Quality technician jobs in Cranston, RI

Location: Rochester MA (100% On-site), 1st shift only 6:30A-3:30P M-F, salary range $72K-$82K, full-time role: health insurance with an HRA, dental, vision, LTD, and a 401(k) retirement plan with an employer match. 3 weeks PTO, 1 week sick. Generous relocation package offered. Qualified candidates are encouraged to apply. Large precast concrete supplier in Massachusetts and New Hampshire, providing high-quality products for over 70 years. Their extensive product range includes septic tanks, manholes, drainage structures, bulkheads, curbing, residential steps, and retaining wall systems, all crafted to precise specifications. They cater to engineers, contractors, and homeowners, emphasizing superior performance and exceptional customer service. The Quality Control Technician (“QC Technician”) will work within the production plant and is ultimately responsible for product testing. The QC Tech will assist in the execution of quality control processes, procedures and protocol associated with the production of pre and post concrete pours. Responsibility Responsible for ACI concrete field tests Responsible for quality control inspections in manufacturing plant Inspect forms before pouring (Pre-Pour). Inspect product after removed from forms (Post-Pour) Notifies Production Supervisor if deficiencies are found. Perform and/or schedule repairs on products as needed. Housekeeping - maintain a clean work area. Including cleanliness within breakroom, restroom, and general facility areas. Expected to maintain knowledge of precast plant techniques and procedures. May assist with precast production operation as needed. Characteristics Always committed to safety. Maintain a safe work area. Follow safe work practices as outlined in the Safety Program. Always committed to quality. Follow and implement quality control measures. Excellent attendance. Reliable means of transportation to and from work. Ability to learn, organize and prioritize work and handle multiple tasks. Outstanding attitude, honesty, and ethic at all times. Expected to use sound judgment, diplomacy, and discretion. Work independently or cooperatively with others. Self-drive in carrying out the functions of the job. Requirements: ACI Concrete Field-Testing Grade 1 Certified (preferred) NPCA PQS Training Must be at least 18 years of age per federal guidelines. Good communication skills, both verbal and written to all levels of staff Ability to remain focused in busy environment. Computers and tablets skills in order to perform tasks. Ability to read blueprints and sketches.

Our client is seeking a POS Quality Engineer to join their team! This position is located in Canton, Massachusetts. Execute functional testing for the client's POS systems in a lab environment Validate new POS features, patches, upgrades, and configuration changes Troubleshoot issues across POS hardware, networking, integrations, and payment systems Review logs, identify root causes, and escalate defects to internal teams and vendors Collaborate with vendors delivering POS products to ensure quality and readiness Support daily version testing, weekly releases, and continuous enhancements Maintain test cases, regression suites, and documentation Ramp up on the clients POS systems, environments, and workflows Execute manual testing independently and efficiently Understand integration points with kiosk, mobile apps, loyalty, and payments Build relationships with product, engineering, and vendor teams Contribute to expanding and maintaining POS test automation frameworks Improve test coverage, defect identification, and issue resolution speed Work independently with minimal oversight while communicating affectively Support performance-related testing for high-volume transaction scenarios Help streamline testing workflows to support frequent deployments Desired Skills/Experience: 5+ years of POS Quality Engineering experience Hands-on experience with any POS system such as: Aloha, Toast, NCR, Oracle Symphony, or other enterprise/custom POS systems Experience with payment systems such as: VeriFone, kiosk integrations, loyalty platforms, mobile ordering, and web integrations Strong manual testing proficiency with the ability to execute tests quickly and accurately Ability to troubleshoot logs, hardware, and light networking issues Experience collaborating with third-party vendors on POS deliverables Familiarity with automation frameworks and ability to contribute to automation improvements Prior experience working in a POS lab environment (devices, staging stores, simulators) Strong communication, organization, and self-management skills Benefits: Medical, Dental, & Vision Insurance Plans Employee-Owned Profit Sharing (ESOP) 401K offered The approximate pay range for this position is between $55.00 and $65.00. Please note that the pay range provided is a good faith estimate. Final compensation may vary based on factors including but not limited to background, knowledge, skills, and location. We comply with local wage minimums.

Job Title: Manufacturing Technician I (Quincy Plant) Job Title: Mfg. Technician Department / Division: Quincy Plant / Manufacturing Paygrade: NXA09 Hourly Rate: $23.28/hour What do we need: We are looking for a Manufacturing Technician to join our Quincy Plant. What's special about this job: The Quincy Plant is responsible for the extraction and concentration of nutrients for our Nutrilite Brand. The Quincy plant runs 24-hours a day, six days a week. Shift schedules are from 4:00am to 4:30pm, or 4:00pm to 4:30am. This role would have a shift schedule of 36-hours a week, Monday - Wednesday and Thursday - Saturday, rotating every ten weeks. As a Manufacturing Technician in the plant, you will be part of a collaborative team, learning all aspects of the plant's operations. This role will have a focused career progression with a skill development system that allows for multiple avenues to promotion. How you would contribute to the role: In this role, you will be primarily responsible for learning and operating equipment used to process liquid concentrate into dried intermediate product. The plant handles the extraction and concentration process - from prepping the product, to running the extraction and concentration equipment, to inline QA testing, to cleaning and sanitization of all the equipment. Since this is a GMP regulated plant, it will be important to complete and maintain all required records and documentation. As you develop in your career, you will train other team members on proper standards and operating procedures and participate in continuous improvement. Required qualifications: * High School diploma * Ability to lift and carry 50 lbs. * Prior experience with manufacturing food products, troubleshooting and repairing manufacturing equipment, or working in cGMP environment is a plus Skills to be successful in the role: * Strong attention to detail/safety with a high level of accuracy, organizational, and time management skills * Ability to trust and follow through on commitments with team members * Drive to understand the root cause of issues, and develop and enhance processes * Willingness to adapt to different approaches, ideas, tools, techniques, and processes Amway does not provide immigration-related sponsorship for this role. Do not apply for this role if you will need Amway immigration sponsorship (e.g., H-1B, STEM OPT, TN, etc.) now or in the future. Apply now Information at a Glance Helping People Live Better Lives Amway is based in Ada, Michigan, U.S.A., with global headquarters still located on the same property where the company was founded. Family-owned and guided by enduring values, we continue to be shaped by our Founders Fundamentals. Since 1959, our heart has remained the same: helping people realize their potential. Today, that mission spans six continents and more than 100 countries and territories.

