Line Inspector jobs at Ready Pac Foods - 290 jobs

Who we are: The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products. Summary: The CMM Quality Inspector by using the Gill Process Documents (i.e.: GPS, GMS, GOS), performs essential duties to meet customer and AS9100 requirements and supports engineers with complex tasks. This position also works on quality-related projects with direction from the Quality Control Manager. Essential Duties and Responsibilities include the following. Other duties may be assigned. Follow company policies and procedures Comprehend and ensure compliance with internal quality documents, and customer specifications Read and understand customer specifications, process standards, drawings (blue prints), ANSI procedures, and industry standards. Coordinate with CNC production to inspect and rework parts in a timely matter. Must be able to setup, program, and operate Coordinate Measuring Machines, both traditional in-place and articulated-arm (Romer) devices. Proficient in reading blueprints, understanding GD&T, and working with associated technical documents. Proficient in the selection of appropriate hand-held and/or surface plate measuring equipment appropriate to the task. Comfortable providing instruction for the development of Inspection employees within the organization. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications and Education (Required) Functionally capable in the use of Microsoft Office and other basic computer software. Ability to comfortably multitask with minimal supervision. Ability to effectively communicate verbally and in writing Acceptable Vision Test results Hexagon Metrology coordinate measuring machine level 1 Working knowledge of PC-DMIS software ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee. The Gill Corporation is an Equal Opportunity Employer . Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances. The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department

Do you have an eye for attention to detail and an impeccable desire to enforce and maintain high standards of Quality? Then look no further and join the Quality Team at Advanced Cooling Technologies, Inc. (ACT) - nominated as a "Best Places to Work" in PA in 2023, York location. The Quality Team ACT is looking for team members who are passionate about creativity and innovation and looking to make a difference every day. We are committed to developing world class Quality Assurance programs, processes, and people that support the ACT mission and family of brands, including Tekgard Environmental Control Units. We have an immediate opening for a Quality Inspection in our York location. Company Overview Advanced Cooling Technologies, Inc. (ACT), with locations in York and headquartered in Lancaster, PA, is a leading manufacturer of innovative thermal management products for diverse applications, serving a broad spectrum of industries including commercial satellites, military vehicles, medical devices, primary calibration equipment, and HVAC systems. We are dedicated to fostering creativity, innovation, and making a tangible difference every day. Our commitment extends to our customers, employees, and community, with core values centered on Innovation, Teamwork, and Customer Care-key drivers of our continuous growth and success. At ACT, our skilled and dedicated staff is our most valuable resource. ACT offers a robust benefits package including low-cost medical, dental, vision, company-paid life and disability insurance, paid time off, a 401k with company match, and a profit-sharing bonus plan. Enjoy a work-life balance at our York location supported by a 4-day work week (4/10 schedule), generous PTO, and 8 paid holidays. Position Summary This position is for a Quality Inspector at our facility located in York, PA. As a Quality Inspector, you will play a hands-on role within the organization and interface with both Operations and Product Development teams while performing incoming inspection of materials and components and performing in-process and final inspections of products for commercial and/or government customers. Key Duties and Responsibilities * Inspect incoming materials * Perform in-process inspections and/or final inspections on manufactured product * Ensure all materials and product meet Quality standards as per policy and ISO9001/AS9100 procedures * Identify and segregate non-conformances and write non-conformance reports * Support Supplier Quality initiatives ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. Requirements * High School Diploma or GED * Ability to read and interpret blueprints and shop drawings * Ability to use basic inspection tools such as micrometers, calipers, height gages, etc. * Basic computer skills (Outlook, Word, Excel). * Basic math skills * Strong verbal and written communication skills Additional Qualifications (preferred): * Authorized to work in the US. US Citizen, Permanent Resident, or Protected Individual (as defined by 8 U.S.C. § 1324b(a)(3)) preferred due to ITAR responsibilities. * Prior experience with ERP systems

