Quality technician jobs in Clifton, NJ

About Wakefern Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite , Price Rite , The Fresh Grocer , Dearborn Markets , Fairway Markets, Gourmet Garage , Di Bruno Bros , and Morton Williams banners. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern's co-operative members benefit from the company's extensive portfolio of services, including innovative technology, private label development, and best in class procurement practices. Your contribution The Product Inspector position is responsible for performing routine and thorough inspections of all inbound perishable foods to ensure the quality, wholesomeness, proper labeling, and fair packaging in adherence to the Wakefern standards. The Product Inspector will be expected to exhibit first-hand knowledge of Wakefern's Food Safety and Quality Practices along with USDA and FDA Guidelines. Additional job functions noted below. The hours worked will be 12:00am-8:00am. What you will do Inspects all inbound deliveries to ensure the purchased goods conform to all established product specifications, standards, and grade requirements. This applies the Drive for Results competency. Performs random organoleptic inspections of inbound goods to assure the quality, grade, and wholesomeness of the product. Inspects all inbound deliveries for cleanliness and soundness of the transportation vehicle and the absence of cross contamination. Monitors product temperatures by means of physical probing of goods and observation of time and temperature recording devices. Verifies the weights and counts of received goods. Examines all packaging for proper labeling and enforces all packaging and labeling requirements of the FDA, USDA, and USDC. Monitors products in inventory and storage for quality and safety. Performs daily sanitation inspections of all applicable facilities and warehouses. Gathers and organizes all records and documentation to comply with all regulatory requirements. Monitors all control points, critical control points, and quality control points for each of the food safety and food quality plans for the applicable perishable food facilities. Monitors store returns to determine if credit is warranted and direct operations as to the disposition of the returned goods. Core Competencies Communicate Effectively: Communicates thoughts and ideas in a well-organized manner, encouraging two way communication. Build Relationships: Creates cross functional partnerships through the development and maintenance of constructive and cooperative relationships. Stay Competitive: Demonstrates a mindset of continuous improvement while exhibiting passion and enthusiasm for their work. Embrace Change: Looks for new ways of working by supporting advancements in processes and technology. Develop You: Identifies and capitalizes on opportunities for personal and professional career growth. Drive for Results: Supports divisional and strategic objectives through achievement of work goals. What we're looking for Four year College degree preferred, or presently enrolled with a minimum of 60 credits, or a minimum of 3 years equivalent work related experience. Knowledge of USDA, AMS Grade Standards and inspection procedures, impacting the Drive for Results competency. Knowledge and understanding of FDA Preventive Controls for Human Food requirements, applying the Stay Competitive competency. Understanding and ability to monitor Sanitation Standard Operating Procedures. Must be able to maintain accurate records and reports. Ability to interact well with Supervision as well as Affiliated Warehouse Associates, applying the Build Relationships competency. Ability to communicate effectively with all levels of management and vendor representatives. Well-developed written and oral communication skills. Skilled in WMS, Rapid, Outlook, Microsoft Word, and Excel. Flexibility with regards to work schedule including days of the week, shifts, holidays, and locations. (Hours/Shifts 12:00am-8:00am). How you'll work Ability to perform heavy lifting (up to 70 lbs.). Ability to walk the length of the warehouse multiple times throughout the day (back and forth from the docks). Physical demands include the ability to bend, stretch, extend, tug and pull based on inspection of various products Ability to work in cold temperatures as low as 33 degrees. Company Perks Vibrant Food Centric Culture Comprehensive medical, dental and vision package Competitive Salary and Paid Time Off Fitness Reimbursement and Well-Being Program Corporate Training and Development University Collaborative team environment Paid Parental Leave 401K Matching Gifts and Community Volunteer Involvement Compensation and Benefits The salary for this position is $61,984.00. Placement in the salary depends on several factors, including experience, skills, education, geography, and budget considerations. Wakefern is proud to offer a comprehensive benefits package designed to support the health, well-being, and professional development of our Associates. Benefits include medical, dental, and vision coverage, life and disability insurance, a 401(k) retirement plan with company match & annual company contribution, paid time off, holidays, and parental leave. Associates also enjoy access to wellness and family support programs, fitness reimbursement, educational and training opportunities through our corporate university, and a collaborative, team-oriented work environment. Many of these benefits are fully or partially funded by the company, with some subject to eligibility requirements. More information can be found on our Count Me In website.