The primary result expected from the Quality Control Technician will be to assure product quality by preparing samples, conducting quality control inspection and testing of components, dispersions, and finished goods, determining adjustments for batches that do not conform to requirements, documenting inspections, and insuring calibration of testing equipment. Essential Duties & Responsibilities: * Perform testing of production batches, incoming raw materials, finished goods, and components to determine conformance to specifications. * Judge as "fit for release" production batches, incoming raw materials, finished goods, and components that are in conformance to all specifications and visually acceptable. * Determine and communicate batch adjustments for any batches that do not conform to requirements, utilizing batch history, adjustment guidelines, and consultation with the Senior QC Technician, Assistant Supervisor, or QC Manager. * Perform validation testing during filling to insure integrity of finished goods, including labeling, packaging, and fill weights. * Communicate current status of inspections to Senior Technicians, Assistant Supervisor, or QC Manager. * Communicate issues with work instructions and procedures to Senior Technicians, Assistant Supervisor, or QC Manager. * Document inspection results. Required Experience: * 1-3 years of production/manufacturing/quality control experience preferred but not required. * High school diploma or equivalent, Associate's or Bachelor's degree a plus * Some background in physical sciences and algebra * Ability to accurately read and enter computer data through a variety of tests * Proficiency in Excel, Word, and other MS Office applications * Experience in SAP recommended but not required Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.

About this opportunity : As a Manufacturing Technician II, you'll be responsible for the implementation of assigned production operations working within defined production schedules in a cGMP environment.This is a 2nd shift position and comes with a 15% shift differential. Key Responsibilities: Maintain a clean and organized work environment. Responsible for following GMP and safety cultures, procedures, and regulations. Identify and submit safety hazards and incidents. Complete GMP documentation in a compliant manner. May review less complex documentation like logbooks. May revise procedures under direct supervision. May participate in investigations. May execute CAPA tasks. Identify and implement small continuous improvement projects. Responsible for assigned production activity and ensuring training is compliant prior to performing operations. Problem solving: basic understanding of process and documentation. Ability to identify abnormal results and report to higher position. Proficient in the assigned area of the process. Required Skills/Abilities: Minimum education requirements: high school diploma or equivalent with college level Chemistry degree or equivalent work experience. A biotechnology certificate or college degree is preferred. Must have knowledge of basic laboratory instrumentation such as use of pH meter, UV instrumentation, and solution delivery systems (process skids). Two plus years of experience in cGMP manufacturing environment. Performance/other experience can be considered pending manager discretion. The annualized salary range for this roles is $61,700.00 - $75,600.00.

Quality Technician I Wage: $23.65 + $2.00 shift differential shift: 2nd Shift- 2:30pm-11:00 pm From a small family business to a multi-billion dollar global company, Sonoco has been changing the face of products and packaging since 1899 - all while keeping the heart of “People Build Businesses” alive. Our talented people are at the core of our growth, constantly reinventing the Sonoco wheel with brilliant solutions every year. Today we are a world leader in global packaging solutions with diversified operations in over 34 countries. We're extremely proud of our portfolio of brands, our achievements in sustainability and industrialization and the groundbreaking work accomplished by our people. While reporting to the Quality Manager as a Quality Technician you will be require to use problem-solving techniques in routine job activities and team settings, performs all responsibilities in a manner, which ensures the quality expectations of every customer, both internal and external, are met or exceeded. Measures critical product/process variables, records or reports using appropriate tools and utilizes information to continuously improve. If unable to maintain processes within established limits or meet specifications, is fully authorized to stop the operation and seek assistance. What you will be doing: · Conduct required off-line testing for products. ·Ensure all customer feedbacks are completed on-time, root cause is identified and implemented. ·Assist in analyzing all customer feedbacks for trends and continuous improvement. · Involved in corrective action and preventive action process. ·Assist in process capability studies as deemed necessary. ·Assist and/or train plant personnel in GIQ quality system. · Assist in maintaining customer property. ·Assist in maintaining process for document control. ·Document COA's, COC's as required. ·Participates on customer visits. ·Defines quality concepts and quality processes, including statistical basics, etc.; applies quality tools; interprets information and data; applies team concepts. ·Where applicable, support the food safety team to organize its work, ensure relevant training and education of the food safety team members, ensure the food safety management system is established, implemented, maintained and updated, and report to the organization's top management on the effectiveness and suitability of the food safety management system We'd like to hear from you if: · Ability to push, pull, lift and/or carry up to 50 pounds on a frequent basis and up to 75 pounds on an occasional basis. · Ability to frequently bend, stand, stoop and grasp. · Ability to manipulate small parts on a consistent basis. ·Must know which measurement and test equipment (M&TE) tools are appropriate for various tasks and how to assess tool accuracy and precision; understands the concept of standards traceability for M&TE. ·Understands and applies basic inspection and testing techniques, including various types of sampling plans. ·Understands and applies various quality audit types and their components, tools, and techniques. ·Must be able to control nonconforming material. ·Performs miscellaneous job-related duties as assigned. At Sonoco Products Company, we offer a comprehensive total rewards package, including competitive pay and benefits. *Benefits listed below are for employees located in the U.S. Specific benefits and wellbeing programs may vary depending on your location (within the U.S. or global), or if you are a union employee. Benefits Medical, dental, and vision coverage for you and your dependents, including FSA and HSA options 401(k) retirement plan with company match Wellbeing tools and resources to support holistic health, including an Employee Assistance Program with a variety of services Paid time off and holidays to recreate, rejuvenate and care for the health of yourself and family Variety of company paid and voluntary employee-paid insurance plans including life, personal accident, and disability insurance Tuition reimbursement We are an equal opportunity employer, and we strictly prohibit and do not tolerate discrimination against employees, applicants or any other covered persons because of race, color, religion, national origin or ancestry, sex, pregnancy, sexual orientation, marital status, gender identity or expression, age, disability, genetic information, veteran status, or any legally protected characteristic.

