Quality technician jobs in Fremont, CA

Red Oak Technologies is a leading provider of comprehensive resourcing solutions across a variety of industries and sectors including IT, Marketing, Finance, Business Operations, Manufacturing and Engineering. Our client is an electronics manufacturer. They are looking for a Manufacturing Technician (Swing Shift) to join their team. This role is a CONTRACT position. Position will be ONSITE. Candidate must be able to commute onsite to San Francisco, CA. **Swing Shift - 2:00PM - 10:30PM - Monday through Friday - Some work on Saturday as needed** **Gated private parking lot available for contractors** **$30/hr - $35/hr** Position Requirements: Follow all Safety and Laser Safety procedures and requirements Be able to construct, test and calibrate engineering and production robotic and computer-controlled assembly systems using engineering prints, schematics, assembly instructions and engineering direction Knowledgeable in high precision measuring equipment, calibration, and detailed record generation Experienced and Proficient in the following: Mechanical hand and power tools Oscilloscopes, DMM, Signal Generators, Optics, Cameras Laser safety, lasers, laser pattern recognition, beam focus, and active alignment Auto dispense and cure of UV adhesive Multiple axis, vision assisted, computer controlled robotic assembly equipment in both a R/D and Volume Manufacturing environment Identification of “Root” Cause of Manufacturing, Quality and Yield issues Microsoft Office, Standard SPC and Flowcharts packages Pneumatic actuated Slides, Grippers, etc. Hex Pod Tables, Active Alignment Excellent reading, writing, and communication skills in English Minimum of 5 years industry experience, Lidar Sensor experience preferred but not required Be able to stand for long periods of time Lift and carry 35 lbs Red Oak Technologies is made up of people from a wide variety of backgrounds and lifestyles. We embrace diversity and invite applications from people of all walks of life. See what it's like to be at the top; connect with one of our recruiters and apply today. Red Oak Tech: Quality | Talent | Integrity Note: Compensation rates are based on years of experience and/or level of skills relevant to the opportunity.

TITLE: PLATING PROCESS TECHNICIAN FLSA STATUS: NON-EXEMPT A SHIFT: MONDAY THRU WEDNESDAY AND EVERY OTHER THURSDAY 6:00 AM TO 6:00 PM REPORTS TO: DIRECTOR, PLATING PROCESS ENGINEERING Under the direction of the Director of Plating Process Engineering, the Plating Process Technician provides support to the engineering teams in the plating area, including assisting with wet etch process, preparing and maintaining recipes, reviewing and documenting process or procedures, and expediting and dispositioning prototype wafers; maintains process controls using Statistical Process Control (SPC), collects and analyzes data, and recommends corrective action. This position is located in Milpitas, California. ESSENTIAL FUNCTIONS: Provides support to the engineering teams in the plating, wet etch, and stripping process areas Supports the plating, wet etch, and stripping processes by preparing, maintaining, and setting up recipes to ensure an efficient and consistent process Reviews and documents processes and procedures; partners with engineering to implement changes effectively Expedites and dispositions prototype wafers in the plating, wet etch and stripping areas Assists engineers to run plating process development experiments, collects and analyzes data, and recommends corrective action if required Reviews and maintains process controls using SPC and prepares charts and graphs Assists with routine trouble-shooting and resolves basic process-related issues Participates in and recommends modifications to procedures or processes in support of continuous improvement initiatives Collaborates with Engineering to qualify or approve new processes or procedures Creates reports, charts, or graphs on an ad-hoc or routine basis Prepares daily pass down report for engineers, next shift plating process technicians, and manufacturing plating technicians Responds to inquiries from other team members, managers, or departments Adheres to all safety policies and procedures as required Performs other duties of a similar nature or level* MINIMUM QUALIFICATIONS: Associates degree in Electronics or Industrial Technology and/or equivalent relevant experience Two years of experience working in the semiconductor industry Knowledge of plating, wet processes and procedures Hands on experience using metrology tools such as pH meter, Tencor Thickness Profiler, XRF, and B-H loop tools Proficient in the use of Microsoft Office Applications Required Knowledge, Skills, and Abilities: Knowledge of semiconductor or hard disk drive (HDD) principles and processes Knowledge and ability to use SPC to maintain process controls Knowledge of plating, wet processes and procedures Ability to collect and analyze data, present findings, and recommend corrective action Ability to adhere to all safety policies and procedures Ability to communicate effectively with all levels of employees and management Demonstrated ability to follow routine verbal or written instructions Demonstrated problem solving and organizational skills Demonstrated time management and prioritization skills Skilled at resolving issues quickly and efficiently Flexible and able to prioritize The hourly rate for this full-time position is between $25.00-$40.00 + bonus target + benefits. Within the range the individual pay may differ depending on additional factors including job responsibilities, job related knowledge, skills, abilities, education, and experience. The hourly pay range shown is subject to change and may be modified periodically. WORKING CONDITIONS: The Plating Process Technician works primarily in an indoor environment on A shift which is Monday thru Wednesday and every other Thursday 6:00 AM to 6:00 PM. The schedule may be altered from time-to-time to meet business or operational needs; may travel from building-to-building as needed. Works in a class 100 ESD sensitive wafer manufacturing facility; wears a cleanroom (bunny) suit, including hood, gloves, safety glasses, booties, and mask. May be exposed to hazardous conditions, chemicals, fumes, and/or gases during the course of work day; Stands and walks; performs various fine grasping movements, bends, and twists; operates a computer and enters information using a keyboard, operates a telephone, and other office equipment. Must be able to load and unload various wet etch chemical solutions several times per shift. May be required to push, pull, or lift up to 25 pounds. *Other duties of a similar nature or level are duties that may be required, but may not be specifically listed in the job description or posting. TDK/Headway Technologies, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. Applicants requiring accommodation in order to complete the application process should contact the Headway Human Resources Department.