Job Title: Project Quality Engineer Shift: 1st Shift (Monday - Friday) Pay Rate: Up to $75000-$95,000 annually (commensurate with experience) Type: Direct Hire Reports To: QA Manager Dept.: Quality Assurance Job Description The Project Quality Engineer supports the Quality Assurance Manager in overseeing the Quality Assurance program for assigned rail car manufacturing projects. This role ensures compliance with contract requirements, technical specifications, and industry standards across production, acceptance, warranty, and modification phases. Responsibilities include creating Master Test and Inspection Plans, First Article Inspection schedules, Project Quality Plans, and audit procedures. The Project Quality Engineer coordinates closely with customers, vendors, and internal Kawasaki divisions to align project requirements, resolve quality issues, and support continuous improvement initiatives. This position also monitors documentation, leads corrective action activities, conducts contract reviews, and provides weekly and monthly quality reports. The engineer will serve as a primary Quality liaison between internal teams, subcontractors, and customer Resident Inspectors, ensuring timely communication, follow-up, and delivery of all quality-related commitments. Candidate Fit Summary This candidate is an excellent fit for organizations in the rail, aerospace, transportation, and heavy manufacturing sectors where strict compliance, technical quality standards, and contractual requirements are essential. They bring strong experience supporting complex production programs, managing supplier and customer interfaces, and developing detailed quality documentation. Skilled in FAI, FMEA, audits, and ISO 9001 processes, they excel in environments requiring strict quality controls, cross-functional coordination, and schedule accountability. Their ability to lead inspections, manage customer quality requirements, and drive corrective actions makes them a strong match for production-focused, project-driven engineering organizations. Essential Functions Implement and maintain QA programs for assigned contracts. Develop Master Test and Inspection Plans, Project Quality Plans, FAI schedules, and audit procedures. Attend project meetings and provide detailed quality status updates and reports. Analyze quality issues, identify root causes, and drive corrective actions. Coordinate with customers, suppliers, and internal teams across production and warranty phases. Manage project quality schedules and interface with Resident Inspectors. Ensure compliance with customer specifications, contract terms, and Kawasaki quality standards. Review and approve subcontractor/supplier documentation (PSI, FAI, audits, drawings, field reports). Monitor and report deviations, implement process improvements, and update procedures. Support Configuration Management planning, execution, and product delivery. Assist with subcontractor activity quality review and documentation. Travel domestically/internationally up to 30% to support project quality functions. Job Specifications Bachelor's Degree in Engineering (Master's preferred). Minimum five (5) years' experience in rail, aerospace, transportation, or heavy manufacturing. Knowledge of FAI, FMEA, ISO 9001, and source inspection processes. Strong communication, analytical, reporting, and computer skills. Ability to plan, coordinate, and manage workloads across multiple concurrent projects. Capable of working in both office and field/manufacturing environments. Work Environment Office and manufacturing floor settings. Frequent interaction with engineering, production, and customer teams. PPE required in production areas; must adhere to all safety protocols. Candidate Fit This candidate is a strong fit for Project Quality Engineering roles in complex manufacturing environments like rail, aerospace, automotive, and heavy industrial production. They have demonstrated capability in quality planning, regulatory compliance, supplier oversight, and customer interface management. With experience leading FAIs, audits, and corrective actions while supporting production schedules, they excel in driving continuous improvement, ensuring contract compliance, and maintaining high standards of safety, product quality, and documentation integrity. Their structured approach, technical acumen, and ability to manage project-based workloads make them a key contributor to high-complexity engineering programs. Company Overview Founded in 2010, Top Prospect Group was created with a focus on matching high-quality candidates with top-tier clients while fostering an environment where success is shared by all. In 2023, the company was acquired by HW Staffing Solutions, expanding its service offerings to include technology, engineering, and professional services. Qualified candidates are encouraged to apply immediately! Please include a clean copy of your resume, salary expectations, and availability with your application.

*For a quick application text APPLY1 to 82174* *About Dent Wizard* Dent Wizard is the nation's undisputed leader in automotive reconditioning services and vehicle protection products - and our success is the result of the great people who serve our customers. We're stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve. *Wheel Remanufacturing Technician - Dent Wizard | Cream Ridge, NJ* *Hourly Pay: $20-$21* *Location: Cream Ridge, NJ * *For easy apply: TEXT APPLY TO 82174* Check our video for more information: [ * **Put the Wheels Back in Motion. Be a Wizard.* Dent Wizard is seeking a * Wheel Remanufacturing Technician* to join our team in *Cream Ridge, NJ*. This is a great opportunity for someone who enjoys hands-on work, takes pride in precision, and thrives in a fast-paced environment. You'll work evening hours in our state-of-the-art wheel remanufacturing facility, restoring wheels to like-new condition using advanced tools and techniques. *Key Responsibilities* *Wheel Repair & Restoration (60%)* * Inspect wheels for damage, cracks, bends, and cosmetic issues * Disassemble wheels (remove tires, valve stems, etc.) * Clean, degrease, sand, and prep wheel surfaces * Weld, straighten, and apply filler materials as needed * Repaint and refinish wheels to match original or customer specifications * Balance wheels and reassemble components *Quality Control & Service Excellence (20%)* * Perform final inspections to ensure safety and appearance standards * Mix paint colors using standard formulas or charts * Operate CNC machines, tire changers, and wheel balancing equipment *Technical Support & Documentation (20%)* * Maintain records of refurbishing processes and customer specifications * Serve as a subject matter expert (SME) for wheel repair within the division * Communicate with customers regarding repair options and estimates *Required Competencies* * Teamwork and collaboration * Customer focus * Strong communication skills * Process and planning orientation *Qualifications* * High school diploma or equivalent * Experience in wheel refurbishing or automotive repair preferred (not required) * Manual dexterity and proficiency with hand/power tools * Ability to work independently with a strong work ethic * Willingness to work in an industrial setting and outdoors in various weather conditions * Valid driver's license and clean driving record *Physical Requirements* * Frequent standing, kneeling, bending, and squatting * Ability to lift up to 65 pounds * Work in well-ventilated automotive facilities * May be exposed to various weather conditions if mobile *Ready to keep things rolling? Apply now and become a Wizard with Dent Wizard.* The compensation offered for this position will depend on qualifications, experience, and geographic location. The starting compensation is expected to be: $20.00 -$22.00/ HourWe offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution). For more information on our benefit offerings, please visit our Dealer Tire Family of Companies [Benefits Highlights Booklet]( *EOE Statement: *Dent Wizard is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act*), or any other legally protected status, with respect to employment opportunities. *ADA Disclosure: Any candidate who feels that they may need an accommodation to complete this application, or any portions of same, based on the impact of a disability should contact Dent Wizard's Human Resources Department to discuss your specific needs. Please feel free to contact us at ...@dentwizard.com.

