Quality technician jobs in New Orleans, LA - 60 jobs

Job Title: Welding Quality Specialist Position Overview: Bollinger is seeking a Welding Quality Specialist to support the quality management systems, by monitoring welding processes, evaluating performance, and implementing initiatives to optimize production. The work spans across manufacturing and inspection environments while supporting the organization's quality objectives. Key Responsibilities: Serves as a key member of the Operations Support Quality Group, promoting quality policy, objectives, and system directives through training and mentoring, particularly in manufacturing areas throughout the Company. Promotes and supports improvement and preventive action processes, including problem-solving techniques such as root cause analysis, implementing action plans, and verifying solution effectiveness. Provides welding technology and NDT administration and support as needed. Assists in monitoring welding processes, evaluates performance data, develops process improvement initiatives, and implements welding technology. Delivers training in quality concepts and weld processes. Conducts internal audits to meet ISO 9001 requirements, performs program review to support Company initiatives, and supports external audits as required. Performs technical writing to create or revise welding procedures and supporting documents. Other duties assigned or requested by Management. Experience: Three (3) years of welding manufacturing experience in shipyard or manufacturing and a bachelor's degree in engineering, industrial technology, or equivalent specialized education; OR six (6) years of shipyard, manufacturing experience with a technical degree in a similar discipline, supported by working knowledge of quality management systems. Auditing experience in quality management systems preferred in shipyard, manufacturing or similar setting. Certified Welding Inspector (CWI) certification is preferred. Strong knowledge in ASME, AWS, ABS, and/or related technical documents regarding welding practices/procedures. NDT Level II certification(s) preferred Skills and Abilities: Strong organizational, analytical, and problem-solving skills with an ability to apply corrective and preventive measures to streamline processes. Knowledgeable of quality system concepts in accordance with established standards. Strong communication skills, both oral and written. Basic knowledge in non-destructive testing or other testing methods. Basic computer skills including knowledge of Microsoft Office applications. Bollinger is an equal opportunity employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, and without regard to sexual orientation and gender identity.

Oracle Lighting | Automotive & Performance Lighting Innovator At Oracle Lighting, we don't just build lighting products-we engineer confidence, performance, and pride into every install. As we scale faster than ever, we're creating a new, critical role to protect what sets us apart. We're looking for a Product Quality & Experience Lead -someone who obsesses over quality, loves solving real-world problems, and takes personal ownership of how products perform from the factory floor to the final install . If you're energized by turning feedback into better products, eliminating repeat issues, and being the voice of the customer inside a growing brand-this role was built for you. What You'll Do Own the End-to-End Product Experience You'll be the connective tissue between engineering, manufacturing, support, marketing, and installers-ensuring Oracle products deliver a premium, installer-friendly experience every time. Spot Issues Before They Become Problems You'll proactively monitor: Customer reviews & installer feedback Early warning trends across product lines Then dig into the why -connecting issues back to specs, processes, packaging, instructions, or real-world use. Drive Real Fixes (Not Just Reports) Perform root-cause analysis and recommend corrective & preventive actions (CAPA) Collaborate directly with product engineers using Six Sigma principles Validate engineering changes and ensure fixes actually stick Protect the Brand from Counterfeits You'll lead monitoring efforts across marketplaces, social platforms, and unauthorized sellers-coordinating takedowns and strengthening product authentication safeguards. Shape Product Launch Readiness Before products hit the market, you'll: Review them through a quality and installer-experience lens Identify confusion points or risk areas Support internal training for sales, support, and partners Be the Voice of the Installer You'll audit real install experiences-fitment, instructions, packaging, ease of use-and translate field feedback into actionable product and process improvements. How Success Is Measured Fewer repeat issues and RMAs Faster root-cause resolution Improved product reviews and installer feedback Reduced install-related support tickets Faster counterfeit detection and response Stronger alignment across engineering, QC, and operations What You Bring Experience in quality control, product management, or manufacturing support (automotive, electronics, or consumer goods preferred) Strong analytical and problem-solving skills Ability to translate real-world feedback into technical or process improvements Clear, confident written and verbal communication Detail-driven, ownership-minded, and proactive by nature Why This Role Matters This role is a brand guardian position. As Oracle Lighting continues to innovate and scale, the Product Experience Guru ensures speed never compromises quality-and that every product reinforces customer trust, installer confidence, and brand loyalty. You won't just find problems. You'll prevent them. You'll fix them. And you'll make great products even better.

DRUG MANUFACTURING TECH Hours Monday - Friday 10: 00am - 2: 30pm Responsible for proper maintenance and operation of drug manufacturing equipment. Accurately weighing raw materials and active ingredients and combining them into a blend. Keeps the equipment and facility clean and in a state of good repair. Participates in the completion of work orders, including batch record documentation per cGMP (current good manufacturing process). Accurately follows and completes documentation with minimal errors or corrections. Completes training, including cGMP and safety training in a timely manner. Must be able to work alone or in a team and can follow procedures exactly. EDUCATION REQUIRED: Entry level HSD or GED equivalent required.

