Quality technician jobs in Idaho - 120 jobs

The Quality Care Coordinator supports Kootenai Health's quality and value-based care initiatives by tracking and following up on patient care to ensure comprehensive, high-quality outcomes. This role identifies and addresses care gaps using a variety of tools and resources, facilitating timely follow-up and coordination of care. The coordinator works collaboratively with clinical staff to promote awareness, engagement, and success in meeting Kootenai Health's quality metrics and initiatives, under the direction of quality leadership. Additional responsibilities include abstracting patient records and maintaining accurate documentation to support continuous improvement efforts. Responsibilities * Collaborates with Kootenai Health departments including clinical departments, IT and revenue cycle as needed to advance initiatives and achieve established goals * Collaborates with external entities such as commercial payers, Kootenai Care Network, and government agencies as needed to advance initiatives and achieve established goals * Maintains general knowledge of assigned quality and value-based care initiatives and serves as a liaison to clinic staff * Utilizes a variety of electronic tools to gather patient data and monitor patient population (i.e., Microsoft Office tools, Electronic Health Records, Population Health systems, commercial payer and government agency portals) * Evaluates individual patient status against established care criteria to identify adherence/gap in established care criteria * Collaborates with stakeholders to facilitate follow-up for identified gaps in care * Abstracts patient records with a high degree of accuracy and efficiency * Supports improvement activities * Recognizes data inconsistencies and reports them for resolution * Relies on experience and judgment to plan and accomplish goals * Regular and predictable attendance is an essential job function * Performs other related duties as assigned * Competent to meet age-specific needs of the unit assigned * Requirements and Minimum Qualifications * Associate's degree in a related healthcare field required; healthcare certificate may be accepted in lieu of degree (i.e. CNA, CMA, LPN or other similar certification) * 2 years' experience in a health care setting required Working Conditions * Must be able to maintain a sitting position * Typical equipment used in an office job * Repetitive movements About Kootenai Health Kootenai Health is a highly esteemed healthcare organization serving patients throughout northern Idaho and the Inland Northwest. We have been recognized with many accolades and distinctions, including being a Gallup Great Workplace, No. 1 Best Place to Work in Large Healthcare Organizations, and Magnet Status for Nursing Excellence. We pride ourselves on our outstanding reputation as an employer and a healthcare provider. As your next employer, we are excited to offer you: * Kootenai Health offers comprehensive medical plan options, including options for fully paid employer premiums for our full-time employees. For part-time employees, we offer the same plan options with affordable part-time premiums. In addition to medical insurance, we offer many voluntary benefits ranging from dental and vision to life and pet insurance. Kootenai Health also offers well-being resources and telemedicine service options to all employees, regardless of benefit eligibility. Benefits begin on the 1st of the month following 30 days of employment. * Kootenai Health's tuition assistance program is available after 90 days. If you want to further your education, we'll help you pay for it * Kootenai Health sponsors retirement plans for employees that enable you to save money on a pre-tax and Roth after tax basis for your retirement. Kootenai Health will match your contributions based on years of service ranging from 3-6 percent. * Competitive salaries with night, weekend, and PRN shift differentials * An award-winning and incentive-driven wellness program. Including a MyHealth corporate team, onsite financial seminars, and coaching * Employees receive discounts at The Wellness Bar, PEAK Fitness, various cell phone carriers, and more * Employee referral program that pays you for helping great people join the team * And much more Kootenai Health provides exceptional support for extraordinary careers. If you want to work on a high-quality, person-centered healthcare team, we can't wait to meet you! Apply today! Kootenai Health complies with applicable federal civil rights laws and does not discriminate on the basis of race, color, national origin, age, disability, veteran status, or sex. Kootenai Health does not exclude people or treat them differently because of race, color, national origin, age, disability, veteran status, or sex.