Our client, a well-established manufacturer serving regulated industries, is growing and seeking a Quality Inspector to join their 3rd shift. This position is ideal for someone who enjoys hands-on work and takes pride in maintaining high standards of quality. Product Quality Inspector - 3rd Shift (11PM-7AM) Training: 1st Shift (7AM - 3PM) for the first 3-6 months Responsibilities: · Perform hands-on product testing and inspections to ensure compliance with specifications · Accurately update and maintain product testing databases and quality documentation · Record data in both manual and electronic files · Communicate any non-conformance issues promptly to production teams and supervisors · Assist with documentation control and manage retain samples and related records Requirements: · Previous hands-on experience in Quality Inspection or a similar role · Strong attention to detail, organized, and results-oriented · Ability to work independently and collaboratively · Basic math skills and computer literacy required · Must be able to train on 1st shift for 3-6 months then transitioning to 3rd shift · Familiarity with ISO 9001 or other international quality standards is advantageous Why You'll Love It Here: This family-owned company offers a union environment, a culture focused on employee development, and real opportunities for career growth. If you're detail-driven, adaptable, and ready to grow, this is the role for you! Benefit offerings for full-time employment include 10 paid Holidays, and 10 PTO days, prorated based on hire date within the calendar year. Also included: Medical, dental, vision, term life and AD&D insurance, long-term disability, employee assistance program, onsite gym, and a 401k plan. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ******************************************* The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act • Los Angeles City Fair Chance Ordinance • Los Angeles County Fair Chance Ordinance for Employers • San Francisco Fair Chance Ordinance

Role: QA Engineer App Sr Advanced Tech hybrid 3 days onsite. Duration: Contract Mandatory Skills & Qualifications 10+ years of relevant client-facing experience in QA/testing roles (excluding training periods) Minimum 5 years of on-site client experience in similar technology and domain Educational Requirement: Bachelor's degree in Technology (Master's preferred) Strong hands-on experience with the MERN Stack (MongoDB, Express, React, Node.js) Proficiency in programming/scripting: Java and JavaScript Extensive experience with modern automation tools such as: Selenium WebDriver Cypress or other industry-standard automation frameworks Strong understanding of QA methodologies, SDLC, STLC, Agile/Scrum processes Experience building reusable automation frameworks (UI and/or API) Experience in Performance Testing tools (e.g., JMeter, Locust) - preferred for Group B

Artech is the 10th Largest IT Staffing Company in the US, according to Staffing Industry Analysts' 2012 annual report. Artech provides technical expertise to fill gaps in clients' immediate skill-sets availability, deliver emerging technology skill-sets, refresh existing skill base, allow for flexibility in project planning and execution phases, and provide budgeting/financial flexibility by offering contingent labor as a variable cost. Job Description The incumbent will have responsibility to ensure that all aspects of the operational business comply with cGMP legal and regulatory requirements, the Client Pharma Corporate Quality Manual and Policies, and site procedures and business requirements. Coordinates and performs batch record issuance for internally manufactured products Reviews and approves manufacturing and QC related documents for raw material disposition. Reviews and approves manufacturing and QC related documents for manufactured media Performs administrative functions for filing and maintenance of records between QA operations and Document Control Center Support cGMP and associated OJT training to QA and other departments to improve right the first time (RTFT), high quality performance. Control costs within department to meet budget. Complete job-related training in electronic database system along with GMP, safety, and Ethics & Compliance course requirements. Perform or support any other tasks necessary to maintain the product quality and site cGMP compliance, as needed. Skills:0-3 years GMP manufacturing and/or QA related experience Education: BS/BA in Biological Sciences or equivalent relevant career experience Qualifications Skills: 0-3 years GMP manufacturing and/or QA related experience Education: BS/BA in Biological Sciences or equivalent relevant career experience Additional Information Sneha Shrivastava Technical Recruiter (Clinical/Scientific) Artech Information Systems LLC 360 Mt. Kemble Avenue, Suite 2000 | Morristown, NJ 07960 Office: ************ | Fax: ************ Connect with us on - LinkedIn | Facebook | Twitter

Job Description **Job Title: Manufacturing Quality Technician II ** **Job Duration: 6 Months Contract - W2 ** 2 Henderson Dr, West Caldwell, NJ 07006 (Onsite) ** **Note: ** **Schedule and Shift: 9-80 A|1st Shift|07:30 AM ** **This position will also support Saddle River NJ and Huntsville AL but will be based out of West Caldwell ** **Description: ** Mercury Systems is seeking a talented individual to help drive cutting edge technology to mission critical aerospace and defense applications. As a Quality Technician, you will support our team of quality engineers by providing both technical and administrative assistance. You will be responsible for ensuring the accuracy of production records, discrepancy reports, and supplier documentation. Additionally, you will collaborate with operations, quality, purchasing, and stockroom to help achieve team objectives and drive continuous improvement. **Job Responsibilities: ** Accurately completes AS9102 First Article Inspection Report (FAIR) and other dimensional inspection reports. Accurately reviews AS9102 First Article Inspection Report (FAIR) and other dimensional inspection reports from suppliers. Accurately compiles and completes End Item Data Packages (EIDP) Administrate and maintain calibration system complying to AS9100 and ISO 17025 for equipment. Updating calibration system cycle inventory across sites. Serve as the ESD coordinator for the site Perform comprehensive ESD program audits per ANSI/ESD S20.20 standards Inspect all grounding systems, flooring, and workstations, carts and shelving units Verify compliance with Mercury Systems' internal ESD policies Test equipment calibration & certification Data Review, Reporting & Corrective Actions Navigates internal company software and database systems to gather quality data information. Administrate and maintain calibration system to current updates. Create and submit Purchase Requisition (PR) to procurement department for Purchase Order release. Request quotes from external calibration houses. Coordinate with operations on site calibration schedule for stationary equipment. Support QA receiving inspection, in-process inspection and final inspection activities Interprets and understand drawings, specifications, customer requirements Works effectively with and communicates with various departments including operations, planning, quality, and QC inspection KPI/Metrics Review & Reporting Maintain and ensure accurate record-keeping of production documentation Collect and Index supplier-provided documentation for components and services Engagement with process audits, reviews, and revisions. **Required Qualifications: ** **Typically requires a minimum of three (3) years of quality assurance experience ** **High School diploma or General Education Degree (GED) ** **Previous AS9102 First article inspection experience ** **Previous AS9100 Quality Management Standard experience. ** **Previous IPC-A-610 and IPC-J-STD-001 training and/or certification. ** **Familiar with GD&T terminologies print reading ** Experience with electrical and mechanical inspection tools. Strong PC skills with Microsoft Office - Excel, Word, Power Point, Minitab, JMP and database systems Must currently have or be eligible to obtain a DoD Secret clearance **Preferred Qualifications: ** **Experience in aerospace and defense industry ** **Experience with any of the following business application systems - Oracle, Factory Logics, Power BI, Tableau, Agile, Net-Inspect **

