Quality technician jobs in Tuscaloosa, AL

Job Description A Quality - Visual Inspection Technician is a key member of the Quality Team and plays a critical role in ensuring that compounded pharmaceutical products are accurately prepared and without defects. Visual inspection is the first of several post-production activities where filled compounded products are visually evaluated for product defects. This technician is responsible for working with production and quality staff to prioritize batches for visual inspection, completing visual inspection of batches within reasonable timeframes, appropriately classifying observed defects, and performing additional pre-release inspections. While visual inspection is the main emphasis for this position, this position will also participate in other quality related tasks and duties. Job Activities and Responsibilities: The responsibilities listed below are subject to change. Post-Production Visual Inspection of Finished Drug Products Perform visual inspection of unlabeled finished drug products Classify observed defects into pre-defined categories Calculates percent defects on inspection results and reconciles components Proper documentation of visual inspection activities on associated compounding records in accordance with procedures, CGMP, and CGDP Labeling of Finished Drug Products Label all products following facility and regulatory requirements Perform post-labeling inspections Quality Control Functions and Tasks Perform environmental and personnel monitoring associated with batch production Conduct routine environmental monitoring of controlled compounding areas Record room conditions in appropriate monitoring software Other routine quality control tasks as determined by the Quality Management Quality Assurance and Compliance Adhere to FDA 503B guidelines, cGMP standards, and USP requirements to ensure product safety and quality. Follow established protocols for documentation, reporting, and record-keeping Safety and Facility Maintenance Follow safety protocols, including proper gowning, hand hygiene, and equipment sanitation Participate in routine facility cleaning schedules, ensuring a clean work environment Report any equipment malfunctions or safety concerns to supervisors Assist other process functions as required. Qualifications and Education Requirements Educational Background: High school diploma or equivalent; licensed as a pharmacy technician with the Alabama State Board of Pharmacy. Experience: Prior experience in a pharmacy, healthcare, or manufacturing environment, especially in sterile compounding or quality. Attention to Detail: Effective organization skills, attention to detail, and the maintenance of precise records. Physical Requirements: Ability to stand for extended periods, lift moderate weights, and work in a controlled environment; must have 20/20 vision either aided or unaided and complete inspection certification Must have the ability to complete a two-day off-site training program Physical Requirements: Proficient in using a computer and related equipment, including printers and fax machines. Ability to sit or stand for extended periods. Effective communication skills via telephone and email. Able to work in a controlled environment Capable of lifting up to 40 pounds as needed. 20/20 vision (with or without corrective aids) required for visual inspection of drug products, in accordance with legal requirements. KEY COMPETENCIES Regulatory Knowledge: Familiarity with FDA, cGMP, and USP guidelines is a strong asset. Visual ability to detect defects (as demonstrated through competency assessments) Collaboration: Works well with cross-functional teams, including quality control, shipping, and pharmacists. Regulatory Compliance: Strong understanding of 503B regulations and dedication to following all facility protocols. Benefits: Health care insurance (medical, dental, vision) Life Insurance Supplemental Insurance PTO 401K matching Sick leave

Purpose: To oversee the audits of process and products within the department to which they are assigned. This includes control plan audits and the verification of data taken on a daily basis to verify that process controls are being utilized Qualifications: High School Diploma or GED 3+ years' experience working in a manufacturing environment preferred Knowledge: Business Writing General Computer Operation Manufacturing Concepts High School Diploma Proficient in computer operation Proficient in Microsoft Office Applications preferred Good Communication Skills Planning and organizational skills Main Tasks: Interface with quality engineering functions to secure documentation needed for successful audits Daily process audits designed to verify the process controls in use are being utilized and functioning Process Audits Ensure specifications are met according to the Control Plan in assigned area Create and Follow up on Quality Alerts Assist with Containment when defects occur Download reading into the color care software Advise the color harmony team when the readings are out of tolerance Responsible for measuring orange peel and gloss using the Wave scan and Gloss meters Assist the Color Technicians when needed Perform related office and clerical functions such as, data entry and filing.