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Teledyne Energetics is comprised of Teledyne Electronic Safety Products (TESP) and Teledyne RISI Inc. (RISI). TESP specializes in developing solid state Electronic Safe & Arms for Military, Space, and Commercial (Oil Exploration/Production). RISI specializes in developing EBW and EFI detonators that integrate into Electronic Safe & Arms. Well established supplier of interconnect systems and High Voltage components for the aerospace industry in the Tracy, CA is seeking a Manufacturing (Mechanical) Technician. Responsibilities: Demonstrated ability to read and follow engineering notes, sketches, and drawings. Experience with mechanical diagnostic equipment, maintaining area controls, assisting with mechanical diagnostic calibration and alignment, testing prior to experiment execution, and performing data recovery after experiment execution Provide operations, maintenance, design, fabrication, assembly support, and maintain systems documentation and experimental records. Manage the tool identification, configuration control, storage and scheduled maintenance Experience in general machining processes with the ability to operate hand/power tools. Fabricate, assemble, and disassemble moderately complex mechanical components and systems, using work control process and procedure requirements while working under general supervision. Requirements: Associate degree in Mechanical or Manufacturing Engineering or equivalent from community college or trade-technical school 1-4 years related experience working with machines, presses, and power tools. Excellent analytical and reasoning skills Excellent communication skills both written and oral Ability to lift 50 lbs in a safe and controlled manner. MS Word, Excel, and Powerpoint AutoCAD, Inventor, and/or SolidWorks preferred In our efforts to maintain a safe and drug-free workplace, Teledyne RISI requires that candidates complete a satisfactory background check and pass a drug screen prior to employment. Due to the type of work at the facility and certain access restrictions, successful applicants must be a "US Person" (US Citizens, US Nationals, lawful permanent residents, asylees or refugees). Please note the salary range posted is a general guideline for this job level and location. When extending an offer, a variety of factors are considered such as responsibilities of the position, relevant education and experience, certifications, knowledge and skills. Salary Range: $37,200.00-$49,600.000 Pay Transparency The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

An IT automation engineer is responsible for designing, developing, testing, and deploying automation solutions for various IT processes and systems, both on-premises and in the cloud. The engineer will work on various tools and technologies to automate tasks such as software installation, configuration, testing, deployment, monitoring, and troubleshooting. Additionally, responsible for maintaining, providing support, be on-call and updating the automation workflows and ensuring their reliability, performance and resolve outages & support tickets. Furthermore, should have experience in full stack development and can create and maintain web applications and APIs that interact with the automation solutions. The engineer should also be proficient in programming languages such as Go, Rust, and Python and can use them to create and modify automation scripts and applications. Responsibilities Design, develop, test, and deploy automation scripts and workflows for various IT processes and systems, both on-premises and in the cloud Integrate automation solutions with existing IT tools and platforms such as cloud services, databases, servers, networks, security systems, etc. Monitor and troubleshoot automation issues and perform root cause analysis and resolution. Document and maintain automation standards, best practices, and procedures. Research and evaluate new automation technologies and trends and provide recommendations for improvement. Provide training and support to other IT teams and users on automation tools and solutions. Maintain and update the automation workflows and ensure their reliability and performance. Use programming languages such as Go, Rust, and Python to create and modify automation scripts and applications. Qualifications Bachelor's degree in computer science, engineering, or related field, or equivalent work experience. At least 5 years of experience in IT automation, DevOps, or related field. Proficient in various automation tools and technologies such as Ansible, Salt, PowerShell, Python, etc. Knowledge of IT systems and processes, both on-premises and in the cloud, such as cloud services, databases, servers, networks, security systems, etc. Strong problem-solving, troubleshooting, and analytical skills. Excellent communication, collaboration, and documentation skills. Proficient in programming languages such as Go, Rust, and Python. Experience in one or more tools such as Victoria Metrics, Nautobot, Salt Stack, Ansible, Grafana, BigPanda and Loki.

Join Yorke Engineering, LLC, an Environmental Consulting leader in California that implements Environmental Engineering and Compliance solutions for our clients throughout California. Our mission is to solve environmental compliance problems for industrial and governmental/infrastructure facilities. We are a growing and dynamic organization of highly respected professionals. Yorke Engineering, LLC has assisted over 1,400 client organizations with their Air Quality and Environmental Compliance, Engineering, and Permitting needs. Our philosophy is to efficiently help government and industrial customers with the complex array of environmental laws and regulations. From simple permits to complex agency negotiations, from small companies to the largest of California's organizations, Yorke successfully solves our clients' Air Quality and Environmental challenges. Our team has over 1,000 years of combined environmental experience and consists of engineers and scientists that specialize in Air Quality, Waste, Water, CEQA, Safety, and Industrial Hygiene. We are looking for a sharp Mid to Senior level Air Quality Engineer/Scientist (Environmental Permitting and Compliance) to join our team in Northern CA. This is a full-time position at 40 hours per week from one of our Northern CA offices (Berkeley, San Francisco, or San Jose) during our normal business hours. We offer competitive salaries, a full benefits package including Paid Time Off, Holidays, Full Medical/Dental/Vision, along with a 401k program with a generous company match. Position Summary: The Mid to Senior level Air Quality Engineer/Scientist (Environmental Permitting and Compliance) performs professional engineering work, leading and executing the compliance and permitting functions in relation to Air Quality Regulations and Compliance. This candidate will be reviewing processes and equipment, analyzing permit-related technical and regulatory issues, and communicating those analyses within Yorke, the client organization, with government agencies and with the public at large. The work is challenging, broad in scope, and variable from project to project. The position involves effective communication, decision-making, and time management. The candidate performs other duties as required or assigned. The candidate's experience and qualifications we are seeking include: 5-15+ years of work experience in the Air Quality and/or Environmental industry in an engineering role (preferably in a consulting environment); Experience in the environmental services industry focusing on Air Quality services: Process and equipment review; Air quality permitting under BAAQMD, SCAQMD, SJVAPCD and other Air Districts, including Title V Permitting; RECLAIM implementation and reporting; Annual Emissions Reporting; Air Dispersion Modeling; Air Quality Assessments including Data Analysis and Emission Inventories; General Air Quality Compliance for facilities in CA. Ability to be an active team member on project teams towards project completion within project scope, budget and schedule and ensure quality work product and deliverables; Ability to work with clients, staff, and regulators through effective communication and expertise by fostering a collaborative environment without losing focus of quality; Proven track record or desire to engage in successful regulatory work in dealing with the SCAQMD, BAAQMD, SJVAPCD, EPA, CARB and/or other similar regulatory agencies; Experience or desire to work on-site at client facilities; Prepare reports and submissions in timely manner; Experience with handling highly technical data and technical data interpretation; Highly motivated to continue working in Air Quality environmental field and expand their knowledge and experience; CA Regulatory/Compliance experience is required. Job Requirements: B.S or M.S. degree in Chemical Engineering, Environmental Engineering, or Mechanical Engineering, or other relevant technical degrees from an accredited college (minimum GPA of 3.0); Ability to work collaboratively in a team fashion, handle several projects at once, prioritize work, and work efficiently; Desire to learn or developing technical expertise in environmental rules and regulations; Excellent oral and written communications skills; Experience in conflict resolution and crisis management; Track record of successful analysis, interpretation, and application of rules and regulations towards practical solutions; Ability to think critically and develop solutions; Software Knowledge: Strong Microsoft Excel, Word, Outlook, and Powerpoint skills (required); Microsoft 365 Applications, including Sharepoint (a plus) EIT, CPP or P.E. Certification (a plus).

