Quality technician jobs in Schenectady, NY - 135 jobs

Production Technician Job Type: Full-Time; Non-Exempt Shift:7am- 3:30pm M-F Hourly Rate: $19.50/hr. Who You Are: As a Production Technician, you will be responsible for the packaging and labeling of the finished goods at our cultivation and manufacturing centers. You will be responsible for the production of a variety of finished products including packaged, dried flower, pre-rolls, vape cartridges and vape pens, and infused products. Our production team is expected to maintain quality control measures to ensure high-quality products and will carry out day-to-day tasks including prepping, packaging, and labeling per standard operating procedures set by Curaleaf and our production management. What You Will Do: * Stage product and packaging supplies across various production lines to meet daily production schedule * Perform quality assurance protocols as designated by Curaleaf's procedures * Increase operational efficiency and reduce waste through ownership, teamwork, communication and collaboration * Perform in-process and post-process quality assurance, testing and conducting visual inspections to ensure all product meets or exceed Curaleaf's specifications and patient's expectations * Ensure 100% compliance involving proper weighing, data recording, product tracking and security throughout the entire packaging process * Operate in an efficient manner that also complies with all OSHA regulations, Curaleaf SOP's and all applicable required procedures * Ensure each product is properly labeled in compliance with state regulations * Work in a quick and efficient manner and strive to consistently increase productivity * Maintain the organization and cleanliness of the extraction room while performing all duties What You Will Bring: * High School Diploma or G.E.D minimum * Effective communication skills working in a team-based environment * Strong attention to detail skills working in a high-volume production environment * Strong work ethic and the ability to be punctual, reliable, and contribute to a positive, professional work environment * Ability to be trained on various production equipment, SOPs, and consistently meet performance expectations set by leadership * Ability to perform repetitive tasks for long periods of time Even Better If: * You have one year of manufacturing and packaging experience with a focus on ensuring product safety, consumer safety and satisfaction, and high product quality is strongly preferred Physical Requirements: * Allergen warnings, potential exposure to dust, pollen, and plant pathogens. * Exposure to cleaning solvents, such as high volumes of isopropyl alcohol. * Daily use of provided PPE, such as masks, hair nets, beard covers, respirators, boot covers, scrubs, non-slip shoes, and Tyvek suits as necessary. * Ability to work in confined spaces * Exposure to loud noises, including but not limited to air compressors, packaging equipment, and alarms. * Exposure to CO2 manufacturing procedures at OSHA approved CO2 levels. * High-stress tolerance, adaptable, flexible ability to work in an ever-changing environment

Overview: Responsible for conducting qualitative and quantitative testing of raw materials and finished goods. Responsibilities: Safely perform laboratory tests on beverages to ensure product is produced within established parameters and make adjustments where necessary. Conduct qualitative and quantitative testing of beverages, syrups, and raw materials throughout the entire production process. Analyze syrup beverage and/or water attributes Audit container rinsers, air blowers, filters, and coders to ensure proper operations. Conduct package quality inspection and quality audits and isolate product that does not meet standards. Maintain highest possible housekeeping standards to prevent microbial contamination Monitoring package appearance, integrity and correct package codes. Requires working with other lab technicians, line foreman, line operators, fork truck drivers, and other production personnel. Responsible for Food Safety and Food Quality Requirements: Demonstrated attention to detail and accuracy Strong analytical skills Ability to read, write and keep records Good computer skills including literacy with Excel and Word Ability to “be on your feet” from beginning to end of shift. Able to lift materials up to 50 pounds Ability to pass pre-employment math test

Overview: Responsible for conducting qualitative and quantitative testing of raw materials and finished goods. Responsibilities: Safely perform laboratory tests on beverages to ensure product is produced within established parameters and make adjustments where necessary. Conduct qualitative and quantitative testing of beverages, syrups, and raw materials throughout the entire production process. Analyze syrup beverage and/or water attributes Audit container rinsers, air blowers, filters, and coders to ensure proper operations. Conduct package quality inspection and quality audits and isolate product that does not meet standards. Maintain highest possible housekeeping standards to prevent microbial contamination Monitoring package appearance, integrity and correct package codes. Requires working with other lab technicians, line foreman, line operators, fork truck drivers, and other production personnel. Responsible for Food Safety and Food Quality Requirements: Demonstrated attention to detail and accuracy Strong analytical skills Ability to read, write and keep records Good computer skills including literacy with Excel and Word Ability to “be on your feet” from beginning to end of shift. Able to lift materials up to 50 pounds Ability to pass pre-employment math test

