Quality technician jobs in North Dakota - 79 jobs

This position is responsible for ensuring the lab is fully equipped and operating, ensuring product analysis is completed, out of specification product is placed on hold, coordinating all certificates of analysis, and training other team members on performing product testing procedures for Anchor Ingredients Co., LLC Hillsboro facilities. RESPONSIBILITIES: * Coordinate samples for bias adjustments. Run sample in house, send to third party lab and then enter 3rd party lab results into Mosaic Manager * Perform quality testing on in-process samples and lot/load samples * Perform mycotoxin testing on samples * Coordinate samples when needed for mycotoxin test method validation with Neogen * Perform calibration and maintenance activities on lab testing equipment * Complete daily check samples on NIR * Maintain clean environment for lab are and lab equipment. * Work with QA Manager and Plant QA manager on updating lab manual documentation and defining and writing new procedures when needed * Keep inventory of testing supplies and reorder as needed to ensure adequate supply is maintained * Ensure COA's are sent for all outbound orders shipping from the facility(s). Coordinate sampling/testing for loads that are scheduled to leave outside of lab hours. * Print COA's and send with drivers * Email COAs to the customer QA department * Review internal lab results for compliance to specifications. Work with QA Manager and Ops team when results are starting to trend near out of spec limits * Work alongside customer service, operations and the rest of the quality team to ensure compliance with Anchor and customer requirements * Assist in the implementation of internal quality documentation including product specifications, QA procedures, etc. * Identify opportunities to increase efficiencies and streamline lab operations * Train in new employees or other team members on testing procedures. * Be resource to the scale operators when questions arise regarding product testing * Conduct any secondary or confirmatory testing when needed. * Participate in additional internal training opportunities related to food safety, quality, and leadership skills Process Improvement * Provide guidance to plant operators regarding standard operating procedures related to quality, sanitation and safety * Assist with quality project management as it relates to product testing, product specifications, process improvement and audits * Proactively identify opportunities to increase operational efficiencies Safety * Support and adhere to the Company's Safety Program. General Responsibilities * Project work or items outside of this , as specified from time to time by the QA Manager and General Managers. * In common with all other personnel within Anchor Ingredients, the Job Holder is required to adhere to the Company's policies on Safety, Hygiene and good housekeeping. Specifically: * To take reasonable care for the health and safety of himself/herself and that of other persons who may be affected by his/her acts or omissions; * To co-operate regarding any duty or requirement; * To report to his/her immediate manager any hazard which may be discovered on at the place of work. QUALIFICATIONS: The ideal candidate will possess the following: * Meticulous attention to detail and accuracy in work product * Demonstrated problem solving experience * Proficient in Microsoft Office products including Outlook, Excel and Word * Ability to see the big picture while focusing on the process and procedures necessary to produce deliverables * Ability to establish and meet deadlines * Flexibility and the ability to thrive in a fast-paced environment * Excellent interpersonal skills and a team player WORK ENVIRONMENT & PHYSICAL DEMANDS The work environment characteristics and physical demands described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This job operates within both a professional office environment as well as ingredient processing facilities. While performing the duties of this job within the processing facilities, the employee will be exposed to machinery and moving parts. The employee may be exposed to adverse weather conditions, high precarious places and confined spaces, & airborne particles including grain dust and hazardous materials or fumes, which may require the use of PPE. The noise level in some of the work environments may require the use of hearing protection. While performing the duties of this job inside the office, the employee is frequently exposed to normal working conditions for an office environment with a noise level that is usually quiet to moderate. While performing the duties of this job, the employee is regularly required to talk or hear. The employee may be required to stand for long periods of time as well as use hands or fingers to reach or handle, and to reach with hands and arms. The employee is regularly required to stand, walk, climb, balance, stoop, kneel, crouch, or crawl. The employee will occasionally lift and/or move up to 40 pounds. All vision abilities are required to encompass close-up work. On occasion, employee must be able to tolerate and endure extended seasonal hours and maintain alertness to meet deadlines. ABOUT THE COMPANY: Headquartered in Fargo, ND, Anchor Ingredients is the most customer-centric, innovative and transparent farm-to-food partner, dedicated to delivering premium ingredients and added value services to the food and pet food industries. Our farm-level relationships, combined with our global reach, allow us to efficiently procure and process ingredients from around the region and throughout the world, uniquely positioning us to fulfill our customers' diverse ingredient requirements. We take pride in our world-class team which boasts extensive industry experience combined with an unwavering dedication to our company's mission, vision and values, and a commitment to delivering quality and innovation throughout the entire food supply chain. DISCLAIMER: This is not a complete description of responsibility, but reflects the general qualifications, duties and/or responsibilities necessary to perform this position. Anchor Ingredients reserves the right to revise the job description. All candidates who receive a written offer of employment will be required to successfully pass a background check, as well as testing for commonly abused controlled substances in accordance with the company's Drug Free Workplace Policy. Anchor Ingredients is an at-will employer, which means that either the employee or the company may terminate the relationship at any time, with or without notice, and with or without cause. We are an equal opportunity employer.

Entry Level $23.46 with Training and Progression to $36.59 Rotating 12-hour shift schedule. Benefits Day One: Medical, Free Dental, 401K Match plus a Pension and More! The Process Technician extracts and crystalizes sugar from sugar beets. Individuals in this position operate factory processing equipment and mobile equipment, perform pilot lab sampling and analysis, and perform manual labor. Individuals in this position coordinate with supervisors to ensure that production equipment is properly configured and/or set up for desired processing rates and production quality standards. They also perform mechanical inspections and adjustments, including troubleshooting, to maintain optimum operating conditions. Individuals can become proficient in multiple functional areas of the factory through the Process Technician Specialized Training Program. PRE-HIRE QUALIFICATIONS: A High School diploma or a GED certificate is required. Must be able to read, write, and speak English in order to comprehend & interpret technical literature. Must be able to use standard tools. Must have demonstrated ability to use basic computer skills. PHYSICAL/COGNITIVE REQUIREMENTS: Daily activities include standing, bending, stooping, reaching, twisting, squatting/crouching/kneeling, climbing (stairs and ladders), and balancing. Individuals are required to lift assorted items up to 50 pounds individually and up to 100 pounds with assistance. Required to wear Personal Protective Equipment, beard and hairnets, and appropriate clothing. The candidate will be required to submit to and successfully pass a Safety Screen that evaluates their ability to execute the duties & tasks defined for this position safely. Compensation Range:$23.46 - $36.59 /hr Benefits Include:Our benefits include eligibility for comprehensive medical insurance starting on day one.In addition, we offer Pension, 401(k) retirement savings plan with a Company match, paid dental, paid basic life insurance, paid short -term disability, voluntary long-term disability, life insurance, vision insurance, health savings account, flexible spending accounts, paid time off, paid sick leave, paid parental leave, and paid holidays. We also offer tuition reimbursement, service awards, and a 24/7 employee assistance program with access to eight confidential visits with a licensed counselor at no cost. We are proud to offer such a comprehensive package to our employees and believe that it reflects our commitment to their well-being and success. An Equal Opportunity Employer

