measuring tools and techniques. Must understand lot level traceability based on product, processes, and raw material. Must have a strong knowledge of basic mathematical operations and perform measurement conversions; be able to solve for x; add and subtract degrees, minutes, and seconds. Why should you join our team? Our team is growing! We collaborate and use innovation to build meaningful relationships, both internally with colleagues and externally with customers. Our business casual dress code allows you personality to shine through. Our new facility is clean, spacious, and located near I-95, with a variety of local restaurants easily accessible. Although you can occasionally enjoy a variety of snacks on-site too! We are committed to providing our employees with a comprehensive package that stands as one of the most competitive within the manufacturing and engineering industries. All benefits start immediately, which means no waiting periods for you or your family! Medical, Dental, Vision, & Prescription plans Flexible Spending Accounts (FSA) Health Savings Accounts (HSA) 401K Program with Employer Match Group Life Insurance Long Term Disability Coverage Vacation, Sick, and Floating Holidays (in addition to 7 paid holidays) This position is not eligible for relocation allowance. iNRCORE, LLC is an equal-opportunity organization. We recruit, employ, train, compensate and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law. At iNRCORE, we are committed to fostering an inclusive, accessible environment, where all employees are valued and supported. If you are a candidate with a disability and need an accommodation to complete the application process, please contact Caity Dawson at *************************. Include your full name and the best way to reach you, along with the accommodation needed to assist you with the application process. Veterans encouraged to apply.

About Us iNRCORE, LLC is a world-class manufacturer of custom and catalog magnetic solutions. With employees worldwide, iNRCORE is a growing international partner with Gowanda Components Group and Bicron Manufacturing, to design, manufacture and sell specialty electronic components. For over 70 years iNRCORE has deployed reliable and intelligent solutions to power the world's next generation of systems. iNRCORE is committed to supplying the highest level of compliance and innovation to customers' most demanding applications from the frontlines of defense to the frontiers of space exploration. iNRCORE's power and signal magnetic components are utilized to help save lives, generate powerful connections and further the knowledge of the cosmos. When failure is not an option, the world trusts iNRCORE. iNRCORE models itself after its products - Rugged to the Core. About the Position The Quality Inspector is responsible for inspecting, auditing, and reporting on materials, processes, and products using variable and attribute measuring instruments and techniques to ensure conformance with the company's quality standards. Essential Duties and Responsibilities Inspect and approve incoming materials by confirming specifications, conducting visual and mechanical measurement tests, and rejecting and returning nonconforming materials. Inspects in-process and/or finished products by confirming specifications and drawings, conducting visual and mechanical measurement testing, returning nonconforming product for rework, and verifying and validating the completed rework. Documents inspection results by completing the required reports and logs on a timely basis while summarizing rework and scrap while inputting the data into the respective database. Inspect high reliability parts based on the J-STD-001 and Space Addendum and accept/reject based on IPC-A-610 requirements under a high-power microscope. Accomplishes quality and organization mission by completing related results as needed. Reading and interpreting electronic drawings and customer supplied blueprints and drawings and have a basic knowledge of statistical techniques. Knowing the definitions of critical, major, and minor characteristics. Schedule: Monday through Friday 5 am to 1:30 pm Qualifications Education/Experience: A two-year technical certificate or equivalent experience required. Knowledge/Skills/Abilities: Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. To perform this job successfully, an individual should have knowledge and expertise in using Microsoft Office software (Outlook, Excel, Word, and PowerPoint) Must have the ability to read and interpret electronic drawings and customer supplied blueprints and drawings and have a basic knowledge of statistical techniques. Must have experience using electronic and mechanical testing equipment. Prefers someone have a good working knowledge of using and referencing military and industry standards, Prefers someone who has a general knowledge of ASME Y14.5M, working knowledge of GD&T, and must understand the x, y, and z coordinate system. Must know basic statistical terms and techniques, how to enter and plot data as well as recognize out-of-control conditions. Must understand types of measurement, measurement terminology and the diverse types of measurement scales. Must know the difference between accuracy and precision and be able to select the appropriate measuring tools and techniques. Must understand lot level traceability based on product, processes, and raw material. Must have a strong knowledge of basic mathematical operations and perform measurement conversions; be able to solve for x; add and subtract degrees, minutes, and seconds. Why should you join our team? Our team is growing! We collaborate and use innovation to build meaningful relationships, both internally with colleagues and externally with customers. Our business casual dress code allows you