Quality Control focuses on process control and providing accurate feedback to internal customers. Responsible for the effective management and/or day-to-day supervision of quality control and inspection. Responsible for following implemented of standards, methods and procedures for inspecting, testing and evaluating the precision, accuracy, efficacy and reliability of products. Responsible for usage of software, hardware, materials, parts, and products to ensure adherence to established standards of quality. Responsible for defined product sampling and checks for non-conformity. Executes required inspections defined by sampling plans for product conformity with a focus on Customer satisfaction. Essential Duties and Responsibilities include, but are not limited to: • Inspect parts to ensure conformity to the customer requirement and to industry standards. These inspections include dimensional, visual, material handling, workmanship, paint applications, free of all FOD • Utilize various measuring tools, which includes manual measuring instruments, CMMs, mylars, visual measuring systems, etc. • Prepare, update, and inspect Company and Customer inspection records for accuracy, communicating as needed, clearly and concisely. • Actively contributes to a culture of continuous improvement • Other duties as assigned Qualifications: Experience and Education: 1-2 years of relevant experience High school degree or equivalent, plus advanced training Technical Skills: Excellent attention to detail Working knowledge of customer specifications and requirements Basic computer skills Problem solving abilities Strong verbal and written communication skills Ability to use measuring equipment Ability to work both individually and in a team environment Understand and obey safety requirements Commitment to keep work area clean and free of debris Physical Requirements: Must be able to lift and/or move up to 50lbs Specific vision abilities include close and distance vision, depth perception and ability to adjust focus Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time o Capable of standing for long periods Supervisory Responsibilities: None. Travel Required: N/A Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. Affirmative Action/Employment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company. We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law.

Quality Control focuses on process control and providing accurate feedback to internal customers. Responsible for the effective management and/or day-to-day supervision of quality control and inspection. Responsible for following implemented of standards, methods and procedures for inspecting, testing and evaluating the precision, accuracy, efficacy and reliability of products. Responsible for usage of software, hardware, materials, parts, and products to ensure adherence to established standards of quality. Responsible for defined product sampling and checks for non-conformity. Executes required inspections defined by sampling plans for product conformity with a focus on Customer satisfaction. Essential Duties and Responsibilities include, but are not limited to: • Inspect parts to ensure conformity to the customer requirement and to industry standards. These inspections include dimensional, visual, material handling, workmanship, paint applications, free of all FOD • Utilize various measuring tools, which includes manual measuring instruments, CMMs, mylars, visual measuring systems, etc. • Prepare, update, and inspect Company and Customer inspection records for accuracy, communicating as needed, clearly and concisely. • Actively contributes to a culture of continuous improvement • Other duties as assigned Qualifications: Experience and Education: 1-2 years of relevant experience High school degree or equivalent, plus advanced training Technical Skills: Excellent attention to detail Working knowledge of customer specifications and requirements Basic computer skills Problem solving abilities Strong verbal and written communication skills Ability to use measuring equipment Ability to work both individually and in a team environment Understand and obey safety requirements Commitment to keep work area clean and free of debris Physical Requirements: Must be able to lift and/or move up to 50lbs Specific vision abilities include close and distance vision, depth perception and ability to adjust focus Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time o Capable of standing for long periods Supervisory Responsibilities: None. Travel Required: N/A Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. Affirmative Action/Employment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company. We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law.

What we offer Explore a world of opportunities with us. Look ahead with us and help shape innovative solutions to make our world more sustainable and life healthier, more vibrant and more comfortable. At Evonik, you have the chance to explore, thrive, and grow alongside 33,000 colleagues. Among attractive career paths and high-quality development programs, we not only offer performance-based remuneration and occupational health benefits but also hybrid and flexible working environments with #SmartWork. Bring your fresh perspective, develop your strengths, break out your mold, and find a career that fits your dreams with us. Click on the link below to learn what our employees have to say about Evonik: ************************************************** The Manufacturing Specialist acts as primary production process owner and subject matter expert (SME) for assigned manufacturing area(s) which include manufacturing processes in Parenteral Commercial Manufacturing Operations (CMO). Responsibilities may include unit operations, processes, and combinations of both. RESPONSIBILITIES Responsibilities include cGMP process and batch execution in clean room manufacturing activities. Responsible for manufacturing related regulatory compliance (FDA, EMA, IPEC, ISO, etc.), adherence to company and departmental goals and objectives, GDP activities, maintenance outages, etc., training of front line personnel, interaction with other department leads and company management, CMO readiness and process transfer, Leadership and accountability in the areas of manufacturing safety, training, environmental compliance, and area housekeeping. Development of new training materials and maintaining current curricula for operational staff. May require additional support activities for interaction with clients and / or client representatives (site tours, face-to-face client meetings). Support, training, and accountability in the area of regulatory compliance (FDA, EMA, IPEC, ISO, etc.) and standard operating procedures. Manufacturing specialist is responsible for workcell / shift execution readiness including but not limited to batch ticket readiness, change control, document revision, material issuance, process order control, batch issuance; in process real time process monitoring, batch ticket review, process performance trending / reporting; post process continuous improvement through after-action review and other process improvement duties as needed to achieve functional objective and targets. Seek out and identify opportunities for improvement in the areas of GMP document management, training, execution, deviation causal factors, and product release. Contribute to Departmental metrics data entry; Area and unit operation process performance trending/reporting. Develop and lead manufacturing initiatives such as operational improvement projects, and technical/operational capability support to business line and product line leaders. Own and lead customer process validation efforts from concept to closure. Own and sustain process transfers and customer product lifecycle. Own and lead integration efforts of new processes into the cleanroom. Execution of validation IOQ's, PPQ, or other validations with minimal assistance from process engineering and validation. REQUIREMENTS BA/BS Degree in STEM subject (0-2 years experience) preferred. Relevant industry experience in pharmaceutical and/or chemical industry with production/manufacturing experience is required for higher level Specialist assignments. Competent level understanding of operational requirements for cleanrooms in highly regulated environment pharmaceutical. Knowledge of the scientific principles pertaining to standard processing and manufacturing equipment including, but not limited to, extruders, pumps, stirred-reactors, filtration devices, hot oil systems, cooling systems, grinding mills, pelletizers, fillers, etc. Excellent written, verbal, organizational, and people skills. Excellent leadership skills. Ability to multi-task and manage complicated, dynamic manufacturing activities in multiple locations on time and on/under budget while also managing other job-related tasks/activities. Ability to interact and communicate effectively with production operators and senior management regarding aspects of past, present and future manufacturing unit operations and improvements. The Evonik Group adopts an Equal Employment Opportunity (EEO) approach. Candidates are assessed based on their educational qualifications, experience, job competencies and potential and shall not be discriminated against on the basis of race, ethnicity, age, gender, religion, nationality, disability or sexual orientation or other classifications protected by local, state, or provincial regulations. Your Application To ensure that your application is proceeded as quickly as possible and to protect the environment, please apply online via our careers portal. Further information about Evonik as Employer can be found at *************************** Please address your application to the Talent Acquisition Manager, stating your earliest possible starting date and your salary expectations. Your Talent Acquisition Manager: Kelvin Seals [C] Company is Evonik Corporation

