Quality technician jobs in The Woodlands, TX - 484 jobs

Position: QA/QC Commissioning Associate III Location: Houston, TX Job Id: 796 # of Openings: 1 TITLE: QA/QC Commissioning Associate III LOCATION: Houston, TX POSITION SUMMMARY: The QA/QC Commissioning Associate III assists in quality control and quality assurance of data center critical systems preparing for the commissioning process. The QA/QC Commissioning Associate assists the QA/QC Engineer to ensure that the correct equipment has been purchased and that installation is in accordance with industry standards and equipment specifications. This role will develop skills and industry knowledge to perform increasingly more complex commissioning tasks. ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Develop QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents Follow all standards to perform inspection and tests on all procedures and oversee all testing methods and maintain high standards of quality for all processes Review the quality of all materials at the site and ensure compliance with all project specifications and quality and collaborate with the department for all material procurement and maintain a quality of materials Support the effective implementation of all test and inspection schedules and ensure adherence to all procedures and coordinate with various teams to perform quality audits on processes Assist employees to ensure knowledge of all quality standards and ensure compliance to all quality manuals and procedures and collaborate with contractors and suppliers to maintain the quality of all systems Manage to lift all types of equipment and handle the efficient storage of all hazardous materials and perform quality audits as per the required schedule Understand all products and non-conformance processes and evaluate all documents to ensure the maintenance of optimal quality and prepare monthly reports to evaluate performance Monitor an efficient system and record for all project activities and analyze all processes to ensure all work according to quality requirements Understand all work methods and maintain knowledge on all quality assurance standards and monitor continuous application for all quality assurance processes and recommend corrective actions for all processes Support and follow a method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project Liaise the Technical Engineer for submission of material submittals to Consultant Develop and maintain inspection reports Ensure compliance to federal and state laws, as well as company standards and specifications Maintain calibration of quality testing equipment Perform inspections across all stages of production Advising on procedures to improve production efficiency Prepare and maintain test data for review Evaluate data and draft reports, noting any relevant deviations from existing standards Identify areas for quality control improvement and implement new methods accordingly Communicate quality or compliance concerns with urgency QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience (Desired): Technical Military MOS, trade school and/or degree Experience and/or education and internship in complex facilities or mission critical projects is preferred Any civilian or military technical certifications is a plus Experience with writing and enforcing standard operating procedures (SOPs) Solid understanding of test equipment & software Minimum of 5-9 years of inspection and/or production experience Strong working knowledge of various mathematical concepts including fractions, ratios, and proportions Demonstrated ability to work independently with minimal supervision Excellent organizational skills Demonstrated ability to analyze and interpret information Must be a US citizen Must be able to travel 70% Computer Skills: Advanced Excel skills preferred Experience using Microsoft Office Suite, Word and Microsoft Project Basic knowledge of systems design for various projects Certificates and Licenses: No certificates or licenses required Supervisory Responsibilities: No supervisory responsibilities for this position. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasionally lift and or move objects 10 to 50; Frequently required to stand, walk, stoop, kneel, crouch or crawl. The employee is occasionally required to sit and climb or balance. Specific vision abilities for this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust and focus. Noise Level can be moderate to high. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. CPG Participates in E-Verify #:LI-TG1 Pay Range: $74,851 - $112,222 per year Apply for this Position

