Quality technician jobs in Houston, TX - 510 jobs

Position: QA/QC Commissioning Associate III Location: Houston, TX Job Id: 796 # of Openings: 1 TITLE: QA/QC Commissioning Associate III LOCATION: Houston, TX POSITION SUMMMARY: The QA/QC Commissioning Associate III assists in quality control and quality assurance of data center critical systems preparing for the commissioning process. The QA/QC Commissioning Associate assists the QA/QC Engineer to ensure that the correct equipment has been purchased and that installation is in accordance with industry standards and equipment specifications. This role will develop skills and industry knowledge to perform increasingly more complex commissioning tasks. ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Develop QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents Follow all standards to perform inspection and tests on all procedures and oversee all testing methods and maintain high standards of quality for all processes Review the quality of all materials at the site and ensure compliance with all project specifications and quality and collaborate with the department for all material procurement and maintain a quality of materials Support the effective implementation of all test and inspection schedules and ensure adherence to all procedures and coordinate with various teams to perform quality audits on processes Assist employees to ensure knowledge of all quality standards and ensure compliance to all quality manuals and procedures and collaborate with contractors and suppliers to maintain the quality of all systems Manage to lift all types of equipment and handle the efficient storage of all hazardous materials and perform quality audits as per the required schedule Understand all products and non-conformance processes and evaluate all documents to ensure the maintenance of optimal quality and prepare monthly reports to evaluate performance Monitor an efficient system and record for all project activities and analyze all processes to ensure all work according to quality requirements Understand all work methods and maintain knowledge on all quality assurance standards and monitor continuous application for all quality assurance processes and recommend corrective actions for all processes Support and follow a method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project Liaise the Technical Engineer for submission of material submittals to Consultant Develop and maintain inspection reports Ensure compliance to federal and state laws, as well as company standards and specifications Maintain calibration of quality testing equipment Perform inspections across all stages of production Advising on procedures to improve production efficiency Prepare and maintain test data for review Evaluate data and draft reports, noting any relevant deviations from existing standards Identify areas for quality control improvement and implement new methods accordingly Communicate quality or compliance concerns with urgency QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience (Desired): Technical Military MOS, trade school and/or degree Experience and/or education and internship in complex facilities or mission critical projects is preferred Any civilian or military technical certifications is a plus Experience with writing and enforcing standard operating procedures (SOPs) Solid understanding of test equipment & software Minimum of 5-9 years of inspection and/or production experience Strong working knowledge of various mathematical concepts including fractions, ratios, and proportions Demonstrated ability to work independently with minimal supervision Excellent organizational skills Demonstrated ability to analyze and interpret information Must be a US citizen Must be able to travel 70% Computer Skills: Advanced Excel skills preferred Experience using Microsoft Office Suite, Word and Microsoft Project Basic knowledge of systems design for various projects Certificates and Licenses: No certificates or licenses required Supervisory Responsibilities: No supervisory responsibilities for this position. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasionally lift and or move objects 10 to 50; Frequently required to stand, walk, stoop, kneel, crouch or crawl. The employee is occasionally required to sit and climb or balance. Specific vision abilities for this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust and focus. Noise Level can be moderate to high. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. CPG Participates in E-Verify #:LI-TG1 Pay Range: $74,851 - $112,222 per year Apply for this Position