Complete all scheduled production services in an accurate and timely manner to ensure client satisfaction and operational efficiency. Update, maintain, and complete all required orders, records and forms in a timely manner. Deliver, install, operate, and retrieve all audio, video, lighting, rigging and other production equipment. Assist in the coordination and interfacing of outside vendor equipment. Assist clients and in-house personnel in the operation of equipment. Assist clients and in-house personnel in conducting virtual or hybrid meetings. Professionally interface with clients and in-house personnel regarding technical requirements. Act as a supportive liaison to other departments, vendors and clients. Troubleshoot, analyze, diagnose and repair complex audio, A/V and lighting systems in order to minimize down time and improve responsiveness. Monitor, secure and issue production equipment to MCCNO personnel and clients to allow for efficient work processes and successful events. Account for and ensure that equipment is returned undamaged to help maintain costs and aid in the comprehensive equipment management of the department. Perform routine walk- throughs of meeting rooms and conference areas to ensure the proper security of equipment. Assist in the training and development of part-time personnel to accurately and efficiently perform departmental job duties building a share knowledge base. Other Skills and Abilities Individual must be willing to work at heights and use lifts. Ability to complete job duties with minimal supervision. Other Qualifications Working knowledge of monitors, interfacing with laptop computer, and LCD projectors. Familiar with the set up/dismantling of fast fold screens, audio mixers, small audio systems and wireless microphones.

Thompson Engineering is a leader in delivering high-quality infrastructure and construction projects across the South. With a strong commitment to safety, quality, and client satisfaction, we are currently seeking a dedicated and experienced Civil QA/QC Inspector to join our growing team. The Civil QA/QC Inspector will oversee the quality assurance and quality control aspects of civil construction work including earthworks, concrete, asphalt, utilities, drainage, and structural components. The ideal candidate will be responsible for ensuring that all construction activities comply with applicable codes, standards, project specifications, and quality plans. The Ideal candidate must be willing to travel to support project needs. Essential Functions of the Position Conduct QA/QC inspections for all civil construction activities, including but not limited to earthwork, foundation, concrete placement, utilities, roadways, and structural components. Review and interpret project drawings, specifications, and quality requirements. Prepare and maintain daily inspection reports, test results, non-conformance reports (NCRs), and corrective action documentation. Monitor construction work to ensure compliance with approved inspection and test plans (ITPs). Coordinate with contractors, site engineers, consultants, and quality managers to address any quality-related issues. Verify materials and workmanship meet the project's approved submittals and standards. Attend quality and coordination meetings as needed. Ensure that all inspection and testing records are properly documented and archived. Support continuous improvement by identifying recurring quality issues and suggesting practical solutions. Minimum Requirements High School Diploma or GED required; Associate's or Bachelor's degree in Civil Engineering, Construction Management, or related field preferred. Minimum of [3-5] years of experience in civil construction QA/QC, preferably in infrastructure or large-scale projects. In-depth knowledge of industry standards and codes (ASTM, ACI, AASHTO, etc.). Experience reviewing and implementing Inspection and Test Plans (ITPs) and Quality Control Plans (QCPs). Familiarity with construction materials and laboratory/field testing procedures. Strong organizational and communication skills. Proficiency with Microsoft Office Suite and QA/QC reporting tools. Valid driver's license and the ability to travel to project sites. Preferred Certifications (Not Required, but a Plus): ACI Concrete Field Testing Technician - Grade I NICET Certification in Civil/Construction Inspection OSHA 10 or 30 Certification ISO 9001 Quality Management Systems knowledge QMS/QA-related training or certifications Physical Requirements Must be willing to work flexible schedules and overtime as needed by the department needs. Ability to lift and carry a minimum of 40 lbs. Drive a company vehicle in a safe manner Walk, stoop, bend, and climb up and down stairs and ladders Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel. Work in high grounds and high open buildings Work outside for extended periods in the heat and cold Ability to wear appropriate PPE for hazardous materials Ability to read and write in English About Thompson Engineering Thompson Engineering was established in 1953 in Mobile, Alabama. Since then, the company has grown to include multiple offices in states throughout the Southeast. Thompson Engineering is a subsidiary of Thompson Holdings, Inc. Our sister companies are Watermark Design Group, an architectural and interior design firm, and Thompson Consulting Services, a disaster recovery consulting firm. As a group, the three firms provide a broad range of architectural and engineering services. Thompson is an employee-owned firm with more than 300 personnel in multiple disciplines. Our staff has a vested interest in providing safe, quality driven, successful projects that are completed on time and within budget. Our business relies heavily on our performance and the repeat satisfaction of our customers. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