Your role: As Quality Technician, you will be responsible for accurate performance and communication of all laboratory tests to determine wheat/flour quality and verify finished product meets customer, regulatory and Ardent Mills requirements. You will also maintain and calibrate lab equipment to ensure accuracy of testing; actively participate in Food Safety audits and inspections and follow up and implementation of corrective action. To succeed, you must be able to: Deliver results in first-time situations by inspiring others and working to earn trust every day Serve others with understanding, respect, and care Operate with simplicity, clarity and transparency Deal with and drive change Organize, prioritize and own multiple tasks while meeting or exceeding deadlines Learn and apply new technology and share your knowledge with others Above all you will be expected to carry out all your activities with reliability, integrity, compliance and in a safe, environmentally responsible, and efficient manner. Your responsibilities: Perform quality analysis in all areas within required parameters of certification program and customer specifications Proficiently perform analytical laboratory techniques using basic lab tools Perform routine maintenance and calibration on the machines Communicate results to customers using appropriate computer software Data entry for paperwork generation and record keeping Acting as a front-line leader, positively influencing operator behavior and reporting and acting on quality and food safety concerns Provide back-up to Quality Manager and lab team Assist with food safety inspections and audits Any other duties as assigned by management Essential skills and experience: High School diploma or GED equivalent Basic skills with computer applications, to include Microsoft Office Suite, with the ability to learn and use new computer programs Familiarity with lab environment or knowledge of lab techniques Good to have: Bachelor's degree in a scientific discipline Participated or supported with GMP for 3rd party audit Knowledge of food safety requirements (PRP's, HACCP, PCQI certification) Flour or food production quality experience Physical requirements and working conditions (with or without reasonable accommodation): Ability to wear personal protective equipment (PPE) as is required by the operating areas (i.e. safety glasses, protective footwear, hard hat, hearing protection and, at times, a respirator) Ability to work a rotating schedule including nights, weekends and holidays Ability to work a machine paced continuous process that operates 24 hours a day, 7 days a week with conditions which include: Heat/Cold temperatures (inclement weather) Indoor/Outdoor environment Dusty environment (to include Wheat/Gluten allergens) Noisy environment Frequent moving/vibration/ or other motion of equipment/processes Elevated Places Ability to perform work safely which may require: Frequently standing, walking, rotating, bending/stooping, twisting, crouching, kneeling, balancing and reaching or lifting at varying heights and levels Frequently climbing stairs and/or ladders Occasionally lifting, shoveling and/or carrying Occasionally pushing and/or pulling Working in confined or elevated places Other considerations: Must be able to read, interpret instruction and technology and communicate effectively in English Willing to get cross-trained in at least one other position for development within the facility and to provide any relief duties as needed. Must be willing to work alongside your team including long days, on rotating or varying shifts (days, evenings, and nights) as well as overtime, weekend or holiday work Must be authorized to work in the Unites states without sponsorship now and in the future Except where prohibited by law, all offers of employment are conditioned upon successfully passing a drug test and pre-employment background check Team members must be clean shaven in order to perform tasks where respiratory protection is required and the use of a respirator (including N-95 dust mask) requires a proper seal for adequate protection. The preceding position description has been designed to indicate the general nature and essential duties and responsibilities of work performed by employees within this position. It may not contain a comprehensive inventory of all duties, responsibilities, and qualifications required of employees in this position. The description, duties, functions, and responsibilities are subject to change at the discretion of Ardent Mills. Location: Richardton ND Address: 3775 Hwy 8, Richardton ND, 58652 Additional Locations (if applicable): Employment Type: Full time Additional Information: Competitive Compensation: We provide market-driven base pay, based on skills, abilities, and level of experiences. Our salary ranges are broad, and individual salary will be market competitive based on a candidate's unique set of skills and level of experience. The starting range for this position is $22.80 - $30.30, with additional earning potential possible commensurate with experience. Additionally, we believe that our team members are the reason for our success and all team members are incentive eligible with a target based on contribution, company performance, and individual results achieved. While the specific bonus plan and target amount will be determined based on the role and breadth of contributions, the targeted bonus plan and targeted percentage amount for this role is Bonus - OIP, 5% Annual. Benefits: At Ardent Mills we offer a wide range of benefits to our team members and their eligible family members. Some of our great benefit programs you may be eligible for include: • Medical, Dental and Vision Coverage• Health and Dependent Savings Accounts • Life and Disability Programs • Voluntary Benefit Programs • Company Sponsored Wellness Programs • Retirement Savings with Company Match • Team Member and Family Assistance Program (EAP) • Paid Time Off and Paid Holidays • Employee Recognition Program with Rewards (RAVE). Application Deadline: EEO Commitment: At Ardent Mills, everyone matters and everyone has a voice. We are committed to providing an environment of mutual respect where equal opportunities are available to all applicants and team members and the decisions will be based on merit, competence, performance, and business needs. We are proud to be an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin, ancestry, marital status, sex, sexual orientation, gender identity or expression, physical or mental disability, pregnancy, genetic information, veteran status, age, political affiliation, or any other non-merit characteristic protected by law or not. Together, celebrating our differences, we make Ardent Mills. The preceding position description has been designed to indicate the general nature and essential duties and responsibilities of work performed by employees within this position. It may not contain a comprehensive inventory of all duties, responsibilities, and qualifications required of employees in this position. The description, duties, functions, and responsibilities are subject to change at the discretion of Ardent Mills.En Ardent Mills, todos importan y todos tienen voz. Estamos comprometidos a brindar un ambiente de respeto mutuo donde haya igualdad de oportunidades disponibles para todos los solicitantes y miembros del equipo y las decisiones se basarán en el mérito, la competencia, el desempeño y las necesidades comerciales. Estamos orgullosos de ser un empleador que ofrece igualdad de oportunidades. No discriminamos por motivos de raza, color, religión, credo, origen nacional, ascendencia, estado civil, sexo, orientación sexual, identidad o expresión de género, discapacidad física o mental, embarazo, información genética, condición de veterano, edad, política. afiliación, o cualquier otra característica no meritoria protegida por ley o no. Juntos, celebrando nuestras diferencias, formamos Ardent Mills. La descripción del puesto anterior ha sido diseñada para indicar la naturaleza general y los deberes y responsabilidades esenciales del trabajo realizado por los empleados dentro de este puesto. Es posible que no contenga un inventario completo de todos los deberes, responsabilidades y calificaciones requeridas de los empleados en este puesto. La descripción, los deberes, las funciones y las responsabilidades están sujetos a cambios a discreción de Ardent Mills. Recruitment Fraud Disclaimer: At Ardent Mills, the security of our employees and candidates is a priority. We will never request sensitive information such as your bank account information, social security number, or other non-publicly available information during the application and interview process. If someone asks you for sensitive information, we strongly advise that you assume that individual is not affiliated with Ardent Mills. Some things to watch out for: Slightly altered or unprofessional email addresses. Ardent Mills' Recruitment team only corresponds from email addresses with the domain ********************************* or **************************. Vague job requirements or job descriptions. Our open job opportunities and descriptions can be found at ardentmillscareers.com