Job DescriptionBenefits: 401(k) Competitive salary Donation matching Health insurance Opportunity for advancement Paid time off Profit sharing Training & development SERVPRO of South Albany County is seeking a qualified, career oriented Restoration/Production Technician. SERVPRO is the largest cleaning and restoration company in the country. Our company specializes in the cleanup and restoration of residential and commercial property after a fire, smoke, or water damage situation. Required Hours: Vary between 7:00am 7:00pm (will require some flexibility to work overtime/weekends, travel when required, and be on a 24 hour on-call rotating schedule) Job Qualifications: Able to follow direction of on site supervisor and complete tasks with little or no supervision Able to communicate effectively with staff and customers Polite, presentable, and courteous to customers and co-workers Able to lift a minimum of 50 pounds Able to wear full face and half face respirator Able to complete required training both on the job and in the office Comfortable with technology (iPad, iPhone, etc.) Driven to provide superior customer service Dependable, energetic, self motivated Able to thrive in a fast paced work environment Able to handle high stress situations Valid drivers license with a reasonable driving record Available to respond to emergency calls after hours Reliable transportation required Experience in water/fire mitigation, restoration/construction a plus but not required Preferred: IICRC certifications (WRT; ASD; FRST) Job Responsibilities: Arrive at work on time and properly dressed Respond to service calls as needed Communicate with Crew Chief Perform cleanup and restoration services at residential and commercial properties affected by water/fire/mold damage Duties include, but not limited to: water extraction, demolition such as removal of drywall/plaster, baseboards, flooring, moving furniture and other household items, use of hand and power tools, and use of specialized equipment Load and unload trucks with equipment and debris Maintain a clean and orderly jobsite Ensure that customer needs and expectations are exceeded Adhere to strict uniform policy Clean and maintain vehicles, equipment, and warehouse Qualified candidates should respond to this ad with their resume, including references, and a cover letter. Or visit our website to apply: ******************************** Starting at $20-25 hourly. Candidates offered the position will be required to submit to a background check.

Quality Assurance Technician Job Type: Full-time Salary: $41,000$45,000/year (based on experience) Benefits: Health, vision & dental insurance, 401(k), PTO, referral program About Ninth Planet Beverage Solutions Ninth Planet Beverage Solutions is a contract beverage packaging company in Saratoga Springs, NY, specializing in beverage blending, can filling, and secondary packaging. We bring together creativity, craft, and community, with a passion for unique ingredients and bold flavors. We're a collaborative, fun-loving team that values work-life balance and professional growth. Bonus: You get to sample the drinks we produce! Position Summary Wereseeking aQuality Assurance Technician toensure our beverages meet the highest quality standards. This is an entry-level position, ideal for individuals seeking to launch or transition into a career in beverage production and quality control. Reporting to the Quality Assurance Lead, youll play a key role in product testing, documentation, compliance, and continuous improvement. Responsibilities Quality Control Testing Conduct quality control tests and measurements to ensure products meet internal and regulatory standards. Documentation & Record-Keeping Record critical quality metrics like brix, pH, specific gravity, and ABV Plate product samples and record microbiological results accurately Customer Support & Issue Resolution Investigate product-related customer concerns and contribute to effective resolution. Compliance & Audits Follow Good Manufacturing Practices (GMP) and Safe Quality Food (SQF) standards Participate in regular internal audits. Communication & Collaboration Communicate effectively with production and cross-functional teams Collaborate with the QA Lead on ongoing quality initiatives Qualifications Experience in a brewery, winery, distillery, or food and beverage production is a plus. Proficient with Google Workspace (Docs, Sheets, Drive) and digital record-keeping tools Strong attendance record and a reliable work ethic High attention to detail Skills & Attributes Strong communication and interpersonal skills Ability to work independently and as part of a team Effective time management and multitasking Adaptable and open to new ideas and processes Committed to continuous learning and problem-solving Maintains integrity, trust, and accountability Respects colleagues, clients, and stakeholders Work Schedule Monday: 8:00 AM 4:30 PM TuesdayFriday: 6:00 AM 2:30 PM Location: On-site in Saratoga Springs, NY Compensation & Benefits Salary: $41,000$45,000/year (DOE) Medical and dental insurance 401(k) with employer match Paid Time Off (PTO) Employee referral program Beverage sampling perks!

* Performs equipment cleaning tasks related to small parts used in clean rooms (process areas) per approved standard operating procedures (SOPs) and in accordance with production schedules. o This includes loading of parts washer, unloading of parts washer, bagging, and labeling of small parts used for manufacturing production o Maintaining small part inventory o Gowning into the clean room includes donning a gown (jumpsuit), hood, shoe covers, gloves, hairnet, and facemask * Following current good manufacturing practices (cGMPs). o Technicians will be expected to document the performed tasks accurately and per the approved procedure. All documents are subject to review by regulatory agencies and therefore must be maintained appropriately. * Performing unit operations in a timely manner to meet production schedules. * Flexibility and continuous support must be always provided to assist 24/7 manufacturing operations. * Follows current good manufacturing practices (cGMPs) including proper documentation of training. * Ensures all tasks are performed in a manner consistent with safety standards. * Flexibility to work according to the production schedule, as required. * Understand and adhere to strict clean room microbial controls We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements * Requires High School Diploma or equivalent, along with some relevant work experience. * Demonstrated ability to work well with general direction and information * Effective verbal and written communication skills