Job DescriptionDescription: Do you have an eye for attention to detail and an impeccable desire to enforce and maintain high standards of Quality? Then look no further and join the Quality Team at Advanced Cooling Technologies, Inc. (ACT) - nominated as a “Best Places to Work” in PA in 2023, York location. The Quality Team ACT is looking for team members who are passionate about creativity and innovation and looking to make a difference every day. We are committed to developing world class Quality Assurance programs, processes, and people that support the ACT mission and family of brands, including Tekgard Environmental Control Units. We have an immediate opening for a Quality Inspection in our York location. Company Overview Advanced Cooling Technologies, Inc. (ACT), with locations in York and headquartered in Lancaster, PA, is a leading manufacturer of innovative thermal management products for diverse applications, serving a broad spectrum of industries including commercial satellites, military vehicles, medical devices, primary calibration equipment, and HVAC systems. We are dedicated to fostering creativity, innovation, and making a tangible difference every day. Our commitment extends to our customers, employees, and community, with core values centered on Innovation, Teamwork, and Customer Care-key drivers of our continuous growth and success. At ACT, our skilled and dedicated staff is our most valuable resource. ACT offers a robust benefits package including low-cost medical, dental, vision, company-paid life and disability insurance, paid time off, a 401k with company match, and a profit-sharing bonus plan. Enjoy a work-life balance at our York location supported by a 4-day work week (4/10 schedule), generous PTO, and 8 paid holidays. Position Summary This position is for a Quality Inspector at our facility located in York, PA. As a Quality Inspector, you will play a hands-on role within the organization and interface with both Operations and Product Development teams while performing incoming inspection of materials and components and performing in-process and final inspections of products for commercial and/or government customers. Key Duties and Responsibilities Inspect incoming materials Perform in-process inspections and/or final inspections on manufactured product Ensure all materials and product meet Quality standards as per policy and ISO9001/AS9100 procedures Identify and segregate non-conformances and write non-conformance reports Support Supplier Quality initiatives ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. Requirements: High School Diploma or GED Ability to read and interpret blueprints and shop drawings Ability to use basic inspection tools such as micrometers, calipers, height gages, etc. Basic computer skills (Outlook, Word, Excel). Basic math skills Strong verbal and written communication skills Additional Qualifications (preferred): Authorized to work in the US. US Citizen, Permanent Resident, or Protected Individual (as defined by 8 U.S.C. § 1324b(a)(3)) preferred due to ITAR responsibilities. Prior experience with ERP systems

PRIMARY FUNCTION Inspect manufactured parts for dimensional and visual quality using a go-no-go gauge or plug gauges Observe and learn proper use of gauges Clean and maintain tools and work area Documentation of serviceable or unserviceable products Inspect simple jobs unassisted, highly repetitive inspection following standardized procedures Visually inspect or checks parts using direct reading instruments GENERAL Must have basic knowledge of blueprint reading Parts are warm and oily Instructed by chief inspector in regards to identifying acceptable quality Must have good arithmetic ability, and good working knowledge of decimals and fractions

Performs a variety of inspection procedures to ensure quality levels at various stages of manufacturing at or above the standard. Support the organization goals in achieving total customer satisfaction. Duties & Responsibilities: * Inspect in-process or finished production assemblies and sub-assemblies for conformance to quality assurance standards * working from blueprint, engineering change notices, or established operating procedures determine acceptance or rejection or rework requirements of a part * may evaluate new procedures for non-standard rest and perform special set-up on new equipment * assist others in correcting or preventing deficiencies in quality or workmanship * give work direction to other inspectors * know your customers expectations and drive action to meet them * perform first article process * identify component * perform related work as assigned Job Qualifications: Education: Secondary/High School, Certificate Diploma Experience: 6+ Years preferably in Quality Required skill: PCBA Experienced Able to use measurement equipment. Must be able to read ECO/Dev instruction/build drawer and BOM. Familiar with SMT and identify component, IPC 610 Knowledge and preferred IPC Cert. Familiar w/ First Piece and First Article process. Job Competencies: * Attention to detail * Communication skills - verbal and written * Organizing * Judgement * Data collection, management and analysis * Team work * Ability to interpret complex customer rules and regulations * Demonstrated skills in project management and ability to train others to lead projects * Works well independently * Excellent interpersonal and communication skills * Ability to mange time and prioritize multiple task in a fast paced environment * Proficient in use of MS Office applications, MS Project, Outlook * May require international travel and international business experience * Knowledge of Lean manufacturing fundamentals