QA Lab Technician A-Crew: Days 7pm to 7am Sun, Mon, Tues, and every other Wed. Conduct all products testing of assigned attributes as presently setup by the product specifications and testing frequency schedules. Enter all lab analysis of data. Essential Duties and Responsibilities * Perform all work functions in a safe manner as defined in the lab safety manual and in safety meetings. * Provide accurate, reproducible and timely data on test results and data entry. * Notify the Technical Services Manager and/or Lab Team Leader of reoccurring or serious out of specification conditions. * Support the Quality Improvement Process through active participation. Support the 5S process through active participation. * Assist and promote a positive work atmosphere among coworkers. * Adhere and comply with all company standards and policies. * Maintain the work area neat and orderly. * Perform 2 Safe surveys per month. * Assist in the training of new lab personnel. * Provide 1st aid treatment. * Assist lab Team Leader in helping new trainees in acquiring a testing lab routine, be able to do multitasking and other training as needed. All employees are responsible for upholding the principles of SQF 2000 All employees are responsible for immediately reporting any food safety, food quality or plant security issues to management for appropriate action. A trained designee will be appointed by management to cover for absences and vacancies. Must maintain the highest standards of ethics and integrity while embodying the tenets of "What We Stand For" and "The Basic Principles." Must maintain the highest standards of data management by creating consistent, reliable data which will ensure accuracy and in turn, maximize the use of data and confidence in decision making. Proactively manage safety by ensuring compliance with all Federal and State regulations and internal Company policies. Regularly complete behavior based safety observations. Ensure unsafe conditions are corrected in a timely manner. Other duties may be assigned. Supervisory Responsibilities This job has no supervisory responsibilities. Qualifications To perform this job successfully, an individual must be able to meet the following qualifications. Education and/or Experience Possess good math skills, i.e., add, subtract, multiply, divide, average, compute ranges, and determine high and low answers. Understand basic skills and ability to use a computer. Become a "Certified Laboratory Technician". Have first aid skills as provided by the company. Be able to work and handle chemicals with an awareness of safety. Be able to read and manipulate basic laboratory equipment. Language Skills Be able to effectively read, write and speak English. Be able to speak clearly on the telephone including handling emergencies and crisis calls. Be able to give meaningful oral instruction and/or discussion in a group situation. Be able to give meaningful and legible written instruction. Be able to lead, direct, and instruct groups in various types of training. Be able to express ones self while under pressure. Reasoning Ability Be able to reason a situation and make sound decisions. Be able to make decision based on facts rather than emotions. Be able to analyze a situation and react accordingly. Be able to recognize out of specification conditions. Be able to recognize deficiencies during inspections. Be able to deal with problem solving situations involving several variables. Physical Demands Be able to work under stress. Be able to do plant testing, which require going up and down stairs, platforms, and various types of equipment. Wear protective equipment as needed. Come to work clean and dressed in appropriate work clothes. Be able to lift at least 25 lbs. Average physical abilities in eyesight, taste, and smell. Work Environment While performing the necessary job duties listed above the following conditions constitute the work environment. Be able to safely work around hazardous chemicals such as acids, bases, and flammables. Be able to work around moving equipment, loud noises, etc. without adverse effects. Be able to work around and understand Technical Equipment. Who We Are We are a family-owned, family-friendly company that empowers and supports our employees. We live out our company values and expect all team members to do the same. We are proud of our 85-year history and credit our success to our startup mentality and strategic focus on providing tasty and innovative products to kitchens, cafeterias, and dining rooms throughout America. Our supportive and collaborative culture is driven by our mission - to make mealtime victories happen every single day. At BAF, we are an equal opportunity employer. We value diversity and strive to create a supportive and inclusive community of individuals committed to helping each other and our company thrive.

Job Title: Quality Control Canning Technician Department: Canning Department Reports To: Canning Supervisor FLSA Status: Non-Exempt Prepared By: Canning Business Unit Manager Salary Level: 6A C SUMMARY This position is responsible to ensure product compliance with all Critical Control Points and Preventative Controls for the production of Low Acid Canned Foods (LACF) (21CFR113). Completes quality checks for Canning activities to assure that WIPs (work-in-process) and finished products meet specified requirements. Assesses manufacturing and equipment conditions to assure they meet specified requirements. Provision for coverage of these responsibilities during an absence includes substitution by Canning Op 1, QFS Canning Coordinator, or similar trained and qualified personnel. ESSENTIAL DUTIES AND RESPONSIBILITIES may include the following. Other duties may be assigned. Conducts monitoring tests on WIPs and/or finished products: weight, viscosity, pH, brix, moisture, strained weight, vacuums, etc. Evaluates flavor, texture and odor of soups, sauces and finished products. Monitors physical and numerical values on equipment such as temperature, time, pressure, metal rejection, etc. Inspects and evaluates packaging including can seams, label placement, lid tightness, line clearance between products, etc. Reviews and verifies canning paperwork and monitoring tests are completed in an accurate and timely manner with appropriate response to out of specification events Immediately reports out-of-spec materials and operating conditions to the Manufacturing and QFS Supervisors. Assists with solutions to problems encountered with products and procedures. Immediately track and report (place on Hold) product when raw materials, WIPs, or finished product do not meet requirements. Monitors Good Manufacturing Practices of all individuals in the plant and warehouse. Advises infractions to supervisor. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Preferred: Previous experience with food products SKILLS Detail oriented Works well with others Basic math skills Bilingual Spanish/English Reliable/Dependable LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to understand and utilize a 24-hour clock. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS Successful completion of Better Process Control School certification Canning Technician will require special training on can seam analysis PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit. The employee is occasionally required to stand; walk; use hands to finger, handle, or feel; talk or hear; and taste or smell. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, and color vision. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions and moving mechanical parts. The noise level in the work environment is usually loud.

Job DescriptionDescription: Van Compass manufacturers aftermarket suspension and armor for Mercedes Sprinters, Ford Transit and Ram Promasters. We are looking for an experienced Production Tech to help us weld, laser cut and form parts on press brake. DUTIES: Read and complete work orders as assigned by the shop foreman. Production welding of product runs, from low to high quantity run sizes. MIG welding of steel sheet metal parts Possible TIG welding of Aluminum parts if you are capable Potential to run in house laser cutter. Load sheets, build cutting nest, un-nest parts. Potential to run in house press brake. Follows instructions and coaching of shop foreman and engineering department to ensure quality meets Van Compass brand standards. Ensure consistent quality of work across production runs. Ensure work in process is kept in an organized, orderly fashion. Deburr and final inspection of product. Move weldments internally between the production area and powder coat area Report quantity completed to shop foreman. Notify foreman of issues with equipment or materials. Requirements: In office 7-5:30, 30 minute lunch, Mon-Thurs, Rathdrum, ID Proficient in MIG welding steel Proficient with shop tools: grinders, buffers, hand tools Able to lift 50 lbs Able to produce consistent quality at a repeatable pace. TIG welding a plus $20-32/hr pay