Who we are: At Vireo Health, we're not just another cannabis company-we're a movement. Founded by physicians and driven by innovation, we blend science, technology, and passion to create top-tier cannabis products and experiences. Our team of 500+ bold creators and trailblazers are shaping the future of the industry, and we want you to be part of it. We take pride in being one of the most diverse and inclusive workplaces in cannabis, fostering a culture where everyone belongs. Through employee engagement, community events, and non-profit partnerships, we're building more than a business-we're building a community. As we rapidly expand nationwide, we're looking for talented, driven, and passionate people to join us. If you're ready to turn your passion into a career, let's grow the future together. What the role is about In this role The Production Technician is responsible for preparing flower for sale, including bucking, trimming, and packaging of cannabis flower products. This position reports to the Production Manager. Starting union pay is $20. Hours of work are 1:30PM-10PM. What impact you'll make: Assist with bucking and de-stemming harvests. Trim flower for sale, and process into final packaging. Production of pre-roll cannabis products (If legalized by the NY DOH). Assemble secondary packaging, and package cannabis products into secondary packaging. Print and apply labels to various types of finish packaged product. Can read instruments (balances, calipers, etc.) Carry out quality control checks on finished products. Maintain a clean and safe working environment including cleaning equipment. Manage parallel workflows. Keeps a detailed production log, dating and recording all tasks performed and relevant. Comfortable performing in a goal driven work environment. Interacts with electronic record keeping. Perform other functions as necessary to provide an adequate supply of product to meet patient demand. Provide feedback to improve process quality. Some machine maintenance will be required. What you've accomplished High School Diploma. At least 2 years relevant experience working in a manufacturing environment. Must be at least 21 years of age. Why Choose Vireo Life's too short to work somewhere that doesn't ignite your passion. The cannabis industry is fast-paced, innovative, and full of opportunity-where science meets creativity, and wellness meets culture. At Vireo Health, we're pioneering the future of cannabis with a team that's as dynamic as the industry itself. Here, you'll find a workplace that's collaborative, inclusive, and driven by HEART and purpose, where your work has a real impact on people's lives. Whether you're cultivating the highest-quality plants, crafting cutting-edge products, or shaping unforgettable customer experiences, you'll be part of something bigger. If you're looking for a career that's exciting, meaningful, and full of growth, let's build the future of cannabis together. ✅ A Growing Industry: Work at the leading tech company in the cannabis industry and help shape the future ✅ Passionate Culture: Join a team that truly cares about the plant, the people, and the purpose behind what we do ✅ Employee Perks: Enjoy competitive pay and benefits, paid time off and employee discounts ✅ Making an Impact: We're committed to education, sustainability, and giving back to the communities we serve. EEO Statement Vireo Health, Inc. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. *******************

Solid Sealing Technology (SST) designs and manufactures small-scale electrical components used around the world. Our parts are found in many types of industrial, medical, and research facilities, and you will work with technologies used on equipment like energy storage systems, MRI machines, and particle accelerators. We have even sent parts to Mars! NASA's Mars Insight Mission uses components made right here in Watervliet, NY. Position Summary: The Quality Control Technician is responsible for providing quality control and assurance throughout all phases of the production process by inspecting and testing incoming and outgoing products to determine if all requirements have been met. The Quality Control Technician also performs various administrative duties associated with the operation of the company's quality system. Essential Duties and Responsibilities: Reads drawings; work instructions and referenced procedures to determine requirements. Performs dimensional and visual inspection and basic electrical and mechanical testing on products received from suppliers and on internally processed products to be shipped to customers. Includes use of: Basic hand measurement tools such as calipers and micrometers. Coordinate Measuring Machine (CMM) and automated Vision Inspection System. High voltage electrical test system. Uses observation and testing to identify faults in materials and manufacturing process. Compares results of inspections and tests to company's quality standards; reports the results to supervisor for final analysis and action steps. Generates inspection reports and certifications for customers. Records logs, charts, and forms detailing quality levels, inspection data, and results of special quality studies for review by supervisor, and other production staff. Records completion of work steps, rework, and scrap transactions, in computer system. Participates in activities in response to quality issues to achieve root-cause solutions and recurrence prevention. Documents and properly handles nonconforming material. Consults with supervisor to determine appropriate recommendations and remedies for questionable products. Routes parts to other operations according to work instructions. Participate in various types of audits (product, process, equipment, department) in relation to adherence to Safety and Quality Processes. Performs other related duties as assigned. Requirements High School diploma or equivalent required. Technical school education with a mathematics emphasis preferred. One to two years of quality control experience in a manufacturing environment preferred. Ability to interpret technical documents such as drawings, specifications, and procedures. Ability to understand the products and processes being inspected. Ability to use measuring tools and electronic inspection equipment. Thorough attention to detail. Excellent verbal and written communication skills. Excellent teamwork and collaboration skills. High level of manual dexterity. Outstanding mathematical skills and analytical abilities. Proficient in Microsoft Office Suite or related software as needed to complete reports. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other legally protected status. Annualized Salary: $41,600-$52,000 per year ($20-25 per hour) Schedule: Monday-Friday, 8:00 AM-4:30 PM Benefits Solid Sealing Technology offers comprehensive benefits for full-time positions, and many begin on first day of employment. Generous Holidays, Vacation and Paid Sick Leave Health, Dental and Vision Insurance Employer-funded Health Reimbursement Account (HRA) Matched 401k Retirement Savings Plan Profit Sharing and Bonuses Group Life Insurance and optional Voluntary Life Insurance Disability Insurance Health Flexible Savings Account (FSA) Dependent Care Assistance Plan An Employee Assistance Program (EAP) Full access to on-site Fitness Center and recreational facilities (Watervliet Arsenal)