At Spindrift, we're making every beverage a positive force of nature. Founded in 2010, we believe the best flavors come directly from nature. That's why every Spindrift beverage is made the hard way-with real squeezed fruit, never from concentrate. From sourcing the best-tasting fruit globally to maintaining a carefully honed manufacturing process, we believe in doing things the hard way, the intentional way, the better albeit more challenging way, the right way - because, in the end, it's worth it. Spindrift sparkling water is available nationwide, and Spindrift Spiked and Spindrift SODA is available in select markets. We are also a proud member of 1% for the planet, donating to environmental causes. Spindrift is headquartered in Newton, MA. The Quality Technician Role The Quality Technician will be responsible for supporting the Spindrift quality program across Spindrift's beverage portfolio, assist with maintenance of the retain library, assistance with recruiting and training internal sensory panelists, assist with collecting, synthesizing and archiving data as it relates to quality initiatives. Responsibilities include: Assisting the Sensory Analyst with managing the Spindrift sensory program by supporting new panelist onboarding and training, product retain tastings onsite, raw material evaluations, and standard production retains Assisting with managing the Product Retain Library to ensure it is neatly organized at all times, including maintaining an orderly process of receiving/processing product retains into the library upon arrival and the disposal/removal of out-of-date code samples Supporting the creation and organization of quality documentation (i.e. SOPs, protocols, training documents and more as needed) Collaborating with various teams within operations on the following activities: Finished product releases as needed, including review of finished micro reports and sensory evaluations Production holds as needed, including performing sensory evaluations on finished product and communicating results to relevant parties Assist with qualification of new suppliers, including performing required sensory evaluation of raw materials to determine acceptability for use Data entry and approval for specified raw materials into quality management system Assist with consumer complaint process, to include but not limited to: data entry, sample collection, investigation support Requirements Previous food safety experience, with experience in HACCP, GMP, USDA, or FDA preferred. Previous experience with SQF, ISO, GFCO, and/or FDA audits desirable Excellent verbal and written communication skills Thrives in an entrepreneurial environment and considers no task too small nor too large Consistently demonstrates accuracy, thoroughness and dependability Establishes and maintains effective channels of communications with internal and external contacts Adjusts tasks and focus in accordance with changing deadlines and priorities Available to travel up to 10% Able to work in the Newton, MA office Benefits Hourly rate for this part-time position is $22 - $25 / hour, 24-32 hours per week.

The Panther Group is looking to hire a Quality Inspector to support production at a leading manufacturer's Franklin, MA facility. The selected candidate will be responsible for the following duties: Self-starter able to work independently Responsible for supporting incoming, in-process, and final inspections - focus on machined and assembled mechanical components Verify product conformance to program specifications, drawings and acceptance tests Capture all inspection data and supplier data packages in ETQ and Deltek Knowledge of test and inspection methodology Able to properly utilize standard inspection tools; calipers, micrometers, height stands, etc Support of QMS, AS9100D and CMMI processes Supports assigned programs in accordance with detailed Quality Plans Assure inspection equipment used is calibrated Assist with cable & circuit board inspection as needed Required Qualifications: Minimum 3 Years experience Experience working on DOD electromechanical products Must be proficient in Microsoft Office applications Possess good technical communications and team building skills Must be able to interface with engineering, manufacturing, program office and configuration management Ability to problem solve and critically think Good trigonometry/geometry math skills Experience with Geometric Dimensioning and Tolerancing (GD&T) IAW ANSI/ASME Y14.5 Preferred Qualifications: Certified to or knowledgeable of IPC-A-610/620 requirements Recent experience working in an AS9100 environment Recent experience operating a CMM Pay Rate: Up to $35.00 per hour DOE #INDENG