We are seeking a skilled Composite Manufacturing Specialist to join our composites team in New Orleans. This role focuses on producing high-quality composite components used in the wind energy, automotive, and aerospace industries. The ideal candidate has hands-on experience with a variety of composite manufacturing methods and is capable of supporting field service teams when required. Responsibilities Manufacture high-quality composite components following established specifications and quality standards. Perform composite fabrication using VARTM, resin infusion, pre-preg, hand layup, and other advanced composite processes. Maintain a safe, clean, and organized work environment, ensuring compliance with safety and quality procedures. Assist in developing and refining manufacturing processes to improve efficiency and product reliability. Collaborate with engineering, quality, and service teams to resolve technical issues. Support field service operations as needed, including travel to customer or project sites. Conduct inspections, repairs, and adjustments on composite parts in the field or at the factory. Required qualifications 2-10 years of experience manufacturing composite components. Strong proficiency with composite processing techniques such as VARTM, infusion, pre-preg, layups, trimming, curing, and finishing. Solid understanding of composite materials, structural behavior, curing reactions, and process-material interactions. Familiarity with tooling, molds, vacuum systems, and controlled-environment production. Ability to read and interpret technical drawings, work instructions, and process documents. Willingness to travel for field service assignments when required. Strong attention to detail, craftsmanship, and problem-solving skills. Desired Qualifications Previous relevant experience, preferably in the wind industry, but candidates with translatable experience are encouraged to apply. If you meet the qualifications above and are passionate about renewable energy and the wind industry, please apply to join our team as a Composite Manufacturing Specialist. We offer a challenging and rewarding opportunity to make a significant impact on the future of energy.

Job DescriptionBenefits: Dental insurance Health insurance Paid time off Training & development Do you love helping people through difficult situations? Then, dont miss your chance to join our franchise as a new Production Technician. In this position, you will be making a difference each and every day. We have a sincere drive toward the goal of helping make fire and water damage Like it never even happened." Our franchise is seeking someone who is comfortable working hard in challenging situations, enjoys meeting new people, has excellent communication skills, and is a serious multi-tasker. If you are self-motivated and have superb interpersonal skills, then youll thrive in this work environment. Are you highly dependable and super-excited about routinely exceeding expectations? Then you may be our perfect hero ! As a valued SERVPRO Franchise employee, you will receive a competitive pay rate, with opportunity to learn and grow. Primary Responsibilities Inventory and load the work vehicle with equipment, products, and supplies needed for each project. Maintain a clean and organized vehicle and clean equipment appearance. Prepare rooms/areas for work activities. Set up staging area and equipment for each project. Leave jobsite with a clean and orderly appearance. Perform production processes following SERVPRO production guidelines per work order per crew chief directions. Ensure clear two-way communication with crew chief and other technicians (especially regarding customer needs and concerns). Perform end-of-day/end-of-job cleanup and breakdown. Leave jobsite with a clean and orderly appearance. Work closely with the Project Manager over water mitigation Position Requirements Effective oral communication Basic math skills Experience in cleaning/restoration preferred High school diploma/GED IICRC certifications preferred Ability to use an iPad Ability to lift a minimum of 50 pounds regularly, occasionally up to 100 pounds with assistance Ability to climb ladders, work at ceiling heights, work in tight spaces (e.g., crawls spaces, attics) Ability to sit/stand/walk for prolonged periods of time Ability to repetitively push/pull/lift/carry objects Ability to work with/around cleaning products/chemicals Ability to successfully complete a background check subject to applicable law Pay Rate $15.00 - $18.00 hour based on experience, with possibility of overtime pay and increases based on merit. SERVPRO of Greater Covington & Mandeville is an EOE M/F/D/V employer Job Type: Full-time Pay: $15.00 - $18.00 per hour Each SERVPRO Franchise is Independently Owned and Operated. All employees of a SERVPRO Franchise are hired by, employed by, and under the sole supervision and control of an independently owned and operated Servpro Franchise. Servpro Franchise employees are not employed by, jointly employed by, agents of or under the supervision or control of Servpro Industries, LLC or Servpro Franchisor, LLC (the Franchisor), in any manner whatsoever. All Sample Forms provided by Servpro Industries to Servpro Franchises should be reviewed and approved by the Franchises attorney for compliance with Federal, State and Local laws. All Sample Forms are provided for informational purposes and Servpro Franchises may choose whether or not to use them.

Join our team as a QUALITY TECHNICIAN and be responsible for ensuring all Reily Foods products meet all our customer and regulatory standards! We're family owned and have a passion for flavor providing iconic coffee and tea beverages that have created memories for over 120 years! Hours: 1st shift 4:30am - 3:00pm Responsibilities: Conduct routine inspections of raw materials, in-process production, and finished goods Perform quality tests and analyses using appropriate tools and equipment Utilize Digital Production System (Redzone) to complete quality compliance documents Monitor and ensure production checks are completed for specified area Collaborate with production team to address quality concerns and implement corrective actions Calibrate and use all quality equipment for specified area Learn and maintain customer standards for product specifications and acceptable quality Assist in cupping and other lab functions Support and comply with good manufacturing practices (GMP's) Other duties as assigned Qualifications High school diploma or GED Machine quality or food production experience preferred Knowledge of GFSI audit schemes, such as BRC and SQF and understanding of legal food safety requirements Technical skills include the ability to calibrate testing equipment, using RedZone manufacturing software, and become certified in Quality areas Interpersonal skills include good verbal and written communication, good time management skills, strong attention to details with ability to follow standardized procedures Leadership skills include a positive attitude, being a team player and self-leadership Benefits include health insurance, 401k, LTD, paid vacation and holidays! Reily Foods Company is an equal opportunity employer, Minorities/Females/Disability/Protected Veteran/Sexual Orientation/Gender Identity.