Requirements Physical Requirements: Standing, sitting, walking, stooping, kneeling, climbing, feeling, talking, hearing and seeing Turning, twisting, bending, and balancing Pushing, pulling and reaching Must be able to lift and/or move up to 25 pounds and occasionally 50-75 pounds Job Requirements: Bachelor's degree in a Quality related field 5+ years of experience in quality inspection or an equivalent combination of education and experience Must have overall work process knowledge to support the development and maintenance of the quality management system Must have problem solving skills to apply methods for RCA (Root Cause Analysis). Understanding of DFMEA (Design Failure Mode Effect Analysis) and PFMEA (Process Failure Mode Effect Analysis) Knowledge of supplier manufacturing processes and required error proofing and other quality systems as needed to provide flawless quality Knowledge of regulatory requirements (NEC, NFPA, ATEX, IECEX, ISO, API, ASNT, ASME, AWS, etc.) Knowledgeable in ASME inspection process - incoming inspection, material certification and marking requirements and in-process inspection ASME Knowledge in code sections for hydrostatic testing and be able to generate ASME records (required data reports, shop travelers, etc.) ASME Section I, IV or VIII and B31.3 code knowledge along with AWS code specifications required Must be meticulous about capturing and retaining information Must have basic computer skills (Word, Excel, Record-keeping software, etc.) Must be able to work in a team environment and be able to explain issues clearly to team Must be analytical and detail oriented Must be able to pass pre-employment drug screen Must be able to pass a background check Desirable Experience, Education, and Training: Previous supervisory experience High School Diploma or equivalent preferred Tools, Equipment, and Technology: Computer Environmental Conditions: Manufacturing and fabrication shop environment Mix of shop floor and office/documentation work May require walking the yard, climbing stairs and inspecting large assemblies Englobal a Gulf Island Company will not sponsor applications for work visas. Additionally, applicants for employment with Englobal a Gulf Island Company, must be currently authorized to work in the United States on a full-time basis. Accordingly, Englobal a Gulf Island Company, will not consider applications from candidates who require the company to sponsor a work visa and who are not currently authorized to work in the United States on a full-time basis. Englobal a Gulf Island Company is not accepting unsolicited candidates from search firms for posted employment opportunities. Please no phone calls or emails. All resumes submitted by search firms to Englobal a Gulf Island Company, employees via email, the internet, or any other form and/or method without a valid written search agreement in place for the position will be deemed the sole property of Englobal a Gulf Island Company. No recruiting placement fee will be paid in the event Englobal a Gulf Island Company, hires the candidate due to the referral or through other means.

1. Perform in-process and final inspections on fabricated parts, weldments, assemblies, and structural components. 2. Verify dimensions using calipers, micrometers, gauges, tapes, weld gauges, and other precision measuring tools, prepare reports. 3. Review and interpret engineering drawings, welding symbols, fabrication standards, and customer specifications. 4. Review NDE reports, prepare ncr when necessary. 5. Ensure products meet quality standards, customer requirements, and regulatory codes. QUALIFICATIONS: 1. High school education or equivalent. 2. Ability to use appropriate measuring and test equipment. 3. Product familiarity working in a similar environment. TRAINING REQUIRED: 1. Strong attention to detail, accuracy and problem solving skills. Ability to read and interpret engineering drawings and specifications. 2. Performing dimensional inspections. 3. Experience with NDT methods. (VT, MT, PT) 4. Experience working with ITPs, MTRs and fabrication quality documentation PPE AND SAFETY: 1. Follow all shop safety policies, including PPE requirements. 2. Reasonable accommodations are made to enable