Main Purpose: The Quality Control Inspector is responsible for ensuring all fabricated components, assemblies and finished enclosure packages meet Englobal quality standards, customer specifications and applicable codes and regulations. This role works closely with production, engineering and project management to identify issues early, maintain documentation and drive continuous improvement across the shop floor. Essential Functions: * Own and maintain Englobal Quality Management Systems including continually working with operations to improve production quality while improving schedule * Address customer feedback and complaints, acting as a key contact for quality-related inquiries * Develop and execute comprehensive test plans for system walk-downs, final inspections and startup sequences * Interact routinely with Purchasing, Engineering, Sales and other stakeholders to proactively improve the quality of components and completed assemblies * Analyze operational capabilities, develop and maintain quality performance metrics * Perform Quality System audits and provide support for areas in need of continuous improvement * Partner with the Engineering department to review (and correct) all shop fabrication drawings before they are released to the floor * Manage and execute all pre and customer witnessed Factory Acceptance Testing activities * Travel occasionally, approximately 5-15% * Identify potential conflicts, deviations or non-compliance issues during the fabrication and integration phases and develop corrective action plans * Lead internal and external audits to ensure adherence to federal, state, and local codes, as well as project-specific specifications * Work with dedicated Fabrication Quality Inspector to perform the following: * Monitor weld procedures or ASME code requirements to verify compliance with company, customer and code specifications * Maintain compliance to ASME weld procedures and train shop personnel and your direct reports in the following QC measurements, weld procedures, materials traceability and all other ASME documentation requirements including shop traveler generation and various different data reports that our vessels require. POC for collaborating with AI inspectors for code jobs * Participate in tri-annual review of ASME stamp certifications * Prepare and maintain various ASME QC records both for fabricated equipment as well as ASME documentation for our welding staff (e.g. WPS, PQR and weld qualification testing and continuity records) including responding to supplier / customer corrective action and respond to non-conformances, either internally generated or customer generated * Perform other duties assigned by supervisor Benefits Offered: * Earned Wage Access * Health, Dental, and Vision Insurance * 401(k) with Company Match * Paid Holidays * Paid Vacation * Life Insurance * Disability Insurance * Safety Awards * Company Store * Employee Assistance Program (EAP) Requirements Physical Requirements: * Standing, sitting, walking, stooping, kneeling, climbing, feeling, talking, hearing and seeing * Turning, twisting, bending, and balancing * Pushing, pulling and reaching * Must be able to lift and/or move up to 25 pounds and occasionally 50-75 pounds Job Requirements: * Bachelor's degree in a Quality related field * 5+ years of experience in quality inspection or an equivalent combination of education and experience * Must have overall work process knowledge to support the development and maintenance of the quality management system * Must have problem solving skills to apply methods for RCA (Root Cause Analysis). Understanding of DFMEA (Design Failure Mode Effect Analysis) and PFMEA (Process Failure Mode Effect Analysis) * Knowledge of supplier manufacturing processes and required error proofing and other quality systems as needed to provide flawless quality * Knowledge of regulatory requirements (NEC, NFPA, ATEX, IECEX, ISO, API, ASNT, ASME, AWS, etc.) * Knowledgeable in ASME inspection process - incoming inspection, material certification and marking requirements and in-process inspection * ASME Knowledge in code sections for hydrostatic testing and be able to generate ASME records (required data reports, shop travelers, etc.) * ASME Section I, IV or VIII and B31.3 code knowledge along with AWS code specifications required * Must be meticulous about capturing and retaining information * Must have basic computer skills (Word, Excel, Record-keeping software, etc.) * Must be able to work in a team environment and be able to explain issues clearly to team * Must be analytical and detail oriented * Must be able to pass pre-employment drug screen * Must be able to pass a background check Desirable Experience, Education, and Training: * Previous supervisory experience * High School Diploma or equivalent preferred Tools, Equipment, and Technology: * Computer Environmental Conditions: * Manufacturing and fabrication shop environment * Mix of shop floor and office/documentation work * May require walking the yard, climbing stairs and inspecting large assemblies Englobal a Gulf Island Company will not sponsor applications for work visas. Additionally, applicants for employment with Englobal a Gulf Island Company, must be currently authorized to work in the United States on a full-time basis. Accordingly, Englobal a Gulf Island Company, will not consider applications from candidates who require the company to sponsor a work visa and who are not currently authorized to work in the United States on a full-time basis. Englobal a Gulf Island Company is not accepting unsolicited candidates from search firms for posted employment opportunities. Please no phone calls or emails. All resumes submitted by search firms to Englobal a Gulf Island Company, employees via email, the internet, or any other form and/or method without a valid written search agreement in place for the position will be deemed the sole property of Englobal a Gulf Island Company. No recruiting placement fee will be paid in the event Englobal a Gulf Island Company, hires the candidate due to the referral or through other means.

1. Perform in-process and final inspections on fabricated parts, weldments, assemblies, and structural components. 2. Verify dimensions using calipers, micrometers, gauges, tapes, weld gauges, and other precision measuring tools, prepare reports. 3. Review and interpret engineering drawings, welding symbols, fabrication standards, and customer specifications. 4. Review NDE reports, prepare ncr when necessary. 5. Ensure products meet quality standards, customer requirements, and regulatory codes. QUALIFICATIONS: 1. High school education or equivalent. 2. Ability to use appropriate measuring and test equipment. 3. Product familiarity working in a similar environment. TRAINING REQUIRED: 1. Strong attention to detail, accuracy and problem solving skills. Ability to read and interpret engineering drawings and specifications. 2. Performing dimensional inspections. 3. Experience with NDT methods. (VT, MT, PT) 4. Experience working with ITPs, MTRs and fabrication quality documentation PPE AND SAFETY: 1. Follow all shop safety policies, including PPE requirements. 2. Reasonable accommodations are made to enable

- Track, store and maintain part and product documentation in accordance with the Quality Management System - Propose improvements to the documentation management process - Communicate with internal customers to provide traceability and product documentation - Ensure all inspection and test activities are conducted safely. Participate in creation and review of HClientard Analysis and Risk Control for these activities. - Maintains HSE reporting requirements. - Inspect documentation, parts, components, materials, subassemblies and drilling equipment against written specifications. - Comply with applicable company written inspection procedures and standard work. - Perform manufacturing and engineering tests in compliance with applicable procedures and standard work. - Documents all deviations from engineering documents, inspection procedures and standard work. - Assist in designing tests and fixtures and their set-up. - When authorized, perform calibration of measurement systems. - Be familiar with inspection and test procedures, standard work and test plans, and provide input to continuously improve them. - Check that the assembly or production line adheres to standards and procedures. - Proposing improvements to the production process - Recording inspection results by completing reports, summarizing re-works into quality database **Responsibilities:** - Good written and verbal communication skills - Excellent problem-solving and analytical skills - Ability to use measuring devices like gauges, meters, calipers, and computers - Documentation and reporting skills - Attention to detail - Teamwork and collaboration - Actively working on the shop floor - Basic computer skills. **Experience:** - Entry level position 3-5 years of experience in quality. **Skills:** - Technology or Manufacturing - Non-Conformance Management - Documentation Management - Sub-arc welding inspection experience - Basic math skills - Excel knowledge - SAP knowledge - Visual Factory knowledge **Education:** -HSD **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