At Winland Foods, quality isn't just part of the process-it's who we are. Guided by our values of Excellence, Quality, Integrity, Respect, and Collaboration, our Food Quality Team Members ensure that every product we make is safe, consistent, and worthy of the trust our consumers place in us. As a Food Quality Team Member, you will be on the front line of protecting our standards and reputation. From performing critical inspections to supporting continuous improvement initiatives, you'll play a hands-on role in making sure every product reflects our commitment to excellence. You'll collaborate closely with production and sanitation teams, using your attention to detail and integrity to ensure compliance with food safety regulations and Winland's high expectations. This role is more than checking boxes-it's about leading with care, protecting consumer well-being, and ensuring every bite of our food delivers on Winland's promise of quality and consistency. **Employee Type:** Full time **Location:** ND Grand Forks **Job Type:** Production Group **Job Posting Title:** Quality Assurance Technician - Nights **Job Description:** **Schedule:** **Nights / 12-hour shifts 7pm to 7:30 am, 3-2-2 schedule working 48 hours one week and 36 hours the next week. Weekends and OT required.** **Work Location:** **Grand Forks, ND** **Salary, based on experience and other qualifications:** **Starting rate is $22.80 plus $0.25 second shift differential** **Benefits:** Medical, Dental, Vision, 401(k) with match, STD/LTD/AD&D/Life, HSA, FSA, EAP, Hospital indemnity, Accident Insurance, Identity and Fraud Protection Plan, Legal, and Critical Illness. 9 Paid Holidays, Paid Sick and Vacation. **Duties and Responsibilities:** This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. **Safe Equipment Operation & Maintenance:** + Perform daily inspections, environmental swabbing, and product inspections. + Verify compliance with established standards + Perform daily inspections, preventive maintenance on Quality equipment. **Prod** **uct Handling, Quality Control & Inventory Management** **:** + Conduct and oversee tasks like sensory testing, label verification, and analytical testing to ensure product attributes arecorrect. + Understand and follow plant policies for placing materials on hold and collecting retention samples. + Assistwith inventory control for approved suppliers following FIFO practices. + Help with customer sample requests and microbiological testing for shipping requirements. + Communicate quality results to other teams within the plant. **Food Safety & Sanitation Compliance** **:** + Lead facility inspections andassistwith a variety of quality checks and audits. + Follow GMP, HACCP, SQF, FSMA, and company food safety policies. + Maintain cleanliness andsanitation. + Participate in internal auditing. + Assistin leading internal audits. **Team Collaboration, Leadership & Training** **:** + Collaborate with cross-functional teams to resolve quality issues and investigate customer complaints + Assistteam members, adapt to operational changes, and contribute to productivity, safety, and quality goals. + Provide backup coverage for multiple roles, share knowledge with peers, and support training. + Assist with SOP development and training. + Facilitate cross-departmental collaboration. **Documentation, Communication & Continuous Improvement** **:** + Manage specialized quality programs and documentation, using technical skills in systems like SAP and other quality management software. + Prepareaccuratewritten documentation. + Record inventory transactions, shipments, and quality results in SAP. + Ensure precision in recording and reporting test results. + Support plant trials, process improvements, and cost savings projects. + Participate in 5S efforts. + Assistin reviewing quality paperwork and document control programs. + Work with supervisors and team to develop solutions to issues. + Act as 5S champion for area. **Knowledge, Training and Experience:** **Education & Experience** **:** + High School Diploma or GED required.Degreein Biology, Chemistry or Food Science are preferred. + Minimum 1 year of work experience in manufacturing or foodproduction. + 18+ years of age. **Technical & Mechanical Skills** **:** + Ability tooperate, troubleshoot, andadvise on minor adjustments to formulas or processes. + Mechanical aptitude with the ability toidentifyand resolvequalityirregularities. + Proficiencyin SAP, hand scanners, and basic math skills. + Advanced levels requireproficiencyin MII, WE systems, and interpreting line huddle measures to resolve issues. + Computer literacy in Microsoft Word, Excel, PowerPoint, and Outlook. **Safety & Compliance** **:** + Knowledge of GMPs, SQF, HACCP, FSMA, and other food safety regulations. + Commitment to following all company safety policies and procedures. + Ability tolift upto 50 lbs., push heavy loads, stand/walk up to 90% of shift, and climb as needed. + Must have near and far visual acuity, some color perception, and full range of hand/arm movement. **Teamwork, Communication & Leadership** **:** + Communicate effectively in English, both verbally and in writing. + Work independently and collaboratively in a team environment, with a proactive, team-oriented mindset. + Provide training, guidance, and feedback to team members (progressively more responsibility at higher levels). + Advanced levels lead projects,identifyskill gaps, and support multiple initiatives with minimal supervision. **Personal Attributes & Work Ethic** **:** + Positive attitude, dependable, self-motivated, and willing to work overtime or weekends as needed. + Strong problem-solving skills, attention to detail, and ability to multitask in a fast-paced environment. + Demonstrated accountability for work quality, attendance, and continuous improvement. **Physical Demands:** + Employees must be able to stand and walk for extended periods of time. Tasks may involve frequent climbing, pulling, pushing, carrying, grasping, reaching, twisting, turning, and stooping. + Ability tolift upto 50lbsfrequently. + Must have good hand-eye coordination, motor skills, and 20/20 corrected vision. + Must have normal hearing and vision (with correction if needed), including the ability to distinguish colors for color-coded containers in production areas. + Employeesmust wear all required PPE according to the specific manufacturing environment, as outlined in the Employee Handbook, posted policies, or as directed by leadership. + Must adhere to all safety policies, including lock-out/tag-out, safe lifting techniques, and others as instructed. + Exposure to wet, humid conditions, moving mechanical parts, high areas, fumes, airborne particles, extreme temperatures, electrical risks, and vibrations depending on the area assigned + Mustmaintaina clean and safe work environment and report any food safety or quality issuesimmediatelyto management. **EEO Statement:** Winland Foods seeks to recruit, develop, and retain the most talented people from a diverse candidate pool, and as a global company we believe our success is enhanced by fostering equity and inclusion in the workplace. Therefore, Winland Foods is committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical or mental disability, marital status, sexual orientation, gender identity, genetic information, military or veteran status, and any other characteristic protected by applicable law. **About Us** At Winland Foods, we're passionate about creating exceptional food experiences that bring people together. We are a dynamic and growing company specializing in meal preparation products-from pasta and sauces to plant-based proteins and more. Our portfolio includes beloved consumer brands and custom private-label solutions for retail and foodservice channels. **Why Work With Us?** We believe in being exceptional **from the land to the table** . That means: + **Commitment to Quality:** We consistently exceed industry standards across our value chain. + **Sustainability & Responsibility:** We prioritize environmental stewardship and make a positive impact on the world around us. + **People First:** The safety, well-being, and growth of our employees are at the heart of everything we do. **Our Culture** We're a team of food enthusiasts who value collaboration, innovation, and integrity. At Winland Foods, you'll find an environment where your ideas matter, your contributions are recognized, and your career can thrive. **Explore Opportunities** At Winland Foods, you'll find opportunities across operations, supply chain, marketing, and product development-roles where your work truly makes an impact. By joining our team, you become part of a forward-thinking organization that values passion, collaboration, and shared success with our customers. Together, we're shaping the future of food. **To All Recruitment Agencies** Winland Foods does not accept unsolicited agency resumes/CVs. Please do not forward resumes/CVs to Winland Foods employees, or any company location(s). Winland Foods is not responsible for any fees related to unsolicited resumes/CVs.

Hours: Monday-Thursday, 3:30 PM-2:00 AM Pay: $28-37/hr. (includes 10% shift differential) Quality Assurance Inspector The Quality Assurance Inspector is responsible for performing in-process and final inspections of aeronautical products in accordance with engineering design requirements. This role ensures timely execution, documentation, and reporting of inspection results, including any identified deviations. Candidates must demonstrate strong attention to detail, thoroughness, integrity, sound judgment, and a cooperative attitude. Must be able to train on day shift. Essential Duties & Responsibilities Read, interpret, and inspect to drawings, procedures, and process specifications. Communicate inspection findings to the appropriate departments for corrective action. Demonstrate comprehensive knowledge of the quality assurance manual and related processes/procedures. Verify that products, components, and services meet drawing, specification, and customer requirements. Inspect aircraft assemblies, bonds, parts, and components for acceptance or rejection per specifications. Ensure accuracy and completion of all paperwork and planning related to operations performed and materials used. Identify and communicate design or process improvement opportunities to leadership. Maintain clean, orderly work areas and apply 6S principles; use proper PPE as required. Comply with all work instructions and documentation requirements. Demonstrate leadership qualities when working with manufacturing technicians. Communicate effectively in both oral and written form. Apply written processes and procedures during inspection activities. Adapt to changing job requirements and manage multiple tasks Qualifications To perform this job successfully, applicants must be able to perform each essential function satisfactorily. Reasonable accommodations may be made for individuals with disabilities. Education & Experience 2+ years of experience working within a regulated quality system A&P license preferred Welding certification preferred NDI certification preferred Skills & Abilities Ability to read, write, and speak English clearly Strong teamwork skills and ability to work independently Exceptional attention to detail Proficiency in interpreting engineering drawings and specifications Strong, tactful communication skills Proficient in the use of standard measurement equipment

Job Summary: The QA/QC Technician supports the implementation and execution of the Quality Assurance/Quality Control program on assigned projects. This position is responsible for performing inspections, documentation, and testing activities to ensure construction processes, materials, and installations comply with contract specifications, regulatory requirements, and company safety and operational standards. The QA/QC Technician works closely with field personnel to promote quality compliance on a job-by-job basis. Supervisory Responsibilities: • This position does not have direct supervisory responsibilities but may provide guidance and support to field crews regarding QA/QC requirements. Duties/Responsibilities: • Perform daily QA/QC inspections in accordance with project specifications, drawings, and Inspection and Test Plans (ITPs). • Assist with QC testing activities and ensure testing is performed safely and accurately. • Verify installations meet contract requirements, approved drawings, and applicable codes and standards. • Maintain accurate and timely QA/QC documentation, including inspection reports, test results, and checklists. • Ensure QC testing equipment is in good working condition and assist with tracking calibration certificates. • Communicate findings, deficiencies, and corrective actions to foremen, superintendents, and QA/QC management. • Support turnover and pre-turnover walkdowns and assist with developing punch lists. • Assist with compiling testing, commissioning, and turnover packages for client delivery. • Work closely with field crews to ensure proper installation methods are followed. • Participate in post-construction walkdowns as needed. • Assist with updating QC trackers and logs as directed. • Maintain accountability for assigned QC tools and equipment. • Follow all company safety policies and procedures while performing QA/QC duties. Required Skills/Abilities: • Effective verbal and written communication skills • Strong attention to detail and organizational skills • Ability to read and interpret construction drawings, specifications, and schedules • Willingness to travel up to 75% of the time • Working knowledge of NFPA 70 (NEC) and NFPA 70E • Basic understanding of data acquisition systems (monitoring, communications, networking) • Strong work ethic and ability to work independently and as part of a team • Clean DMV record, drug test results, and background check Education and Experience: • Preferred, 3-5 years of experience in the electrical construction field, commercial, or data center projects • Previous experience performing QA/QC inspections or testing is preferred • Experience working with electrical equipment and conductors to support safe testing and inspections • Experience with electrical system start-up support is a plus • Experience with de-energizing and lockout/tagout procedures • Proficient computer skills, including Excel, MS Office, email, internet, Bluebeam, and applicable DAS or interface systems Physical Requirements: • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed in this job description are representative of the knowledge, skill, and/or ability required.