- Track, store and maintain part and product documentation in accordance with the Quality Management System - Propose improvements to the documentation management process - Communicate with internal customers to provide traceability and product documentation - Ensure all inspection and test activities are conducted safely. Participate in creation and review of HClientard Analysis and Risk Control for these activities. - Maintains HSE reporting requirements. - Inspect documentation, parts, components, materials, subassemblies and drilling equipment against written specifications. - Comply with applicable company written inspection procedures and standard work. - Perform manufacturing and engineering tests in compliance with applicable procedures and standard work. - Documents all deviations from engineering documents, inspection procedures and standard work. - Assist in designing tests and fixtures and their set-up. - When authorized, perform calibration of measurement systems. - Be familiar with inspection and test procedures, standard work and test plans, and provide input to continuously improve them. - Check that the assembly or production line adheres to standards and procedures. - Proposing improvements to the production process - Recording inspection results by completing reports, summarizing re-works into quality database **Responsibilities:** - Good written and verbal communication skills - Excellent problem-solving and analytical skills - Ability to use measuring devices like gauges, meters, calipers, and computers - Documentation and reporting skills - Attention to detail - Teamwork and collaboration - Actively working on the shop floor - Basic computer skills. **Experience:** - Entry level position 3-5 years of experience in quality. **Skills:** - Technology or Manufacturing - Non-Conformance Management - Documentation Management - Sub-arc welding inspection experience - Basic math skills - Excel knowledge - SAP knowledge - Visual Factory knowledge **Education:** -HSD **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Who We Are TEADIT Group is recognized worldwide as a leader in the development and manufacturing of innovative products for critical fluid sealing processes. The wide variety of sealing solutions developed by Teadit have been important tools for many industries including the Refining, Chemical Process, and Power Generation industries. Teadit has helped a number of industries achieve the goal of an emission-free environment within their facilities. Teadit is constantly investing in R & D to keep up with the evolution of the industry's needs. Teadit North America is located in Houston, Texas. Worldwide, we have locations in South America, Europe and Asia. The variety of sealing solutions developed by TEADIT is fundamental in order to achieve the leakage-free goal in the many industries we serve. The quality and effectiveness of these solutions are based on management and innovation, which are the basis for all products manufactured at any Teadit plant. As a result of this continuous process of quality improvement, an ISO 9001 certification was obtained in Brazil, the United States, and Europe. Every Teadit product is developed, manufactured and installed to achieve the goal of ensuring leakage control and environmental preservation. Who You Are The Inspector plays a key role in ensuring product quality throughout the production process by conducting inspections, confirming specifications, documenting nonconformities, and contributing to continuous improvement efforts. The ideal candidate will have experience with measurement tools such as calipers, micrometers, and tape measures. Applicants will be asked to complete a basic skills test to demonstrate their inspection abilities before being considered for the position. What You'll Do Confirm specification of product in process by conducting visual and measurement tests and communicating required adjustments to the production Lead. Approve finished products by confirming specifications, conducting visual and measurement tests, returning products for rework, and confirming rework. Document instances of nonconforming product. Follow operating instructions for all measurement equipment. Report needed repairs to equipment. Work with Warehouse and Production personnel to ensure that inspections, process control analyses, or audits are conducted on a continuing basis as specified to enforce requirements and meet specifications. Support and participate in the organization's continual improvement program to conform to ISO 9001:2008 requirements by complying with the Quality Policy and procedures and meeting QMS objectives. Other duties as assigned. What You Bring High school diploma or GED required. Relevant inspection experience may substitute for formal education. Minimum of 6 months in inspection experience required. Experience in an ISO-regulated environment is a plus. Ability to analyze information and inspection data. Strong documentation and reporting skills. Knowledge of standard quality control procedures. Ability to read safety rules, technical drawings, and procedure manuals. Physical & Safety Requirements Ability to sit, stand, walk, bend, and type for 8-10 hours/day. Ability to work overtime as needed. Must follow all safety and PPE requirements. Ability to lift 25 lbs regularly and up to 50 lbs occasionally. Reasonable accommodations may be provided for individuals with disabilities. Additional Qualities Detail-oriented and accurate. Safety-conscious. Able to work efficiently in a fast-paced environment. Supportive of innovation and continuous improvement. What We Offer Hourly pay rate: up to $23 per hour Benefits: Medical, dental, 401k Competitive paid time off #IND1

Full-time Description -Conduct daily quality inspections on automotive components and production parts. - Perform measurements, testing, and documentation in compliance with customer and IATF/ISO standards. - Support incoming material inspections and ensure suppliers' parts meet specifications. - Prepare quality reports, maintain inspection records, and escalate issues to engineers or supervisors. - Assist in root cause analysis and corrective action implementation under engineer's guidance. - Operate inspection tools such as calipers, micrometers, gauges, and CMM machines. Requirements Associate degree in a technical field. - 1-3 years of quality inspection experience in manufacturing, preferably in automotive or mechanical components. - Familiar with quality tools and basic problem-solving (e.g., 5 Why, Pareto). - Hands-on skills and attention to detail, willing to work on the production floor. - Basic computer and reporting skills (Excel, ERP systems).

Job DescriptionRole and ResponsibilitiesPassionate about quality and manufacturing excellence? Join our team as a Quality Technician and help ensure our products, processes, and systems meet the highest standards. Collaborate with engineering and operations to drive continuous improvement and deliver outstanding results. Responsibilities Conducted inspections, tests, and measurements to ensure products consistently met quality standards. Identified defects, documented trends, and recommended process improvements that enhanced efficiency and product reliability. Supported root cause analysis and implemented corrective actions, reducing recurring quality issues. Collaborated with cross-functional teams to maintain process compliance and streamline operations. Assisted in developing and maintaining quality systems and documentation, ensuring regulatory and customer standards were met. Monitored product and process performance, driving improvements in yield and consistency. Led continuous improvement initiatives to optimize processes and reduce waste. Ensured adherence to company and customer quality requirements, contributing to high levels of customer satisfaction. Qualifications and Education Requirements Associate or bachelor's degree in engineering, Quality, or related field preferred Hands-on experience in manufacturing or quality inspection Strong attention to detail and problem-solving skills Knowledge of quality standards (ISO, GMP, or similar) is a plus Excellent communication and teamwork skills Powered by JazzHR l3ywb5H2So