Job Title: QA Technician Department: Quality Reports To: QA Manager FLSA Status: Non-Exempt Hours: 10pm - 6am The Quality Assurance Technician serves as support for the Brewing and Packaging departments by testing and analyzing samples from the beginning to the end of the beer production process. The Quality Assurance Technician is responsible for sampling products, conducting laboratory testing, and analyzing data to ensure the product remains in specification. Essential Duties and Responsibilities include but are not limited to: · Packaged product: ensure desired specifications for label adhesion and placement, correct crown color, date coding, fill heights, dissolved oxygen, carbon dioxide, pH, microbiological plating, can seam inspections, and chemical analysis via Anton Paar Analysis System. · Sensory analysis: taste product to ensure product consistently matches the desired flavor profile. Assist in conducting group sensory analysis program. · Wort analysis: ensure consistency between brews by microbiological plating, chemical analysis, international bitterness units, and color. · Fermentation analysis: Take daily samples from fermenting and aging brews to test for temperature, pH and gravities. When applicable prepare samples and test them using Gas Chromatography. · Temperatures & Gravities: Take daily fermentation and again samples from BH tanks, conduct · Bright beer: ensure consistency between brews by tasting, microbiological plating, chemical analysis, international bitterness units, pH and color. · Adhere precisely to QA procedures and specifications. Notify QA Manager of product non-conformance and place product on hold until disposition can be determined. · Maintain sanitation and calibrate laboratory instrumentation. · Collect samples properly for laboratory testing and retention. · Enter data into Excel files and Vicinity software databases accurately. · Utilize excellent multi-tasking and problem-solving skills. · Perform additional duties as assigned by QA Manager. · Comply with Employee Handbook policies and safety requirements. · Correct safety hazards or notify Safety Manager when hazards or unsafe conditions are identified. · Adhere to Brewery GMP practices and HACCP plan. · Ability to work independently with little supervision. · Keep work areas clean and organized by picking up scrap trash/debris and removing all waste from lab daily. Working Conditions The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job with or without reasonable accommodations. · Hours may vary if emergencies arise (typical workweek = 40 hours). · Ability to work outside their regular scheduled hours, to be available for emergency and/or prearranged work. · Ability to perform duties involving prolonged standing, sitting, crouching and/or stooping. · Ability to push, pull, and position tools, equipment, and structural material weighing in excess of 65 pounds. · The ability to work near moving parts and machinery. · Ability to work on smooth or uneven surfaces and under varying climatic conditions including exposure to seasonal heat and cold and/or adverse weather conditions · Close vision, distance vision peripheral vision, depth perception, the ability to adjust focus and the ability to see color; either with or without accommodation. Education/Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the knowledge, skill, and/or ability required to perform this job effectively. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. · Degree in Microbiology, Chemistry, Biology or Biochemistry preferred and/or relevant lab experience. · Extensive experience and understanding of aseptic packaging procedures, cleaning and sanitation, preventive maintenance, brewing microbiology and microscopy, record keeping and data analysis. · Knowledge of computers (Word, Excel, Outlook). · Positive attitude with an ongoing sense of urgency. · Ability to understand and execute against deadlines. · Excellent time management skills. · Exceptional written and verbal communication and organizational skills. · Must be at least 21 years of age and eligible to work in the United States. __________________________________________________________________________________________ The Abita Brewing Company reserves the right to revise and alter this job description as needed. ABITA BREWING CO is an EEO Employer - M/F/Disability/Protected Veteran Status View all jobs at this company

Join our team as a QUALITY TECHNICIAN and be responsible for ensuring all Reily Foods products meet all our customer and regulatory standards! We're family owned and have a passion for flavor providing iconic coffee and tea beverages that have created memories for over 120 years! Hours: 1st shift 4:30am - 3:00pm Responsibilities: Conduct routine inspections of raw materials, in-process production, and finished goods Perform quality tests and analyses using appropriate tools and equipment Utilize Digital Production System (Redzone) to complete quality compliance documents Monitor and ensure production checks are completed for specified area Collaborate with production team to address quality concerns and implement corrective actions Calibrate and use all quality equipment for specified area Learn and maintain customer standards for product specifications and acceptable quality Assist in cupping and other lab functions Support and comply with good manufacturing practices (GMP's) Other duties as assigned * High school diploma or GED * Machine quality or food production experience preferred * Knowledge of GFSI audit schemes, such as BRC and SQF and understanding of legal food safety requirements * Technical skills include the ability to calibrate testing equipment, using RedZone manufacturing software, and become certified in Quality areas * Interpersonal skills include good verbal and written communication, good time management skills, strong attention to details with ability to follow standardized procedures * Leadership skills include a positive attitude, being a team player and self-leadership Benefits include health insurance, 401k, LTD, paid vacation and holidays! Reily Foods Company is an equal opportunity employer, Minorities/Females/Disability/Protected Veteran/Sexual Orientation/Gender Identity.

Identifies defects such as: cracks, blisters, stress fractures and cosmetic flaws Grind out defective areas , smooth rough edges Prep Fiberglass, resin, and damaged ares for repair Shape and smooth edges to match contour properly Mix gel coat catalyst and spray or brush repaired surfaces Buff and Polish repaired surfaces Please visit our careers page to see more job opportunities.