Job Description Performs a variety of inspection procedures to ensure quality levels at various stages of manufacturing at or above the standard. Support the organization goals in achieving total customer satisfaction. Duties & Responsibilities: Inspect in-process or finished production assemblies and sub-assemblies for conformance to quality assurance standards working from blueprint, engineering change notices, or established operating procedures determine acceptance or rejection or rework requirements of a part may evaluate new procedures for non-standard rest and perform special set-up on new equipment assist others in correcting or preventing deficiencies in quality or workmanship give work direction to other inspectors know your customers expectations and drive action to meet them perform first article process identify component perform related work as assigned Job Qualifications: Education: Secondary/High School, Certificate Diploma Experience: 6+ Years preferably in Quality Required skill: PCBA Experienced Able to use measurement equipment. Must be able to read ECO/Dev instruction/build drawer and BOM. Familiar with SMT and identify component, IPC 610 Knowledge and preferred IPC Cert. Familiar w/ First Piece and First Article process. Job Competencies: Attention to detail Communication skills - verbal and written Organizing Judgement Data collection, management and analysis Team work Ability to interpret complex customer rules and regulations Demonstrated skills in project management and ability to train others to lead projects Works well independently Excellent interpersonal and communication skills Ability to mange time and prioritize multiple task in a fast paced environment Proficient in use of MS Office applications, MS Project, Outlook May require international travel and international business experience Knowledge of Lean manufacturing fundamentals

The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. SUMMARY: The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. The QC inspector will have knowledge of galvanizing quality, on-grip process, and quality, as well as acceptable manufacturing standards. The QC inspector will be required to know and implement the NAAMM standards. Quality Control Inspector in assigned Business Units. Work with all levels of the organization including, the Business Unit Manager, Supervisors, and Associates to create a smooth, defect-free process. Sample production from every station to significantly reduce/eliminate escapes from your assigned Business Unit. Approve and/or perform first-article inspections on a job requiring this level of oversight. Assure all associates are trained/certified (if required) to operate to perform the tasks they are being asked to perform. Assist in the training, development, and/or creation of proper training materials as required. Perform any required QCHECKs in the Business Unit. The measurement of effectiveness will be a reduction of IRRs in the Inspector's assigned Business Unit and no escapes from the Inspector's assigned Business Unit to other areas. Inspect output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and examining functionality. Using gauges such as tape measure, calipers, and micrometers to measure products and assure Quality is built into the product. Reviewing blueprints and specifications to compare to produced goods. Check that the production line adheres to standards and procedures and complies with the Customer standards. Ask the Question: "Is there an SOP for this Process". Record inspection results by recording job numbers of inspected parts, summarizing issues and actions taken to keep production running with no significant pauses in the process. Use iAuditor to record the jobs inspected. Significant reworks, re-makes, and wastes will be input to the IRR System as needed. Helping train the production team on quality control measures to improve product excellence. Assist Associates in Transaction Control (Epicor). Help Associates attain defect-free entries. Monitor transactions to verify that the Associates are performing the task as required. Propose improvements to the production process. Assisting in the development of test methods and inspection plans. Help determine the causes of product defects and reworks. During product inspections, verify all equipment is calibrated correctly. Monitor the scrap hoppers three times during your shift and advise of any abnormalities. When needed, assist in the Sales Order Deviation Process. Always review issues immediately with the Business Unit Manager, Supervisors, and Quality Manager. This job description does not describe all activities, duties, responsibilities, or physical demands that are required of the employee for this job. Likewise, the work environment described is merely representative. Duties, responsibilities, activities, physical demands, and work environment may change at any time with or without notice. ESSENTIAL DUTIES/RESPONSIBILITIES: Read travelers to ensure quantity, grating type, material type, finish, and any special quality notes are accurate. Inspect the quality of grating for all specified jobs. Reject any product that is not within specifications. Work with Production to repair the product if possible. Document non-conformance and report/return to the business unit or origin. Implement NAAMM standards. Support correction as needed. Knowledge of IRR process. Evaluate internal processes and suggest ideas for improvement. Update IRR process documents as changes occur. Review sales order packets using the five-point checklist application. Back up Quality Assurance as needed. Performs other related duties as assigned. EDUCATION, WORK EXPERIENCE, AND PROFICIENCIES: Requires a high school diploma or equivalent is required. The candidate must have strong computer skills in Microsoft Office Suite (Word, Excel, and Outlook). In addition, one or more years of experience with a manufacturing facility. The candidate must have excellent reasoning skills, be detail-oriented, accurate and complete assignments on time with little supervision. Must take initiative and be a self-starter. Must have knowledge of galvanizing quality, on-grip process, and quality as well as acceptable manufacturing standards. Experience with ERP systems and knowledge of internal processes and procedures is preferred. EEO STATEMENT: Ohio Gratings, Inc. is an equal opportunity employer and affords equal opportunity to all applicants without regard to race, color, religion, gender, national origin, age, disability, veteran status, or any other characteristic or status protected under local, state, or federal laws.