personality to shine through. Our new facility is clean, spacious, and located near I-95, with a variety of local restaurants easily accessible. Although you can occasionally enjoy a variety of snacks on-site too! We are committed to providing our employees with a comprehensive package that stands as one of the most competitive within the manufacturing and engineering industries. All benefits start immediately, which means no waiting periods for you or your family! Medical, Dental, Vision, & Prescription plans Flexible Spending Accounts (FSA) Health Savings Accounts (HSA) 401K Program with Employer Match Group Life Insurance Long Term Disability Coverage Vacation, Sick, and Floating Holidays (in addition to 7 paid holidays) This position is not eligible for relocation allowance. iNRCORE, LLC is an equal-opportunity organization. We recruit, employ, train, compensate and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law. At iNRCORE, we are committed to fostering an inclusive, accessible environment, where all employees are valued and supported. If you are a candidate with a disability and need an accommodation to complete the application process, please contact Caity Dawson at *************************. Include your full name and the best way to reach you, along with the accommodation needed to assist you with the application process. Veterans encouraged to apply.

Job Title: Manufacturing Process Technician Reports To: Director of Operations FLSA Status & EEO Code: Exempt & Professional Division/Department: GHM / Operations Level of Work: Level II Graham Manufacturing is seeking a skilled and detail-oriented Manufacturing Process Technician to support and optimize our production operations. This role focuses on developing, documenting, and improving process operation sequences across welding, machining, and assembly areas to ensure efficient, high-quality manufacturing. The ideal candidate will have hands-on experience with industrial fabrication techniques and a strong understanding of manufacturing workflows. Key Results Areas by level of work: Level II: Service - Coordinating "production" with problem solving and prevention Resource management (material and people) * Effectively and concisely coordinate with engineering and manufacturing Process Sequencing * Develop and maintain detailed process operation sequences for manufacturing tasks. * Collaborate with engineering and production teams to ensure logical, efficient workflows. * Identify and recommend improvements to streamline operations. Technical Support * Assist in troubleshooting process-related issues on the shop floor. * Support the introduction of new products and processes into production. Cross-Functional Collaboration * Work closely with design engineers, weld engineers, quality assurance, supply chain and production supervisors. * Participate in root cause analysis and corrective action plans as required. Resource scheduling, output management and reporting * Create optimal process sequences based on design and manufacturing capabilities. * Create routings for commercial major jobs and then expanding into other jobs as workload permits. * Complete routings in ERP system Documentation & Standards * Create and update, process maps, routings and dependency diagrams. * Ensure compliance with quality standards throughout all operations. Continuous Improvement * Evaluate efficiency and effectiveness of engineering and manufacturing as it pertains to design for manufacturability and process sequencing, and provide suggestions for improvement. * Objectively evaluate improvement suggestions from team members, use the feedback to improve processes when prudent Equipment & process maintenance * Document processes within the function to ensure consistency in execution Professional Development (self and reports) * Demonstrate initiative, and respect for team members * Follows up with supervisor on professional development goals and opportunities Qualifications: Education and Training * High School Diploma * Associate's Degree in Engineering or related Science field preferred Experience: * 3+ years of manufacturing technician or manufacturing related process planning experience in an engineer to order environment * 5+ years of fabrication experience (welding preferred) in lieu of manufacturing process technician planning experience in an engineer to order environment Skills: To perform the job successfully, an individual should demonstrate the following competencies: * Experience reading technical drawings desired with a drive to be detail oriented and willingness to learn specification requirements * Ability to read and interpret engineering product structures (bills of material) to incorporate all operations necessary to convert raw materials to finished products * Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture * Strong organization and time management skills * Able to manage multiple priorities and deadlines * Ability to operate cross functionally within the organization and drive product/process improvements throughout the process * Strong written and verbal communication skills required * Ability to create routings and other operations sequence related activities in an ERP system * Must have proficiency in MS office applications including spreadsheet, word, and vision * Ability and willingness to abide by set company policy * Demonstrate behavior consistent with company values Physical and Mental Demands The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Physical demands: Work conditions are typical for an office environment. The incumbent is required to be present on the shop floor at times to properly complete job tasks. Required to speak and communicate clearly with others. * Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure. * Work Environment: This job primarily operates in an office setting but also requires visiting shop floor to review and discuss manufacturing operations. This role routinely uses standard office equipment such as computers, phones, photocopiers and filing cabinets. While performing the duties of this position, the incumbent is exposed to manufacturing and equipment noise and is expected to follow all PPE requirements while working in the fabrication areas. Work Authorization/Security Clearance Must be able to work in the U.S without sponsorship. Ability to obtain US government security clearance is desired. This job description is not all inclusive but rather serves as a general guideline of the current needs of the position and can be modified at the discretion of management to meet current business needs. Experience and education requirements are the primary basis for awarding this position, however substitutions that are essentially equivalent may be made as they relate to the essential functions, duties, and responsibilities of this position Salary Description $60,000 - $80,000

Buffalo News Names Sealing Devices Inc. A Winner of The Metro Buffalo Top Workplaces 2024 Award Statement of Work: * Follow all company policies, procedures, and work instructions in the completion of daily activities with minimal input and supervision to ensure successful accomplishment of company objectives. * Perform Receiving Inspections to verify that incoming parts, materials, and related documentation meet requirements and are suitable for use. * Perform First piece, In-process, Last piece, and Final inspections per sampling plans, product requirements, and job instructions to verify product conformity. * Perform First Article Inspections to ensure manufacturing die, tooling, and other manufacturing methods result in product meets customers drawing requirements. * Perform customer specific required Inspections and complete Inspection reports per the stated requirements. * Document, identify, and segregate nonconforming product in accordance with policies, procedures, and work instructions. * Complete and submit customer documentation as required. * Document, identify and segregate nonconforming product in accordance with policies, procedures and work instructions. * Make requests to suppliers for missing or incorrect documentation. * Use appropriate measuring devices and automated inspection equipment to perform inspections including basic programming of automated inspection equipment. * Interact with other departments in a professional manner in addressing product quality and service issues. * Provide other departments with information and assistance to support them in accomplishing their objectives. * Contribute to and participate in improvement activities within the department and the company. * Follow departmental procedures and work instructions as written and recommend improvements as necessary. * Perform any other task/activity assigned by the supervisor within the scope of Company business. * Maintain a safe and clean working environment by complying with policies, guidelines, and regulatory requirements per the Sealing Devices Quality System What you will need to Succeed: * High School Graduate or General Education Degree (GED): Required * Associate's Degree (two year college or technical school) or Work Equivalent, Field of Study: Industrial Technology or Quality related field * Bachelor's Degree (four year college or technical school) Preferred, Field of Study: Industrial Technology or Quality related field * Computer Literacy (MS Office), 2 plus years of experience in mechanical inspection and blueprint reading required. * Knowledge of GD&T, basic statistical techniques, automated inspection experience preferred. * ASQ Certified Quality Technician (CQT) preferred Benefits offered for this role: * Medical/Dental/Vision Coverage * Health Reimbursement Account (HRA) provided by Company * 401K * Paid Vacation & Holidays * Free Life Insurance for Employee * Flex Spending - Medical, Dental, Vision and Child Care * Employee Referral Program * Company Sponsored Training * Profit Sharing - Earn up to 18% of your gross wages after one-year anniversary * Free Employee Assistance Program * Wellness Programs - Onsite Reflexology, Chair Massage, Nutritional Sessions, Chiropractic * Legal Shield and Aflac * Employee Recognition Program * Company Celebrations - Including: Lunches, Breakfasts, Ice Cream Truck, Holiday Parties * Career Advancement Opportunities Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * Ability to sit or stand for extended periods of time while performing detailed inspections and working at inspection stations. * Regularly required to lift, carry, and move materials or product up to 25 pounds; occasional lifting of heavier items with assistance. * Frequent use of hands and fingers to handle small parts, operate measuring instruments, and input data into computer systems. * Ability to perform repetitive motions of the wrists, hands, and arms during part handling and equipment use. * Requires close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus for precision inspection tasks. * Must be able to hear verbal instructions, alarms, and signals in a manufacturing environment. * Occasional reaching, stooping, bending, turning, or crouching to retrieve or position parts and materials. * Ability to work in both office and production environments, which may involve moderate noise levels, temperature variation, and use of personal protective equipment (PPE) when required. Salary ranges for this position are determined based upon the job location and can be adjusted based upon experience, reflecting our commitment to valuing the expertise and contributions of our individual team members. Salary range for this role is $22-27/hr based upon experience.