At American Rheinmetall Vehicles, we believe in satisfied customers and healthy, engaged employees. We listen to our customers and develop transformational technology that delivers necessary military vehicle capabilities to our Warfighters while also providing challenging and fulfilling careers to our employees. We are committed to supporting critical advancements in the United States defense industry, like the U.S. Army's XM30 Infantry Combat Vehicle (ICV) program, which will replace the Army's Bradley infantry fighting vehicle with a modernized ICV. Our team has recently won a contract award to advance to Phases 3 and 4 of the program where vehicle design will continue, followed by the prototype build of a small number of vehicles to be tested by the Army. Our solution for the XM30 program, along with our other next-generation tracked and wheeled vehicle systems, empowers and protects the members of our U.S. Armed Forces and ensure their safe return home. In the past two years, we have secured an order intake of about $750 million. We have greatly increased our workforce and are continuing to do so at a rapid pace in order to staff our new facility and support our goals as we continue to grow our business. If you are interested in a meaningful career that directly supports our Warfighters, we encourage you to apply today! EOE, including disability/veterans JOB SUMMARY Process development and continuous improvement are key functions within the Quality team, with immediate focus supporting our rapid business growth in a consistent manner. Lead the APQP Development process for assigned programs. Participate in the development, maturing and monitoring of end-to-end business processes that will ensure effective product development, engineering services and product manufacturing. This will include problem identification, analysis of issues and opportunities, process measurement, and development and implementation of planned process changes using formal, structured methods. We are looking for a Quality Engineer to work for our Slidell , LA facility. If you have at least 5 years of experience in manufacturing, and have a Bachelors degree in a STEM program, Business Administration or high school diploma with at least 10 years of relevant experience or a related field, we invite you to click the Apply button to learn more and share your qualifications with us. If you require a reasonable accommodation to complete the employment application or for any part of the application process, please contact *************************. EOE (including Disability/Veterans) Requirements Essential Functions: Support/Lead the APQP Development process (PFD, PFMEA, Control Plans, etc) for specific programs assigned. Work within the company policies to manage the quality assurance aspects of new product introduction. Provide oversight of the manufacture of products to ensure that engineering documentation is consistent with manufacturing methods employed. Report, coordinate and chair APQP meetings, complete the APQP checklist and document open issues on the APQP action item matrix. Develop test methods/procedures to support product validation efforts. Perform performance validation tests to meet customer specifications. Generate test reports of performance validation tests. Act as quality lead for customer program reviews throughout the development process. Develops and implements programs to assess and improve the quality of products, components, materials and/or operations. Performs inspections and sets quality assurance testing models for analysis of raw materials, materials in process, and finished products. Conducts quality control (QC) inspections on products, materials, components, parts, etc., at various stages of the production process to ensure compliance with established quality and reliability standards. Cross-Functional Collaboration: Ensures feedback is integrated from design, R&D, production, and other teams for continuous improvement Work with outside suppliers and manufacturing plants to complete and approve supplier PPAP submissions When needed, participate on site at suppliers for program and/or critical issues requiring assistance. Assist with the development, testing, or modifications of prototype or production parts. Direct supplier to Set up appropriate testing procedures and record all necessary data, calibrate test equipment as needed, establish procedures for technical measuring. Lead the development and implementation of a Process Improvement Initiatives Develop and document new business process to support the ARV Quality System Support manufacturing activities at our partners and suppliers facilities Support and adhere to all company safety and environmental regulations & policies Undertake other duties as determined by the Site Quality Manager or his/her delegate Supervisory Responsibilities: No Supervisory responsibilities but will train/mentor Quality Techs. Deputy for Site Quality Manager Minimum Qualifications: Knowledge, Skills and Abilities (as demonstrated through experience, training and/or testing) Knowledge and experience working with AS9100D/IATF16949/ISO9001 Standard. Knowledge of Systems based design and related Standards/Processes Ability to read and understand drawings. Working knowledge of GD&T Capable with Microsoft Office tools - Excel, Word, PowerPoint Understand of lean thinking, using lean tools to improve performance Working knowledge of TeamCenter Technical Analysis: Expert in statistical tools, process capability Problem Solving: Uses root cause analysis tools like 8D, 5 Why, and/or Ishikawa. Solid understanding of Continuous Improvement with proven track record of implementation Effective and professional communication and organization skills Good analytical and problem solving skills Ability to present to clients and internal stakeholders Familiarity of the US DoD process and procedures for vehicle development and acquisition. Practical ‘hands on' attitude with the ability to operate independently. Must promote collaboration and facilitate teamwork across the organization and its external service providers. Must be tactful, diplomatic, and work with integrity, honesty, and respect for others. Customer Oriented: Must display exceptional listening and analytical skills in order to understand customer concerns and needs with the ability to respond promptly and effectively to those needs. High level of self-motivation and standards with the ability to multi-task; balancing "analysis" with "doing". Must be adaptable and able to prioritize and work under pressure to meet deadlines. Work on own initiative. Preferred Qualifications: Knowledge of APQP and AS9145 preferred Working knowledge of Solumina & Plex preferred Education: Bachelor's degree in STEM(Science, Technology, Engineering and Mathematics) with 5 years of relevant experience: Master's degree with 3 years of relevant experience; or high school diploma with at least 10 years relevant experience. Experience: 5 or more years of relevant manufacturing experience 5 or more years of leadership / supervisory / managerial experience Experience of working in a multi-national, multi-organizational and corporate environment Experience with quality, engineering and supply chain management in a highly regulated industry Background Prerequisites: Must undergo and meet company standards for background check, employment verification, reference checks and controlled substance testing. All employment at ARV is contingent upon the ability to obtain and maintain a government security clearance if the position requires it. Working Conditions and Physical Demands: With or without reasonable accommodations, requires the physical and mental capacity to perform effectively all essential functions. In addition to other demands, the demands of the job include: Ability to lift up to 25 pounds occasionally Ability to travel up to 10% of the time. Occasional travel to Europe may be required Ability to stand for long periods