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Shift is Fri-Sun 6am-6:30 pm. A Process Technician I performs a variety of functions which are directly related to the chemical processing of aircraft parts and components. This typically involves a combination of the following duties such as Aqueous Cleaning, Chemical Etching, Chromate Conversion Coating, Anodizing (sulfuric, non-chromic, hard coat, red & black-dye & Phosphoric Acid), Passivation, Abrasive Blasting, Heat Treatment of Aluminum and Laboratory Analysis. This also includes various types of one of the following; full Laboratory Duties and/or PAA Operator Certification. This is your chance to work in a 'State of the Art" brand new $18 million dollar fully automated Anodize line. You will be working with the newest and most advanced equipment in the industry. **What you will do:** + Responsible for the chemical processing of detailed parts and final assemblies to current spec requirements. + Be well informed about the disposal of Hazardous Waste. + Be aware and informed of the Chemicals you work with throughout the day. + Be knowledgeable of all pertinent customer/company specifications and international standards relating to standards, finishes, special processes, policies, processing, etc. + Capable of processing acceptable parts and passing all required evaluations for some of the required processes. + Proper documentation of the process of parts to meet customer requirements. + Demonstrate a continued interest in good housekeeping and safety practices. + Demonstrate ability to work under a minimal amount of direction for the area supervisor/team coordinator. + Be proficient in handling all of the equipment that is applicable to completing the required job. + Demonstrate an ability to effectively cooperate and communicate with co-workers and personnel in other departments. + Capable of interpreting and understanding part drawings and illustrated planning. + Must be able to follow work instructions to ensure the proper processing of parts. + Must be able properly wear and use Personal Protective Equipment relating to the job performed. **Qualifications you must have:** + Typically requires HS diploma with a minimum of 1 year of relevant experience. In the absence of a HS diploma or GED, 3 years of relevant experience is required. + Must be authorized to work in the U.S. without sponsorship now or in the future. Collins Aerospace will not offer sponsorship for this position. **Qualifications we prefer** : Process technician experience. Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. **What We Offer:** Some of our competitive benefits package includes: + Medical, dental, and vision insurance + Three weeks of vacation for newly hired employees + Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option + Tuition reimbursement program + Student Loan Repayment Program + Life insurance and disability coverage + Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection + Birth, adoption, parental leave benefits + Employee Assistance Plan, including up to 10 free counseling sessions + Healthy You Incentives, wellness rewards program + And more! At Collins Aerospace, our Interiors team is focused on innovation, safety and cost efficiency. But we don't just get people from point A to point B. We're committed to making air travel more comfortable, connected and secure. As a leader in aviation interior products and services, we're helping airlines and original equipment manufacturers create a positive experience for their customers. With offices and manufacturing facilities in more than 12 states across the U.S. and more than 10 countries around the globe, we're changing the game of aircraft interiors. Are you ready to join our team? Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products Why Join Us? Impactful Work: Your role directly influences the safety and performance of our aircraft cargo systems, making a tangible impact on the industry. Growth Opportunities: We offer continuous learning and development opportunities, supporting your career advancement within the company. Collaborative Environment: Join a team that values collaboration, innovation, and excellence. We foster a culture of support and continuous improvement. Note: Background check and drug screen required (every external new hire in the U.S.) Drug Screen only performed on re-hires who have been gone for more than 1 year If you are passionate about quality, have an eye for detail, and are eager to contribute to a dynamic team, we would love to hear from you. Apply now and take the next step in your career with us! Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

We are looking for a Quality Administrator Medicare, to join us in leading our organization forward. McLaren Integrated HMO Group (MIG) is a fully owned subsidiary of McLaren Health Care Corporation and is the parent company of McLaren Health Plan in Michigan and MDwise, Inc. in Indiana. It is an organization with a culture of high performance and a mission to help people live healthier and more satisfying lives. McLaren Health Plan and MDwise, Inc., subsidiaries of MIG, value the talents and abilities of all our employees and seeks to foster an open, cooperative and dynamic environment in which employees and the health plans can thrive. As an employee of MIG, you will be a part of a dynamic organization that considers all our employees as leaders in driving the organization forward and delivering quality service to all our members. McLaren Health Plan is our Michigan-based health plan dedicated to meeting the health care needs of each of our Michigan members. Learn more about McLaren Health Plan at ********************************** MDwise is our Indiana-based health plan, working with the State of Indiana and Centers for Medicare and Medicaid Services to bring you the Hoosier Healthwise and Healthy Indiana Plan health insurance programs. Learn more about MDwise, Inc. at ************************ Position Summary: Responsible for delivering, strategizing, and improving quality performance with a focus on Medicare Star ratings. This position supports the design, development, implementation, and evaluation of quality programs focused on improving the plan's Medicare Star ratings. This individual will collaborate with leadership and cross-functional teams to support the design and execution of quality-related projects and programs to advance organizational priorities related to quality performance. Responsible for proposing targeted actions, aiding in the development of the interventions and coordinating the implementation of all quality operations. Coordinates specific regulatory and contractual responsibilities including, but not limited to, HEDIS, CAHPS, HOS, and NCQA Standard compliance, performance projects, site audits, and any other regulatory requirements. This is a hybrid position with requirements to come onsite as scheduled, Flint, MI. #LI-AK1 #LI-KH1 Qualifications: Required: * Bachelor's degree in health care, business or a related field, or Associate's degree and two (2) years' related experience. * Two (2) years' experience performing quality management activities in a Medicare managed care organization, including HEDIS, HOS, and CAHPS. Preferred: * Master's degree in health care related field. * Four (4) years' experience with a government regulated health organization or a managed care setting with at least three (3) years' experience performing complex quality management activities including HEDIS, NCQA etc. * In-depth understanding of claims administration as it pertains to provider payments, including CPT-4 codes, revenue codes, HCPCS codes, DRGs, etc. * Experience and knowledge of ICD-10, CPT I, CPT II, LOINC, SNOMED, HCPCS diagnosis. Additional Information * Schedule: Full-time * Requisition ID: 25006334 * Daily Work Times: 8:00 am - 5:00 pm * Hours Per Pay Period: 80 * On Call: No * Weekends: No

Job Title: Production TechnicianLocation: Fargo, NDCompensation: $21.00 per hour - paid weekly Job Type: Temp-to-hire About the OpportunityDoherty Staffing Solutions is hiring Production Technicians for a leading producer of insulated glass units located in Fargo, ND. If you enjoy a fast-paced environment and want reliable hours with weekly pay, this job could be a great fit. Read below for more information!What You'll Do as a Production Technician: Perform assignments in a safe and efficient manner Work to meet daily production goals through effective flow of units Inspect product quality throughout the process to meet or exceed customer expectations Maintain a clean and safe work environment Contribute to the team through professionalism and values What You Need to Bring to the Production Technician Role: Must be at least 18 years of age Willingness to work overtime as required Ability to stand, walk, lift, bend, and reach with or without reasonable accommodation Basic computer, math, and tape-measuring skills Strong problem-solving skills and attention to detail Ability to work effectively and efficiently in a team environment Why You'll Like Working with Doherty Staffing SolutionsEnjoy weekly pay, access to health coverage options through Benefits in a Card (including preventative and minimum value plans), and temp-to-hire opportunities for long-term stability where applicable. As a family-owned company with over 45 years in business, we pride ourselves on providing personalized support through a local, dedicated recruiter and maintaining a strong reputation backed by positive online ratings. We are committed to fostering an inclusive workplace and are proud to be an Equal Opportunity Employer, welcoming candidates from all backgrounds and experiences.Ready to Apply?Click “Apply Now” to complete our quick, mobile-friendly application. If you have questions about the Production Technician job, please contact our Fargo jobs office directly at 701-707-3366. Doherty Staffing Solutions offers our valued contract employees health coverage through Benefits in a Card (preventative benefit and minimum value plans), along with weekly paychecks via a prepaid card from CHANGE. Learn more and find helpful links to additional resources at www.doherty.com/job-seekers/employee-benefits.