Perform daily incoming/outgoing quality inspections as required by repair procedures. RESPONSIBILITIES Maintain quality inspection and performance documentation Advise repair team of corrective actions to correct repair quality issues Ensure adherence to standards relating to assembly revision levels, repair procedures, and quality standards Ensure proper packaging and shipment of repaired components as required by documented procedures Create and modify repair records as needed Daily computer input into business system, (SAP), of all aspects of the shipping process Perform all work with safety in mind and ensure that all safety measures are met QUALIFICATIONS HS Diploma/GED Two years of experience in shipping and receiving Additional three to five years' experience in assembly Vertiv training on documentation, repair procedures, and quality specifications Working knowledge of Microsoft Office applications and ability to utilize existing business systems such as SAP The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $5 billion in sales, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.

Subsidiary: KIRA Services / T&H Services Job Title:Quality Control Inspector Labor Category: Non-Exempt Clearance Level: No - Public Trust / Tier 1 (As Applicable) Travel Requirement: 50% At Tlingit Haida Tribal Business Corporation (THTBC), your work goes beyond the job description-it becomes part of a purpose-driven legacy. Our continuous commitment to growth directly contributes to the strength, resilience, and future of the communities we support. Our growth fuels programs, services, and lasting value for the Tribe, making every success a shared one. For over 35 years THTBC and its subsidiaries has delivered essential services to federal clients across the globe. Whether supporting logistics, information technology, cyber security, or facilities operations, we are united by a shared mission: to create meaningful economic opportunity and growth of the Tlingit & Haida Tribes of Alaska. Together We Grow - One Mission, One Team - With a Commitment to Serve Scope of Work: Perform quality system audits and verifications of contractual specifications and applicable regulations in direct support of the CBP AZ Regional Facility Maintenance and Repair project site. Responsibilities: May perform any combination of the following duties: Conduct onsite inspections and audits on contract requirements, and other services performed. Schedule inspection activities. Prepare and maintain reports and support the development of quality plans. Document and track daily operations by using a computer maintenance programs(e.g., Maximo). Follow prescribed quality assurance/quality control procedures. Read and understand contract documents including plans and specifications. Adhere to company policies, procedures, and safety regulations. Perform other duties as assigned. Minimum Requirements: The technicians shall have 3 years' experience performing Quality Control inspections on building equipment and systems. Previous Journeyman-Level work experience in the commercial construction industry in the skilled trades including Electrical, Carpentry, Plumbing, HVAC. Must be able to travel to different site locations (Tucson/Yuma) to provide in-person support. Proficiency in Microsoft Office Suite (Word, Excel, Outlook); experience with work order systems such as Maximo preferred. Effective written and verbal communication skills. Must be able to satisfactorily complete a Tier 1 Public Trust background check, if required for the position. Must be able to maintain the ability to access the government worksite. Must possess and maintain a valid state driver's license and a safe driving record, in accordance with company policy, to operate vehicles or equipment as required for the position. Physical Demands / Work Environment: Ability to sit or stand for extended periods while working at a computer or desk. Frequent use of hands for typing, data entry, and handling paperwork. Must be able to work on-call, alternate, and extended shift schedules when necessary to meet the mission requirements, including weekends and holidays. Work is performed in and around maintenance activity, which may include exposure to typical industrial or facility operations environments. All candidates must successfully complete pre-employment screening, which may include but is not limited to a criminal background check, motor vehicle record review, and a 5-panel drug test, in accordance with company policy and applicable laws. Benefits: We offer a flexible benefits package including medical, dental, and vision plans, TRICARE Supplemental, critical illness coverage, employee discounts, wellness seminars, company-paid life and short-term disability insurance, optional long-term disability, paid leave, a 401(k) plan, and identity theft protection to support your health and financial well-being. For represented positions, the benefits and leave offered will be as defined under the applicable Collective Bargaining Agreement. Equal Employment Opportunity: We are proud to be an equal opportunity employer and comply with all applicable federal, state, and local employment laws. All applicants will be considered for employment without regard to race, color, religion, creed, national origin, gender, gender identity, age, marital status, sexual orientation, veteran status, disability, pregnancy, parental status, or any other characteristic protected by law. Reasonable Accommodation: If you have a disability or medical condition and need reasonable accommodation, please inform the designated recruiter during the hiring process.