The Manufacturing Quality Technician is accountable for protecting our customers by ensuring only compliant materials enter and exit the plant. This role combines comprehensive inspection and testing of incoming raw materials, in-process components, and finished composite decking products with data-driven analysis to prevent defects and drive continuous improvement. Responsibilities include auditing quality processes, maintaining documentation and calibrations, and communicating issues to support timely resolution. By identifying process improvement opportunities and collaborating cross-functionally, the technician helps ensure product reliability, operational efficiency, and customer satisfaction. 12.5 hour shifts available; A shift; Sunday, Monday, Tuesday, every other Saturday 6:30am to 7:00pm C shift Wednesday, Thursday, Friday, every other Saturday 6:30am to 7:00pm Starting Wage DOE and Qualification is $24.00 per hour Key Responsibilities: Technical Knowledge The individual in this role must have a thorough understanding of quality control including: * Measurement and test equipment use and calibrations including hand tools, gauges, optical tools, balances, color meters, and force measuring instruments. * Accurate data entry and analysis methods. * Quality management system compliance. * Process improvement and problem-solving approaches. * Area management and housekeeping best practices. * Risk assessment reasoning. * Nonconforming materials and rework handling. * Sampling plans and proper sample preparation. * Inspection techniques and processes. * Auditing. Core Skills The individual in this role must demonstrate mastery in the following areas: * Writing Skills: Write clear, simple sentences, complete technical forms, and apply basic math concepts like estimation and spatial reasoning. * Reading Skills: Interpret manuals, safety instructions, reports, and understand images, graphs, and coding systems in the work area. * Oral Skills: Communicate effectively, respond to questions, and collaborate with supervisors and team members to support plant improvements. * Motivation: Take responsibility for assignments, improve skills, and set personal goals with actionable strategies. * Integrity: Be honest with company property and time, communicate respectfully, and resolve conflicts constructively. * Reliability: Maintain punctuality, stay composed in stressful situations, and work effectively in a structured environment. Arrive fit for duty each shift.

Raycap, Inc., a manufacturing company in Post Falls, is seeking a highly motivated Quality Inspector for our swing shift. In this role, the Quality Inspector inspects components, sub-assemblies, and finished products received and/or built internally. This position works with Quality Management to implement the proper sampling plans based on component specifications, inspection plans, or customer supplied requirements and to provide guidance on required quality tools, methods, and data to assure that shipped product fulfills all customer specifications and quality requirements. This position monitors and maintains Raycap quality processes to assure continual 100% customer satisfaction. Swing Shift: Monday - Thursday (3:30pm - 2am) with overtime as required. Primary Job Responsibilities Collects quality data as required to derive quality objectives Executes and maintains comprehensive quality product inspections Serves as a manufacturing focal point for intelligent analysis of quality issues determining true root causes and implementation of permanent corrective and preventive actions Follows and promotes the use of and implementation of internal quality standards and procedures Reviews documentation for compliance to quality standards Inspects First Articles, incoming components, raw materials, fabricated parts, and in-process assemblies and subassemblies products per Inspection Plans and Specification Requirements Conducts subassembly tests as required to ensure quality products Uses measuring equipment such as calipers and gauges Audits and monitors quality requirements in accordance with the company quality assurance policies and customer specifications Documents and reports inspection findings, results and monitors corrective actions to inspection findings Regular adherence to performance of applicable procedures in the ISO 9001 Quality Management Systems (QMS), ISO 14001 Environmental Management Systems (EMS), and ISO 45001 Occupational Health & Safety Management Systems (OH&S MS); ensuring processes remain sustainable, suitable and effective in relation to position Continuous assessment of opportunities for improvement and any needed changes to management systems Assists with assembly work, when able Qualifications Hands-on quality and manufacturing experience in an ISO certified environment. Proficient in MS Office, Access, Outlook and Adobe programs Experience with Document Control software Familiarity with SAP, ISO-9001, knowledge and application of DFx, FMEA or similar Quality Systems is a plus Physical Demands The employee is frequently required to stand, walk; use hands to operate basic tools, keyboards or controls; reach with hands and arms The employee must occasionally lift and/or move up to 50 pounds Who We Are Raycap, Inc. creates products that protect and support the world's most valuable assets. We support advanced solutions for telecommunications, renewable energy, transportation, defense, and other applications worldwide. We offer A competitive benefit package Paid Time Off from day one 10 annual company paid holidays A Tuition Reimbursement program A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, gender identity, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

Job Description We are looking for a QLC, if you are passionate in providing quality, meaningful activities for the elderly we look forward to meet you! We are looking for a part-time 'Quality of Life Coordinator' (Activity Coordinator) This person must be compassionate, friendly, outgoing, and have passion for seniors. We believe that a great activity program increases the quality of life of the residents we care for each day and are looking for someone who feels the same. Are you self-driven and can you work well in a team setting? You may be the person we are looking for! The Cottages provides care for our senior population to help them live safely and independently in a home-like setting. We only want people who want to love on our seniors. Experience is a plus, but love is a must! Qualities: Care and compassion Reliability Dependability Maturity Agility Sincerity Timeliness Trustworthiness Integrity Job Duties Include (not limited to): Creating a fun environment for our residents Plan activities in the home and in the community Create monthly activity calendars Create personalized and group activities for all residents Oversee activity petty cash Coordinate external vendors for entertainment Help coordinate and plan special events Requirements: GREAT ATTITUDE, one of compassion and a sincere desire to help others Ability to take direction, follow rules exactly, be proactive and thoughtful Successful completion of a Criminal History check Pass the post-offer drug test Be able to lift at least 50lbs Be 17 years of age or older *We are a drug free and equal opportunity employer. Employment offers are contingent upon successful completion of reference checks, drug and background screenings.*