At Coco, we're revolutionizing last-mile delivery with autonomous robots, making deliveries faster, more efficient, and more sustainable. We're looking for a proactive and tech-savvy Office Manager to oversee our facility operations, ensuring our teams have the resources and environments needed to thrive. About the Role As a Fleet Quality Technician, you'll be the backbone of our robot operations, assembling, maintaining, and deploying delivery robots with precision while leading efforts to diagnose and resolve hardware, electrical, and IoT issues. You'll design repeatable solutions that scale, perform hands-on repairs and testing, and provide critical feedback that drives future hardware improvements. This role is fast-paced, technical, and highly dynamic-perfect for someone who thrives on problem-solving, takes pride in getting things right the first time. What You'll Do Serve as the technical lead during robot deployments, identifying and resolving mechanical, electrical, and software integration issues in real time Own the root-cause analysis and resolution process for fleet quality issues that impact launch success or fleet uptime Design and implement scalable SOPs, tools, and diagnostics for frontline teams to reduce downtime and improve serviceability Collaborate with Engineering, Supply Chain, and Field Operations to close the loop between product issues and fixes Provide structured feedback to Product & Engineering teams and help pilot new hardware, software, or process changes in the field Build lightweight dashboards, diagnostic logs, and technical documentation that can be adopted across teams About You 4-6+ years in hardware operations, fleet maintenance, or field engineering with a focus on mechanical and electrical systems Deep experience troubleshooting mechanical, electrical, and IoT (connectivity/sensor/data) issues Strong systems thinking mindset-you see the big picture and design processes to solve root causes, not just symptoms Independent, self-motivated, and solution-oriented-you don't wait to be told what's broken Excellent communicator with the ability to work fluidly across technical and non-technical stakeholders Familiarity with SQL, JIRA, inventory systems (e.g., Oracle ERP), and basic data analysis to spot trends and validate fixes Comfortable in fast-moving environments and field-based problem-solving scenarios Bonus Points Prior experience in robotics, micromobility, autonomous delivery, or connected fleet operations History of developing technical SOPs, diagnostic workflows, or cross-team enablement tools Experience working closely with Engineering and Product teams to iterate on hardware or firmware in production environments

Benefits: 401(k) Dental insurance Health insurance Paid time off Seeking a Coffee Equipment Technician who wants to achieve excellence in themselves and be a member of a winning team. Handy person willing to learn and grow their skills in diagnostics, repairs and maintenance of commercial coffee/tea brewers, espresso machines, and coffee related foodservice equipment. Experience is greatly valued. Field work in the NY Metro area and Jersey City shop. Self-starter, with strong organizational skills. Ability to work with team members assisting customers to resolve coffee and equipment issues. Responsibilities: Troubleshoot, repair, install, adjust coffee and espresso brewing equipment Train customers in basic operations and maintenance from the user perspective Perform routine preventative maintenance as well as full refurbishment in shop and field Respond to work order requests in a timely fashion Work with team members and customers to resolve technical problems Ensure coffee quality standards at the point of sale Adhere to all company safety policies and procedures Job description is not intended to cover every single requirement of the job. The company reserves the right to change job duties at any time. Qualifications: Mechanical and electrical skills needed to repair and maintain equipment Desire to perform to the highest standards of excellence Diplomacy and communication skills needed to provide quality customer experience Ability to handle physical workload and lifting heavy equipment in excess of 50 lbs. Must have valid clean Drivers license Fluent in English both in speaking and writing . Salary Range: 50-70K, based upon experience Company Description: Kobrick Coffee Co. Inc. is a 105 year old Specialty Coffee Roaster based in the NYC area since 1920. Clients include Coffee Shops and Cafes, Restaurants, Hotels, and other food service venues who desire high quality coffee and top-level service and support from their coffee partner/roaster.