The Certification Technician role involves compiling, reviewing, and distributing final product certifications for Turbine and Energy products. This position requires proficiency in handling certifications, ADRs, cut verifications, and raw material certifications. The individual will also contribute to other responsibilities within the certification group. PRIMARY DUTIES AND RESPONSIBILITIES: • Compile, review, and distribute final product certifications for Turbine and Energy products. • Cover weekend certifications based on a rotating schedule, ensuring timely completion. • Create ADRs (Alloy Data records) and ZCMSs (Material Ordering documents) within the Oracle system. • Review, enter, and release Raw Material Certifications. • Perform Cut Verifications to ensure adherence to quality standards. • Review Powder Conformance packages for compliance with standards and specifications. REQUIRED SKILLS: • Proficient in MS office including outlook, excel, word • Ability to multi-tack in a fast-paced environment • Experience in Oracle or another ERP system is strongly preferred • Proficient with Adobe Acrobat • Knowledgeable on ISO 9000, AS9100, API certifications is a plus EDUCATION: • High school diploma at Min but would prefer some College EXPERIENCE: • 1-2 years of relevant experience preferred (This is flexible) WORK CONDITIONS: • Safety Gear: Requires the use of personal protective equipment (PPE) such as safety glasses, ear protection, and steel-toed boots. • Movement: Regular movement throughout the manufacturing floor, including standing, walking, and occasionally lifting up to 30 pounds. HOURS: 1ST SHIFT

Be Safe Always. Do the Right Thing. Provide Great Service. Take the Initiative. Be an Endless Learner.At Bayou Processing & Storage, these aren't just words, they're the foundation of how we operate every day. We're a trusted steel processing and storage company serving customers who rely on precision, safety, and quality. We're looking for a Quality Control (QC) Representative who takes pride in getting it right the first time. In this hands-on role, you'll inspect finished steel products, verify they meet customer specifications, and help maintain the high standards that make Bayou a leader in our industry. What You'll Do Inspect and measure finished steel products to ensure they meet customer and company quality standards. Identify, report, and document any non-conforming material or process issues. Prepare quality reports and inspection documentation with accuracy and detail. Communicate results and suggest corrective or preventive actions when needed. Label, package, and prepare materials for shipment to customers. Review outgoing shipments for accuracy and quality compliance. Safely operate forklifts, overhead cranes, and other equipment as required. What You Bring High attention to detail and commitment to safety and quality. Strong organizational and time management skills. Ability to read and interpret customer drawings and specifications. Familiarity with carbon steel plate, rolling, burning, and beveling preferred. Experience using measuring tools and completing quality documentation. Positive, team-oriented attitude with good communication skills. High School Diploma or GED required; 2+ years of quality inspection or related experience preferred. Physical Requirements Ability to lift up to 45 lbs. and remain on your feet for extended periods. Must wear required PPE (hard hat, safety glasses, steel-toe boots, gloves, hearing protection). Comfortable working around heavy materials and industrial equipment. Why Join Bayou Processing & Storage? At Bayou, you'll be part of a team that values integrity, safety, and continuous improvement. We invest in our people - offering opportunities to learn, grow, and take pride in meaningful work that keeps America's industries moving. Join a team that does the right thing, every time. Apply today and build your career with Bayou Processing & Storage.

Job Description The Customer Technical Quality Technician I (CTS - Tech One) is an entry-level, execution-focused role that supports customer quality claims and failure investigations. This position is responsible for hands-on laboratory activities, sample handling, first-level inspections, and accurate documentation to ensure timely, traceable, and high-quality analysis. This role does not own customer communication or root-cause conclusions but enables successful technical resolution through disciplined execution and evidence integrity. 2. Roles and Responsibilities: Sample Receipt & Traceability • Receive, register, label, and track returned customer samples immediately upon arrival. • Ensure full traceability and accurate data entry within the HDQ system. • Maintain organized storage of samples, test results, and documentation. First-Level Investigation (FLI) • Perform first-level technical inspections following defined procedures. • Conduct visual inspections, dimensional checks, and basic measurements. • Properly open samples using approved, non-destructive methods. • Capture clear, high-quality photographs and videos documenting findings. Documentation & System Support • Upload inspection results, measurements, photos, and notes into HDQ. • Support CTS Engineers with complete and accurate technical data. • Ensure documentation meets internal quality and audit standards. Laboratory & Equipment Support • Maintain cleanliness and organization of laboratory and work areas. • Ensure proper handling, calibration awareness, and care of tools and equipment. • Follow all safety, quality, and handling procedures. Collaboration & Development • Work closely with Customer Technical Quality Engineers and CTS leadership. • Support plant and technical center requests for additional inspection data. • Continuously develop technical knowledge of hose construction, fittings, and materials. 3. Qualifications & Skills: Required: • Technical diploma, associate degree, or equivalent hands-on technical experience. • 1-2 years of experience in laboratory, quality, manufacturing, or technical support roles. • Basic mechanical aptitude and familiarity with precision measurement tools. • High attention to detail and ability to follow standardized procedures. • Fluent in Spanish (spoken and written). • Valid passport with ability to travel throughout North and South America. • Basic proficiency in Microsoft Office (Excel, Word). Preferred: • Exposure to hydraulic hoses, fittings, or rubber products. • Experience working in a manufacturing, quality, or laboratory environment. • Bilingual