Job Description PRIMARY FUNCTION Inspect manufactured parts for dimensional and visual quality using a go-no-go gauge or plug gauges Observe and learn proper use of gauges Clean and maintain tools and work area Documentation of serviceable or unserviceable products Inspect simple jobs unassisted, highly repetitive inspection following standardized procedures Visually inspect or checks parts using direct reading instruments GENERAL Must have basic knowledge of blueprint reading Parts are warm and oily Instructed by chief inspector in regards to identifying acceptable quality Must have good arithmetic ability, and good working knowledge of decimals and fractions

SummaryThe Quality Control Inspector is responsible for all incoming materials to ensure they meet quality standards before being shipped out to customers. They also inspect products at every stage of production to guarantee final product meets customer specifications.Job Description We are the makers of possible BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it's no small feat. It takes the imagination and passion of all of us-from design and engineering to the manufacturing and marketing of our billions of MedTech products per year-to look at the impossible and find transformative solutions that turn dreams into possibilities. We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you'll be supported to learn, grow and become your best self. Become a maker of possible with us. Responsibilities: Complete and file quality records including receiving files and non-conforming material reports. Proficiency in working alongside other departments when addressing problems or discrepancies and maintaining detailed records Count, weigh or measure items of incoming shipments in order to verify information against invoices, orders, or other records Experience reading mechanical drawings and able to verify parts dimensions against drawing/specification requirements Examine and unpack incoming shipments; record shortages and reject damaged items Examine incoming shipments to ensure they meet specifications Ability to use various measurement devices (e.g., calipers, pin gauges, go/no-go gauges, micrometers, etc.) Excellent mechanical proficiency and keen attention to detail Ability to optimally interpret data and present as information and respond to questions from engineers and other technical staff Ensure that all documents and material received in the incoming inspection are of satisfactory quality Other duties as assigned Qualifications: High School Diploma required Minimum 2 years' experience in quality control Working knowledge of Microsoft Office Suite including Word, Excel, PowerPoint and Outlook Strong communication skills both verbal and written Ability to multitask and prioritize work activities based upon financial impact to desired business goals Demonstrated problem solving skills required At BD, we prioritize on-site collaboration because we believe it fosters creativity, innovation, and effective problem-solving, which are essential in the fast-paced healthcare industry. For most roles, we require a minimum of 4 days of in-office presence per week to maintain our culture of excellence and ensure smooth operations, while also recognizing the importance of flexibility and work-life balance. Remote or field-based positions will have different workplace arrangements which will be indicated in the job posting. For certain roles at BD, employment is contingent upon the Company's receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD's Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law. Why Join Us? A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It's also a place where we help each other be great, we do what's right, we hold each other accountable, and learn and improve every day. To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you'll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place. To learn more about BD visit ********************** Becton, Dickinson, and Company is an Equal Opportunity Employer. We evaluate applicants without regard to race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, and other legally-protected characteristics. #earlycareer Required Skills Optional Skills . Primary Work LocationUSA PA - ZelienopleAdditional LocationsWork Shift

Full-time Description Perform finished product inspections by confirming specifications, conducting visual and measurement tests and rejecting and documenting unacceptable products. Maintain quality standards by performing in-process and finished products. Visually inspect products to ensure they are meeting requirements and specifications. Perform incoming inspection of components in accordance with company standards. Perform product testing/inspection. Complete final inspection of products prior to shipment. Fulfill customer component order inspection. Document all inspection results and any re-work that must be completed. Thrives in a fast-paced work environment, managing multiple priorities with speed, adaptability, and attention to detail. Additional projects/ roles/ responsibilities assigned by management. Requirements High school diploma or equivalent 3+ years of QC experience in cable and wire harnesses Must be able to use gauges, calipers, micrometers, rulers Basic math and computer skills Must be able to read blueprints Experience working in an engineering/manufacturing environment and/or Quality Management System experience, a plus. Salary Description $23.25 - $27.75