Raycap, Inc. is seeking a highly motivated Quality Inspector. In this role, the Quality Inspector inspects components, sub-assemblies, and finished products received and/or built internally. This position works with Quality Management to implement the proper sampling plans based on component specifications, inspection plans, or customer supplied requirements and to provide guidance on required quality tools, methods, and data to assure that shipped product fulfills all customer specifications and quality requirements. This position monitors and maintains Raycap quality processes to assure continual 100% customer satisfaction. Shift: Monday - Friday (7:00 a.m. - 3:30 p.m.) with overtime as required. Primary Job Responsibilities Collects quality data as required to derive quality objectives Executes and maintains comprehensive quality product inspections Serves as a manufacturing focal point for intelligent analysis of quality issues, determining true root causes and implementation of permanent corrective and preventive actions Follows and promotes the use of and implementation of internal quality standards and procedures Reviews documentation for compliance with quality standards Inspects First Articles, incoming components, raw materials, fabricated parts, and in-process assemblies and subassemblies, products per Inspection Plans and Specification Requirements Conducts subassembly tests as required to ensure quality products Uses measuring equipment such as calipers and gauges Audits and monitors quality requirements in accordance with the company's quality assurance policies and customer specifications Documents and reports inspection findings, results, and monitors corrective actions to inspection findings Regular adherence to performance of applicable procedures in the Quality Management Systems (QMS), Environmental Management (EMS), and Occupational Health & Safety standards (OHSAS); ensuring processes remain sustainable, suitable, and effective in relation to the position Continuous assessment of opportunities for improvement and any needed changes to management systems Qualifications Hands-on quality and manufacturing experience in an ISO certified environment. Proficient in MS Office, Access, Outlook, and Adobe programs Experience with Document Control software Familiarity with SAP, ISO-9001, knowledge and application of DFx, FMEA or similar Quality Systems is a plus Who We Are Raycap, Inc. creates products that protect and support the world's most valuable assets. We support advanced solutions for telecommunications, renewable energy, transportation, defense, and other applications worldwide. We offer A competitive benefit package Paid Time Off from day one 10 annual company paid holidays A Tuition Reimbursement program A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, gender identity, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

SUMMARY/OBJECTIVE (Basic purpose of job) The Quality Technician primary responsibility is for carrying out the quality control lab testing for the bottling lines as well as the calibrating and setting up the lab equipment and ensuring results are recorded accurately on computer systems and data sheets. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed must be representative of the knowledge, skills, minimum education, training, licensure, experience and/or ability required. JOB RESPONSIBILITIES Perform quality function audits on all production lines. Ensure products produced conform to specification, food safety, have Good Manufacturing Practices, and adhere to relevant regulatory requirements. Perform all microbial sampling and testing for incoming raw materials and finished products. Advise production on out of specification packaging, raw materials and process deviations. Ensure all production operations operate to highest quality standards Be responsible for plating of samples, analyzing, interpreting and reporting results for all bottling, tanks. Record production information as required. Ensure accurate records are kept and maintained of all specifications and test results. Keep laboratory equipment maintained and operating efficiency and safely according to all health and safety standards. Support cleanliness and sanitation of Quality Lab, Batching Area, Production lines, Sugar and RO room. Keep all work areas clean and orderly. All other duties, as required or needed. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. While performing the duties of this job, the employee is regularly required to talk or hear and see. The employee frequently is required to stand; walk; use hands to finger, handle or feel and reach with hands and arms. The employee must regularly lift and/or move objects up to 40 pounds. JOB REQUIREMENTS HSD, College Degree preferred 2-3 years' experience as a Lab Technician Excellent attention to details Good interpersonal and communication skills Ability to work as part of a team Good statistical and numerical ability Please note this Job Description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

About Us: The Motherson Group is one of the 15 largest full system solutions providers to the global automotive industry, serving multiple further industries, such as rolling stock, aerospace, medical, IT, and logistics, with over 190,000 employees across 44 countries worldwide. About The Job: Apply customer & SAS quality standards on shop floor through inspections, instructions & training Support & maintain test planning and checking procedures Gauge checks Support release of series assembly & conduct product audits with documentation Evaluate scrap parts and issue Quality Alerts for customer complaints Authorize block/release of production parts & manage emergency data Follow work, test & measuring instructions; handle tools accurately Solve quality issues using ACT QRCI methods Update defect code list & maintain control plans Liaise with production team on quality issues Communicate with customers/suppliers on complaints Attend risk management/P-FMEA meetings & workstation rating Qualifications: Possibly experience in the automotive industry; potentially also 1st time experience 3-5 years of experience in process quality area Product knowledge Process knowledge Control plan Technical undestanding Problem-solving experience & methodologies What We Offer: Competitive Pay Medical Benefits 401K Paid Time Off

Job Description BASIC FUNCTIONS Entry level position. Performs basic counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility Ability to complete a full analysis on all EEE Devices within the Laboratory Ability to learn and subsequently operate all test equipment within the Laboratory Department Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested. Identify nonconformity to provide data to Quality Manager. Ability to communicate, document and report all nonconformity within internal system and direct supervisor. Ability to conduct work as assigned by senior management. Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day. Ability to understand industry traceability and documentation requirement as required for each industry Ability to evaluate and differentiate between various commodity types. Review and implement detailed inspection reports to provide all information regarding product testing and inspection Ability to use general inspection gages, Ex. Calipers, Micrometers, etc. Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements. Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity. Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements. For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports. Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC - Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts - Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Daily throughput (inspections/Lab steps completed) Quality Issue detections (Incoming NCM ) Outgoing Quality (customer Escapes) IDEA Certification and knowledge implementation Use of GD&T and FAI knowledge for timely FAIR completion Issue communication Daily 6S/ESD/FOD policies followed Ability to find datasheets/drawings information on CTG Systems Diversity of inspections (EC/EM/HA/Hardware/etc) Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY High School Diploma or equivalent 1 year of manufacturing or quality experience is a plus but not required Must be proficient in English, both written and verbal communication skills Good arithmetic skills are required Mechanical aptitude desired Working knowledge of measurement instruments: i.e., calipers, etc. Basic proficiency of Microsoft Excel and Word Must complete IDEA-ICE-3000 Certification within 6 months of hire. Able to pass internal testing and training to meet internal requirements Must demonstrate acceptable vision requirement.