Role and ResponsibilitiesPassionate about quality and manufacturing excellence? Join our team as a Quality Technician and help ensure our products, processes, and systems meet the highest standards. Collaborate with engineering and operations to drive continuous improvement and deliver outstanding results. Responsibilities Conducted inspections, tests, and measurements to ensure products consistently met quality standards. Identified defects, documented trends, and recommended process improvements that enhanced efficiency and product reliability. Supported root cause analysis and implemented corrective actions, reducing recurring quality issues. Collaborated with cross-functional teams to maintain process compliance and streamline operations. Assisted in developing and maintaining quality systems and documentation, ensuring regulatory and customer standards were met. Monitored product and process performance, driving improvements in yield and consistency. Led continuous improvement initiatives to optimize processes and reduce waste. Ensured adherence to company and customer quality requirements, contributing to high levels of customer satisfaction. Qualifications and Education Requirements Associate or bachelor's degree in engineering, Quality, or related field preferred Hands-on experience in manufacturing or quality inspection Strong attention to detail and problem-solving skills Knowledge of quality standards (ISO, GMP, or similar) is a plus Excellent communication and teamwork skills

TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Quality Control Technician to join our team in Houston, TX. In this role you will ensure timeliness, completeness and accuracy of work performed by technicians. You will perform inspections post-install to ensure compliance to client specifications and complete reviews to ensure proper restoration of the area. You will be meeting at this address each day before going out to the work site: 13805 West Rd STE 100. Houston, Tx 77041 Why TAK? * Full Time * Paid Weekly * Compensation: $16 - $20 per hour, DOE * Full Benefits Package (Medical, Dental & Vision) * Paid Time Off * 401(k) with Company Match! * 25K Company Paid Life Insurance * Independent Work & Team Collaboration * Career Development & Advancement Opportunities! The Role * Ensures timeliness, completeness and accuracy of work performed by technicians * Performs inspections post install to ensure compliance to client specifications * Completes reviews to ensure proper restoration of area * Captures photos and attach to the inspection report * Performs white line excavations and collects locate data * Verifies the system is complying with all safety requirements * Performs work in a safe manner, following all OSHA and company guidelines * Prioritizes, organizes and efficiently completes tasks to meet deadlines * Works in a variety of outdoor environments * Drives Company vehicles responsibly and safely * Conducts and attends meetings as needed Requirements * 2+ years of telecommunications (i.e. cable, internet, telephone, wireless) industry experience required * Experience with quality control and verifications * Experience calling in Bluestakes a plus * Experience with underground locates and the ability to use a compass for directional instructions * Basic mechanical aptitude, ability to utilize hand tools for intended purposes * Ability to travel daily around to various work sites and open to a variety of schedules * Excellent customer service, time management, problem-solving and troubleshooting skills * Ability to learn and operate testing equipment and software/programs * Ability to utilize hand tools, identify wire size/color and accurately utilize measuring devices * Ability to carry, climb, operate, and work upon an extension ladder (approximately 28 feet high and 75 pounds) * Ability to complete work indoors, outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time * Ability to safely navigate various terrains, managing equipment and tools * A body weight of no more than 275 pounds to perform ladder work safely. Safety is our #1 Priority. If personal safety is not compromised, an accommodation may be available based on previous ladder experience in a similar role * Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving * Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting *****************************. Salary Description $16 - $20 per hour, DOE