Russell Sigler Inc. is a leading independent distributor in the HVAC industry, specializing in Carrier products for over 50 years. Our mission is to deliver exceptional service and products while fostering a supportive work environment for our employees. Position Summary: The Technical Engineer provides design, systems application, and proposal preparation. Works with outside sales engineers, territory managers, and customer contracting and engineering accounts. Responsible for a variety of tasks including equipment selection, job pricing, creation of bid projects, producing submittals, placing orders, and other key job responsibilities including but not limited to the following: Key Duties and Responsibilities: Provide high-level independent ownership of projects of varying size at the different stages of execution, sometimes from start to finish including design, vetting, bidding, submittals, and final release of order Read, interpret, and make pricing and technical equipment selections, and decisions based on contract documents, including but not limited to engineering specifications, engineered equipment schedules, and architectural/engineering plans Review of engineering design and contractual documents to identify areas of risk and compliance Utilize mechanical engineering to verify mechanical equipment is being applied and implemented within the intended and acceptable range of operation Estimating and proposal writing of complex commercial engineered equipment and automation projects Technical specification writing and review Design and application support of external consulting engineering firms for commercial and industrial construction projects Project site visits for engineering and application support of commercial equipment and automation. Offsite project and opportunity meetings with contractors, engineers, owners, and complementary trades Management of multiple time-sensitive deadlines simultaneously Coordinate between the contracting sales department and engineering sales department on design changes and strategy Interact and work closely on a daily basis with outside sales engineers, territory managers, engineering firms, contractors, owners, project coordinators, central bid desk, credit department, order entry department, customer assurance department, warehouse employees, and manufacturers Provide independent high-level direct support for certain contractors, engineers, and outside sales engineers Coordination and verification of multiple external vendors and internal departments to create complex single-package equipment and automation solutions Work among a team to complete a large array of projects in varying phases, delegating work among each other, and independently completing Participate in the development and maintenance of standard operating procedures Attend and participate in job meetings, sales meetings, and trainings Participate in the training of others within and outside of the department Self and group leadership of technical development training and education Critical Knowledge and Skills: Accuracy, analytical skills, and attention to detail are required Exceptional communication and customer service skills Detail oriented Multitasking and organizational skills Good judgment and planning skills Work independently with minimal supervision in a fast-paced work environment Research using systems, software and product guides, catalogs, and manufacturing literature Review, evaluate, and make suggestions and product recommendations to customers as well as provide technical support when needed Knowledge of HVAC Carrier Products is preferred Knowledge of Carrier software (Quote Builder, Sage, HVAC Partners, ECAT, vendor websites) is preferred Work in a constant state of alertness and a safe manner Education and Experience: BS in Engineering is required, a Mechanical Engineering degree is preferred Must have a minimum 3-5 years of HVAC industry and sales experience Pay Range: Starting at $70,000.00 annum. ** Russell Sigler, Inc. (Sigler) is an equal opportunity employer. All applicants will be considered for employment based on merit, qualifications, and business need **