American Packing & Gasket (APG) is seeking a Manufacturing Specialist to join our dynamic production team. This role is responsible for fabricating, assembling, and inspecting precision components used in fluid sealing, conveyance, and industrial applications. You will work closely with our engineering and quality teams to ensure every product meets our high standards of accuracy, safety, and compliance. If you enjoy hands-on work, take pride in producing high-quality parts, and thrive in a fast-paced manufacturing environment, this position is for you. Key Responsibilities Manufacturing & Fabrication Operate machinery, cutting tools, and equipment to fabricate gaskets, seals, and other custom components to exact specifications. Follow CAD/CAM drawings, technical prints, and work instructions to ensure precision manufacturing. Utilize hand tools, dies, and templates for custom parts fabrication. Assembly & Production Perform light assembly of components, subassemblies, and finished products. Package and label finished goods per customer and quality requirements. Collaborate with cross-functional teams to ensure efficient production flow. Quality Control & Safety Inspect parts for dimensional accuracy, material integrity, and quality compliance. Document measurements, lot codes, and inspection results for traceability. Follow all safety protocols, including proper handling of materials and use of PPE. Collaboration & Continuous Improvement Communicate effectively with supervisors, engineers, and quality teams to resolve production challenges. Suggest improvements to processes and workflow to enhance productivity and reduce waste. Maintain a clean and organized work area in compliance with ISO 9001 standards. Requirements 1+ years of experience in manufacturing, assembly, or a related field. Basic mechanical aptitude and familiarity with hand tools and measuring instruments (calipers, micrometers, etc.). Ability to read and interpret technical drawings and work instructions. Strong attention to detail and commitment to quality. High school diploma or equivalent. Preferred Experience in gasket fabrication, plastics, industrial sealing, or light assembly environments. Familiarity with CAD/CAM systems or CNC equipment. Knowledge of ISO 9001 quality systems. Physical & Work Environment Requirements Ability to stand, walk, bend, and lift up to 50 lbs for extended periods. Comfortable working in a production environment with moderate noise and machinery. Willingness to wear required PPE, including safety glasses and gloves. Salary Description 15.00 per hour

TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Quality Control Technician to join our team in Houston, TX. In this role you will ensure timeliness, completeness and accuracy of work performed by technicians. You will perform inspections post-install to ensure compliance to client specifications and complete reviews to ensure proper restoration of the area. You will be meeting at this address each day before going out to the work site: 13805 West Rd STE 100. Houston, Tx 77041 Why TAK? * Full Time * Paid Weekly * Compensation: $16 - $20 per hour, DOE * Full Benefits Package (Medical, Dental & Vision) * Paid Time Off * 401(k) with Company Match! * 25K Company Paid Life Insurance * Independent Work & Team Collaboration * Career Development & Advancement Opportunities! The Role * Ensures timeliness, completeness and accuracy of work performed by technicians * Performs inspections post install to ensure compliance to client specifications * Completes reviews to ensure proper restoration of area * Captures photos and attach to the inspection report * Performs white line excavations and collects locate data * Verifies the system is complying with all safety requirements * Performs work in a safe manner, following all OSHA and company guidelines * Prioritizes, organizes and efficiently completes tasks to meet deadlines * Works in a variety of outdoor environments * Drives Company vehicles responsibly and safely * Conducts and attends meetings as needed Requirements * 2+ years of telecommunications (i.e. cable, internet, telephone, wireless) industry experience required * Experience with quality control and verifications * Experience calling in Bluestakes a plus * Experience with underground locates and the ability to use a compass for directional instructions * Basic mechanical aptitude, ability to utilize hand tools for intended purposes * Ability to travel daily around to various work sites and open to a variety of schedules * Excellent customer service, time management, problem-solving and troubleshooting skills * Ability to learn and operate testing equipment and software/programs * Ability to utilize hand tools, identify wire size/color and accurately utilize measuring devices * Ability to carry, climb, operate, and work upon an extension ladder (approximately 28 feet high and 75 pounds) * Ability to complete work indoors, outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time * Ability to safely navigate various terrains, managing equipment and tools * A body weight of no more than 275 pounds to perform ladder work safely. Safety is our #1 Priority. If personal safety is not compromised, an accommodation may be available based on previous ladder experience in a similar role * Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving * Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting *****************************. Salary Description $16 - $20 per hour, DOE