is for our swing shift. GENERAL RESPONSIBILITIES: The Quality Assurance Technician is responsible for monitoring and documenting that the GMP's, HACCP, Finished product Specification, Process Sheets and/or SOP's are followed during process to achieve a good quality on the products. This position requires knowledge of standard operating procedures (SOP's), GMP's, normal operating procedures, and food safety (HACCP). SPECIFIC RESPONSIBILITIES: Preoperative inspections of Equipment and Facility Monitoring and Record keeping of Inspection ATP Swabs Operational Inspections- Facility Housekeeping Employee Practices Cleanliness of Equipment Tools and Utensils Monitoring and Record keeping of inspection Boot Foamers Inspection Response to Foreign Material Incidents Product Hold/Segregation/Release Product Sampling/Microbiological Testing Thermometers Calibration Scales calibration Internal Plant Audits Cutting room Inspection is performed to make sure that all incoming raw chicken breasts and dark meat are received in good condition and meet the raw material specifications for condition, temperature, bones, skin, veins and hard cartilage connective tissue. Ensure all refrigerated meat and poultry raw materials are handled in a safe manner and that required temperatures of product and room are maintained during the cutting and marinating process. Fry Line Ensure that all previously breaded, battered and baked meat and poultry products are cooked and/or cut at the required times and temperatures to achieve the minimum internal temperature/specification requirements. Ensure the control of the physical aspects of the product such as sizing, uniformity, defects, batter pickup, flavor and odor. One or two pounds are weighed from each sample and product is graded as required for selected customer with results recorded in Processing and Finished Product grade sheet. Packaging room: Ensure the documented control of the cooling/freezing and packaging process so that previously Fully Cooked Products are cooled/frozen at the required times and temperatures to inhibit the growth of microorganism and preserve the product prior to packaging. Ensure the elements pertaining to the monitoring and verification of metal detectors are in place so that all finished products are packaged in a safe manner to protect the consumer from potentially harmful metal objects. Execute other duties as assigned in all areas. Desired Background/Experience: Good communication skills, must read and write English, math and computer skills, detail orientated and positive attitude. High School diploma or equivalent. Benefits BandD Foods offers a competitive salary and comprehensive benefits package including, Health, Vision, and Dental insurance, 401K savings plan with employer match.. BandD Foods is an Equal Opportunity Employer and we seek to create an inclusive workplace that embraces diverse backgrounds, life experiences and perspectives.

At Actus Nutrition, our focus is to create high-quality ingredients designed to optimize health and nutrition. We are passionate and dedicated people. Each day, we collectively explore new, innovative ways to enhance product performance and value through our broad human and animal nutrition portfolios. We offer a comprehensive benefits package which includes medical, dental, vision and life insurance as well as a healthy 401(k) company match program. The Quality Technician has the responsibility for performing departmental analytical and clerical work in support of the plant Quality function which includes conducting lab tests, preparing samples for shipment, and responding to internal calls. Pay: $22.00/hr Shift: 6:00PM-2:00AM - Monday - Friday ESSENTIAL DUTIES and RESPONSIBILITIES: Conduct and interpret lab tests. Package and prepare samples for shipment to third party testing locations. Respond to internal calls to answer technical product questions. Perform laboratory computations leading to accurate data reporting. Troubleshoot lab issues. Conduct routine maintenance on all lab equipment. Contact lab supply vendors. Assist inventory control process. Ensure all laboratory chemical MSDSs are reviewed and filed. Read and properly interpret documents such as lab results, GMP manuals, HACCP programs and procedure manuals. Solve practical problems and comfortably deal in high pressure situations. Possess the ability to interpret a variety of instructions furnished in written and oral forms. Complete routine clerical work such as filing, checking and entering required information into the computer system. Follow plant and laboratory GMPs to maintain a clean work area. Advise operations associates to assure GMPs are followed in the plant. Perform environmental and product testing and communicate results to the plant and corporate management groups as needed. Send timely “Out of Specification” (OOS) notices as needed to internal and appropriate corporate management. QUALIFICATIONS: Previous laboratory experience, preferably in a food grade manufacturing facility. Strong knowledge of laboratory testing procedures and computer software applications. Exceptional analytical and organizational skills. Strong interpersonal and communication skills.