Who We Are We are a community built on care. Our caregivers and supporting staff extend compassion to those in need, helping to improve the health and well-being of those we serve, and provide comfort and healing. Your community is our community. Our Story We started out as a small operation in California. In May 1969, we acquired four hospitals, some additional care facilities and real estate for the future development of hospitals. Over the years, we've grown tremendously in size, scope and capability, building a home in new markets over time, and curating those homes to provide a compassionate environment for those entrusting us with their care. We have a rich history at Tenet. There are so many stories of compassionate care; so many "firsts" in terms of medical innovation; so many examples of enhancing healthcare delivery and shaping a business that is truly centered around patients and community need. Tenet and our predecessors have enabled us to touch many different elements of healthcare and make a difference in the lives of others. Our Impact Today Today, we are leading health system and services platform that continues to evolve in lockstep with community need. Tenet's operations include three businesses - our hospitals and physicians, USPI and Conifer Health Solutions. Our impact spreads far and deep with 65 hospitals and approximately 510 outpatient centers and additional sites of care. We are differentiated by our top notch medical specialists and service lines that are tailored within each community we serve. The work Conifer is doing will help provide the foundation for better health for clients across the country, through the delivery of healthcare-focused revenue cycle management and value-based care solutions. Together as an enterprise, we work to save lives and can accept nothing less than excellence from ourselves in service of our patients and their families, every day. Up to $30,000 Sign-On bonus based on experience Doctors Medical Center Modesto is a full-service, comprehensive health care facility, dedicated to providing the finest medical care for the community. From preventative and diagnostic services to expertise in some of the world's leading technologies, DMC's multidisciplinary team of physicians and healthcare professionals is dedicated to your good health and well-being. Recognized for innovative cardiac and neonatal intensive care to advanced stroke and trauma treatment, the outstanding doctors at DMC represent most major medical specialties and are committed to being there for you, when you need them most. We offer competitive salaries and benefits including a matching 401(k), several health & dental plans to choose from, generous tuition assistance plans, and relocation assistance for select positions. Comprehensive benefits for medical, prescription drug, dental, vision, behavioral health and telemedicine services Wellbeing support, including employee assistance program (EAP) Time away from work programs for paid time off, long- and short-term plan coverage Savings and retirement including a 401(k) Plan with a 50% match up to 6% of pay, employee stock purchase plan, flexible spending accounts, retirement readiness tools, rollover support, and financial well-being counseling Education support through tuition assistance, student loan assistance, certification support, and online educational program Additional benefits life insurance, supplemental health protection plans, auto and home insurance, legal counseling, identity theft protection, and employee discount program Registered nurses - Retirement medical benefit account (RMBA) - 2% of annual eligible income set aside in accordance with program guidelines Benefits may vary by location and role Relocation package offered for this position ************************* Summary: Reporting to the Director of Imaging Services and/or designee, the Diagnostic Imaging Technologist is responsible for radiological care to patients of all ages, for the purpose of diagnosis and/or treatment of anatomical and physiologic disorders using ionizing radiation. Must have working knowledge of conventional Radiology. Must be able to operate all X-ray equipment and PACS. Prepares exam room, equipment, supplies and medications for patient's procedures and is responsible for patient education. Proven competency in addition to conventional radiography, working knowledge in at least one other area CT, MRI, or Interventional Radiology if applicable competencies are met. May be required to take call. Sign on bonus doesn't apply to internal applicants BLS ARRT( R ) CRT Fluoroscopy permit required #LI-KB6 Tenet complies with federal, state, and/or local laws regarding mandatory vaccination of its workforce. If you are offered this position and must be vaccinated under any applicable law, you will be required to show proof of full vaccination or obtain an approval of a religious or medical exemption prior to your start date. If you receive an exemption from the vaccination requirement, you will be required to submit to regular testing in accordance with the law Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. Tenet participates in the E-Verify program. Follow the link below for additional information. E-Verify: ***************************** The employment practices of Tenet Healthcare and its companies comply with all applicable laws and regulations. ********** Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship.

A leading patent consulting firm in San Francisco is seeking a Patent Agent or Associate. The role requires a degree in engineering or related fields, registration to practice before the USPTO, and a law degree for attorneys. Candidates should be confident in discussing technical details and comfortable engaging with prominent tech companies. This position offers opportunities across various fields, including AI and clean energy. #J-18808-Ljbffr

Job Requirements Qualifications: Strong experience in automation testing using Playwright and Typescript (automation first mindset) Experience working as a Quality Assurance Engineer 3+ years' experience in manual testing Strong experience in API and Backend testing of cloud technologies Experience with API contract validation, versioning Experience working with SQL/NoSQL systems UI automation Strong coding experience with automated testing frameworks, tools and services Preferred Qualifications: Fluency in programmatic-level testing, user-level automation, and API level testing Experienced in Agile or Scrum software development methodologies Supply chain experience is plus Role details As a Quality Assurance Engineer, you will play a key role in setting up the testing strategy and tools for testing cloud software systems and features from the ground up. You will test a wide range of cloud technologies both in isolation and within the larger product ecosystem. The successful candidate for this role will be obsessed with finding and categorizing bugs, ensuring feature completeness and assessing reliability and performance of cloud systems. Proven experience as a Software Automation Engineer (2-3+ years) with strong hands-on skills in Playwright/TypeScript. An eye towards automation to perform repetitive testing tasks as well as regression testing covering various versions of end user client software. Provide coding and testing expertise for our team and be a constant advocate for our customers. High level of coding aptitude combined with a demonstrated passion for Quality Assurance and be responsible to own and drive complex projects. Test Automation Frameworks: Design and implement robust Test Automation Frameworks to ensure reusability, maintainability, and scalability of automation scripts. Continuous Improvement: Stay up to date with emerging technologies and best practices in test automation and continuously optimize the test automation process. Strong coding skills in TypeScript/React/Nest and Python/Java Proven experience in UI, API, and backend integration tests

Helping an on-demand, autonomous ride-hailing company find Engineering Technicians to support operations and ensure the smooth flow of materials across product development and manufacturing. In this role, you'll work with a motivated, high-energy team to ensure timely project completion within the engineering lab. You'll support cross-functional teams developing next-generation products where success is measured by quality, precision, and adherence to schedule. The ideal candidate is enthusiastic, innovative, and self-motivated, with a strong commitment to craftsmanship and continuous improvement. You're comfortable working independently on routine tasks, following detailed processes, and maintaining a high standard of work with minimal supervision. As an Engineering Technician, you'll: Assist engineers during new product development to optimize manufacturing processes. Support engineers in developing solutions and alternative assembly techniques to resolve technical issues. Accurately assemble and test a range of electronic hardware, from engineering prototypes through short-run production. Act as a quality delegate by inspecting work from other technicians in the engineering lab. Perform final product testing in accordance with written procedures. Maintain a clean, organized, and safe work area. Communicate clearly and effectively to ensure accurate and complete information sharing. Demonstrate reliability through consistent attendance and punctuality. Roles and Responsibilities: Must be able to follow directions while closely adhering to process detail for each assignment. Assist engineers during the development of new products to optimize the manufacturing process. Assist Engineers in the development of solutions and alternative assembly techniques to resolve issues. Accurately assemble and test a variety of electronic hardware from engineering prototypes through short run production. Perform as a Quality Delegate, inspecting work from other technicians in the Engineering Lab Carry out assignments in a safe and efficient manner. Be informative and communicate in a way that is complete, accurate and clear. Maintain a consistent track-record of attendance and prompt arrival at work. Perform final product testing in accordance with written procedures. Ensure your work area and equipment is kept neat, clean, and well organized. Required Skills: Bachelor's Degree with 4 to 6 years' experience in electro-mechanical assembly. Technical training, such as soldering, trade school, or OJT classes (preferred). Ability to read technical documents and drawings. Working knowledge of Google Suit including Docs, Sheets, and Slides, experience using a computer for entering data, and using the internet Ability to communicate effectively in English Proficient using standard assembly tools: cutters, crimpers, soldering irons, pin insertion/removal tools, and torque tools Hands-on lab experience such as soldering, power supplies, signal generators, oscilloscopes. Proficient verbal and written English language skills and prior experience working with product development teams in a low volume manufacturing setting. IPC-610, IPC-620, or JSTD-10