We are searching for a Specialist in Quality Improvement with the Outpatient Fetal Center at The Pavilion for Women location- someone who works well in a fast-paced setting. In this position, you will work as part of the Quality & Outcomes Management (Q&OM) Team to achieve high quality, cost-effective health care throughout the Texas Children's Hospital System and maintain the necessary accreditation status for the organization (JCAHO, HCFA, NCQA, and other agencies, as needed). Think you've got what it takes? Qualifications Bachelor's degree in Nursing, Pharmacy, Social Sciences (Social Work), Respiratory Therapy, Health Information Management, or Business Administration 2 years of clinical and/or quality experience Certifications/Licenses: preferred CPHQ - Cert-Cert Prof Healthcare Qual RN - Lic-Registered Nurses or other clinical discipline Responsibilities Produces reports for quality improvement, guidelines, utilization, and outcomes, error-free and on time. Educates medical staff departments, administrative staff, and ancillary service departments regarding the tools of performance improvement, methods for measurement, analysis, and reporting to meet the standards of the JCAHO, HCFA, NCQA or other regulatory agencies. Provides medical staff and departmental staff teams with consulting and analysis services to support initiatives intended to achieve breakthrough or incremental process improvement in patient care, as measured by at least one improvement, worthy of storyboard, per area of responsibility per year. Produces guidelines and measures for medical management in a timely, efficient manner Provides Ongoing Professional Practice Evaluations, Focused Professional Practice Evaluations for areas of responsibility as defined by Joint Commission standards on time and error free. Provides opportunities and strategies for improvement of System entities and services as evidenced by at least two (2) improvements resulting from recommendations made. Participates in and coordinates committees Attends performance improvement, medical management and other System committees as scheduled. Prepares reports on Q&OM activities as needed for informing clinical, operations, and financial stakeholders, on time and error-free.

Be Safe Always. Do the Right Thing. Provide Great Service. Take the Initiative. Be an Endless Learner.At Bayou Processing & Storage, these aren't just words, they're the foundation of how we operate every day. We're a trusted steel processing and storage company serving customers who rely on precision, safety, and quality. We're looking for a Quality Control (QC) Representative who takes pride in getting it right the first time. In this hands-on role, you'll inspect finished steel products, verify they meet customer specifications, and help maintain the high standards that make Bayou a leader in our industry. What You'll Do Inspect and measure finished steel products to ensure they meet customer and company quality standards. Identify, report, and document any non-conforming material or process issues. Prepare quality reports and inspection documentation with accuracy and detail. Communicate results and suggest corrective or preventive actions when needed. Label, package, and prepare materials for shipment to customers. Review outgoing shipments for accuracy and quality compliance. Safely operate forklifts, overhead cranes, and other equipment as required. What You Bring High attention to detail and commitment to safety and quality. Strong organizational and time management skills. Ability to read and interpret customer drawings and specifications. Familiarity with carbon steel plate, rolling, burning, and beveling preferred. Experience using measuring tools and completing quality documentation. Positive, team-oriented attitude with good communication skills. High School Diploma or GED required; 2+ years of quality inspection or related experience preferred. Physical Requirements Ability to lift up to 45 lbs. and remain on your feet for extended periods. Must wear required PPE (hard hat, safety glasses, steel-toe boots, gloves, hearing protection). Comfortable working around heavy materials and industrial equipment. Why Join Bayou Processing & Storage? At Bayou, you'll be part of a team that values integrity, safety, and continuous improvement. We invest in our people - offering opportunities to learn, grow, and take pride in meaningful work that keeps America's industries moving. Join a team that does the right thing, every time. Apply today and build your career with Bayou Processing & Storage.

-Conduct daily quality inspections on automotive components and production parts. - Perform measurements, testing, and documentation in compliance with customer and IATF/ISO standards. - Support incoming material inspections and ensure suppliers' parts meet specifications. - Prepare quality reports, maintain inspection records, and escalate issues to engineers or supervisors. - Assist in root cause analysis and corrective action implementation under engineer's guidance. - Operate inspection tools such as calipers, micrometers, gauges, and CMM machines. Requirements Associate degree in a technical field. - 1-3 years of quality inspection experience in manufacturing, preferably in automotive or mechanical components. - Familiar with quality tools and basic problem-solving (e.g., 5 Why, Pareto). - Hands-on skills and attention to detail, willing to work on the production floor. - Basic computer and reporting skills (Excel, ERP systems).

Job DescriptionRole and ResponsibilitiesPassionate about quality and manufacturing excellence? Join our team as a Quality Technician and help ensure our products, processes, and systems meet the highest standards. Collaborate with engineering and operations to drive continuous improvement and deliver outstanding results. Responsibilities Conducted inspections, tests, and measurements to ensure products consistently met quality standards. Identified defects, documented trends, and recommended process improvements that enhanced efficiency and product reliability. Supported root cause analysis and implemented corrective actions, reducing recurring quality issues. Collaborated with cross-functional teams to maintain process compliance and streamline operations. Assisted in developing and maintaining quality systems and documentation, ensuring regulatory and customer standards were met. Monitored product and process performance, driving improvements in yield and consistency. Led continuous improvement initiatives to optimize processes and reduce waste. Ensured adherence to company and customer quality requirements, contributing to high levels of customer satisfaction. Qualifications and Education Requirements Associate or bachelor's degree in engineering, Quality, or related field preferred Hands-on experience in manufacturing or quality inspection Strong attention to detail and problem-solving skills Knowledge of quality standards (ISO, GMP, or similar) is a plus Excellent communication and teamwork skills Powered by JazzHR l3ywb5H2So