HI, Hope you're doing well This is Pankaj from 4P Consulting please see below job description Job Title :: QC2- Quality Coordinator 1 or 2 Contract :: 36-Months Estimated Start Date :: 1st July 2024 Notes :: If interested please share these details Work Authorization, Current Location, expected rate? Skills and Responsibilities · previous experience working with cameras, knowledge of the NESC electrical system, Special Notes · Is this position supporting a government-related project? Yes · Does this position require driving (excluding commute)? Yes · Does this position require personal protective equipment (PPE)? Yes Thanks and Regards Sr. Talent Acquisition Specialist Pankaj Mishra ********************************* ***************

A Birmingham-based leading dental implant and biologics group is looking to add an organized and attentive Manufacturing Technician to their team. This position will work Monday-Friday from 2:00 PM - 11:00 PM. Essential Duties and Responsibilities: Execute strategies to maintain quality and consistency of manufactured products Use developed machining strategies, fixtures, and tooling for production Communicate with management on workflow and capacity Ensures established turnaround times for products are achieved Perform CAM processing of dental protheses per customer specifications Participates in CAM production-related qualifications including Installation, Operation, and Process Validations Works with outside suppliers as needed Qualifications: Strong computer skills required Machining background desired (preferable Haas controls) Must be comfortable in production environment where production quotas are mandated Experience with working within a Quality System preferred Education and/or Experience: High school Diploma Required Dental Lab/medical device experience preferred CNC Machining experience desired (Haas controls preferred) ***********************This position works from 2pm-11pm********************** Contract assignment is approximately 3 months with opportunity for permanent hire based on proven work performance, reliability, and initiative.

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. What You'll Do: Ensure Quality Control. Conduct routine testing of in-process materials, raw materials, environmental samples, and finished materials to ensure quality control of products at the point of production, shipping, and arrival upon the job site. Adhere to testing methods, including American Society for Testing and Materials (ASTM), American Association of State Highway and Transportation Officials (AASHTO) and Department of Transportation (DOT). Document and Report Information. Complete all required reports in a timely and accurate manner, interpreting, documenting, and storing the results. Communicate test results in a timely manner to the supervisor and properly document in a database. Maintain Lab Standards. Ensure housekeeping standards are maintained in and around the lab. Troubleshoot problems and review basic product specifications. Inspect, calibrate, and maintain testing equipment periodically. Monitor Stockpile. Inspect stockpiles, materials sources, and truckloads at plant sites. Monitor the daily construction of the stockpile to ensure that segregation and contamination is kept to a minimum or eliminated. Notify management immediately if contamination is identified. Inspect Equipment and Structures. Conduct routine inspections of the plant equipment in order to ensure safe, reliable, and compliant operations to maximize production and minimize interruptions. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Prior training or experience in the materials testing field is preferred. Knowledge of general principles and practices of aggregate production is preferred. Safety Knowledge. Must display knowledge and awareness of construction and mining site hazards. Math Skills. Must possess good math skills and demonstrate the ability to perform simple to moderately complex arithmetic calculations. Technology Skills. Must have the ability to use computerized equipment and technology. Must be proficient in Microsoft Office Suite, Google, Oracle Business Environment, and other software packages relevant to the position. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets up apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters.