Technology is at the heart of Disney's past, present, and future. Disney Entertainment and ESPN Product & Technology is a global organization of engineers, product developers, designers, technologists, data scientists, and more - all working to build and advance the technological backbone for Disney's media business globally. The team marries technology with creativity to build world-class products, enhance storytelling, and drive velocity, innovation, and scalability for our businesses. We are Storytellers and Innovators. Creators and Builders. Entertainers and Engineers. We work with every part of The Walt Disney Company's media portfolio to advance the technological foundation and consumer media touch points serving millions of people around the world. Here are a few reasons why we think you'd love working here: Building the future of Disney's media: Our Technologists are designing and building the products and platforms that will power our media, advertising, and distribution businesses for years to come. Reach, Scale & Impact: More than ever, Disney's technology and products serve as a signature doorway for fans' connections with the company's brands and stories. Disney+. Hulu. ESPN. ABC. ABC News…and many more. These products and brands - and the unmatched stories, storytellers, and events they carry - matter to millions of people globally. Innovation: We develop and implement groundbreaking products and techniques that shape industry norms, and solve complex and distinctive technical problems. Product Engineering Product Engineering is a unified team responsible for the engineering of Disney Entertainment & ESPN digital and streaming products and platforms. This includes product engineering, media engineering, quality assurance, engineering behind personalization, commerce, lifecycle, and identity. We are seeking a talented, hard-working person for a part-time position in the Media Experience Department. We are seeking an experienced, dedicated Associate Quality Control Technician to join our team. In this position, you will maintain quality standards by approving incoming materials, in-process production, finished products, and recording the results. Excellent communication and leadership skills are a must, as well as a keen attention to detail. Our environment is incredibly dynamic, fast-paced, and sophisticated. The ideal candidate has a background in video quality control and is extremely comfortable working in Mac OS X. Required Skills • 1-2 years related work experience Understanding of mac OS and Windows operating systems Must be able to work a minimum of 28 hours per week Must have an exemplary attention to detail. Must possess strong communication skills. Must possess solid organizational skills. The candidate must be self-motivated. The candidate must have a strong ability to multitask and adapt to new situations. A solid computer and technical background, with experience working in new media and online organizations. Familiarity with streaming and broadcast media Familiarity with Google apps Must be a team player, with an enthusiastic, congenial, and committed employee. Preferred Skills Bachelor's degree or equivalent Fluency in languages other than English is a big plus particularly Thai, Vietnamese, Czech, Slovak, or Hungarian Helpful skills include a background in encoding video for the web An understanding of various video codecs, notably H.264 Job Responsibilities Review and analyze video and audio files for visual and auditory defects (e.g., pixelation, audio sync issues, color correction errors). Verify subtitles accuracy. Log and document quality issues, generating QC reports and flagging critical errors for immediate attention. Act as mentor to less experienced quality control technicians. Contribute to special projects requiring greater experience and knowledge of quality control methods and workflows. The hiring range for this position in New York is $43,000 - $44,00 per year based on a 40 hour work week. The amount of hours scheduled per week may vary based on business needs. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered. Job Posting Segment: PE - Media Platform Job Posting Primary Business: PE - Media Platform - Media Experience Primary Job Posting Category: Quality Control Employment Type: Part time Primary City, State, Region, Postal Code: New York, NY, USA Alternate City, State, Region, Postal Code: Date Posted: 2025-11-25

NYC Health + Hospitals is the largest public health care system in the nation. We are a network of 11 hospitals, trauma centers, neighborhood health centers, nursing homes, post-acute care centers, and correctional health services. We are a home care agency and a health plan, MetroPlus. Our health system provides essential services to 1.4 million New Yorkers every year in more than 70 locations across the city's five boroughs. Our diverse workforce of more than 42,000 employees are uniquely focused on empowering New Yorkers. NYC Health + Hospitals/Correctional Health Services is one of the nation's leading correctional health care systems in quality of and innovations to care, and access from pre-arraignment through compassionate release. In-jail services include medical, nursing, mental health, substance use treatment, social work, dental and vision care, discharge planning, and reentry support. In addition to providing direct patient care in the jails, CHS leverages the resources of the nation's largest municipal health care system to help discharged patients successfully return to their communities. CHS is also a pivotal partner in New York City's criminal justice reform efforts. Work Shifts Time: 8a-4p Days: Mon-Fri Facility: CDU-WF facility on Rikers Island Duties & Responsibilities The Quality Assurance (QA) Radiological Technologist position encompasses responsible, administrative and clinical activity of varying degrees of latitude. Clinical level judgement is needed in the daily supervision of radiological functions and patient care, and departmental projects. Responsibilities include: Review exam orders, consult with radiologist, schedule patients and arrange for transportation as indicated. Identify patient and document all information pertinent to final report in the RIS and on images (PACS). Prepare all patients (infants, children, adolescents, adults and geriatric) for radiological procedures requested by the clinician. Arrange for proper protection of patients, public and staff from infectious diseases/materials. Perform all general diagnostic imaging and routine examination in CT and Angiography. Assists in performing daily checks of radiographic imaging equipment, immobilization devices and other necessary accessories. Enters data and maintains documents and logs as required and mandated by the department QA guidelines and various regulatory agencies. Maintains adequate stocks of supplies and materials needed for use in the department. Checks equipment for defects prior for use and assures proper use of such equipment through instruction and review. Report any unexpected patient incidents in accordance with the occurrence report protocol. Maintain and exercise all mandated radiation safety regulations. Maintain basic care of all the imaging equipment. All malfunctions are to be reported to management staff whether mechanical, electrical or suspect and service request documentation completed. Maintain a clean and safe work environment for both patients and staff. Perform other duties as deemed necessary (by supervisory or administrative staff) in the event of emergencies or disasters. Continue professional growth and development of job-related skills on an ongoing basis. Participate in continuing education activities. Ensure all examinations are accessioned, documented and sent to PACS for reading. Monitor PACS and RIS incomplete worklists to ensure all exams are completed. In accordance with HIPAA (the Health Insurance Portability and Accountability Act), staff members will exercise due diligence in ensuring patient privacy and confidentiality. Identifies activities that the network has implemented to promote patient safety and takes all necessary precautions to ensure a safe environment for patients, visitors and staff. In addition to the Radiology Technologist job functions, the QA Technologists is responsible for the following: Organize and file maintenance reports for each building in regards to dentistry and radiology x-ray equipment and ensure dentistry and x-ray equipment follow the Department of Health codes, policies and procedures. Participates in quality assurance activities, including coordination, control and maintenance of technical equipment. Establish a daily/weekly/monthly quality control routine for monitoring, evaluating, and maintenance of X-ray equipment to ensure optimal performance and stability. Documenting and maintaining records for the quality control program in accordance with applicable regulations, legal requirements, accrediting agencies and recommendations from equipment manufacturers. Performs research and participates in special projects involving evaluation of equipment and delivery of service. Work with our radiologists to obtain updated documentation of primary diagnostic monitors. Distribute/collect dosimeter badges from each employee/facility that works with x-ray equipment. Recommends area assignment of personnel to coordinate activities within the department with other activities and services and represents the department in interdepartmental operations and meetings. May be assigned duties and responsibilities of X-ray Director in regards to radiology department workflow. Minimum Qualifications Assignment Level III 1. For Supervisory Assignments: a valid license and current registration to practice Diagnostic Radiography as a Radiologic Technologist issued by the NYSDOH; and two (2) years of Radiologic Technologist experience performing duties consistent with Assignment Levels I and II, one (1) year of which must have been in a supervisory capacity. 2. For Specialized Imaging Assignments: a valid license and current registration to practice Diagnostic Radiography as a Radiologic Technologist issued by the NYSDOH; and possession of a current advanced- level certification for the performance of these procedures. Department Preferences Possession of a current valid license as a General Radiological Technologist issued by the State of New York. A minimum of two years of experience as a Radiological Technologist. A current member of the American Registry of Radiologic Technologists (ARRT). Valid BLS required. Must possess a valid driver's license. Must be proficient in Microsoft Office Suite. Additional Salary Compensation All Radiologic Technologists in Assignment Levels II and III shall receive a differential of $7,500 per annum to be cross-trained on different modalities of radiologic imaging and to be cross-assigned (once trained) to different imaging settings depending on patient volume and staffing needs within a facility. Benefits NYC Health and Hospitals offers a competitive benefits package that includes: Comprehensive Health Benefits for employees hired to work 20+ hrs. per week Retirement Savings and Pension Plans Paid Holidays and Vacation in accordance with employees' Collectively bargained contracts Loan Forgiveness Programs for eligible employees College tuition discounts and professional development opportunities College Savings Program Union Benefits for eligible titles Multiple employee discounts programs Commuter Benefits Programs