Job Description The Customer Technical Quality Technician I (CTS - Tech One) is an entry-level, execution-focused role that supports customer quality claims and failure investigations. This position is responsible for hands-on laboratory activities, sample handling, first-level inspections, and accurate documentation to ensure timely, traceable, and high-quality analysis. This role does not own customer communication or root-cause conclusions but enables successful technical resolution through disciplined execution and evidence integrity. 2. Roles and Responsibilities: Sample Receipt & Traceability • Receive, register, label, and track returned customer samples immediately upon arrival. • Ensure full traceability and accurate data entry within the HDQ system. • Maintain organized storage of samples, test results, and documentation. First-Level Investigation (FLI) • Perform first-level technical inspections following defined procedures. • Conduct visual inspections, dimensional checks, and basic measurements. • Properly open samples using approved, non-destructive methods. • Capture clear, high-quality photographs and videos documenting findings. Documentation & System Support • Upload inspection results, measurements, photos, and notes into HDQ. • Support CTS Engineers with complete and accurate technical data. • Ensure documentation meets internal quality and audit standards. Laboratory & Equipment Support • Maintain cleanliness and organization of laboratory and work areas. • Ensure proper handling, calibration awareness, and care of tools and equipment. • Follow all safety, quality, and handling procedures. Collaboration & Development • Work closely with Customer Technical Quality Engineers and CTS leadership. • Support plant and technical center requests for additional inspection data. • Continuously develop technical knowledge of hose construction, fittings, and materials. 3. Qualifications & Skills: Required: • Technical diploma, associate degree, or equivalent hands-on technical experience. • 1-2 years of experience in laboratory, quality, manufacturing, or technical support roles. • Basic mechanical aptitude and familiarity with precision measurement tools. • High attention to detail and ability to follow standardized procedures. • Fluent in Spanish (spoken and written). • Valid passport with ability to travel throughout North and South America. • Basic proficiency in Microsoft Office (Excel, Word). Preferred: • Exposure to hydraulic hoses, fittings, or rubber products. • Experience working in a manufacturing, quality, or laboratory environment. • Bilingual

The Certification Technician role involves compiling, reviewing, and distributing final product certifications for Turbine and Energy products. This position requires proficiency in handling certifications, ADRs, cut verifications, and raw material certifications. The individual will also contribute to other responsibilities within the certification group. PRIMARY DUTIES AND RESPONSIBILITIES: • Compile, review, and distribute final product certifications for Turbine and Energy products. • Cover weekend certifications based on a rotating schedule, ensuring timely completion. • Create ADRs (Alloy Data records) and ZCMSs (Material Ordering documents) within the Oracle system. • Review, enter, and release Raw Material Certifications. • Perform Cut Verifications to ensure adherence to quality standards. • Review Powder Conformance packages for compliance with standards and specifications. REQUIRED SKILLS: • Proficient in MS office including outlook, excel, word • Ability to multi-tack in a fast-paced environment • Experience in Oracle or another ERP system is strongly preferred • Proficient with Adobe Acrobat • Knowledgeable on ISO 9000, AS9100, API certifications is a plus EDUCATION: • High school diploma at Min but would prefer some College EXPERIENCE: • 1-2 years of relevant experience preferred (This is flexible) WORK CONDITIONS: • Safety Gear: Requires the use of personal protective equipment (PPE) such as safety glasses, ear protection, and steel-toed boots. • Movement: Regular movement throughout the manufacturing floor, including standing, walking, and occasionally lifting up to 30 pounds. HOURS: 1ST SHIFT

Role and ResponsibilitiesPassionate about quality and manufacturing excellence? Join our team as a Quality Technician and help ensure our products, processes, and systems meet the highest standards. Collaborate with engineering and operations to drive continuous improvement and deliver outstanding results. Responsibilities Conducted inspections, tests, and measurements to ensure products consistently met quality standards. Identified defects, documented trends, and recommended process improvements that enhanced efficiency and product reliability. Supported root cause analysis and implemented corrective actions, reducing recurring quality issues. Collaborated with cross-functional teams to maintain process compliance and streamline operations. Assisted in developing and maintaining quality systems and documentation, ensuring regulatory and customer standards were met. Monitored product and process performance, driving improvements in yield and consistency. Led continuous improvement initiatives to optimize processes and reduce waste. Ensured adherence to company and customer quality requirements, contributing to high levels of customer satisfaction. Qualifications and Education Requirements Associate or bachelor's degree in engineering, Quality, or related field preferred Hands-on experience in manufacturing or quality inspection Strong attention to detail and problem-solving skills Knowledge of quality standards (ISO, GMP, or similar) is a plus Excellent communication and teamwork skills