Job DescriptionDescription: About Quantic Evans: Quantic Evans is a proud member of the Quantic™ Electronics Family.Quantic™ Electronics, an electronic component company, is a trusted partner in military, aerospace, industrial, and commercial markets with over a century of combined experience as a reliable problem-solver. Being part of Quantic's portfolio has allowed Quantic Evans to continue developing cutting-edge capacitor technology alongside other world-class technology companies representing mission-critical electronics' future. With sites in East Providence, RI, and Sanford, ME, Quantic Evans manufactures high-energy density capacitors for demanding mission-critical applications. We have the most power-dense capacitor technology in the industry. We are routinely specified for defense, aerospace, and energy exploration applications where high reliability and SWAP (space, weight, and power) savings are critical design considerations. Quality Screening Technician 1, East Providence, RI Reporting to the Customer Quality Manager, the Quality Screening technician will be responsible for testing and inspecting capacitors and capacitor banks made by Quantic Evans, ensuring they meet order specifications and quality standards. Expected Hours: Full time Monday to Friday 6:00 AM to 2:30 PM Responsibilities: Product Reliability Tester (45%): Perform long-term reliability testing on assemblies, including life, thermal exposure, vibration, voltage surge testing Perform continuous monitoring testing on assemblies including fine leak test and shock. Perform special screening of finished assemblies in accordance with customer requirements. Perform electrical and functional tests on capacitor assemblies and capacitor banks for capacitance, Equivalent Series Resistance (ESR), and Direct Current Leakage (DCL). Use testing equipment to diagnose issues and ensure product functionality. Document test procedures and results. Customer Quality Support (40%): Compile and provide data for Lot Acceptance Test (LAT) reporting by the Customer Quality Manager. Research shipped product history including production records, serial/lot numbers, and test records to support customer specific inquiries. Coordinate customer returns including logging, tagging and preparation of returned products for evaluation and analysis. Work with Customer Quality Manager and Engineering to identify defects/failure modes of products Provide input for problem solving reports and organize supporting materials. In-Process Inspector (15%): Monitor production processes and perform regular quality checks. Identify and address potential quality issues during manufacturing. Work closely with production teams to implement quality improvements. Additional duties as assigned Requirements: Criteria For Success Must be considered a U.S. Person eligible to work in the United States Requires 1 to 3 years of inspection experience in a manufacturing environment. High school diploma or Equivalent, Technical school preferred Ability to read and write in English Ability to communicate in English Knowledge and understanding of scientific/ engineering notation. Capability to set up and use test equipment and measuring tools such as calipers, micrometers, indicators, multimeters, megohmmeters, and precision impedance meters. Prior experience with ISO 9001 and / or AS9100 standards desired Must possess a collaborative team-oriented mindset and personality with a hands-on, can-do attitude. Excellent organizational skills and attention to detail. Microsoft Windows and Office suite (Excel, Word) Work Environment and Physical Demands: General office and manufacturing environment. Exposure to hazards associated with manufacturing equipment and tools. Visual acuity for reading measurements, assembly instructions, and monitoring equipment. Requires manual dexterity and the ability to manipulate small objects. Ability to lift, push, and pull up to 20 pounds Sitting, bending, pushing, and pulling motions Requires sitting for long periods Walking to various stations or areas of the production floor. Upper body range of motion Ability to discern alarms and respond to machinery sounds, and verbal instructions in a noisy environment. Will be required to wear appropriate PPE as outlined by company safety protocols. EEO/AA Quantic is an affirmative action/equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, work-related mental or physical disability, veteran status, sexual orientation, gender identity, or genetic information. We participate in E-Verify. U.S. EXPORT CONTROLS As a U.S. defense manufacturer, [Company Name] is required to safeguard U.S. defense-related and other export-controlled articles, technologies, and services from unauthorized access, export, or re-export. The transfer of U.S. export-controlled articles, technologies, or services (including manufacturing processes) to individuals or entities that do not qualify as “U.S. persons,” as defined by 22 CFR 120.62, is prohibited without prior authorization from the appropriate U.S. government agencies, such as the Department of State's Directorate of Defense Trade Controls (DDTC). Under 22 CFR 120.62, a “U.S. person” is defined as a lawful permanent resident as per 8 U.S.C. 1101(a)(20), or a protected individual under 8 U.S.C. 1324b(a)(3). It also includes any corporation, business association, partnership, society, trust, or other entity that is incorporated to do business in the United States, as well as governmental entities at the federal, state, or local levels. It does not include foreign persons as defined in § 120.63. To ensure compliance with U.S. export control regulations, candidates for this position are required to undergo an Export Compliance Assessment. As part of this process, candidates may be asked to provide documentation verifying their status as “U.S. persons” or “foreign persons,” in accordance with U.S. regulation, to determine whether prior authorization is required to perform specific job duties related to this position

The primary result expected from the Quality Control Technician will be to assure product quality by preparing samples, conducting quality control inspection and testing of components, dispersions, and finished goods, determining adjustments for batches that do not conform to requirements, documenting inspections, and insuring calibration of testing equipment. Essential Duties & Responsibilities: Perform testing of production batches, incoming raw materials, finished goods, and components to determine conformance to specifications. Judge as “fit for release” production batches, incoming raw materials, finished goods, and components that are in conformance to all specifications and visually acceptable. Determine and communicate batch adjustments for any batches that do not conform to requirements, utilizing batch history, adjustment guidelines, and consultation with the Senior QC Technician, Assistant Supervisor, or QC Manager. Perform validation testing during filling to insure integrity of finished goods, including labeling, packaging, and fill weights. Communicate current status of inspections to Senior Technicians, Assistant Supervisor, or QC Manager. Communicate issues with work instructions and procedures to Senior Technicians, Assistant Supervisor, or QC Manager. Document inspection results. Required Experience: 1-3 years of production/manufacturing/quality control experience preferred but not required. High school diploma or equivalent, Associate's or Bachelor's degree a plus Some background in physical sciences and algebra Ability to accurately read and enter computer data through a variety of tests Proficiency in Excel, Word, and other MS Office applications Experience in SAP recommended but not required Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.

So why join Hologic? You will have the opportunity to get in on the ground floor at a high growth facility to create a manufacturing process working on life-saving medical devices with potential for future growth. This is a great opportunity to enhance you manufacturing operation skills and knowledge to further your career. The Quality Control Inspector is a critical member of the Quality Assurance team, responsible for ensuring that finished products and in-process components meet all regulatory, quality, and customer requirements before release to inventory. This role involves the meticulous review of Device History Records (DHRs), performing inspections, and providing support to manufacturing and quality processes, such as Incoming Inspection, Material Review Board (MRB), Calibration and Returned Material Authorization (RMA) activities. The Final Inspector 2 is instrumental in upholding Hologic's commitment to excellence by ensuring compliance with Good Manufacturing Practices (GMP), ISO standards, and quality systems, while fostering a culture of continuous improvement and collaboration. What to expect: Lead with Ownership - Demonstrate integrity and always aim to do the right thing. Be highly accountable for your work, follow through on commitments, and take responsibility when things don't go as planned. Embrace opportunities to try new things and learn from mistakes. Act with Speed - Approach tasks with a strong sense of urgency and a bias toward action. Keep stakeholders informed by providing regular updates early and often, ensuring transparency and avoiding unexpected surprises, even when working at a fast pace. Foster Partnerships - Collaborate effectively with teammates and stakeholders to achieve shared goals. Invest in building strong working relationships and contribute to efforts that fulfill the organization's Purpose, Promise, and Passion. Delight Customers - Strive to exceed expectations by delivering high-quality work, exceptional experiences, and innovative solutions. Engage in proactive communication, provide excellent service, and develop a deep understanding of customer needs to create positive, lasting impressions and build trust-based relationships. Celebrate WINS! - Take pride in delivering impactful results. Contribute to a positive team environment by celebrating both individual and team accomplishments. Support colleagues, recognize collective successes, and embody the mindset of an 'A-player' who inspires others. What we expect: Perform detailed reviews of Device History Records (DHRs) as part of final inspection and release activities for finished products, ensuring accuracy and compliance with documentation standards. Conduct reviews of manufacturing records for replacement components, subassemblies, and in-process inspections to ensure alignment with quality requirements. Support manufacturing personnel by ensuring proper documentation of Failure Investigation Reports and processing of Non-Conforming Materials in the Product Lifecycle Management (PLM) system, including identification, quarantine, and documentation. Perform routine inspections, including field service and special inspections, to support validations, studies, and incoming inspection activities. Communicate and reinforce Good Manufacturing Practices (GMP) to manufacturing personnel to uphold quality standards. Review and provide input on new releases of Inspection and Test documents to ensure adherence to Good Documentation Practices (GDP). Maintain QA Activity Collection Plans, First Pass Yield reports, and other applicable tracking mechanisms to monitor quality metrics. Collaborate with Engineering to provide feedback on documentation improvements and process changes. Support Incoming, product returns and calibration teams as needed as needed. Perform other duties as assigned by leadership to meet organizational and operational needs. Education and Experience: High school degree and/or an equivalent technical school education preferred. Minimum of 3 to 5 years related Quality Inspection experience in Medical Manufacturing environment. Experience with Oracle, and Agile preferred. The annualized base salary range for this hourly role is $46,100-$69,000 and is bonus eligible. Final compensation packages will ultimately depend on factors including relevant experience, skillset, knowledge, geography, education, business needs and market demand. Agency and Third Party Recruiter Notice: Agencies that submit a resume to Hologic must have a current executed Hologic Agency Agreement executed by a member of the Human Resource Department. In addition Agencies may only submit candidates to positions for which they have been invited to do so by a Hologic Recruiter. All resumes must be sent to the Hologic Recruiter under these terms or they will not be considered. Hologic, Inc. is proud to be an Equal Opportunity Employer inclusive of disability and veterans.