Job Description Stoa Group is nationally ranked #5 best places to work in multifamily; we pride ourselves on having a great company culture where we put our employees first. Our Floating Quality Control Technician will be responsible for all final quality control inspections to ensure adherence to company quality standards for all mechanical, electrical, structural, and finish trades. This position will cover and fill in as needed along the Gulf Coast areas in Louisiana, Mississippi, Alabama, and Florida panhandle. Who you are Organized and Accountable - You have exceptional time management abilities and can juggle the needs of changing priorities while accomplishing objectives. Detail-oriented - Able to see the big picture, focusing on details critical to achieving the overall quality of the end goal. Reliable - Are consistent day in and day out with showing up and not needing to be given tasks to complete daily. Can self-manage tasks well and take ownership over job duties. Consistent - Able to focus and maintain consistent inspection routines and processes during repetitive tasks. Motivated - You invest extra energy to reach your goals and help your team reach theirs. Trusted Team Player - You enjoy partnering with others and building constructive working relationships that foster the collaboration necessary to deliver outstanding results. You are accountable to your teammates and follow through on commitments. What you'll do Conducts inspections upon building/project completion and uses inspection checklists to monitor compliance. Completes other Quality Assurance documents and reports as required by Stoa QA program Collaborate and communicate with on site construction field teams regarding your planned time on site, as well as issues that you are seeing and areas where there are opportunities for improvement. Acts as an "internal customer" prior to the Community Management team to ensure high levels of quality and functionality are delivered. Manage your schedule between active jobs and plan QC visits based on the project schedule accordingly. Participate in preparatory meetings and regular progress meetings in the assigned area. Perform other duties as specified by QA Manager. Job Requirements & Skills 1-5 years of experience in residential construction; other pertinent work experience will be considered (completed coursework in construction management accepted in place of experience). Ability to work independently without supervision in a deadline-driven environment High level of organization skills and acute attention to detail Current driver's license and reliable transportation Ability to read and comprehend construction drawings/blueprints at a basic level The position requires 90% travel along the Gulf Coast areas in Louisiana, Mississippi, Alabama, and Florida panhandle.but may go up to 100% during peak times. Ability to lift equipment weighing up to 30lbs and stand and walk for extended periods Why Join Stoa Group? Stoa was established in 2017 to construct large-scale multifamily developments throughout the Gulf Coast. We are headquartered in Hammond, LA. Stoa Group develops meaningful relationships and extraordinary communities throughout Louisiana and beyond. We are a values-driven organization that views all employees as our greatest asset. At Stoa Group, we recognize the importance of investing in our employees and putting our people first. When we hire, we look for people who exemplify our core values and contribute positive energy to our culture. Stoa Group empowers our people through an employee-driven culture that delivers more than baseline benefits: Competitive Salaries Retirement Plan with matching Paid Time Off and paid holidays 100% Employer-paid Health Insurance for employees Dental & Vision Insurance Paid mileage reimbursement and meal reimbursement when traveling Paid accommodations for required overnight stays when traveling Employee Rental Discount Professional Development and Growth Opportunities Stoa Group is an Equal Opportunity Employer M/F/Disability/Veterans. All applicants applying must be authorized to work in the United States.