ABOUT US At Retrax, a RealTruck company, we take pride in our reputation for providing innovative and high quality retractable truck bed covers. We love what we do and thrive on the disciplines of design, development, and manufacturing. We strive for excellence in all we do! When you join our team, we offer competitive pay and benefits, an opportunity to build your career, and the chance to be part of our expanding product line-up. We have a great team of employees and we want you to join us in being part of the exciting future of Retrax! POSITION SUMMARY The Quality Engineer works under the guidance of the Quality Manager and is responsible for supporting improvements in product quality and first pass yield. This is accomplished by identifying quality improvement opportunities, collecting Statistical Process Control (SPC) data, and assisting the quality and production team members with projects related to eliminating in process defects and performing root cause analysis of customer quality complaints. The Quality Engineer helps develop corrective actions, continuous improvement projects, and participates or leads in their completion. Corrective actions and continuous improvement projects to be designed to improve first part yield (FPY) in each department of the production facilities by collecting and analyzing data specific to various steps of the process; and helping complete the appropriate problem-solving methodology to implement those improvements. CORE FUNCTIONS Identify and lead projects in facilities to implement corrective actions that are sustainable to resolve process defects and customer quality issues. Seek out areas to improve quality and function in facilities. Collect, analyze, and report real time data related to defect improvement projects and provide support for facility improvement initiatives. Manage the collection of analysis of SPC data. Monitor incoming material quality and conduct discussions and visits with vendors when quality issues arise on purchased product. Drive corrective actions related to incoming materials. Conduct and lead continuous improvement projects in multiple facilities and ensure correct documentation is completed to support outcomes. Promote the use of SPC techniques to help reduce variability and achieve process control. Provide support to the production team in the implementation of changes to drive quality improvements. Provide New Product Development support by participating in Process and Design FMEA (Failure Modes and Effects Analysis). Prepare PPAP (Production Part Approval Process) requests for supplier submission and their subsequent review when received from suppliers. Conduct First Article piece part Inspections for Prototype and First Production Run of new components. QUALIFICATIONS & REQUIREMENTS Education and Experience Bachelor's degree in Engineering, Quality, or related field required 3+ years of related experience in engineering or quality required Experience conducting and designing design of experiments and Gage repair and replace Skills, Abilities, & Knowledge Skilled in CAD Skilled in Microsoft Office Ability to add, subtract, multiply, and divide using whole numbers Ability to calculate percentages, basis points, and solve for unknown Skilled in statistical analysis Ability to work through corrective action process utilizing data to drive decision making Ability to solve complex problems and complete tasks Ability to guide a team toward a consensus solution Skilled in statistical software experience preferred Skilled in Mini-tab analytical software is a plus Skilled in SPC is a plus Travel Occasional travel may be required COMPETENCIES Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs workflows and procedures. Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; commits to long hours of work when necessary to reach goals. Completes tasks on time or notifies appropriate person with an alternate plan. Generates creative solutions; Translates concepts and information into images; Uses feedback to modify designs; Applies design principles; Demonstrates attention to detail. Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. PHYSICAL REQUIREMENTS This position is subject to Light Work: Exerting up to 20 pounds of force occasionally and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls require exertion of force greater than that for Sedentary Work and the worker sits most of the time, the job is rated for light work. Physical Activities This position is subject to the following physical activities: reaching, standing, walking, lifting, grasping, feeling, and hearing. Visual Acuity The worker is required to have close visual acuity to perform an activity such as preparing and analyzing data and figures; transcribing; viewing a computer terminal; expansive reading; visual inspection involving small defects, small parts and/or operation of machines (including inspection); using measurement devices; and/or assembly of fabrication of parts at distances close to the eyes. Working Conditions This position operates in a professional office environment. This role will take trips to the shop floor as needed and will be subject to inside and outside environmental conditions, including heat, noise, vibration, and hazards from a production-based environment. RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep , Bronco and off-road enthusiasts around the world. Globally headquartered in Ann Arbor, Michigan, RealTruck's 6,000+ associates operate from 35+ facilities across four continents. RealTruck's industry leading product portfolio, which includes the Husky Liners total vehicle protection brand, boasts over 1,000 patents and pending applications. The company's omni-channel retail approach delivers a seamless consumer experience online at RealTruck.com, as well as through its 12,000+ dealer network and automotive (OEM) partnerships. Perks That Go the Extra Mile : At RealTruck, we take care of our people-because they drive our success. Enjoy great benefits like medical, dental, and vision coverage, company-paid life insurance and disability, and a 401(k) with company match (eligible the first of the month after you start). Need balance? We've got wellbeing days and parental leave. Want to grow? Take advantage of educational reimbursement. Plus, earn referral bonuses and score exclusive employee discounts on RealTruck products. Great benefits. Great people. Even better careers.

Job Description ABOUT US At Retrax, a RealTruck company, we take pride in our reputation for providing innovative and high quality retractable truck bed covers. We love what we do and thrive on the disciplines of design, development, and manufacturing. We strive for excellence in all we do! When you join our team, we offer competitive pay and benefits, an opportunity to build your career, and the chance to be part of our expanding product line-up. We have a great team of employees and we want you to join us in being part of the exciting future of Retrax! POSITION SUMMARY The Quality Engineer works under the guidance of the Quality Manager and is responsible for supporting improvements in product quality and first pass yield. This is accomplished by identifying quality improvement opportunities, collecting Statistical Process Control (SPC) data, and assisting the quality and production team members with projects related to eliminating in process defects and performing root cause analysis of customer quality complaints. The Quality Engineer helps develop corrective actions, continuous improvement projects, and participates or leads in their completion. Corrective actions and continuous improvement projects to be designed to improve first part yield (FPY) in each department of the production facilities by collecting and analyzing data specific to various steps of the process; and helping complete the appropriate problem-solving methodology to implement those improvements. CORE FUNCTIONS Identify and lead projects in facilities to implement corrective actions that are sustainable to resolve process defects and customer quality issues. Seek out areas to improve quality and function in facilities. Collect, analyze, and report real time data related to defect improvement projects and provide support for facility improvement initiatives. Manage the collection of analysis of SPC data. Monitor incoming material quality and conduct discussions and visits with vendors when quality issues arise on purchased product. Drive corrective actions related to incoming materials. Conduct and lead continuous improvement projects in multiple facilities and ensure correct documentation is completed to support outcomes. Promote the use of SPC techniques to help reduce variability and achieve process control. Provide support to the production team in the implementation of changes to drive quality improvements. Provide New Product Development support by participating in Process and Design FMEA (Failure Modes and Effects Analysis). Prepare PPAP (Production Part Approval Process) requests for supplier submission and their subsequent review when received from suppliers. Conduct First Article piece part Inspections for Prototype and First Production Run of new components. QUALIFICATIONS & REQUIREMENTS Education and Experience Bachelor's degree in Engineering, Quality, or related field required 3+ years of related experience in engineering or quality required Experience conducting and designing design of experiments and Gage repair and replace Skills, Abilities, & Knowledge Skilled in CAD Skilled in Microsoft Office Ability to add, subtract, multiply, and divide using whole numbers Ability to calculate percentages, basis points, and solve for unknown Skilled in statistical analysis Ability to work through corrective action process utilizing data to drive decision making Ability to solve complex problems and complete tasks Ability to guide a team toward a consensus solution Skilled in statistical software experience preferred Skilled in Mini-tab analytical software is a plus Skilled in SPC is a plus Travel Occasional travel may be required COMPETENCIES Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs workflows and procedures. Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; commits to long hours of work when necessary to reach goals. Completes tasks on time or notifies appropriate person with an alternate plan. Generates creative solutions; Translates concepts and information into images; Uses feedback to modify designs; Applies design principles; Demonstrates attention to detail. Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. PHYSICAL REQUIREMENTS This position is subject to Light Work: Exerting up to 20 pounds of force occasionally and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls require exertion of force greater than that for Sedentary Work and the worker sits most of the time, the job is rated for light work. Physical Activities This position is subject to the following physical activities: reaching, standing, walking, lifting, grasping, feeling, and hearing. Visual Acuity The worker is required to have close visual acuity to perform an activity such as preparing and analyzing data and figures; transcribing; viewing a computer terminal; expansive reading; visual inspection involving small defects, small parts and/or operation of machines (including inspection); using measurement devices; and/or assembly of fabrication of parts at distances close to the eyes. Working Conditions This position operates in a professional office environment. This role will take trips to the shop floor as needed and will be subject to inside and outside environmental conditions, including heat, noise, vibration, and hazards from a production-based environment. RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep , Bronco and off-road enthusiasts around the world. Globally headquartered in Ann Arbor, Michigan, RealTruck's 6,000+ associates operate from 35+ facilities across four continents. RealTruck's industry leading product portfolio, which includes the Husky Liners total vehicle protection brand, boasts over 1,000 patents and pending applications. The company's omni-channel retail approach delivers a seamless consumer experience online at RealTruck.com, as well as through its 12,000+ dealer network and automotive (OEM) partnerships. Perks That Go the Extra Mile : At RealTruck, we take care of our people-because they drive our success. Enjoy great benefits like medical, dental, and vision coverage, company-paid life insurance and disability, and a 401(k) with company match (eligible the first of the month after you start). Need balance? We've got wellbeing days and parental leave. Want to grow? Take advantage of educational reimbursement. Plus, earn referral bonuses and score exclusive employee discounts on RealTruck products. Great benefits. Great people. Even better careers.