Job DescriptionQuality Control Technician - Refractory Manufacturing Are you detail-oriented, skilled at spotting issues before they become problems, and passionate about keeping operations running smoothly? Crucial Link is working with a leading refractory manufacturer to find a Quality Control Technician who takes pride in precision and consistency. What You'll Do: Measure, inspect, and verify refractory products for accuracy and quality Identify and document defects or inconsistencies Determine whether products are acceptable, repairable, or non-conforming Perform necessary repairs or rework as needed Maintain accurate inventory and records Audit quality checks performed by other departments Approve labeling and packaging before shipment You'd Be a Great Fit If You: Have excellent attention to detail and problem-solving skills MUST be comfortable w/reading & interpreting blueprints Have prior experience in quality control or industrial/manufacturing settings Enjoy working in a team that values precision and efficiency (Bonus) Have experience with refractory materials or similar products What's in It for You: Competitive pay Opportunities for growth and advancement Supportive, team-oriented work environment Partner with Crucial Link to connect with top employers in the industry Pay range $20-24 per hour

JOIN MAYFIELD AND TURN YOUR WORLD YELLOW! Mayfield Dairy Farms is committed to operating at the highest level of character and accountability. Our most successful team members support and contribute to our commitment to a Culture of Excellence. Simply stated, we strive to do the right thing, we do our very best, and we treat others with respect! Mayfield Ice Cream is looking for a dynamic Lab Technician to join our Food Safety & Quality Assurance team! Are you passionate about ensuring top-notch quality and safety? Do you thrive in a fast-paced environment where attention to detail is key? As a key player in our production process, you'll be responsible for conducting rigorous quality and safety tests on our delicious ice cream products, utilizing your expertise in food science or biology. From analyzing samples to maintaining meticulous records, you'll play a vital role in upholding our high standards of excellence. If you have a degree or coursework in food science or biology, along with experience in food and beverage manufacturing, we want to hear from you! Join us in creating smiles and spreading joy, one scoop at a time. Apply now and be a part of the Mayfield Ice Cream family!

Job Description ***********PLEASE READ BELOW***************** Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations Check/inspect manufactured parts or products for defects Read and follow work instructions and general processes Use measuring or testing equipment as needed Ensure products meet quality standards Display excellent customer service Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management Collect and record data Technical Utilize company portal for time recording and policy acknowledgements Other Any other duties as assigned Knowledge, skills, abilities Hard skills Requirements Must be able to speak and read in the English language Good communications skills Must be able to multi-task Ability to work in a fast-paced environment Ability to handle sensitive and confidential material Ability lift /move 50 pounds Must have reliable transportation

Quality Assurance Technician I (AL1) Fairfield, AL, United States (On-site) TrendingJob DescriptionHWI has a fantastic opportunity to join our Quality Team as a Quality Assurance Technician I. The Quality Assurance Technician I plays an integral part in the safe and successful production of refractory brick products at HarbisonWalker Internationals Fairfield plant. This role is responsible for performing quality assurance functions including, but not limited to the inspection of in-coming raw materials and in-process materials checks to assure conformance to specifications and quality/process control procedures. The Quality Assurance Technician I is responsible for documenting the batching, mixing, and manufacturing process, ensuring product consistency and quality, and the final inspection of finished products, prior to shipment to the customer. In addition, the Quality Assurance Technician I maintains a clean and safe work environment as well as maintains professional working relationships with co-workers. Responsibilities Performing physical testing on final monolithic refractory products to confirm products conform to specifications and meet established HarbisonWalker International and customer standards Performing inspection and testing of raw materials to assure conformance to specifications quality/process control procedures; performing in-process testing to ensure product acceptability Recording and maintaining test results and verifying conformance to standards Preparing certificate of analysis or other quality reports Maintaining lab testing and analysis equipment Performing plant product and process quality observations and recording outcomes Requirements Requires high school diploma or G.E.D equivalent Strong computer skills and previous experience using on-line work order/preventive maintenance tracking system Requires interpersonal skills in dealing with coworkers, contractors and vendors Understanding of basic safety/OSHA standards Ability to operate and maintain laboratory instruments Requires math, analytical and problem-solving skills The Quality Assurance Technician I requires zero (0) - two (2) years of manufacturing and/or manufacturing Quality Assurance Technician experience; preferably in a refractory (or similar) operation. Physical and Environmental Requirements Physical Activity: Requires more than 2/3 of time using hands/fingers to handle and/or feel and talking/hearing; 1/3 to 2/3 of time standing, walking and reaching with hands and arms; and less than 1/3 of time sitting, climbing/balancing, stooping, kneeling, crouching, crawling, tasting and smelling. Lifting: Requires lifting to 50 pounds 1/3 to 2/3 of time. Vision: Requires accurate close and distance vision, color vision, peripheral and depth perception and the ability to focus. Environment: Requires more than 2/3 of time working in wet or humid conditions; 1/3 to 2/3 of time working near moving mechanical parts and exposed to fumes or airborne particles; and less than 1/3 of time in an office setting with very limited exposure, exposed to toxic or caustic chemicals, at risk of electrical shock or vibration. Noise: Requires exposure to moderate noise. About UsHWI, a member of Calderys HWI is the largest supplier of refractory products and services in the United States. With manufacturing sites and distribution centers across the Americas, as well as the major refractory industry research facility in North America, HWI serves virtually every major industry that requires refractory solutions to enhance production and protect assets. HWI is consistently recognized for its talented experts, industry firsts, and intensely driven excellence. We're actively expanding our team of dedicated, enthusiastic people - particularly in research and development, engineering and manufacturing, product management, and sales. As a dynamic, growing global refractory leader, we offer competitive compensation, benefits packages, and wellness programs. As an Equal Opportunity Employer, we are committed to a diverse workforce. For more information, visit *********************