Why Us? We want the best and brightest people to help us achieve our mission to develop and deliver life-enhancing products through focused execution. Our nearly 3,000 global team members understand the important role we play in delivering healthcare and are dedicated to supporting each other as we work to bring the best treatments forward. Our shared values of Integrity & Quality, Innovation, Drive, Collaboration and Empathy guide our team and enable us to deliver upon our vision of helping everyone we serve live their best life. Summary Perform basic, intermediate or advanced quantitative and qualitative analyses of pharmaceutical components, in-process material, finished good product, and/or stability product. Depending on the department to which the incumbent reports some of the functions listed may not be applicable. Job Description Job Results & Essential Functions Samples Tested Perform basic analytical laboratory tests (such as potency, purity, uniformity, dissolution, moisture, etc.) in accordance with approved methodology and cGMP, FDA, and DEA regulations, including: a. Set-up, adjustment, calibration and operation of laboratory equipment and instruments, as well as any associated software. b. Prepare solutions, solvents, and mobile phases. c. Accurately prepare, collect, weigh, and analyze samples and reference standards, and determine conformance of results to approved specification limits. Assist in basic investigations for out-of-specification/out-of-trend results. Documentation Completed to Standards Provides accurate and timely documentation of all procedures, calculations, and results. Department Specific Functions LIMS entry, approval, and data release of products Use analytical balances, HPLC, GC, KF Titrator, IR, UV, pH Meter, volumetric glassware Perform wet testing like assay titrations, colorimetric tests, TLC, heavy metals, and sieves Flex skills to other laboratories based on business need Follow established procedures using own discretion and judgment as to the specific approach or technique Identify/Research new lab supplies and ordering current lab supplies Identify and implement cost saving opportunities Sustain laboratory housekeeping and identify improvement opportunities Complete hands-on and electronic training Participate and lead area huddles or shift meetings Perform other duties as assigned QC Tech I - Perform basic wet chemistry, preparation of reagents/solutions, and sample reconciliation following approved methods. QC Tech II - Experienced at some instrumentation and wet testing. QC Tech III - Expert in wet chemistry analysis and instrumentation analysis performed by laboratory. Ability to perform some instrument maintenance and troubleshooting chromatography issues. Trainer for areas of proficiency. Perform peer review and release of all products, participate in validations, and execute Gage R&R experiments. Initiates and supports Out of Specification, Out of Trend, and Exception Investigations. Identify method improvements and perform change controls. Regularly uses communication skills to exchange information, especially technical information within the lab and with other departments. Minimum Requirements Education: High School Diploma or equivalent required. Bachelor Degree in science related field (Chemistry, Biology) is preferred or Associates Degree with equivalent combination of education, experience, and competencies accepted. Experience: Tech I: Classroom or previous work experience in a science related field Tech II: Working knowledge of chemistry required Tech III: Minimum 1-3 years of experience in a cGMP facility Preferred Skills/Qualifications: Perform basic functions of arithmetic: add, subtract, multiply and divide all units of measure. Perform reading, writing and speaking at a basic level. Basic computer skills including Word, Excel and database software. Ability to understand and apply cGMP, SOP, and DEA regulations. Ability to deal with and solve problems of moderate difficulty. Self-motivated, demonstrates initiative, able to make good decisions under pressure. Possess sufficient interpersonal skills to be able to function as part of a team. Attention to detail and accuracy. Ability to learn and apply technical concepts rapidly. Other Skills/Competencies: Comply with company policies and procedures. Follow safe working practices in the execution of assigned duties. Participate in general site and departmental safety initiatives. Organizational Relationship/Scope: Attention to Detail/Focus: Is thorough and precise in accomplishing a task through concern for all the areas involved, no matter how small. Monitors and checks work or information and plans and organizes time and resources efficiently. Double-checks the accuracy of information and work product to provide accurate and consistent work. Provides information on a timely basis and in a usable form to others who need to act on it. Compares observations of finished work to what is expected to find inconsistencies. Listening: Practices attentive and active listening; has the patience to hear people out; can accurately restate the opinions of others even when he/she disagrees. Follows Processes Consistently: Shows concern for all aspects of the job by accurately checking processes and tasks; carefully and accurately follows established procedures for completing work tasks; uses knowledge that is acquired through formal training or extensive on-the-job experience to perform one's job. Problem Solving: Rigorously and systematically connects information, processes and events by organizing divergent information and searching for common themes, patterns, and causal connections. Undertakes a complex task by breaking it down into manageable parts in a systematic, detailed way. Thinks of several possible explanations or alternatives for a situation and anticipates potential obstacles and develops contingency plans to overcome them. Uses intelligence, common sense, hard work and tenacity to solve particularly difficult or complicated challenges. Analytical: Uses a systematic approach in solving problems through analysis of problem and evaluation of alternate solutions; uses logic, mathematics, or other problem-solving tools in data analysis or in generating solutions; logically and thoughtfully sorts through ambiguity and alternatives with rigor and discipline that crystallizes ideas for action; goes beyond analyzing factual information to develop a conceptual understanding of the meaning of a range of information; integrates diverse themes and lines of reasoning to create new insights or levels of understanding for the issue at hand; thinks in terms of generalized models rather than concrete details. Technical Learning: Picks up on technical things quickly; can learn new skills and knowledge; is good at learning new industry, company, product, or technical knowledge; does well in technical courses and seminars. Working Conditions: Physical/Visual Activities or Demands: Physical/visual activities or demands that are commonly associated with the performance of the functions of this job: 1. The job involves sitting, walking, and standing, reaching, talking and hearing. Job requires to exert a negligible amount of force continuously and up to 50 pounds of force occasionally to lift, carry, push, pull or move objects. 2. Depending on task will be on standing or moving majority of the day. Some tasks will require sitting a desk/bench performing work on a computer. 3. The job involves the ability to judge distance and space relationships, identify and distinguish colors and bring objects within 20 inches into clear focus. 4. Flow of work and character of duties involves focused mental and visual attention much or all of the time. Environmental/Atmospheric Conditions commonly associated with the performance of the functions of this job: Typical laboratory work environment. Exposure to pure chemicals, raw materials, and product requires safety precautions and use of lab coat, safety glasses, gloves, dust mask/respirator, safety shoes and/or booties as outlined in MSDS. Work hazards include proximity to chemicals and solutions, exposure to dust, odors, cleaning solvents, noise, vibration, and poor ventilation. Some elements present that make conditions less desirable than usually found in an office environment. EEO Statement: We comply with all applicable federal, state, and local laws prohibiting discrimination and harassment, and provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or genetic information, or any other classification protected by federal, state or local law. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Are you detail-oriented, passionate about quality, and looking for a hands-on role in a fast-paced environment? Repligen's Clifton Park facility is looking for a Quality Inspector I to join our 2nd shift team and play a vital role in ensuring our products meet the highest standards. Make a global impact-join Repligen. We're united by a mission to inspire advances in bioprocessing as a preferred partner in the production of biologic drugs that improve human health worldwide. No matter your role or background, at Repligen, you will play a key part in shaping some of the most innovative and life-changing therapies in the world. We foster a culture of purpose, collaboration, and shared success-where every voice matters and every contribution drives progress. Join us! 2nd shift: 2:00pm-10:30pm, M-F Responsibilities What You'll Do: * Inspect products against acceptance criteria to maintain high-quality standards. * Work closely with manufacturing teams to identify and resolve quality issues. * Read and interpret engineering drawings, specifications, and purchase orders. * Accurately document inspection results using Microsoft Office and other software. * Use precision measurement tools like calipers and pin gauges. * Operate in an ISO 7 cleanroom while following strict gowning procedures. * Support additional quality-related functions as needed. Qualifications What You Bring: * High School Diploma or equivalent (required); Bachelor's degree in science or relevant experience preferred. * Experience in Quality Assurance (QA) or Quality Control (QC) is a plus. * Strong attention to detail and ability to work in a structured environment. * Proficiency in basic math, measurements, and testing equipment. * Experience in a cleanroom environment is highly desirable. * Medical device or medical manufacturing experience is preferred. What Repligen Offers Our mission is to inspire advances in bioprocessing as a trusted partner in the production of biologic drugs that improve human health worldwide. Focused on cost and process efficiencies, we deliver innovative technologies and solutions that help set new standards in bioprocessing. The estimated base salary range for this role, based in the United States of America is $21/Hr.- $23/Hr. Compensation decisions are dependent on several factors including, but not limited to an individual's qualifications, location, internal equity, and alignment with market data. Additionally, employees are eligible to participate in one of our variable cash programs (bonus or commission) and eligible roles may receive equity as part of the compensation package. We offer a wide range of benefits such as paid time off, health/dental/vision, retirement benefits and flexible spending accounts. All compensation and benefits information will be confirmed in writing at the time of offer.