Professional Plastics is a leading distributor of high-performance engineering plastic shapes. We provide the widest range of engineering plastics, composites & technical ceramics in the marketplace. Established in 1984, Professional Plastics has grown to 22 locations across the USA, Singapore & Taiwan. We are a family-owned and operated business that values hard work, integrity and ethics. Professional Plastics is currently offering great career opportunities. We are interested in hiring motivated professionals who share our core values and desire to be part of a dynamic team. Professional Plastics is an equal opportunity employer and offers competitive pay and benefits. Position Summary: The Quality Technician ensures that product conforms to all customer expectations through documented inspection and testing procedures utilizing precision measuring/testing equipment and accurately interpreting specifications and blueprint GD&T requirements. This position requires the ability to develop procedures and write clear work instructions and inspection plans. This may also include preparation of PPAP documentation and other PPAP support activities such as dimensional layouts, gage verification, data analysis, material certification review, and maintaining traceability. In collaboration with engineering, manufacturing, and quality leadership, the Quality Technician participates in process improvement activities to optimize efficiencies and improve product quality. Essential Duties and Responsibilities: Include the following, as well as other duties that may be assigned. Establish an understanding of customer product requirements. Perform testing and inspection on incoming materials from vendors and outgoing product shipping to customers. Read and interpret blueprints and drawings with an understanding of GD&T. Interpret specifications and other technical industry and customer documentation. Maintain calibration records for measuring devices and equipment. Perform process capability studies, including obtaining and analyzing data using statistical methods. Take quick action when a nonconformance is detected. Utilize ERP system to perform effective containment activities. Perform root cause analysis and develop permanent corrective actions. Access customer portals for documentation and data submittals. Support Quality Control incoming, in-process, and final inspection needs. Ensure all internal and customer requirements are met prior to product release. Support certification and customer audits. Perform Internal Audits. Establish collaborative working relationships with customers, vendors, and all internal departments. Multitask - manage several projects at once. Present data and other information in an organized and appropriate manner Minimum Qualifications: To perform the job successfully, the individual must have the following minimum qualifications: Knowledge, Skills, and Abilities: Knowledge of Geometric Dimensioning & Tolerancing (GD&T) Ability to read and interpret drawing/blueprints/schematics Experience conducting and/or preparing for audits Understanding of the AS9100 or ISO9001 standard Developing and maintaining effective customer relationships Proficiency in standard office and database programs/equipment Education and Experience: Required and preferred educational and experiential qualifications Associate degree in Engineering/Manufacturing Technology or other relevant technical field 3 years QA or QC experience in a manufacturing environment Metrology experience Experience interacting with customers Benefits: DailyPay Earned Wage Access Medical Dental Vision Flexible Spending Account 401K Plan with Company Match Basic Life and AD&D Voluntary Life Insurance Long Term Disability Employee Assistance Program Paid Time Off (PTO) Paid Holidays Morgan Stanley Financial Advice Short Term Disability Accident, Critical Illness and Hospital Indemnity MetLife Legal Plan Norton LifeLock United Pet Care Discount Program LifeMart Employee Discounts Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to stand, walk, reach with hands or arms and talk or hear. The employee is frequently required to type, use telephonic devices, and view data on computer screens. The employee is occasionally required to use hands or fingers, handle or feel objects, tools, or controls. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is frequently exposed to office equipment and moving mechanical parts. The noise level in the work environment is usually moderate, however certain areas of the work environment may have elevated noise levels and require hearing protection. Job Type: Full-time Equal Opportunity Employer: Disability/Veteran