The primary result expected from the Quality Control Technician will be to assure product quality by preparing samples, conducting quality control inspection and testing of components, dispersions, and finished goods, determining adjustments for batches that do not conform to requirements, documenting inspections, and insuring calibration of testing equipment. Essential Duties & Responsibilities: Perform testing of production batches, incoming raw materials, finished goods, and components to determine conformance to specifications. Judge as “fit for release” production batches, incoming raw materials, finished goods, and components that are in conformance to all specifications and visually acceptable. Determine and communicate batch adjustments for any batches that do not conform to requirements, utilizing batch history, adjustment guidelines, and consultation with the Senior QC Technician, Assistant Supervisor, or QC Manager. Perform validation testing during filling to insure integrity of finished goods, including labeling, packaging, and fill weights. Communicate current status of inspections to Senior Technicians, Assistant Supervisor, or QC Manager. Communicate issues with work instructions and procedures to Senior Technicians, Assistant Supervisor, or QC Manager. Document inspection results. Required Experience: 1-3 years of production/manufacturing/quality control experience preferred but not required. High school diploma or equivalent, Associate's or Bachelor's degree a plus Some background in physical sciences and algebra Ability to accurately read and enter computer data through a variety of tests Proficiency in Excel, Word, and other MS Office applications Experience in SAP recommended but not required Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.

Requirements Be responsible for driving and maintaining your company vehicle which you will take home with you for use during work hours Ability to communicate professionally and clearly with manager and co-workers via phone, text, email, and in-person Mechanically inclined Must have a valid driver's license with a clean driving record and be able to pass pre-employment screenings Ability to lift up to 60 pounds without assistance; up to 150 pounds with assistance Ability to sit or stand for at least 30 minutes Ability to twist and bend at the waist repeatedly Draft Line Quality Technician Benefits: (Part time positions may not include all benefits listed) Competitive Salary Commissions paid for leads generated in the field Medical/Dental/Prescription/Vision plans Paid Time Off 9 paid holidays 401(k) with generous employer match Annual boot reimbursement Employer paid benefits such as life, short-term and long-term disability insurance plans Flexible Spending Accounts (Medical, Dependent care, and Commuter) We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Salary Description $18.00 - $20.00 per hour

Bringing our love of food to families for five generations! Blount Fine Foods is a family-owned and operated manufacturer, marketer, and developer of premium fresh prepared foods. We are an engaging team, bringing restaurant-quality products to America including single-serve grab-n-go fresh soups, mac & cheese, and entrées in grocery stores across the country, as well as for hot bars and restaurants. Help us create the finest food experiences including those with specialty certifications that include organic, gluten-free, and low sodium, among others. Join a proven team for growth, success, and a satisfying career!330pm - 12amEssential Duties and Responsibilities include the following. Other responsibilities w/similar skill and work conditions as assigned.· Conduct quality audits and influence the proper execution of culinary and cook methods so that product will meet desired quality levels. If necessary, use your culinary knowledge and good judgement to adjust inline to get product within specification.· Aids and Supports facility teams on investigating, analyzing, containing, and correcting quality issues related to customer complaints.· Serve as a resource/ coach for established quality standards and procedures, culinary training and technical support to reduce variability in each process.· Be present and integrated into production activities on the process floor.· Provide follow up monitoring, documenting and feedback of completed initiative controls.· Assure all organoleptic qualities and process standards are appropriate and consistently met.· Monitor and carry-out various batch control tests and product sampling to ensure process is in control.· Maintain, create, and communicate quality control reporting data.· Candidate must be able to interact in a dynamic team environment while displaying tact and diplomacy with peers and management alike in order to achieve goals.· Candidate must be reliable and flexible in order to meet seasonality demands of the business.· Passion for food, team player, influencer, good communicator and has high quality standards.Responsibilities for Food Safety Responsible for completing required paperwork accurately and honestly, where applicable.§ Responsible for completing required paperwork accurately and honestly as applicable.§ Must adhere to all corporate GMPs (Good Manufacturing Practices), established SOPs (Standard Operating Procedures) and all Food and Employee Safety policies.§ Must adhere to all Allergen control programs and procedures as applicable.§ Responsible for reporting suspicious packages, activities and individuals.§ If monitoring CCPs (Critical Control Points), must be trained in HACCP (Hazard Analysis Critical Control Point) and adhere to approved HACCP plan(s).Education and/or Experience· Associate degree (A. S.) from college or university. Culinary and process acumen. Culinary experience in a manufacturing environment preferred. Bachelor's Degree in a related discipline of Food Science, Statisticsor a Culinary field and 2+ years manufacturing experience preferably in a food environment, or equivalent combination of education and work experience.· Quality certification/training/experience preferred.Competencies: “An area of expertise that is fundamental to a particular job or function”In order to perform this position properly, each candidate must demonstrate the following core competencies (not all inclusive).§ Business Knowledgeo Effectively utilizes available tools to maximize contributiono Manages Resources effectivelyo Understands relationships of resources, process, and profito Ability to project future state, and the ability to prepare and deliver one's division to its optimum performance§ Interpersonal Skillso Builds relationships at all levelso Manages conflict effectivelyo Practices early intervention; resolves issues earlyo Communicates effectively; has a point of viewo Inspires trust and Teamworko Is a Motivator§ Judgmento Analyzes problems effectivelyo Demonstrates sound and ethical decision-making, even under pressureo Patient; challenges appropriatelyo Open to ideas of otherso Consistent§ Leadershipo Persuasive in getting others to consider his/her or companies point of viewo Inspires trust; viewpoint actively sought by otherso Fosters collaborationo Overcomes objections with logic and effective communication skillso Able to deliver message of “Culture change”; in a positive, constructive and effective mannero Is a Leader, and is viewed as one Language Skills· Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