With over 25 years of dedicated service, Laborde Products stands at the forefront of marine engine distribution, committed to delivering excellence across the Southeast, up through the Great Lakes, and along the East Coast. Headquartered in Covington, LA and with branches in Deer Park, TX and Paducah, KY, we are your trusted partner in marine propulsion, featuring top brands like Mitsubishi, Steyr Motors, Yanmar and Scania Marine. We are currently seeking a Production Technician who will be responsible for assembling and servicing Industrial and Marine equipment that will be an integral part of the solutions and value we provide to our customers. In this role, you will: Diagnose, repair and service marine and industrial equipment, including marine propulsion engines, generators, and pump engines. Follow appropriate service manuals, procedures, and schematics to remove and install components. Exhibit safe work habits and comply with all company regulations. Provide troubleshooting and after-sale support to resolve customer issues. Maintain tools for cleanliness and proper operation. May perform other duties as required by business needs. Qualifications we are looking for: High school diploma or equivalent 2+ years of experience as a diesel mechanic preferred. Marine diesel mechanic or technician preferred. Valid driver's license with a clean driving record. Skills you will need: High energy with a positive attitude and strong work ethic. Willing to face complex issues head on and work through challenges to build a stronger organization. Well-developed interpersonal skills. Ability to work well individually and as part of a team with diverse personalities. Tactful and mature. Strong customer service mentality. Basic computer skills. Must own a good foundation of mechanic tools to perform job duties. Ability to read schematics, parts diagrams, and service manuals. What you can expect as a Production Technician: Regularly works around mechanical equipment and may be exposed to high noise levels at times. Frequently required to stand, walk, stoop, kneel, crawl and climb ladders. Regularly required to lift and/or move objects weighing up to 80 lbs. Must be able to grasp hand tools and parts. Successful completion of a pre-employment physical is required for this position. Work Schedule and Benefits: Standard office hours are Monday - Friday from 6am - 3pm. Medical, Dental, and Vision Insurance Life and Disability Insurance 401k plans with company match Paid Time Off and Company Paid Holidays At Laborde Products, we are committed to the success of our company and fellow team members. We do that through teamwork and completing every task with the highest level of honesty, integrity and enthusiasm. We value equal opportunity employment and are committed to hiring individuals regardless of race, color, religion, sex, sexual orientation, national origin, disability, age, veteran status or any other protected group. If you share our same values and are interested in joining a dynamic team, we invite you to submit your resume today. Let's grow together! Applications are accepted only when hiring for open positions. Applications that do not satisfy the minimum qualifications for the position applied for will not be considered. Incomplete and falsified applications also will be disqualified from consideration. Laborde Products does not sponsor visas.

Temp Great Opportunity with a local growing Overview: Kenner, Louisiana: Flexforce Pros is looking to hire a Quality Inspector II for Shift 1 in Department 1461 Quality Test, offering $21.55/hr. This position requires a High School diploma or equivalent, with additional certifications or training in quality control considered a plus. The ideal candidate will have prior experience in industrial manufacturing, with specific skills in reading electrical schematics, and extensive familiarity with testing equipment and measurement tools, including proficiency with a multimeter. Knowledge of both A/C and D/C electricity is essential, as is experience in troubleshooting electrical circuits using schematics and multimeters. The role demands the ability to work both independently and as part of a team, along with strong problem-solving skills and the capacity to perform root cause analysis. Essential Duties: • Read and interpret electrical schematics • Utilize testing equipment and measurement tools effectively, with required experience using a multimeter • Demonstrate knowledge and experience in both A/C and D/C electricity • Troubleshoot electrical circuits using schematics and a multimeter • Work independently and collaboratively within a team environment • Employ problem-solving skills to perform root cause analysis Requirements/Skills: • High School diploma or equivalent • Additional certifications or training in quality control preferred • Previous experience in industrial manufacturing highly desirable • Experience with electrical schematics and troubleshooting • Familiarity with testing equipment and measurement tools, including multimeters • Knowledge and experience in both A/C and D/C electricity • Ability to work independently and in a team • Strong problem-solving skills and ability to perform root cause analysis SHARE Equal Opportunity Statement: FFlexforce Pros is an Equal Opportunity Employer; employment with FTS is governed on the basis of merit, competence, and qualifications. Employment or consideration will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status

Brief Description The Quality Control Inspector is responsible for ensuring compliance with quality standards in the reception, processing, and packaging of meat and marinated products. They will conduct inspections at each stage of production, supervise staff to ensure adherence to procedures, and record results to maintain product traceability. Attention to detail, effective communication skills, and leadership ability are required. Responsibilities Supervision and Quality Control Supervise production staff, ensuring compliance with quality and hygiene procedures. Train employees in good manufacturing practices, food safety, and quality standards. Ensure food safety and sanitation regulations are followed at all stages of meat and marination processing. Monitor the proper handling, storage, and temperature of meat and marinated products. Inspection of Raw Materials and Final Product Verify that meat and marination ingredients meet quality specifications before use in production. Inspect meat cuts for defects, cross-contamination, or irregularities in weight and presentation. Approve or reject in-process and finished products based on established standards. Coordinate with the production team to correct any deviations in real-time. Safety and Hygiene Ensure staff use appropriate protective equipment (gowns, gloves, hairnets, etc.). Supervise the cleaning and sanitization of work areas and equipment before, during, and after production. Guarantee compliance with food safety regulations and USDA guidelines. Documentation and Reporting Record inspection results in quality control logs. Report any non-compliance or findings to supervisors and management for corrective action. Keep sanitation and temperature monitoring records up to date. Record and analyze daily production. Conduct inventories and report shortages as necessary. Equipment Operation and Maintenance Supervise the safe handling of knives, meat saws, and processing machinery. Report equipment malfunctions or maintenance needs for production and/or refrigeration equipment. Other Duties Assist in internal and external quality and food safety audits. Collaborate with other departments to improve efficiency and compliance with standards. Perform other tasks as needed. Physical Requirements Ability to move, lift, and carry products exceeding 50 pounds, with or without assistance. Willingness to work in environments with variable temperatures, including refrigerated and frozen areas, as well as high-temperature production zones. Ability to stand for extended periods, perform repetitive movements such as bending, lifting, and handling heavy products. Possible use of stairs and platforms to access higher storage and production levels.