Job DescriptionQuality Control Technician (2nd Shift - 3:30 - Midnight) Also known as: Quality Inspector, QC Inspector, QA Technician, Quality Assurance Technician, Manufacturing Quality Technician, Welding Inspector, Metal Fabrication Inspector, Structural Steel Inspector, Production Quality Technician Location: Buffalo, NY | Schedule: Monday-Friday, 3:30 PM-12:00 AM | Pay range: 20-25 an hour with Shift differential GTI Fabrication manufactures custom modular structures, energy storage enclosures, and container-based systems for military, defense, energy, and commercial industries. We specialize in metal fabrication, welding, assembly, structural steel, and modular construction at our Buffalo, NY facility. We are hiring a 2nd Shift Quality Control Technician (Quality Inspector / QC Inspector) to perform inspections on welded, fabricated, and assembled components throughout the manufacturing process. Responsibilities Perform incoming, in-process, and final inspections on fabricated metal parts, welds, and assemblies Conduct visual weld inspections and dimensional inspections Read and interpret blueprints, weld symbols, fabrication drawings, and mechanical prints Maintain accurate QC reports, inspection logs, and test data Calibrate and maintain measurement tools and QC equipment Identify nonconformities (NCRs) and communicate issues to supervisors Support continuous improvement for quality assurance and welding quality Work closely with fabrication, welding, assembly, and engineering teams Qualifications 2-5 years of experience as a Quality Control Technician, Quality Inspector, QC Inspector, Welding Inspector, or Manufacturing Quality Technician Experience with weld inspection and metal fabrication inspection Proficiency using calipers, gauges, tape measures, squares, and weld inspection tools Ability to read and interpret mechanical drawings, fabrication prints, and electrical diagrams Strong math skills (fractions, decimals, tolerances) Ability to lift 50 lbs and work in a shop-floor production environment High school diploma or GED Preferred: AWS CWI certification or working toward certification Experience in welding, structural steel, modular manufacturing, or industrial fabrication GrowTech Industries, LLC is an equal opportunity employer. 2nd Shift - Monday-Friday 3:30 - Midnight

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Chili, NY HOURS: DAYS 7am - 7pm on a 2-2-3 schedule SUMMARY: Tests and inspects products at various stages of production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. This position can present the motivated employee with several career options as the company grows and he/she gains expertise and knowledge. ESSENTIAL DUTIES AND RESPONSIBILITIES: Performs visual inspections and physical tests utilizing equipment in Lab. Products are tested for a variety of qualities such as dimensions, performance or chemical characteristics. Records and evaluates test data and writes reports. Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Enters data into computer for analysis. Prepares certificates of analysis on finished product for our customers. Able to use and read measuring instruments as well as operating instructions and procedure manuals. Trial reports, inspection and tracking. Assist QA and Technical departments in their duties. Must take responsibility for work assigned. Effective communication skills, both verbal and written. Support and follow all plant Safety Rules, GMPs, and other procedural training requirements. Requirements QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position requires a high degree of self-motivation and good organizational skills. Two to four months of training are required to properly prepare a person for this position. EDUCATION and/or EXPERIENCE: Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to walk, sit, and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: ***************************************.