At Spectrum Control, most departments operate on a 4-day, 10-hour work schedule in exchange for a 3-day weekend. We offer competitive wages and PTO, plus our benefits begin on day 1 of employment. Come join a workforce where we put you first! JOB SUMMARY: The Quality Technician inspects and tests materials and equipment to ensure compliance with specified drawings and procedures. ESSENTIAL JOB FUNCTIONS: Verify and inspect materials to match PO and MRP requirements in accordance with specification drawings, military standards, commercial standards, sampling plans and internal procedures as required. Perform screening of materials as specified on incoming inspection travelers and/or shop travelers. Perform first piece inspection actions and completion of AS 9102 forms required under AS9100 where applicable. Inspect devices under high-powered microscopes for verification of compliance or defect identification and initiate and submit deficiency forms on any non-compliant materials as outlined by company MRB procedures. Perform functional electrical measurements using LCR meters, multimeters and other test equipment. Program, set-up and operate the coordinate measuring machine (CMM) and perform basic maintenance and calibration on the CMM where necessary. Inspect detailed machined parts and assemblies per print requirements if in a machine shop setting. Conduct first article, first piece, in process and final inspection. Ensure compliance using mechanical measuring devices including, but not limited to: calipers, dial gauges and optical comparators and facilitate testing to ensure compliance. Maintain and organize quality documentation. Maintain critical task training and certification records. Perform quality and process improvement audits and assist manufacturing inspectors with internal and external inspections as directed. Perform other inspection, testing or quality related tasks as needed. QUALIFICATIONS: Education: High School or Equivalent Experience Years: 1-3 years Experience Type: Production, Quality Related Field OR Equivalent combination of education and experience Microsoft Office and web proficiency Able to read and interpret blueprints, operating and maintenance instructions, ISO 9000 and 9001 company procedure manuals, specifications and geometric tolerancing and bar graphs Ability to do basic math in all units of measure using whole numbers, common fractions and decimals Ability to use SolidWorks software where applicable Understanding of LAN and information systems IPC-A-610 and J-STD-001, IPC 600/3012 certification in certain areas WORK ENVIRONMENT: Manufacturing Floor Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) Third-Party Recruiters Please note, that per Spectrum Control Policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters are engaged to provide candidates for a specified opening and in alignment with our values and expectations. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Spectrum Control will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. If you or your agency are interested in becoming an approved vendor please contact ************************************.