HWI has a fantastic opportunity to join our Quality Team as a Quality Assurance Technician I. SummaryThe Quality Assurance Technician I plays an integral part in the safe and successful production of refractory brick products at HarbisonWalker Internationals Fairfield plant. This role is responsible for performing quality assurance functions including, but not limited to the inspection of in-coming raw materials and in-process materials checks to assure conformance to specifications and quality/process control procedures. The Quality Assurance Technician I is responsible for documenting the batching, mixing, and manufacturing process, ensuring product consistency and quality, and the final inspection of finished products, prior to shipment to the customer. In addition, the Quality Assurance Technician I maintains a clean and safe work environment as well as maintains professional working relationships with co-workers. Responsibilities Performing physical testing on final monolithic refractory products to confirm products conform to specifications and meet established HarbisonWalker International and customer standards Performing inspection and testing of raw materials to assure conformance to specifications quality/process control procedures; performing in-process testing to ensure product acceptability Recording and maintaining test results and verifying conformance to standards Preparing certificate of analysis or other quality reports Maintaining lab testing and analysis equipment Performing plant product and process quality observations and recording outcomes Requirements Requires high school diploma or G.E.D equivalent Strong computer skills and previous experience using on-line work order/preventive maintenance tracking system Requires interpersonal skills in dealing with coworkers, contractors and vendors Understanding of basic safety/OSHA standards Ability to operate and maintain laboratory instruments Requires math, analytical and problem-solving skills The Quality Assurance Technician I requires zero (0) - two (2) years of manufacturing and/or manufacturing Quality Assurance Technician experience; preferably in a refractory (or similar) operation. Physical and Environmental Requirements Physical Activity: Requires more than 2/3 of time using hands/fingers to handle and/or feel and talking/hearing; 1/3 to 2/3 of time standing, walking and reaching with hands and arms; and less than 1/3 of time sitting, climbing/balancing, stooping, kneeling, crouching, crawling, tasting and smelling. Lifting: Requires lifting to 50 pounds 1/3 to 2/3 of time. Vision: Requires accurate close and distance vision, color vision, peripheral and depth perception and the ability to focus. Environment: Requires more than 2/3 of time working in wet or humid conditions; 1/3 to 2/3 of time working near moving mechanical parts and exposed to fumes or airborne particles; and less than 1/3 of time in an office setting with very limited exposure, exposed to toxic or caustic chemicals, at risk of electrical shock or vibration. Noise: Requires exposure to moderate noise.