Parallel Employment Group in partnership with an aerospace manufacturer in East Aurora is looking for Quality control inspectors to join the team. In this role the Quality Inspector ensures all assigned inspections are properly completed and documented in compliance with established policies and procedures and corresponding inspection forms and reports are properly executed prior to releasing products for use. Shifts available: 1st and 2nd shift Pay Rate $18.50 to $24.50 Responsibilities Use and interpret work instructions and associated documents to ensure conformity of product. Performs final inspection of the product. Ensure all assigned inspections are properly completed in compliance with established policies and procedures and corresponding inspection records, reports, and forms are properly executed prior to releasing products. When necessary, create nonconforming material reports. Performing analysis, inspection, troubleshooting, and testing of products or components identified as non-conforming during an in-process and final inspection. Maintain inspection equipment, ensuring that it is used within the calibration cycle, and is in good working condition. Identify areas for improvement and participate in continuous improvement projects. Prepare accepted product for use by appropriately labeling product to indicate status and printing unique device identification labels as necessary. Performs other related duties and responsibilities as assigned. Requirements High School Diploma or equivalent At least 2 years' experience in Quality Inspection role Proficient in all aspects of inspection including using and maintaining all inspection equipment Experience with reading inspection processes and interpreting engineering drawings required Expertise in the application and use of gauges and inspection equipment Strong communication, organizational, documentation and time management skills Analytical, logical thought process and meticulous attention to detail Ability to work independently and as a member of the Quality team and other cross-functional teams as required Strong skills in Microsoft Office Suite with the ability to learn various manufacturing software systems Experience with ISO9000 or AS9100 Quality Systems a plus Parallel Employment Group is an equal opportunity employer #ind456

Medical, dental, and vision benefits-effective on date of hire Generous paid time off benefits and 10 paid Holidays 3 weeks plus 2 days of PTO Paid lunch time Company-paid life insurance 401k plan with company match WELL-BEING Low-cost nutrition and mental health visits Up to $150-off your gym membership annually Discounted Pet Insurances for your furry friends Access to individualized financial planning meetings Employee Discount Program with savings on electronics, home goods, gym equipment, and more Discounted family caregiving support CAREER GROWTH Tuition Reimbursement On-site Training Programs Defined Career Path for advancement in role and compensation New Hire On-boarding Training Plans Our top-notch work environment includes: Climate Controlled in the summer months Clean & Comfortable Setting Schedule hours: 1st shift Mon.-Fri. 7am-3pm We offer market competitive compensation. Potential salary range for this role is $19.00-26.00 Actual pay will be determined based on experience, qualifications, geographic location, and other job-related factors permitted by law. Position scope/summary Perform first piece, in process and final inspection or test on a wide variety of parts and document results. Indicate inspection status; maintain product traceability and non-conforming material control. Participate in internal audits, statistical process control and assist control of process documentation, records and equipment calibration. Essential duties and responsibilities Perform required inspections, measurements and testing of incoming parts, production first piece, in-process and finished product per established criteria Record results on appropriate documentation. Communicate any discrepancies to the person(s) responsible for corrective/preventive action activity Perform various dimensional inspections using specific dies, gages, microscopes, micrometers and other dimensional inspection system Indicate inspection status of parts with assigned labels and stamps Maintain product identification and traceability Control non-conforming product in accordance with documented procedures and verify timely corrective and preventative action Protect product during handling and storage in the performance of work Monitor factory environmental conditions, record data and identify adverse conditions Assist with distribution and control of process documentation and quality records Assist with control of measuring and test equipment calibration Participate in internal quality audits to verify compliance with documented procedures and specifications, record results and verify audit corrective action Assist with statistical methods of verifying and controlling process capability Provide leadership to production personnel on quality issues Comply with and reinforce the requirements of the Quality Manual and Standard Operating Procedures, ISO 13485, FDA Quality System Regulations and other customer standards Follow Occupational Safety and Health regulations, including laser safety practices. Performs job duties with little or no supervision or assistance Environmental working conditions Employee must comply with all safety policies and safe work procedures established by the company. Job tasks may also involve: Using personal protective equipment such as safety glasses, goggles, gloves, and other equipment as established in company policies and safe work procedures Working near cutting & machining fluids, solvents, lubricants and other hazardous chemicals using appropriate safety controls\ Lifting up to 50 pounds Frequent carrying, bending, standing, sitting, and repetitive motion Qualifications Minimum 2 years' experience as an inspector or 4 years manufacturing experience as a machine operator in a manufacturing or production environment. Prior medical device, aerospace, automotive or regulated Manufacturing environment preferred Certificate(s) of training related to this field of work (medical device industry or quality assurance) preferred Prior experience interpreting technical drawings & specifications required Proficient in the use of measuring and test equipment Demonstrate ability to check dimensions, surface relationships, finish material defects and mechanical strength of product following appropriate training Prior experience in the use of PC's and Microsoft Office software applications required It is impossible to list every requirement for, or responsibility of, any position. Similarly, we cannot identify all the skills a position may require since job responsibilities and the Company's needs may change over time. Therefore, the above job description is not comprehensive or exhaustive. The Company reserves the right to adjust, add to, or eliminate any aspect of the above description. The Company also retains the right to require all employees to undertake additional or different job responsibilities when necessary to meet business needs.