@HYVE Solutions, missions to help customers, business partners, and employees achieve success through shared goals, strategies, resources and technology solutions. Responsibilities: • Conducting various product and quality process server inspections • Documenting inspection results by completing reports and logs, and correctly inputting data into the quality database. • Conduct daily audits of the area they are assigned; verifying tools for proper torque and calibrations • Verifying proper Electrostatic discharge procedures Requirements: • Requires at least 6 months of related experience • High School diploma • Strong attention to detail • Ability to stand for a prolonged period • Ability to work on ladders • Manual dexterity • Must be able to effectively work within a team environment • Communicate and can follow verbal and written directions Hourly base rate: $22.00 Closing Date: 11/01/2025 @ HYVE Solutions, we believe employees are our greatest asset and we empower them to make a difference in our business. Diversity and inclusion make us all better. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Job Details Dynatect Ro-Lab - Tracy, CA Dynatect Ro-Lab - Tracy, CA Full Time High School $25.00 - $25.00 Hourly QA - Quality ControlDescription INFORMATION Department: Quality Reports to: Quality Manager Work Hours: Full-Time (approx. 40-hour workweek, Shift 1 or 2) FLSA Status NON-EXEMPT DESCRIPTION: The Quality Technician is responsible for performing required inspections of vendor supplied and Dynatect manufactured parts. These inspections are performed using criteria from applicable drawings, standards, specifications, and any other internal or external specified requirements. The Quality Technician is responsible for communicating with respective departments, vendors and individual employees to troubleshoot quality and process related issues. Additionally, the Quality Technician will be responsible for assisting and finding solutions to assigned internal and external complaints and corrective actions, and for assistance with identifying material and process non-conformances. The Quality Technician will also assist with continuous improvement projects that mitigate risk and ensure a quality product is delivered to the customer. PRIMARY RESPONSIBILITIES: Work in a safe and courteous manner. Perform product inspections. Perform calibration activities. Assist with resolving material and process non-conformities. Assist with continuous improvement activities. Promote and encourage a quality mindset in other employees. Attend Quality team meetings as scheduled. SECONDARY RESPONSIBILITIES: Perform other duties as assigned. SUPERVISORY RESPONSIBILITIES: None. Qualifications SKILLS AND ABILITIES Ability to keep accurate records. Be able to multi-task in a fast-paced environment. KNOWLEDGE AND EXPERIENCE Minimum of 3 years' experience in a manufacturing environment. Familiar with quality control and data analysis. Ability to follow documented procedures and standards. Proficient in Microsoft Office. Familiar with measurement equipment and its functionality.

Quality Technician will report to the Receiving Quality team lead and have the final goal to support the development of business processes to ensure that Ryzen's Client's products and services provide a high level of quality that meets the defined standards and specifications and in the end, the customer expectations. You will be helping in establishing high quality standards and will ensure product quality standards are met through inspection, documentation, and process improvement activities across receiving quality operations. You will support quality management systems by conducting audits, performing root cause analysis, and implementing corrective actions while collaborating with cross-functional teams to maintain high-quality standards in manufacturing and services. In this role you will: Perform part and vehicle level quality inspection to ensure the product is meeting specifications. Process incoming material and validate conformance to established quality standards Document various procedures and work instructions Support creating and reporting metrics to demonstrate quality status in NPI, manufacturing, and services Enter test result data into SAP and JIRA systems Help in Root Cause Analysis activities, Corrective Action implementation and validation Support process improvement activities Work with cross-functional teams as needed Qualifications Bachelor's degree with 6- 8 years of experience in the manufacturing environment (automotive, semiconductor, or aerospace fields are preferred). Experience in performing Quality inspections based on control plan Experience with Root Cause Analysis, Problem Solving and Quality Control methods Must be familiar with Google suites (words, docs, sheets) Strong planning, organizational, analytical, interpersonal, decision-making, oral and written communication skills Bonus Qualifications Electrical component (wire harness) inspection experience Previous experience in SAP and/or JIRA system Industry background and/or experience in; automotive, software, contract manufacturing, customer management Pay Rate: $35.00/HR - $45.00/HR