The Quality Control Technician II will be responsible for all aspects of the quality programs and functions. These include maintaining all HACCP, food safety records, plant audits, mock recall programs and training the plant on these issues and procedures. Performs testing to validate the microbiological quality of current and new ingredients, suppliers, and packages. Provides test data to assure the production of high quality products. Tests current and new concentrate ingredients in process and finished concentrates, and beverages products in development and finished products. The QC Technician will also work with the R&D Team on new product launches. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Knowledge of all cleaning agents and applications, external, internal, cleaners, and sanitizers. • Properly document and follow all procedures set forth in the frequency guide and standards. • Ability to properly fill out batch reports, calculate variations in batch sizes, proper attributes, standards, and other data required on batch report documented per formula.• Ability to properly measure and follow proper mixing procedures.• Ability to evaluate and troubleshoot batch and make corrections.• Ability to perform all testing, evaluations, and documentation of results while following procedures.• Ability to troubleshoot and take corrective action on the line.• Ability to properly prepare batch tanks for batching, tank rinsing, tank sanitation, odor, and tasting.• Full knowledge and capabilities to perform internal pest control program, location of stations, checking and cleaning of stations, and proper documentation on hand of pest control program.• Assist supervisors in resolving Quality Control issues, tracking quality trends, recommending and implementing plans to improve quality and production efficiency.• Responsible for compliance with Federal and State legislation by establishing and enforcing quality standards; testing materials and product. • Ability to collect, analyze and summarize process quality information and trends. • Computer literacy required with proficiency in Microsoft Office products including Excel and Word. • Typically faces situations that have a variety of interpretations and require careful evaluation. LANGUAGE SKILLS:Ability to read, analyze, and interpret common information, reports and other documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or company representatives. Ability to effectively present information to management. PHYSICAL DEMANDS:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to walk, stand for long periods of time, sit and talk or hear. The employee frequently is required to use hands and fingers, to handle, or feel, sit for long periods of time, stand frequently, bend, squat, reach and turn to access files and office equipment. Must be able to lift up to 50 pounds. WORK ENVIRONMENT:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Field positions will be exposed to various unfamiliar conditions where Personal Protective Equipment (PPE) must be worn and which may include, but are not limited to manufacturing and warehouse plants, and other locations as directed by supervisor. The noise level in the work environment is usually moderate, but increases significantly in warehouse and manufacturing plants. MINIMUM QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • High School Diploma or GED preferred or equivalent experience. • 2-3 years hands-on work experience in the carbonated soft drink industry preferred.• Experience in quality control testing procedures and internal and external sanitation of beverage equipment with a clear understanding of all aspects of blending, product attributes recordkeeping, yields, etc.• Strong computer skills, including Microsoft business applications and various reporting software.• Exceptional interpersonal and verbal communication skills• Understands and can follow all OSHA required training.• Must be 18 years or older• Favorable background and drug exam. • Ability and willingness to work a flexible Full Time schedule that may include weekends and holidays.• Must be able to provide own transportation to various locations in organizational service areas, as required by duties.Shasta Beverages, Inc. provides equal employment opportunities to all applicants for employment without regard to race, color, religion, sex, national origin, age, disability, gender, genetics, gender identity, disabled veterans or sexual orientation.

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office & Onsite At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Champion Safety. Take an active role in prioritizing safety throughout the operation for yourself and others at all times in accordance with MSHA and Vulcan standards. Perform duties safely, responsibly, and proficiently. Oversee Projects. Conduct analysis of customer and job specifications. Assist in new product development. Oversee special, high visibility, or large projects. Train QC Personnel. Train QC department personnel in proper testing procedures within the lab and in the field to optimize team efforts and efficient performance. Conduct Testing. Inspect, sample, and conduct routine and special laboratory testing on construction materials in conformance with appropriate standard test methods. Perform tests to ensure quality of products during production, shipping, and at job sites. Review Test Results. Review, monitor, and maintain the test results of the data and adjust blends when required. Review material quality test results for conformance (per ASTM, AASHTO and appropriate DOT procedures) in order to meet Vulcan's standards for quality products. Communicate test results to supervisors, plant personnel, and plant site QC. Ensure proper documentation of results in the QC database. Prepare Reports. Prepare submittals for the various products. Prepare statistical summary quality reports on VMC Aggregate products. Troubleshoot. Perform troubleshooting of field and jobsite problems. Visually inspect material sources, stockpiles, and truck loads at Aggregate plants. Troubleshoot problem jobs and specifications. Champion Continuous Improvement. Stay abreast of professional and technical developments in order to maintain and improve the skills and knowledge needed for superior job performance and to help improve operational efficiency. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Education. Must have your high school diploma or its equivalent. Associate's or Bachelor's degree is preferred. Experience. Five years of construction materials testing experience in construction materials to include aggregates, asphalt, and ready mix concrete is preferred. Must possess superior working knowledge in at least one product line and have skill in all product lines. Testing Knowledge. Individual must be skilled in basic ASTM, AASHTO, and ADOT testing procedures applicable to our complete product line. Must be knowledgeable in product related specifications and finished products. Interpersonal Skills. Must have strong verbal communications skills for interacting with plant production personnel, plant managers, sales personnel, customers, and agency representatives. Analytical Skills. Skill in general statistical analysis, math, and engineering concepts is preferred. Must be proficient in Microsoft Office Suite, Google Drive, Oracle Business Environment, and other software packages relevant to the position. Time Management Skills. Must have the ability to perform material testing in an orderly, efficient, and accurate manner. Flexibility. Must be willing to work overtime and extended hours depending on customer and company demands. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. Ready to Drive. Must have a valid driver's license. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. We are an industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs, and helping our employees meet their goals, as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters.