Advanced Drainage Systems is a leading manufacturer of stormwater and onsite septic wastewater solutions, committed to sustainability and innovation. With a vast manufacturing and distribution network, we deliver high-quality products across multiple industries while recycling over half a billion pounds of plastic annually. At ADS, we foster a culture where diverse perspectives drive better ideas, ensuring every employee feels valued, heard, and empowered to make an impact. Responsibilities A Plastic Manufacturing Technician is responsible for the packaging, labeling and visual quality inspection of all products produced on their respective production line. A Plastic Manufacturing Technician is also required to assist Line Operators with line start-ups, shutdowns and tooling changeovers. Partners closely with the Line Operator to meet established production goals. This position requires the flexibility to work 40+ hours per week and weekends as required. Responsibilities: The responsibilities of this position include, but are not limited to: Embrace a culture of safety Ensure quality by conducting final visual inspections and labeling all finished goods Track quantity of units produced from the production line to ensure efficiency Utilize standard operating procedures to package pipe to be delivered to customers Maintain a safe working environment that includes the consistent use of Personal Protection Equipment to ensure your safety Assist with line tooling changes, start-ups, shutdowns and down-stream equipment set-up Ability to learn and stay current on pipe specifications and packaging requirements Practice continuous improvement which not only includes the line but also facility housekeeping Invest in your career with ADS. Build and maintain job skills and additional earning potential through company training programs Job Skills: This position should possess the following skills/knowledge: Self-motivated and the ability to work independently Energetic and thrive in a fast-paced environment Dependability Ability to learn new skills Team oriented Basic Mathematical skills Preferred Experience: Previous industrial or manufacturing experience Physical Requirements: Ability to perform physical labor for extended periods of time in fluctuating temperatures. Position requires full range of body motion including twisting, bending, reaching, squatting and ability to mount/dismount industrial equipment and vehicles. Ability to stand and be mobile throughout an 8 hour shift. Ability to use hands, arms and legs to physically handle and transport finished goods. Benefits: We offer a competitive salary and an excellent benefits program including: Medical Dental Vision Retirement Plan Paid Holidays/ Vacation Days And much more Company Benefits: Health & Welfare Benefits: Medical and prescription drug plans, telemedicine (with medical plan), dental and vision plans, virtual physical therapy*, an employee assistance program (EAP)*, and voluntary accident, critical illness, and hospital indemnification programs. Financial Benefits: Retirement 401k program with company match, an employee stock purchase plan (voluntary), financial wellness planning*, paid parental leave*, flexible spending accounts (FSA) for child care and health care, short-term and long-term disability*, basic life insurance, accidental death and dismemberment (AD&D)*, adoption financial reimbursement*, tuition reimbursement*, voluntary life insurance (for employees, spouses, and children), and voluntary identity theft and fraud protection. *100% paid by ADS. Why Join ADS? Growth Opportunities & Global Presence: With a global network of approximately 70 manufacturing plants and 40 distribution centers, ADS offers extensive opportunities for career growth and development in various locations around the world. Inclusive and Creative Work Culture: ADS fosters a culture of passion, innovation, and continuous improvement, empowering employees to shape industry-leading solutions. We value diverse perspectives, recognizing that they drive better ideas, processes, and performance. Our workplace is built on respect, inclusivity, and shared responsibility, ensuring every team member feels valued and contributes to our collective success. Innovative & Sustainability Focused: Advanced Drainage Systems is one of the largest plastic recyclers in North America, ensuring over half a billion pounds of plastic is kept out of landfills every year. Learn More: ******************************** EEO Statement ADS supports an inclusive workplace that values diversity of thought, experience, and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. ADS is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law.

POSITION: Welding Quality Control Inspector (Night Shift) SHIFT: 3:00 pm - 1:30 am, Monday - Thursday (OT Friday/Saturday as needed) PAY RATE: $25-$28+ per hour DOE + $2 shift differential pay + Full Benefits Package LOCATION: Fargo, ND We are looking for committed, focused, detail-oriented individuals to join our quality control team as a Quality Control Inspector. This position is responsible for inspecting products to ensure they meet quality and contract specifications and meet external certification standards. If you are perceptive, care about quality, and have an acute concern for detail, apply today to be a Game Changer here at TrueNorth Steel. At TrueNorth Steel we value Safety, Integrity, Humility, Focus, Knowledge, Commitment, and Confidence. Since 1945, we have been delivering quality, trusted products to our customers. As an industry leader in quality manufactured and fabricated steel products, TrueNorth Steel puts safety at the forefront of our business, helping us achieve the quality we promise. TrueNorth Steel offers a comprehensive benefits package to full-time employees, which includes an excellent health/dental package, disability, life insurance, flexible spending account benefits, profit-sharing, 401(k) with company match, and paid time off. ESSENTIAL JOB FUNCTIONS Responsible for inspecting products to ensure they meet quality and contract specifications and meet external certification standards. Follow all company safety and quality requirements. Ensure that all materials and workmanship are completed in accordance with UL, STI, API, AWS, AISC, or City of LA standards, drawings and specifications, as applicable per site. Inspect materials and finished goods to ensure they meet customer requirements and/or contract specifications, including but not limited to checking welds, welding consumables, base material, cut & formed parts, layout work and coatings. Review welding specs and/or requirements for each project and work with team to solve fabrication challenges. Document and segregate non-conforming fabricated material and workmanship. Review and work with site management & shop supervisor to address remedies for non-conformances and their prevention. Ensure Welding Specification Procedures (WPS) are current and in place for projects, as applicable per site. Supervise and/or conduct Welder Qualification Test Reports (WQTR) to AWS (D1.1 and/or D1.5) and CWB standards, as applicable per site. Annual calibration of welding equipment, QC inspection equipment and pre-qualifications for bolt, as applicable per site. Remain current with AWS CWI and City of LA Supervisor &/or Inspector licenses, code analysis, industry standards, procedures and processes, as applicable per site. Understand, support and implement company Quality Management System. Work with Quality Assurance & Site Managers and Shop Supervisor to develop annual training programs for new and experienced employees to minimize product non-conformance. Represent the company, as needed, on field issues requiring investigation and decisions associated with product quality and conformance. Apply and work within appropriate controls related to Safety and Housekeeping. Operate overhead crane safely. Willing to work flexible hours and overtime or weekends as needed. Prompt and dependable attendance. Other duties as assigned. KNOWLEDGE, SKILLS AND QUALITIES Welding inspection training. Any applicable standards knowledge such as AWS, City of LA, API, UL, or STI. A thorough knowledge of contract documents and blueprint reading. Excellent math skills Leadership skills to motivate co-workers to quality workmanship. Ability to accept responsibility and account for his/her actions. Ability to perform work accurately and thoroughly. Ability to be truthful and be seen as credible in the workplace. Ability to make decisions or take actions to solve a problem or reach a goal. Be dependable and trustworthy. Embrace and demonstrate the qualities of the TrueNorth Steel Game Changer definition. EDUCATION AND WORK EXPERIENCE Minimum of five years welding experience, or equivalent training in manufacturing/structural steel. AWS Certified Weld Inspector or Associate Inspector is preferred.

Job Title: Food Safety Quality Assurance Technician Department: Food Safety & Quality Assurance Reports To: Food Safety Quality Assurance Manager Required: Applicant must pass both hair follicle drug screening and background check Salary: $17/hour Positions open:1 Schedule: Monday to Friday; 8-5pm Benefits: Medical, Dental, Vision available after 60 days; paid holidays after 90 days, vacation accrual begins after 90 days, matching 401k available after 1 year Job Summary: The Food Safety Quality Assurance Technician is responsible for ensuring that all food products meet established safety and quality standards. This role involves implementing and monitoring quality control systems, conducting audits/inspections ensuring compliance with regulatory requirements, and fostering a strong food safety culture within the organization. Key Responsibilities: Quality Assurance: Maintain quality assurance programs. Conduct regular inspections of food production facilities to ensure compliance with quality standards. Monitor and document quality assurance activities, including testing, checks and inspection results. Investigate and address food safety and quality issues, proposing corrective actions as needed. Ensure proper documentation and record-keeping of all quality assurance activities. Utilize clerical experience for accurate record-keeping and administrative tasks. Collaboration and Communication: Collaborate with operations teams to ensure adherence to food safety protocols. Communicate effectively with all levels of the organization regarding food safety and quality assurance issues. Continuous Improvement: Identify areas for improvement in food safety and quality assurance processes. Implement continuous improvement initiatives to enhance food safety and quality. Stay informed about new developments in food safety and quality assurance technologies and methodologies. Food Safety Culture: Promote a strong food safety culture within the organization by leading by example and encouraging best practices. Engage employees at all levels in food safety initiatives and foster a sense of ownership and responsibility for food safety. Develop and implement programs to raise awareness and understanding of food safety principles among all staff. Monitor and assess the effectiveness of food safety culture initiatives and make recommendations for improvement. Qualifications & Skills Experience: High school Diploma or equivalent. Minimum of 1 year of experience in food safety or quality assurance. Familiarity with HACCP (Hazard Analysis and Critical Control Points) and GMP (Good Manufacturing Practices). Deep understanding of sanitation practices and food safety regulations. Excellent analytical skills to identify trends, analyze data, and make data-driven decisions. Excellent communication and interpersonal skills. Ability to work independently and as part of a team. Proficiency in Microsoft Office Suite and management software. Be proactive, innovative and take adequate initiatives on quality and food safety issues. Problem-solving and critical thinking skills. Adaptability and Flexibility. Working conditions: This position may require occasional local travel to various production facilities. Ability to work in a fast-paced environment and handle multiple tasks simultaneously. May involve working in environments with varying temperatures and conditions. Training will be provided to enhance your skills and knowledge in food safety practices.