SHIFT: Day /OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials for defects. The QC inspector will also be responsible for documenting inspection results, taking measurements, and tracking defects. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Reports to QC Lead person for daily activities Perform and document dimensional and visual checks of production parts and incoming goods. Responsible for notifying Quality Control Lead person, in addition to Manufacturing and Engineering, of non-conforming goods. Inspect customer-supplied inserts, per drawings supplied. Ring check and approve production tryouts to engineered tolerances. Inspection of buy-out materials. Make first-piece inspection and document ring checks. Shipping certifications. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminate waste. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Lead person Other Requirements An annual vision examination is required. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 4-5 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

The Quality Control Technician II will be responsible for all aspects of the quality programs and functions. These include maintaining all HACCP, food safety records, plant audits, mock recall programs and training the plant on these issues and procedures. Performs testing to validate the microbiological quality of current and new ingredients, suppliers, and packages. Provides test data to assure the production of high quality products. Tests current and new concentrate ingredients in process and finished concentrates, and beverages products in development and finished products. The QC Technician will also work with the R&D Team on new product launches. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Knowledge of all cleaning agents and applications, external, internal, cleaners, and sanitizers. • Properly document and follow all procedures set forth in the frequency guide and standards. • Ability to properly fill out batch reports, calculate variations in batch sizes, proper attributes, standards, and other data required on batch report documented per formula.• Ability to properly measure and follow proper mixing procedures.• Ability to evaluate and troubleshoot batch and make corrections.• Ability to perform all testing, evaluations, and documentation of results while following procedures.• Ability to troubleshoot and take corrective action on the line.• Ability to properly prepare batch tanks for batching, tank rinsing, tank sanitation, odor, and tasting.• Full knowledge and capabilities to perform internal pest control program, location of stations, checking and cleaning of stations, and proper documentation on hand of pest control program.• Assist supervisors in resolving Quality Control issues, tracking quality trends, recommending and implementing plans to improve quality and production efficiency.• Responsible for compliance with Federal and State legislation by establishing and enforcing quality standards; testing materials and product. • Ability to collect, analyze and summarize process quality information and trends. • Computer literacy required with proficiency in Microsoft Office products including Excel and Word. • Typically faces situations that have a variety of interpretations and require careful evaluation. LANGUAGE SKILLS:Ability to read, analyze, and interpret common information, reports and other documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or company representatives. Ability to effectively present information to management. PHYSICAL DEMANDS:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to walk, stand for long periods of time, sit and talk or hear. The employee frequently is required to use hands and fingers, to handle, or feel, sit for long periods of time, stand frequently, bend, squat, reach and turn to access files and office equipment. Must be able to lift up to 50 pounds. WORK ENVIRONMENT:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Field positions will be exposed to various unfamiliar conditions where Personal Protective Equipment (PPE) must be worn and which may include, but are not limited to manufacturing and warehouse plants, and other locations as directed by supervisor. The noise level in the work environment is usually moderate, but increases significantly in warehouse and manufacturing plants. MINIMUM QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • High School Diploma or GED preferred or equivalent experience. • 2-3 years hands-on work experience in the carbonated soft drink industry preferred.• Experience in quality control testing procedures and internal and external sanitation of beverage equipment with a clear understanding of all aspects of blending, product attributes recordkeeping, yields, etc.• Strong computer skills, including Microsoft business applications and various reporting software.• Exceptional interpersonal and verbal communication skills• Understands and can follow all OSHA required training.• Must be 18 years or older• Favorable background and drug exam. • Ability and willingness to work a flexible Full Time schedule that may include weekends and holidays.• Must be able to provide own transportation to various locations in organizational service areas, as required by duties.Shasta Beverages, Inc. provides equal employment opportunities to all applicants for employment without regard to race, color, religion, sex, national origin, age, disability, gender, genetics, gender identity, disabled veterans or sexual orientation.