Eurofins Scientific is a global leader in life sciences, delivering analytical testing that helps keep food, water, medicine, and the environment safe. We partner with major companies across pharmaceuticals, environmental science, forensics, genomics, and more to ensure quality, accuracy, and trust in the products people rely on every day. If you're ready to grow your career and make a difference, we'd love to hear from you! Job Description Verification of sample submissions to Quality Control Handling, storage, and organization of samples Delivering samples to QC laboratories for testing as required Interacting with outside customers and functional peer groups Compliance with all pertinent regulatory agency requirements Conducting temperature, environmental, and/or CO2 monitoring. Qualifications Bachelor's Degree required - life sciences major preferred Authorization to work in the United States indefinitely without restriction or sponsorship cGMP experience preferred Candidates living within a commutable distance of Rensselaer, NY are encouraged to apply Additional Information 🕒 Schedule Full‑time position Third-shift Wednesday-Saturday, 10:00 PM - 8:30 AM Training will take place on first shift. 💵 Compensation Base Pay: $21.50 - $22.50 Third-Shift Differential: %15 Flat-rate w eekend shift differential of $50 for each Sunday shift Eurofins USA PSS Insourcing Solutions is a Disabled and Veteran Equal Employment Opportunity employer.

Eurofins Scientific is a global leader in life sciences, delivering analytical testing that helps keep food, water, medicine, and the environment safe. We partner with major companies across pharmaceuticals, environmental science, forensics, genomics, and more to ensure quality, accuracy, and trust in the products people rely on every day. If you're ready to grow your career and make a difference, we'd love to hear from you! Job Description Verification of sample submissions to Quality Control Handling, storage, and organization of samples Delivering samples to QC laboratories for testing as required Interacting with outside customers and functional peer groups Compliance with all pertinent regulatory agency requirements Conducting temperature, environmental, and/or CO2 monitoring. Qualifications Bachelor's Degree required - life sciences major preferred Authorization to work in the United States indefinitely without restriction or sponsorship cGMP experience preferred Candidates living within a commutable distance of Rensselaer, NY are encouraged to apply Additional Information Schedule Full‑time position Third-shift Wednesday-Saturday, 10:00 PM - 8:30 AM Training will take place on first shift. Compensation Base Pay: $21.50 - $22.50 Third-Shift Differential: %15 Flat-rate weekend shift differential of $50 for each Sunday shift Eurofins USA PSS Insourcing Solutions is a Disabled and Veteran Equal Employment Opportunity employer.