Artech is the 10th Largest IT Staffing Company in the US, according to Staffing Industry Analysts' 2012 annual report. Artech provides technical expertise to fill gaps in clients' immediate skill-sets availability, deliver emerging technology skill-sets, refresh existing skill base, allow for flexibility in project planning and execution phases, and provide budgeting/financial flexibility by offering contingent labor as a variable cost. Job Description 1. The incumbent will have responsibility to ensure that all aspects of the operational business comply with cGMP legal and regulatory requirements, the Client Pharma Corporate Quality Manual and Policies, and site procedures and business requirements. 2. Coordinates and performs batch record issuance for internally manufactured products Reviews and approves manufacturing and QC related documents for raw material disposition. 3. Reviews and approves manufacturing and QC related documents for manufactured media Performs administrative functions for filing and maintenance of records between QA operations and Document Control Center Support cGMP and associated OJT training to QA and other departments to improve right the first time (RTFT), high quality performance. 4. Control costs within department to meet budget. Complete job-related training in electronic database system along with GMP, safety, and Ethics & Compliance course requirements. 5. Perform or support any other tasks necessary to maintain the product quality and site cGMP compliance, as needed. Skills:0-3 years GMP manufacturing and/or QA related experience 6. Education: BS/BA in Biological Sciences or equivalent relevant career experience Additional Information Regards, Anuj Mehta ************

At Coco, we're revolutionizing last-mile delivery with autonomous robots, making deliveries faster, more efficient, and more sustainable. We're looking for a proactive and tech-savvy Office Manager to oversee our facility operations, ensuring our teams have the resources and environments needed to thrive. About the Role As a Fleet Quality Technician, you'll be the backbone of our robot operations, assembling, maintaining, and deploying delivery robots with precision while leading efforts to diagnose and resolve hardware, electrical, and IoT issues. You'll design repeatable solutions that scale, perform hands-on repairs and testing, and provide critical feedback that drives future hardware improvements. This role is fast-paced, technical, and highly dynamic-perfect for someone who thrives on problem-solving, takes pride in getting things right the first time. What You'll Do Serve as the technical lead during robot deployments, identifying and resolving mechanical, electrical, and software integration issues in real time Own the root-cause analysis and resolution process for fleet quality issues that impact launch success or fleet uptime Design and implement scalable SOPs, tools, and diagnostics for frontline teams to reduce downtime and improve serviceability Collaborate with Engineering, Supply Chain, and Field Operations to close the loop between product issues and fixes Provide structured feedback to Product & Engineering teams and help pilot new hardware, software, or process changes in the field Build lightweight dashboards, diagnostic logs, and technical documentation that can be adopted across teams About You 4-6+ years in hardware operations, fleet maintenance, or field engineering with a focus on mechanical and electrical systems Deep experience troubleshooting mechanical, electrical, and IoT (connectivity/sensor/data) issues Strong systems thinking mindset-you see the big picture and design processes to solve root causes, not just symptoms Independent, self-motivated, and solution-oriented-you don't wait to be told what's broken Excellent communicator with the ability to work fluidly across technical and non-technical stakeholders Familiarity with SQL, JIRA, inventory systems (e.g., Oracle ERP), and basic data analysis to spot trends and validate fixes Comfortable in fast-moving environments and field-based problem-solving scenarios Bonus Points Prior experience in robotics, micromobility, autonomous delivery, or connected fleet operations History of developing technical SOPs, diagnostic workflows, or cross-team enablement tools Experience working closely with Engineering and Product teams to iterate on hardware or firmware in production environments

