Ready Pac Foods jobs

The Opportunity: Avantor is seeking a Maintenance and Reliability Supervisor to oversee facility maintenance activities. The Maintenance Supervisor's work involves complete maintenance control over designated areas and they will report to the Reliability Maintenance Engineering Manager. This is a full-time position based out of our Carpinteria, CA office with occasional travel to support other sites as needed. What we're looking for: Education: HS diploma or equivalent degree. A degree in mechanical, instrument/electrical, or another relevant discipline (preferred). Experience: Minimum of 5 years' experience in facility maintenance. Certifications: Certification in Reliability (CRL, CMRP, etc.) desired. Additional Qualifications: Must understand the RCM process, Failure Mode Identification, Defect Analysis, Cause and Effect Analysis, Loss Elimination, use sFMEA, RCFA Decision Logic, and FRACAS. Must understand ISO 55000 Asset Management. Expertise in CMMS best practices. Full understanding of strategic maintenance planning and scheduling activities Management and leadership skills. Budget planning skills. Good communication and reporting skills. Ability to communicate/teach/coach reliability best practices, condition monitoring, and precision methods. How you will thrive and create an impact: Supervise and ensure the safety of Maintenance employees. Oversee all maintenance activities in their area of the facility. Perform routine and turnaround maintenance and plant modifications. Evaluate and analyze products, components, materials, and equipment for the purpose of understanding and predicting failures. Review product designs, material specifications, and manufacturing capability to predict reliability and dependability. Create prototypes and conduct product tests to gather reliability data. Interpret test results and recommend solutions using appropriate statistical distributions and reliability models. Recommend product design changes or alterations in manufacturing processes and controls to ensure achievement of required reliability levels. Monitor production equipment diagnostics and review maintenance record in order to predict and prevent equipment down times. Document findings, including results of root cause analysis, and facilitate the implementation of necessary changes to ensure product and/or equipment reliability levels are maintained. May determine maintenance requirements and schedules for products and equipment. Ensure maintenance resources provide an effective, efficient, and cost-effective execution of maintenance schedules across the work area. Manage the area maintenance budget. Account for the maintenance functions in their area and take necessary action to ensure that key performance targets are met. Ensure that workforce is allocated to areas of responsibility in the most effective manner. Ensure supervisory support is provided to carry out Weekly, Daily, and Shutdown Schedules. Monitor key performance indicators (KPIs) and take appropriate corrective action. Approve purchase requisitions for direct purchase of materials promptly. Monitor execution of best practices to ensure compliance and take appropriate corrective action as necessary (with Operations Management). Follow up on Root Cause Analysis (RCA) recommendations to ensure corrective actions are taken promptly (with Operations Management). Define priorities for the area (with Operations Management). Define and update the 12-Month and 8-Week Event Schedules (with Operations Management). Identify work (early) to be done during scheduled shutdown events. Identify appropriate goals and objectives for each shutdown. Other duties as assigned. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer. Why Avantor? Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science. The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor. We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today! Pay Transparency: The expected pre-tax pay for this position is $85,000.00 - $141,600.00 Actual pay may differ depending on relevant factors such as prior experience and geographic location. EEO Statement: We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at ****************************** and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. For more information about equal employment opportunity protections, please view the Know Your Rights poster. 3rd Party Non-Solicitation Policy: By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27882 Purpose To provide technical and process support for PC Board manufacturing operations. Job Duties and Responsibilities Provides technical and process support related to PC Board production, prototype, and process development. Uses schematics, diagrams, written and verbal descriptions or defined plans to perform testing and troubleshooting on electronic or mechanical components, equipment or systems. Gathers, maintains, formats, compiles and manipulates technical data using established formulae and procedures and performs detailed mathematical calculations. Address concerns reported through employee suggestion and near-miss systems. Encouraged to initiate changes for continuous product and process improvement. Basic Requirements Minimum of a high school education or GED is required. Minimum 5 years of work experience or Associate Degree in related field. Rotational availability between 1st and 2nd shift is preferred. Has full proficiency in a range of technical processes or procedures (or deep skills in a single area) through job-related training and considerable work experience Completes a variety of atypical assignments Works within defined technical processes and procedures or methodologies and may help determine the appropriate approach for new assignments Works with a limited degree of supervision, with oversight focused only on complex new assignments Acts as an informal resource for colleagues with less experience Effective written and oral communication skills. Strong desire to take ownership and drive results. Ability to analyze data to drive decision making. Good organizational skills and computer skills. Proficient in the use of MS Office including but not limited to Word, Excel, PowerPoint. On an as needed basis, train, assist and observe other department personnel (as qualified) on the department equipment and/or process for improvements such as but not limited to safety, quality, ISO 14001 & 45001 and manufacturing proficiency/efficiency. Environmental Health & Safety (EHS) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS and JHA procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS procedures are contained in reference books such as SSW Specifications, Plant Rules and Regulations. Safety Data Sheets are stored electronically and available 24/7. In an emergency SDS may be accessed at Security. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS and JHA procedures. Personal Protective Equipment: See Department PPE Chart Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Administration Target Bonus: % Req ID: 27692 Purpose To provide the overall safety and security of our employees, guests and facilities. Job Duties and Responsibilities Monitor access control systems for all employees and guests, verify credentials, issue temporary I.D. badges. Monitor all fire and security alarm systems for the Mentor facility. Only corporate monitors the sales offices and distribution centers. Mentor only monitors Mentor. Constant monitoring of all radio communications. Act as the companies 911 (2222) (6222) emergency response center. Act as Incident Command emergency dispatch center for critical incidents. Dispatch ETM's for emergency response on critical incidents. Coordinate with local police and fire for critical incident emergency response. Patrol property, enforce parking guidelines, monitor surveillance equipment and inspect buildings. Fill in at the truck entrance to cover vacations and call offs. Inspect vehicles entering restricted areas, verifying shipping and receiving papers and assign proper docks. Issue gate passes and properly scale raw material and scrap. Monitor railroad traffic entering and exiting the property. Provide for the overall safety and security of company employees, guests and assets. Interpret and enforce company and departmental policies and procedures. Irregular work schedule required. Effectively represent the company to all guests. Perform other duties as assigned by the Manager of Security. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Basic Requirements Minimum 2 years security experience is preferred. Excellent organizational skills. Highly motivated, quick learning, quality conscious and have the initiative to take ownership. Excellent verbal and written communication skills. Very alert and able to act calmly and decisively under stressful conditions. Able to work well with people in all areas and levels of the company. Able to work rotating shifts, holidays, and weekends as required. Excellent attendance and "on time "record required. Able to walk up to two miles per shift and climb steps. Must possess a valid Ohio driver's license. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Research & Development Req ID: 27300 Purpose To design, develop and evaluate welding machines and associated processes; to conduct applied research into new areas of welding machine design and/or on new welding processes. Job Duties and Responsibilities Utilizes and applies experience in a broad range of fields to understand weld machine development process and interactions between machine design and weld process development/optimization; collaborates with team members and members of the department, providing the benefit of this understanding to enhance the execution of projects Develops new welding machines, software, welding processes and/or test methodologies in accordance with company policies/procedures and in consideration of: Market needs, requiring direct interface with customers, sales and marketing Industry codes, standards, and specifications, and Manufacturing process capabilities, requiring direct interface with manufacturing and methods personnel Establishes standards and methodologies for and conducts evaluations of product performance Develops/refines test methods, as applicable, to support new product development, product evaluations, and competitive benchmarking Facilitates development of manufacturing process capabilities to support introduction of new products Works with minimal direct supervision, conferring with superiors as needed; has appreciable latitude for independent action or decision May provide task oriented direction to Technicians, Technologists and/or Engineers Level I/II/III in the execution of development projects Structures projects for and provides supervision and mentoring to Engineering Interns Maintains records of all work in process and documents interim/final results in the applicable format; these include Project Definitions, Milestone Plans, ES Reports, Technical Reports, Project Tracking Progress Reports and presentations at meetings, seminars, and conferences Basic Requirements Baccalaureate degree in Engineering (or equivalent). Degree in Welding Engineering preferred. Minimum 8 years engineering experience. Processes and applies a broad knowledge of engineering and scientific principles, practices and procedures, within the field of specialization, to the completion of difficult assignments. Computer literate with working knowledge of MS Word, MS Excel, MS Access and MS PowerPoint, as a minimum. Possesses and applies both practical and fundamental understanding of various arc welding processes. Experience with Robotic Programming. Experience with numerical modeling tools including Python is a plus. Excellent written and verbal communication skills. Works effectively in a cross-functional team environment Job Rate: Salary Grade ***The established grade and range for this job is listed above. All applicants should understand that, if selected for a posted job, the actual pay rate will generally fall within the range of the stated grade. Most typically, the pay rate will be set towards the lower end of the range and may vary slightly, depending upon candidate qualifications. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: Min: 63,800 - Mid - 88,800 Bonus Plan:Profit SharingProfit Sharing % Req ID: 27257 What You Will Do As an Electrical Engineer, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and maintain National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education and Experience Requirements This position is posted as a range, candidates with varying levels of experience and qualifications are encouraged to apply. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Minimum requirements, Engineer II - Bachelor's degree in electrical engineering with 3+ years of professional relevant engineering experience. Experienced Professional - Has working knowledge and experience in own discipline Continues to build knowledge of the organization, processes and customers Performs a range of mainly straightforward assignments Uses prescribed guidelines or policies to analyze and resolve problems Receives a moderate level of guidance and direction Engineer III - bachelor's degree in electrical engineering with 5+ years of professional relevant engineering experience Senior "Go To" / Career Level Person - Has in-depth knowledge in own discipline and basic knowledge of related disciplines Solves complex problems; takes a new perspective on existing solutions Works independently; receives minimal guidance May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives Acts as a resource for colleagues with less experience May represent the level at which career may stabilize for many years Engineer IV - bachelor's degree in electrical engineering with 8+ years of professional relevant engineering experience. Lead/Specialist - Is recognized as an expert in own area within the organization Has specialized depth and/or breadth of expertise in own discipline or function Interprets internal or external issues and recommends solutions/best practices Solves complex problems; takes a broad perspective to identify solutions May lead functional teams or projects Works independently, with guidance in only the most complex situations Experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Req ID: 26432 PURPOSE: Electrically troubleshoot, repair and maintain complex production equipment and systems. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts, on-call. Daily work activity is directed by the Group Leader and a Machine Repair electrician A. Reports directly to the department Manager. JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES): Performs all task under general supervision. Provides training and assistance to less experienced Electricians. Assumes high level ownership during off-shift work periods related to work prioritization, production needs, and safety requirements. Troubleshoot, inspect, adjust, and repair automated machines, process systems, and robotic systems to ensure they are working properly and safely. Performs preventative maintenance and repairs on equipment and systems (e.g., mechanical, electrical). Evaluates and recommends equipment improvements to improve availability, capability and yield. Performs equipment failure analyses (including preventative and unscheduled maintenance). Assists engineers in operating test equipment to obtain performance data on parts and assemblies under varying operating conditions. Collects, compiles and summarizes test data, and reviews results with engineering to resolve problems such as product or equipment issues, malfunctions and incomplete test data. Diagnoses test equipment malfunctions, and services and repairs equipment as required. Diagnose malfunctions and analyze results using testing devices, then repair and replace broken machine components Troubleshoot, repair, inspect, and maintain combustion systems. Responsible for continuing education to keep up with changing technology. Configure, commission, and test new equipment while making sure all maintenance and installations are well-documented, working properly, and operating safely. Document repairs for regulatory purposes. Perform bench work in repairing and maintaining production equipment and spare part assemblies. Oversee maintenance contract and service work as assigned. Order and maintain spare parts. Assist with keeping neat and orderly records on work performed. Work with Engineering, Production Team Leads, Manager, Group Leaders, and coworkers to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, ability to be on-call and must be able to work weekends, off shifts, and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Assist in procedure/equipment upgrades as necessary. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager. May be asked to rotate between Mentor and Euclid facilities based on job training requirements. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. BASIC REQUIREMENTS: Must have successfully completed an Electrician Apprentice Program, an Associate degree/certificate in Electronics/Electrical Technology, or have equivalent job experience. Must pass the skilled trade assessment test for this position. Must have a basic knowledge of electrical troubleshooting. Some knowledge of combustion and/or hydraulic systems may be required. Must have a basic knowledge and experience in relay logic, industrial controls, electronics, and PLCs. Must have a basic level of knowledge and experience reading electrical schematics, wiring diagrams, ladder logic, and engineering drawings. Must have a basic ability to use a computer to communicate with machine control systems and PLCs. Must have a basic ability to diagnose the root cause of a problem, make repairs, and test for proper operation. Ability to use various measuring devices (multi-meter, oscilloscope, megohmmeter, etc.) Excellent attendance required. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Be mechanically inclined. Must be able to work in confined areas, climb ladders, and work at heights of 30 feet. Must be able to wear a respirator. Must be able to distinguish colors used in color-coding wires and electronic components. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Employment Status: Salary Full-Time Function: Engineering Pay Grade and Range: US10-E-26 (Min $52,300 - Mid $66,700$52,300.00 - $81,100.00) Bonus Plan: Profit Sharing Profit Sharing Target Bonus: Hiring Manager: Charles Allen Johnson Recruiter: Allison Schock Internal Candidate Eligibility Criteria: 1. Is a Lincoln Electric employee with at least 1 year of service 2. Is NOT on an active Performance Improvement Plan (PIP) Purpose A skilled, proactive, detail-oriented technologist who supports efforts to improve production equipment reliability and operational performance. Works with Maintenance and Plant Engineers to implement maintenance strategies, gather data, and apply methods to help reduce downtime and maintain efficiency. Contributes to reliability initiatives by developing procedures and providing technical support, ensuring consistent execution of engineering-driven plans. Job Description Support maintenance on complex repair issues. Provide documentation and suggest training to enhance workforce capabilities. Investigate alternatives to high-cost wear items and repair parts, including substitutions, new materials, and methods. Support root cause analysis of recurring equipment failures and assist in the implementation of corrective actions. Implement and support predictive technologies to reduce unplanned downtime, including procedures and documentation. Optimize and recommend preventative maintenance programs, ensuring correct tasks and frequencies are documented and followed. Assist engineering with equipment modifications, new designs, and capital project justifications. Champion and educate benefits of predictive maintenance across multiple technical and operational departments. Basic Requirements Bachelors of Science in Engineering Technology Degree in related field w/ 5+ years related experience. 