Inspects and oversees all production line inspections of all finished goods manufactured in the production area. Duties and Responsibilities: Review the Batch Ticket Checklist for the following: Clearing area of previous job materials; correct packing materials on the floor for the job; encoding devices are set correctly for lot code and/or expiration date; set-up fill weights are in spec; label height is correct and signed-off label placement standard is nearby; all retain samples have been collected and taken to the Q.C. lab. Check the Batch Ticket Bill of Materials/Component Sheet to be sure all parts are accounted for and that they are correct. This includes comparing Item Numbers and Item Description to carton labeling and the individual packaging components. Check the filling equipment cleaning log to be sure it was updated when the last product was removed and cleaned. Inspect at the first finished goods produced to be sure they look perfect. If the finished goods represent an item that we have not produced before it needs to be approved. Q.C. Inspection Records. All out of specification results or defects should be circled and adequate notes of all follow-up action noted in the Job History Notes. Q.C. Inspections should be completed four times an hour of run time. Run time includes additional packing, lot coding or labeling operations completed after off -line filling operations. Look at finished goods for any/all defects as noted on the A.C. Inspection Records. Report any/all problems to the Shift Lead immediately. If there is a problem, ask the Machine Operator and/or Line Coordinator to stop the process immediately so the problem can be evaluated and corrected. This also prevents unnecessary or excessive rework. Follow-up on defect problems by examining finished foods to be sure the problem has truly been corrected. Must be able to perform the essential job functions with or without reasonable accommodation without posing a direct threat to the individual or others. Always maintain a safe and clean work environment. Additional Responsibilities: Performs clerical tasks in the laboratories. Performs assigned tasks in the Production area. Performs other duties as assigned or needed. Read and understand English paperwork. Write and communicate in English. Elevation Labs provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Elevation Labs complies with applicable state and local laws governing nondiscrimination in employment at every location in which the Company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. The essential duties listed are representative of the major duties required of this job; ability to perform the essential functions with or without reasonable accommodation is required. Elevation Labs may make reasonable accommodation to the known physical or mental limitation of otherwise-qualified individuals with disabilities unless the accommodation would impose an undue hardship on the operation of our business. This job description is not designed or intended to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required for this job. Specific duties and responsibilities may vary based upon departmental needs. Incumbent may be asked to perform other duties as assigned. Knowledge & Skills: Perform quick and accurate count verifications. Perform basic mathematical calculations (addition, subtraction, multiplication, division, percentages). Perform work using good organizational skills and attention to detail. Write legibly. Communicate by written and/or verbally the nature of discrepancies and defects of the inspected materials. Basic knowledge of personal computers. Work with minimum supervision. Perform tasks requiring manual dexterity and use of tools and/or machines (pallet jack, tape gun, hand tools). Perform essential duties and responsibilities efficiently, accurately, and safely. Education/Experience: High school diploma or equivalent. Ability to read, write, and speak English Experience with Pallet Jacks, tape guns, tape machines, heat guns, labelers. Previous experience with Liquid filling Machines, cappers, conveyors, lot coders & shrink tunnels preferred. Physical/Mental Demands: Regularly/Frequently required to sit, stand, walk, stoop, kneel, bend. Regularly/Frequently use hands to keyboard or type, handle materials, or manipulate tools. Regularly reach with hands and arms. Climb stairs. Occasionally/Frequently lift and/or move up to 50 pounds. Specific vision abilities required by this classification include close vision, depth perception and ability to adjust focus. Sufficient clarity of speech and hearing abilities required by this classification includes those which permit the employee to discern verbal instructions and communicate effectively in person and by telephone. Requires composure and ability to prioritize and manage many urgent tasks and requests simultaneously with a high-level of competence and accuracy. Maintain confidentiality. The physical demands identified above are representative of those that will be required to successfully perform the essential functions of this job. Work Environment: Regularly required to work in areas where chemical materials are encountered. Manufacturing setting with moving machinery. Regularly required to wear appropriate personal protective equipment. May involve exposure to shop environment including variable noise levels. Must customarily have a high consciousness for personnel and equipment safety.

Temp The Quality Control Technician will be primarily responsible for ensuring compliance with cGMP's, raw material and component receiving, releasing outbound finished goods, maintaining the Environmental Monitoring Program, and keeping quality records organized and neat.

Job Description About Our Partner: Our partner is a high-capacity frozen potato processing facility specializing in the production of frozen French fry products. The operation is driven by a strong commitment to food safety, product consistency, and regulatory compliance. Located in Idaho, the plant plays a critical role in delivering high-quality frozen potato products to customers nationwide while maintaining strict USDA, FDA, and HACCP standards. What Our Partner Offers: Comprehensive Benefits: Competitive salary, medical, dental, and vision insurance, paid time off and holidays, and a 401(k) with company match. Stable Manufacturing Environment: Join a well-established frozen food operation with consistent production demand and long-term stability. Quality-Focused Culture: Work in an environment where food safety, product integrity, and continuous improvement are core priorities. Hands-On Impact: Play a key role in ensuring product quality and food safety from raw potatoes through finished frozen French fry products. How You'll Contribute to Our Partner's Success: As the Quality Control Technician, you will be responsible for monitoring, testing, and verifying product quality throughout the manufacturing process. You will support food safety systems, ensure compliance with regulatory and customer requirements, and work closely with production teams to identify and resolve quality issues. Your role will directly impact product consistency, safety, and customer satisfaction. Key Responsibilities: Conduct routine quality checks on raw materials, in-process products, and finished frozen French fries Monitor Critical Control Points (CCPs) in accordance with HACCP plans Perform sensory evaluations including color, texture, taste, odor, and appearance Verify product specifications such as cut size, moisture, oil content, and defect levels Collect, retain, and document samples for laboratory testing Calibrate and verify accuracy of quality testing equipment (thermometers, scales, metal detectors, etc.) Inspect packaging for correct labeling, coding, seals, and case integrity Monitor sanitation practices and GMP compliance in production and packaging areas Identify and report non-conforming products and assist with corrective and preventive actions Complete quality records, logs, and reports accurately and in a timely manner Communicate quality concerns to production supervisors and QA management Participate in internal audits, customer audits, and regulatory inspections Support continuous improvement initiatives related to quality and food safety Follow all food safety, workplace safety, and company policies Qualifications: High school diploma or GED required; associate degree in Food Science or related field preferred 2-5 years of quality control or food manufacturing experience (frozen foods or potato processing preferred) Working knowledge of HACCP, GMPs, food safety, and sanitation standards Ability to read and interpret product specifications and quality standards Strong attention to detail with accurate documentation skills Familiarity with Microsoft Excel, Word, and QA systems