Join Killdeer Mountain Manufacturing as a Full-Time Quality Inspector and embark on an exciting career journey in the vibrant aviation industry! Located in Dickinson, ND, this onsite role offers you the chance to work closely with cutting-edge technologies, ensuring excellence in every product we deliver. You'll thrive in a fun and high-performance environment, where your problem-solving skills will shine and directly impact customer satisfaction. With a competitive pay of $18.50 per hour, your hard work will be rewarded in a family-oriented atmosphere that values integrity and resilience. Experience the thrill of being part of a team dedicated to innovation and safety, where every day brings new challenges and opportunities for growth. You can enjoy great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Health Savings Account, Competitive Salary, Paid Time Off, Snack/Drink Room, Employee Discounts, if you're ready to elevate your career and make a significant impact, apply now! What does a Quality Inspector do? As a Quality Inspector at Killdeer Mountain Manufacturing, your day revolves around precision, vigilance, and accountability in the fast-paced aerospace electronics sector. You kick off your workday by reviewing production schedules and quality standards, setting the stage for excellence. Armed with specialized tools and testing equipment, you meticulously examine cable harnesses, circuit boards, and electronic assemblies, ensuring each component adheres to stringent aerospace specifications. Your keen eye for detail checks for dimensional accuracy, solder integrity, and electrical performance. Throughout your day, you'll document findings and flag nonconformities, collaborating closely with engineering and production teams to address any issues. Your efforts are crucial in guaranteeing that every product meets rigorous standards for flight-critical systems, ultimately safeguarding the reliability and safety of aerospace missions. Join us in this pivotal role and contribute to shaping the future of aviation! What we're looking for in a Quality Inspector To thrive as a Quality Inspector at Killdeer Mountain Manufacturing, you will need a robust set of skills that align with our commitment to excellence in aerospace electronics. A foundational understanding of the Circuit Card manufacturing process is essential, coupled with critical thinking and decision-making capabilities that allow for effective problem-solving. Proficiency in participating in Lot Rejection resolution and facilitating root cause/corrective action activities is key, as is the ability to engage in continuous improvement through lean activities and process enhancement recommendations. You will also be responsible for collecting and entering data to support program initiatives and quality inspection needs, necessitating a high level of independence and self-assurance. Your overall awareness and attention to detail will empower you to perform a variety of related duties and assignments, reinforcing our mission to deliver reliable, high-quality aerospace products. Join us and leverage your skills for impactful contributions! Knowledge and skills required for the position are: Participate in Lot Rejection resolution Participate in training as needed Provide continuous improvements through lean activities and process improvement activities and recommendations Participate and/or facilitate root cause/corrective action activities.  This position requires developing an overall awareness and general knowledge and understanding of the Circuit Card manufacturing process. This position requires a certain level of independence and self assurance as well as critical thinking for decision making. Collect and enter data as required to support program initiatives and quality inspection needs.  This individual has the responsibility and authority to carry out assigned tasks. Performs other related duties and assignments as required. Ready to join our team? We're looking for talented individuals like you to join our team and help us achieve our goals. If you're passionate, driven, and committed to making a difference, we want to hear from you! Don't wait - apply now and take the first step towards a fulfilling career with endless possibilities. Let's work together to make great things happen!

Brief Description: The Electrical Quality Control Inspector supports all Construction activities and reports directly to the Quality Control Supervisor. The incumbent will be responsible for all inspection activities related to Electrical and Instrumentation work to ensure compliance with federal and state regulations, code and client requirements for the project. Description: Schedule: 4 weeks ON 2 weeks OFF * Full-Time * Flexibility for special occasions, family needs, or other accommodations is available Work Location: Watford City, ND Workplace Benefits: * Overtime Guaranteed * Medical Insurance (Individual and Family) * Dental Insurance * Vision Insurance * 401k with Company Match * Accidental Death and Dismemberment (Voluntary) * Life Insurance * Employee Assistance Program Licensing Information and Requirements: * North Dakota Electrical License preferred * Further information available at: ********************** * Reciprocal forms: **********************licensing/reciprocal-license-agreements/ Essential Job Functions: * On-site inspection of electrical and instrumentation * Ensure all electrical and instrumentation activities (i.e., installation, loop checks, completions and pre-commissioning of the electric works) are carried out in accordance with pertinent rules and regulations, codes, standards and specifications. * Inspect and oversee all electrical installation and testing activities and be proactive in projecting any adverse impact on the scheduling and delay of productivity * Monitor and report progress against inspection and test plan * Inspect the production quality to establish requirements are being met * Verify work is in place according to drawing and specifications * Monitor and report all electrical progress and acquire necessary documents and approvals to ensure continued workflow * Record and document all deviations from original plans * Notify management of any discrepancies found * Monitor the performance of all control activities and tests on electrical systems * Troubleshoot and resolve problems relating to electrical quality control * Provide support and training to the personnel in relation to the project quality * Other duties as assigned Required Minimum Qualifications: * High School Diploma, or Equivalent * Five (5) years' electrical field experience; Heavy industrial experience required * Current and valid driver's license, with clean driving record * Familiar with National Electrical Code "NEC" * Proven fluency with computers, including ability to learn new software. Proficient with Microsoft Office Suite. * Current OSHA 10 and Hydrogen Sulfide (H2S) certificates or be able to obtain upon hire Post Job Offer Requirements: * Take and pass a pre-employment drug test and background check. Knowledge, Skills & Abilities Required: * Comprehensive Knowledge of Electrical Quality Control processes, procedures, standards and specifications * Knowledge of electrical systems, equipment, operational and mechanical systems including installation, test, maintenance, and repair * Knowledge and experience with power tools, testing equipment, test lamps, measuring devices, power construction equipment * Knowledge of proper electrical equipment use conducive to conditions and assignments including adherence to Hazardous Materials and Safety Regulations * Knowledge of Microsoft Computer Systems * Skilled in repairing/fixing electrical equipment, wiring, hand or power tools and other fixtures * Ability to recognize and respond to dangerous situations or emergencies such as high voltage systems, electrical fires, loose hot wires, broken power lines, etc. * Ability to diagnose system malfunctions, locate cause of breakdown and correct the problem or recommend solution * Ability to set and balance priorities to complete projects on time * Ability to make decisions and recommend appropriate course of action in difficult situations * Ability to communicate effectively as a supervisor both verbal and written * Ability to maintain positive attitude during difficult situations * Ability to maintain professional demeanor with clients Physical Demand/Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the incumbent is regularly required to talk, hear, and see. * The incumbent frequently is required to stand, stoop, kneel, crouch, climb, balance and walk. * The incumbent is occasionally required to sit. * The incumbent must frequently lift and/or move up to 50 pounds and push/pull up to 100 pounds. * Visual acuity must be adequate to perform all required tasks in a safe manner The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * The noise level in the work environment is usually loud and may require use of ear plugs on occasion. * Work is usually done outside at a job site/field site that may have inclement weather conditions. * The incumbent is exposed to moving mechanical parts, vehicles and equipment. * The employee will be required to work and stay on site during the work rotation and must comply with all Company and Client policies. Who Delta Is: * Delta Constructors provides comprehensive construction, maintenance, and project management services across North America, specializing in both brownfield and greenfield projects for industries such as oil and gas, mining, renewable energy, and infrastructure. Committed to safety, quality, and efficiency, the company fosters strong client relationships, continuously exceeding expectations through skilled teams, lean practices, and a culture of excellence. * To learn more visit: ********************************** Disclaimer: The above job description covers the principal duties and responsibilities of the job. The description shall not however, be construed as a complete job listing of all duties, which may be required from day-to-day. Compensation is dependent upon proven qualifications. Per Diem fine print: Delta pays Per Diem in line with US IRS regulations. Per Diem OR Cost of Living program eligibility and company provided housing depends on the project and availability. Recruiters can provide further information.