Since 2009, Info Way Solutions has earned a reputation as a full-service staffing firm that excels in a fast-paced marketplace. We have placed highly skilled professionals on a temporary, temporary-to-hire and direct-hire basis in the fields of accounting and finance, IT technology,office administration, marketing and design. Info Way Solutions is dedicated to providing you quality professionals with well-matched skills to your unique hiring requirements and workplace environment. We collaborate with customers to consistently and cost-effectively plan, execute and deliver high-quality services and results.Our consultants are seasoned professionals who build long-term,trusted relationships that bring about a high level of energy, integrity, experience and value to our client's work. Our superior client-consultant relationships and in-depth insight of services have resulted in significant repeated business with clients. In addition, we are partners with best-in-class technology vendors that enable us to best determine the most appropriate hardware, software and services to cater to any of our client's business needs. We have often collaborated with them to make optimal use of today's technology while also planning for the future. More than 50 customers - including mid-market leaders and many of the Fortune 500 Companies - rely on our expertise to leverage their investments. Job Description Responsible for cleaning\decontamination of returned product samples. After processing of samples, responsible for shipping samples to appropriate manufacturing location. Must be able to handle lifting of boxes on a daily basis. Will be responsible for lifting Biohazards shipping boxes with assistance from a second person to be placed on a designated cart; these boxes can weigh upwards of 55 pounds. Analyze samples using specific procedures and instrumentation. Maintain documentation. May provide assistance in troubleshooting results outside of predefined specifications. SUMMARY OF POSITION: The candidate will support the Post Market Vigilance Investigations team's activities for the Patient Monitoring and Recovery (PMR) Division. These activities include; assist in managing the receipt of incoming physical complaint product, conducting follow ups with accounts and/or International Subsidiaries to rectify discrepancies with product receipt, assisting in managing the process flow of complaint investigations, performing Device History Record Reviews, and performing root cause analysis on PMR Product customer returns to ensure high levels of quality, reliability, safety, and efficacy. Additional responsibilities include management of clinically applied medical device retains and associated paper records in accordance with Covidien Medtronic Record Retention Policies and support staffing needs. ESSENTIAL FUNCTIONS: • Assist PMV Investigations Coordinator with managing receipt of physical complaint product samples, in addition to corresponding with domestic and international accounts to rectify discrepancies in product receipt. • Assist in the coordination of sanitization of clinically applied medical device returns and shipment to respective Medtronic Manufacturing facilities, as well as coordinating the investigation process with internal Engineering and Quality groups. • Test and thoroughly evaluate clinically applied surgical medical devices of various degrees of complexity to determine root cause analysis within a closely monitored time frame. • Identifying the appropriate test method/regiment from existing Standard Operating Procedures for complaint sample evaluation, execute the method, and interpret the data (technical) for definitive root cause analysis determination. Test methods may include dimensional and/or tensile testing and interpretation of the technical data yielded in accordance with USP/EP/ASTM standards. • Replicate reported failure mode with bench top or in vivo test methods and document observations accordingly. • Initiate and distribute Corrective Action Requests to Manufacturing or Engineering Departments as needed. • Prepare technical investigation reports based on results of evaluation and/or review of the manufacturing plant reports to be documented in the QA (Quality Assurance) Department complaint database and incorporated into customer response letters. • Certification with OSHA's BloodBorne Pathogens Standard 29 CFR 1910.1030 and adherence to Corporate and Local Environmental Health and Safety Policies. MINIMUM REQUIREMENTS: Minimum Experience: 2 to 3 yrs • Academic or work experience in a laboratory or manufacturing environment. Experience with laboratory equipment or test equipment or manufacturing equipment highly desirable. • Experience with medical devices preferred but not required. Skills/Qualifications: • Must be proficient with MS Office (with emphasis on Excel and Word). • Critical independent thinking and timely follow up. • Time management skills. • Excellent written and verbal skills necessary. QD003425-001, Rev A ORGANIZATIONAL RELATIONSHIPS/SCOPE: • Quality Assurance • Manufacturing • Engineering • Research and Development • Regulatory Affairs • Legal • Marketing/Sales WORKING CONDITIONS: Biohazardous laboratory environment requiring use of personal protective equipment in accordance with CDC and OSHA regulations. Responsible for cleaning\decontamination of returned product samples. After processing of samples, responsible for shipping samples to appropriate manufacturing location. Must be able to handle lifting of boxes on a daily basis, some boxes weigh upwards of 50 pounds each. Must be able to handle lifting of boxes on a daily basis. Will be responsible for lifting Biohazards shipping boxes with assistance from a second person to be placed on a designated cart; these boxes can weigh upwards of 55 pounds. Analyze samples using specific procedures and instrumentation. Maintain documentation. May provide assistance in troubleshooting results outside of predefined specifications. Qualifications Education: BS Degree in a Science or Engineering discipline.

Job Title: QA Inspector - Receiving (Contract) Job Type: Full-time Busek Co. Inc. (************** researches, develops, and produces spacecraft subsystem technologies for space missions. Our talented staff possess expertise in in-space propulsion, space-borne sensors, materials science, manufacturing, and high-fidelity electronic design for challenging space missions. Busek is recognized in the spacecraft on-orbit propulsion community for numerous achievements, including developing the first U.S. Hall Effect Thruster in space. Our efforts span research, development, and manufacturing of aerospace systems, with low-volume production of high-reliability in-space components and subsystems. Our facilities include over 30,000 sq. ft. of R&D labs and more than 40 vacuum chambers. Founded in 1985, Busek is located in Natick, MA, approximately 20 miles west of Boston. For more information, visit ************** Job Summary: As a Quality Assurance (QA) Inspector - Receiving, you will play a critical role in ensuring the quality of incoming and in-process parts and components. You will work closely with design and test engineers, manufacturing staff, and fabrication technicians (both internal and external) to verify compliance with Busek's documentation and customer requirements. This role provides a direct contribution to spaceflight programs, including groundbreaking NASA, commercial space, and defense missions. Key Responsibilities: Conduct inspections of incoming and in-process components per documentation requirements. Interpret engineering blueprints, specifications, and drawings. Operate and utilize various inspection tools and gauges to verify part quality. Maintain accurate inspection records and documentation. Adhere to GD&T (Geometric Dimensioning and Tolerancing) principles and processes. Coordinate inspection efforts with coworkers to ensure workflow efficiency and quality compliance. Desired Qualifications: Prior experience in a technical QA parts inspection role. Previous work experience in quality control or related field. Proficiency in Microsoft Office Suite (Word, Excel). Knowledge of AS9100 or ISO 9001 standards is a plus. Experience working with small precision components. Additional Information: To conform to U.S. Government regulations, applicants must be a U.S. citizen, lawful permanent resident of the U.S., or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Benefits: Competitive Salary SEP Retirement Savings Performance Bonuses Medical, Dental, and Vision Insurance Life Insurance Long-Term / Short-Term Disability Coverage Paid Vacation, Sick Leave, and Holidays Education Assistance To comply with U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), employment at Busek requires that applicants be one of the following: A U.S. citizen A lawful U.S. permanent resident (i.e., current Green Card holder) A refugee or an individual granted asylum in the U.S. Or be eligible to receive the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable For more information about ITAR regulations, visit this resource. Article - DDTC Public Portal

At Spindrift, we're making every beverage a positive force of nature. Founded in 2010, we believe the best flavors come directly from nature. That's why every Spindrift beverage is made the hard way-with real squeezed fruit, never from concentrate. From sourcing the best-tasting fruit globally to maintaining a carefully honed manufacturing process, we believe in doing things the hard way, the intentional way, the better albeit more challenging way, the right way - because, in the end, it's worth it. Spindrift sparkling water is available nationwide, and Spindrift Spiked and Spindrift SODA is available in select markets. We are also a proud member of 1% for the planet, donating to environmental causes. Spindrift is headquartered in Newton, MA. The Quality Technician Role The Quality Technician will be responsible for supporting the Spindrift quality program across Spindrift's beverage portfolio, assist with maintenance of the retain library, assistance with recruiting and training internal sensory panelists, assist with collecting, synthesizing and archiving data as it relates to quality initiatives. Responsibilities include: * Assisting the Sensory Analyst with managing the Spindrift sensory program by supporting new panelist onboarding and training, product retain tastings onsite, raw material evaluations, and standard production retains * Assisting with managing the Product Retain Library to ensure it is neatly organized at all times, including maintaining an orderly process of receiving/processing product retains into the library upon arrival and the disposal/removal of out-of-date code samples * Supporting the creation and organization of quality documentation (i.e. SOPs, protocols, training documents and more as needed) * Collaborating with various teams within operations on the following activities: * Finished product releases as needed, including review of finished micro reports and sensory evaluations * Production holds as needed, including performing sensory evaluations on finished product and communicating results to relevant parties * Assist with qualification of new suppliers, including performing required sensory evaluation of raw materials to determine acceptability for use * Data entry and approval for specified raw materials into quality management system * Assist with consumer complaint process, to include but not limited to: data entry, sample collection, investigation support