Job Type: Full-Time Yes Shift: Monday - Saturday, 3:00 pm - 12:00 am FLSA Status: Non-exempt Compensation: $20.00 per hour, commensurate with experience. About Us Brooklyn Bottling has developed and invested in co-packing capabilities for many years. Our comprehensive range of contract bottling services has been specifically developed and tailored in response to the requirements of our partners. We specialize in co- packing products such as juice cocktails, teas, energy drinks, seltzers, sports drinks, flavored waters, and soft drinks. With our high level of expertise and innovative approach, we always strive to present the best possible options to our partners. We have extensive experience working with many of the biggest names in the beverage industry, which has allowed us to develop smooth and efficient processes both for the mass market and for specialty and niche products. Position Summary The quality control technician maintains and enforces the organization's quality system procedures, ensuring that products and services meet quality standards. Primary Duties and Responsibilities Responsible for performing routine and non-routine analysis of raw materials and products at all stages of the production chain, following validated methodologies. Responsible for product quality control, identifying the characteristics that products and services must have in order to satisfy customers. . Performs physical and physical-chemical tests to analyze the properties of products, brix, Total Acidity, Ph, fill heights, volumes, torque test etc. Reviews and updates operating procedures and may provide input to analytical or instrumental problem solving. Recommends modifications to existing standard quality or production parameters to obtain the highest quality within the capacity limits of the equipment. Control of HACCP and Food Safety compliance. It establishes the conformity or not of raw materials, intermediates and packaging material, from the point of view of the specifications established in quality control. Implementation of quality indicators based on continuous improvement. Finished goods checks in a timely manner and ensured all specifications are met adequately. Be punctual and reliable. Computer literate. Able to perform physical and mental work that requires total concentration and precision. Be self-motivated and be able to manage your time wisely in order to accomplish all the daily tasks required, such as water checks, line checks, approvals, calibrations etc. Be able to understand and follow all company policies, practices and SOP's. Ensure that all SOP's are followed to prevent any product defects. Communicate & coordinate quality issues & activities with QC/QA Lead Follow all Customer's quality requirements provided. Provide QC/QA Team support for the plant Quality Program. Participate in Continuous Improvement initiatives and projects. Complete other duties as assigned by the QC/QA Lead or QC/QA Supervisor / Manager.

Join The Gund Company, where you will find friends who will support and challenge you to crush goals that provide amazing growth opportunities. We are in the business of electrical insulation manufacturing, but we really pride ourselves in just being a group of fun, driven, problem solvers who LOVE what we do! The Gund Company: Take Care of Each Other, Take Care of the Customer and Take Care of the Business Job Summary The Quality Inspector works under the supervision of the Quality Specialist or Regional Quality Manager and Plant Manager to provide quality assurance and quality control support for The Gund Company. The Quality Inspector executes activities associated with inspection and quarantine of nonconformance activities of The Gund Company products. The role supports execution of the quality management system (QMS) at an individual manufacturing site within a global multi-site QMS. Team members work closely with the Quality Specialist and Regional Quality Managers to comply with customer specific requirements and to maintain quality control requirements. Essential Job Functions Process execution a of quality assurance (QA), quality control (QC), and continuous improvement (CI) process at assigned site. Execute in process, first article, PPAP, and other customer defined inspections. Support process engineering in process capability studies and audits. Drive improvement and customer focuses responsiveness to quality issues for assigned site. Other duties as assigned. Requirements Supervisory Responsibilities This position does not have supervisory responsibilities. Qualifications & Skills Understand appropriate gauging practices to ensure specifications of attribute, variable, and transfer gauges. Strong computer skills especially with Microsoft Word, Excel, and Power Point Prior experience with data entry and report analysis in an Enterprise Resource Planning (ERP) system. Willingness to develop project management skills. Keeps rigorous records with an eye for detail. Ability to communicate expectations and instructions to team members. Ability to identify root cause, develop creative solutions to problems and continuously improve systems and processes. Experienced and blueprint reading and application of appropriate measurement systems. Ability to train operators on appropriate inspection methodology. Education & Experience American Society of Quality Certifications, but not required: Certified Quality Inspector. Travel Travel may be required up to 5% of the time. Physical Demands To perform this job successfully, the physical demands listed are representative of those that must be met by an employee. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, walk, use hands to handle and feel, reach with hands and arms, talk, and hear. The position will be required to be in manufacturing facilities. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by those assigned to a particular position. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required and personnel may be required to perform duties outside their normal responsibilities from time to time, as needed. Why Join Us? Our employees have a vested interest in our Company's success. The Gund Company is 30% employee-owned through our ESOP (Employee Stock Ownership Plan). Shares are awarded each year based on a calculation that takes into consideration our Company's financial profitability, employee tenure, and earnings. There is no out-of-pocket investment required! In addition, our employees enjoy: A safe and healthy work environment Competitive wages Comprehensive, cost-effective employee benefits: Health, Dental, Vision, Life, and Disability 401(k) retirement savings program with a 50% employer match up to 6% of contributions Regular employee feedback through our IDP (Individual Development Plan) According to the Gallup Q12 employee survey method, The Gund Company is ranked “world-class” regarding employee engagement. Please review our current career opportunities and consider applying today! We are always accepting applications for new talent to join our organization. EEO Statement: It is the policy of The Gund Company to recruit, hire, train, and promote employees without discriminating based on race, gender, age, religion, national origin, veteran status, sexual preference, or disability. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by those assigned to a particular position. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required and personnel may be required to perform duties outside their normal responsibilities from time to time, as needed. Salary Description $27.00-$34.00