Design Quality Technician The Design Quality Technician -CMF will report to the Design Quality Team Lead and will be responsible for ensuring the visual and aesthetic quality of CMF (Color, Material, Finish) components meets design intent and defined quality standards. This role plays a key part in maintaining the highest quality standards for interior and exterior appearance parts through inspection, documentation, and continuous improvement activities. The technician will support the Design Quality and receiving organization by performing detailed color and material inspections, verifying visual harmony across components, and coordinating with suppliers and cross-functional teams to resolve quality issues and uphold brand standards. In this role, you will: Perform visual inspections of CMF parts to ensure compliance with specifications and design intent. Evaluate color, texture, gloss, and material harmony across multiple materials and components. Identify, label, and organize CMF samples and parts for inspection and shipment. Support supplier quality by returning nonconforming samples and documenting findings. Maintain inspection records, images, and data within Google Sheets, Docs, and shared databases. Collaborate with Design, Manufacturing, and Supplier Quality teams to resolve appearance-related issues. Utilize tools such as spectrophotometers or colorimeters to quantify color differences when applicable. Support root cause analysis and corrective action validation related to visual or CMF quality concerns. Qualifications: Bachelor's with 6-8 years of experience in a manufacturing or quality environment (automotive industry preferred). Demonstrated experience in color discrimination and color harmony evaluation. Ability to evaluate and compare color across multiple materials (plastic, metal, fabric, paint, etc.). Ability to lift to 50 pounds. Strong attention to detail and visual accuracy. Experience with basic data entry and documentation using Google Docs, Google Sheets, and other digital tools. Excellent organizational skills and the ability to manage multiple tasks with minimal supervision. Preferred Qualifications: Hands-on experience using spectrophotometers or colorimeters. Experience organizing and managing CMF sample libraries. Familiarity with automotive design quality or CMF processes. Goal-oriented mindset with strong communication and teamwork skills. Experience working with cross-functional teams including design, quality, and manufacturing. Previous experience in SAP and/or JIRA system Schedule: Monday to Friday from 8am - 5pm

The Quality Inspector is responsible in ensuring products and/or product components comply with specifications and quality standards. They test and inspect products at various stages of the production process against performance and customer integrity criteria to ensure product quality and reliability, and to determine the suitability of product release. Every team member is responsible for maintaining housekeeping and organization of the work area as well as following TE Connectivity's EH&S policies and procedures. This role complies to FDA QSR (21 CFR 820), ISO 13485 requirements and adheres to the Quality Management System (QMS). Responsibilities Interprets engineering drawings per ASME Y 14.5 and GD&T standards, interpret standard measurement units and their conversion formulas, record data from instruments to inspections sheets using Good Documentation Practices (GDP). Requires 100% guidance on daily activity. Select correct tools for measurement. Understand the ten times rule for measurement. Understand precision and accuracy measurement. Capable of using basic hand measurement tools (rules, calipers, snap gauges, micrometers, pin gauges, microscopes, drop gauges and timers). Selects products for tests at specified stages in production process, and tests products for attributes and/or variables requirements such as Visual, Dimensions, Performance, and Mechanical characteristics. Able to apply statistical quality control procedures such as inspection sampling plans (AQL, C=0, Z1.4, Z1.9). Capable of entering data into computer for analysis. Qualifications ASQ Certified Quality Inspection certification or Mitutoyo Quality Inspector training certification or equivalent college, technical school or Company In-house Quality Inspector training certification. Knowledge of FDA 21 CFR, part 820 Quality System Regulations Knowledge of Good Manufacturing Process and Good Documentation Practice Skills Good written and verbal communication skills Good Manufacturing Process and Good Documentation Practice Understands SOP's, MPI's, Procedures, Policies and Work Instructions Interprets engineering drawings per ASME Y 14.5 and GD&T standards and standard measurement units Select correct tools for measurement Capable of using basic hand tools (rulers, snap gauges, micrometer, pin gauge, microscope) Understands measurement methodology i.e. 10x rule for measurement, precision and accuracy Maintains detailed documentation and recording of data throughout inspection and testing Ability to write MRR's for failed units of inspection Clear understanding of FDA 21 CFR, part 820 Quality Systems Regulations ASQ Certified Quality Inspection or Certification/Mitutoyo Quality Inspector Training Certification Office 365 (Word, Excel & PowerPoint) 0 to 3 years' experience Competencies: To perform the job successfully, an individual should demonstrate the following competencies: Values: Integrity, Accountability, Teamwork, Innovation Excellent verbal and written communication skills Ability to work independently Ability to manage tight timelines and changing priorities Analytical and excellent problem-solving techniques Proficient with Microsoft office applications Generates creative solutions; demonstrates attention to detail Salary Range - $28.00 - $34.00