Lead Quality Technician This position is responsible for ensuring the lab is fully equipped and operating, ensuring product analysis is completed, out of specification product is placed on hold, coordinating all certificates of analysis, and training other team members on performing product testing procedures for Anchor Ingredients Co., LLC Hillsboro facilities. RESPONSIBILITIES: Coordinate samples for bias adjustments. Run sample in house, send to third party lab and then enter 3rd party lab results into Mosaic Manager Perform quality testing on in-process samples and lot/load samples Perform mycotoxin testing on samples Coordinate samples when needed for mycotoxin test method validation with Neogen Perform calibration and maintenance activities on lab testing equipment Complete daily check samples on NIR Maintain clean environment for lab are and lab equipment. Work with QA Manager and Plant QA manager on updating lab manual documentation and defining and writing new procedures when needed Keep inventory of testing supplies and reorder as needed to ensure adequate supply is maintained Ensure COA's are sent for all outbound orders shipping from the facility(s). Coordinate sampling/testing for loads that are scheduled to leave outside of lab hours. Print COA's and send with drivers Email COAs to the customer QA department Review internal lab results for compliance to specifications. Work with QA Manager and Ops team when results are starting to trend near out of spec limits Work alongside customer service, operations and the rest of the quality team to ensure compliance with Anchor and customer requirements Assist in the implementation of internal quality documentation including product specifications, QA procedures, etc. Identify opportunities to increase efficiencies and streamline lab operations Train in new employees or other team members on testing procedures. Be resource to the scale operators when questions arise regarding product testing Conduct any secondary or confirmatory testing when needed. Participate in additional internal training opportunities related to food safety, quality, and leadership skills Process Improvement Provide guidance to plant operators regarding standard operating procedures related to quality, sanitation and safety Assist with quality project management as it relates to product testing, product specifications, process improvement and audits Proactively identify opportunities to increase operational efficiencies Safety Support and adhere to the Company's Safety Program. General Responsibilities Project work or items outside of this , as specified from time to time by the QA Manager and General Managers. In common with all other personnel within Anchor Ingredients, the Job Holder is required to adhere to the Company's policies on Safety, Hygiene and good housekeeping. Specifically: To take reasonable care for the health and safety of himself/herself and that of other persons who may be affected by his/her acts or omissions; To co-operate regarding any duty or requirement; To report to his/her immediate manager any hazard which may be discovered on at the place of work. QUALIFICATIONS: The ideal candidate will possess the following: Meticulous attention to detail and accuracy in work product Demonstrated problem solving experience Proficient in Microsoft Office products including Outlook, Excel and Word Ability to see the big picture while focusing on the process and procedures necessary to produce deliverables Ability to establish and meet deadlines Flexibility and the ability to thrive in a fast-paced environment Excellent interpersonal skills and a team player WORK ENVIRONMENT & PHYSICAL DEMANDS The work environment characteristics and physical demands described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This job operates within both a professional office environment as well as ingredient processing facilities. While performing the duties of this job within the processing facilities, the employee will be exposed to machinery and moving parts. The employee may be exposed to adverse weather conditions, high precarious places and confined spaces, & airborne particles including grain dust and hazardous materials or fumes, which may require the use of PPE. The noise level in some of the work environments may require the use of hearing protection. While performing the duties of this job inside the office, the employee is frequently exposed to normal working conditions for an office environment with a noise level that is usually quiet to moderate. While performing the duties of this job, the employee is regularly required to talk or hear. The employee may be required to stand for long periods of time as well as use hands or fingers to reach or handle, and to reach with hands and arms. The employee is regularly required to stand, walk, climb, balance, stoop, kneel, crouch, or crawl. The employee will occasionally lift and/or move up to 40 pounds. All vision abilities are required to encompass close-up work. On occasion, employee must be able to tolerate and endure extended seasonal hours and maintain alertness to meet deadlines. ABOUT THE COMPANY: Headquartered in Fargo, ND, Anchor Ingredients is the most customer-centric, innovative and transparent farm-to-food partner, dedicated to delivering premium ingredients and added value services to the food and pet food industries. Our farm-level relationships, combined with our global reach, allow us to efficiently procure and process ingredients from around the region and throughout the world, uniquely positioning us to fulfill our customers' diverse ingredient requirements. We take pride in our world-class team which boasts extensive industry experience combined with an unwavering dedication to our company's mission, vision and values, and a commitment to delivering quality and innovation throughout the entire food supply chain. DISCLAIMER: This is not a complete description of responsibility, but reflects the general qualifications, duties and/or responsibilities necessary to perform this position. Anchor Ingredients reserves the right to revise the job description. All candidates who receive a written offer of employment will be required to successfully pass a background check, as well as testing for commonly abused controlled substances in accordance with the company's Drug Free Workplace Policy. Anchor Ingredients is an at-will employer, which means that either the employee or the company may terminate the relationship at any time, with or without notice, and with or without cause. We are an equal opportunity employer.

POSITION: Welding Quality Inspector (Night Shift) SHIFT: Monday - Thursday 4:00 pm - 2:30 am, (Friday OT as needed) PAY RATE: $25.00-28.00+ per hour, DOE + $2 shift differential LOCATION: West Fargo, ND ESSENTIAL JOB FUNCTION Follow all company safety and quality requirements. Ensure that all materials and workmanship are completed in accordance with UL, STI, API, AWS, AISC, or City of LA standards, drawings and specifications, as applicable per site. Inspect materials and finished goods to ensure they meet customer requirements and/or contract specifications, including but not limited to checking welds, welding consumables, base material, cut & formed parts, layout work and coatings. General knowledge of coatings inspection including blast and paint inspections. Review welding specs and/or requirements for each project and work with team to solve fabrication challenges. Document and segregate non-conforming fabricated material and workmanship. Review and work with site management & shop supervisor to address remedies for non-conformances and their prevention. Ensure Welding Specification Procedures (WPS) are current and in place for projects, as applicable per site. Ensure all inspection and welding equipment maintains current calibration and verification and pre-qualifications for bolt, as applicable per site. Ensure proper bolting and pre-qualification are completed per contract requirements, as applicable per site. Understand and support company Quality Management Systems. Operate overhead crane safely. Willing to work flexible hours and overtime or weekends as needed. Prompt and dependable attendance. Other duties as assigned KNOWLEDGE, SKILLS AND QUALITIE Complete course requirements for Quality Control Welding Inspectors. Any applicable standards knowledge such as AWS, City of LA, API, UL, or STI. Thorough knowledge of blueprint reading and contract documents, when applicable Excellent math skills Leadership skills to motivate co-workers to quality workmanship. Ability to accept responsibility and account for his/her actions. Ability to perform work accurately and thoroughly. Ability to be truthful and be seen as credible in the workplace. Ability to make decisions or take actions to solve a problem or reach a goal. Be dependable and trustworthy EDUCATION AND WORK EXPERIENC High School diploma or GED. Minimum of three years welding experience, or equivalent training in manufacturing/structural steel, Quality Control combination

The Mechanical Quality Control Inspector conducts mechanical inspections, ensuring adherence to quality standards, reviewing and documenting quality procedures, identifying and addressing non-conformities, analyzing data to detect potential issues, and implementing corrective actions to maintain product quality throughout the manufacturing process, all while focusing on safety and regulatory compliance. Schedule: 4 weeks ON 2 weeks OFF * 6 days per week, 10 hours per day * 60 hour per week, opportunity for more * Flexibility for special occasions, family needs, or other accommodations is available. Work Location: Watford City, North Dakota Workplace Benefits: * Overtime Guaranteed * Medical Insurance (Individual and Family) * Dental Insurance * Vision Insurance * 401k with Company Match * Accidental Death and Dismemberment (Voluntary) * Life Insurance * Employee Assistance Program Licensing Information and Requirements: * Must hold a valid AWS "CWI" Certified Welding Inspector License Essential Job Functions: * On-site inspection of structural and mechanical welding practices * Maintaining detailed inspection reports, recording data, and documenting any non-conformances found during inspection. * Investigate and address non-conformities, discrepancies, or deficiencies promptly. * Identifying and reporting defects or deviations from specifications, initiating corrective actions, and following up to ensure issues are being resolved. * Inspect the production quality to establish requirements are being met. * Verify work is in place according to drawing and specifications. * Record and document all deviations from original scope. * Notify management of all discrepancies found. * Other duties as assigned. Required Minimum Qualifications: * High School Diploma, or Equivalent * Two (2) years' heavy mechanical industrial experience required. * Current and valid driver's license, with clean driving record * Proven fluency with computers, including ability to learn new software. Post Job Offer Requirements: * Take and pass a pre-employment drug test and background check. Knowledge, Skills & Abilities Required: * Strong understanding of mechanical principles, welding procedures, and engineering practices * Proficiency in reading and interpreting blueprints and technical drawings * Expertise in using various measuring tools and testing equipment. * Knowledge of quality control methodologies and documentation practices * Excellent attention to detail and ability to identify defects. * Effective communication skills to effectively report quality issues. * Ability to set and balance priorities to complete projects on time. * Ability to make decisions and recommend appropriate course of action in demanding situations. Physical Demand/Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the incumbent is required to talk, hear, and see. * The incumbent frequently is required to stand, stoop, kneel, crouch, climb, balance, walk, and sit. * The incumbent must frequently lift and/or move up to 25 pounds and push/pull up to 50 pounds. * Visual acuity must be adequate to perform all required tasks in a safe manner. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * The noise level in the work environment is usually loud and may require use of ear plugs on occasion. * Work is conducted outside at a job site/field site that may have inclement weather conditions. * The incumbent is exposed to moving mechanical parts, vehicles, and equipment. * The employee is required to work and stay on site during the work rotation and must comply with all Company and Client policies. Who Delta Is: * Delta Constructors provides comprehensive construction, maintenance, and project management services across North America, specializing in both brownfield and greenfield projects for industries such as oil and gas, mining, renewable energy, and infrastructure. Committed to safety, quality, and efficiency, the company fosters strong client relationships, continuously exceeding expectations through skilled teams, lean practices, and a culture of excellence. * To learn more visit: ********************************** Disclaimer: The above job description covers the principal duties and responsibilities of the job. The description shall not however, be construed as a complete job listing of all duties, which may be required from day-to-day. Compensation is dependent upon proven qualifications.