Axiom Space is collaborating with Astrolab, Inc. to develop a Lunar Terrain Vehicle (LTV) for future Artemis missions, combining Axiom's advanced AxEMU spacesuit with Astrolab's FLEX rover to enable groundbreaking scientific exploration on the Moon's surface. This partnership reflects Axiom Space's broader mission to build era-defining space infrastructure that drives exploration and fuels a vibrant space economy that will empower our civilization to transcend Earth for the benefit of every human, everywhere. Axiom Space fosters a work environment inclusive of all perspectives. We are the pioneers of commercial space, leading the transformation of low-Earth orbit into a global space marketplace. Our mission-driven team is seeking a bold and dynamic Senior Quality Technician who is fueled by high ownership, execution horsepower, growth mindset, and driven to understand our world, science/technology, and life itself, for the benefit of all on Earth and beyond. Employment in this role is contingent on Astrolab/Axiom being selected as a winner of NASA's LTVS contract. POSITION SUMMARY We are looking for a resilient, high-energy, experienced Senior Quality Control Technician with a good eye for detail. You will be responsible for performing standardized quality control checks on our company products to ensure they meet the required legal and company standards for safety and quality. You may also be required to maintain tool control records, calibrated test & inspection equipment, prepare test data, and identify areas for quality control improvement. Additional responsibilities may require you to operate company vehicles to store and transport materials and products. Lastly, you must be able to perform all tasks as directed by supervisor. KEY DUTIES & RESPONSIBILITIES Developing and maintaining company inspection reports Inspecting goods or products according to quality and safety standards across all stages of production Ensuring company tools and equipment are calibrated and working correctly Reporting quality anomalies to the supervisor Collating test data and drafting quality reports Identifying possible areas for improvement in quality control processes and implement new methods accordingly Comply with safety regulations and maintain clean and orderly work areas Urgently communicate quality, safety, or compliance concerns Communicating project progress, status, and potential issues to stakeholders and leadership Implementing and maintaining agile project management methodologies throughout the project lifecycle Perform additional job duties as assigned QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education & Experience High School diploma or GED Minimum of 10+ years of inspection experience Understanding of advanced mathematical concepts including fractions, ratios, and proportions Track record of delivering outcomes in ambiguous, fast-moving environments Uses good judgement to problem-solve proactively, positively impacting hard challenges Proven to deliver high quality results under tight deadlines Grit Passion for space and the mission Entrepreneurial, growth mindset Perseverance Resourceful, adaptable Skills GD&T experience Experience with Coordinate Measuring Machine (CMM) Advance Experience with Quality Inspection Tools Executes priorities with precision and pace High EQ and ability to collaborate within teams and cross-functionally Tech-savvy in using systems and tools to move faster and smarter Excellent written and verbal communication skills Competencies: Embody our core values of leadership, innovation, and teamwork. In addition, to perform the job successfully, an individual should demonstrate the following competencies: Accountability Sense of Urgency Extreme Ownership Execution and Delivery Efficiency Effectiveness WORK ENVIRONMENT: Generally, an office environment, but can involve inside or outside work depending on the task. Requirements Must be able to complete a U.S. government background investigation. Management has the prerogative to select at any level for which the position is advertised. Proof of U.S. Citizenship or US Permanent Residency is a requirement for this position. Must be willing to work evenings and weekends as needed to meet critical project milestones. Physical Requirements Work may involve sitting or standing for extended periods (90% of the time) May require lifting and carrying up to 25 lbs. (5% of the time) Equipment and Machines Standard office equipment (PC, phone, printer, etc.) Axiom Space is proud to be an equal opportunity employer. Axiom Space does not discriminate on the basis of race, regional color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with disability, or other applicable legally protected characteristics.

The Quality Control Inspector 1 supports the organization in the development, maintenance and execution of a quality control program that will allow the business to continually improve. In addition, the Quality Control Inspector 1 will help ensure that the supply being delivered from vendors and the product being shipped to customers meets the expected standards and specifications. Duties and Responsibilities: Inspect raw materials, machined, welded, and coated parts ordered and received at TEI (TRENDSETTER ENGINEERING, INC) headquarters from vendors and internal machine shop for quality and accuracy. Verify parts received against engineering drawings, specifications, and manufacturing records. Prepare electronic inspection reports for incoming products. Maintain incoming inspection log. Issue, document, and follow up on NCR's. Manage calibrated measuring equipment and certificate log. As necessary, perform other duties, requiring the same level of skill & responsibility. Support any new quality initiatives as required. Be familiar with company HSE (Health, Safety, and Environmental) policies and procedures. Share knowledge & best practice across the company. All other duties as assigned. Qualifications: Associate degree or at least 5 years of previous experience related to quality control inspection, preferably within the oil & gas industry. Advanced skills in dimensional measurement and verification, utilizing all necessary tools. Proficient computer skills and knowledge of Share point and Microsoft 365 required. Ability to demonstrate initiative and assertiveness, plan and organize work in an efficient manner, and work well under stress and time pressures. Strong interpersonal and communications skills, both verbal and written