We are hiring and looking for a talented individual with hands-on experience in a QC role for a job shop/manufacturing environment position. Must have experience with quality inspections, blue prints, in process inspections, first article inspections, final inspections, and much more! Requirements Must have 3 yrs + QC experience working in a manufacturing environment Must have 3+ years of experience with measuring instruments such as micrometers, V-blocks, sine bars, calipers, dial indicators, angle plates, snap gauge, gauge blocks, height gage, level protractors, optical comparators, bore gages, etc. Faro Arm/Laser experience is highly preferred Must have very solid GD&T and math aptitude Must have a great work ethic, collaborative, team player Must have strong blue print reading skills Born in US, or INS certificate of naturalization REQUIRED Thanks for your interest in Magna Machine! EEO Disabilities/Veterans

Job DescriptionDescription: We are hiring and looking for a talented individual with hands-on experience in a QC role for a job shop/manufacturing environment position. Must have experience with quality inspections, blue prints, in process inspections, first article inspections, final inspections, and much more! Requirements: Must have 3 yrs + QC experience working in a manufacturing environment Must have 3+ years of experience with measuring instruments such as micrometers, V-blocks, sine bars, calipers, dial indicators, angle plates, snap gauge, gauge blocks, height gage, level protractors, optical comparators, bore gages, etc. Faro Arm/Laser experience is highly preferred Must have very solid GD&T and math aptitude Must have a great work ethic, collaborative, team player Must have strong blue print reading skills Born in US, or INS certificate of naturalization REQUIRED Thanks for your interest in Magna Machine! EEO Disabilities/Veterans

BEA Americas delivers sensors, solutions, and accessories for activation and safety in several market segments including pedestrian and industrial automatic doors, vehicle gates and barriers, transportation, security and retail sensing applications. The Quality Control Inspector I is responsible for incoming and outgoing inspections to ensure BEA's quality standards are met. Attention to detail and excellent communications skills (both written and verbal) are critical in this role. The Quality Control Inspector I will be an Ideal Team Player who supports our mission to build a convenient, safe, automated world and works to achieve our vision of continued growth and market expansion. Primary Duties and Responsibilities: Conduct incoming inspection to validate arriving material meets BEA's quality standards with moderate supervision Conduct outgoing inspection to validate material moved through the production process meets BEA's quality standards with moderate supervision Accurately input data into appropriate data storage locations for all inspected material Validate incoming and outgoing inspection documentation is available, organized, and complete Provide In-Process Inspections as needed Provide training and support for the Production team for quality-related process steps and other topics as needed. Qualifications: To perform this position successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and /or ability required. Associate's degree in Electronics or equivalent experience is required, with demonstrated level of technical capability and responsibility. Very good written and verbal communication skills are required. Proficiency in Microsoft Office is required, particularly Word and Excel. Demonstrated capability as a self-starter in a hands-on environment is required #BEAAMERICA