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office & Onsite At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Champion Safety. Take an active role in prioritizing safety throughout the operation for yourself and others at all times in accordance with MSHA and Vulcan standards. Perform duties safely, responsibly, and proficiently. Oversee Projects. Conduct analysis of customer and job specifications. Assist in new product development. Oversee special, high visibility, or large projects. Train QC Personnel. Train QC department personnel in proper testing procedures within the lab and in the field to optimize team efforts and efficient performance. Conduct Testing. Inspect, sample, and conduct routine and special laboratory testing on construction materials in conformance with appropriate standard test methods. Perform tests to ensure quality of products during production, shipping, and at job sites. Review Test Results. Review, monitor, and maintain the test results of the data and adjust blends when required. Review material quality test results for conformance (per ASTM, AASHTO and appropriate DOT procedures) in order to meet Vulcan's standards for quality products. Communicate test results to supervisors, plant personnel, and plant site QC. Ensure proper documentation of results in the QC database. Prepare Reports. Prepare submittals for the various products. Prepare statistical summary quality reports on VMC Aggregate products. Troubleshoot. Perform troubleshooting of field and jobsite problems. Visually inspect material sources, stockpiles, and truck loads at Aggregate plants. Troubleshoot problem jobs and specifications. Champion Continuous Improvement. Stay abreast of professional and technical developments in order to maintain and improve the skills and knowledge needed for superior job performance and to help improve operational efficiency. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Education. Must have your high school diploma or its equivalent. Associate's or Bachelor's degree is preferred. Experience. Five years of construction materials testing experience in construction materials to include aggregates, asphalt, and ready mix concrete is preferred. Must possess superior working knowledge in at least one product line and have skill in all product lines. Testing Knowledge. Individual must be skilled in basic ASTM, AASHTO, and ADOT testing procedures applicable to our complete product line. Must be knowledgeable in product related specifications and finished products. Interpersonal Skills. Must have strong verbal communications skills for interacting with plant production personnel, plant managers, sales personnel, customers, and agency representatives. Analytical Skills. Skill in general statistical analysis, math, and engineering concepts is preferred. Must be proficient in Microsoft Office Suite, Google Drive, Oracle Business Environment, and other software packages relevant to the position. Time Management Skills. Must have the ability to perform material testing in an orderly, efficient, and accurate manner. Flexibility. Must be willing to work overtime and extended hours depending on customer and company demands. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. Ready to Drive. Must have a valid driver's license. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. We are an industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs, and helping our employees meet their goals, as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters.

Axiom Space is collaborating with Astrolab, Inc. to develop a Lunar Terrain Vehicle (LTV) for future Artemis missions, combining Axiom's advanced AxEMU spacesuit with Astrolab's FLEX rover to enable groundbreaking scientific exploration on the Moon's surface. This partnership reflects Axiom Space's broader mission to build era-defining space infrastructure that drives exploration and fuels a vibrant space economy that will empower our civilization to transcend Earth for the benefit of every human, everywhere. Axiom Space fosters a work environment inclusive of all perspectives. We are the pioneers of commercial space, leading the transformation of low-Earth orbit into a global space marketplace. Our mission-driven team is seeking a bold and dynamic Quality Technician who is fueled by high ownership, execution horsepower, growth mindset, and driven to understand our world, science/technology, and life itself, for the benefit of all on Earth and beyond. Employment in this role is contingent on Astrolab/Axiom being selected as a winner of NASA's LTVS contract. POSITION SUMMARY We are looking for a resilient, high-energy, experienced Quality Technician, with a good eye for detail. You will be responsible for performing standardized quality control checks on our company products to ensure they meet the required legal and company standards for safety and quality. You may also be required to maintain tool control records, calibrated test & inspection equipment, prepare test data, and identify areas for quality control improvement. Additional responsibilities may require you to operate company vehicles to store and transport materials and products. Lastly, you must be able to perform all tasks as directed by supervisor. KEY DUTIES & RESPONSIBILITIES Developing and maintaining company inspection reports Inspecting goods or products according to quality and safety standards across all stages of production Ensuring company tools and equipment are calibrated and working correctly Reporting quality anomalies to the supervisor Collating test data and drafting quality reports Identifying possible areas for improvement in quality control processes and implement new methods accordingly Comply with safety regulations and maintain clean and orderly work areas Urgently communicate quality, safety, or compliance concerns Communicating project progress, status, and potential issues to stakeholders and leadership Implementing and maintaining agile project management methodologies throughout the project lifecycle Perform additional job duties as assigned QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education & Experience High School diploma or GED Minimum of 5+ years of inspection experience; preferred 7+ years' experience Understanding of advanced mathematical concepts including fractions, ratios, and proportions Track record of delivering outcomes in ambiguous, fast-moving environments Uses good judgement to problem-solve proactively, positively impacting hard challenges Proven to deliver high quality results under tight deadlines Grit Passion for space and the mission Entrepreneurial, growth mindset Perseverance Resourceful, adaptable Skills GD&T experience Experience with Coordinate Measuring Machine (CMM) Advance Experience with Quality Inspection Tools Executes priorities with precision and pace High EQ and ability to collaborate within teams and cross-functionally Tech-savvy in using systems and tools to move faster and smarter Excellent written and verbal communication skills Competencies: Embody our core values of leadership, innovation, and teamwork. In addition, to perform the job successfully, an individual should demonstrate the following competencies: Accountability Sense of Urgency Extreme Ownership Execution and Delivery Efficiency Effectiveness WORK ENVIRONMENT: Generally, an office environment, but can involve inside or outside work depending on the task. Requirements Must be able to complete a U.S. government background investigation. Management has the prerogative to select at any level for which the position is advertised. Proof of U.S. Citizenship or US Permanent Residency is a requirement for this position. Must be willing to work evenings and weekends as needed to meet critical project milestones. Physical Requirements Work may involve sitting or standing for extended periods (90% of the time) May require lifting and carrying up to 25 lbs. (5% of the time) Equipment and Machines Standard office equipment (PC, phone, printer, etc.) Axiom Space is proud to be an equal opportunity employer. Axiom Space does not discriminate on the basis of race, regional color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with disability, or other applicable legally protected characteristics.