At Lilly, we unite caring with discovery to make life better for people around the world. We are a global healthcare leader headquartered in Indianapolis, Indiana. Our employees around the world work to discover and bring life-changing medicines to those who need them, improve the understanding and management of disease, and give back to our communities through philanthropy and volunteerism. We give our best effort to our work, and we put people first. We're looking for people who are determined to make life better for people around the world. Organization Overview: Lilly is entering an exciting period of growth and we are committed to delivering innovative medicines to patients around the world. Lilly is investing over $1 billion to create a new state-of-the-art manufacturing site, in Concord, North Carolina. The brand-new facility will utilize the latest technology to increase the company's manufacturing capacity in parenteral (injectable) medications, device assembly and packaging operations. This is an exciting once-in-a-lifetime opportunity to help build and operate a new site. The Lilly Concord site will be built using the latest high-tech equipment, advanced highly integrated and automated manufacturing systems, and have a focus on minimizing the impact to our environment. This is an opportunity you don't want to miss! Job Responsibilities: The Quality Assurance Batch Disposition Team assures patients worldwide of safe and efficacious drug and device products, through effective quality oversight of site activities. The QA Batch Disposition is responsible for final disposition of Semi-Finished and/or Finished drug combination products. The QA position is essential for ensuring GMP compliance in the qualification, validation, control strategy and startup of operations to ensure regulatory approval of the facility. Electronic batch records with high integration and focus on data integrity will be utilized to confirm manufacturing production. * Support the site in the development and execution of the site readiness plan with focus on supporting development of the site e-release process and startup of new systems * Performs final batch disposition of semi-finished and/or finished drug product and combination product batches, to ensure high quality medicine (GMP Compliance) is released to market in a timely manner * Effectively own/review/approve GMP documents to ensure quality attributes are met (i.e.: Deviations, procedures, protocols, specifications, and change controls) * Additional job duties as required Basic Requirements: * Bachelor's degree in STEM * Experience working in the pharmaceutical or medical device industry in QA roles * Previous batch disposition experience * Ability to make technical decisions, provide guidance to the site * Proficiency with applicable computer systems * Demonstrated strong oral and written communication skills * Demonstrated interpersonal skills and the ability to work as a team * Root cause analysis/troubleshooting skills * Demonstrated attention to detail and ability to maintain quality systems * Previous regulatory inspection readiness and inspection execution experience * Ability to travel up to 10% for meetings and coordination with global or existing manufacturing sites * Responsible for maintaining a safe work environment, working safely and accountable for supporting all HSE Corporate and Site Goals * Qualified candidates must be legally authorized to be employed in the United States. Lilly does not anticipate providing sponsorship for employment visa status (e.g., H-1B or TN status) for employment positions on the B or S paths or at levels M1-M2 or R1-R4. Additional Skills/Preferences: * Ability to work 8-hour days - Wednesday through Sunday Day Shift (not eligible for remote work) * Ability to work overtime and be on-call as required * Proven ability to work independently or as part of a Team to resolve an issue * Previous experience with Event and Change Management process * Proficiency with SAP, MES, and Trackwise * Previous experience with device and parenteral product materials Lilly is dedicated to helping individuals with disabilities to actively engage in the workforce, ensuring equal opportunities when vying for positions. If you require accommodation to submit a resume for a position at Lilly, please complete the accommodation request form (******************************************************** for further assistance. Please note this is for individuals to request an accommodation as part of the application process and any other correspondence will not receive a response. Lilly is proud to be an EEO Employer and does not discriminate on the basis of age, race, color, religion, gender identity, sex, gender expression, sexual orientation, genetic information, ancestry, national origin, protected veteran status, disability, or any other legally protected status. Our employee resource groups (ERGs) offer strong support networks for their members and are open to all employees. Our current groups include: Africa, Middle East, Central Asia Network, Black Employees at Lilly, Chinese Culture Network, Japanese International Leadership Network (JILN), Lilly India Network, Organization of Latinx at Lilly (OLA), PRIDE (LGBTQ+ Allies), Veterans Leadership Network (VLN), Women's Initiative for Leading at Lilly (WILL), en Able (for people with disabilities). Learn more about all of our groups. Actual compensation will depend on a candidate's education, experience, skills, and geographic location. The anticipated wage for this position is $65,250 - $169,400 Full-time equivalent employees also will be eligible for a company bonus (depending, in part, on company and individual performance). In addition, Lilly offers a comprehensive benefit program to eligible employees, including eligibility to participate in a company-sponsored 401(k); pension; vacation benefits; eligibility for medical, dental, vision and prescription drug benefits; flexible benefits (e.g., healthcare and/or dependent day care flexible spending accounts); life insurance and death benefits; certain time off and leave of absence benefits; and well-being benefits (e.g., employee assistance program, fitness benefits, and employee clubs and activities).Lilly reserves the right to amend, modify, or terminate its compensation and benefit programs in its sole discretion and Lilly's compensation practices and guidelines will apply regarding the details of any promotion or transfer of Lilly employees. #WeAreLilly

TekWissen provides a unique portfolio of innovative capabilities that seamlessly combines clients insights, strategy, design, software engineering and systems integration. Our tightly integrated offerings are tailored to each clients requirements and span the services spectrum from Application Development/Maintenance, testing, IT Consulting & staffing for IT Infrastructure Management through strategic consulting and industry oriented Business Process. Our end-to-end Business Process as a Service (BPaaS) solutions support complex, high-value, knowledge based work. Combining applications, platforms, infrastructure, knowledge processes, and domain expertise allows us to deliver greater efficiencies and innovative business capabilities. Qualifications Position:Quality Technician III Location:San Jose,CA Pay Rate : $30.00 - $35.00/hr. Essential Duties & Responsibilities: * With limited supervision, assures policies, procedures, inspection techniques and quality plans conform to established standards * Performs complex analyses and tests of raw materials, packaging materials and/or finished products from manufacturing to ensure quality standards and compliance to customer and regulatory requirements * Monitors performance of inspectors and institute corrective action when necessary * Trains new inspectors and department personnel on policies, procedures, inspection techniques and quality plans * Assures gauges are within the current calibration cycle and are properly used and stored. Arranges for repair of gauges as needed. * Participates in design of experiments and process capability studies * Reviews Statistical Process Control (SPC) data. Maintains integrity of SPC data by correcting input errors and follows up with retraining of inspectors if needed. * 4+ years related experience and/or training * Experience certifying typical metrology equipment such as calipers, micrometers and computer controlled gauging equipment * General knowledge of blue prints, engineering specifications interpretation, inspection using measuring and test equipment, including CMM, FARO ARM and measurement techniques, geometric dimensioning and tolerance and quality calibration processes required. Additional Information If you are available, interested, planning to make a change, or know of a friend who might have the required qualifications and interest, please call me ASAP at ************ Thanks & Regards, Monika