Powell is a manufacturer of switchgear and other electrical equipment. We are seeking a Quality Inspector for our location in Southeast Houston! Four 10s schedule: Monday-Thursday 6:00am-4:30pm A Quality Inspector is responsible for ensuring that products or services meet established quality standards and specifications. They perform visual, mechanical and electrical inspections, tests, and audits to identify any defects or deviations from quality requirements. Quality Inspectors use various tools and techniques to measure and evaluate the quality of materials, components, and finished products. They document and report any non-conformities and work closely with production teams to address quality issues and implement corrective actions. Additionally, they may participate in the development and improvement of quality control processes and procedures. Essential Responsibilities Learn and be able to perform internal and customer factory acceptance testing to include visual, mechanical and electrical inspections, and testing of all equipment manufactured at Powell facilities according to Powell Standards. Perform tests using equipment such as multimeter, clamp-on-meter, voltage detector, Hi-Pot, etc. Program and operate electronic equipment such as microprocessor-based relays. Energize Powell electrical products and other buyout equipment such as service Panels, HVAC, Battery Chargers, UPS System, etc. Perform equipment failure investigations and root cause analysis. Complete and maintain all test Quality Control documentation as required. Perform maintenance on test equipment as needed. Interaction with all departments (sales, engineering, production control, fabrication, PCR, switchgear, shipping) including customers to work to resolve quality related issues. Interaction with all departments during production, final inspection and final release to shipping is required. External relationships may include regular interaction with other Powell subsidiaries, suppliers and customers. Record Engineering and Shop discrepancies, non-conformities and material shortages utilizing Powell systems. Participates in continuous improvement projects. Promote a safety culture as well as attend all safety meetings. Ensure Powell employees, suppliers and customers adhere to safety rules and PPE requirements. Ensure quality by following standard work instructions and identifying any potential risks to product quality. Ensure that work areas remain clean and well organized. Learn and understand basic electrical principles and relevant Mechanical experience. Minimum Qualifications High School Diploma or General Education Diploma, or a Trade School diploma or certificate Minimum 1-3 years' experience in manufacturing environment. Ability to read engineering documentation and drawings including specification sheets, wiring diagrams, schematics, three-line drawings, wiring lists and part drawings. Preferred Qualifications Experience in Quality inspection for electrical or electronic equipment or components preferred Basic experience working with industry codes and standards and able to refer to applicable codes. Skills, Abilities & Other Requirements Ability to apply industry standards as applicable to job and product. Able to read and interpret electrical symbols, characters, and drawings. Able to apply product knowledge and technical skills to aid in problem solving. Basic computer skills using Oracle, Word, Excel and Access. Develop the ability to answer technical questions from shop, inspectors, and customers. Ability to interact on a regular basis with shop, inspection, engineering, sales and shipping personnel. Actively seeks out self-development through internal or external programs that contributes to knowledge, skill and abilities. Demonstrates integrity and ethical decision making. Conscientious, thorough, accurate, and reliable when performing and completing job tasks. Able to work effectively within a team and around other departments and their activities. Ability to learn and adhere to all manufacturing policies and practices to ensure adherence to ISO requirements. Must be proficient in the English language, both written and verbal. Working & Environmental Conditions Working Conditions Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities. Required to always wear personnel protective equipment (i.e., hard hats, safety glasses, hearing protection, safety harnesses and respirators) when required. Working at a desk and computer in an office environment is required. Must be able to work from all types of ladders (step ladders, "A" frame ladders and all size extension ladders) and scaffolding. Working at heights usually no higher than 30 feet in the air or using proper lift equipment. Physical Requirements Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs. Bending the body at the waist, the legs at the knees, and extending arms and hands in any direction in a repetitive manner continuously. Continuous standing, walking 50-300-foot distances for long periods of time with only occasional sitting. Must be able to climb stairs frequently throughout the shift. Able to frequently look over shoulders, work with both arms above shoulders and use both arms at full length frequently. Using upper extremities to apply or exert a force continuously up to 50lbs. Ability to use hand tools such as tin snips, hammer, and power tools (some vibrating), for long periods of time with frequent repetition. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. *Posted position does not provide visa sponsorship or relocation. #LI-KC1

/OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials according to Internal and Customer requirements. The QC inspector will also be responsible for creating and documenting inspection results, taking measurements, and tracking non-conforming product. ESSENTIAL FUNCTIONS Reports to QC Leadperson and/or Supervisor for daily activities and workload. Perform and document dimensional and visual checks of production parts and incoming goods and creating inspection reports to internal and customer requirement. Responsible for notifying Quality Control Leadperson and/or Supervisor, in addition to Manufacturing and Engineering personnel, of non-conforming goods. Inspect customer supplied material, per specified drawings. Inspecting and gathering product documentation, final document packets, material heat reports as required. Inspection of buy-out materials. Make First Article inspection and document inspection results. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminating waste. Maintain 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Leadperson or QC Supervisor. Other Requirements An annual vision examination is required. Must have experience with the use of measuring instruments in the completion of dimensional inspections. (Calipers, micrometers, CMM, Pi tapes, Optical comparators, etc.) Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials and manufactured products. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 2-3 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.