Summary: Tests and inspects products at various stages of production process to ensure products compile and maintain a consistent quality. Essential Duties and Responsibilities: General Food Safety Understands, follows and enforces all established Safety, Health, Food Defense, Food Safety, GFSI, SQF, FSMA, current GMP and Company policies, procedures and recognized practices. Follow all GLPs (Good Laboratory Practices) and GMPs (Good Manufacturing Practices), including using appropriate tools (gloves, safety glasses, chemical aprons, etc.) to ensure chemicals and tests are handled and conducted appropriately and to ensure cross-contamination does not occur. Ensures that product quality is an absolute priority. Product and Ingredient Testing: Conduct quality control of raw materials, work in progress, and finished products to ensure that results meet specified requirements. Check the quality of samples to ensure the color, flavor, salt, moisture, pH and acidity, etc. is consistent and that the product is free from discrepancies (lumps, specks, etc.). Become proficient in all analytical procedures including, but not limited to, electric and manual titration, moisture and fat analysis, water activity, sieve, angle of repose, colorimeter. Perform all analytical tests including: CEM fat and moisture analysis, Denver Instrument and microwave, pH, titratable acidity, salt, sodium, free fatty acid, cheese solubility test, capsicum heat test, ash and water activity. Perform all Physical tests including: color by Hunter, Viscosity by Brookfield and Bostwick Consistometer and Bulk Density. Clean, maintain, and calibrate laboratory equipment including scales, titrators, microwaves, stoves, etc. Pull samples sanitarily for line tests, micro tests, retains, etc. and ensure retain library is up to date. Stock and maintain an organized and clean environment in the labs to prevent contamination to the tests. Conduct product cook-ups, color and flavor checks, sieve analysis, microwave oven moisture. Record Keeping and Production Compliance: Check product labels to ensure product/lot/batch numbers are correct and the packaging is clean and free from defects. Maintain accurate records of product specification test results on both the company's ERP system and by written documentation. Assist supervisor in placing holds on products that are out of specification and track items in the ERP. Conduct scale weight checks in plant. Accurately weigh small amounts of ingredients for production. Knowledge/Experience/Skills: Self-motivated and ability to work with little supervision Must be dependable and trustworthy Detail oriented, accurate and excellent record keeping skills Strategic thinker with good judgment, decisiveness, and interpersonal skills General computer knowledge

Location: 255 N Steelhead Way, Boise, ID 83704Hire type: Full-TimeShift: 1st ShiftPay Range: $20 - $22 /hr Schedule: Monday to Friday Ability to commute/relocate: Boise, ID 83704: Reliably commute or planning to relocate before starting work (Required) JOB description Position Summary: The QA Inspector is responsible for inspecting parts, manufactured both internally and externally and providing information relative to the compliance of the parts relative to released documentation. This position will also include Final Weapons inspection as well as lasering of finished parts. PWS has a vast portfolio of weapons systems in production as well as in development. Candidates need to have understanding of basic weapons function and be willingness to learn internal process that we use. Essential Duties and Responsibilities: Inspect parts daily using appropriate measurement devices Maintain Quality Assurance paperwork Work with shop/vendor to resolve parts issues Maintain clean workspace with some shared tools Competencies: To perform the job successfully, an individual should demonstrate the following: Communications - Exhibits good listening and comprehension. Expresses ideas and thoughts in written form. Expresses ideas and thoughts verbally. Keeps others adequately informed. Selects and uses appropriate communication methods. Verbal communication skills are paramount. Must be able to deal with different personalities while effectively communicating the discrepancy to the team. Customer Service - Displays courtesy and sensitivity. Manages difficult or emotional customer situations. Meets commitments. Responds promptly to customer needs. Solicits customer feedback to improve service. Dependability - Commits to doing the best job possible. Follows instruction. Keeps commitments. Meets attendance and punctuality guidelines. Responds to requests for service and assistance. Takes responsibility for own actions. Planning & Organization - Integrates changes smoothly. Plans for additional resources. Prioritizes and plans work activities. Sets goals and objectives. Uses time efficiently. Works in an organized manner. Must be detail oriented. Quality - Fosters quality focus in others. Improves processes. Measures key outcomes. Sets clear quality requirements. Solicits and applies customer feedback. Use of Technology - Adapts to new technologies. Demonstrates required skills. Keeps technical skills up to date. Troubleshoots technological problems. Uses technology to increase productivity. Flexibility - The ability to quickly adapt to new challenges that arise in a manufacturing environment. Ability to work with people on a team Lean Manufacturing - Exercises a commitment to driving value and eliminating waste. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: Education/Experience: Degree from academic or trade school preferred but not required. Should have experience with GD&T, MCOSMOS, MeasurLink 8 and above. Experience using and setting ring gages, using thread wires, and knowledge of thread classes. Experience using different types of dial gages, basic hand tool measurement equipment including measuring coating thickness. Experience using Mahr and Mitutoyo equipment. Knowledge of basic calibration schedule and requirements. Prior machine shop experience. Language Ability: Read, analyze and interpret typical manufacturing documents. Ability to read and interpret technical drawings as well as identify non-conformances on physical parts. Effectively present information and respond to questions from managers. Mathematical Ability: Must be able to conduct many types of mathematical problems including the ability to calculate figures and amounts such as proportions, percentages, area, circumference and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Critical Thinking/Problem Solving a must. Integrity is a high priority in this department of PWS. Computer Skills: To perform this job successfully, individuals must have basic computer related skills including familiarization with word processing, spreadsheet, and MRP/ERP software. Certificates and Licenses: Lean/Six Sigma and QA certification desirable but not required. Past machining experience a plus. Supervisory Responsibilities: none required Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit. The employee is frequently required to talk or hear. The employee is occasionally required to stand; walk; use hands to finger, handle, or feel and reach with hands and arms. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications other: Cannot have Felony conviction-weapons will be handled daily throughout the facility. Job will start immediately upon hire. Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance

Job Type:Regular Invest in you, Join Agropur. We dairy you! What Agropur invests in YOU: Starting wage of $21.33 Two pay increases within the first year up to $1.00 $1.50 Shift Differential + Double Time on Sundays Competitive and comprehensive compensation and benefits package focusing on your physical, financial, and emotional health to include the following perks as well as the standard benefit offerings: Medical, Dental, Vision, Life, Short and Long-term Disability Insurance 401(k) with up to a 7% company match 3 Weeks PTO Paid holidays and 2 floating holidays Advancement Opportunities Healthy work/life balance What this role is all about: We are looking for a Quality Control Technician in Jerome, ID. The Quality Control Technician I is responsible for conducting quality control tests to ensure that materials and products meet established standards. The role involves performing routine tests on raw materials, in-process, and finished products, as well as maintaining accurate records of testing data. The QC Technician I works closely with production and other departments to resolve quality issues, ensuring product food safety, quality, and compliance with both internal and external standards. Perform various testing procedures on raw materials, in-process products, and finished products, including microbiological and chemical tests. Monitor quality parameters, ensuring that they align with production standards and regulatory requirements (may include document review). Record and communicate data from tests, identifying trends and discrepancies. Collect samples for testing and prepare them according to established protocols. Ensure facility equipment is in proper calibration and maintained to comply with Good Laboratory GLP and Standard Operating Procedures and Instructions (SOP/OPI). What you need: High School Diploma or equivalent required Associate's Degree in Science, Food Science or Chemistry field preferred. Equivalent combination of education and/or experience may be considered. No experience required; on the job training provided. Where you'll be working: Our Jerome, ID, plant is home to approximately 400 employees and processes approximately 7 million pounds of milk per day. This facility produces various types of cheeses, such as; mozzarella, cheddar, provolone, muenster, parmesan, romano, Monterey jack, gouda, and asiago. They also run various whey streams, such as; deproteinized whey, sweet dairy whey, GMP, permeate, instantized, and our top-rated BiPro products. Agropur's US operations produce approximately 1 billion pounds of quality, award winning cheese each year. The US operations produce more than 20 different cheese varieties along with whey protein and dry ingredients. AA/EEO - Minority/Female/Disability/Veteran/Sexual Orientation/Gender Identity Agropur welcomes people from all backgrounds and origins. We are proud to be an employer with a diverse community and are committed to providing a respectful and inclusive experience for all employees and applicants. We will work with candidates who request accommodation. Please note that an adequate knowledge of French is required for positions in Quebec. In this text, the use of the masculine gender to designate persons is intended only to lighten the text.

Full-time Description WORKING FOR WASCO: It's more than just building the best pressure sensors on the market. At Wasco we have “team members" and not employees. When you are part of a team, it's important to know not only what you are working towards but also what you are working for. An employee has a job and works for a boss. A team member has a role and works towards a purpose. if you can't laugh at yourself or you can't stand tri-tip, potlucks, and donuts, you probably don't need to apply. OBJECTIVE: The Assembly Technician builds assemblies efficiently and effectively to the highest quality standard that meets or exceeds our customers' expectations. JOB DUTIES: Understand and demonstrate Wasco Core Values. Follow all MWI/Shop Aid/Verbal instructions. Understand Work Orders and verify kit quantities. Perform quality assurance on any Assembly Dept process. Monitor the functioning of all equipment, notify the Specialist/Supervisor of any issues. Perform approved Preventative Maintenance, as needed. Maintain a clean, safe, and orderly work area. Available to work extra hours, as needed. Perform additional duties, as assigned. Requirements EDUCATION: High School Diploma, GED, or equivalent. EXPERIENCE: No experience required. PHYSICAL REQUIREMENTS: Ability to lift 50 lbs. at chest level several times a day. Good hand and eye coordination with manual dexterity and fine motor skills. Ability to see the full spectrum of colors and track fine details visually to discover defects in parts or processes. SKILLS & ABILITIES: Time management Strong communication skills English proficiency (read, write, speak, understand) Attention to detail Manual dexterity Adequate visual acuity (with or without corrective lenses) Team collaboration Occasional travel may be required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. *Wasco is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, or any other status protected under federal, state, or local law.* Salary Description $16 - 18 / hour

Job Description Boise Cascade Homedale has an exciting opening for a Quality Control Technician on Swing Shift. Responsibilities: The Quality Control Technician position requires a high level of self-motivation, accountability, and responsibility. This position will work swing shift (4:00 p.m. - 2:30 a.m.) following a training period. Daily tasks may include raw material evaluation, process monitoring and product testing, data collection, data entry, and report preparation. This person will participate in plant committees, safety programs, and the BIC process. This position can be seen as a good opportunity for advancement into a Supervisor position. Leads the quality function for Homedale Beams swing shift. Learns as much as possible about the entire glulam manufacturing process. Communicates findings both orally and in writing to department leaders. Perform all quality checks as required. Maintains records as required. Measures the effectiveness of the graders, and work with APA to train graders as required, improving grading accuracy. Responds to directives/suggestions from APA inspectors, as required. Communicates such suggestions to the leaders in all cases. Provides training to operations personnel on variety of topics related to his/her job responsibilities. Performs beam quality audits and storage audits. Monitors finishing for grading, matching accuracy, and proper warehousing. Performs warehouse proper load identification and cleanliness. Performs other quality checks and tasks as assigned. Basic Qualifications: High school diploma or general education degree (GED); Excellent communication skills and basic computer skills; must have competence in mathematics and basic statistics; effective communication and coordination within the department and with production supervisors is required. Preferred Qualifications: 1+ years experience in quality control in the wood products industry Bachelor's degree in Wood Science or Forestry