About Applied Aerospace: Join the team that builds for the best. At Applied Aerospace, we design, fabricate, and test mission-critical aerospace components for leading innovators like SpaceX, NASA, Northrop Grumman, and Boeing. Every part we create reflects our relentless commitment to quality, reliability, and performance. Through precision engineering and purpose-driven innovation, we're helping take aerospace technology to new heights - and we're looking for talented individuals who want to be part of that journey. OVERVIEW OF POSITION: Our company is currently seeking a dedicated and detail-oriented Quality Inspector to join our team. As a Quality Inspector, you will be responsible for conducting in-process inspections using hand inspection tools such as micrometers, calipers, height gauges, and other measurement equipment. Your primary role will be to ensure that our products meet the highest quality standards before they move forward in the production process. ESSENTIAL JOB FUNCTIONS: * Perform in-process inspections using various hand inspection tools, including micrometers, calipers, height gauges, etc. * Follow work instructions and inspection guidelines to accurately assess product quality. * Pay meticulous attention to detail, identifying any defects, deviations, or non-conformances during inspections. * Read and interpret Mylar's and blueprints to verify product dimensions and specifications. * Collaborate with production teams to address and resolve any quality issues that may arise. * Assist in reporting non-conformances and documenting inspection results accurately. * Continuously learn and adapt to new inspection techniques, tools, and technologies. * Maintain a clean and organized work area. * Perform thorough examinations of all materials and finished products. * Implement and improve quality control operating procedures. * Identify and troubleshoot equipment problems and defects. * Other job duties as assigned. GENERAL: * Associate level should have 2-5 years' experience in Quality. * General level should have a total of 5+ years' experience in Quality. * Senior level should have a total of 10+ years' experience in Quality. * High school diploma or equivalent. * Proven experience as a Quality Inspector or in a similar role, preferably in a manufacturing environment. * Proficient in using hand inspection tools such as micrometers, calipers, height gauges, and other measurement equipment. * Excellent attention to detail and ability to identify defects and non-conformances. * Strong communication skills and ability to collaborate effectively with cross-functional teams. * Familiarity with quality control processes and standards. * Basic computer skills for documenting inspection results. * Ability to work independently and prioritize tasks effectively. * Willingness to learn and adapt to new technologies and inspection methods * Strong attention to detail. * Strong analytical and critical thinking skills. * Excellent written and verbal communication skills. * Previous experience in a manufacturing or production environment. * Knowledge of quality management systems. * Familiarity with ISO standards. * Ability to read and interpret Mylar's and blueprints. * Experience with non-conformance reporting. This job description is not intended to be all-inclusive. Employees may perform other related duties as assigned to meet the ongoing needs of the Company. Applied Aerospace is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. Applied Aerospace is committed to working with and providing reasonable accommodation to individuals with disabilities or individuals who may need religious or medical accommodation. If you need accommodation because of a disability, medical, or religious reason for any part of the employment process you can notify the Human Resources Department, and your request will be reviewed.

Who We Are We are a community built on care. Our caregivers and supporting staff extend compassion to those in need, helping to improve the health and well-being of those we serve, and provide comfort and healing. Your community is our community. Our Story We started out as a small operation in California. In May 1969, we acquired four hospitals, some additional care facilities and real estate for the future development of hospitals. Over the years, we've grown tremendously in size, scope and capability, building a home in new markets over time, and curating those homes to provide a compassionate environment for those entrusting us with their care. We have a rich history at Tenet. There are so many stories of compassionate care; so many "firsts" in terms of medical innovation; so many examples of enhancing healthcare delivery and shaping a business that is truly centered around patients and community need. Tenet and our predecessors have enabled us to touch many different elements of healthcare and make a difference in the lives of others. Our Impact Today Today, we are leading health system and services platform that continues to evolve in lockstep with community need. Tenet's operations include three businesses - our hospitals and physicians, USPI and Conifer Health Solutions. Our impact spreads far and deep with 65 hospitals and approximately 510 outpatient centers and additional sites of care. We are differentiated by our top notch medical specialists and service lines that are tailored within each community we serve. The work Conifer is doing will help provide the foundation for better health for clients across the country, through the delivery of healthcare-focused revenue cycle management and value-based care solutions. Together as an enterprise, we work to save lives and can accept nothing less than excellence from ourselves in service of our patients and their families, every day. Up to $30,000 Sign-On bonus based on experience Welcome to Doctors Medical Center Modesto! Doctors Medical Center Modesto is a full-service, comprehensive health care facility, dedicated to providing the finest medical care for the community. From preventative and diagnostic services to expertise in some of the world's leading technologies, DMC's multidisciplinary team of physicians and healthcare professionals is dedicated to your good health and well-being. Recognized for innovative cardiac and neonatal intensive care to advanced stroke and trauma treatment, the outstanding doctors at DMC represent most major medical specialties and are committed to being there for you, when you need them most. We offer competitive salaries and benefits including a matching 401(k), several health & dental plans to choose from, generous tuition assistance plans, and relocation assistance for select positions. Comprehensive benefits for medical, prescription drug, dental, vision, behavioral health and telemedicine services Wellbeing support, including employee assistance program (EAP) Time away from work programs for paid time off, long- and short-term plan coverage Savings and retirement including a 401(k) Plan with a 50% match up to 6% of pay, employee stock purchase plan, flexible spending accounts, retirement readiness tools, rollover support, and financial well-being counseling Education support through tuition assistance, student loan assistance, certification support, and online educational program Additional benefits life insurance, supplemental health protection plans, auto and home insurance, legal counseling, identity theft protection, and employee discount program Registered nurses - Retirement medical benefit account (RMBA) - 2% of annual eligible income set aside in accordance with program guidelines Benefits may vary by location and role Relocation package offered for this position ************************* Job Summary: Reporting to the Director of Imaging Services and/or designee, the Diagnostic Imaging Technologist is responsible for radiological care to patients of all ages, for the purpose of diagnosis and/or treatment of anatomical and physiologic disorders using ionizing radiation. Must have working knowledge of conventional Radiology. Must be able to operate all X-ray equipment and PACS. Prepares exam room, equipment, supplies and medications for patient's procedures and is responsible for patient education. Proven competency in addition to conventional radiography, working knowledge in at least one other area CT, MRI, or Interventional Radiology if applicable competencies are met. May be required to take call. Sign on bonus doesn't apply to internal applicants BLS ARRT( R ) CRT Fluoroscopy permit required #LI-KB6 Tenet complies with federal, state, and/or local laws regarding mandatory vaccination of its workforce. If you are offered this position and must be vaccinated under any applicable law, you will be required to show proof of full vaccination or obtain an approval of a religious or medical exemption prior to your start date. If you receive an exemption from the vaccination requirement, you will be required to submit to regular testing in accordance with the law. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. Tenet participates in the E-Verify program. Follow the link below for additional information. E-Verify: ***************************** The employment practices of Tenet Healthcare and its companies comply with all applicable laws and regulations. ********** Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship.