Find The Best Refrigeration Operator Jobs For You

Where do you want to work?

0 selections

Top Refrigeration Operator Skills

Below we've compiled a list of the most important skills for a refrigeration operator. We ranked the top skills based on the percentage of refrigeration operator resumes they appeared on. For example, 25.6% of refrigeration operator resumes contained ammonia as a skill. Let's find out what skills a refrigeration operator actually needs in order to be successful in the workplace.

Want to find jobs that match your skillset?
Get recommendations that fit your preferences and skillset. We’ll recommend jobs that fit your skills and key steps to help you stand out to employers. Answer a few questions and get started.
The six most common skills found on Refrigeration Operator resumes in 2020. Read below to see the full list.

1. Ammonia

high Demand

Here's how Ammonia is used in Refrigeration Operator jobs:
  • Tasked with operation and maintenance of industrial ammonia refrigeration system and steam boiler.
  • Maintained and operated a two stage ammonia refrigeration system.
  • Executed the installation of ammonia equipment.
  • Analyze and Respond appropriately to fire, ammonia, and health emergency based on company policy.
  • Operated and maintained an industrial ammonia fed blast freezer to process several types of vegetables.
  • Operate and maintain an ammonia freezer system, with temp at -25 degrees.
  • Help with the Installation of a 150 Ton Package Ammonia refrigeration system.
  • Installed, maintained and repaired boiler and ammonia refrigeration systems and devices.
  • Communicate well with others.show a high level of respect for ammonia.
  • Start up the ammonia refrigeration system and pump it down daily2.
  • Pump out and drained oil from 2-stage ammonia refrigeration system.
  • Checked the ammonia levels in the system.
  • Receive ammonia when system was low.
  • Maintained proper temperatures for plant and coolers by running Frick (Ammonia) machines ran and maintained 18 machines daily.
  • Monitor ammonia refrigeration system, refrigerant compressors, pumps, high/low pressure vessels, and Glycol Evaporator system.
  • Assist in operation and maintenance of a 90,000 pound ammonia refrigeration system per SOPs and PSM standards.
  • Work with vendors for electrical motor repair, ammonia sensor calibration, and hazardous waste removal.
  • Operate 44,000 pound 2 stage ammonia refrigeration system.
  • Maintain the necessary MSDS logs when receiving ammonia.
  • Respond to all levels of ammonia haz-mat situations.

Show More

2. Freon

high Demand

Here's how Freon is used in Refrigeration Operator jobs:
  • Operated and maintained ammonia refrigeration, Freon refrigeration and building maintenance.
  • Maintain records of Freon usage according to regulatory requirements.
  • Utilized tools (socket wrenches, cutters, screwdrivers, welding torches), dollies, and Freon to perform installation.
  • Schedule wise servicing of the external units, checking the HVAC Freon and cooling oil levels and adjusting them.
  • Maintain and repair various refrigeration systems and components including Ammonia and Freon systems.
  • Service and repair Freon system that are charged with R-22 and another that's charged with R-402.

Show More

3. PSM

high Demand

PSM stands for Process Safety Regulations. It involves executing a healthy and compact PSM system. The main goal of process safety management (PSM) of extremely dangerous chemicals is to limit undesired discharges of hazardous chemicals particularly into areas that could expose workers and others to serious uncertainties. It is all about working with critical thinking skills to deal with the problem logically. Also, investigating options, avoiding biases, and concentrating on essential data to make useful outcomes.

Here's how PSM is used in Refrigeration Operator jobs:
  • Direct 14-element, plant-wide Process Safety Management (PSM) program and own planning/scheduling development for continuous improvement objectives.
  • Developed PSM team for handling ongoing system integrity and safety in a collaborative environment.
  • Participated in and assisted in completion of recommendations of Compliance Audit of the facility PSM Program.
  • Assisted in planning and implementation of PSM program and coordinating work with contractors on projects.
  • Update PLC, Microprocessor Control, PSM and PM programs.
  • Understand and verify all PSM elements are being met.

Show More

4. Hvac

high Demand

Here's how Hvac is used in Refrigeration Operator jobs:
  • Use of computerized system to schedule repairs, track projects, and monitor and evaluate HVAC system.
  • Maintained and repaired refrigeration systems including two ammonia systems, seven conventional refrigeration units and commercial HVAC.
  • Maintain and repair comfort cooling HVAC and process cooling according to industry and EPA guidelines utilizing in-house technicians and outside services.
  • Conducted installation, repairs, and preventive maintenance on HVAC portable systems for rapid deployment, radar sites.
  • Travel to remote sites to set up chillers, refrigeration, HVAC, and high voltage electrical equipment.
  • Supervised a building HVAC Maintenance Crew and support groups during peak maintenance activities.

Show More

5. Osha

high Demand

Osha stands for Occupational Safety and Health Administration that is a large regulatory agency based in the USA. This agency was created in 1971 and its basic aim is to ensure safe and healthy working conditions for working men and women. Osha had the authority of doing surprise visits to inspect and examine the working conditions in workplaces. They have been successful in reducing injury rates and improving worker conditions.

Here's how Osha is used in Refrigeration Operator jobs:
  • Followed OSHA compliance's including valve tagging, and pipe labeling, all corresponding with the P&ID's.
  • Assisted in organizing, Implementing, and maintaining the facilities OSHA Process Safety Management and EPA Risk Management programs.
  • Conducted a wide range of ship repairs on A/C units in accord with OSHA regulations.
  • Performed monthly shop safety inspections and ensured that shop was maintained at OSHA standards.
  • Operated in compliance with OSHA to uphold site safety and regulations.
  • Applied OSHA regulation on job sites and within shop.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Refrigeration Equipment

average Demand

Refrigeration equipment consists of various parts such as the condenser, compressor, expansion devices, and evaporator. These equipment work together to remove heat caused by the hot vapor refrigerant discharged from the compressor.

Here's how Refrigeration Equipment is used in Refrigeration Operator jobs:
  • Evaluate status of refrigeration equipment daily.
  • Operated and maintained refrigeration equipment.
  • Trouble shoot and repair all refrigeration equipment such the 14 blast cells and all evaporators and condensers
  • Diagnose, Repair, and Maintain Refrigeration equipment in proper shape.
  • Established problem-solving maintenance activities related commercial refrigeration equipment.
  • Serviced and installed commercial refrigeration equipment

Show More

7. Air Compressors

average Demand

Here's how Air Compressors is used in Refrigeration Operator jobs:
  • Monitor refrigeration and compressors for a production plant.
  • Repair compressors, blower units, motors, pumps, condensers, coils, and other units.
  • Cleaned all cooling towers and checked oil in all chillers and compressors and the generators.
  • Start up freezer compressors, hydraulic pumps, and air compressor for first shift production.
  • Assisted with maintenance of compressors and boosters.
  • Replace compressors, motors and all components.
  • Installed compressors and soldered liquid copper lines.
  • Operated 2- 3000 Ton compressors.
  • water process, fire systems (wet and dry), air compressors and cardboard balers.
  • Maintained and operated Imeco Condenser Towers / Boilers /Air Compressors /Tunnel Freezers /Spiral Cage Freezers.

Show More

8. NH3

average Demand

Here's how NH3 is used in Refrigeration Operator jobs:
  • Operate NH3 systems and boilers.
  • Project Manager Conversion to NH3, American Seafoods

Show More

9. Safety Devices

average Demand

Here's how Safety Devices is used in Refrigeration Operator jobs:
  • Inspect and test refrigeration system, safety devices, and controls periodically.

Show More

10. Iiar

average Demand

Here's how Iiar is used in Refrigeration Operator jobs:
  • Work in a safe manner consistent with all Company rules and good work practices as specified by IIAR.

Show More

Find which skills are in demand

Skill Page Callout

Jobs With Trending Skills

11. Engine Room

average Demand

An engine room serves as the heart of an establishment or vessel. It must be maintained in good and working conditions to ensure operations run smoothly and efficiently according to guidelines and protocols.

Here's how Engine Room is used in Refrigeration Operator jobs:
  • harvest watch.purging rooms for CA...engine room logs.and PIDS.
  • Maintain cleanliness of engine room and machinery rooms as well as integrity of valves, controls, etc.
  • Maintained showroom conditions in my engine rooms and its machinery at all times.
  • Monitor and adjust if necessary the high side and the low side suction pressures in all (4) engine rooms.
  • Maintain and monitor engine room.
  • Maintain (32) ammonia compressors in (3) engine rooms.

Show More

12. Water Pumps

low Demand

Here's how Water Pumps is used in Refrigeration Operator jobs:
  • Install water pumps, compressors, motors, temperature controls and piping.
  • Installed and replaced motors, water pumps, switches, safety controls and fuses.
  • Rebuild water pumps replace pump seals.
  • Installed, rebuilt and replaced waste water pumps, motors, steam valves and refrigeration valves.
  • Maintain and rebuild/replace water pumps, refrigerant pumps, valves, heat exchanger, condenser towers, and compressor.
  • Perform inspection on chiller units refrigerant charge, chil lwater pumps, hot water pumps, compressor oil level.

Show More

13. Air Systems

low Demand

Here's how Air Systems is used in Refrigeration Operator jobs:
  • Maintain and repair plant compressed air system.
  • Check system efficiency, balance air systems.

Show More

14. Electrical Systems

low Demand

Here's how Electrical Systems is used in Refrigeration Operator jobs:
  • Operate and maintain electrical systems and controls for industrial refrigeration system.
  • Maintained and repaired residential and commercial electrical systems, and residential refrigerators, stoves, and dishwashers.
  • Installed Electrical Systems in Residential and Commercial Facilities.
  • Excelled in troubleshooting mechanical and electrical systems.
  • Welded and assembled all refrigeration parts and assembled electrical systems per schematics and assisted with trouble shooting units while in test.
  • Install, maintain, trouble shoot, and repair air conditioning and heating systems, refrigeration systems, and electrical systems.

Show More

15. Trouble Shooting

low Demand

Troubleshooting is a term that refers to the process of solving any kind of problem. Troubleshooting is done in order to determine the problem which may be hindering the operations or functionality of a machine or system.

Here's how Trouble Shooting is used in Refrigeration Operator jobs:
  • Trouble shooting deficiencies in the system i.e.
  • Advanced trouble shooting, customer relations, Refrigeration service and maintenance
  • Worked in Service for short period trouble shooting, replacement of compressors, fan motors, reversing valves etc.
  • Demonstrated mechanical aptitude, trouble shooting skills, and ability to read diagrams and schematics.
  • Trained new technicians on proper trouble shooting and repair techniques on our clients equipment.
  • Skilled in: diagnosing and trouble shooting error codes on the units.

Show More

16. General Maintenance

low Demand

General maintenance is the regular check-up and repairs of machinery, buildings, and other mechanical equipment. General maintenance is performed by repair workers who are skilled to handle the day-to-day defects produced in the machinery. General maintenance aims to make sure the items remain in the best operational conditions. Usually, a set of planned activities are performed regularly by an expert to monitor the maintenance.

Here's how General Maintenance is used in Refrigeration Operator jobs:
  • Performed other general maintenance duties as required.
  • General Maintenance of Refrigeration Systems NH3
  • Perform general maintenance and overhaul of pneumatic system.
  • General maintenance of building and machines, including electrical, plumbing, masonry, tile replacement, carpentry and painting.
  • General maintenance including plumbing, MIG-welding, repairing auto lock overhead trailer doors and light carpenter work.
  • Repaired customer's mobile units, PM new installs, general maintenance of the shop.

Show More

top-skills
What skills help Refrigeration Operators find jobs?
Tell us what job you are looking for, we’ll show you what skills employers want. Get Started

Online Courses For Refrigeration Operators

One of the best ways to acquire the skills needed to be a refrigeration operator is to take an online course. We've identified some online courses from Udemy and Coursera that will help you advance in your career. Since refrigeration operators benefit from having skills like ammonia, freon, and psm, we found courses that will help you improve these skills.

Advertising Disclosure
advertising-disclosure
HVAC Fundamentals and BMS Controls
udemy
4.4
(404)

Build your knowledge systematically, from the working principles of HVAC to optimizing a chiller plant operation...

Centrifugal pumps: Principles, Operation and Design
udemy
4.4
(694)

A complete understanding of construction details and functioning of centrifugal pumps for successful plant operation...

Efficient HVAC Systems
edX (Global)

In this course you will start by identifying the different steps a HVAC (Heating, Ventilation and Air Conditioning) engineers need to follow to come to a proper design while collaborating with the architect. You will then learn how to distribute heat and cold using air and water systems, what temperature levels to use in both and how that relates to the type of energy supply and to the thermal quality of the building construction. You will further deepen your knowledge on air handling units and...

OSHA Workplace Safety (General Industry 6 Hr Class)
udemy
4.5
(1,884)

Learn the requirements and standards associated with OSHA and workplace safety. Safety best practices for the workplace...

OSHA Safety Pro: Personal Protective Equipment
udemy
4.4
(1,283)

Impress management or get that job with you your ability to display life and dollar saving work place safety practices...

Electrical Power Equipment
udemy
4.7
(531)

Learn how electrical equipments operate and how they fit together into a network...

OSHA Safety Pro: Deadly Concrete Dust. Crystalline Silica.
udemy
4.6
(266)

OSHA's General, Construction, and Maritime Industries Hazard Prevention and Safety Standard...

OSHA Safety Pro: Trenching Excavation & Soil Mechanics
udemy
4.3
(567)

A quick yet detailed certification in OSHA safety with a focus on Trenching, Excavation, & Soil Mechanics...

Operating Systems Concept and Design Principles for Beginner
udemy
3.7
(302)

Concepts and design principles modern Operating System...

HVAC/R Simulations for Field Technicians
ed2go

HVAC/R Simulations for Field Technicians...

SAP PM Plant Maintenance (beginner to advanced level) 2021
udemy
4.1
(383)

Learn SAP PM (Plant Maintenance) module in a step-by-step manner with practical examples. Become SAP PM Consultant today...

Electronic & Electrical Devices Maintenance & Troubleshooting
udemy
4.2
(364)

This course will give you everything you need to start playing with electronics components and fix electronic devices...

PLC Programming - Training from Scratch on RSLogix500 & 5000
udemy
4.5
(1,289)

PLC programming from scratch training class by a controls engineer equipped with PLC systems - Allen Bradley RSLogix 500...

PLC At Home - For Electrical and Control Engineers
udemy
4.7
(306)

Design from A-Z control projects using Arduino, Soft PLC, HMI, VFD, ModBus TCP and Electrical panel with full simulation...

HVAC/R Technician (Voucher Included)
ed2go

HVAC/R Technician (Voucher Included)...

Biofuel Production Operations
ed2go

Biofuel Production Operations...

Electrical Control & Protection Systems
udemy
4.6
(1,086)

This course introduces electrical control & protection systems which are a critical part of any electrical substation...

HVAC/R Certified Technician (Voucher Included)
ed2go

HVAC/R Certified Technician (Voucher Included)...

Operations Management A-Z: Business Processes and Systems
udemy
4.5
(413)

Operations Management: Supply Chain & Business Processes in Industry for Manufacturing and Services Organizations...

Unit Operations in Chemical Engineering
udemy
4.2
(447)

Learn the most important Unit Operations in Chemical Plants...

20 Most Common Skill For A Refrigeration Operator

Ammonia25.6%
Freon14%
PSM12.9%
Hvac9.8%
Osha6.8%
Refrigeration Equipment5.9%
Air Compressors5.4%
NH34.5%

Typical Skill-Sets Required For A Refrigeration Operator

RankascdescSkillascdescPercentage of ResumesPercentageascdesc
1
1
Ammonia
Ammonia
25.6%
25.6%
2
2
Freon
Freon
14%
14%
3
3
PSM
PSM
12.9%
12.9%
4
4
Hvac
Hvac
9.8%
9.8%
5
5
Osha
Osha
6.8%
6.8%
6
6
Refrigeration Equipment
Refrigeration Equipment
5.9%
5.9%
7
7
Air Compressors
Air Compressors
5.4%
5.4%
8
8
NH3
NH3
4.5%
4.5%
9
9
Safety Devices
Safety Devices
2.2%
2.2%
10
10
Iiar
Iiar
2%
2%
11
11
Engine Room
Engine Room
1.9%
1.9%
12
12
Water Pumps
Water Pumps
1.7%
1.7%
13
13
Air Systems
Air Systems
1.7%
1.7%
14
14
Electrical Systems
Electrical Systems
1.4%
1.4%
15
15
Trouble Shooting
Trouble Shooting
1.2%
1.2%
16
16
General Maintenance
General Maintenance
1.2%
1.2%
17
17
PLC
PLC
0.5%
0.5%
18
18
Emergency
Emergency
0.5%
0.5%
19
19
FES
FES
0.3%
0.3%
20
20
GMP
GMP
0.2%
0.2%

13,402 Refrigeration Operator Jobs

Where do you want to work?