Quality Control Technician - 250002TZ Description Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. What You'll Do: Ensure Quality Control. Conduct routine testing of in-process materials, raw materials, environmental samples, and finished materials to ensure quality control of products at the point of production, shipping, and arrival upon the job site. Adhere to testing methods, including American Society for Testing and Materials (ASTM), American Association of State Highway and Transportation Officials (AASHTO) and Department of Transportation (DOT). Document and Report Information. Complete all required reports in a timely and accurate manner, interpreting, documenting, and storing the results. Communicate test results in a timely manner to the supervisor and properly document in a database. Maintain Lab Standards. Ensure housekeeping standards are maintained in and around the lab. Troubleshoot problems and review basic product specifications. Inspect, calibrate, and maintain testing equipment periodically. Monitor Stockpile. Inspect stockpiles, materials sources, and truckloads at plant sites. Monitor the daily construction of the stockpile to ensure that segregation and contamination is kept to a minimum or eliminated. Notify management immediately if contamination is identified. Inspect Equipment and Structures. Conduct routine inspections of the plant equipment in order to ensure safe, reliable, and compliant operations to maximize production and minimize interruptions. Additional Responsibilities. Other duties as assigned. Qualifications Skills You'll Need: Experience. Prior training or experience in the materials testing field is preferred. Knowledge of general principles and practices of aggregate production is preferred. Safety Knowledge. Must display knowledge and awareness of construction and mining site hazards. Math Skills. Must possess good math skills and demonstrate the ability to perform simple to moderately complex arithmetic calculations. Technology Skills. Must have the ability to use computerized equipment and technology. Must be proficient in Microsoft Office Suite, Google, Oracle Business Environment, and other software packages relevant to the position. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets up apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters. Job: Quality Control Primary Location: Alabama-Bessemer Organization: GM - AL Schedule: Full-time Job Posting: Oct 17, 2025, 8:10:12 PM

Classification: Exempt Reports to: Quality Manager Direct Reports: NA The Quality Inspector is responsible for performing random inspections in manufacturing departments for in-process and final inspection verification purposes. Performing mini audits throughout the facility to ensure proper identification of raw and finished goods in accordance with the lot traceability and control procedures. Essential Functions/Duties Perform all duties with a safety-first mindset Perform random inspections in manufacturing departments to ensure products are being manufactured correctly according to work orders and drawings provided. Ensure that each department is inspecting parts properly using gages and instruments available. Review in-process inspection records and confirm results recorded by machine operators. Perform mini-audits to ensure lot traceability is maintained throughout the manufacturing process - ensure that every bin or pallet of in-process material always has proper identification back to the work order. Perform mini audits of raw material to ensure each mill tag displays a label to show that it has been properly inspected prior to use. Make sure all gages and instruments used in manufacturing processes are in calibration and if not, bring them to the quality lab to bring current. Work closely with other members of the quality team as well as manufacturing as required to ensure production of high-quality products. Perform other tasks as instructed by quality manager or quality engineer. Competencies Ability to maintain positive relations within all levels of the organization. Ability to communicate, present facts and provide recommendations effectively in oral and written form. Strong organizational skills that reflect the ability to perform and prioritize multiple tasks seamlessly with excellent attention to detail. Proven ability to handle confidential information with discretion, adapt to various competing demands, and demonstrate the highest level of service and response. Ability to work effectively with or without direct supervision as well as independently or in a team environment. Ability to maintain a high degree of professionalism while under pressure and in the face of adversity Work under critical deadlines and heavy workloads to support the critical functions of the company. Ability to prioritize and work with accuracy under stress. Must have a solid working knowledge in Microsoft Word, Excel and Outlook applications. Physical/Cognitive Demands Cognitive abilities required include deductive reasoning, information ordering, oral comprehension, oral expression, problem sensitivity, written comprehension, and written expression. Position Type/Expected Hours of Work This is a full-time position. Required Education and Experience HS Diploma/GED Prior quality inspection experience in manufacturing environment Proficient in MS Office programs, especially MS Excel Preferred Education and Experience N/A Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice.

The Quality Inspector I, works independently as part of the Quality team inspecting parts. It is the responsibility of the Quality Inspector to communicate inspection results to management as well as Research and Development and Materials Management. Responsibilities: Inspect device components and finished devices follow inspection instructions and established procedures Communicate inspection results to Quality supervision or management as well as R&D / Engineering and Materials Management Filing quality documents and records and maintaining quality files Requirements: Previous hand-held inspection instruments (micrometer, calipers, etc.) preferred Experience with computerized record-keeping (e.g., documents, drawings) preferred Computer literacy with standard software applications, and demonstrates excellent reading, writing and verbal communication skills Requires vaccination against Hepatitis B or signed declination form High school diploma or certificate required 1+ years of Quality Inspection experience preferred