New Orleans, LA: Flexicrew Technical Services (FTS) is seeking a detail-oriented and skilled Quality Control Technician with strong electrical knowledge to join our team. The ideal candidate will have experience in industrial manufacturing, troubleshooting electrical circuits, and use testing equipment to ensure product quality and compliance with standards. Essential Duties: Perform inspections and quality checks on products, components, and systems. Read and interpret electrical schematics to support testing and troubleshooting. Utilize testing equipment and measurement tools, including multimeters, to verify product specifications. Diagnose and troubleshoot A/C and D/C electrical circuits using schematics and testing tools. Conduct root cause analysis and recommend corrective actions to resolve quality issues. Document inspection results, test findings, and corrective actions accurately. Collaborate with production and engineering teams to maintain product standards and resolve issues. Maintain compliance with safety procedures and quality standards. Requirements/Skills: Previous experience in industrial manufacturing highly desirable. Strong knowledge of A/C and D/C electricity. Proficiency with testing equipment, specifically multimeters. Ability to read and interpret electrical schematics. Experience troubleshooting electrical circuits using schematics and test equipment. Strong problem-solving skills with the ability to perform root cause analysis. Ability to work independently and as part of a team. Physical Requirements: Ability to stand and walk for extended periods (8-12 hour shifts). Ability to bend, stoop, reach, and climb as needed to perform job duties. Regularly lift, carry, push, or pull materials and products (up to 50 lbs). Education: High school diploma or equivalent required; additional certifications or training in quality control preferred. Equal Opportunity Statement: Flexicrew Technical Services is an Equal Opportunity Employer; employment with FTS is governed on the basis of merit, competence, and qualifications. Employment or consideration will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age,

The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: + Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. + Apply technical knowledge and expertise in determining proper equipment installation and operation. + Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. + Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. + Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. + Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards, and technical data. + Review and approve locally developed procedures and solutions to complex repair situations. + Perform analysis of defects and interprets quality control rejection and failure trends. + Monitor safety, training, and certification requirements. + Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. + Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. + Maintain Quality, Safety, Training and Certification Records. + Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. + Inspect forms and records related to aircraft maintenance. + The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. + The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. + Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. + Document maintenance as per Quality Assurance (QA) and established regulatory requirements. + Comply with work order timekeeping system procedures. + Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. + Perform weekly Foreign Object Damage (FOD) walk-downs. + Maintain situational awareness, stay cognitive-focused, and mitigate risks. + Comply with processes and procedures as per DHS/DOD documents and publications. + Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. + Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. + Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. + Perform weekly break room and smoking area cleaning duties. + Perform other duties as assigned. Minimum Requirements: + Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. + High School Diploma or equivalent is required. + Five (5) years of experience in aircraft maintenance. + Valid Airframe and Power Plant (A&P) License required. + Valid FAA Inspection Authorization (IA) required. + Ability to obtain a government flight line driver's license. + Possess a valid United States driver's license. + Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. + Ability to read and interpret data is required. + Ability to read, write, speak and understand English. Physical Requirements/Working Environment: + Capable of performing tasks that frequently require lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. + Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. + Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. + Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. + May be required to work night shifts. + May work in Aircraft maintenance hangar or outside. + Some domestic travel may be required Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

TempToFT One of Louisiana's largest plastic retailers partners, relies on the efficiency of its fulfillment center. Currently, we're seeking a Cell Lead/Operator to oversee operations at our fulfillment center in the nearby Hammond, Louisiana. This skilled multitasker will be responsible for overseeing the production process within their assigned cell, ensuring quality standards are met, and promoting a culture of safety and efficiency. The Cell Lead/Operator will be expected to lead by example, demonstrate strong leadership qualities, and possess a deep understanding of the manufacturing processes within their area. The role will involve coordinating with other team members, troubleshooting issues, and maintaining a clean and organized workspace. Responsibilities: Oversee the production process within the assigned cell to ensure products are manufactured in accordance with quality standards and timelines. Lead team to ensure they are effectively performing their roles and meeting production targets. Identify and troubleshoot any issues that may arise during the manufacturing process. Implement and enforce safety guidelines and procedures to maintain a secure work environment. Collaborate with other departments to ensure smooth workflow and effective communication. Maintain and improve production efficiency within the cell through continuous improvement initiatives. Ensure that all equipment is properly maintained and operated, and coordinate with the maintenance team when necessary. Train new team members on cell processes and procedures to support their successful integration. Keep accurate records of production activities, including inventory levels, downtime, and quality control measurements. Performing hourly quality control measurements to ensure that they are up to MKS' standards. Required skills and qualifications: Strong leadership and team management skills Excellent problem-solving abilities Deep understanding of manufacturing processes and equipment Solid knowledge of safety regulations and best practices Effective communication and interpersonal skills Ability to prioritize tasks and manage time effectively Continuous improvement mindset and willingness to learn and adapt Schedule: Swing Shift; 2-2-3 Days and nights; alternates every 28 days Job Type: Full-time Pay: $25.00 - $30.00 per hour Benefits: 401(k) Dental insurance Employee discount Flexible schedule Health insurance Paid time off Vision insurance Education: High school or equivalent (Required) Experience: Maintenance: 1 year (Required)