The Quality Control Inspector 1 supports the organization in the development, maintenance and execution of a quality control program that will allow the business to continually improve. In addition, the Quality Control Inspector 1 will help ensure that the supply being delivered from vendors and the product being shipped to customers meets the expected standards and specifications. Duties and Responsibilities: Inspect raw materials, machined, welded, and coated parts ordered and received at TEI (TRENDSETTER ENGINEERING, INC) headquarters from vendors and internal machine shop for quality and accuracy. Verify parts received against engineering drawings, specifications, and manufacturing records. Prepare electronic inspection reports for incoming products. Maintain incoming inspection log. Issue, document, and follow up on NCR's. Manage calibrated measuring equipment and certificate log. As necessary, perform other duties, requiring the same level of skill & responsibility. Support any new quality initiatives as required. Be familiar with company HSE (Health, Safety, and Environmental) policies and procedures. Share knowledge & best practice across the company. All other duties as assigned. Qualifications: Associate degree or at least 5 years of previous experience related to quality control inspection, preferably within the oil & gas industry. Advanced skills in dimensional measurement and verification, utilizing all necessary tools. Proficient computer skills and knowledge of Share point and Microsoft 365 required. Ability to demonstrate initiative and assertiveness, plan and organize work in an efficient manner, and work well under stress and time pressures. Strong interpersonal and communications skills, both verbal and written

Work days/Shift Hours - if applicable: 4:00 PM - 4:00 AM / 2-2-3 Flex Schedule. Compensation: Starting pay ranges from $22.46 to $28.14 per hour, based on experience. Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits. Additional Relevant Information: General Purpose Responsible for conducting qualitative and quantitative testing of raw materials and finished goods. Duties and Responsibilities Conduct qualitative and quantitative testing of beverages, syrups, and raw materials throughout the entire production process. Analyze syrup beverage and/or water attributes. Audit container rinsers, air blowers, filters, and coders to ensure proper operations. Conduct package quality inspection and quality audits and isolate product that does not meet standards. Receive and test CO2 and all raw materials prior to production process. Maintain highest possible housekeeping standards to prevent microbial contamination. Qualifications High School diploma or equivalent. Bachelor's degree in physical science and/or food industry experience preferred. 1-3 year of general work experience required. Prior food production operation experience preferred. Previous experience within high-speed industrial environment preferred. Ability to read and understand MSDS, operate manufacturing equipment, and knowledge of industrial technology a plus. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act and certain Texas or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on Coca-Cola Southwest Beverages. Please inform us at if you need assistance completing this application or to otherwise participate in the application process. Know Your Rights dol.gov Coca-Cola Southwest Beverages LLC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class.

-Conduct daily quality inspections on automotive components and production parts. - Perform measurements, testing, and documentation in compliance with customer and IATF/ISO standards. - Support incoming material inspections and ensure suppliers' parts meet specifications. - Prepare quality reports, maintain inspection records, and escalate issues to engineers or supervisors. - Assist in root cause analysis and corrective action implementation under engineer's guidance. - Operate inspection tools such as calipers, micrometers, gauges, and CMM machines. Requirements Associate degree in a technical field. - 1-3 years of quality inspection experience in manufacturing, preferably in automotive or mechanical components. - Familiar with quality tools and basic problem-solving (e.g., 5 Why, Pareto). - Hands-on skills and attention to detail, willing to work on the production floor. - Basic computer and reporting skills (Excel, ERP systems).