QUALITY CONTROL INSPECTOR, Royal Switchgear Manufacturing Company Take your next career step at Royal Switchgear Manufacturing Company with a US based team that is developing responsive solutions for an evolving grid. RSMC is a leader in engineering, designing, and manufacturing critical componentry for electrical substations and the broader grid. Our pride lies in our long-standing partnership with utilities companies, the reliability of our products, and the technical and hands-on capabilities of our team. The company is at an exciting inflection as we continue to expand our existing brand portfolio and deepen relationships with new and existing customers. The Quality Control Inspector checks the quality of incoming and outgoing products for Royal Switchgear by conducting tests, monitoring production processes, and validation of product to written standards and identifying non-conformances. LOCATION: Fully Onsite - 4251 Turin Dr, Bessemer, AL 35020 BENEFITS Health, Vision, and Dental Flex Spending and Health Savings Accounts Life Insurance 401(k) with 3% company match Employee Assistance Program (EAP) Paid Time Off & Holiday Pay Referral Bonus Program Weekly Perfect Attendance Gift Cards Tuition Reimbursement WORK SCHEDULE Monday - Thursday: 6am - 4:30pm Friday: 6am - 2:30pm Saturday (as needed): 6am - 11:30am Candidates must be able to work up to 6 days per week with Saturdays scheduled on an as-needed basis. ESSENTIAL DUTIES AND RESPONSIBILITIES Inspecting products to ensure that they meet quality standards, approving or holding product as required per inspection standards. Performing testing to ensure conformance. Monitoring production operations to ensure conformance to company specifications. Directing assembly adjustments to ensure operations reflect quality standards Communicating the results of inspections and putting forward corrective suggestions. Completing required documentation/paperwork as directed for assigned position to support Royal Switchgear requirements. Controlling of non-conforming parts and products. Working under the direction of a group leader. Responsible for continually maintaining a clean and safe work environment. Following written and verbal instructions. QUALIFICATIONS & ATTRIBUTES High School diploma/GED required. Minimum of 2 years' proven experience as a Quality Control Inspector preferred. Ability to read and interpret small print on gauges, blueprints, or product labels. Ability to detect small defects in parts or products through visual inspection. Strong regard for quality assurance according to company standards. Excellent oral and written communications skills. Proficiency in reading engineering documentation; prints, drawings, and bills of material. Proficiency in using inspection tools; angle gauge, tape measure, and calipers. Proficiency in computer word processing and Microsoft Office applications. Good knowledge about industry products and processes. Basic mathematical arithmetic skills. Basic presentation and reporting skills. Good team player who can work efficiently with minimal supervision. WORKING CONDITIONS The work condition characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Work primarily takes place in a warehouse environment. May encounter occasional stressful situations. Work may include responding to critical customer driven situations which may result in working some weekends, holidays, and after normal business hours. PHYSICAL REQUIREMENTS The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Maintain clear and accurate records. Understand and follow oral and written directions. Work regular shifts to include evenings; weekends; and/or holidays as assigned. Must possess general manual dexterity to operate computer, equipment, tools, controls, or other objects; reach with hands or arms. Must possess mental acuity for attention to accuracy and detail. Must see in the normal visual range with or without correction. A vision exam will be conducted annually. Must hear in the normal audio range with or without correction. EQUAL OPPORTUNITY EMPLOYER We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to actual or perceived race, color, religion, creed, national origin, citizenship status, age, disability status, genetic information, sex, sexual orientation, gender identity or expression, pregnancy, marital status, veteran status, or any other characteristic protected by applicable federal, state or local laws.

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. The Quality Technician is responsible for assisting in administration of the quality functions at a site to assure adherence to ISO 9001, ISO 13485, MDSAP, FDA 21 CFR Part 820/211, EU MDR and other applicable regulatory standards. You will support manufacturing and servicing operations by assisting in performing and documenting problem-solving investigations and conducting in-process sub-assembly and final QC product acceptance testing. Quality Technicians assist in identifying and documenting process and product non-conformances. They work with operations team members to perform and document problem-solving investigations. In addition, Quality Technicians may review device history records, authorize release of finished product/processes and execute calibration and environmental monitoring processes. This is a day shift position, Mon-Fri, 8am-5pm. Can include overtime and occasional Saturdays. Facility is climate cooled. What You'll Do as a Quality Technician • Assist in production line Quality investigations and associated problem-solving activities. • Will coordinate and conduct in-process and final QC product acceptance testing, depending on facility. • Investigates production line stoppages to identify corrective actions. • Participates on a Material Review Board to review and process non-conformance reports. • Enters and retrieves Quality data from local and global systems. • Verifies calculations, dose ranges, dosimeter placements and special instructions prior to processing and part of final product release. • Complete other duties as assigned. The Experience, Skills and Abilities Needed Required: • Minimum of three (3) years of experience in a manufacturing or repair environment or other technical production tasks with a high school diploma or equivalent. • Minimum of one (1) year of experience in a manufacturing or repair environment or other technical production tasks with an associate degree. • Familiarity working with and using a microscope. • Experience working with a Quality Management System (ISO 13485). • Experience using basic hand tools i.e., utility knife, screwdrivers, hammers. • Proficiency using MS Office including Work, Excel and Outlook. • High level of professionalism, good communication skills, able to work individually and as part of a team. Preferred: Knowledge of metrology (mics, calipers, gauges). Ability to sit and stand for long periods of time. What STERIS Offers We value our employees and are committed to providing a comprehensive benefits package that supports your health, well-being and financial future. Here is a brief overview of what we offer: • Market Competitive Pay with shift differential ⦁ Climate controlled facility • Extensive Paid Time Off and (9) added Holidays • Excellent Healthcare, Dental and Vision Benefits • Long/Short Term Disability Coverage • 401(k) with a company match • Maternity and Paternity Leave • Additional add-on benefits/discounts for programs such as Pet Insurance • Tuition Reimbursement and continued education programs • Excellent opportunities for advancement in a stable long-term career #LI-KL1 Pay rate for this opportunity is $21.50 $25.00 per hour. This position is eligible for bonus participation. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity.