Job Description Job Title: Manufacturing Quality Technician II Job Duration: 6 Months Contract - W2 Note: Schedule and Shift: 9-80 A|1st Shift|07:30 AM This position will also support Saddle River NJ and Huntsville AL but will be based out of West Caldwell Description: Mercury Systems is seeking a talented individual to help drive cutting edge technology to mission critical aerospace and defense applications. As a Quality Technician, you will support our team of quality engineers by providing both technical and administrative assistance. You will be responsible for ensuring the accuracy of production records, discrepancy reports, and supplier documentation. Additionally, you will collaborate with operations, quality, purchasing, and stockroom to help achieve team objectives and drive continuous improvement. Job Responsibilities: Accurately completes AS9102 First Article Inspection Report (FAIR) and other dimensional inspection reports. Accurately reviews AS9102 First Article Inspection Report (FAIR) and other dimensional inspection reports from suppliers. Accurately compiles and completes End Item Data Packages (EIDP) Administrate and maintain calibration system complying to AS9100 and ISO 17025 for equipment. Updating calibration system cycle inventory across sites. Serve as the ESD coordinator for the site Perform comprehensive ESD program audits per ANSI/ESD S20.20 standards Inspect all grounding systems, flooring, and workstations, carts and shelving units Verify compliance with Mercury Systems' internal ESD policies Test equipment calibration & certification Data Review, Reporting & Corrective Actions Navigates internal company software and database systems to gather quality data information. Administrate and maintain calibration system to current updates. Create and submit Purchase Requisition (PR) to procurement department for Purchase Order release. Request quotes from external calibration houses. Coordinate with operations on site calibration schedule for stationary equipment. Support QA receiving inspection, in-process inspection and final inspection activities Interprets and understand drawings, specifications, customer requirements Works effectively with and communicates with various departments including operations, planning, quality, and QC inspection KPI/Metrics Review & Reporting Maintain and ensure accurate record-keeping of production documentation Collect and Index supplier-provided documentation for components and services Engagement with process audits, reviews, and revisions. Required Qualifications: Typically requires a minimum of three (3) years of quality assurance experience High School diploma or General Education Degree (GED) Previous AS9102 First article inspection experience Previous AS9100 Quality Management Standard experience. Previous IPC-A-610 and IPC-J-STD-001 training and/or certification. Familiar with GD&T terminologies print reading Experience with electrical and mechanical inspection tools. Strong PC skills with Microsoft Office - Excel, Word, Power Point, Minitab, JMP and database systems Must currently have or be eligible to obtain a DoD Secret clearance Preferred Qualifications: Experience in aerospace and defense industry Experience with any of the following business application systems - Oracle, Factory Logics, Power BI, Tableau, Agile, Net-Inspect -- Thanks and Regards, Jaswanth, Technical Recruiter *********************************** Phone- ************** | || | Global Workforce Solutions | Certified MBE & EDGE Company | Microsoft Partner Direct Hire | Contingent Staffing | SOW Services | Clinical Staffing| IT Consulting | Payrolling You should be proficient in: IPC-A-610 IPC Joint Industry Standard (IPC-J-STD) AS9100 AS9102 High School / GED AS9100 Experience Machines & technologies you'll use: ERP Software (Oracle) Salary info: $25 - $27 / hr

Job Description BASIC FUNCTIONS Mid-level position. Performs counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested. Ability to complete a full analysis on all EEE Devices within the Laboratory Ability to operate all test equipment within the Laboratory Department Identify nonconformity to provide data to Quality Manager. Ability to communicate, document and report all nonconformity within internal system and direct supervisor. Ability to conduct work as assigned by senior management. Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day. Ability to understand industry traceability and documentation requirement as required for each industry Ability to evaluate and differentiate between various commodity types. Review and implement detailed inspection reports to provide all information regarding product testing and inspection Compile, review data and complete test reports IAW CTG Standards Ability to use general inspection gages, Ex. Calipers, Micrometers, etc. Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements. Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity. Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements. For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports. Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections. Comply with all requirements of the AS9120, ISO 9001, ASA-100, and IDEA QMS 9090 Quality Management System and criteria of CCAP-101, AS6081, AC7402 and ANSI/ESD-S20.20 STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC - Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts - Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Daily throughput (inspections/Lab steps completed) Quality Issue detections (Incoming NCM ) Outgoing Quality (customer Escapes) IDEA Certification and knowledge implementation Use of GD&T and FAI knowledge for timely FAIR completion Issue communication Daily 6S/ESD/FOD policies followed Ability to find datasheets/drawings information on CTG Systems Diversity of inspections (EC/EM/HA/Hardware/etc) Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY High School Diploma or equivalent with a minimum of 2 years' experience performing in-process and final inspection preferably in a machining, automotive or aerospace business Must be proficient in English, both written and verbal communication skills Good arithmetic skills are required Mechanical aptitude desired Ability to correctly use and interpret basic measuring tools including weight gauge, micrometer, caliper scale (linear), gauge blocks, thread gauges, and comparative standards Basic proficiency of Microsoft Excel and Word Independent; can work with limited supervision and direction Must complete IDEA-ICE-3000 Certification within 6 months of hire. Able to pass internal testing and training to meet internal requirements ASQ CQI certified or must completed certification within 1 year of accepting position Strong Electronics inspection knowledge preferred Must demonstrate acceptable vision requirement.