Full-time Description About Generant: Initially founded in the early 1930's, Generant designs and manufactures valves and pressure regulators for a wide variety of industries with a strong position in the Industrial Gases and Cryogenics, Medical Gases and Equipment, Energy, and Chemicals markets. Generant is 100% employee-owned and is headquartered in Butler, NJ where most valve and regulator products are manufactured. We look for dedicated and talented people who accept the responsibilities of thinking like owners and embrace our mission as stated in our Quality Policy: “Our Goal is to provide our customers, suppliers and employees true value. We believe this can only be accomplished through a strong commitment to continuous improvement in the quality of our products, services and working environment.” Our ideal candidates: Are people who are personally motivated to produce high-quality work Are lifelong learners - driven to continually improve Are well organized Enjoy working in a team environment Join our growing team and be a part of our journey! Generant is looking for a 3rd shift Quality Control Inspector Join our growing company! 3rd shift is Monday - Friday. 11:00pm - 07:30am Job Summary: The primary function of the Quality Control Inspector is to help assure the quality of finished goods and conformance to product requirements. This is accomplished by inspecting parts, checking calibration status of measurement devices, and documenting inspections and nonconformance. Essential Functions: · Conduct First Article Inspection and in-process inspections of products to ensure compliance with quality standards and specifications. · Maintain Calibration of Metrology Tools · Perform In-Process inspections, Final Inspection, Raw Material Inspection - Bar Stock, Inspection of Incoming Purchased Parts, and Outside Process Inspection · Data Entry into Quality Databases · Interpret mechanical drawings · Communicate product and material nonconformances to management. · Identify and report any deviations from quality standards to the appropriate personnel · Collaborate with production teams to resolve quality issues and implement corrective actions · Conduct root cause analysis and implement preventive measures to minimize defects and improve product quality · Maintain accurate records of inspections, test results, and quality documentation. · Assist in the development and implementation of quality control procedures and processes · Other duties as assigned Requirements Qualifications: Education/Experience/Skills: · High School Diploma or equivalent · 2+ years as a Quality Control Inspector in a manufacturing environment that produces metal pieces · Able to read and interpret engineering drawings · Must have a complete knowledge of metrology equipment and their uses including micrometers, calipers, indicators, depth micrometers, gauge pins, thread gauges and optical comparators · Advanced Math Skills · Strong knowledge of Statistical Process Control (SPC) techniques and tools · Familiarity with quality control standards and regulations · Must be able to work in a fast-paced environment · Excellent attention to detail and analytical skills · Ability to work independently and as part of a team · Fluent in English (Good Verbal and Written Communication Skills) · Ability to carryout detailed, written and verbal instructions Physical Demands: · Must frequently lift up to 25 pounds and occasionally lift up to 75 pounds · When performing the duties of this job, the employee is regularly required to sit, use hands to finger or handle or feel objects and tools or controls and talk or hear · Employee is frequently required to reach with hands and arms · Employee is occasionally required to stand, walk, stoop, kneel, crouch, or crawl · Specific vision abilities require close vision, distant vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Work Environment: · Inspector works near moving mechanical parts and is occasionally exposed to vibration · Noise level is usually moderate for a manufacturing plant Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Benefits: Medical, Dental, Vision, Employee Stock Ownership Plan (ESOP), 401k, Life and AD&D Insurance Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: Perform inspection of materials, processes and final product, per business need. Generates inspection reports according to AS9100 requirements. Enter inspection data into systems. Utilizes inspection tools including calipers, gauges and testing equipment (CMM). Reads and interprets drawings, procedures and work instructions. Identifies areas for improvement in inspection processes and coordinates implementation. Comply with all safety requirements; participate in safety training/practices. Qualifications: 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. Understanding of QA requirements, processes, practices and systems. Demonstrated ability to work in team-based environments. Ability to read engineering drawings to determine and measure features and tolerances. Strong written and verbal communication skills in English. Software experience; Excel, Word, Power Point, etc. Bilingual - English/Spanish Perks and Benefits: Desired first shift schedule Premium Health Insurance - $0 employee premium & $0 deductible Company provided life insurance for all employees with $0 employee contribution Dental 10 paid holidays 5 paid sick days Accrued vacation 401(k) Profit Sharing Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.

Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: * Perform inspection of materials, processes and final product, per business need. * Generates inspection reports according to AS9100 requirements. * Enter inspection data into systems. * Utilizes inspection tools including calipers, gauges and testing equipment (CMM). * Reads and interprets drawings, procedures and work instructions. * Identifies areas for improvement in inspection processes and coordinates implementation. * Comply with all safety requirements; participate in safety training/practices. Qualifications: * 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. * Understanding of QA requirements, processes, practices and systems. * Demonstrated ability to work in team-based environments. * Ability to read engineering drawings to determine and measure features and tolerances. * Strong written and verbal communication skills in English. * Software experience; Excel, Word, Power Point, etc. * Bilingual - English/Spanish Perks and Benefits: * Desired first shift schedule * Premium Health Insurance - $0 employee premium & $0 deductible * Company provided life insurance for all employees with $0 employee contribution * Dental * 10 paid holidays * 5 paid sick days * Accrued vacation * 401(k) * Profit Sharing * Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.

Job Description Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: Perform inspection of materials, processes and final product, per business need. Generates inspection reports according to AS9100 requirements. Enter inspection data into systems. Utilizes inspection tools including calipers, gauges and testing equipment (CMM). Reads and interprets drawings, procedures and work instructions. Identifies areas for improvement in inspection processes and coordinates implementation. Comply with all safety requirements; participate in safety training/practices. Qualifications: 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. Understanding of QA requirements, processes, practices and systems. Demonstrated ability to work in team-based environments. Ability to read engineering drawings to determine and measure features and tolerances. Strong written and verbal communication skills in English. Software experience; Excel, Word, Power Point, etc. Bilingual - English/Spanish Perks and Benefits: Desired first shift schedule Premium Health Insurance - $0 employee premium & $0 deductible Company provided life insurance for all employees with $0 employee contribution Dental 10 paid holidays 5 paid sick days Accrued vacation 401(k) Profit Sharing Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER. Job Posted by ApplicantPro