Job Description The Quality Technician ensures that all compounded products are manufactured in accordance with current Good Manufacturing Practices (GMP) and also meet all internal specifications. This position is responsible for performing a number of manual and automated quality assurance checks on in-process products and finished goods. This position requires strong organizational skills and the ability to prioritize work and respond to customer demands in a timely fashion are critical requirements of this position. This position is responsible for working collaboratively with other personnel in the Quality Department to ensure the highest quality product is delivered to the consumer. Job Activities and Responsibilities: Collect and send samples of compounded sterile preparations (CSPs) for sterility, potency, and endotoxin testing. Conduct environmental monitoring (e.g., air and surface sampling) in cleanrooms to ensure compliance with regulatory standards. Perform visual inspection of finished drug products. Maintain incubation schedules of environmental monitoring sample plates and document results in associated reports and batch records. Maintain accurate and thorough records of all testing and inspections. Ensure all documentation complies with FDA 503B regulations, USP standards, and internal SOPs. Review batch records and verify that all procedures were followed correctly. Assist in internal and external audits to ensure compliance with FDA regulations, USP , USP, and other applicable guidelines. Work closely with the Quality Assurance (QA) team to implement corrective and preventive actions (CAPAs) when non-conformities are identified. Maintain effective communication and partnership with Operations Management department. Participate in root cause analysis to find the sources of defects or quality problems. Ensure that all QC laboratory equipment is properly calibrated and maintained according to the manufacturer's specifications. Review of draft and executed batch records, release of pharmaceutical products, and QA review and approval of product label proofs. Participate in continuous improvement initiatives to enhance the quality control processes and overall product quality. Provide input on QC methods and assist in the development of new testing procedures as needed. Assist with SOP training, personnel training and competency assessments for handwashing/garbing and training of quality technicians. Train other staff members on QC procedures and best practices. Stay current with new regulations, guidelines, and techniques related to quality control in 503B compounding Oversight of validation projects (i.e. equipment, facility, methods, and process), deviation investigations, and CAPA and Out of Specifications (OOS) investigations. Ensure all QC activities comply with FDA 503B requirements and other relevant regulatory bodies. Prepare and review QC sections of regulatory submissions. Under the direction of supervisor/lead, document, initiate, and investigate quality events for deviations and noncompliance. Conduct internal audits and gap analysis of processes, systems, and procedures. Assist with external, regulatory inspections. Maintain quality records (equipment calibration and maintenance, training, deviation and noncompliance investigations, environmental monitoring, Certificate of Analysis, clean room certification etc.). Maintain quality standards by approving incoming materials, in-process production, and finished products. Receive, store, and log in samples for testing analysis. Participate in investigations into any deviations, out-of-specification results, or product complaints. Collaborate with QA to resolve issues and prevent recurrence. Other duties, responsibilities and qualifications may be required and/or assigned as necessary. Qualifications and Education Requirements Compounding, cGMP, and/or laboratory experience preferred High school diploma required and Associates or Bachelor's degree in Health Sciences/Microbiology preferred Must be able to follow gowning/garbing procedures including wearing all protective gear (gown, hair bonnet, mask, beard cover, gloves, goggles) as outlined in site SOPs Strong written communication and interpersonal skills. Demonstrated ability to work in a demanding, high performance work environment and create a positive, team-oriented culture. Must be well organized and detail-oriented with proven initiative and self-starter skills. Must possess problem solving and analytical skills Demonstrated ability to direct individuals and delegate responsibilities and tasks Excellent work ethic, including a personal drive to excel independently. Solid PC skills including Microsoft Office Suite (Word, Excel, Outlook) 20/20 Vision (either aided or unaided) as required by CGMP regulations for visual inspection of finished drug products. Physical requirements: Ability to use a computer and computer-related equipment, printer/fax machine Prolonged periods of sitting and/or standing. Communicate by telephone and email Lift to forty (40) pounds at times. 20/20 vision (either aided or unaided) Benefits: Health care insurance (medical, dental, vision) Life Insurance Supplemental Insurance PTO 401K matching Sick leave