5-10 years of experience with manufacturing equipment, with a focus on maintenance and reliability. Experience in industrial environments. Experience with predictive maintenance technologies and computerized maintenance management systems (CMMS). Proficiency in reliability tools and methodologies. Strong data analysis skills using tools like Excel, Power BI, or statistical software. Ability to interpret failure data and develop actionable insights. Skilled in conducting root cause analysis and implementing corrective actions. Ability to manage multiple projects and priorities effectively. Experience in planning and executing reliability improvement initiatives. Strong organizational skills and attention to detail. Excellent written and verbal communication skills. Ability to work cross-functionally with maintenance, production, and engineering teams. Capable of communicating technical findings and recommendations to cross-functional teams, including Maintenance, Production, Manufacturing, and Engineering. Excellent written and verbal communication skills. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

ESSENTIAL DUTIES AND RESPONSIBILITIES Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, lift gates, etc.). Perform preventative maintenance within DOT standards. Receive road calls, assign third party vendor, and work with business partners on plan of action. Maintain a clean and safe work environment in compliance with workplace safety rules/regulations and government guidelines. Utilize fleet maintenance software system tablet to fully document equipment repair and parts used. Backup to other maintenance shop personnel. Willingness and capacity to assume increased responsibility and certificates. Other duties as assigned by manager. SUPERVISION: N/A RELATIONSHIPS Internal: All Fleet Technicians, Drivers, Coordinators and Manager External: Vendor service providers when required WORK ENVIRONMENT Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility. Must be willing to work in extreme temperatures and weather conditions. MINIMUM QUALIFICATIONS Must have 3 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. Diagnostic and troubleshooting competency relating to equipment repairs. Successfully demonstrated independent analytical and problem-solving skills. Prior experience in administering appropriate PM program. Must furnish own personal hand tools. Able to read and write legibly (e.g., to attend trainings, hold conversations, receive safety and job-related coaching, and enter information on reports if needed); basic mathematical skills (add, subtract, divide). EDUCATION High school diploma or equivalent required. CERTIFICATIONS/TRAINING N/A LICENSES Must possess a valid driver's license. PREFERRED QUALIFICATIONS Valid Class-A CDL license and DOT certification Experience using fleet maintenance software Welding ability PHYSICAL QUALIFICATIONS OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: CONTINUOUSLY WALK: CONTINUOUSLY DRIVE VEHICLE: FREQUENTLY SIT: FREQUENTLY LIFT 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): FREQUENTLY Over 100 lbs (Very Heavy): OCCASIONALLY CARRY 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): OCCASIONALLY PUSH/PULL 1: FREQUENTLY CLIMB/BALANCE 2: FREQUENTLY STOOP/SQUAT: FREQUENTLY KNEEL: FREQUENTLY BEND: FREQUENTLY REACH ABOVE SHOULDER: FREQUENTLY TWIST: FREQUENTLY GRASP OBJECTS 3: FREQUENTLY MANIPULATE OBJECTS 4: FREQUENTLY MANUAL DEXTERITY 5: FREQUENTLY 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $33-$36per hour. This role will also receive overtime compensation Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Research & Development Req ID: 26380 Summary Lincoln Electric has an outstanding opportunity for a Pilot Plant Technician. The Pilot Plant Technician plays in integral role in supporting our consumable product development and certification through prototype production and routine product performance evaluations using established procedures and work practices. Report to Consumable R&D Managers or their designees. In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits! What You Will Do • Manufactures small batches of experimental welding consumable products, provides feedback on manufacturability to engineers and scientists • Provides technical support to engineers and scientists in areas such as operations, maintenance, safety, testing, process improvement or product development. • Gathers, maintains, formats, compiles and manipulates technical data using established formulas and procedures and performs detailed mathematical calculations. • Conducts and documents a variety of standardized tests; prepares routine test specimens using established procedures and/or drawings; sets up and operates standard test equipment; records test data • Responsible for executing work in accordance with instructions provided • Performs additional tasks as required by engineers or supervisor • Responsible for the safe operation, cleanliness and routine maintenance of all assigned laboratory equipment • Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Education & Experience Requirements • Vocational Training and 5+ years' experience required; or Associates Degree in related field; or High School Diploma (or equivalent) and 7+ years' experience in related field. • Has working knowledge and skills to perform a defined set of analytical/scientific methods or operational processes; Mechanical Aptitude a plus • Applies experience and skills to complete assigned work within own area of expertise • Works within standard operating procedures and/or scientific methods • Works with a moderate degree of supervision • Demonstrated ability to follow detailed instructions and maintain neat, accurate records • Proven ability to work independently and as a part of a team with minimal supervision • Ability to develop a positive and cooperative work environment with colleagues and supervisors • Excellent communication skills, both verbal and written • Ability to lift up to 60 lbs. on a regular basis Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Planning Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that can achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Comp: $85,000-100,000k/yr