📍 Near Stephentown, New York 💰 Pay Rate: $20/hour 🕒 Schedule: Monday-Friday, 7:00 AM - 3:30 PM Our client, a growing manufacturing operation near Stephentown, NY is seeking a Manufacturing Technician to support the production of composite components used in a variety of applications. This is a full-time, hands-on role well suited for individuals who enjoy working with their hands, learning new processes, and contributing to a quality-focused production team. Position Overview: The Manufacturing Technician assists with the fabrication, finishing, and inspection of composite parts. This role involves working with carbon fiber and fiberglass materials, maintaining safety and quality standards, and supporting continuous improvement efforts. Training is provided for candidates who demonstrate strong work ethic and attention to detail. Key Responsibilities: Cut carbon fiber and fiberglass materials to specification Perform composite lay-up operations using molds Trim, finish, and inspect molded composite parts Conduct basic troubleshooting during the production process Maintain a clean, safe, and organized work area Follow quality standards and inspection procedures Participate in continuous improvement initiatives Cross-train to assist other departments as needed Qualifications & Attributes: Ability to work independently and as part of a team Strong attention to detail and quality Comfortable working with minimal supervision Problem-solving mindset with interest in process improvement Respectful, dependable, and safety-conscious Prior manufacturing experience is helpful but not required Experience with composites is a plus, but training will be provided To see a full listing of all our open positions, please visit: ****************************************************** red Shift Recruiting is the region's premier recruiting agency with over 100 years of combined experience in the recruiting field. We specialize in permanent, temporary, and temp-to-hire positions. Our superior service combined with our highly qualified and carefully selected bank of candidates sets us apart.

Full-time Description Cambridge Valley Machining (CVM) provides comprehensive design through manufacturing services for startups, Fortune 500 businesses, and other domestic and global customers. CVM is a proud supplier within the Space and the Defense industries. At Cambridge Valley Machining, we recognize that the key to our success is our people. We are a family-owned and operated company. Requirements Due to business growth, we are seeking to fill a Quality Technician/CMM Programmer position. Reporting to the Quality Manager, the Quality Tech/CMM Programmer plays a crucial role in manufacturing and quality assurance by writing and maintaining inspection and verification programs and collaborating with team members to optimize inspection methods as well as ensuring product adherence to blueprints, specs, and standards like GD&T (Geometric Dimensioning and Tolerancing) and ISO. The Quality Tech/CMM Programmer works with internal and external suppliers and customers to achieve Quality excellence through proven Quality methods. The successful candidate will be expected to conduct himself or herself in a professional, respectful, and ethical manner at all times; carry out all job responsibilities in accordance with site safety rules and expectations; and actively participate in the innovation and improvement of the site and company. Responsibilities: Programs and operates multiple CMMs using Zeiss Calypso and Hexagon PCDMIS software Analyzes and interprets blueprints, data, manuals, and other materials to determine specifications, inspection and testing procedures, adjustment and certification methods, formulas, and measuring instruments required Revises CMM programs to maximize efficiency, and retests programs to check that corrections have been completed Monitors CMM operations and equipment to ensure conformance to specifications, and makes necessary adjustments Compares computer printouts with original part specifications and blueprints to verify manufacturing accuracy Uses measuring instruments such as calipers, micrometers, height gages etc. to measure and record dimensions of products to verify conformance to specifications Performs first article, in-process, and final inspections using the CMM and hand tools as required; records that information appropriately and shares with the appropriate parties Understands and follows all in-process and final inspection procedures, taking correct action based on conformance/non-conformance Determines disposition of out-of-tolerance product, and follows non-conformance product procedures Communicates non-compliant inspection results with operators, and recommends necessary corrective actions Monitors, records, and analyzes key metrics as well as test and inspection data Coordinates with internal customers to schedule CMM inspections, and maximizes work flow Cleans, maintains, repairs, and calibrates measuring instruments and test equipment such as dial indicators, fixed gages, and height gages Prepares and reports on defect percentages, averages, and test findings Interfaces with Engineers and Machinists to transfer CAD-generated drawings into measurement programs without assistance Supports 5S by cleaning machines, tooling, parts, and all associated work areas Requirements: High school degree; Associates degree in related technical field preferred Three (3) years' experience in quality inspection, including a minimum of 1 year of CMM operation and programming and a minimum of 1 year of unsupervised open surface plate measurement experience Ability to read and interpret drawings, with a strong understanding of GD&T Solid math skills Ability to work with others and independently Good computer skills Attention to detail Ability to use other inspection and test equipment and interpret results Must be a citizen of or person admitted lawfully for permanent residence into the United States. This is a DOD requirement for receiving technical information and distributing.