Quality Assurance Inspector Do you possess a keen eye for detail? We have an amazing opportunity to use your quality control skills as an Quality Assureance Inspector in Nampa, ID! This position offers a steady work schedule, growth opportunities, and a teamwork environment. Job duties: Maintain data of non-conforming products Verify count of kits are correct Inspect circuit boards as they come off the production line under a mag light Familiar with IPC Class II All other duties assigned by the supervisor Advance Your career today! Pay: $15.00 Hours 5:30am - 4:00pm Shift: Monday - Thursday Why work for Advance Services, Inc. Advance Services is for and about people; we are your employment specialists. Enjoy our easy application process. You NEVER pay a fee! Weekly pay. Fun, Safety, and Attendance Incentives. Health Benefits to keep you and your family healthy. Great Referral Incentives. Advance Services partners with the top companies in the area! Apply for this job by clicking the apply button. You will be directed to our website. Please select the Nampa Branch or call our office at **************. Stop in and see our experienced friendly staff at 1000 W Sanetta St., Nampa, ID 83651. Advance Services is an equal opportunity employer #435

We are Nightforce OpticsRUGGED. RELIABLE. REPEATABLE.™ Nightforce Optics is a leading manufacturer and marketer of premium sport optics products, including riflescopes, spotting scopes and accessories. Known for its rugged products designed for use in punishing conditions, Nightforce is the industry benchmark for high-quality, high-performance products. Nightforce Optics, Inc., was established in 1992 with one goal in mind: to build the finest riflescopes on the market. The same qualities that have made Nightforce the choice of professionals have now created a dedicated following among hunters and serious shooters. We want you to become part of our story! Nightforce Optics is seeking a dedicated Quality Control Inspector to join our team. The Quality Control Inspector plays a critical role in ensuring products meet established quality standards and specifications throughout all stages of the manufacturing process. This position is responsible for performing advanced inspections and testing, identifying and resolving quality issues, and supporting continuous improvement initiatives. The position works closely with production and engineering teams to drive consistent product quality and support the company's overall quality assurance objectives. What You Will Be Doing: Essential Job Duties Perform visual, dimensional, and functional inspections of raw materials, in-process components, and finished products to ensure compliance with engineering drawings and quality specifications. Use precision measuring tools such as micrometers, calipers, height gauges, CMMs, and optical/vision systems to determine product conformance. Develop and execute inspection plans, selecting appropriate methods, tools, and techniques to meet product and process requirements. Operate CMM and vision systems; assist with developing, programming, and optimizing inspection programs for new and existing components. Diagnose and troubleshoot standard inspection and measurement system issues, providing actionable recommendations for resolution. Identify quality issues, support root cause analysis, and assist with corrective and preventive actions to improve product quality. Maintain accurate inspection records, quality logs, and nonconformance documentation; communicate results and concerns to appropriate teams. Ensure inspection activities comply with company procedures, safety requirements, and applicable industry standards. Verify proper calibration, maintenance, and functionality of inspection tools and equipment; report and resolve equipment issues as needed. Collaborate closely with production, engineering, and other departments to resolve quality concerns and support efficient manufacturing workflows. Requirements What we need to see: Required Qualifications High school diploma or equivalent 3+ years in quality control, machining, or a related manufacturing role, including familiarity with quality inspection tools and techniques Solid understanding of interpreting technical drawings Strong understanding of quality control principles, methods, and tools Experience with advanced measuring instruments including but not limited to micrometers, calipers, CMM, etc. Ability to analyze data and generate detailed reports Proficiency with basic computer programs Excellent problem-solving skills, with the ability to identify issues and implement corrective actions Strong organizational and time-management skills Good communication and interpersonal skills for working with different departments and team members Physical Requirements: Required to LIFT/CARRY: 25 pounds up and occasionally up to 50 pounds with or without accommodation Required to PULL/PUSH Frequently: up to 25 pounds Bend: Frequently Twist: Occasionally Squat: Occasionally Climb: Occasionally Kneel/Crawl: Occasionally Reach/Reach Overhead: Frequently Finger Dexterity/Fine Manipulation: Continuously Sit: Frequently Stand: Frequently Computer/Mouse Use: Continuously Drive: Occasionally Repetitive Motion: Substantial movements of the wrist, hands, and/or fingers What Sets Us Apart? 100% paid benefits for the employee including: medical, dental, vision, short term disability, long term disability, and life insurance Paid Time Off Package - 60 hours your first year and increases year after year 10-13 paid holidays per year Matching 401k after one year of employment 4-day work week, who doesn't like 3-day weekends? Pride in our product Employee discount on scopes and Nightforce apparel Nightforce Optics is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race/ethnicity, color, religion, gender, sex, national origin, age, sexual orientation, gender identity, protected veteran status, disability or any other category protected by law. Note: All job offers are contingent on passing pre-employment requirements, including a drug screen and criminal background check. Applicants must also be a "US Person" as defined by the International Traffic in Arms Regulations (ITAR). Application Deadline: February 1, 2026 @11:59pm