This is a Dayshift Position Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis, MDI and Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate “required to operate” and “required on roles” staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills Diversity & Inclusion: MCC fosters an inclusive culture that respects and embraces our teammates' diverse backgrounds and experiences, so that everyone can achieve their full potential here. We aspire for our company to truly reflect the diversity of our customers and the markets we serve. We are committed to equal opportunity for everyone, regardless of peoples' gender identity/expression, age, language, sexual orientation, ability, race, socioeconomic status, national origin or other characteristics. #LI-ML1 #appcast For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Req ID: 26988 Overview We are seeking a talented and driven Embedded Software Engineer with expertise in Linux systems to join our innovative team. This role blends embedded application development, platform engineering, board support package (BSP) maintenance, and hardware bring-up. You'll collaborate with cross-functional teams to create secure, high-performance software for Linux-based embedded systems. Key Responsibilities Embedded Application Development Design, develop, and maintain applications for embedded Linux environments. Write clean, efficient code in C, C++, and Python. Implement and optimize device drivers, APIs, and middleware. Conduct system-level debugging, performance optimization, and troubleshooting. Create and execute test plans to ensure functionality, reliability, and quality. Partner with QA teams for seamless deliverables. Platform Engineering & BSP Maintenance Maintain and update BSPs across diverse hardware platforms. Work with hardware teams to develop, validate, and configure drivers, kernels, and bootloaders. Lead hardware bring-up for new designs, ensuring smooth software-hardware integration. Security and Compliance Embed security best practices throughout the software stack. Perform vulnerability assessments and risk analyses. Collaborate with security experts to resolve incidents and uphold compliance standards. Collaboration & Mentorship Partner with hardware, firmware, and QA teams to define requirements and solve challenges. Mentor junior engineers and contribute to team knowledge-sharing. Qualifications Bachelor's degree in Electrical, Computer, or Software Engineering (or related field); advanced degrees preferred. Level III: 5+ years of relevant experience. Level IV: 8+ years of relevant experience. Hands-on experience in embedded Linux development, including kernels, drivers, and applications. Strong knowledge of Linux kernel architecture, system calls, and bootloaders. Proficiency with version control systems (e.g., Git) and collaborative workflows. Familiarity with networking protocols, communication interfaces, and embedded hardware. Excellent problem-solving, debugging, and communication skills. Preferred Qualifications Experience with real-time operating systems (RTOS) and low-level programming. Expertise in Yocto Project, OpenEmbedded, and cross-compilation tools. Knowledge of Agile/Scrum methodologies. Background in safety-critical or security-focused systems. Contributions to open-source embedded or Linux projects. Understanding of digital electronics and hardware design. At Lincoln Electric, we invest in your growth through ongoing training, competitive benefits, and a collaborative culture that rewards initiative. Ready to power up your career? Apply now and help us weld the future. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Quality Assurance/Control Req ID: 26627 Summary Join Lincoln Electric, a global leader in welding and cutting solutions, as an Electrical Quality Engineer at our Euclid manufacturing headquarters. You'll play a critical role in ensuring the highest quality standards for printed circuit boards (PCBs), power electronics, and finished products by identifying risks, driving continuous improvement, and preventing defects. Why Lincoln Electric? Highly competitive compensation + lucrative profit-sharing plan Student loan repayment assistance + tuition reimbursement Comprehensive medical, dental, and vision coverage 401(k) with generous company match Paid time off, holidays, and excellent work-life balance Stable, growing company with a 129-year legacy of innovation What You Will Do Support the design, calibration, and continuous improvement of electrical test systems and processes Provide expert electrical troubleshooting and guidance for PCB manufacturing (SMT, through-hole, and power electronics) Perform root cause analysis (8D, 5-Why, fishbone, etc.) and implement corrective/preventive actions Develop, improve, and audit quality control procedures for electrical systems and components Drive Lean and Six Sigma initiatives to reduce defects, scrap, and rework Train and mentor production and quality teams on troubleshooting, auditing, and best practices Collaborate cross-functionally with Manufacturing, Design Engineering, and Supplier Quality teams Education & Experience Requirements Required Bachelor of Science in Electrical Engineering (or closely related field) Strong foundation in quality tools, Statistical Process Control (SPC), and continuous improvement (Lean, Six Sigma) Ability to read schematics, interpret data, and use electrical test equipment (oscilloscopes, multimeters, etc.) Excellent problem-solving, communication, and teamwork skills Level-Specific Requirements Engineer I - 0-2 years of relevant experience Entry-level role with mentorship from senior engineers; ideal for recent graduates Engineer II - 3+ years of relevant experience Independent contributor with proven ability to lead projects and collaborate effectively Engineer III - 5+ years of relevant experience Autonomous leader capable of guiding projects, mentoring others, and driving strategic improvements Preferred Skills & Experience Hands-on experience with PCB manufacturing processes (SMT placement, reflow, wave soldering, AOI, ICT, flying probe) Knowledge of electrical test methodologies, data acquisition, and test equipment calibration Experience troubleshooting analog/digital circuits and power electronics Six Sigma Green Belt or Black Belt certification Familiarity with ISO 9001, IATF 16949, or similar quality management systems Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 27359 Primary Function Analyze, review and repair failed PC Boards and AOI. Responsibilities Understand and perform associated quality procedures used to process items in work center. Repair and rework assembly line and in-process PC board failures. Repair and rework in-process AOI or X-Ray failures. Identify and enter PC Board failure information and accountability into MES. Comply with Plant Rules and Regulations, Factory, and Operation specifications. Follow all applicable ESD procedures. Obtain and return SMT components from / to fixed location. Operate AOI equipment as trained. Sort PCB assemblies as acceptable or need repair. Able to utilize X-Ray equipment to determine defects/solder abnormalities. Notify placement equipment operators of upstream issues. Notify QA personnel and MAS of processing / operator errors and issues discovered. Notify scheduler, MAS, and QA personnel when high percent of failures are occurring. Interact with Supervision, Maintenance, Manufacturing Engineering, R&D and Plant Engineering to resolve equipment, procedural, and/or finished assembly problems. Cross training of employees to provide flexibility will be required. Skills and Aptitude Have excellent people, organizational and communications skills. Must have an uncompromising attitude towards quality. Excellent attendance, safety and work record. Must be self-motivated. Working knowledge of production and manufacturing floor control systems. Knowledge of Excel spreadsheets, MS Access database and Word application. Ability to lift 60 pounds on an occasional basis. Must be knowledgeable of quality procedures used in the manufacturing department and how they relate to the needs of the customer. Safety, workmanship, product quality and productivity in the performance of the job. May require shift rotation. Must be knowledgeable on soldering as dictated by QC-306. Training The Supervisor/Manager shall determine when an individual has completed the training and is qualified to assume these responsibilities. The Supervisor/Manager shall ensure that the employee receives “on the job training”, and the following training at the appropriate times. See Lincoln specification RE150 for training requirements. Environmental, Health, and Safety Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS, and JHA procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS procedures are contained in reference books, such as SSW Specifications, Plant Rules and Regulations, and Material Safety Data Sheets, which are located in the Foreman's area. Immediately notify the Production Team Lead if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS, and JHA procedures. Make sure all containers of chemicals used for this job are compatible with the material in the container and are properly labeled with a GHS label and stored per company policy when not in use. Make sure all equipment spills, leaks and chemicals are properly contained and cleaned up and trouble call entered for repair. Best efforts shall be used to reduce, reuse or recycle waste while performing the duties and/or tasks associated with this job and segregate waste per company policy. Participants in EHS initiatives as required by department and employee objectives and goals. Personal Protective Equipment Safety glasses with side shields Safety toe, ESD work shoes Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Req ID: 26208 Summary Lincoln Electric has an exciting opportunity for a Robotic Automation Engineer. The Robotic Automation Engineer will implement and support automated processes to drive improvements in safety, ergonomics, quality, productivity and cost reductions. The role heavily focuses on robotic solutions that often integrate with other types of equipment and at times can also involve non-robotic automation. The successful candidate will have a strong hands-on background in robotic system implementation and able to lead automated solution projects through all process steps including but not limited to conceptualizing automated systems, quoting, obtaining funding, managing projects, reporting progress, acceptance testing, installation, startup, and process support. In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits! What You Will Do • Identify and conceptualize primarily robotic and at times other forms of automated solutions to drive improvements in safety, ergonomics, quality, productivity, and cost reductions throughout the Machine Division. • Coordinate with vendors to quote and size automated systems. • Manage projects from start to finish including Capital Appropriation Requests with project budgets, savings, ROI, timelines, runoff criteria, status reporting, system implementation, and all other project details. • Program robotic systems, provide support and troubleshooting of existing robotic systems. • Design customized fixturing and workholding for automated systems using Solid Edge. • Create procedures, documentation, routings, and other necessary documentation for the manufacturing process. • Collaborate and communicate cross functionally with all levels of the organization including but not limited to pieceworkers, R&D, QA, Supply Management, production departments, and executive management. • Serve as the technical expert in robotics. Mentor and train others in the technical aspects of robotic systems. • Other assignments as assigned by the supervisor. • Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Education & Experience Requirements • Bachelor's degree from an accredited college in Engineering or related discipline. • Minimum 8 years professional and on hands experience with robotic systems. Robotic welding experience is a plus. • Proficient in conceptualizing automated solutions and implementing robotic and automation equipment. • Proficient at higher level programing of Fanuc robots for purposes of auto recovery and other more complex routines. • Excellent organizational skills as well as written and oral communication skills. • Possess and apply strong problem solving skills with an analytical approach and attention to detail. Ability to apply continuous improvement methodology to solve real world problems. • Ability to handle a variety of assignments and changing priorities. • Excellent computer skills with proficiency in higher level functions of Microsoft Excel, Word, and Power Point. • Ability to work effectively and efficiently independently, cross functionally, or part of a team. • Possess and apply a broad knowledge of engineering and scientific principles, practices and procedures. • Solid modeling (CAD) experience with the ability to conceptualize and design components such as fixturing for automated solutions. • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed. • Able to gather data and analyze it to make good fact based decisions. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Research & Development Req ID: 27658 Summary The Lincoln Electric Company is seeking an Electrical Engineer for our Euclid, OH world headquarters. The Electrical Engineer plays a key role in the electrical design, development, and support of Lincoln's DC Fast Charger, one of our newest product lines. You will help drive the future of clean energy solutions by contributing to the development of DC Fast Chargers (DCFC) for electric vehicles (EV) team. In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits! What You Will Do Electrical Design & Development: Design and implement electrical systems and circuits for DCFC products, including but not limited to magnetics, circuit boards, wire harnesses, and integration with software controls. Engineering Support: Lead and manage activities related to outsourced electronic assemblies and components. Cross-Functional Collaboration: Work closely with software/controls engineers to integrate electrical and software systems effectively, ensuring seamless product development. Thermal & Mechanical Design Support: Partner with mechanical engineers to ensure that electrical and thermal requirements are addressed within the mechanical packaging and system design. Regulatory Compliance: Navigate and ensure compliance with relevant regulatory standards and guidelines to ensure that all designs meet or exceed safety and performance requirements. Manufacturing & Testing: Collaborate with manufacturing engineers to define policies and processes for building and testing high-power EV chargers, ensuring product quality and manufacturability. Problem-Solving & Troubleshooting: Analyze and resolve technical issues related to product failures, driving root-cause analysis and corrective action. Required Experience & Education Bachelor's degree in electrical engineering or related field. Level II Engineer 3+ years of hands-on engineering experience in electrical design. Level III Engineer 5+ years of hands- on engineering experience in electrical design. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences. Technical Expertise: Strong understanding of electrical design principles, circuits, power systems, and system integration. Experience with high-power electronics and DC fast chargers is desirable but not required. Communication Skills: Excellent written and verbal communication skills, with the ability to present complex technical concepts to cross-functional teams and stakeholders. Collaboration & Independence: Ability to work both independently and collaboratively in a team-oriented environment, demonstrating a proactive approach to project management and problem-solving. Adaptability: Ability to thrive in a fast-paced, ever-evolving environment, managing multiple priorities and deadlines effectively. Ownership & Initiative: A self-starter with a strong sense of ownership over product designs and a passion for continuous improvement. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27865 Summary Position Overview The Facilities Engineering team within Cleveland Operations is responsible for planning, maintaining, and improving the infrastructure that supports our office, laboratory, and manufacturing environments. Our work ensures that every space operates safely, efficiently, and in alignment with organizational goals. As a Facilities Engineering Technician, you will play a key role in executing facility projects and supporting day-to-day operations. You'll collaborate with project managers and engineers to implement improvements, manage construction activities, and coordinate logistics such as relocations and contractor oversight. This position offers a hands-on opportunity to contribute to the reliability, safety, and functionality of our facilities while driving continuous improvement across all areas. Job Duties and Responsibilities Key Responsibilities: Assist project managers and engineers with construction activities, safety initiatives, and process improvements. Communicate construction plans to stakeholders and occupants, including details on temporary relocations, utility disruptions, construction zones, access changes, and noise mitigation strategies. Collaborate in a hands-on team environment to implement facility improvements, upgrades, and modifications. Promote and support Environmental, Health, and Safety (EHS) initiatives to maintain a safe and compliant workplace. Manage small to medium-sized projects and assist with capital projects under limited supervision. Provide support to other Facilities Team members as needed. Independently prioritize and complete office-related requests from internal customers. Assemble office furniture and workstations (e.g., desks, tables, filing cabinets, chairs) as required for projects. Operate or develop proficiency in facility equipment (e.g., forklifts, pallet jacks) for material handling tasks. Typical Assignments: Develop layouts and budgets for office, lab, or factory projects. Supervise and coordinate contractors during construction activities. Oversee completion of punch list items and ensure final occupancy readiness. Coordinate moves and project closeout activities. Source materials and products for facility projects. Address safety, environmental, and ergonomic concerns. Manage equipment removal, modification, and installation. Conduct contractor safety orientations. Perform additional tasks assigned by the supervisor. Basic Requirements Vocational Training and 5+ years' experience required; or GED with 7+ years in related field. (but does not require a university degree). Level IV; Vocational Training and 8+ years' experience required; or GED with 10+ years in related field. (but does not require a university degree). Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Has advanced and specialized expertise, typically developed through a combination of job-related training and considerable work experience in construction May act as a lead, coordinating and facilitating the work of others but is not a supervisor Works autonomously within established procedures and practices Capable of performing hands-on work as required Demonstrated experience with MS Office tools including Word, Excel, and PowerPoint Experience with AutoCAD preferred. Ability to work independently or as part of a team Demonstrate good judgment and make good decisions Self-motivated, and safety conscious Strong organizational skills Ability to handle a variety of assignments and changing priorities Good computer skills Strong written and oral communication skills Ability to occasionally work overtime, off shifts and between facilities in Northeastern Ohio Ability to be effective working extensively in any area with employees or contractors. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: ($68,300.00 - $109,300.00) Target Bonus: % Req ID: 27565 Purpose This position is responsible for the management and execution of cross-functional technical projects to ensure the project deliverables of scope, cost, and time are met. The outcome is very specific and measurable. Job Description (Duties and Responsibilities) Develop project plan and timelines and facilitate projects to keep projects on-track with time and deliverables Work with engineers, process groups and project coordinators to identify and resolve issues Develop project and visual tools required for effective project management and communication Lead and/or facilitate project meetings Report out projects to management Coordinate resources to ensure that projects adhere to scope, schedule, and budget Analyze project status and, when necessary, revise the scope, schedule, or budget to ensure that project requirements can be met Identify resource needs, allocation and work with engineering, process groups and process coordinators to align resources Assumes additional responsibilities as needed or directed in support of the Company's Strategy. Basic Requirements Bachelor of Science in a technical field. Engineering degree preferred or BS in Project Management 3+ years of experience involving projects, product development or project management Project Management Certification a plus Established project management and organizations skills Ability to lead a team of direct and indirect reports toward the successful completion of projects. Developed communication skills verbally and written with ability to articulate needs, successes and challenges Competencies Assigned by Job Code Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Coldwater Req ID: 28002 Job Responsibilities Position Summary: We are seeking applicants for a Trainee position which is an entry level Skilled Trades employee to perform general machine shop cleanup duties. This position is an opportunity to gain experience in a machine shop setting for an individual who would potentially grow into a member of LEA Coldwater's Apprenticeship Program. Role qualifications: • Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. • Be aware of the relevance and importance of their activities and how they contribute to the achievement of quality objectives. Position responsibilities: • Ensure cleanliness and organization of the manufacturing shop • Assist with set up and tear down of any company wide meeting • Perform other duties as assigned • Work well with helpers, Engineers, Management, and support functions Job Requirements Essential skills and experience: • Pending or earned High School Diploma • Vocational training in Machine Trades or equivalent preferred • Demonstrated aptitude for mechanical trades and applied mathematics • Demonstrated eagerness to work and learn metalworking • Basic mechanical knowledge of machines and tools • Commitment to company values. • Educational training and experience requirements may be modified at the Managements Team's discretion. Behavioral Traits: • Highly self-motivated and driven • Dependable • Organized • Active listener • Forward thinking attitude and the continual need to refine and polish work, by seeking to exceed customer and Company's expectations Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Coldwater Req ID: 27956 Position Summary Identify the manufacturing process, recommend the machinery concept, accurately develop the cost model, create quotations and provide other supporting information as needed to sell Lincoln Electric Automation-designed equipment. Role Qualifications Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. Play an active role reviewing and developing customer process requirements as it pertains to the application of our products. Play an active role in communicating issues that could impact customer satisfaction. Position Responsibilities Evaluate the feasibility of automation systems based on data supplied by Sales, Engineering, Management and Customers Develop manufacturing processes and concepts capable of producing systems or products Research and develop accurate cost estimates for Lincoln Electric Automation equipment. Write technical quotations and produce supporting documentation as needed. Assist as necessary with customer communication, presentations, and trade related events. Follow-up as necessary with sales, customers, and representatives. Responsible for following Department ISO procedures Essential Skills and Experience Minimum High School Diploma, Associate degree in technical discipline desired or equivalent years of experience. CAD (3D modeling a plus) Preferred 8-10 years of experience in manufacturing and design (mechanical/electrical) of industrial automated equipment. Metal forming (bending, forming, piercing, etc.) and metal joining (Laser, arc, resistance welding, etc.) experience preferred. Preferred 1-2 years of experience working with customers and suppliers. Proficient in Word, Excel and PowerPoint Effective writing and communication skills. Commitment to company values Educational, training, and experience requirements may be modified at the Managements Team's discretion Nonessential Skills and Experience Computer proficiency, including spreadsheet, word processing, and project management software. FMEA, Equipment Capability, Safety (OSHA Stds.) Environmental, Health & Safety (EH&S) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA & EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe and environmentally friendly manner and observe all company EHS procedures. Know that the company EHS procedures are located on the ISO drive. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures. Attend required EHS training Reporting to this position: No direct reports Physical Demands and Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work environment: The noise level in the work environment is usually moderate. ISO-14001 Complies with ISO 14001, and other relevant standards. Support, implement and understand the intent of the EMS policy. Participates with ISO-14001 as required. AS 9100 w/ ISO 9001 Complies with AS9100D and ISO 9001:2015 quality management system, procedures, and work instructions General sign-off: The employee is expected to adhere to all company policies. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.