Job Description Solid Sealing Technology (SST) designs and manufactures small-scale electrical components used around the world. Our parts are found in many types of industrial, medical, and research facilities, and you will work with technologies used on equipment like energy storage systems, MRI machines, and particle accelerators. We have even sent parts to Mars! NASA's Mars Insight Mission uses components made right here in Watervliet, NY. Position Summary: The Quality Control Technician is responsible for providing quality control and assurance throughout all phases of the production process by inspecting and testing incoming and outgoing products to determine if all requirements have been met. The Quality Control Technician also performs various administrative duties associated with the operation of the company's quality system. Essential Duties and Responsibilities: Reads drawings; work instructions and referenced procedures to determine requirements. Performs dimensional and visual inspection and basic electrical and mechanical testing on products received from suppliers and on internally processed products to be shipped to customers. Includes use of: Basic hand measurement tools such as calipers and micrometers. Coordinate Measuring Machine (CMM) and automated Vision Inspection System. High voltage electrical test system. Uses observation and testing to identify faults in materials and manufacturing process. Compares results of inspections and tests to company's quality standards; reports the results to supervisor for final analysis and action steps. Generates inspection reports and certifications for customers. Records logs, charts, and forms detailing quality levels, inspection data, and results of special quality studies for review by supervisor, and other production staff. Records completion of work steps, rework, and scrap transactions, in computer system. Participates in activities in response to quality issues to achieve root-cause solutions and recurrence prevention. Documents and properly handles nonconforming material. Consults with supervisor to determine appropriate recommendations and remedies for questionable products. Routes parts to other operations according to work instructions. Participate in various types of audits (product, process, equipment, department) in relation to adherence to Safety and Quality Processes. Performs other related duties as assigned. Requirements High School diploma or equivalent required. Technical school education with a mathematics emphasis preferred. One to two years of quality control experience in a manufacturing environment preferred. Ability to interpret technical documents such as drawings, specifications, and procedures. Ability to understand the products and processes being inspected. Ability to use measuring tools and electronic inspection equipment. Thorough attention to detail. Excellent verbal and written communication skills. Excellent teamwork and collaboration skills. High level of manual dexterity. Outstanding mathematical skills and analytical abilities. Proficient in Microsoft Office Suite or related software as needed to complete reports. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other legally protected status. Annualized Salary: $41,600-$52,000 per year ($20-25 per hour) Schedule: Monday-Friday, 8:00 AM-4:30 PM Benefits Solid Sealing Technology offers comprehensive benefits for full-time positions, and many begin on first day of employment. Generous Holidays, Vacation and Paid Sick Leave Health, Dental and Vision Insurance Employer-funded Health Reimbursement Account (HRA) Matched 401k Retirement Savings Plan Profit Sharing and Bonuses Group Life Insurance and optional Voluntary Life Insurance Disability Insurance Health Flexible Savings Account (FSA) Dependent Care Assistance Plan An Employee Assistance Program (EAP) Full access to on-site Fitness Center and recreational facilities (Watervliet Arsenal)

At Eurofins, your work supports global health and safety. We invest in your professional growth with opportunities to advance in the biopharmaceutical industry, backed by collaborative teams, work-life balance, and competitive benefits. Eurofins Scientific is a global leader in life sciences, providing analytical testing across industries-from food and water to pharmaceuticals and advanced materials. We help the world's top companies ensure their products are safe, authentic, and accurately labeled. Job Description Verification of sample submissions to Quality Control Handling, storage, and organization of samples Delivering samples to QC laboratories for testing as required Interacting with outside customers and functional peer groups Compliance with all pertinent regulatory agency requirements Conducting temperature, environmental, and/or CO2 monitoring. Qualifications Bachelor's degree in life sciences required Authorization to work in the United States indefinitely without restriction or sponsorship cGMP experience strongly preferred Candidates located within a commutable distance of Rensselaer, NY are encouraged to apply Additional Information 🕒 Schedule Full‑time position Sunday-Wednesday, 6:00 AM - 4:30 PM 💵 Compensation Base Pay: $21.50 - $22.50 Flat-rate w eekend shift differential of $50 for each Sunday shift Eurofins USA PSS Insourcing Solutions is a Disabled and Veteran Equal Employment Opportunity employer.

At Eurofins, your work supports global health and safety. We invest in your professional growth with opportunities to advance in the biopharmaceutical industry, backed by collaborative teams, work-life balance, and competitive benefits. Eurofins Scientific is a global leader in life sciences, providing analytical testing across industries-from food and water to pharmaceuticals and advanced materials. We help the world's top companies ensure their products are safe, authentic, and accurately labeled. Job Description Verification of sample submissions to Quality Control Handling, storage, and organization of samples Delivering samples to QC laboratories for testing as required Interacting with outside customers and functional peer groups Compliance with all pertinent regulatory agency requirements Conducting temperature, environmental, and/or CO2 monitoring. Qualifications Bachelor's degree in life sciences required cGMP experience strongly preferred Authorization to work in the United States indefinitely without restriction or sponsorship Candidates located within a commutable distance of Rensselaer, NY are encouraged to apply Additional Information Position is full-time. This role is on a 1st Shift Wed-Sat 6am - 4:30 PM schedule. Pay range between is $21.50/hr-22.50/hr. An additional flat-rate shift differential of $50 will be included for every weekend shift worked. Excellent full time benefits including comprehensive medical coverage, dental, and vision options Life and disability insurance 401(k) with company match Paid vacation and holidays Eurofins USA PSS Insourcing Solutions is a Disabled and Veteran Equal Employment Opportunity employer.