Job DescriptionDescription: About Quantic Evans: Quantic Evans is a proud member of the Quantic™ Electronics Family Quantic Electronics, an electronic component company, is a trusted partner in the military, aerospace, industrial, and commercial markets, boasting over a century of combined experience as a reliable problem solver. Being part of Quantic's portfolio has allowed Quantic Evans to continue developing cutting-edge capacitor technology alongside other world-class technology companies representing mission-critical electronics. With sites in East Providence, RI, and Sanford, ME, Quantic Evans manufactures high-energy-density capacitors for demanding, mission-critical applications. We have the most power-dense capacitor technology in the industry. We are routinely specified for defense, aerospace, and energy exploration applications where high reliability and SWaP (space, weight, and power) savings are critical design considerations. Quality Technician, East Providence, RI Reporting to the Quality Manager, the Quality Technician will be responsible for inspecting Quantic Evans-manufactured capacitors and capacitor banks. Ensures that products meet order specifications and established quality and control requirements. Maintains records of inspection progress and problems. Recommends and implements corrective measures under general supervision under the Quality Manager. Generally, requires between 5+ years of inspection experience in a manufacturing environment, as well as familiarity with good manufacturing and documentation practices under ISO 9001 and AS 9100 regulatory standards. Performs routine electrical testing of capacitors, components, instruments, and other mechanical assemblies. Monitors test activities and records test results; may be involved in setting up and maintaining test equipment. Responsible for the inspection of all stages of the manufacturing process. Ensures that processes, tools, products, and materials meet established quality standards and requirements. Expected Hours: Full-time Monday to Friday, 6:00 AM - 2:30 PM Responsibilities: Interfacing with Engineering /Production (30%) Identify tasks and prioritize them based on workload as required by production needs Communicates priorities to Jr. inspectors Communicate effectively with Engineering about issues and trends Quality Inspector (30%): Inspect products and components to ensure compliance with internal quality standards and regulations. Use common inspection tools and equipment (digital calipers, gages, micrometers) to measure product features. Record inspection results and report any non-conformities. Train Jr. inspectors according to established practices In-process Inspector (20%): Monitor production processes and perform regular quality checks. Identify and address potential quality issues during the manufacturing process. Work closely with production teams to implement quality improvements Electronic Tester (10%): Perform electrical and functional tests on capacitor assemblies and capacitor banks for capacitance, Equivalent Series Resistance (ESR), and Direct Current Leakage (DCL). Utilize testing equipment to identify and resolve issues, ensuring product functionality. Document test procedures and results. Metrology and Calibration (10%): Maintain and calibrate precision measuring instruments. Perform routine checks to ensure measurement accuracy and precision. Document calibration and maintenance activities. Additional duties as required Requirements: Criteria For Success Must be considered a U.S. Person eligible to work in the United States High school diploma, trade school, and/or associate degree in a related or technical field. Typically requires 3 to 5 years of inspection experience in a manufacturing environment. General knowledge of inspection processes and procedures. Familiarity with using a microscope and other quality tools like micrometers and calipers.? General time management, communications, decision-making, and organization skills. Ability to use PCs and various software applications such as Microsoft Windows and the Office suite (Excel, Word) Possess a collaborative team-oriented mindset and personality with a hands-on can-do attitude. General knowledge of manufacturing procedures preferred. Ability to keep workspace clean and adhere to all safety rules and company policies. Capability to work in a fast-paced environment to meet deadlines and quotas Must demonstrate consistent and reliable attendance. Work Environment and Physical Demands: General office and manufacturing environment. Exposure to hazards associated with manufacturing equipment and tools. This position requires working near electrical and mechanical equipment that could potentially interfere with pacemaker function. Ability to read and write in English Ability to lift, push, and pull up to 30 pounds Prolonged sitting during a shift Sitting, bending, stooping, pushing, and pulling motions Ability to handle small tools, parts, and machinery with precision. Visual acuity for reading measurements, assembly instructions, and monitoring equipment. Will be required to wear appropriate PPE as outlined by company safety protocols. EEO/AA Quantic is an affirmative action/equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, work-related mental or physical disability, veteran status, sexual orientation, gender identity, or genetic information. We participate in E-Verify. EEO Poster in English EEO Poster in Spanish U.S. EXPORT CONTROLS As a U.S. defense manufacturer, Quantic Evans is required to safeguard U.S. defense-related and other export-controlled articles, technologies, and services from unauthorized access, export, or re-export. The transfer of U.S. export-controlled articles, technologies, or services (including manufacturing processes) to individuals or entities that do not qualify as “U.S. persons,” as defined by 22 CFR 120.62, is prohibited without prior authorization from the appropriate U.S. government agencies, such as the Department of State's Directorate of Defense Trade Controls (DDTC). Under 22 CFR 120.62, a “U.S. person” is defined as a lawful permanent resident as per 8 U.S.C. 1101(a)(20), or a protected individual under 8 U.S.C. 1324b(a)(3). It also includes any corporation, business association, partnership, society, trust, or other entity that is incorporated to do business in the United States, as well as governmental entities at the federal, state, or local levels. It does not include foreign persons as defined in § 120.63. To ensure compliance with U.S. export control regulations, candidates for this position are required to undergo an Export Compliance Assessment. As part of this process, candidates may be asked to provide documentation verifying their status as “U.S. persons” or “foreign persons,” in accordance with U.S. regulation, to determine whether prior authorization is required to perform specific job duties related to this position